-
Harnessing asymmetry to reprogram nonlinear metamaterials on-the-fly with no moving parts
Authors:
Majid Kheybari,
Osama R. Bilal
Abstract:
Various two-dimensional fabrication methods, such as deposition, etching, milling, laser cutting, and water jetting, suffer from asymmetry between the top and the bottom surface of fabricated parts. Such asymmetry is usually undesirable and can compromise functionality, or at least add uncertainty to fabricated components. The common practice is to assume symmetry between the top and the bottom su…
▽ More
Various two-dimensional fabrication methods, such as deposition, etching, milling, laser cutting, and water jetting, suffer from asymmetry between the top and the bottom surface of fabricated parts. Such asymmetry is usually undesirable and can compromise functionality, or at least add uncertainty to fabricated components. The common practice is to assume symmetry between the top and the bottom surfaces by using average dimensions. In this study, we harness such asymmetry to realize metamaterials with dynamically tunable (i. e., re-programmable) properties. Our metamaterial is composed of identical unit cells with two concentric Archimedean spiral cuts and a permanent magnet embedded in the unit cell's center. By utilizing external electromagnets, we further amplify the fabrication asymmetry, through the inherent asymmetry between a repulsive vs attractive state between the permanent magnets and the electromagnets. We demonstrate the utility of our metamaterials by programming its spatiotemporal response in both time and frequency even in the presence of high amplitude harmonic excitation. Our findings can be utilized for broad range of applications, from seismic sensing at low frequency to ultrasonic imaging at higher frequencies.
△ Less
Submitted 18 May, 2023;
originally announced May 2023.
-
Harnessing re-programmable phase transitions to control the propagation of sound waves
Authors:
Audrey A. Watkins,
Austin Eichelberg,
Osama R. Bilal
Abstract:
Metamaterials can enable peculiar static and dynamic behavior (such as negative effective mass density, dynamical stiffness, and Poisson's ratio) due to their geometry rather than their chemical composition. The geometry of these metamaterials can be thought of as the phase of the material, which is usually fixed once the material is fabricated. While there exist many theoretical and numerical stu…
▽ More
Metamaterials can enable peculiar static and dynamic behavior (such as negative effective mass density, dynamical stiffness, and Poisson's ratio) due to their geometry rather than their chemical composition. The geometry of these metamaterials can be thought of as the phase of the material, which is usually fixed once the material is fabricated. While there exist many theoretical and numerical studies of metamaterials that can change phase, or re-program, experimental realizations remain limited due to challenges in manufacturability, the destructive nature of the re-programming and inherent non-linearities. Through a combination of analytical, numerical and experimental analyses, we utilize tunable, self-assembled, nonlinear magnetic lattices to realize metamaterials with reversible phase transitions. Our metamaterials are composed of free-floating disks, with embedded permanent magnets, confined within magnetic boundaries. We exploit the non-destructive nature of the adjustable magnetic boundaries to create a set of re-programmable metamaterials to control the propagation of sound waves. Furthermore, we demonstrate a robust, real-time tunable wave filter at ultra-low frequencies. Our findings can expand the metamaterials horizon into functional and tunable devices.
△ Less
Submitted 29 December, 2021;
originally announced December 2021.
