-
Spatio-temporal Signatures of Elasto-inertial Turbulence in Viscoelastic Planar Jets
Authors:
Sami Yamani,
Yashasvi Raj,
Tamer A. Zaki,
Gareth H. McKinley,
Irmgard Bischofberger
Abstract:
The interplay between viscoelasticity and inertia in dilute polymer solutions at high deformation rates can result in inertio-elastic instabilities. The nonlinear evolution of these instabilities generates a state of turbulence with significantly different spatio-temporal features compared to Newtonian turbulence, termed elasto-inertial turbulence (EIT). We explore EIT by studying the dynamics of…
▽ More
The interplay between viscoelasticity and inertia in dilute polymer solutions at high deformation rates can result in inertio-elastic instabilities. The nonlinear evolution of these instabilities generates a state of turbulence with significantly different spatio-temporal features compared to Newtonian turbulence, termed elasto-inertial turbulence (EIT). We explore EIT by studying the dynamics of a submerged planar jet of a dilute aqueous polymer solution injected into a quiescent tank of water using a combination of schlieren imaging and laser Doppler velocimetry (LDV). We show how fluid elasticity has a nonmonotonic effect on the jet stability depending on its magnitude, creating two distinct regimes in which elastic effects can either destabilize or stabilize the jet. In agreement with linear stability analyses of viscoelastic jets, an inertio-elastic shear-layer instability emerges near the edge of the jet for small levels of elasticity, independent of bulk undulations in the fluid column. The growth of this disturbance mode destabilizes the flow, resulting in a turbulence transition at lower Reynolds numbers and closer to the nozzle compared to the conditions required for the transition to turbulence in a Newtonian jet. Increasing the fluid elasticity merges the shear-layer instability into a bulk instability of the jet column. In this regime, elastic tensile stresses generated in the shear layer act as an "elastic membrane" that partially stabilizes the flow, retarding the transition to turbulence to higher levels of inertia and greater distances from the nozzle. In the fully turbulent state far from the nozzle, planar viscoelastic jets exhibit unique spatio-temporal features associated with EIT. The time-averaged angle of jet spreading, an Eulerian measure of the degree of entrainment, and the centerline velocity of the jets both evolve self-similarly with distance from the nozzle. The autocovariance of the schlieren images in the fully turbulent region of the jets shows coherent structures that are elongated in the streamwise direction, consistent with the suppression of streamwise vortices by elastic stresses. These coherent structures give a higher spectral energy to small frequency modes in EIT characterized by LDV measurements of the velocity fluctuations at the jet centerline. Finally, our LDV measurements reveal a frequency spectrum characterized by a $-3$ power-law exponent, different from the well-known $-5/3$ power-law exponent characteristic of Newtonian turbulence.
△ Less
Submitted 23 May, 2023; v1 submitted 21 July, 2022;
originally announced July 2022.
-
Yield precursor in primary creep of colloidal gels
Authors:
Jae Hyung Cho,
Irmgard Bischofberger
Abstract:
Predicting the time-dependent yielding of colloidal gels under constant stress enables control of their mechanical stability and transport. Using rotational rheometry, we show that the shear rate of colloidal gels during an early stage of deformation known as primary creep can forecast an eventual yielding. Irrespective of whether the gel strain-softens or strain-hardens, the shear rate before fai…
▽ More
Predicting the time-dependent yielding of colloidal gels under constant stress enables control of their mechanical stability and transport. Using rotational rheometry, we show that the shear rate of colloidal gels during an early stage of deformation known as primary creep can forecast an eventual yielding. Irrespective of whether the gel strain-softens or strain-hardens, the shear rate before failure exhibits a characteristic power-law decrease as a function of time, distinct from the linear viscoelastic response. We model this early-stage behavior as a series of uncorrelated local plastic events that are thermally activated, which illuminates the exponential dependence of the yield time on the applied stress. This precursor to yield in the macroscopic shear rate provides a convenient tool to identify the fate of a gel well in advance of the actual yielding.
△ Less
Submitted 8 December, 2021;
originally announced December 2021.
