-
Asgard/NOTT: L-band nulling interferometry at the VLTI. II. Warm optical design and injection system
Authors:
Germain Garreau,
Azzurra Bigioli,
Romain Laugier,
Gert Raskin,
Johan Morren,
Jean-Philippe Berger,
Colin Dandumont,
Harry-Dean Kenchington Goldsmith,
Simon Gross,
Michael Ireland,
Lucas Labadie,
Jérôme Loicq,
Stephen Madden,
Guillermo Martin,
Marc-Antoine Martinod,
Alexandra Mazzoli,
Ahmed Sanny,
Hancheng Shao,
Kunlun Yan,
Denis Defrère
Abstract:
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakth…
▽ More
Asgard/NOTT (previously Hi-5) is a European Research Council (ERC)-funded project hosted at KU Leuven and a new visitor instrument for the Very Large Telescope Interferometer (VLTI). Its primary goal is to image the snow line region around young stars using nulling interferometry in the L-band (3.5 to 4.0)$μ$m, where the contrast between exoplanets and their host stars is advantageous. The breakthrough is the use of a photonic beam combiner, which only recently allowed the required theoretical raw contrast of $10^{-3}$ in this spectral range. Nulling interferometry observations of exoplanets also require a high degree of balancing between the four pupils of the VLTI in terms of intensity, phase, and polarization. The injection into the beam combiner and the requirements of nulling interferometry are driving the design of the warm optics and the injection system. The optical design up to the beam combiner is presented. It offers a technical solution to efficiently couple the light from the VLTI into the beam combiner. During the coupling, the objective is to limit throughput losses to 5% of the best expected efficiency for the injection. To achieve this, a list of different loss sources is considered with their respective impact on the injection efficiency. Solutions are also proposed to meet the requirements on beam balancing for intensity, phase, and polarization. The different properties of the design are listed, including the optics used, their alignment and tolerances, and their impact on the instrumental performances in terms of throughput and null depth. The performance evaluation gives an expected throughput loss of less than <6.4% of the best efficiency for the injection and a null depth of $\sim2.10^{-3}$, mainly from optical path delay errors outside the scope of this work.
△ Less
Submitted 14 February, 2024;
originally announced February 2024.
-
A dynamical measure of the black hole mass in a quasar 11 billion years ago
Authors:
R. Abuter,
F. Allouche,
A. Amorim,
C. Bailet,
A. Berdeu,
J. -P. Berger,
P. Berio,
A. Bigioli,
O. Boebion,
M. -L. Bolzer,
H. Bonnet,
G. Bourdarot,
P. Bourget,
W. Brandner,
Y. Cao,
R. Conzelmann,
M. Comin,
Y. Clénet,
B. Courtney-Barrer,
R. Davies,
D. Defrère,
A. Delboulbé,
F. Delplancke-Ströbele,
R. Dembet,
J. Dexter
, et al. (102 additional authors not shown)
Abstract:
Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves…
▽ More
Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to probe this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3). Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back time of 11 billion years, by spatially resolving the broad line region. We detect a 40 micro-arcsecond (0.31 pc) spatial offset between the red and blue photocenters of the H$α$ line that traces the velocity gradient of a rotating broad line region. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2x10$^{8}$ solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6x10$^{11}$ solar masses, which indicates an under-massive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the supermassive black hole, indicating a delay between galaxy and black hole formation for some systems.
△ Less
Submitted 25 January, 2024;
originally announced January 2024.
