-
Optimal Per-Antenna ADC Bit Allocation in Correlated and Cell-Free Massive MIMO
Authors:
Daniel Verenzuela,
Emil Björnson,
Michail Matthaiou
Abstract:
In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the…
▽ More
In Massive MIMO base stations (BSs), the hardware design needs to balance high spectral efficiency (SE) with low complexity. The level of hardware impairments (HWIs) indicates how strong the signal distortion introduced by hardware imperfections is. In particular, the analog-to-digital converters (ADCs) have an important impact on signal distortion and power consumption. This article addresses the fundamental problem of selecting the optimal hardware quality in the Massive MIMO space. In particular, we examine the optimal HWI and ADC bit allocation per BS antenna to maximize the SE. The results show that in co-located arrays with low channel gain variations across antennas, equal ADC bit allocation is optimal. In contrast, cell-free Massive MIMO systems benefit the most from optimizing the ADC bit allocation achieving improvements in the order of 2 [bit-per-channel-use] per user equipment when using regularized zero-forcing (RZF). In addition, when including the impact of power consumption in cell-free Massive MIMO with RZF, allocating low values of mixed ADC bit resolutions across the BS antennas can increase the energy efficiency up to 30% compared to equal ADC bit allocation.
△ Less
Submitted 19 April, 2021;
originally announced April 2021.
-
Cell-Free Massive MIMO with Large-Scale Fading Decoding and Dynamic Cooperation Clustering
Authors:
Özlem Tuğfe Demir,
Emil Björnson,
Luca Sanguinetti
Abstract:
This paper considers the uplink of user-centric cell-free massive MIMO (multiple-input multiple-output) systems. We utilize the user-centric dynamic cooperation clustering (DCC) framework and derive the achievable spectral efficiency with two-layer decoding that is divided between the access points and the central processing unit (CPU). This decoding method is also known as large-scale fading deco…
▽ More
This paper considers the uplink of user-centric cell-free massive MIMO (multiple-input multiple-output) systems. We utilize the user-centric dynamic cooperation clustering (DCC) framework and derive the achievable spectral efficiency with two-layer decoding that is divided between the access points and the central processing unit (CPU). This decoding method is also known as large-scale fading decoding (LSFD). The fronthaul signaling load is analyzed and a nearly optimal second-layer decoding scheme at the CPU is proposed to reduce the fronthaul requirements compared to the optimal scheme. We also revisit the joint optimization of LSFD weights and uplink power control and show that the corresponding max-min fair optimization problem can be solved optimally via an efficient fixed-point algorithm. We provide simulations that bring new insights into the cell-free massive MIMO implementation.
△ Less
Submitted 9 September, 2021; v1 submitted 16 April, 2021;
originally announced April 2021.
-
Joint Analog Beam Selection and Digital Beamforming in Millimeter Wave Cell-Free Massive MIMO Systems
Authors:
Cenk M. Yetis,
Emil Björnson,
Pontus Giselsson
Abstract:
Cell-free massive MIMO systems consist of many distributed access points with simple components that jointly serve the users. In millimeter wave bands, only a limited set of predetermined beams can be supported. In a network that consolidates these technologies, downlink analog beam selection stands as a challenging task for the network sum-rate maximization. Low-cost digital filters can improve t…
▽ More
Cell-free massive MIMO systems consist of many distributed access points with simple components that jointly serve the users. In millimeter wave bands, only a limited set of predetermined beams can be supported. In a network that consolidates these technologies, downlink analog beam selection stands as a challenging task for the network sum-rate maximization. Low-cost digital filters can improve the network sum-rate further. In this work, we propose low-cost joint designs of analog beam selection and digital filters. The proposed joint designs achieve significantly higher sum-rates than the disjoint design benchmark. Supervised machine learning (ML) algorithms can efficiently approximate the input-output map** functions of the beam selection decisions of the joint designs with low computational complexities. Since the training of ML algorithms is performed off-line, we propose a well-constructed joint design that combines multiple initializations, iterations, and selection features, as well as beam conflict control, i.e., the same beam cannot be used for multiple users. The numerical results indicate that ML algorithms can retain 99-100% of the original sum-rate results achieved by the proposed well-constructed designs.
△ Less
Submitted 2 July, 2021; v1 submitted 20 March, 2021;
originally announced March 2021.
-
RIS-Aided Wireless Communications: Prototy**, Adaptive Beamforming, and Indoor/Outdoor Field Trials
Authors:
Xilong Pei,
Haifan Yin,
Li Tan,
Lin Cao,
Zhanpeng Li,
Kai Wang,
Kun Zhang,
Emil Björnson
Abstract:
The prospects of using a Reconfigurable Intelligent Surface (RIS) to aid wireless communication systems have recently received much attention from academia and industry. Most papers make theoretical studies based on elementary models, while the prototy** of RIS-aided wireless communication and real-world field trials are scarce. In this paper, we describe a new RIS prototype consisting of 1100 c…
▽ More
The prospects of using a Reconfigurable Intelligent Surface (RIS) to aid wireless communication systems have recently received much attention from academia and industry. Most papers make theoretical studies based on elementary models, while the prototy** of RIS-aided wireless communication and real-world field trials are scarce. In this paper, we describe a new RIS prototype consisting of 1100 controllable elements working at 5.8 GHz band. We propose an efficient algorithm for configuring the RIS over the air by exploiting the geometrical array properties and a practical receiver-RIS feedback link. In our indoor test, where the transmitter and receiver are separated by a 30 cm thick concrete wall, our RIS prototype provides a 26 dB power gain compared to the baseline case where the RIS is replaced by a copper plate. A 27 dB power gain was observed in the short-distance outdoor measurement. We also carried out long-distance measurements and successfully transmitted a 32 Mbps data stream over 500 m. A 1080p video was live-streamed and it only played smoothly when the RIS was utilized. The power consumption of the RIS is around 1 W. Our paper is vivid proof that the RIS is a very promising technology for future wireless communications.
△ Less
Submitted 31 July, 2021; v1 submitted 28 February, 2021;
originally announced March 2021.
-
Reconfigurable Intelligent Surfaces: A Signal Processing Perspective With Wireless Applications
Authors:
Emil Björnson,
Henk Wymeersch,
Bho Matthiesen,
Petar Popovski,
Luca Sanguinetti,
Elisabeth de Carvalho
Abstract:
Antenna array technology enables directional transmission and reception of wireless signals, for communications, localization, and sensing purposes. The signal processing algorithms that underpin this technology began to be developed several decades ago [1], but it is first with the ongoing deployment of the fifth-generation (5G) wireless mobile networks that it becomes a mainstream technology [2]…
▽ More
Antenna array technology enables directional transmission and reception of wireless signals, for communications, localization, and sensing purposes. The signal processing algorithms that underpin this technology began to be developed several decades ago [1], but it is first with the ongoing deployment of the fifth-generation (5G) wireless mobile networks that it becomes a mainstream technology [2]. The number of antenna elements in the arrays of the 5G base stations and user devices can be measured at the order of 100 and 10, respectively. As the networks shift towards using higher frequency bands, more antennas fit into a given aperture.
The 5G developments enhance the transmitter and receiver functionalities, but the wireless channel propagation remains an uncontrollable system. This is illustrated in Fig. 1(a) and its mathematical notation will be introduced later. Transmitted signals with three different frequencies are shown to illustrate the fact that attenuation can vary greatly across frequencies. Looking beyond 5G, the advent of electromagnetic components that can shape how they interact with wireless signals enables partial control of the propagation. A reconfigurable intelligent surface (RIS) is a two-dimensional surface of engineered material whose properties are reconfigurable rather than static [4].
This article provides a tutorial on the fundamental properties of the RIS technology from a signal processing perspective. It is meant as a complement to recent surveys of electromagnetic and hardware aspects [4], [7], [11], acoustics [12], communication theory [13], and localization [8]. We will provide the formulas and derivations that are required to understand and analyze RIS-aided systems using signal processing, and exemplify how they can be utilized for improved communication, localization, and sensing.
△ Less
Submitted 31 December, 2021; v1 submitted 1 February, 2021;
originally announced February 2021.
