Showing 1–6 of 6 results for author: Bloss, M

C3D: Cascade Control with Change Point Detection and Deep Koopman Learning for Autonomous Surface Vehicles

Authors: Jianwen Li, Hyunsang Park, Wenjian Hao, Lei Xin, Jalil Chavez-Galaviz, A**kya Chaudhary, Meredith Bloss, Kyle Pattison, Christopher Vo, Devesh Upadhyay, Shreyas Sundaram, Shaoshuai Mou, Nina Mahmoudian

Abstract: In this paper, we discuss the development and deployment of a robust autonomous system capable of performing various tasks in the maritime domain under unknown dynamic conditions. We investigate a data-driven approach based on modular design for ease of transfer of autonomy across different maritime surface vessel platforms. The data-driven approach alleviates issues related to a priori identifica… ▽ More In this paper, we discuss the development and deployment of a robust autonomous system capable of performing various tasks in the maritime domain under unknown dynamic conditions. We investigate a data-driven approach based on modular design for ease of transfer of autonomy across different maritime surface vessel platforms. The data-driven approach alleviates issues related to a priori identification of system models that may become deficient under evolving system behaviors or shifting, unanticipated, environmental influences. Our proposed learning-based platform comprises a deep Koopman system model and a change point detector that provides guidance on domain shifts prompting relearning under severe exogenous and endogenous perturbations. Motion control of the autonomous system is achieved via an optimal controller design. The Koopman linearized model naturally lends itself to a linear-quadratic regulator (LQR) control design. We propose the C3D control architecture Cascade Control with Change Point Detection and Deep Koopman Learning. The framework is verified in station kee** task on an ASV in both simulation and real experiments. The approach achieved at least 13.9 percent improvement in mean distance error in all test cases compared to the methods that do not consider system changes. △ Less

Submitted 25 March, 2024; v1 submitted 9 March, 2024; originally announced March 2024.

Comments: This work has been submitted to the IEEE for possible publication. Copyright may be transferred without notice, after which this version may no longer be accessible

Evaluating a strategy for measuring deformations of the primary reflector of the Green Bank telescope using a terrestrial laser scanner

Authors: Pedro Salas, Paul Marganian, Joe Brandt, Andrew Seymour, John Shelton, Nathan Sharp, Laura Jensen, Marty Bloss, Carla Beaudet, Dennis Egan, Nathaniel Sizemore, David T. Frayer, Frederic R. Schwab, Felix J. Lockman

Abstract: Astronomical observations in the molecule rich 3 mm window using large reflector antennas provide a unique view of the Universe. To efficiently carry out these observations gravitational and thermal deformations have to be corrected. Terrestrial laser scanners have been used to measure the deformations in large reflector antennas due to gravity, but have not yet been used for measuring thermal def… ▽ More Astronomical observations in the molecule rich 3 mm window using large reflector antennas provide a unique view of the Universe. To efficiently carry out these observations gravitational and thermal deformations have to be corrected. Terrestrial laser scanners have been used to measure the deformations in large reflector antennas due to gravity, but have not yet been used for measuring thermal deformations. In this work we investigate the use of a terrestrial laser scanner to measure thermal deformations on the primary reflector of the Green Bank Telescope (GBT). Our method involves the use of differential measurements to reduce the systematic effects of the terrestrial laser scanner. We use the active surface of the primary reflector of the GBT to validate our method and explore its limitations. We find that when using differential measurements it is possible to accurately measure deformations corresponding to different Zernike polynomials down to an amplitude of 60 $μ$m. The difference between the amplitudes of known deformations and those measured are $<140~μ$m when the wind speed is $\lesssim2$ m s$^{-1}$. From these differences we estimate that it should be possible to bring the surface error of the GBT down to $240\pm6~μ$m. This suggests that using a commercial off-the-shelf terrestrial laser scanner it is possible to measure deformations induced by thermal gradients on a large parabolic reflector. △ Less

Submitted 8 March, 2022; originally announced March 2022.