-
2023 Astrophotonics Roadmap: pathways to realizing multi-functional integrated astrophotonic instruments
Authors:
Nemanja Jovanovic,
Pradip Gatkine,
Narsireddy Anugu,
Rodrigo Amezcua-Correa,
Ritoban Basu Thakur,
Charles Beichman,
Chad Bender,
Jean-Philippe Berger,
Azzurra Bigioli,
Joss Bland-Hawthorn,
Guillaume Bourdarot,
Charles M. Bradford,
Ronald Broeke,
Julia Bryant,
Kevin Bundy,
Ross Cheriton,
Nick Cvetojevic,
Momen Diab,
Scott A. Diddams,
Aline N. Dinkelaker,
Jeroen Duis,
Stephen Eikenberry,
Simon Ellis,
Akira Endo,
Donald F. Figer
, et al. (55 additional authors not shown)
Abstract:
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilizatio…
▽ More
Photonics offer numerous functionalities that can be used to realize astrophotonic instruments. The most spectacular example to date is the ESO Gravity instrument at the Very Large Telescope in Chile. Integrated astrophotonic devices stand to offer critical advantages for instrument development, including extreme miniaturization, as well as integration, superior thermal and mechanical stabilization owing to the small footprint, and high replicability offering cost savings. Numerous astrophotonic technologies have been developed to address shortcomings of conventional instruments to date, including for example the development of photonic lanterns, complex aperiodic fiber Bragg gratings, complex beam combiners to enable long baseline interferometry, and laser frequency combs for high precision spectral calibration of spectrometers. Despite these successes, the facility implementation of photonic solutions in astronomical instrumentation is currently limited because of (1) low throughputs from coupling to fibers, coupling fibers to chips, propagation and bend losses, device losses, etc, (2) difficulties with scaling to large channel count devices needed for large bandwidths and high resolutions, and (3) efficient integration of photonics with detectors, to name a few. In this roadmap, we identify 24 areas that need further development. We outline the challenges and advances needed across those areas covering design tools, simulation capabilities, fabrication processes, the need for entirely new components, integration and hybridization and the characterization of devices. To realize these advances the astrophotonics community will have to work cooperatively with industrial partners who have more advanced manufacturing capabilities. With the advances described herein, multi-functional instruments will be realized leading to novel observing capabilities for both ground and space platforms.
△ Less
Submitted 1 November, 2023;
originally announced November 2023.
-
The GRAVITY+ Project: Towards All-sky, Faint-Science, High-Contrast Near-Infrared Interferometry at the VLTI
Authors:
GRAVITY+ Collaboration,
:,
Roberto Abuter,
Patricio Alarcon,
Fatme Allouche,
Antonio Amorim,
Christophe Bailet,
Helen Bedigan,
Anthony Berdeu,
Jean-Philippe Berger,
Philippe Berio,
Azzurra Bigioli,
Richard Blaho,
Olivier Boebion,
Marie-Lena Bolzer,
Henri Bonnet,
Guillaume Bourdarot,
Pierre Bourget,
Wolfgang Brandner,
Cesar Cardenas,
Ralf Conzelmann,
Mauro Comin,
Yann Clénet,
Benjamin Courtney-Barrer,
Yigit Dallilar
, et al. (112 additional authors not shown)
Abstract:
The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the im…
▽ More
The GRAVITY instrument has been revolutionary for near-infrared interferometry by pushing sensitivity and precision to previously unknown limits. With the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) in GRAVITY+, these limits will be pushed even further, with vastly improved sky coverage, as well as faint-science and high-contrast capabilities. This upgrade includes the implementation of wide-field off-axis fringe-tracking, new adaptive optics systems on all Unit Telescopes, and laser guide stars in an upgraded facility. GRAVITY+ will open up the sky to the measurement of black hole masses across cosmic time in hundreds of active galactic nuclei, use the faint stars in the Galactic centre to probe General Relativity, and enable the characterisation of dozens of young exoplanets to study their formation, bearing the promise of another scientific revolution to come at the VLTI.
△ Less
Submitted 19 January, 2023;
originally announced January 2023.
-
High-angular resolution and high-contrast VLTI observations from Y to L band with the Asgard instrumental suite
Authors:
Marc-Antoine Martinod,
Denis Defrère,
Michael Ireland,
Stefan Kraus,
Frantz Martinache,
Peter Tuthill,
Azzurra Bigioli,
Julia Bryant,
Sorabh Chhabra,
Benjamin Courtney-Barrer,
Fred Crous,
Nick Cvetojevic,
Colin Dandumont,
Germain Garreau,
Tiphaine Lagadec,
Romain Laugier,
Daniel Mortimer,
Barnaby Norris,
Gordon Robertson,
Adam Taras
Abstract:
The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: a…
▽ More
The Very Large Telescope Interferometer is one of the most proficient observatories in the world for high angular resolution. Since its first observations, it has hosted several interferometric instruments operating in various bandwidths in the infrared. As a result, the VLTI has yielded countless discoveries and technological breakthroughs. Here, we introduce a new concept for the VLTI, Asgard: an instrumental suite comprised of four natively collaborating instruments: BIFROST, a combiner whose main science case is studying the formation processes and properties of stellar and planetary systems; NOTT, a nulling interferometer dedicated to imaging young nearby planetary systems in the L band; HEIMDALLR, an all-in-one instrument performing both fringe tracking and stellar interferometry with the same optics; Baldr, a Strehl optimiser. These instruments share common goals and technologies. The goals are diverse astrophysical cases such as the study of the formation and evolution processes of binary systems, exoplanetary systems and protoplanetary disks, the characterization of orbital parameters and spin-orbit alignment of multiple systems, the characterization of the exoplanets, and the study of exozodiacal disks. Thus, the idea of this suite is to make the instruments interoperable and complementary to deliver unprecedented sensitivity and accuracy from the J to M bands to meet these goals. The interoperability of the Asgard instruments and their integration in the VLTI are major challenges for this project.
