-
Aerodynamic characterization of two tandem wind turbines under yaw misalignment control using actuator line model
Authors:
Yu Tu,
Kai Zhang,
Zhaolong Han,
Dai Zhou,
Onur Bilgen
Abstract:
Yaw control has proven to be promising in alleviating the wake effects that plague the efficiency of wind farms. In this work, the actuator line modeling (ALM) method is adopted to simulate the flows over two tandem turbines distanced by $3 - 7$ rotor diameters, with the yaw angle of the upstream rotor varying from $γ_1=0^{\circ}$ to $50^{\circ}$. The aim is to provide a comprehensive aerodynamic…
▽ More
Yaw control has proven to be promising in alleviating the wake effects that plague the efficiency of wind farms. In this work, the actuator line modeling (ALM) method is adopted to simulate the flows over two tandem turbines distanced by $3 - 7$ rotor diameters, with the yaw angle of the upstream rotor varying from $γ_1=0^{\circ}$ to $50^{\circ}$. The aim is to provide a comprehensive aerodynamic characterization of a simple wind farm under yaw misalignment. With increasing yaw angle, the power generated by the downstream rotor increases, compensating the power loss in the upstream rotor, and resulting in higher total power of the two turbines than that without yaw control. The maximum power output is achieved as the upstream wake of the yawed rotor is redirected away from the downstream rotor plane. Behind the downstream rotor, the secondary steering phenomenon is observed, where the wake is also redirected from the centerline. The use of the actuator line model also reveal unsteady aerodynamic characteristics that can not be captured by lower-fidelity models. For the upstream rotor, the yaw misalignment results in time-varying change in the local angle of attack on the blade, giving rise to unsteady loading. The downstream rotor is partially submerged in the deflected wake incurred by the yawed upstream rotor. As the blade revolves into and out of the wake deficit, the blade experiences cyclic loading, leading to even stronger fluctuations in the aerodynamic loads than the upstream rotor. These analysis provides a comprehensive understanding of the yaw control effects on the two tandem rotors from the perspectives of aerodynamic performance, wake profiles, and unsteady characteristics. The insights gained from the study can aid the design of collective yaw control strategies of wind farms, and lay the foundation for assessing the fatigue damage associated with yaw misalignment.
△ Less
Submitted 3 February, 2023; v1 submitted 1 December, 2022;
originally announced December 2022.
-
Low-Reynolds-number aerodynamic characteristics of airfoils with piezocomposite trailing control surfaces
Authors:
Kai Zhang,
Bharg Shah,
Onur Bilgen
Abstract:
Morphing wings comprised of fixed leading sections with piezocomposite trailing control surfaces have emerged as a novel active control technique for unmanned aerial vehicles. However, the wake dynamics and aerodynamic performance of such hybrid airfoil configuration has not been thoroughly investigated. In this paper, direct numerical simulations of two-dimensional flows over hybrid airfoils comp…
▽ More
Morphing wings comprised of fixed leading sections with piezocomposite trailing control surfaces have emerged as a novel active control technique for unmanned aerial vehicles. However, the wake dynamics and aerodynamic performance of such hybrid airfoil configuration has not been thoroughly investigated. In this paper, direct numerical simulations of two-dimensional flows over hybrid airfoils comprised of NACA 0012 leading sections with piezocomposite trailing control surfaces are performed at a fixed Reynolds number of 1000. The effects of length and camber of the trailing control surface on the laminar aerodynamic characteristics are studied over a wide range of angle of attack. It is shown that the flow behind the airfoil exhibits different features, including steady flow, periodic vortex shedding, and quasi-periodic vortex shedding for different configurations. The transition between these wake states occurs at slightly smaller angles of attack compared to the nominal NACA 0012 airfoil. While the drag coefficient remains close to each other at a fixed angle of attack, the lift coefficient of the hybrid airfoil is positively affected by the length and camber of the trailing control surface. The mechanism of lift generation is examined by surface pressure distributions and a force element analysis. It is revealed that with increased camber of the trailing control surface, the flow on both the suction and pressure sides of the airfoil are modified in a beneficial way to enhance lift. Increasing the length ratio only significantly modifies the flow near the aft section on the pressure side. The results herein provide a laminar aerodynamic characterization of hybrid airfoils with trailing control surfaces, and could potentially aid the design of control techniques for next-generation small unmanned aerial vehicles.