-
Lasting effects of discontinuous shear thickening in cornstarch suspensions upon flow cessation
Authors:
Jae Hyung Cho,
Andrew H. Griese,
Ivo R. Peters,
Irmgard Bischofberger
Abstract:
Dense suspensions that exhibit discontinuous shear thickening (DST) undergo complex stress relaxation when the flow abruptly stops. Using rotational rheometry, we study the two-step relaxation of aqueous cornstarch suspensions out of the DST state upon flow cessation and show that the DST fluid retains the memory of its shear-thickening state until the shear stress reaches a constant value at late…
▽ More
Dense suspensions that exhibit discontinuous shear thickening (DST) undergo complex stress relaxation when the flow abruptly stops. Using rotational rheometry, we study the two-step relaxation of aqueous cornstarch suspensions out of the DST state upon flow cessation and show that the DST fluid retains the memory of its shear-thickening state until the shear stress reaches a constant value at late times. We find that this residual stress at the end of the relaxation increases with the steady-state viscosity before the cessation. Furthermore, the timescales that characterize the two-step exponential decay of the shear stress exhibit near linear dependence on the steady-state viscosity. Within the current framework that ascribes DST to the breakdown of hydrodynamic lubrication layers leading to interparticle frictional contacts, the lasting effects of the steady-state viscosity suggest that the memory of frictional contacts persists until the end of the relaxation, despite the presence of repulsive forces between the particles. These results indicate that complete, spontaneous relaxation of the system out of DST is stalled by the partial retention of the frictional force chains, which may be caused by the stationary boundaries and the adhesion between cornstarch particles.
△ Less
Submitted 2 November, 2021;
originally announced November 2021.
-
Perspectives on viscoelastic flow instabilities and elastic turbulence
Authors:
Sujit S. Datta,
Arezoo M. Ardekani,
Paulo E. Arratia,
Antony N. Beris,
Irmgard Bischofberger,
Jens G. Eggers,
J. Esteban López-Aguilar,
Suzanne M. Fielding,
Anna Frishman,
Michael D. Graham,
Jeffrey S. Guasto,
Simon J. Haward,
Sarah Hormozi,
Gareth H. McKinley,
Robert J. Poole,
Alexander Morozov,
V. Shankar,
Eric S. G. Shaqfeh,
Amy Q. Shen,
Holger Stark,
Victor Steinberg,
Ganesh Subramanian,
Howard A. Stone
Abstract:
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the h…
▽ More
Viscoelastic fluids are a common subclass of rheologically complex materials that are encountered in diverse fields from biology to polymer processing. Often the flows of viscoelastic fluids are unstable in situations where ordinary Newtonian fluids are stable, owing to the nonlinear coupling of the elastic and viscous stresses. Perhaps more surprisingly, the instabilities produce flows with the hallmarks of turbulence -- even though the effective Reynolds numbers may be $O(1)$ or smaller. We provide perspectives on viscoelastic flow instabilities by integrating the input from speakers at a recent international workshop: historical remarks, characterization of fluids and flows, discussion of experimental and simulation tools, and modern questions and puzzles that motivate further studies of this fascinating subject. The materials here will be useful for researchers and educators alike, especially as the subject continues to evolve in both fundamental understanding and applications in engineering and the sciences.
△ Less
Submitted 22 August, 2021;
originally announced August 2021.
-
Single-shot quantitative polarization imaging of complex birefringent structure dynamics
Authors:
Baoliang Ge,
Qing Zhang,
Rui Zhang,
**g-Tang Lin,
Po-Hang Tseng,
Che-Wei Chang,
Chen-Yuan Dong,
Renjie Zhou,
Zahid Yaqoob,
Irmgard Bischofberger,
Peter T. C. So
Abstract:
Polarization light microscopes are powerful tools for probing molecular order and orientation in birefringent materials. While a multitude of polarization light microscopy techniques are often used to access steady-state properties of birefringent samples, quantitative measurements of the molecular orientation dynamics on the millisecond time scale have remained a challenge. We propose polarized s…
▽ More
Polarization light microscopes are powerful tools for probing molecular order and orientation in birefringent materials. While a multitude of polarization light microscopy techniques are often used to access steady-state properties of birefringent samples, quantitative measurements of the molecular orientation dynamics on the millisecond time scale have remained a challenge. We propose polarized shearing interference microscopy (PSIM), a single-shot quantitative polarization imaging method, for extracting the retardance and orientation angle of the laser beam transmitting through optically anisotropic specimens with complex structures. The measurement accuracy and imaging performances of PSIM are validated by imaging a rotating wave plate and a bovine tendon specimen. We demonstrate that PSIM can quantify the dynamics of a flowing lyotropic chromonic liquid crystal in a microfluidic channel at an imaging speed of 506 frames per second (only limited by the camera frame rate), with a field-of-view of up to $350\times350 μm^2$ and a diffraction-limit spatial resolution of $\sim 2μm$. We envision that PSIM will find a broad range of applications in quantitative material characterization under dynamical conditions.
△ Less
Submitted 10 June, 2021;
originally announced June 2021.
