-
Mass spectrometric investigations into 3D printed parts to assess radiopurity as ultralow background materials for rare event physics detectors
Authors:
Amanda D. French,
Sonia Alcantar Anguiano,
Mary Bliss,
Josef Christ,
Maria Laura di Vacri,
Rebecca Erikson,
Khadouja Harouaka,
Eric W. Hoppe,
Jay W. Grate,
Isaac J. Arnquist
Abstract:
New data are reported for polyvinylidene fluoride (PVDF), polyphenylene sulfide (PPS), and two forms of polyetherimide (PEI, branded ULTEM 1010 and 9085). Data for starting filaments and both simple and complex printed parts are reported. PVDF filaments and simple printed beads, were found to have values of approximately 30 and 50 ppt for Th-232 and U-238, respectively, while a more complex spring…
▽ More
New data are reported for polyvinylidene fluoride (PVDF), polyphenylene sulfide (PPS), and two forms of polyetherimide (PEI, branded ULTEM 1010 and 9085). Data for starting filaments and both simple and complex printed parts are reported. PVDF filaments and simple printed beads, were found to have values of approximately 30 and 50 ppt for Th-232 and U-238, respectively, while a more complex spring clip part had slightly elevated Th-232 levels of 65 ppt, with U-238 remaining at 50 ppt. PPS filament was found to have concentrations of 270 and 710 ppt for Th-232 and U-238, respectively, and were not chosen to be printed as those levels were already higher than other material options. ULTEM 1010 filaments and printed complex spring clip parts were found to have concentrations of around 5 and 7 ppt for Th-232 and U-238, respectively, illustrating no significant contamination from the printing process. ULTEM 9085 filaments were found to have concentrations of around 9 and 5 ppt for Th-232 and U-238, respectively, while the printed complex spring clip part was found to have slightly elevated concentrations of 25 and 7 ppt for Th-232 and U-238, respectively. These results were all obtained using a novel dry ashing method in crucibles constructed of ultralow background electroformed copper or, when applicable, microwave-assisted wet ashing digestion. Samples and process blanks were spiked with Th-229 and U-233 as internal standards prior to dry/wet ashing and determinations were made by inductively coupled plasma mass spectrometry (ICP-MS). In order to maintain high radiopurity levels, pre-cleaning the filaments before printing and post-cleaning the parts is recommended, although the printing process itself has shown to contribute very minute amounts of radiocontaminants.
△ Less
Submitted 27 July, 2022;
originally announced July 2022.
-
Mass spectrometric analyses of high performance polymers to assess radiopurity as ultra low background materials for rare event physics detectors
Authors:
Jay W. Grate,
Isaac J. Arnquist,
Eric W. Hoppe,
Mary Bliss,
Khadouja Harouaka,
Maria Laura di Vacri,
Sonia Alcantar Anguiano
Abstract:
The mass concentrations of Th-232 and U-238 in several strong, unfilled, high performance polymers are reported as measures of their radiopurity. Highly radiopure polymers are required as dielectric materials in the construction of rare event physics detectors, in order to minimize background signals arising from the detector materials themselves. New data are reported for carefully sourced sample…
▽ More
The mass concentrations of Th-232 and U-238 in several strong, unfilled, high performance polymers are reported as measures of their radiopurity. Highly radiopure polymers are required as dielectric materials in the construction of rare event physics detectors, in order to minimize background signals arising from the detector materials themselves. New data are reported for carefully sourced samples of polyetheretherketone (PEEK), polyetherketoneketone (PEKK), a polyamide imide (PAI, branded as Torlon) and polybenzimidazole (PBI). Data for solid polyetherimide (PEI) are also discussed and new data for PEI in the form of a commercial 3D printing filament stock are reported. Strong high performance polymers PEKK, PBI, PAI and PEI were found with levels for Th-232 and U-238 that are below one milliBq/kg, including the PEI 3D printing filament. Specifically, for Th-232 and U-238 respectively, in microBq/kg, we found values of 149 and 184 for Arkema Kepstan PEKK 6002 flake; 69 and 2250 for Solvay Ketaspire PEEK flake; 346 and 291 for PBI Performance Products low metals grade 100 mesh PBI powder; 66 and 105 for Drake Plastics PAI Torlon T-4200 pellets; 401 and 285 for Drake Plastics cured PAI rod; 32 and 41 for Ensinger PEI Ultem 1000 solid; and 15 and 85 microBq/kg, for ThermaX PEI Ultem 1010 filament material. These results were all obtained using a novel dry ashing method in crucibles constructed of ultra low background (ULB) electroformed copper. Samples were spiked with T-229h and U-233 as internal standards prior to ashing and determinations were made by inductively coupled plasma mass spectrometry (ICP-MS). Radiopurity is displayed graphically relative to numerical measures of mechanical strength for these and several other polymers.
