-
Spatial map** and analysis of graphene nanomechanical resonator networks
Authors:
Brittany Carter,
Viva R. Horowitz,
Uriel Hernandez,
David J. Miller,
Andrew Blaikie,
Benjamín J. Alemán
Abstract:
Nanoelectromechanical (NEMS) resonator networks have drawn increasing interest due to their potential applications in emergent behavior, sensing, phononics, and mechanical information processing. A challenge toward realizing these large-scale networks is the ability to controllably tune and reconfigure the collective, macroscopic properties of the network, which relies directly on the development…
▽ More
Nanoelectromechanical (NEMS) resonator networks have drawn increasing interest due to their potential applications in emergent behavior, sensing, phononics, and mechanical information processing. A challenge toward realizing these large-scale networks is the ability to controllably tune and reconfigure the collective, macroscopic properties of the network, which relies directly on the development of methods to characterize the constituent NEMS resonator building blocks and their coupling. In this work, we demonstrate a scalable optical technique to spatially map graphene NEMS networks and read out the fixed-frequency collective response as a single vector. Using the response vectors, we introduce an efficient algebraic approach to quantify the site-specific elasticity, mass, dam**, and coupling parameters of network clusters. We apply this technique to accurately characterize single uncoupled resonators and coupled resonator pairs by sampling them at just two frequencies, and without the use of curve fitting or the associated a priori parameter estimates. Our technique may be applied to a range of classical and quantum resonator systems and fills in a vital gap for programming NEMS networks.
△ Less
Submitted 7 February, 2023;
originally announced February 2023.
-
Non-volatile rewritable frequency tuning of a nanoelectromechanical resonator using photoinduced do**
Authors:
David J. Miller,
Andrew Blaikie,
Benjamin J. Aleman
Abstract:
Tuning the frequency of a resonant element is of vital importance in both the macroscopic world, such as when tuning a musical instrument, as well as at the nanoscale. In particular, precisely controlling the resonance frequency of isolated nanoelectromechanical resonators (NEMS) has enabled innovations such as tunable mechanical filtering and mixing as well as commercial technologies such as robu…
▽ More
Tuning the frequency of a resonant element is of vital importance in both the macroscopic world, such as when tuning a musical instrument, as well as at the nanoscale. In particular, precisely controlling the resonance frequency of isolated nanoelectromechanical resonators (NEMS) has enabled innovations such as tunable mechanical filtering and mixing as well as commercial technologies such as robust timing oscillators. Much like their electronic device counterparts, the potential of NEMS grows when they are built up into large-scale arrays. Such arrays have enabled neutral-particle mass spectroscopy and have been proposed for ultralow-power alternatives to traditional analog electronics as well as nanomechanical information technologies like memory, logic, and computing. A fundamental challenge to these applications is to precisely tune the vibrational frequency and coupling of all resonators in the array, since traditional tuning methods, like patterned electrostatic gating or dielectric tuning, become intractable when devices are densely packed. Here, we demonstrate a persistent, rewritable, scalable, and high-speed frequency tuning method for graphene-based NEMS. Our method uses a focused laser and two shared electrical contacts to photodope individual resonators by simultaneously applying optical and electrostatic fields. After the fields are removed, the trapped charge created by this process persists and applies a local electrostatic tension to the resonators, tuning their frequencies. By providing a facile means to locally address the strain of a NEMS resonator, this approach lays the groundwork for fully programmable large-scale NEMS lattices and networks.
△ Less
Submitted 4 December, 2019; v1 submitted 20 August, 2019;
originally announced August 2019.