-
Two Modes of Cluster Dynamics Govern the Viscoelasticity of Colloidal Gels
Authors:
Jae Hyung Cho,
Irmgard Bischofberger
Abstract:
Colloidal gels formed by strongly attractive particles at low particle volume fractions are composed of space-spanning networks of uniformly sized clusters. We study the thermal fluctuations of the clusters using differential dynamic microscopy by decomposing them into two modes of dynamics, and link them to the macroscopic viscoelasticity via rheometry. The first mode, dominant at early times, re…
▽ More
Colloidal gels formed by strongly attractive particles at low particle volume fractions are composed of space-spanning networks of uniformly sized clusters. We study the thermal fluctuations of the clusters using differential dynamic microscopy by decomposing them into two modes of dynamics, and link them to the macroscopic viscoelasticity via rheometry. The first mode, dominant at early times, represents the localized, elastic fluctuations of individual clusters. The second mode, pronounced at late times, reflects the collective, viscoelastic dynamics facilitated by the connectivity of the clusters. By mixing two types of particles of distinct attraction strengths in different proportions, we control the transition time at which the collective mode starts to dominate, and hence tune the frequency dependence of the linear viscoelastic moduli of the binary gels.
△ Less
Submitted 2 March, 2021;
originally announced March 2021.
-
Growth morphology and symmetry selection of interfacial instabilities in anisotropic environments
Authors:
Qing Zhang,
Amin Amooie,
Martin Z. Bazant,
Irmgard Bischofberger
Abstract:
The displacement of a fluid by another less viscous one in a quasi-two dimensional geometry typically leads to complex fingering patterns. In an isotropic system, dense-branching growth arises, which is characterized by repeated tip-splitting of evolving fingers. When anisotropy is present in the interfacial dynamics, the growth morphology changes to dendritic growth characterized by regular struc…
▽ More
The displacement of a fluid by another less viscous one in a quasi-two dimensional geometry typically leads to complex fingering patterns. In an isotropic system, dense-branching growth arises, which is characterized by repeated tip-splitting of evolving fingers. When anisotropy is present in the interfacial dynamics, the growth morphology changes to dendritic growth characterized by regular structures. We introduce anisotropy by engraving a six-fold symmetric lattice of channels on a Hele-Shaw cell. We show that the morphology transition in miscible fluids depends not only on the previously reported degree of anisotropy set by the lattice topography, but also on the viscosity ratio between the two fluids. Remarkably, the viscosity ratio and the degree of anisotropy also govern the global features of the dendritic patterns, inducing a systematic change from six-fold towards twelve-fold symmetric dendrites. Varying either control parameter provides a new method to tune the symmetry of complex patterns, which may also have relevance for analogous phenomena of gradient-driven interfacial dynamics, such as directional solidification or electrodeposition.
△ Less
Submitted 16 January, 2021; v1 submitted 5 April, 2020;
originally announced April 2020.
-
Criterion for fingering instabilities in colloidal gels
Authors:
Thibaut Divoux,
Asheesh Shukla,
Badis Marsit,
Yacouba Kaloga,
Irmgard Bischofberger
Abstract:
We sandwich a colloidal gel between two parallel plates and induce a radial flow by lifting the upper plate at a constant velocity. Two distinct scenarios result from such a tensile test: ($i$) stable flows during which the gel undergoes a tensile deformation without yielding, and ($ii$) unstable flows characterized by the radial growth of air fingers into the gel. We show that the unstable regime…
▽ More
We sandwich a colloidal gel between two parallel plates and induce a radial flow by lifting the upper plate at a constant velocity. Two distinct scenarios result from such a tensile test: ($i$) stable flows during which the gel undergoes a tensile deformation without yielding, and ($ii$) unstable flows characterized by the radial growth of air fingers into the gel. We show that the unstable regime occurs beyond a critical energy input, independent of the gel's macroscopic yield stress. This implies a local fluidization of the gel at the tip of the growing fingers and results in the most unstable wavelength of the patterns exhibiting the characteristic scalings of the classical viscous fingering instability. Our work provides a quantitative criterion for the onset of fingering in colloidal gels based on a local shear-induced yielding, in agreement with the delayed failure framework.
△ Less
Submitted 23 April, 2020; v1 submitted 16 February, 2020;
originally announced February 2020.