-
MMSE-Optimal Sequential Processing for Cell-Free Massive MIMO With Radio Stripes
Authors:
Zakir Hussain Shaik,
Emil Björnson,
Erik G. Larsson
Abstract:
Cell-free massive multiple-input-multiple-output (mMIMO) is an emerging technology for beyond 5G with its promising features such as higher spectral efficiency and superior spatial diversity as compared to conventional multiple-input-multiple-output (MIMO) technology. The main working principle of cell-free mMIMO is that many distributed access points (APs) cooperate simultaneously to serve all th…
▽ More
Cell-free massive multiple-input-multiple-output (mMIMO) is an emerging technology for beyond 5G with its promising features such as higher spectral efficiency and superior spatial diversity as compared to conventional multiple-input-multiple-output (MIMO) technology. The main working principle of cell-free mMIMO is that many distributed access points (APs) cooperate simultaneously to serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture with a sequential fronthaul between the APs. A novel uplink sequential processing algorithm is developed which is proved to be optimal in both the maximum spectral efficiency (SE) and the minimum mean square error (MSE) sense. A detailed quantitative analysis of the fronthaul requirement or signaling of the proposed algorithm and its comparison with competing sub-optimal algorithms is provided. Key conclusions and implications are summarized in the form of corollaries. Based on the analytical and numerical simulation results, we conclude that the proposed scheme can greatly reduce the fronthaul signaling, without compromising the communication performance.
△ Less
Submitted 27 December, 2020;
originally announced December 2020.
-
Near- and Far-Field Communications with Large Intelligent Surfaces
Authors:
Andrea de Jesus Torres,
Luca Sanguinetti,
Emil Björnson
Abstract:
This paper studies the uplink spectral efficiency (SE) achieved by two single-antenna user equipments (UEs) communicating with a Large Intelligent Surface (LIS), defined as a planar array consisting of $N$ antennas that each has area $A$. The analysis is carried out with a deterministic line-of-sight propagation channel model that captures key fundamental aspects of the so-called geometric near-fi…
▽ More
This paper studies the uplink spectral efficiency (SE) achieved by two single-antenna user equipments (UEs) communicating with a Large Intelligent Surface (LIS), defined as a planar array consisting of $N$ antennas that each has area $A$. The analysis is carried out with a deterministic line-of-sight propagation channel model that captures key fundamental aspects of the so-called geometric near-field of the array. Maximum ratio (MR) and minimum mean squared error (MMSE) combining schemes are considered. With both schemes, the signal and interference terms are numerically analyzed as a function of the position of the transmitting devices when the width/height $L = \sqrt{NA}$ of the square-shaped array grows large. The results show that an exact near-field channel model is needed to evaluate the SE whenever the distance of transmitting UEs is comparable with the LIS' dimensions. It is shown that, if $L$ grows, the UEs are eventually in the geometric near-field and the interference does not vanish. MMSE outperforms MR for an LIS of practically large size.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Max-Min Power Control in Downlink Massive MIMO with Distributed Antenna Arrays
Authors:
Noman Akbar,
Emil Bjornson,
Nan Yang,
Erik G. Larsson
Abstract:
In this paper, we investigate optimal downlink power allocation in massive multiple-input multiple-output (MIMO) networks with distributed antenna arrays (DAAs) under correlated and uncorrelated channel fading. In DAA massive MIMO, the base station (BS) consists of multiple antenna sub-arrays. Notably, the antenna sub-arrays are deployed in arbitrary locations within a DAA massive MIMO cell. Conse…
▽ More
In this paper, we investigate optimal downlink power allocation in massive multiple-input multiple-output (MIMO) networks with distributed antenna arrays (DAAs) under correlated and uncorrelated channel fading. In DAA massive MIMO, the base station (BS) consists of multiple antenna sub-arrays. Notably, the antenna sub-arrays are deployed in arbitrary locations within a DAA massive MIMO cell. Consequently, the distance-dependent large-scale propagation coefficients are different from a user to these different antenna sub-arrays, which makes power control a challenging problem. We assume that the network operates in time-division duplex mode, where each BS obtains the channel estimates via uplink pilots. Based on the channel estimates, the BSs perform maximum-ratio transmission in the downlink. We then derive a closed-form signal-to-interference-plus-noise ratio (SINR) expression, where the channels are subject to correlated fading. Based on the SINR expression, we propose a networkwide max-min power control algorithm to ensure that each user in the network receives a uniform quality of service. Numerical results demonstrate the performance advantages offered by DAA massive MIMO. For some specific scenarios, DAA massive MIMO can improve the average per-user throughput up to 55%. Furthermore, we demonstrate that channel fading covariance is an important factor in determining the performance of DAA massive MIMO.
△ Less
Submitted 25 October, 2020; v1 submitted 18 October, 2020;
originally announced October 2020.
-
Deep Learning-based Phase Reconfiguration for Intelligent Reflecting Surfaces
Authors:
Özgecan Özdogan,
Emil Björnson
Abstract:
Intelligent reflecting surfaces (IRSs), consisting of reconfigurable metamaterials, have recently attracted attention as a promising cost-effective technology that can bring new features to wireless communications. These surfaces can be used to partially control the propagation environment and can potentially provide a power gain that is proportional to the square of the number of IRS elements whe…
▽ More
Intelligent reflecting surfaces (IRSs), consisting of reconfigurable metamaterials, have recently attracted attention as a promising cost-effective technology that can bring new features to wireless communications. These surfaces can be used to partially control the propagation environment and can potentially provide a power gain that is proportional to the square of the number of IRS elements when configured in a proper way. However, the configuration of the local phase matrix at the IRSs can be quite a challenging task since they are purposely designed to not have any active components, therefore, they are not able to process any pilot signal. In addition, a large number of elements at the IRS may create a huge training overhead. In this paper, we present a deep learning (DL) approach for phase reconfiguration at an IRS in order to learn and make use of the local propagation environment. The proposed method uses the received pilot signals reflected through the IRS to train the deep feedforward network. The performance of the proposed approach is evaluated and the numerical results are presented.
△ Less
Submitted 29 September, 2020;
originally announced September 2020.
-
Rayleigh Fading Modeling and Channel Hardening for Reconfigurable Intelligent Surfaces
Authors:
Emil Björnson,
Luca Sanguinetti
Abstract:
A realistic performance assessment of any wireless technology requires the use of a channel model that reflects its main characteristics. The independent and identically distributed Rayleigh fading channel model has been (and still is) the basis of most theoretical research on multiple antenna technologies in scattering environments. This letter shows that such a model is not physically appearing…
▽ More
A realistic performance assessment of any wireless technology requires the use of a channel model that reflects its main characteristics. The independent and identically distributed Rayleigh fading channel model has been (and still is) the basis of most theoretical research on multiple antenna technologies in scattering environments. This letter shows that such a model is not physically appearing when using a reconfigurable intelligent surface (RIS) with rectangular geometry and provides an alternative physically feasible Rayleigh fading model that can be used as a baseline when evaluating RIS-aided communications. The model is used to revisit the basic RIS properties, e.g., the rank of spatial correlation matrices and channel hardening.
△ Less
Submitted 2 January, 2021; v1 submitted 10 September, 2020;
originally announced September 2020.
-
Cell-Free Massive MIMO with Channel Aging and Pilot Contamination
Authors:
Jiakang Zheng,
Jiayi Zhang,
Emil Björnson,
Bo Ai
Abstract:
In this paper, we investigate the impact of channel aging on the performance of cell-free (CF) massive multiple-input multiple-output (MIMO) systems with pilot contamination. To take into account the channel aging effect due to user mobility, we first compute a channel estimate. We use it to derive novel closed-form expressions for the uplink spectral efficiency (SE) of CF massive MIMO systems wit…
▽ More
In this paper, we investigate the impact of channel aging on the performance of cell-free (CF) massive multiple-input multiple-output (MIMO) systems with pilot contamination. To take into account the channel aging effect due to user mobility, we first compute a channel estimate. We use it to derive novel closed-form expressions for the uplink spectral efficiency (SE) of CF massive MIMO systems with large-scale fading decoding and matched-filter receiver cooperation. The performance of a small-cell system is derived for comparison. It is found that CF massive MIMO systems achieve higher 95\%-likely uplink SE in both low- and high-mobility conditions, and CF massive MIMO is more robust to channel aging. Fractional power control (FPC) is considered to compensate to limit the inter-user interference. The results show that, compared with full power transmission, the benefits of FPC are gradually weakened as the channel aging grows stronger.
△ Less
Submitted 25 August, 2020;
originally announced August 2020.
-
Scoring the Terabit/s Goal:Broadband Connectivity in 6G
Authors:
Nandana Rajatheva,
Italo Atzeni,
Simon Bicais,
Emil Bjornson,
Andre Bourdoux,
Stefano Buzzi,
Carmen D'Andrea,
Jean-Baptiste Dore,
Serhat Erkucuk,
Manuel Fuentes,
Ke Guan,
Yuzhou Hu,
Xiao**g Huang,
Jari Hulkkonen,
Josep Miquel Jornet,
Marcos Katz,
Behrooz Makki,
Rickard Nilsson,
Erdal Panayirci,
Khaled Rabie,
Nuwanthika Rajapaksha,
MohammadJavad Salehi,
Hadi Sarieddeen,
Shahriar Shahabuddin,
Tommy Svensson
, et al. (4 additional authors not shown)
Abstract:
This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we conside…
▽ More
This paper explores the road to vastly improving the broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, with peak data rates up to 1 Tbps. Several categories of enablers at the infrastructure, spectrum, and protocol/algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be mainly used for pushing the peak rates of point-to-point links. Finally, at the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latency, higher reliability, and reduced complexity.