-
Exploiting Localized Transition Waves to Tune Sound Propagation in Soft Materials
Authors:
Audrey A. Watkins,
Austin Eichelberg,
Osama R. Bilal
Abstract:
Programmable materials hold great potential for many applications such as deployable structures, soft robotics, and wave control, however, the presence of instability and disorder might hinder their utilization. Through a combination of analytical, numerical, and experimental analyses, we harness the interplay between instabilities, geometric frustration, and mechanical deformations to control the…
▽ More
Programmable materials hold great potential for many applications such as deployable structures, soft robotics, and wave control, however, the presence of instability and disorder might hinder their utilization. Through a combination of analytical, numerical, and experimental analyses, we harness the interplay between instabilities, geometric frustration, and mechanical deformations to control the propagation of sound waves within self-assembled soft materials. We consider levitated magnetic disks confined by a magnetic boundary in-plane. The assemblies can be either ordered or disordered depending on the intrinsic disk symmetry. By applying an external load to the assembly, we observe the nucleation and propagation of different topological defects within the lattices. In the presence of instabilities, the defect propagation gives rise to time-independent localized transition waves. Surprisingly, in the presence of frustration, the applied load briefly introduces deformation-induced order to the material. By further deforming the lattices, new patterns emerge across all disk symmetries. We utilize these patterns to tune sound propagation through the material. Our findings could open new possibilities for designing exotic materials with potential applications ranging from sound control to soft robotics.
△ Less
Submitted 21 September, 2021;
originally announced September 2021.
-
Experimental realization of phonon demultiplexing in three-dimensions
Authors:
Osama R. Bilal,
Chern Hwee Yee,
Jan Rys,
Christian Schumacher,
Chiara Daraio
Abstract:
Phononic metamaterials enabled the realization of many acoustic components analogous to their electronic counterparts, such as transistors, logic gates and calculators. A key component among these is the demultiplexer, a device that receives multiple signals and sorts them based on their frequencies into separate channels. Previous experimental realizations of acoustic and elastic multiplexers hav…
▽ More
Phononic metamaterials enabled the realization of many acoustic components analogous to their electronic counterparts, such as transistors, logic gates and calculators. A key component among these is the demultiplexer, a device that receives multiple signals and sorts them based on their frequencies into separate channels. Previous experimental realizations of acoustic and elastic multiplexers have employed plates with pillars or holes to demultiplex frequencies. However, existing realizations are confined to two-dimensions, which can limit potential acoustic or elastic circuit design. Here we show the first experimental realization of a three-dimensional, four channel phononic demultiplexer. Our design methodology is based on bundles of pass-bands within a large band gap that can easily be tuned for multi-channel frequency demultiplexing. The proposed design can be utilized in acoustic and elastic information processing, nondestructive evaluation and communication applications among others.
△ Less
Submitted 25 September, 2020;
originally announced September 2020.
-
Demultiplexing infrasound phonons with tunable magnetic lattices
Authors:
Audrey A. Watkins,
Osama R. Bilal
Abstract:
Controlling infrasound signals is crucial to many processes ranging from predicting atmospheric events and seismic activities to sensing nuclear detonations. These waves can be manipulated through phononic crystals and acoustic metamaterials. However, at such ultra-low frequencies, the size (usually on the order of meters) and the mass (usually on the order of many kilograms) of these materials ca…
▽ More
Controlling infrasound signals is crucial to many processes ranging from predicting atmospheric events and seismic activities to sensing nuclear detonations. These waves can be manipulated through phononic crystals and acoustic metamaterials. However, at such ultra-low frequencies, the size (usually on the order of meters) and the mass (usually on the order of many kilograms) of these materials can hinder its potential applications in the infrasonic domain. Here, we utilize tunable lattices of repelling magnets to guide and sort infrasound waves into different channels based on their frequencies. We construct our lattices by confining meta-atoms (free-floating macroscopic disks with embedded magnets) within a magnetic boundary. By changing the confining boundary, we control the meta-atoms' spacing and therefore the intensity of their coupling potentials and wave propagation characteristics. As a demonstration of principle, we present the first experimental realization of an infrasound phonon demultiplexer (i.e., guiding ultra-low frequency waves into different channels based on their frequencies). The realized platform can be utilized to manipulate ultra-low frequency waves, within a relatively small volume, while utilizing negligible mass. In addition, the self-assembly nature of the meta-atoms can be key in creating re-programmable materials with exceptional nonlinear properties.
△ Less
Submitted 8 December, 2020; v1 submitted 17 September, 2020;
originally announced September 2020.