△ Less
Submitted 16 January, 2023;
originally announced January 2023.
-
Asgard/NOTT: L-band nulling interferometry at the VLTI I. Simulating the expected high-contrast performance
Authors:
Romain Laugier,
Denis Defrère,
Benjamin Courtney-Barrer,
Felix A. Dannert,
Alexis Matter,
Colin Dandumont,
Simon Gross,
Olivier Absil,
Azzurra Bigioli,
Germain Garreau,
Lucas Labadie,
Jérôme Loicq,
Marc-Antoine Martinod,
Alexandra Mazzoli,
Gert Raskin,
Ahmed Sanny
Abstract:
Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This moti…
▽ More
Context: NOTT (formerly Hi-5) is a new high-contrast L' band (3.5-4.0 \textmu m) beam combiner for the VLTI with the ambitious goal to be sensitive to young giant exoplanets down to 5 mas separation around nearby stars. The performance of nulling interferometers in these wavelengths is affected both by fundamental noise from the background and by the contributions of instrumental noises. This motivates the development of end-to-end simulations to optimize these instruments. Aims: To enable the performance evaluation and inform the design of such instruments on the current and future infrastructures, taking into account the different sources of noise, and their correlation. Methods: SCIFYsim is an end-to-end simulator for single mode filtered beam combiners, with an emphasis on nulling interferometers. It is used to compute a covariance matrix of the errors. Statistical detection tests based on likelihood ratios are then used to compute compound detection limits for the instrument. Results: With the current assumptions on the performance of the wavefront correction systems, the errors are dominated by correlated instrumental errors down to stars of magnitude 6-7 in the L band, beyond which thermal background from the telescopes and relay system becomes dominant. Conclusions: SCIFYsim is suited to anticipate some of the challenges of design, tuning, operation and signal processing for integrated optics beam combiners. The detection limits found for this early version of NOTT simulation with the unit telescopes are compatible with detections at contrasts up to $10^5$ in the L band at separations of 5 to 80 mas around bright stars.
△ Less
Submitted 17 November, 2022;
originally announced November 2022.
-
Towards a Better Understanding of OPD Limitations for Higher Sensitivity and Contrast at the VLTI
Authors:
Benjamin Courtney-Barrer,
Julien Woillez,
Romain Laugier,
Azzurra Bigioli,
Nicolas Schuhler,
Patricia Guajardo,
Vicente Lizana,
Natalię Behara,
Frank Eisenhauer,
Michael Ireland,
Xavier Haubois,
Denis Defrère
Abstract:
Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast…
▽ More
Precise control of the optical path differences (OPD) in the Very Large Telescope Interferometer (VLTI) was critical for the characterization of the black hole at the center of our Galaxy - leading to the 2020 Nobel prize in physics. There is now significant effort to push these OPD limits even further, in-particular achieving 100nm OPD RMS on the 8m unit telescopes (UT's) to allow higher contrast and sensitivity at the VLTI. This work calculated the theoretical atmospheric OPD limit of the VLTI as 5nm and 15nm RMS, with current levels around 200nm and 100nm RMS for the UT and 1.8m auxillary telescopes (AT's) respectively, when using bright targets in good atmospheric conditions. We find experimental evidence for the $f^{-17/3}$ power law theoretically predicted from the effect of telescope filtering in the case of the ATs which is not currently observed for the UT's. Fitting a series of vibrating mirrors modelled as dampened harmonic oscillators, we were able to model the UT OPD PSD of the gravity fringe tracker to $<1nm/\sqrt{Hz}$ RMSE up to 100Hz, which could adequately explain a hidden $f^{-17/3}$ power law on the UTs. Vibration frequencies in the range of 60-90Hz and also 40-50Hz were found to generally dominate the closed loop OPD residuals of Gravity. Cross correlating accelerometer with Gravity data, it was found that strong contributions in the 40-50Hz range are coming from the M1-M3 mirrors, while a significant portion of power from the 60-100Hz contributions are likely coming from between the M4-M10. From the vibrating mirror model it was shown that achieving sub 100nm OPD RMS for particular baselines (that have OPD$\sim$200nm RMS) required removing nearly all vibration sources below 100Hz.