△ Less
Submitted 21 February, 2021; v1 submitted 17 August, 2020;
originally announced August 2020.
-
Frequency-Mixing Intelligent Reflecting Surfaces for Nonlinear Wireless Propagation
Authors:
Jide Yuan,
Elisabeth De Carvalho,
Robin Jess Williams,
Emil Björnson,
Petar Popovski
Abstract:
We introduce the concept of frequency-mixing intelligent reflecting surface (FMx-IRS), where the elements of the surface continuously change the phases of the incident signals. In this way, the FMx-IRS acts as a frequency mixer and makes the propagation environment nonlinear, thereby introducing new frequencies. We study the basic features of the proposed concept and demonstrate its advantages tha…
▽ More
We introduce the concept of frequency-mixing intelligent reflecting surface (FMx-IRS), where the elements of the surface continuously change the phases of the incident signals. In this way, the FMx-IRS acts as a frequency mixer and makes the propagation environment nonlinear, thereby introducing new frequencies. We study the basic features of the proposed concept and demonstrate its advantages that stem from the novel type of control over the wireless propagation. The channel decoupling feature and the correlation between reflected channels are elaborated for the architecture, and are validated by the simulations.
△ Less
Submitted 16 December, 2020; v1 submitted 2 July, 2020;
originally announced July 2020.
-
Large-Scale Fading Precoding for Spatially Correlated Rician Fading with Phase Shifts
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
We consider large-scale fading precoding (LSFP), which is a two-layer precoding scheme in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems to suppress inter-cell interference. We obtain the closed-form spectral efficiency (SE) with LSFP at the central network controller and maximum ratio precoding at the base stations (BSs) using the linear minimum mean-squared erro…
▽ More
We consider large-scale fading precoding (LSFP), which is a two-layer precoding scheme in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems to suppress inter-cell interference. We obtain the closed-form spectral efficiency (SE) with LSFP at the central network controller and maximum ratio precoding at the base stations (BSs) using the linear minimum mean-squared error or least squares channel estimators. The LSFP weights are designed based on the long-term channel statistics and two important performance metrics are optimized under the per-BS transmit power constraints. These metrics are sum SE and proportional fairness, where the resulting optimization problems are non-convex. Two efficient algorithms are developed to solve these problems by using the weighted minimum mean-squared error and the alternating direction method of multipliers methods. Moreover, two partial LSFP schemes are proposed to reduce the fronthaul signaling requirements. Simulations quantify the performance improvement of LSFP over standard single-layer precoding schemes and identify the specific advantage of each optimization problem.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.
-
Structured Massive Access for Scalable Cell-Free Massive MIMO Systems
Authors:
Shuaifei Chen,
Jiayi Zhang,
Emil Björnson,
**g Zhang,
Bo Ai
Abstract:
How to meet the demand for increasing number of users, higher data rates, and stringent quality-of-service (QoS) in the beyond fifth-generation (B5G) networks? Cell-free massive multiple-input multiple-output (MIMO) is considered as a promising solution, in which many wireless access points cooperate to jointly serve the users by exploiting coherent signal processing. However, there are still many…
▽ More
How to meet the demand for increasing number of users, higher data rates, and stringent quality-of-service (QoS) in the beyond fifth-generation (B5G) networks? Cell-free massive multiple-input multiple-output (MIMO) is considered as a promising solution, in which many wireless access points cooperate to jointly serve the users by exploiting coherent signal processing. However, there are still many unsolved practical issues in cell-free massive MIMO systems, whereof scalable massive access implementation is one of the most vital. In this paper, we propose a new framework for structured massive access in cell-free massive MIMO systems, which comprises one initial access algorithm, a partial large-scale fading decoding (P-LSFD) strategy, two pilot assignment schemes, and one fractional power control policy. New closed-form spectral efficiency (SE) expressions with maximum ratio (MR) combining are derived. The simulation results show that our proposed framework provides high SE when using local partial minimum mean-square error (LP-MMSE) and MR combining. Specifically, the proposed initial access algorithm and pilot assignment schemes outperform their corresponding benchmarks, P-LSFD achieves scalability with a negligible performance loss compared to the conventional optimal large-scale fading decoding (LSFD), and scalable fractional power control provides a controllable trade-off between user fairness and the average SE.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Uplink Power Control in Cellular Massive MIMO Systems: Co** With the Congestion Issue
Authors:
Trinh Van Chien,
Emil Björnson,
Hien Quoc Ngo
Abstract:
One main goal of 5G-and-beyond systems is to simultaneously serve many users, each having a requested spectral efficiency (SE), in an energy-efficient way. The network capacity cannot always satisfy all the SE requirements, for example, when some users have bad channel conditions, especially happening in a cellular topology, and therefore congestion can happen. By considering both the pilot and da…
▽ More
One main goal of 5G-and-beyond systems is to simultaneously serve many users, each having a requested spectral efficiency (SE), in an energy-efficient way. The network capacity cannot always satisfy all the SE requirements, for example, when some users have bad channel conditions, especially happening in a cellular topology, and therefore congestion can happen. By considering both the pilot and data powers in the uplink transmission as optimization variables, this paper formulates and solves an energy-efficiency problem for cellular Massive MIMO (Multiple Input Multiple Output) systems that can handle the congestion issue. New algorithms based on the alternating optimization approach are proposed to obtain a fixed-point solution. Numerical results manifest that the proposed algorithms can provide the demanded SEs to many users even when the congestion happens.
△ Less
Submitted 13 June, 2020;
originally announced June 2020.
-
Intelligent Reflecting Surface Operation under Predictable Receiver Mobility: A Continuous Time Propagation Model
Authors:
Bho Matthiesen,
Emil Björnson,
Elisabeth De Carvalho,
Petar Popovski
Abstract:
The operation of an intelligent reflecting surface (IRS) under predictable receiver mobility is investigated. We develop a continuous time system model for multipath channels and discuss the optimal IRS configuration with respect to received power, Doppler spread, and delay spread. It is shown that the received power can be maximized without adding Doppler spread to the system. In a numerical case…
▽ More
The operation of an intelligent reflecting surface (IRS) under predictable receiver mobility is investigated. We develop a continuous time system model for multipath channels and discuss the optimal IRS configuration with respect to received power, Doppler spread, and delay spread. It is shown that the received power can be maximized without adding Doppler spread to the system. In a numerical case study, we show that an IRS having the size of just two large billboards can improve the link budget of ground to Low Earth Orbit (LEO) satellite links by up to 6 dB. It also adds a second, almost equivalently strong, communication path that improves the link reliability.
△ Less
Submitted 21 August, 2020; v1 submitted 12 June, 2020;
originally announced June 2020.
-
Reconfigurable Intelligent Surfaces: Three Myths and Two Critical Questions
Authors:
Emil Björnson,
Özgecan Özdogan,
Erik G. Larsson
Abstract:
The search for physical-layer technologies that can play a key role in beyond-5G systems has started. One option is reconfigurable intelligent surfaces (RIS), which can collect wireless signals from a transmitter and passively beamform them towards the receiver. The technology has exciting prospects and is quickly gaining traction in the communication community, but in the current hype we have wit…
▽ More
The search for physical-layer technologies that can play a key role in beyond-5G systems has started. One option is reconfigurable intelligent surfaces (RIS), which can collect wireless signals from a transmitter and passively beamform them towards the receiver. The technology has exciting prospects and is quickly gaining traction in the communication community, but in the current hype we have witnessed how several myths and overstatements are spreading in the literature. In this article, we take a neutral look at the RIS technology. We first review the fundamentals and then explain specific features that can be easily misinterpreted. In particular, we debunk three myths: 1) Current network technology can only control the transmitter and receiver, not the environment in between; 2) A better asymptotic array gain is achieved than with conventional beamforming; 3) The pathloss is the same as with anomalous mirrors. To inspire further research, we conclude by identifying two critical questions that must be answered for RIS to become a successful technology: 1) What is a convincing use case for RIS?; 2) How can we estimate channels and control an RIS in real time?
△ Less
Submitted 1 October, 2020; v1 submitted 5 June, 2020;
originally announced June 2020.