△ Less
Submitted 21 September, 2021;
originally announced September 2021.
-
Effect of pseudo datasets for the classification-based engineering design
Authors:
** Du,
Kai Zhang,
Onur Bilgen,
Laurent Burlion,
Hongyi Xu
Abstract:
Machine learning classification techniques have been used widely to recognize the feasible design domain and discover hidden patterns in engineering design. An accurate classification model needs a large dataset; however, generating a large dataset is costly for complex simulation-based problems. After training by a small dataset, surrogate models can generate a large pseudo dataset efficiently. E…
▽ More
Machine learning classification techniques have been used widely to recognize the feasible design domain and discover hidden patterns in engineering design. An accurate classification model needs a large dataset; however, generating a large dataset is costly for complex simulation-based problems. After training by a small dataset, surrogate models can generate a large pseudo dataset efficiently. Errors, however, may be introduced by surrogate modeling. This paper investigates the mutual effect of a large pseudo dataset and surrogate modeling uncertainty. Four widely used methods, i.e., Naive Bayes classifier, support vector machine, random forest regression, and artificial neural network for classification, are studied on four benchmark problems. Kriging is used as the basic surrogate model method. The results show that a large pseudo dataset improves the classification accuracy, which depends on both design problems and classification algorithms. Except for the Naive Bayes, the other three methods are recommended for using pseudo data to improve classification performance. Also, a wind turbine design problem is used to illustrate the effect of the pseudo dataset on feasible subspace recognition. The large pseudo dataset improves the recognized subspace bound greatly, which can be reproduced by classification models well except for the Naive Bayes classifier. Under the uncertainty of surrogate modeling, the random forest presents high robustness to recognize the feasible design domain bound, while the artificial neural network demonstrates a high sensitivity to uncertainty with the recognized bound deteriorated.
△ Less
Submitted 12 July, 2021;
originally announced July 2021.
-
A New Stable Peer-to-Peer Protocol with Non-persistent Peers
Authors:
Omer Bilgen,
Aaron B. Wagner
Abstract:
Recent studies have suggested that the stability of peer-to-peer networks may rely on persistent peers, who dwell on the network after they obtain the entire file. In the absence of such peers, one piece becomes extremely rare in the network, which leads to instability. Technological developments, however, are poised to reduce the incidence of persistent peers, giving rise to a need for a protocol…
▽ More
Recent studies have suggested that the stability of peer-to-peer networks may rely on persistent peers, who dwell on the network after they obtain the entire file. In the absence of such peers, one piece becomes extremely rare in the network, which leads to instability. Technological developments, however, are poised to reduce the incidence of persistent peers, giving rise to a need for a protocol that guarantees stability with non-persistent peers. We propose a novel peer-to-peer protocol, the group suppression protocol, to ensure the stability of peer-to-peer networks under the scenario that all the peers adopt non-persistent behavior. Using a suitable Lyapunov potential function, the group suppression protocol is proven to be stable when the file is broken into two pieces, and detailed experiments demonstrate the stability of the protocol for arbitrary number of pieces. We define and simulate a decentralized version of this protocol for practical applications. Straightforward incorporation of the group suppression protocol into BitTorrent while retaining most of BitTorrent's core mechanisms is also presented. Subsequent simulations show that under certain assumptions, BitTorrent with the official protocol cannot escape from the missing piece syndrome, but BitTorrent with group suppression does.
△ Less
Submitted 13 November, 2017; v1 submitted 29 August, 2017;
originally announced August 2017.