-
Emergence of Multiscale Dynamics in Colloidal Gels
Authors:
Jae Hyung Cho,
Roberto Cerbino,
Irmgard Bischofberger
Abstract:
To gain insight into the kinetics of colloidal gel evolution at low particle volume fractions $φ$, we utilize differential dynamic microscopy to investigate particle aggregation, geometric percolation, and the subsequent transition to nonergodic dynamics. We report the emergence of unexpectedly rich multiscale dynamics upon the onset of nonergodicity, which separates the wave vectors $q$ into thre…
▽ More
To gain insight into the kinetics of colloidal gel evolution at low particle volume fractions $φ$, we utilize differential dynamic microscopy to investigate particle aggregation, geometric percolation, and the subsequent transition to nonergodic dynamics. We report the emergence of unexpectedly rich multiscale dynamics upon the onset of nonergodicity, which separates the wave vectors $q$ into three different regimes. In the high-$q$ domain, the gel exhibits $φ$-independent internal vibrations of fractal clusters. The intermediate-$q$ domain is dominated by density fluctuations at the length scale of the clusters, as evidenced by the $q$-independence of the relaxation time $τ$. In the low-$q$ domain, the scaling of $τ$ as $q^{-3}$ suggests that the network appears homogeneous. The transitions between these three regimes introduce two characteristic length scales, distinct from the cluster size.
△ Less
Submitted 25 February, 2020; v1 submitted 4 November, 2019;
originally announced November 2019.
-
Designing allostery-inspired response in mechanical networks
Authors:
Jason W. Rocks,
Nidhi Pashine,
Irmgard Bischofberger,
Carl P. Goodrich,
Andrea J. Liu,
Sidney R. Nagel
Abstract:
Recent advances in designing meta-materials have demonstrated that global mechanical properties of disordered spring networks can be tuned by selectively modifying only a small subset of bonds. Here, using a computationally-efficient approach, we extend this idea in order to tune more general properties of networks. With nearly complete success, we are able to produce a strain between any pair of…
▽ More
Recent advances in designing meta-materials have demonstrated that global mechanical properties of disordered spring networks can be tuned by selectively modifying only a small subset of bonds. Here, using a computationally-efficient approach, we extend this idea in order to tune more general properties of networks. With nearly complete success, we are able to produce a strain between any pair of target nodes in a network in response to an applied source strain on any other pair of nodes by removing only ~1% of the bonds. We are also able to control multiple pairs of target nodes, each with a different individual response, from a single source, and to tune multiple independent source/target responses simultaneously into a network. We have fabricated physical networks in macroscopic two- and three-dimensional systems that exhibit these responses. This targeted behavior is reminiscent of the long-range coupled conformational changes that often occur during allostery in proteins. The ease with which we create these responses may give insight into why allostery is a common means for the regulation of activity in biological molecules.
△ Less
Submitted 28 July, 2016;
originally announced July 2016.
-
An island of stability in a sea of fingers: emergent large-scale features of the viscous flow instability
Authors:
Irmgard Bischofberger,
Radha Ramachandran,
Sidney R. Nagel
Abstract:
The displacement of a more viscous fluid by a less viscous one in a quasi-two dimensional geometry leads to the formation of complex fingering patterns. This fingering has been characterized by a most unstable wavelength, $λ_c$, which depends on the viscosity difference between the two immiscible fluids and sets the characteristic width of the fingers. How the finger length grows after the instabi…
▽ More
The displacement of a more viscous fluid by a less viscous one in a quasi-two dimensional geometry leads to the formation of complex fingering patterns. This fingering has been characterized by a most unstable wavelength, $λ_c$, which depends on the viscosity difference between the two immiscible fluids and sets the characteristic width of the fingers. How the finger length grows after the instability occurs is an equally important, but previously overlooked, aspect that characterizes the global features of the patterns. As the lower viscosity fluid is injected, we show that there is a stable inner region where the outer fluid is completely displaced. The ratio of the finger length to the radius of this stable region depends only on the viscosity ratio of the fluids and is decoupled from $λ_c$.
△ Less
Submitted 29 January, 2015; v1 submitted 28 October, 2014;
originally announced October 2014.