-
The Bussgang Decomposition of Non-Linear Systems: Basic Theory and MIMO Extensions
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
Many of the systems that appear in various signal processing applications are non-linear, for example, due to hardware impairments such as non-linear amplifiers and finite-resolution quantization. The Bussgang decomposition is a popular tool for analyzing the performance of systems that involve such non-linear components. In a nutshell, the decomposition provides an exact probabilistic relationshi…
▽ More
Many of the systems that appear in various signal processing applications are non-linear, for example, due to hardware impairments such as non-linear amplifiers and finite-resolution quantization. The Bussgang decomposition is a popular tool for analyzing the performance of systems that involve such non-linear components. In a nutshell, the decomposition provides an exact probabilistic relationship between the output and the input of a non-linearity: the output is equal to a scaled version of the input plus uncorrelated distortion. The decomposition can either be used to compute exact performance results or lower bounds where the uncorrelated distortion is treated as independent noise. This lecture note explains the basic theory, provides key examples, extends the theory to complex-valued vector signals, and clarifies some potential misconceptions.
△ Less
Submitted 4 May, 2020;
originally announced May 2020.
-
White Paper on Broadband Connectivity in 6G
Authors:
Nandana Rajatheva,
Italo Atzeni,
Emil Bjornson,
Andre Bourdoux,
Stefano Buzzi,
Jean-Baptiste Dore,
Serhat Erkucuk,
Manuel Fuentes,
Ke Guan,
Yuzhou Hu,
Xiao**g Huang,
Jari Hulkkonen,
Josep Miquel Jornet,
Marcos Katz,
Rickard Nilsson,
Erdal Panayirci,
Khaled Rabie,
Nuwanthika Rajapaksha,
MohammadJavad Salehi,
Hadi Sarieddeen,
Tommy Svensson,
Oskari Tervo,
Antti Tolli,
Qingqing Wu,
Wen Xu
Abstract:
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks wil…
▽ More
This white paper explores the road to implementing broadband connectivity in future 6G wireless systems. Different categories of use cases are considered, from extreme capacity with peak data rates up to 1 Tbps, to raising the typical data rates by orders-of-magnitude, to support broadband connectivity at railway speeds up to 1000 km/h. To achieve these goals, not only the terrestrial networks will be evolved but they will also be integrated with satellite networks, all facilitating autonomous systems and various interconnected structures. We believe that several categories of enablers at the infrastructure, spectrum, and protocol/ algorithmic levels are required to realize the intended broadband connectivity goals in 6G. At the infrastructure level, we consider ultra-massive MIMO technology (possibly implemented using holographic radio), intelligent reflecting surfaces, user-centric and scalable cell-free networking, integrated access and backhaul, and integrated space and terrestrial networks. At the spectrum level, the network must seamlessly utilize sub-6 GHz bands for coverage and spatial multiplexing of many devices, while higher bands will be used for pushing the peak rates of point-to-point links. The latter path will lead to THz communications complemented by visible light communications in specific scenarios. At the protocol/algorithmic level, the enablers include improved coding, modulation, and waveforms to achieve lower latencies, higher reliability, and reduced complexity. Different options will be needed to optimally support different use cases. The resource efficiency can be further improved by using various combinations of full-duplex radios, interference management based on rate-splitting, machine-learning-based optimization, coded caching, and broadcasting.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
Cell-Free Massive MIMO With Radio Stripes and Sequential Uplink Processing
Authors:
Zakir Hussain Shaik,
Emil Björnson,
Erik G. Larsson
Abstract:
Cell-free Massive MIMO (mMIMO) is envisaged to be a next-generation technology beyond 5G with its high spectral efficiency and superior spatial diversity as compared to that of conventional MIMO technology. The main principle is that many distributed access points (APs) cooperate to simultaneously serve all the users within the network without creating cell boundaries. This paper considers the upl…
▽ More
Cell-free Massive MIMO (mMIMO) is envisaged to be a next-generation technology beyond 5G with its high spectral efficiency and superior spatial diversity as compared to that of conventional MIMO technology. The main principle is that many distributed access points (APs) cooperate to simultaneously serve all the users within the network without creating cell boundaries. This paper considers the uplink of a cell-free mMIMO system utilizing the radio stripe network architecture. We propose a novel sequential processing algorithm with normalized linear minimum mean square error (N-LMMSE) combining at every. This algorithm enables interference suppression in cell-free MMO while kee** the cost and front-haul requirements low. The spectral efficiency of the proposed algorithm is computed and analyzed. We conclude that it provides an attractive trade-off between low front-haul requirements and high spectral efficiency.
△ Less
Submitted 5 March, 2020;
originally announced March 2020.
-
Code-domain NOMA in Massive MIMO: When is it Needed?
Authors:
Mai T. P. Le,
Luca Sanguinetti,
Emil Björnson,
Maria-Gabriella Di Benedetto
Abstract:
In overloaded Massive MIMO (mMIMO) systems, wherein the number $K$ of user equipments (UEs) exceeds the number of base station antennas $M$, it has recently been shown that non-orthogonal multiple access (NOMA) can increase the sum spectral efficiency. This paper aims at identifying cases where code-domain NOMA can improve the spectral efficiency of mMIMO in the classical regime where $K < M$. Nov…
▽ More
In overloaded Massive MIMO (mMIMO) systems, wherein the number $K$ of user equipments (UEs) exceeds the number of base station antennas $M$, it has recently been shown that non-orthogonal multiple access (NOMA) can increase the sum spectral efficiency. This paper aims at identifying cases where code-domain NOMA can improve the spectral efficiency of mMIMO in the classical regime where $K < M$. Novel spectral efficiency expressions are provided for the uplink and downlink with arbitrary spreading signatures and spatial correlation matrices. Particular attention is devoted to the planar arrays that are currently being deployed in pre-5G and 5G networks (in sub$-6$ GHz bands), which are characterized by limited spatial resolution. Numerical results show that mMIMO with such planar arrays can benefit from NOMA in scenarios where the UEs are spatially close to each other. A two-step UE grou** scheme is proposed for NOMA-aided mMIMO systems that is applicable to the spatial correlation matrices of the UEs that are currently active in each cell. Numerical results are used to investigate the performance of the algorithm under different operating conditions and types of spreading signatures (orthogonal, sparse and random sets). The analysis reveals that orthogonal signatures provide the highest average spectral efficiency.
△ Less
Submitted 3 April, 2021; v1 submitted 2 March, 2020;
originally announced March 2020.
-
Jamming-Robust Uplink Transmission for Spatially Correlated Massive MIMO Systems
Authors:
Hossein Akhlaghpasand,
Emil Björnson,
S. Mohammad Razavizadeh
Abstract:
In this paper, we consider how the uplink transmission of a spatially correlated massive multiple-input multiple-output (MIMO) system can be protected from a jamming attack. To suppress the jamming, we propose a novel framework including a new optimal linear estimator in the training phase and a bilinear equalizer in the data phase. The proposed estimator is optimal in the sense of maximizing the…
▽ More
In this paper, we consider how the uplink transmission of a spatially correlated massive multiple-input multiple-output (MIMO) system can be protected from a jamming attack. To suppress the jamming, we propose a novel framework including a new optimal linear estimator in the training phase and a bilinear equalizer in the data phase. The proposed estimator is optimal in the sense of maximizing the spectral efficiency of the legitimate system attacked by a jammer, and its implementation needs statistical knowledge about the jammer's channel. We derive an efficient algorithm to estimate the jamming information needed for the implementation of the proposed framework. Furthermore, we demonstrate that optimized power allocation at the legitimate users can improve the performance of the proposed framework regardless of the jamming power optimization. Our proposed framework can be exploited to combat jamming in scenarios with either ideal or non-ideal hardware at the legitimate users and the jammer. Numerical results reveal that using the proposed framework, the jammer cannot dramatically affect the performance of the legitimate system.
△ Less
Submitted 28 February, 2020;
originally announced February 2020.
-
Joint Power Control and LSFD for Wireless-Powered Cell-Free Massive MIMO
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
This paper considers wireless uplink information and downlink power transfer in cell-free massive multiple-input multiple-output systems. The single-antenna user equipments (UEs) utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the multiple-antenna access points (APs). We consider Rician fading and maximum ratio processing based on either linear mini…
▽ More
This paper considers wireless uplink information and downlink power transfer in cell-free massive multiple-input multiple-output systems. The single-antenna user equipments (UEs) utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the multiple-antenna access points (APs). We consider Rician fading and maximum ratio processing based on either linear minimum mean-squared error (LMMSE) or least-squares (LS) channel estimation. We derive the average harvested energy by using a practical non-linear energy harvesting circuit model for both coherent and non-coherent transmission schemes. Furthermore, the uplink spectral efficiency (SE) is derived for all the considered methods and the max-min fairness problem is cast where the optimization variables are the AP and UE power control coefficients together with the large-scale fading decoding vectors. The objective is to maximize the minimum SE of the UEs' under APs' and UEs' transmission power constraints. A novel alternating optimization algorithm with guaranteed convergence and improvement at each step is proposed to solve the highly-coupled non-convex problem.