△ Less
Submitted 17 September, 2022;
originally announced September 2022.
-
L-band nulling interferometry at the VLTI with Asgard/Hi-5: status and plans
Authors:
Denis Defrère,
Azzurra Bigioli,
Colin Dandumont,
Germain Garreau,
Romain Laugier,
Marc-Antoine Martinod,
Olivier Absil,
Jean-Philippe Berger,
Emilie Bouzerand,
Benjamin Courtney-Barrer,
Alexandre Emsenhuber,
Steve Ertel,
Jonathan Gagne,
Adrian M. Glauser,
Simon Gross,
Michael J. Ireland,
Harry-Dean Kenchington,
Jacques Kluska,
Stefan Kraus,
Lucas Labadie,
Viktor Laborde,
Alain Leger,
Jarron Leisenring,
Jérôme Loicq,
Guillermo Martin
, et al. (12 additional authors not shown)
Abstract:
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outp…
▽ More
Hi-5 is the L'-band (3.5-4.0 $μ$m) high-contrast imager of Asgard, an instrument suite in preparation for the visitor focus of the VLTI. The system is optimized for high-contrast and high-sensitivity imaging within the diffraction limit of a single UT/AT telescope. It is designed as a double-Bracewell nulling instrument producing spectrally-dispersed (R=20, 400, or 2000) complementary nulling outputs and simultaneous photometric outputs for self-calibration purposes. In this paper, we present an update of the project with a particular focus on the overall architecture, opto-mechanical design of the warm and cold optics, injection system, and development of the photonic beam combiner. The key science projects are to survey (i) nearby young planetary systems near the snow line, where most giant planets are expected to be formed, and (ii) nearby main sequence stars near the habitable zone where exozodiacal dust that may hinder the detection of Earth-like planets. We present an update of the expected instrumental performance based on full end-to-end simulations using the new GRAVITY+ specifications of the VLTI and the latest planet formation models.
△ Less
Submitted 18 August, 2022;
originally announced August 2022.
-
First Light for GRAVITY Wide: Large Separation Fringe Tracking for the Very Large Telescope Interferometer
Authors:
GRAVITY+ Collaboration,
:,
R. Abuter,
F. Allouche,
A. Amorim,
C. Bailet,
M. Bauböck,
J. -P. Berger,
P. Berio,
A. Bigioli,
O. Boebion,
M. L. Bolzer,
H. Bonnet,
G. Bourdarot,
P. Bourget,
W. Brandner,
Y. Clénet,
B. Courtney-Barrer,
Y. Dallilar,
R. Davies,
D. Defrère,
A. Delboulbé,
F. Delplancke,
R. Dembet,
P. T. de Zeeuw
, et al. (92 additional authors not shown)
Abstract:
GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines t…
▽ More
GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines the dual-beam capabilities of the VLTI and the GRAVITY instrument to increase the maximum separation between the science target and the reference star from 2 arcseconds with the 8 m UTs up to several 10 arcseconds, limited only by the Earth's turbulent atmosphere. This increases the sky-coverage of GRAVITY by two orders of magnitude, opening up milliarcsecond resolution observations of faint objects, and in particular the extragalactic sky. The first observations in 2019 - 2022 include first infrared interferometry of two redshift $z\sim2$ quasars, interferometric imaging on the binary system HD 105913A, and repeated observations of multiple star systems in the Orion Trapezium Cluster. We find the coherence loss between the science object and fringe-tracking reference star well described by the turbulence of the Earth's atmosphere. We confirm that the larger apertures of the UTs result in higher visibilities for a given separation due to larger overlap of the projected pupils on sky and give predictions for visibility loss as a function of separation to be used for future planning.
△ Less
Submitted 23 August, 2022; v1 submitted 1 June, 2022;
originally announced June 2022.