-
A flexible spiraling-metasurface as a versatile haptic interface
Authors:
Osama R. Bilal,
Vincenzo Costanza,
Ali Israr,
Antonio Palermo,
Paolo Celli,
Frances Lau,
Chiara Daraio
Abstract:
Haptic feedback is the most significant sensory interface following visual cues. Develo** thin, flexible surfaces that function as haptic interfaces is important for augmenting virtual reality, wearable devices, robotics and prostheses. For example, adding a haptic feedback interface to prosthesis could improve their acceptance among amputees. State of the art programmable interfaces targeting t…
▽ More
Haptic feedback is the most significant sensory interface following visual cues. Develo** thin, flexible surfaces that function as haptic interfaces is important for augmenting virtual reality, wearable devices, robotics and prostheses. For example, adding a haptic feedback interface to prosthesis could improve their acceptance among amputees. State of the art programmable interfaces targeting the skin feel-of-touch through mechano-receptors are limited by inadequate sensory feedback, cumbersome mechanisms or narrow frequency of operation. Here, we present a flexible metasurface as a generic haptic interface capable of producing complex tactile patterns on the human skin at wide range of frequencies. The metasurface is composed of multiple "pixels" that can locally amplify both input displacements and forces. Each of these pixels encodes various deformation patterns capable of producing different sensations on contact. The metasurface can transform a harmonic signal containing multiple frequencies into a complex preprogrammed tactile pattern. Our findings, corroborated by user studies conducted on human candidates, can open new avenues for wearable and robotic interfaces.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Enhancement of deep-subwavelength band gaps in flat spiral-based phononic metasurfaces using the trampoline phenomena
Authors:
Osama R. Bilal,
André Foehr,
Chiara Daraio
Abstract:
Elastic and acoustic metamaterials can sculpt dispersion of waves through resonances. In turn, resonances can give rise to negative effective properties, usually localized around the resonance frequencies, which support band gaps at subwavelength frequencies (i.e., below the Bragg-scattering limit). However, the band gaps width correlates strongly with the resonators' mass and volume, which limits…
▽ More
Elastic and acoustic metamaterials can sculpt dispersion of waves through resonances. In turn, resonances can give rise to negative effective properties, usually localized around the resonance frequencies, which support band gaps at subwavelength frequencies (i.e., below the Bragg-scattering limit). However, the band gaps width correlates strongly with the resonators' mass and volume, which limits their functionality in applications. Trampoline phenomena have been numerically and experimentally shown to broaden the operational frequency ranges of two-dimensional, pillar-based metamaterials through perforation. In this work, we demonstrate trampoline phenomena in lightweight and planar lattices consisting of arrays of Archimedean spirals in unit cells. Spiral-based metamaterials have been shown to support different band gap opening mechanisms, namely, Bragg-scattering, local resonances and inertia amplification. Here, we numerically analyze and experimentally realize trampoline phenomena in planar metasurfaces for different lattice tessellations. Finally, we carry out a comparative study between trampoline pillars and spirals and show that trampoline spirals outperform the pillars in lightweight, compactness and operational bandwidth.
△ Less
Submitted 28 January, 2020;
originally announced January 2020.