△ Less
Submitted 12 November, 2020; v1 submitted 19 February, 2020;
originally announced February 2020.
-
Performance Analysis of Quantized Uplink Massive MIMO-OFDM With Oversampling Under Adjacent Channel Interference
Authors:
Ali Bulut Üçüncü,
Emil Björnson,
Håkan Johansson,
Erik G. Larsson,
Ali Özgür Yılmaz
Abstract:
Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. Howev…
▽ More
Massive multiple-input multiple-output (MIMO) systems have attracted much attention lately due to the many advantages they provide over single-antenna systems. Owing to the many antennas, low-cost implementation and low power consumption per antenna are desired. To that end, massive MIMO structures with low-resolution analog-to-digital converters (ADC) have been investigated in many studies. However, the effect of a strong interferer in the adjacent band on quantized massive MIMO systems have not been examined yet. In this study, we analyze the performance of uplink massive MIMO with low-resolution ADCs under frequency selective fading with orthogonal frequency division multiplexing in the perfect and imperfect receiver channel state information cases. We derive analytical expressions for the bit error rate and ergodic capacity. We show that the interfering band can be suppressed by increasing the number of antennas or the oversampling rate when a zero-forcing receiver is employed.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Power Scaling Laws and Near-Field Behaviors of Massive MIMO and Intelligent Reflecting Surfaces
Authors:
Emil Björnson,
Luca Sanguinetti
Abstract:
The use of large arrays might be the solution to the capacity problems in wireless communications. The signal-to-noise ratio (SNR) grows linearly with the number of array elements $N$ when using Massive MIMO receivers and half-duplex relays. Moreover, intelligent reflecting surfaces (IRSs) have recently attracted attention since these can relay signals to achieve an SNR that grows as $N^2$, which…
▽ More
The use of large arrays might be the solution to the capacity problems in wireless communications. The signal-to-noise ratio (SNR) grows linearly with the number of array elements $N$ when using Massive MIMO receivers and half-duplex relays. Moreover, intelligent reflecting surfaces (IRSs) have recently attracted attention since these can relay signals to achieve an SNR that grows as $N^2$, which seems like a major benefit. In this paper, we use a deterministic propagation model for a planar array of arbitrary size, to demonstrate that the mentioned SNR behaviors, and associated power scaling laws, only apply in the far-field. They cannot be used to study the regime where $N\to\infty$. We derive an exact channel gain expression that captures three essential near-field behaviors and use it to revisit the power scaling laws. We derive new finite asymptotic SNR limits but also conclude that these are unlikely to be approached in practice. We further prove that an IRS-aided setup cannot achieve a higher SNR than an equal-sized Massive MIMO setup, despite its faster SNR growth. We quantify analytically how much larger the IRS must be to achieve the same SNR. Finally, we show that an optimized IRS does not behave as an "anomalous" mirror but can vastly outperform that benchmark.
△ Less
Submitted 21 February, 2023; v1 submitted 12 February, 2020;
originally announced February 2020.
-
Using Intelligent Reflecting Surfaces for Rank Improvement in MIMO Communications
Authors:
Özgecan Özdogan,
Emil Björnson,
Erik G. Larsson
Abstract:
An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a…
▽ More
An intelligent reflecting surface (IRS), consisting of reconfigurable metamaterials, can be used to partially control the radio environment and thereby bring new features to wireless communications. Previous works on IRS have particularly studied the range extension use case and under what circumstances the new technology can beat relays. In this paper, we study another use case that might have a larger impact on the channel capacity: rank improvement. One of the classical bottlenecks of point-to-point MIMO communications is that the capacity gains provided by spatial multiplexing are only large at high SNR, and high SNR channels are mainly appearing in line-of-sight (LoS) scenarios where the channel matrix has low rank and therefore does not support spatial multiplexing. We demonstrate how an IRS can be used and optimized in such scenarios to increase the rank of the channel matrix, leading to substantial capacity gains.
△ Less
Submitted 6 February, 2020;
originally announced February 2020.
-
ADMM-Based One-Bit Quantized Signal Detection for Massive MIMO Systems with Hardware Impairments
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based linear receivers by generalizing them for the considered hardware impairment model. We propose an optimization problem to estimate the uplink data signals by ch…
▽ More
This paper considers signal detection in massive multiple-input multiple-output (MIMO) systems with general additive hardware impairments and one-bit quantization. First, we present the quantization-unaware and Bussgang decomposition-based linear receivers by generalizing them for the considered hardware impairment model. We propose an optimization problem to estimate the uplink data signals by choosing a suitable cost function that treats the unquantized received signal at the base station as the variable. We exploit the additional structure of the one-bit quantization and signal modulation by including proper constraints. To solve the non-convex quadratically-constrained quadratic programming (QCQP) problem, we propose an ADMM-based algorithm with closed-form update equations. Then, we replace the harsh projectors in the updates with their soft versions to improve the detection performance. We show that the proposed ADMM-based algorithm outperforms the state-of-the-art linear receivers significantly in terms of bit error rate (BER) and the performance gain increases with the number of antennas and users.
△ Less
Submitted 5 February, 2020;
originally announced February 2020.
-
Joint Power Allocation and Load Balancing Optimization for Energy-Efficient Cell-Free Massive MIMO Networks
Authors:
Trinh Van Chien,
Emil Björnson,
Erik G. Larsson
Abstract:
Large-scale distributed antenna systems with many access points (APs) that serve the users by coherent joint transmission is being considered for 5G-and-beyond networks. The technology is called Cell-free Massive MIMO and can provide a more uniform service level to the users than a conventional cellular topology. For a given user set, only a subset of the APs is likely needed to satisfy the users'…
▽ More
Large-scale distributed antenna systems with many access points (APs) that serve the users by coherent joint transmission is being considered for 5G-and-beyond networks. The technology is called Cell-free Massive MIMO and can provide a more uniform service level to the users than a conventional cellular topology. For a given user set, only a subset of the APs is likely needed to satisfy the users' performance demands, particularly outside the peak traffic hours. To find achieve an energy-efficient load balancing, we minimize the total downlink power consumption at the APs, considering both the transmit powers and hardware dissipation. APs can be temporarily turned off to reduce the latter part. The formulated optimization problem is non-convex but, nevertheless, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. Since the computational complexity is prohibitive for real-time implementation, we also propose two low-complexity algorithms that exploit the inherent group-sparsity and the optimized transmit powers in the problem formulation. Numerical results manifest that our optimization algorithms can greatly reduce the power consumption compared to kee** all APs turned on and only minimizing the transmit powers. Moreover, the low-complexity algorithms can effectively handle the power allocation and AP activation for large-scale networks.
△ Less
Submitted 28 June, 2020; v1 submitted 4 February, 2020;
originally announced February 2020.
-
Large-Scale Fading Precoding for Maximizing the Product of SINRs
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers the large-scale fading precoding design for mitigating the pilot contamination in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems. Rician fading with spatially correlated channels are considered where the line-of-sight (LOS) components of the channels are randomly phase-shifted in each coherence block. The large-scale fading precoding weights a…
▽ More
This paper considers the large-scale fading precoding design for mitigating the pilot contamination in the downlink of multi-cell massive MIMO (multiple-input multiple-output) systems. Rician fading with spatially correlated channels are considered where the line-of-sight (LOS) components of the channels are randomly phase-shifted in each coherence block. The large-scale fading precoding weights are designed based on maximizing the product of the signal-to-interference-plus-noise ratios (SINRs) of the users, which provides a good balance between max-min fairness and sum rate maximization. The spectral efficiency (SE) is derived based on the scaled least squares (LS) estimates of the channels, which only utilize the despreaded pilot signals without any matrix inversion. Simulation results show that the two-layer large-scale fading precoding improves the SE of almost all users compared to the conventional single-layer precoding.
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
Max-Min Fair Wireless-Powered Cell-Free Massive MIMO for Uncorrelated Rician Fading Channels
Authors:
Özlem Tuğfe Demir,
Emil Björnson
Abstract:
This paper considers cell-free massive multiple-input multiple-output systems where the multiple-antenna access points (APs) assist the single-antenna user equipments (UEs) by wireless power transfer. The UEs utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the APs. We consider practical Rician fading with the line-of-sight components of the channels…
▽ More
This paper considers cell-free massive multiple-input multiple-output systems where the multiple-antenna access points (APs) assist the single-antenna user equipments (UEs) by wireless power transfer. The UEs utilize the energy harvested in the downlink to transmit uplink pilot and information signals to the APs. We consider practical Rician fading with the line-of-sight components of the channels being phase-shifted in each coherence block. The uplink spectral efficiency (SE) is derived for this model and the max-min fairness problem is considered where the optimization variables are the AP and UE power control coefficients together with the large-scale fading decoding vectors. The objective is to maximize the minimum SE of the users under APs' and UEs' transmission power constraints. An alternating optimization algorithm is proposed for the solution of the highly-coupled non-convex problem.
