-
Tuning the supercurrent distribution in parallel ballistic graphene Josephson junctions
Authors:
Philipp Schmidt,
Luca Banszerus,
Benedikt Frohn,
Stefan Blien,
Kenji Watanabe,
Takashi Taniguchi,
Andreas K. Hüttel,
Bernd Beschoten,
Fabian Hassler,
Christoph Stampfer
Abstract:
We report on a ballistic and fully tunable Josephson junction system consisting of two parallel ribbons of graphene in contact with superconducting MoRe. By electrostatic gating of the two individual graphene ribbons we gain control over the real space distribution of the superconducting current density, which can be continuously tuned between both ribbons. We extract the respective gate dependent…
▽ More
We report on a ballistic and fully tunable Josephson junction system consisting of two parallel ribbons of graphene in contact with superconducting MoRe. By electrostatic gating of the two individual graphene ribbons we gain control over the real space distribution of the superconducting current density, which can be continuously tuned between both ribbons. We extract the respective gate dependent spatial distributions of the real space current density by employing Fourier- and Hilbert transformations of the magnetic field induced modulation of the critical current. This approach is fast and does not rely on a symmetric current profile. It is therefore a universally applicable tool, potentially useful for carefully adjusting Josephson junctions.
△ Less
Submitted 18 October, 2023;
originally announced October 2023.
-
Optomechanical coupling and dam** of a carbon nanotube quantum dot
Authors:
N. Hüttner,
S. Blien,
P. Steger,
A. N. Loh,
R. Graaf,
A. K. Hüttel
Abstract:
Carbon nanotubes are excellent nano-electromechanical systems, combining high resonance frequency, low mass, and large zero-point motion. At cryogenic temperatures they display high mechanical quality factors. Equally they are outstanding single electron devices with well-known quantum levels and have been proposed for the implementation of charge or spin qubits. The integration of these devices i…
▽ More
Carbon nanotubes are excellent nano-electromechanical systems, combining high resonance frequency, low mass, and large zero-point motion. At cryogenic temperatures they display high mechanical quality factors. Equally they are outstanding single electron devices with well-known quantum levels and have been proposed for the implementation of charge or spin qubits. The integration of these devices into microwave optomechanical circuits is however hindered by a mismatch of scales, between typical microwave wavelengths, nanotube segment lengths, and nanotube deflections. As experimentally demonstrated recently in [Blien et al., Nat. Comm. 11, 1363 (2020)], coupling enhancement via the quantum capacitance allows to circumvent this restriction. Here we extend the discussion of this experiment. We present the subsystems of the device and their interactions in detail. An alternative approach to the optomechanical coupling is presented, allowing to estimate the mechanical zero point motion scale. Further, the mechanical dam** is discussed, hinting at hitherto unknown interaction mechanisms.
△ Less
Submitted 3 November, 2023; v1 submitted 5 April, 2023;
originally announced April 2023.
-
Minigap and Andreev bound states in ballistic graphene
Authors:
Luca Banszerus,
Florian Libisch,
Andrea Ceruti,
Stefan Blien,
Kenji Watanabe,
Takashi Taniguchi,
Andreas K. Hüttel,
Bernd Beschoten,
Fabian Hassler,
Christoph Stampfer
Abstract:
A finite-size normal conductor, proximity-coupled to a superconductor has been predicted to exhibit a so-called minigap, in which quasiparticle excitations are prohibited. Here, we report on the direct observation of such a minigap in ballistic graphene, coupled to superconducting MoRe leads. The minigap is probed by finite bias spectroscopy through a weakly coupled junction in the graphene region…
▽ More
A finite-size normal conductor, proximity-coupled to a superconductor has been predicted to exhibit a so-called minigap, in which quasiparticle excitations are prohibited. Here, we report on the direct observation of such a minigap in ballistic graphene, coupled to superconducting MoRe leads. The minigap is probed by finite bias spectroscopy through a weakly coupled junction in the graphene region and its value is given by the dimensions of the device. Besides the minigap, we observe a distinct peak in the differential resistance, which we attribute to weakly coupled Andreev bound states (ABS) located near the superconductor-graphene interface. For weak magnetic fields, the phase accumulated in the normal-conducting region shifts the ABS in quantitative agreement with predictions from tight-binding calculations based on the Bogolioubov-de Gennes equation as well as with an analytical semiclassical model.
△ Less
Submitted 21 April, 2021; v1 submitted 23 November, 2020;
originally announced November 2020.
-
Quantum capacitance mediated carbon nanotube optomechanics
Authors:
Stefan Blien,
Patrick Steger,
Niklas Hüttner,
Richard Graaf,
Andreas K. Hüttel
Abstract:
Cavity optomechanics allows the characterization of a vibration mode, its cooling and quantum manipulation using electromagnetic fields. Regarding nanomechanical as well as electronic properties, single wall carbon nanotubes are a prototypical experimental system. At cryogenic temperatures, as high quality factor vibrational resonators, they display strong interaction between motion and single-ele…
▽ More
Cavity optomechanics allows the characterization of a vibration mode, its cooling and quantum manipulation using electromagnetic fields. Regarding nanomechanical as well as electronic properties, single wall carbon nanotubes are a prototypical experimental system. At cryogenic temperatures, as high quality factor vibrational resonators, they display strong interaction between motion and single-electron tunneling. Here, we demonstrate large optomechanical coupling of a suspended carbon nanotube quantum dot and a microwave cavity, amplified by several orders of magnitude via the nonlinearity of Coulomb blockade. From an optomechanically induced transparency (OMIT) experiment, we obtain a single photon coupling of up to $g_0=2π\cdot 95\,\textrm{Hz}$. This indicates that normal mode splitting and full optomechanical control of the carbon nanotube vibration in the quantum limit is reachable in the near future. Mechanical manipulation and characterization via the microwave field can be complemented by the manifold physics of quantum-confined single electron devices.