-
Autonomous Deployment of a Solar Panel Using an Elastic Origami and Distributed Shape Memory Polymer Actuators
Authors:
Tian Chen,
Osama R. Bilal,
Robert Lang,
Chiara Daraio,
Kristina Shea
Abstract:
Deployable mechanical systems such as space solar panels rely on the intricate stowage of passive modules, and sophisticated deployment using a network of motorized actuators. As a result, a significant portion of the stowed mass and volume are occupied by these support systems. An autonomous solar panel array deployed using the inherent material behavior remains elusive. In this work, we develop…
▽ More
Deployable mechanical systems such as space solar panels rely on the intricate stowage of passive modules, and sophisticated deployment using a network of motorized actuators. As a result, a significant portion of the stowed mass and volume are occupied by these support systems. An autonomous solar panel array deployed using the inherent material behavior remains elusive. In this work, we develop an autonomous self-deploying solar panel array that is programmed to activate in response to changes in the surrounding temperature. We study an elastic "flasher" origami sheet embedded in a circle of scissor mechanisms, both printed with shape memory polymers. The scissor mechanisms are optimized to provide the maximum expansion ratio while delivering the necessary force for deployment. The origami sheet is also optimized to carry the maximum number of solar panels given space constraints. We show how the folding of the "flasher" origami exhibits a bifurcation behavior resulting in either a cone or disk shape both numerically and in experiments. A folding strategy is devised to avoid the undesired cone shape. The resulting design is entirely 3D printed, achieves an expansion ratio of 1000% in under 40 seconds, and shows excellent agreement with simulation prediction both in the stowed and deployed configurations.
△ Less
Submitted 21 October, 2018;
originally announced October 2018.
-
Architected lattices for simultaneous broadband attenuation of airborne sound and mechanical vibrations in all directions
Authors:
Osama R. Bilal,
David Ballagi,
Chiara Daraio
Abstract:
Phononic crystals and acoustic metamaterials are architected lattices designed to control the propagation of acoustic or elastic waves. In these materials, the dispersion properties and the energy transfer are controlled by selecting the lattices' geometry and their constitutive material properties. Most designs, however, only affect one mode of energy propagation, transmitted either as acoustic,…
▽ More
Phononic crystals and acoustic metamaterials are architected lattices designed to control the propagation of acoustic or elastic waves. In these materials, the dispersion properties and the energy transfer are controlled by selecting the lattices' geometry and their constitutive material properties. Most designs, however, only affect one mode of energy propagation, transmitted either as acoustic, airborne sound or as elastic, structural vibrations. Here, we present a design methodology to attenuate both acoustic and elastic waves simultaneously in all polarizations. We experimentally realize the first three-dimensional, load bearing, architected lattice, composed of a single-material, that responds in a broadband frequency range in all directions.
△ Less
Submitted 4 September, 2018;
originally announced September 2018.
-
Spiral-based phononic plates: From wave beaming to topological insulators
Authors:
André Foehr,
Osama R. Bilal,
Sebastian D. Huber,
Chiara Daraio
Abstract:
Phononic crystals and metamaterials take advantage of pre-designed geometrical structures to sculpt elastic waves, controlling their dispersion using different mechanisms. These mechanisms revolve mostly around Bragg scattering (BS), local resonances (LR) and inertial amplification (IA), which employ ad-hoc, often problem-specific geometries. Here, we use parametrized, spiraling unit cells as buil…
▽ More
Phononic crystals and metamaterials take advantage of pre-designed geometrical structures to sculpt elastic waves, controlling their dispersion using different mechanisms. These mechanisms revolve mostly around Bragg scattering (BS), local resonances (LR) and inertial amplification (IA), which employ ad-hoc, often problem-specific geometries. Here, we use parametrized, spiraling unit cells as building blocks for designing various types of phononic materials. We focus on planar spirals that are easy to fabricate, yet give rise to the desirable complex dynamics. By simple modifications of the spirals, we open full band gaps using BS, LR and IA. Moreover, we alter the underlying unit cell symmetry and lattice vectors, to create wave beaming and topologically protected band gaps, both affecting waves whose wavelength is much larger than the order of periodicity.
△ Less
Submitted 4 December, 2017;
originally announced December 2017.