-
Long-wavelength infrared photovoltaic heterodyne receivers using patch-antenna quantum cascade detectors
Authors:
Azzurra Bigioli,
Giovanni Armaroli,
Angela Vasanelli,
Djamal Gacemi,
Yanko Todorov,
Daniele Palaferri,
Lianhe Li,
Alexander Giles Davies,
Edmund Linfield,
Carlo Sirtori
Abstract:
Quantum cascade detectors (QCD) are unipolar infrared devices where the transport of the photo excited carriers takes place through confined electronic states, without an applied bias. In this photovoltaic mode, the detector's noise is not dominated by a dark shot noise process, therefore, performances are less degraded at high temperature with respect to photoconductive detectors. This work descr…
▽ More
Quantum cascade detectors (QCD) are unipolar infrared devices where the transport of the photo excited carriers takes place through confined electronic states, without an applied bias. In this photovoltaic mode, the detector's noise is not dominated by a dark shot noise process, therefore, performances are less degraded at high temperature with respect to photoconductive detectors. This work describes a 9 um QCD embedded into a patch-antenna metamaterial which operates with state-of-the-art performances. The metamaterial gathers photons on a collection area, Acoll, much bigger than the geometrical area of the detector, improving the signal to noise ratio up to room temperature. The background-limited detectivity at 83 K is 5.5 x 10^10 cm Hz^1/2 W^-1, while at room temperature, the responsivity is 50 mA/W at 0 V bias. Patch antenna QCD is an ideal receiver for a heterodyne detection set-up, where a signal at a frequency 1.4 GHz and T=295 K is reported as first demonstration of uncooled 9um photovoltaic receivers with GHz electrical bandwidth. These findings guide the research towards uncooled IR quantum limited detection.
△ Less
Submitted 24 March, 2020;
originally announced March 2020.
-
Mixing properties of room temperature patch-antenna receivers in a mid-infrared (9um) heterodyne system
Authors:
A. Bigioli,
D. Gacemi,
D. Palaferri,
Y. Todorov,
A. Vasanelli,
S. Suffit,
L. Li,
A. G. Davies,
E. H. Linfield,
F. Kapsalidis,
M. Beck,
J. Faist,
C. Sirtori
Abstract:
A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear respon…
▽ More
A room-temperature mid-infrared (9 um) heterodyne system based on high-performance unipolar optoelectronic devices is presented. The local oscillator (LO) is a quantum cascade laser, while the receiver is an antenna coupled quantum well infrared photodetector optimized to operate in a microcavity configuration. Measurements of the saturation intensity show that these receivers have a linear response up to very high optical power, an essential feature for heterodyne detection. By an accurate passive stabilization of the local oscillator and minimizing the optical feed-back the system reaches, at room temperature, a record value of noise equivalent power of 30 pW at 9um. Finally, it is demonstrated that the injection of microwave signal into our receivers shifts the heterodyne beating over the bandwidth of the devices. This mixing property is a unique valuable function of these devices for signal treatment.
△ Less
Submitted 11 July, 2019;
originally announced July 2019.
-
Room temperature 9 $μ$m photodetectors and GHz heterodyne receivers
Authors:
Daniele Palaferri,
Yanko Todorov,
Azzurra Bigioli,
Alireza Mottaghizadeh,
Djamal Gacemi,
Allegra Calabrese,
Angela Vasanelli,
Lianhe Li,
A. Giles Davies,
Edmund H. Linfield,
Filippos Kapsalidis,
Mattias Beck,
Jérôme Faist,
Carlo Sirtori
Abstract:
Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature…
▽ More
Room temperature operation is mandatory for any optoelectronics technology which aims to provide low-cost compact systems for widespread applications. In recent years, an important technological effort in this direction has been made in bolometric detection for thermal imaging$^1$, which has delivered relatively high sensitivity and video rate performance ($\sim$ 60 Hz). However, room temperature operation is still beyond reach for semiconductor photodetectors in the 8-12 $μ$m wavelength band$^2$, and all developments for applications such as imaging, environmental remote sensing and laser-based free-space communication$^{3-5}$ have therefore had to be realised at low temperatures. For these devices, high sensitivity and high speed have never been compatible with high temperature operation$^{6, 7}$. Here, we show that a 9 $μ$m quantum well infrared photodetector$^8$, implemented in a metamaterial made of subwavelength metallic resonators$^{9-12}$, has strongly enhanced performances up to room temperature. This occurs because the photonic collection area is increased with respect to the electrical area for each resonator, thus significantly reducing the dark current of the device$^{13}$. Furthermore, we show that our photonic architecture overcomes intrinsic limitations of the material, such as the drop of the electronic drift velocity with temperature$^{14, 15}$, which constrains conventional geometries at cryogenic operation$^6$. Finally, the reduced physical area of the device and its increased responsivity allows us, for the first time, to take advantage of the intrinsic high frequency response of the quantum detector$^7$ at room temperature. By beating two quantum cascade lasers$^{16}$ we have measured the heterodyne signal at high frequencies up to 4 GHz.
△ Less
Submitted 6 September, 2017;
originally announced September 2017.