△ Less
Submitted 6 July, 2020;
originally announced July 2020.
-
MAESTRO-X: Distributed Orchestration of Rotary-Wing UAV-Relay Swarms
Authors:
Bharath Keshavamurthy,
Matthew Bliss,
Nicolò Michelusi
Abstract:
This work details a scalable framework to orchestrate a swarm of rotary-wing UAVs serving as cellular relays to facilitate beyond line-of-sight connectivity and traffic offloading for ground users. First, a Multiscale Adaptive Energy-conscious Scheduling and TRajectory Optimization (MAESTRO) framework is developed for a single UAV. Aiming to minimize the time-averaged latency to serve user request…
▽ More
This work details a scalable framework to orchestrate a swarm of rotary-wing UAVs serving as cellular relays to facilitate beyond line-of-sight connectivity and traffic offloading for ground users. First, a Multiscale Adaptive Energy-conscious Scheduling and TRajectory Optimization (MAESTRO) framework is developed for a single UAV. Aiming to minimize the time-averaged latency to serve user requests, subject to an average UAV power constraint, it is shown that the optimization problem can be cast as a semi-Markov decision process, and exhibits a multiscale structure: outer actions on radial wait velocities and terminal service positions minimize the long-term delay-power trade-off, optimized via value iteration; given these outer actions, inner actions on angular wait velocities and service trajectories minimize a short-term delay-energy cost. A novel hierarchical competitive swarm optimization scheme is developed in the inner optimization, to devise high-resolution trajectories via iterative pair-wise updates. Next, MAESTRO is eXtended to UAV swarms (MAESTRO-X) via scalable policy replication: enabled by a decentralized command-and-control network, the optimal single-agent policy is augmented with spread maximization, consensus-driven conflict resolution, adaptive frequency reuse, and piggybacking. Numerical evaluations show that, for user requests of 10 Mbits, generated according to a Poisson arrival process with rate 0.2 req/min/UAV, single-agent MAESTRO offers 3.8x faster service than a high-altitude platform and 29% faster than a static UAV deployment; moreover, for a swarm of 3 UAV-relays, MAESTRO-X delivers data payloads 4.7x faster than a successive convex approximation scheme; and remarkably, a single UAV optimized via MAESTRO outclasses 3 UAVs optimized via a deep-Q network by 38%.
△ Less
Submitted 4 February, 2023; v1 submitted 2 July, 2020;
originally announced July 2020.
-
Power-Constrained Trajectory Optimization for Wireless UAV Relays with Random Requests
Authors:
Matthew Bliss,
Nicolò Michelusi
Abstract:
This paper studies the adaptive trajectory design of a rotary-wing UAV serving as a relay between ground nodes dispersed in a circular cell and generating uplink data transmissions randomly according to a Poisson process, and a central base station. We seek to minimize the expected average communication delay to service the data transmission requests, subject to an average power constraint on the…
▽ More
This paper studies the adaptive trajectory design of a rotary-wing UAV serving as a relay between ground nodes dispersed in a circular cell and generating uplink data transmissions randomly according to a Poisson process, and a central base station. We seek to minimize the expected average communication delay to service the data transmission requests, subject to an average power constraint on the mobility of the UAV. The problem is cast as a semi-Markov decision process, and it is shown that the policy exhibits a two-scale structure, which can be efficiently optimized: in the outer decision, upon starting a communication phase, and given its current radius, the UAV selects a target end radius position so as to optimally balance a trade-off between average long-term communication delay and power consumption; in the inner decision, the UAV selects its trajectory between the start radius and the selected end radius, so as to greedily minimize the delay and energy consumption to serve the current request. Numerical evaluations show that, during waiting phases, the UAV circles at some optimal radius at the most energy efficient speed, until a new request is received. Lastly, the expected average communication delay and power consumption of the optimal policy is compared to that of several heuristics, demonstrating a reduction in latency by over 50% and 20%, respectively, compared to static and mobile heuristic schemes.