-
Harnessing bistability for directional propulsion of untethered, soft robots
Authors:
Tian Chen,
Osama R. Bilal,
Kristina Shea,
Chiara Daraio
Abstract:
In most macro-scale robotics systems , propulsion and controls are enabled through a physical tether or complex on-board electronics and batteries. A tether simplifies the design process but limits the range of motion of the robot, while on-board controls and power supplies are heavy and complicate the design process. Here we present a simple design principle for an untethered, entirely soft, swim…
▽ More
In most macro-scale robotics systems , propulsion and controls are enabled through a physical tether or complex on-board electronics and batteries. A tether simplifies the design process but limits the range of motion of the robot, while on-board controls and power supplies are heavy and complicate the design process. Here we present a simple design principle for an untethered, entirely soft, swimming robot with the ability to achieve preprogrammed, directional propulsion without a battery or on-board electronics. Locomotion is achieved by employing actuators that harness the large displacements of bistable elements, triggered by surrounding temperature changes. Powered by shape memory polymer (SMP) muscles, the bistable elements in turn actuates the robot's fins. Our robots are fabricated entirely using a commercially available 3D printer with no post-processing. As a proof-of-concept, we demonstrate the ability to program a vessel, which can autonomously deliver a cargo and navigate back to the deployment point.
△ Less
Submitted 12 October, 2017;
originally announced October 2017.
-
Observation of a phononic quadrupole topological insulator
Authors:
Marc Serra-Garcia,
Valerio Peri,
Roman Süsstrunk,
Osama R. Bilal,
Tom Larsen,
Luis Guillermo Villanueva,
Sebastian D. Huber
Abstract:
The modern theory of charge polarization in solids is based on a generalization of Berry's phase. Its possible quantization lies at the heart of our understanding of all systems with topological band structures that were discovered over the last decades. While based on the concept of the "charge" polarization, the same theory can be used as an elegant tool to characterize the Bloch bands of neutra…
▽ More
The modern theory of charge polarization in solids is based on a generalization of Berry's phase. Its possible quantization lies at the heart of our understanding of all systems with topological band structures that were discovered over the last decades. While based on the concept of the "charge" polarization, the same theory can be used as an elegant tool to characterize the Bloch bands of neutral bosonic systems such as photonic or phononic crystals. Recently, the theory of this quantized polarization was extended from the dipole- to higher multipole-moments. In particular, a two-dimensional quantized quadrupole insulator is predicted to have gapped yet topological one-dimensional edge-modes, which in turn stabilize zero-dimensional in-gap corner states. However, such a state of matter has not been observed experimentally. Here, we provide the first measurements of a phononic quadrupole insulator. We experimentally characterize the bulk, edge, and corner physics of a mechanical metamaterial and find the predicted gapped edge and in-gap corner states. We further corroborate our findings by comparing the mechanical properties of a topologically non-trivial system to samples in other phases predicted by the quadrupole theory. From an application point of view, these topological corner states are an important step** stone on the way to topologically protected wave-guides in higher dimensions and thereby open a new design path for metamaterials.
△ Less
Submitted 27 August, 2020; v1 submitted 16 August, 2017;
originally announced August 2017.
-
Intrinsically polar elastic metamaterials
Authors:
Osama R. Bilal,
Roman Süsstrunk,
Chiara Daraio,
Sebastian D. Huber
Abstract:
The ability to design and fabricate materials with tailored mechanical properties, combined with immunity to damage, is a frontier of materials engineering. For example, materials which are characterized by elastic properties that depend on the position inside a medium are required in applications where structural stability has to be combined with a soft and compliant surface, like in impact prote…
▽ More
The ability to design and fabricate materials with tailored mechanical properties, combined with immunity to damage, is a frontier of materials engineering. For example, materials which are characterized by elastic properties that depend on the position inside a medium are required in applications where structural stability has to be combined with a soft and compliant surface, like in impact protection and cushioning. A gradient in the elastic properties can be built from a single material, varying gradually the bulk porosity of the material or its geometrical structure. However, if such a gradient is built into the material at production, damage or wearing over time might expose unwanted elastic properties. Here, we implement a design principle for a spatially inhomogeneous material based on topological band-theory for mechanical systems. The resulting inhomogeneity is stable against wearing and even cutting the material in half. We show how, by creating a periodic elastic material with topological properties, one can create an intrinsically polar behavior, where a face with a given surface normal is stiff while its opposing face is soft.