△ Less
Submitted 25 January, 2020;
originally announced January 2020.
-
RadioWeaves for efficient connectivity: analysis andimpact of constraints in actual deployments
Authors:
Liesbet Van der Perre,
Erik G. Larsson,
Fredrik Tufvesson,
Lieven De Strycker,
Emil Björnson,
Ove Edfors
Abstract:
We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the en…
▽ More
We present a new type of wireless access infras-tructure consisting of a fabric of dispersed electronic circuitsand antennas that collectively function as a massive, distributed antenna array. We have chosen to name this new wireless infrastructure 'RadioWeaves' and anticipate they can be integrated into indoor and outdoor walls, furniture, and otherobjects, rendering them a natural part of the environment. Technologically, RadioWeaves will deploy distributed arrays to create both favorable propagation and antenna array interaction. The technology leverages on the ideas of large-scale intelligent surfaces and cell-free wireless access. Offering close to the service connectivity and computing, new grades in energy efficiency,reliability, and low latency can be reached. The new concept moreover can be scaled up easily to offer a very high capacity inspecific areas demanding so. In this paper we anticipate how two different demanding use cases can be served well by a dedicated RadioWeaves deployment: a crowd scenario and a highly reflective factory environment. A practical approach towards a RadioWeaves prototype, integrating dispersed electronics invisibly in a room environment, is introduced. We outline diverse R\&D challenges that need to be addressed to realize the great potential of the RadioWeaves technology.
△ Less
Submitted 16 January, 2020;
originally announced January 2020.
-
Two Applications of Deep Learning in the Physical Layer of Communication Systems
Authors:
Emil Björnson,
Pontus Giselsson
Abstract:
Deep learning has proved itself to be a powerful tool to develop data-driven signal processing algorithms for challenging engineering problems. By learning the key features and characteristics of the input signals, instead of requiring a human to first identify and model them, learned algorithms can beat many man-made algorithms. In particular, deep neural networks are capable of learning the comp…
▽ More
Deep learning has proved itself to be a powerful tool to develop data-driven signal processing algorithms for challenging engineering problems. By learning the key features and characteristics of the input signals, instead of requiring a human to first identify and model them, learned algorithms can beat many man-made algorithms. In particular, deep neural networks are capable of learning the complicated features in nature-made signals, such as photos and audio recordings, and use them for classification and decision making.
The situation is rather different in communication systems, where the information signals are man-made, the propagation channels are relatively easy to model, and we know how to operate close to the Shannon capacity limits. Does this mean that there is no role for deep learning in the development of future communication systems?
△ Less
Submitted 2 January, 2021; v1 submitted 10 January, 2020;
originally announced January 2020.
-
Impact of Backward Crosstalk in 2x2 MIMO Transmitters on NMSE and Spectral Efficiency
Authors:
Peter Händel,
Özlem Tuğfe Demir,
Emil Björnson,
Daniel Rönnow
Abstract:
We consider backward crosstalk in 2 x 2 transmitters, which is caused by crosstalk from the outputs of the transmitter to the inputs or by the combination of output crosstalk and impedance mismatch. We analyze its impact via feedback networks together with third-order power amplifier non-linearities. We utilize the Bussgang decomposition to express the distorted output signals of the transmitter a…
▽ More
We consider backward crosstalk in 2 x 2 transmitters, which is caused by crosstalk from the outputs of the transmitter to the inputs or by the combination of output crosstalk and impedance mismatch. We analyze its impact via feedback networks together with third-order power amplifier non-linearities. We utilize the Bussgang decomposition to express the distorted output signals of the transmitter as a linear transformation of the input plus uncorrelated distortion. The normalized mean-square errors (NMSEs) between the distorted and desired amplified signals are expressed analytically and the optimal closed-form power back-off that minimizes the worst NMSE of the two branches is derived. In the second part of the paper, an achievable spectral efficiency (SE) is presented for the communication from this ``dirty'' transmitter to another single-antenna receiver. The SE-maximizing precoder is optimally found by exploiting the hardware characteristics. Furthermore, the optimal power back-off is analyzed for two sub-optimal precoders, which either do not exploit any hardware knowledge or only partial knowledge. The simulation results show that the performance of these sub-optimal precoders is close-to-optimal. We also discuss how the analysis in this paper can be extended to transmitters with an arbitrary number of antenna branches.
△ Less
Submitted 4 May, 2020; v1 submitted 18 December, 2019;
originally announced December 2019.
-
Optimal Design of Energy-Efficient Cell-Free Massive MIMO: Joint Power Allocation and Load Balancing
Authors:
Trinh Van Chien,
Emil Björnson,
Erik G. Larsson
Abstract:
A large-scale distributed antenna system that serves the users by coherent joint transmission is called Cell-free Massive MIMO (multiple input multiple output). For a given user set, only a subset of the access points (APs) is likely needed to satisfy the users' performance demands. To find a flexible and energy-efficient implementation, we minimize the total power consumption at the APs in the do…
▽ More
A large-scale distributed antenna system that serves the users by coherent joint transmission is called Cell-free Massive MIMO (multiple input multiple output). For a given user set, only a subset of the access points (APs) is likely needed to satisfy the users' performance demands. To find a flexible and energy-efficient implementation, we minimize the total power consumption at the APs in the downlink, considering both the hardware and transmit powers, where APs can be turned off. Even though this is a non-convex optimization problem, a globally optimal solution is obtained by solving a mixed-integer second-order cone program. We also propose a low-complexity algorithm that exploits group-sparsity in the problem formulation. Numerical results manifest that our optimization framework can greatly reduce the power consumption compared to kee** all APs turned on and only minimizing the transmit powers.
△ Less
Submitted 26 November, 2019;
originally announced November 2019.
-
Joint Unicast and Multi-group Multicast Transmission in Massive MIMO Systems
Authors:
Meysam Sadeghi,
Emil Björnson,
Erik G. Larsson,
Chau Yuen,
Thomas L. Marzetta
Abstract:
We study the joint unicast and multi-group multicast transmission in massive multiple-input-multiple-output (MIMO) systems. We consider a system model that accounts for channel estimation and pilot contamination, and derive achievable spectral efficiencies (SEs) for unicast and multicast user terminals (UTs), under maximum ratio transmission and zero-forcing precoding. For unicast transmission, ou…
▽ More
We study the joint unicast and multi-group multicast transmission in massive multiple-input-multiple-output (MIMO) systems. We consider a system model that accounts for channel estimation and pilot contamination, and derive achievable spectral efficiencies (SEs) for unicast and multicast user terminals (UTs), under maximum ratio transmission and zero-forcing precoding. For unicast transmission, our objective is to maximize the weighted sum SE of the unicast UTs, and for the multicast transmission, our objective is to maximize the minimum SE of the multicast UTs. These two objectives are coupled in a conflicting manner, due to their shared power resource. Therefore, we formulate a multiobjective optimization problem (MOOP) for the two conflicting objectives. We derive the Pareto boundary of the MOOP analytically. As each Pareto optimal point describes a particular efficient trade-off between the two objectives of the system, we determine the values of the system parameters (uplink training powers, downlink transmission powers, etc.) to achieve any desired Pareto optimal point. Moreover, we prove that the Pareto region is convex, hence the system should serve the unicast and multicast UTs at the same time-frequency resource. Finally, we validate our results using numerical simulations.
△ Less
Submitted 19 November, 2019;
originally announced November 2019.
-
Channel Estimation in Massive MIMO under Hardware Non-Linearities: Bayesian Methods versus Deep Learning
Authors:
Özlem Tugfe Demir,
Emil Björnson
Abstract:
This paper considers the joint impact of non-linear hardware impairments at the base station (BS) and user equipments (UEs) on the uplink performance of single-cell massive MIMO (multiple-input multiple-output) in practical Rician fading environments. First, Bussgang decomposition-based effective channels and distortion characteristics are analytically derived and the spectral efficiency (SE) achi…
▽ More
This paper considers the joint impact of non-linear hardware impairments at the base station (BS) and user equipments (UEs) on the uplink performance of single-cell massive MIMO (multiple-input multiple-output) in practical Rician fading environments. First, Bussgang decomposition-based effective channels and distortion characteristics are analytically derived and the spectral efficiency (SE) achieved by several receivers are explored for third-order non-linearities. Next, two deep feedforward neural networks are designed and trained to estimate the effective channels and the distortion variance at each BS antenna, which are used in signal detection. We compare the performance of the proposed methods with state-of-the-art distortion-aware and -unaware Bayesian linear minimum mean-squared error (LMMSE) estimators. The proposed deep learning approach improves the estimation quality by exploiting impairment characteristics, while LMMSE methods treat distortion as noise. Using the data generated by the derived effective channels for general order of non-linearities at both the BS and UEs, it is shown that the deep learning-based estimator provides better estimates of the effective channels also for non-linearities more than order three.