-
Co-nonsolvency of PNiPAM at the transition between solvation mechanisms
Authors:
Irmgard Bischofberger,
Davide C. E. Calzolari,
Veronique Trappe
Abstract:
We investigate the co-nonsolvency of poly-N-isopropyl acrylamide (PNiPAM) in different water-alcohol mixtures and show that this phenomenon is due to two distinct solvation contributions governing the phase behavior of PNiPAM in the water-rich and alcohol-rich regime respectively. While hydrophobic hydration is the predominant contribution governing the phase behavior of PNiPAM in the water-rich r…
▽ More
We investigate the co-nonsolvency of poly-N-isopropyl acrylamide (PNiPAM) in different water-alcohol mixtures and show that this phenomenon is due to two distinct solvation contributions governing the phase behavior of PNiPAM in the water-rich and alcohol-rich regime respectively. While hydrophobic hydration is the predominant contribution governing the phase behavior of PNiPAM in the water-rich regime, the mixing contributions governing the phase behavior of classical polymer solutions determine the phase behavior of PNiPAM in the alcohol-rich regime. This is evidenced by distinct scaling relations denoting the energetic state of the aqueous medium as a key parameter for the phase behavior of PNiPAM in the water-rich regime, while the volume fractions of respectively water, alcohol and PNiPAM become relevant parameters in the alcohol-rich regime. Adding alcohol to water decreases the energetics of the aqueous medium, which gradually suppresses hydrophobic hydration, while adding water to alcohol decreases the solvent quality. Consequently, PNiPAM is insoluble in the intermediate range of solvent composition, where neither hydrophobic hydration nor the mixing contributions prevail. This accounts for the co-nonsolvency phenomenon observed for PNiPAM in water-alcohol mixtures.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Fingering versus stability in the limit of zero interfacial tension
Authors:
Irmgard Bischofberger,
Radha Ramachandran,
Sidney R. Nagel
Abstract:
The invasion of one fluid into another of higher viscosity in a quasi-two dimensional geometry typically produces complex fingering patterns. Because interfacial tension suppresses short-wavelength fluctuations, its elimination by using pairs of miscible fluids would suggest an instability producing highly ramified singular structures. Previous studies focused on wavelength selection at the instab…
▽ More
The invasion of one fluid into another of higher viscosity in a quasi-two dimensional geometry typically produces complex fingering patterns. Because interfacial tension suppresses short-wavelength fluctuations, its elimination by using pairs of miscible fluids would suggest an instability producing highly ramified singular structures. Previous studies focused on wavelength selection at the instability onset and overlooked the striking features appearing more globally. Here we investigate the non-linear growth that occurs after the instability has been fully established. We find a rich variety of patterns that are characterized by the viscosity ratio between the inner and the outer fluid, $η_{in}$/$η_{out}$, as distinct from the most-unstable wavelength, which determines the onset of the instability. As $η_{in}$/$η_{out}$ increases, a regime dominated by long highly-branched fractal fingers gives way to one dominated by blunt stable structures characteristic of proportionate growth. Simultaneously, a central region of complete outer-fluid displacement grows until it encompasses the entire pattern at $η_{in}$/$η_{out}$$\approx$0.3.
△ Less
Submitted 27 October, 2014;
originally announced October 2014.
-
Multiple dynamic regimes in concentrated microgel systems
Authors:
David A. Sessoms,
Irmgard Bischofberger,
Luca Cipelletti,
Véronique Trappe
Abstract:
We investigate dynamical heterogeneities in the collective relaxation of a concentrated microgel system, for which the packing fraction can be conveniently varied by changing the temperature. The packing fraction dependent mechanical properties are characterised by a fluid-solid transition, where the system properties switch from a viscous to an elastic low-frequency behaviour. Approaching this tr…
▽ More
We investigate dynamical heterogeneities in the collective relaxation of a concentrated microgel system, for which the packing fraction can be conveniently varied by changing the temperature. The packing fraction dependent mechanical properties are characterised by a fluid-solid transition, where the system properties switch from a viscous to an elastic low-frequency behaviour. Approaching this transition from below, we find that the range of spatial correlations in the dynamics increases. Beyond this transition, the spatial correlation range reaches a maximum, extending over the entire observable system size of approximately 5 mm. Increasing the packing fraction even further leads to a second transition, which is characterised by the development of large zones of lower and higher dynamical activity that are well separated from each other; the range of correlation decreases at this point. This striking non-monotonic dependence of the spatial correlation length on volume fraction is reminiscent of the behaviour recently observed at the jamming/rigidity transition in granular systems (Lechenault et al. 2008). We identify this second transition as the transition to 'squeezed' states, where the constituents of the system start to exert direct contact forces on each other, such that the dynamics becomes increasingly determined by imbalanced stresses. Evidence of this transition is also found in the frequency dependence of the storage and loss moduli, which become increasingly coupled as direct friction between the particles starts to contribute to the dissipative losses within the system. To our knowledge, our data provide the first observation of a qualitative change in dynamical heterogeneity as the dynamics switch from purely thermally-driven to stress-driven.
△ Less
Submitted 30 May, 2011; v1 submitted 14 July, 2009;
originally announced July 2009.