△ Less
Submitted 5 July, 2017;
originally announced July 2017.
-
Inertial amplification of continuous structures: Large band gaps from small masses
Authors:
Niels M. M. Frandsen,
Osama R. Bilal,
Jakob S. Jensen,
Mahmoud I. Hussein
Abstract:
Wave motion in a continuous elastic rod with a periodically attached inertial-amplification mechanism is investigated. The mechanism has properties similar to an "inerter" typically used in vehicle suspensions, however here it is constructed and utilized in a manner that alters the intrinsic properties of a continuous structure. The elastodynamic band structure of the hybrid rod-mechanism structur…
▽ More
Wave motion in a continuous elastic rod with a periodically attached inertial-amplification mechanism is investigated. The mechanism has properties similar to an "inerter" typically used in vehicle suspensions, however here it is constructed and utilized in a manner that alters the intrinsic properties of a continuous structure. The elastodynamic band structure of the hybrid rod-mechanism structure yields band gaps that are exceedingly wide and deep when compared to what can be obtained using standard local resonators, while still being low in frequency. With this concept, a large band gap may be realized with as much as twenty times less added mass compared to what is needed in a standard local resonator configuration. The emerging inertially enhanced continuous structure also exhibits unique qualitative features in its dispersion curves. These include the existence of a characteristic double-peak in the attenuation constant profile within gaps and the possibility of coalescence of two neighbouring gaps creating a large contiguous gap.
△ Less
Submitted 30 December, 2015;
originally announced December 2015.
-
Trampoline metamaterial: Local resonance enhancement by springboards
Authors:
Osama R. Bilal,
Mahmoud I. Hussein
Abstract:
We investigate the dispersion characteristics of locally resonant elastic metamaterials formed by the erection of pillars on the solid regions in a plate patterned by a periodic array of holes. We show that these solid regions effectively act as springboards leading to an enhanced resonance behavior by the pillars when compared to the nominal case of pillars with no holes. This local resonance amp…
▽ More
We investigate the dispersion characteristics of locally resonant elastic metamaterials formed by the erection of pillars on the solid regions in a plate patterned by a periodic array of holes. We show that these solid regions effectively act as springboards leading to an enhanced resonance behavior by the pillars when compared to the nominal case of pillars with no holes. This local resonance amplification phenomenon, which we define as the "trampoline effect", is shown to cause subwavelength band gaps to increase in size by up to a factor of 4. This outcome facilitates the utilization of subwavelength metamaterial properties over exceedingly broad frequency ranges.
△ Less
Submitted 25 July, 2013; v1 submitted 28 May, 2013;
originally announced May 2013.
-
Ultrawide phononic band gap for combined in-plane and out-of-plane waves
Authors:
Osama R. Bilal,
Mahmoud I. Hussein
Abstract:
We consider two-dimensional phononic crystals formed from silicon and voids, and present optimized unit cell designs for (1) out-of-plane, (2) in-plane and (3) combined out-of-plane and in-plane elastic wave propagation. To feasibly search through an excessively large design space (10e40 possible realizations) we develop a specialized genetic algorithm and utilize it in conjunction with the reduce…
▽ More
We consider two-dimensional phononic crystals formed from silicon and voids, and present optimized unit cell designs for (1) out-of-plane, (2) in-plane and (3) combined out-of-plane and in-plane elastic wave propagation. To feasibly search through an excessively large design space (10e40 possible realizations) we develop a specialized genetic algorithm and utilize it in conjunction with the reduced Bloch mode expansion method for fast band structure calculations. Focusing on high symmetry plain-strain square lattices, we report unit cell designs exhibiting record values of normalized band-gap size for all three categories. For the combined polarizations case, we reveal a design with a normalized band-gap size exceeding 60%.
△ Less
Submitted 6 November, 2011;
originally announced November 2011.