△ Less
Submitted 13 January, 2020; v1 submitted 17 November, 2019;
originally announced November 2019.
-
Dynamic Resource Allocation in Co-Located and Cell-Free Massive MIMO
Authors:
Zheng Chen,
Emil Björnson,
Erik G. Larsson
Abstract:
In this paper, we study joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with randomly arriving data traffic. We consider both co-located and Cell-Free (CF) Massive MIMO, where the difference lies in whether the antennas are co-located at the base station or spread over a wide network area. The data is generated at each user according to an individ…
▽ More
In this paper, we study joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with randomly arriving data traffic. We consider both co-located and Cell-Free (CF) Massive MIMO, where the difference lies in whether the antennas are co-located at the base station or spread over a wide network area. The data is generated at each user according to an individual stochastic process. Using Lyapunov optimization techniques, we develop a dynamic scheduling algorithm (DSA), which decides at each time slot the amount of data to admit to the transmission queues and the transmission rates over the wireless channel. The proposed algorithm optimizes the long-term user throughput under various fairness policies while kee** the transmission queues stable. Simulation results show that the state-of-the-art power control schemes developed for Massive MIMO with infinite backlogs can fail to stabilize the system even when the data arrival rates are within the network capacity region. Our proposed DSA shows advantage in providing finite delay with performance optimization whenever the network can be stabilized.
△ Less
Submitted 22 November, 2019; v1 submitted 13 November, 2019;
originally announced November 2019.
-
Intelligent Reflecting Surfaces: Physics, Propagation, and Pathloss Modeling
Authors:
Özgecan Özdogan,
Emil Björnson,
Erik G. Larsson
Abstract:
Intelligent reflecting surfaces can improve the communication between a source and a destination. The surface contains metamaterial that is configured to "reflect" the incident wave from the source towards the destination. Two incompatible pathloss models have been used in prior work. In this letter, we derive the far-field pathloss using physical optics techniques and explain why the surface cons…
▽ More
Intelligent reflecting surfaces can improve the communication between a source and a destination. The surface contains metamaterial that is configured to "reflect" the incident wave from the source towards the destination. Two incompatible pathloss models have been used in prior work. In this letter, we derive the far-field pathloss using physical optics techniques and explain why the surface consists of many elements that individually act as diffuse scatterers but can jointly beamform the signal in a desired direction with a certain beamwidth. We disprove one of the previously conjectured pathloss models.
△ Less
Submitted 16 December, 2019; v1 submitted 7 October, 2019;
originally announced November 2019.
-
Optimizing Information Freshness in a Multiple Access Channel with Heterogeneous Devices
Authors:
Zheng Chen,
Nikolaos Pappas,
Emil Björnson,
Erik G. Larsson
Abstract:
In this work, we study age-optimal scheduling with stability constraints in a multiple access channel with two heterogeneous source nodes transmitting to a common destination. The first node is connected to a power grid and it has randomly arriving data packets. Another energy harvesting (EH) sensor monitors a stochastic process and sends status updates to the destination. We formulate an optimiza…
▽ More
In this work, we study age-optimal scheduling with stability constraints in a multiple access channel with two heterogeneous source nodes transmitting to a common destination. The first node is connected to a power grid and it has randomly arriving data packets. Another energy harvesting (EH) sensor monitors a stochastic process and sends status updates to the destination. We formulate an optimization problem that aims at minimizing the average age of information (AoI) of the EH node subject to the queue stability condition of the grid-connected node. First, we consider a Probabilistic Random Access (PRA) policy where both nodes make independent transmission decisions based on some fixed probability distributions. We show that with this policy, the average AoI is equal to the average peak AoI, if the EH node only sends freshly generated samples. In addition, we derive the optimal solution in closed form, which reveals some interesting properties of the considered system. Furthermore, we consider a Drift-Plus-Penalty (DPP) policy and develop AoI-optimal and peak-AoI-optimal scheduling algorithms using the Lyapunov optimization theory. Simulation results show that the DPP policy outperforms the PRA policy in various scenarios, especially when the destination node has low multi-packet reception capabilities.
△ Less
Submitted 25 February, 2021; v1 submitted 10 October, 2019;
originally announced October 2019.
-
Prospective Multiple Antenna Technologies for Beyond 5G
Authors:
Jiayi Zhang,
Emil Björnson,
Michail Matthaiou,
Derrick Wing Kwan Ng,
Hong Yang,
David J. Love
Abstract:
Multiple antenna technologies have attracted large research interest for several decades and have gradually made their way into mainstream communication systems. Two main benefits are adaptive beamforming gains and spatial multiplexing, leading to high data rates per user and per cell, especially when large antenna arrays are used. Now that multiple antenna technology has become a key component of…
▽ More
Multiple antenna technologies have attracted large research interest for several decades and have gradually made their way into mainstream communication systems. Two main benefits are adaptive beamforming gains and spatial multiplexing, leading to high data rates per user and per cell, especially when large antenna arrays are used. Now that multiple antenna technology has become a key component of the fifth-generation (5G) networks, it is time for the research community to look for new multiple antenna applications to meet the immensely higher data rate, reliability, and traffic demands in the beyond 5G era. We need radically new approaches to achieve orders-of-magnitude improvements in these metrics and this will be connected to large technical challenges, many of which are yet to be identified. In this survey paper, we present a survey of three new multiple antenna related research directions that might play a key role in beyond 5G networks: Cell-free massive multiple-input multiple-output (MIMO), beamspace massive MIMO, and intelligent reflecting surfaces. More specifically, the fundamental motivation and key characteristics of these new technologies are introduced. Recent technical progress is also presented. Finally, we provide a list of other prospective future research directions.
△ Less
Submitted 24 March, 2020; v1 submitted 30 September, 2019;
originally announced October 2019.
-
Local Partial Zero-Forcing Precoding for Cell-Free Massive MIMO
Authors:
Giovanni Interdonato,
Marcus Karlsson,
Emil Björnson,
Erik G. Larsson
Abstract:
Cell-free Massive MIMO (multiple-input multiple-output) is a promising distributed network architecture for 5G-and-beyond systems. It guarantees ubiquitous coverage at high spectral efficiency (SE) by leveraging signal co-processing at multiple access points (APs), aggressive spatial user multiplexing and extraordinary macro-diversity gain.
In this study, we propose two distributed precoding sch…
▽ More
Cell-free Massive MIMO (multiple-input multiple-output) is a promising distributed network architecture for 5G-and-beyond systems. It guarantees ubiquitous coverage at high spectral efficiency (SE) by leveraging signal co-processing at multiple access points (APs), aggressive spatial user multiplexing and extraordinary macro-diversity gain.
In this study, we propose two distributed precoding schemes, referred to as \textit{local partial zero-forcing} (PZF) and \textit{local protective partial zero-forcing} (PPZF), that further improve the spectral efficiency by providing an adaptable trade-off between interference cancelation and boosting of the desired signal, with no additional front-hauling overhead, and implementable by APs with very few antennas.
We derive closed-form expressions for the achievable SE under the assumption of independent Rayleigh fading channel, channel estimation error and pilot contamination. PZF and PPZF can substantially outperform maximum ratio transmission and zero-forcing, and their performance is comparable to that achieved by regularized zero-forcing (RZF), which is a benchmark in the downlink. Importantly, these closed-form expressions can be employed to devise optimal (long-term) power control strategies that are also suitable for RZF, whose closed-form expression for the SE is not available.
△ Less
Submitted 16 April, 2020; v1 submitted 3 September, 2019;
originally announced September 2019.
-
Demystifying the Power Scaling Law of Intelligent Reflecting Surfaces and Metasurfaces
Authors:
Emil Björnson,
Luca Sanguinetti
Abstract:
Intelligent reflecting surfaces (IRSs) have recently attracted the attention of communication theorists as a means to control the wireless propagation channel. It has been shown that the signal-to-noise ratio (SNR) of a single-user IRS-aided transmission increases as $N^2$, with $N$ being the number of passive reflecting elements in the IRS. This has been interpreted as a major potential advantage…
▽ More
Intelligent reflecting surfaces (IRSs) have recently attracted the attention of communication theorists as a means to control the wireless propagation channel. It has been shown that the signal-to-noise ratio (SNR) of a single-user IRS-aided transmission increases as $N^2$, with $N$ being the number of passive reflecting elements in the IRS. This has been interpreted as a major potential advantage of using IRSs, instead of conventional Massive MIMO (mMIMO) whose SNR scales only linearly in $N$. This paper shows that this interpretation is incorrect. We first prove analytically that mMIMO always provides higher SNRs, and then show numerically that the gap is substantial; a very large number of reflecting elements is needed for an IRS to obtain SNRs comparable to mMIMO.