Comments: 16 pages, 8 figures, accepted for publication in Advanced Control for Applications

The Breakthrough Listen Search for Intelligent Life: A Wideband Data Recorder System for the Robert C. Byrd Green Bank Telescope

Authors: David H. E. MacMahon, Danny C. Price, Matthew Lebofsky, Andrew P. V. Siemion, Steve Croft, David DeBoer, J. Emilio Enriquez, Vishal Gajjar, Gregory Hellbourg, Howard Isaacson, Dan Werthimer, Zuhra Abdurashidova, Marty Bloss, Ramon Creager, John Ford, Ryan S. Lynch, Ronald J. Maddalena, Randy McCullough, Jason Ray, Mark Whitehead, Dave Woody

Abstract: The Breakthrough Listen Initiative is undertaking a comprehensive search for radio and optical signatures from extraterrestrial civilizations. An integral component of the project is the design and implementation of wide-bandwidth data recorder and signal processing systems. The capabilities of these systems, particularly at radio frequencies, directly determine survey speed; further, given a fixe… ▽ More The Breakthrough Listen Initiative is undertaking a comprehensive search for radio and optical signatures from extraterrestrial civilizations. An integral component of the project is the design and implementation of wide-bandwidth data recorder and signal processing systems. The capabilities of these systems, particularly at radio frequencies, directly determine survey speed; further, given a fixed observing time and spectral coverage, they determine sensitivity as well. Here, we detail the Breakthrough Listen wide-bandwidth data recording system deployed at the 100-m aperture Robert C. Byrd Green Bank Telescope. The system digitizes up to 6 GHz of bandwidth at 8 bits for both polarizations, storing the resultant 24 GB/s of data to disk. This system is among the highest data rate baseband recording systems in use in radio astronomy. A future system expansion will double recording capacity, to achieve a total Nyquist bandwidth of 12 GHz in two polarizations. In this paper, we present details of the system architecture, along with salient configuration and disk-write optimizations used to achieve high-throughput data capture on commodity compute servers and consumer-class hard disk drives. △ Less

Submitted 20 July, 2017; v1 submitted 19 July, 2017; originally announced July 2017.

The GBT 67 -- 93.6 GHz Spectral Line Survey of Orion-KL

Authors: D. T. Frayer, Ronald J. Maddalena, M. Meijer, L. Hough, S. White, R. Norrod, G. Watts, M. Stennes, R. Simon, D. Woody, S. Srikanth, M. Pospieszalski, E. Bryerton, M. Whitehead, P. Ford, M. Mello, M. Bloss

Abstract: We present a 67--93.6 GHz spectral line survey of Orion-KL with the new 4 mm Receiver on the Green Bank Telescope (GBT). The survey reaches unprecedented depths and covers the low-frequency end of the 3 mm atmospheric window which has been relatively unexplored previously. The entire spectral-line survey is published electronically for general use by the astronomical community. The calibration and… ▽ More We present a 67--93.6 GHz spectral line survey of Orion-KL with the new 4 mm Receiver on the Green Bank Telescope (GBT). The survey reaches unprecedented depths and covers the low-frequency end of the 3 mm atmospheric window which has been relatively unexplored previously. The entire spectral-line survey is published electronically for general use by the astronomical community. The calibration and performance of 4 mm Receiver on the GBT is also summarized. △ Less

Submitted 4 February, 2015; originally announced February 2015.