△ Less
Submitted 3 April, 2020; v1 submitted 27 April, 2019;
originally announced April 2019.
-
Quartz tuning-fork based carbon nanotube transfer into quantum device geometries
Authors:
S. Blien,
P. Steger,
A. Albang,
N. Paradiso,
A. K. Hüttel
Abstract:
With the objective of integrating single clean, as-grown carbon nanotubes into complex circuits, we have developed a technique to grow nanotubes directly on commercially available quartz tuning forks using a high temperature CVD process. Multiple straight and aligned nanotubes bridge the >100um gap between the two tips. The nanotubes are then lowered onto contact electrodes, electronically charact…
▽ More
With the objective of integrating single clean, as-grown carbon nanotubes into complex circuits, we have developed a technique to grow nanotubes directly on commercially available quartz tuning forks using a high temperature CVD process. Multiple straight and aligned nanotubes bridge the >100um gap between the two tips. The nanotubes are then lowered onto contact electrodes, electronically characterized in situ, and subsequently cut loose from the tuning fork using a high current. First quantum transport measurements of the resulting devices at cryogenic temperatures display Coulomb blockade characteristics.
△ Less
Submitted 16 May, 2018; v1 submitted 20 March, 2018;
originally announced March 2018.
-
Towards carbon nanotube growth into superconducting microwave resonator geometries
Authors:
S. Blien,
K. J. G. Götz,
P. L. Stiller,
T. Mayer,
T. Huber,
O. Vavra,
A. K. Hüttel
Abstract:
The in-place growth of suspended carbon nanotubes facilitates the observation of both unperturbed electronic transport spectra and high-Q vibrational modes. For complex structures integrating, e.g., superconducting rf elements on-chip, selection of a chemically and physically resistant material that survives the chemical vapor deposition (CVD) process provides a challenge. We demonstrate the imple…
▽ More
The in-place growth of suspended carbon nanotubes facilitates the observation of both unperturbed electronic transport spectra and high-Q vibrational modes. For complex structures integrating, e.g., superconducting rf elements on-chip, selection of a chemically and physically resistant material that survives the chemical vapor deposition (CVD) process provides a challenge. We demonstrate the implementation of molybdenum-rhenium coplanar waveguide resonators that exhibit clear resonant behaviour at cryogenic temperatures even after having been exposed to nanotube growth conditions. The properties of the MoRe devices before and after CVD are compared to a reference niobium device.
△ Less
Submitted 10 June, 2016;
originally announced June 2016.
-
Co-sputtered MoRe thin films for carbon nanotube growth-compatible superconducting coplanar resonators
Authors:
K. J. G. Götz,
S. Blien,
P. L. Stiller,
O. Vavra,
T. Mayer,
T. Huber,
T. N. G. Meier,
M. Kronseder,
Ch. Strunk,
A. K. Hüttel
Abstract:
Molybdenum rhenium alloy thin films can exhibit superconductivity up to critical temperatures of $T_c=15\mathrm{K}$. At the same time, the films are highly stable in the high-temperature methane / hydrogen atmosphere typically required to grow single wall carbon nanotubes. We characterize molybdenum rhenium alloy films deposited via simultaneous sputtering from two sources, with respect to their c…
▽ More
Molybdenum rhenium alloy thin films can exhibit superconductivity up to critical temperatures of $T_c=15\mathrm{K}$. At the same time, the films are highly stable in the high-temperature methane / hydrogen atmosphere typically required to grow single wall carbon nanotubes. We characterize molybdenum rhenium alloy films deposited via simultaneous sputtering from two sources, with respect to their composition as function of sputter parameters and their electronic dc as well as GHz properties at low temperature. Specific emphasis is placed on the effect of the carbon nanotube growth conditions on the film. Superconducting coplanar waveguide resonators are defined lithographically; we demonstrate that the resonators remain functional when undergoing nanotube growth conditions, and characterize their properties as function of temperature. This paves the way for ultra-clean nanotube devices grown in situ onto superconducting coplanar waveguide circuit elements.
△ Less
Submitted 1 October, 2015;
originally announced October 2015.
-
Weak localization and Raman study of anisotropically etched graphene antidots
Authors:
Florian Oberhuber,
Stefan Blien,
Stefanie Heydrich,
Fatemeh Yaghobian,
Tobias Korn,
Christian Schüller,
Christoph Strunk,
Dieter Weiss,
Jonathan Eroms
Abstract:
We study a crystallographic etching process of graphene nanostructures where zigzag edges can be prepared selectively. The process involves heating exfoliated single-layer graphene samples with a predefined pattern of antidot arrays in an argon atmosphere at 820 C, which selectively removes carbon atoms located on armchair sites. Atomic force microscopy and scanning electron microscopy cannot reso…
▽ More
We study a crystallographic etching process of graphene nanostructures where zigzag edges can be prepared selectively. The process involves heating exfoliated single-layer graphene samples with a predefined pattern of antidot arrays in an argon atmosphere at 820 C, which selectively removes carbon atoms located on armchair sites. Atomic force microscopy and scanning electron microscopy cannot resolve the structure on the atomic scale. However, weak localization and Raman measurements - which both probe intervalley scattering at armchair edges - indicate that zigzag regions are enhanced compared to samples prepared with oxygen based reactive ion etching only.
△ Less
Submitted 9 October, 2013; v1 submitted 14 August, 2013;
originally announced August 2013.