△ Less
Submitted 11 November, 2019; v1 submitted 8 August, 2019;
originally announced August 2019.
-
Scalable Cell-Free Massive MIMO Systems
Authors:
Emil Björnson,
Luca Sanguinetti
Abstract:
Imagine a coverage area with many wireless access points that cooperate to jointly serve the users, instead of creating autonomous cells. Such a cell-free network operation can potentially resolve many of the interference issues that appear in current cellular networks. This ambition was previously called Network MIMO (multiple-input multiple-output) and has recently reappeared under the name Cell…
▽ More
Imagine a coverage area with many wireless access points that cooperate to jointly serve the users, instead of creating autonomous cells. Such a cell-free network operation can potentially resolve many of the interference issues that appear in current cellular networks. This ambition was previously called Network MIMO (multiple-input multiple-output) and has recently reappeared under the name Cell-Free Massive MIMO. The main challenge is to achieve the benefits of cell-free operation in a practically feasible way, with computational complexity and fronthaul requirements that are scalable to large networks with many users. We propose a new framework for scalable Cell-Free Massive MIMO systems by exploiting the dynamic cooperation cluster concept from the Network MIMO literature. We provide a novel algorithm for joint initial access, pilot assignment, and cluster formation that is proved to be scalable. Moreover, we adapt the standard channel estimation, precoding, and combining methods to become scalable. A new uplink and downlink duality is proved and used to heuristically design the precoding vectors on the basis of the combining vectors. Interestingly, the proposed scalable precoding and combining outperform conventional maximum ratio processing and also performs closely to the best unscalable alternatives.
△ Less
Submitted 8 May, 2020; v1 submitted 8 August, 2019;
originally announced August 2019.
-
What is the Benefit of Code-domain NOMA in Massive MIMO?
Authors:
Mai T. P. Le,
Luca Sanguinetti,
Emil Björnson,
Maria-Gabriella Di Benedetto
Abstract:
In overloaded Massive MIMO systems, wherein the number K of user equipments (UEs) exceeds the number of base station antennas M, it has recently been shown that non-orthogonal multiple access (NOMA) can increase performance. This paper aims at identifying cases of the classical operating regime K < M, where code-domain NOMA can also improve the spectral efficiency of Massive MIMO. Particular atten…
▽ More
In overloaded Massive MIMO systems, wherein the number K of user equipments (UEs) exceeds the number of base station antennas M, it has recently been shown that non-orthogonal multiple access (NOMA) can increase performance. This paper aims at identifying cases of the classical operating regime K < M, where code-domain NOMA can also improve the spectral efficiency of Massive MIMO. Particular attention is given to use cases in which poor favorable propagation conditions are experienced. Numerical results show that Massive MIMO with planar antenna arrays can benefit from NOMA in practical scenarios where the UEs are spatially close to each other.
△ Less
Submitted 3 July, 2019;
originally announced July 2019.
-
A New Look at Cell-Free Massive MIMO: Making It Practical With Dynamic Cooperation
Authors:
Emil Björnson,
Luca Sanguinetti
Abstract:
This paper takes a new look at Cell-free Massive MIMO (multiple-input multiple-output) through the lens of the dynamic cooperation cluster framework from the Network MIMO literature. The purpose is to identify and address scalability issues that appear in prior work. We provide distributed algorithms for initial access, pilot assignment, cluster formation, precoding, and combining that are scalabl…
▽ More
This paper takes a new look at Cell-free Massive MIMO (multiple-input multiple-output) through the lens of the dynamic cooperation cluster framework from the Network MIMO literature. The purpose is to identify and address scalability issues that appear in prior work. We provide distributed algorithms for initial access, pilot assignment, cluster formation, precoding, and combining that are scalable in the sense of being implementable with arbitrarily many users. Interestingly, the suggested precoding and combining outperform conjugate beamforming and matched filtering, respectively, while also being fully distributed.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Intelligent Reflecting Surface vs. Decode-and-Forward: How Large Surfaces Are Needed to Beat Relaying?
Authors:
Emil Björnson,
Özgecan Özdogan,
Erik G. Larsson
Abstract:
The rate and energy efficiency of wireless channels can be improved by deploying software-controlled metasurfaces to reflect signals from the source to the destination, especially when the direct path is weak. While previous works mainly optimized the reflections, this letter compares the new technology with classic decode-and-forward (DF) relaying. The main observation is that very high rates and…
▽ More
The rate and energy efficiency of wireless channels can be improved by deploying software-controlled metasurfaces to reflect signals from the source to the destination, especially when the direct path is weak. While previous works mainly optimized the reflections, this letter compares the new technology with classic decode-and-forward (DF) relaying. The main observation is that very high rates and/or large metasurfaces are needed to outperform DF relaying, both in terms of minimizing the total transmit power and maximizing the energy efficiency, which also includes the dissipation in the transceiver hardware.
△ Less
Submitted 11 November, 2019; v1 submitted 10 June, 2019;
originally announced June 2019.
-
Reproducible Research: Best Practices and Potential Misuse
Authors:
Emil Björnson
Abstract:
The scientific world is becoming more open to the public and fellow researchers. Open access publishing is becoming accepted, even if some publishers are resisting. The next step is the open code and data paradigm, which was briefly discussed in the "From the Editor" column in the November 2018 issue of IEEE Signal Processing Magazine (SPM) [1]. In this column, I follow up on this topic by sharing…
▽ More
The scientific world is becoming more open to the public and fellow researchers. Open access publishing is becoming accepted, even if some publishers are resisting. The next step is the open code and data paradigm, which was briefly discussed in the "From the Editor" column in the November 2018 issue of IEEE Signal Processing Magazine (SPM) [1]. In this column, I follow up on this topic by sharing my experiences, best practices, and thoughts about reproducible research.
△ Less
Submitted 2 May, 2019;
originally announced May 2019.
-
Dynamic Scheduling and Power Control in Uplink Massive MIMO with Random Data Arrivals
Authors:
Zheng Chen,
Emil Björnson,
Erik G. Larsson
Abstract:
In this paper, we study the joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with random data arrivals. The data is generated at each user according to an individual stochastic process. Using Lyapunov optimization techniques, we develop a dynamic scheduling algorithm (DSA), which decides at each time slot the amount of data to admit to the transmis…
▽ More
In this paper, we study the joint power control and scheduling in uplink massive multiple-input multiple-output (MIMO) systems with random data arrivals. The data is generated at each user according to an individual stochastic process. Using Lyapunov optimization techniques, we develop a dynamic scheduling algorithm (DSA), which decides at each time slot the amount of data to admit to the transmission queues and the transmission rates over the wireless channel. The proposed algorithm achieves nearly optimal performance on the long-term user throughput under various fairness policies. Simulation results show that the DSA can improve the time-average delay performance compared to the state-of-the-art power control schemes developed for Massive MIMO with infinite backlogs.
△ Less
Submitted 9 April, 2019;
originally announced April 2019.
-
Towards Massive MIMO 2.0: Understanding spatial correlation, interference suppression, and pilot contamination
Authors:
Luca Sanguinetti,
Emil Björnson,
Jakob Hoydis
Abstract:
Since the seminal paper by Marzetta from 2010, Massive MIMO has changed from being a theoretical concept with an infinite number of antennas to a practical technology. The key concepts are adopted in 5G and base stations (BSs) with $M=64$ full-digital transceivers have been commercially deployed in sub-6\,GHz bands. The fast progress was enabled by many solid research contributions of which the va…
▽ More
Since the seminal paper by Marzetta from 2010, Massive MIMO has changed from being a theoretical concept with an infinite number of antennas to a practical technology. The key concepts are adopted in 5G and base stations (BSs) with $M=64$ full-digital transceivers have been commercially deployed in sub-6\,GHz bands. The fast progress was enabled by many solid research contributions of which the vast majority assume spatially uncorrelated channels and signal processing schemes developed for single-cell operation. These assumptions make the performance analysis and optimization of Massive MIMO tractable but have three major caveats: 1) practical channels are spatially correlated; 2) large performance gains can be obtained by multicell processing, without BS cooperation; 3) the interference caused by pilot contamination creates a finite capacity limit, as $M\to\infty$. There is a thin line of papers that avoided these caveats, but the results are easily missed. Hence, this tutorial article explains the importance of considering spatial channel correlation and using signal processing schemes designed for multicell networks. We present recent results on the fundamental limits of Massive MIMO, which are not determined by pilot contamination but the ability to acquire channel statistics. These results will guide the journey towards the next level of Massive MIMO, which we call ``Massive MIMO 2.0''.
△ Less
Submitted 5 October, 2019; v1 submitted 6 April, 2019;
originally announced April 2019.