△ Less
Submitted 27 February, 2020; v1 submitted 21 February, 2020;
originally announced February 2020.
-
Trajectory Optimization for Rotary-Wing UAVs in Wireless Networks with Random Requests
Authors:
Matthew Bliss,
Nicolò Michelusi
Abstract:
This paper studies the trajectory optimization problem in a scenario where a single rotary-wing UAV acts as a relay of data payloads for downlink transmission requests generated randomly by two ground nodes (GNs) in a wireless network. The goal is to optimize the UAV trajectory in order to minimize the expected average communication delay to serve these random requests. It is shown that the proble…
▽ More
This paper studies the trajectory optimization problem in a scenario where a single rotary-wing UAV acts as a relay of data payloads for downlink transmission requests generated randomly by two ground nodes (GNs) in a wireless network. The goal is to optimize the UAV trajectory in order to minimize the expected average communication delay to serve these random requests. It is shown that the problem can be cast as a semi-Markov decision process (SMDP), and the resulting minimization problem is solved via multi-chain policy iteration. The optimality of a two-scale optimization approach is proved: the optimal trajectory in the communication phase greedily minimizes the communication delay of the current request while moving between the current start position and a target end position (inner optimization); the end positions are selected to minimize the expected average long-term delay in the SMDP (outer optimization). Numerical simulations show that the expected average delay is minimized when the UAV moves towards the geometric center of the GNs during phases in which it is not actively servicing transmission requests, and demonstrate significant improvements over sensible heuristics. Finally, it is revealed that the optimal end positions of communication phases become increasingly independent of the data payload, for large data payload values.
△ Less
Submitted 21 August, 2019; v1 submitted 5 May, 2019;
originally announced May 2019.
-
Naturally occurring $^{32}$Si and low-background silicon dark matter detectors
Authors:
J. L. Orrell,
I. J. Arnquist,
M. Bliss,
R. Bunker,
Z. S. Finch
Abstract:
The naturally occurring radioisotope $^{32}$Si represents a potentially limiting background in future dark matter direct-detection experiments. We investigate sources of $^{32}$Si and the vectors by which it comes to reside in silicon crystals used for fabrication of radiation detectors. We infer that the $^{32}$Si concentration in commercial single-crystal silicon is likely variable, dependent up…
▽ More
The naturally occurring radioisotope $^{32}$Si represents a potentially limiting background in future dark matter direct-detection experiments. We investigate sources of $^{32}$Si and the vectors by which it comes to reside in silicon crystals used for fabrication of radiation detectors. We infer that the $^{32}$Si concentration in commercial single-crystal silicon is likely variable, dependent upon the specific geologic and hydrologic history of the source (or sources) of silicon "ore" and the details of the silicon-refinement process. The silicon production industry is large, highly segmented by refining step, and multifaceted in terms of final product type, from which we conclude that production of $^{32}$Si-mitigated crystals requires both targeted silicon material selection and a dedicated refinement-through-crystal-production process. We review options for source material selection, including quartz from an underground source and silicon isotopically reduced in $^{32}$Si. To quantitatively evaluate the $^{32}$Si content in silicon metal and precursor materials, we propose analytic methods employing chemical processing and radiometric measurements. Ultimately, it appears feasible to produce silicon detectors with low levels of $^{32}$Si, though significant assay method development is required to validate this claim and thereby enable a quality assurance program during an actual controlled silicon-detector production cycle.
△ Less
Submitted 19 February, 2018; v1 submitted 31 July, 2017;
originally announced August 2017.