-
A fast, sensitive, room-temperature graphene nanomechanical bolometer
Authors:
Andrew Blaikie,
David Miller,
Benjamín J. Alemán
Abstract:
Bolometers are a powerful and vital means of detecting light in the IR to THz frequencies, and they have been adopted for a range of uses from astronomical observation to thermal imaging. As uses diversify, there is an increasing demand for faster, more sensitive room-temperature bolometers. To this end, graphene has generated interest because of its miniscule heat capacity and its intrinsic ultra…
▽ More
Bolometers are a powerful and vital means of detecting light in the IR to THz frequencies, and they have been adopted for a range of uses from astronomical observation to thermal imaging. As uses diversify, there is an increasing demand for faster, more sensitive room-temperature bolometers. To this end, graphene has generated interest because of its miniscule heat capacity and its intrinsic ultra-broadband absorption, properties that would allow it to quickly detect low levels of light of nearly any wavelength. Yet, graphene has disappointed its expectations in traditional electrical bolometry at room temperature, because of its weakly temperature-dependent resistivity and exceptionally high thermal conductivity. Here, we overcome these challenges with a new approach that detects light by tracking the resonance frequency of a graphene nanomechanical resonator. The absorbed light heats up and thermally tensions the resonator, thereby changing its frequency. Using this approach, we achieve a room-temperature noise-equivalent power of 7 pW/Hz^1/2, a value 100 times more sensitive than electrical graphene bolometers, and speeds (1.3 MHz) that greatly surpass state-of-the-art microbolometers.
△ Less
Submitted 31 October, 2018;
originally announced October 2018.
-
Synthesising Wider Field Images from Narrow-Field Retinal Video Acquired Using a Low-Cost Direct Ophthalmoscope (Arclight) Attached to a Smartphone
Authors:
Keylor Daniel Chaves Viquez,
Ognjen Arandjelovic,
Andrew Blaikie,
In Ae Hwang
Abstract:
Access to low cost retinal imaging devices in low and middle income countries is limited, compromising progress in preventing needless blindness. The Arclight is a recently developed low-cost solar powered direct ophthalmoscope which can be attached to the camera of a smartphone to acquire retinal images and video. However, the acquired data is inherently limited by the optics of direct ophthalmos…
▽ More
Access to low cost retinal imaging devices in low and middle income countries is limited, compromising progress in preventing needless blindness. The Arclight is a recently developed low-cost solar powered direct ophthalmoscope which can be attached to the camera of a smartphone to acquire retinal images and video. However, the acquired data is inherently limited by the optics of direct ophthalmoscopy, resulting in a narrow field of view with associated corneal reflections, limiting its usefulness. In this work we describe the first fully automatic method utilizing videos acquired using the Arclight attached to a mobile phone camera to create wider view, higher quality still images comparable with images obtained using much more expensive and bulky dedicated traditional retinal cameras.
△ Less
Submitted 26 August, 2017;
originally announced August 2017.
-
Simulating the Electroweak Phase Transition: Sonification of Bubble Nucleation
Authors:
R. Michael Winters,
Andrew Blaikie,
Deva O'Neil
Abstract:
As an applicaton of sonification, a simulation of the early universe was developed to portray a phase transition that occurred shortly after the Big Bang. The Standard Model of particle physics postulates that a hypothetical particle, the Higgs boson, is responsible for the breaking of the symmetry between the electromagnetic force and the weak force. This phase transition may have been responsibl…
▽ More
As an applicaton of sonification, a simulation of the early universe was developed to portray a phase transition that occurred shortly after the Big Bang. The Standard Model of particle physics postulates that a hypothetical particle, the Higgs boson, is responsible for the breaking of the symmetry between the electromagnetic force and the weak force. This phase transition may have been responsible for triggering Baryogenesis, the generation of an abundance of matter over anti-matter. This hypothesis is known as Electroweak Baryogenesis. In this simulation, aspects of bubble nucleation in Standard Model Electroweak Baryogenesis were examined and modeled using Mathematica, and sonified using SuperCollider3. The resulting simulation, which has been used for pedagogical purposes by one of the authors, suggests interesting possibilities for the integration of science and aesthetics as well as auditory perception. The sonification component in particular also had the unexpected benefit of being useful in debugging the Mathematica code.
△ Less
Submitted 3 June, 2011;
originally announced June 2011.