Comments: 14 pages, including 4 figures and 4 tables. Accepted for publication in AJ. The supplementary material including the complete calibrated spectrum is available online from AJ upon publication ([email protected])

RRI-GBT Multi-Band Receiver: Motivation, Design & Development

Authors: Yogesh Maan, Avinash A. Deshpande, Vinutha Chandrashekar, Jayanth Chennamangalam, K. B. Raghavendra Rao, R. Somashekar, Gary Anderson, M. S. Ezhilarasi, S. Sujatha, S. Kasturi, P. Sandhya, Jonah Bauserman, R. Duraichelvan, Shahram Amiri, H. A. Aswathappa, Indrajit V. Barve, G. Sarabagopalan, H. M. Ananda, Carla Beaudet, Marty Bloss, Deepa B. Dhamnekar, Dennis Egan, John Ford, S. Krishnamurthy, Nikhil Mehta , et al. (10 additional authors not shown)

Abstract: We report the design and development of a self-contained multi-band receiver (MBR) system, intended for use with a single large aperture to facilitate sensitive & high time-resolution observations simultaneously in 10 discrete frequency bands sampling a wide spectral span (100-1500 MHz) in a nearly log-periodic fashion. The development of this system was primarily motivated by need for tomographic… ▽ More We report the design and development of a self-contained multi-band receiver (MBR) system, intended for use with a single large aperture to facilitate sensitive & high time-resolution observations simultaneously in 10 discrete frequency bands sampling a wide spectral span (100-1500 MHz) in a nearly log-periodic fashion. The development of this system was primarily motivated by need for tomographic studies of pulsar polar emission regions. Although the system design is optimized for the primary goal, it is also suited for several other interesting astronomical investigations. The system consists of a dual-polarization multi-band feed (with discrete responses corresponding to the 10 bands pre-selected as relatively RFI-free), a common wide-band RF front-end, and independent back-end receiver chains for the 10 individual sub-bands. The raw voltage time-sequences corresponding to 16 MHz bandwidth each for the two linear polarization channels and the 10 bands, are recorded at the Nyquist rate simultaneously. We present the preliminary results from the tests and pulsar observations carried out with the Green Bank Telescope using this receiver. The system performance implied by these results, and possible improvements are also briefly discussed. △ Less

Submitted 5 December, 2012; v1 submitted 9 October, 2012; originally announced October 2012.

Comments: 25 pages, 12 figures and 1 Table, Accepted for publication in ApJS

Advanced Multi-beam Spectrometer for the Green Bank Telescope

Authors: D. Anish Roshi, Marty Bloss, Patrick Brandt, Srikanth Bussa, Hong Chen, Paul Demorest, Gregory Desvignes, Terry Filiba, Richard J. Fisher, John Ford, David Frayer, Robert Garwood, Suraj Gowda, Glenn Jones, Billy Mallard, Joseph Masters, Randy McCullough, Guifre Molera, Karen O'Neil, Jason Ray, Simon Scott, Amy Shelton, Andrew Siemion, Mark Wagner, Galen Watts , et al. (2 additional authors not shown)

Abstract: A new spectrometer for the Green Bank Telescope (GBT) is being built jointly by the NRAO and the CASPER, University of California, Berkeley. The spectrometer uses 8 bit ADCs and will be capable of processing up to 1.25 GHz bandwidth from 8 dual polarized beams. This mode will be used to process data from focal plane arrays. The spectrometer supports observing mode with 8 tunable digital sub-bands… ▽ More A new spectrometer for the Green Bank Telescope (GBT) is being built jointly by the NRAO and the CASPER, University of California, Berkeley. The spectrometer uses 8 bit ADCs and will be capable of processing up to 1.25 GHz bandwidth from 8 dual polarized beams. This mode will be used to process data from focal plane arrays. The spectrometer supports observing mode with 8 tunable digital sub-bands within the 1.25 GHz bandwidth. The spectrometer can also be configured to process a bandwidth of up to 10 GHz with 64 tunable sub-bands from a dual polarized beam. The vastly enhanced backend capabilities will support several new science projects with the GBT. △ Less

Submitted 4 February, 2012; originally announced February 2012.

Comments: To appear in the Proceedings of the XXXth URSI General Assembly in Istanbul, August 2011, 4 pages; 3 figures