-
First numerical analysis of runaway electron generation in tungsten-rich plasmas towards ITER
Authors:
J. Walkowiak,
M. Hoppe,
I. Ekmark,
A. Jardin,
J. Bielecki,
K. Król,
Y. Savoye-Peysson,
D. Mazon,
D. Dworak,
M. Scholz
Abstract:
The disruption and runaway electron analysis model code was extended to include tungsten impurities in disruption simulations with the aim of studying the runaway electron (RE) generation. This study investigates RE current sensitivity on the following plasma parameters and modelling choices: tungsten concentration, magnetic perturbation strength, electron modelling, thermal quench time and tokama…
▽ More
The disruption and runaway electron analysis model code was extended to include tungsten impurities in disruption simulations with the aim of studying the runaway electron (RE) generation. This study investigates RE current sensitivity on the following plasma parameters and modelling choices: tungsten concentration, magnetic perturbation strength, electron modelling, thermal quench time and tokamak geometry: ITER-like or ASDEX-like. Our investigation shows that a tungsten concentration below 10-3 does not cause significant RE generation on its own. However, at higher concentrations it is possible to reach a very high RE current. Out of the two tested models of electrons in plasma: fluid and isotropic (kinetic), results from the fluid model are more conservative, which is useful when it comes to safety analysis. However, these results are overly pessimistic when compared to the isotropic model, which is based on a more reliable approach. Our results also show that the hot-tail RE generation mechanism is dominant as a primary source of RE in tungsten induced disruptions, usually providing orders of magnitude higher RE seed than Dreicer generation. We discuss best practices for simulations with tungsten-rich plasma, present the dependence of the safety limits on modelling choices and highlight the biggest shortcoming of the current simulation techniques. The obtained results pave the way for a wider analysis of tungsten impact on the disruption dynamics, including the mitigation techniques for ITER in the case of strong contamination of the plasma with tungsten.
△ Less
Submitted 23 April, 2024;
originally announced April 2024.
-
Resolving non-equilibrium shape variations amongst millions of gold nanoparticles
Authors:
Zhou Shen,
Salah Awel,
Anton Barty,
Richard Bean,
Johan Bielecki,
Martin Bergemann,
Benedikt J. Daurer,
Tomas Ekeberg,
Armando D. Estillore,
Hans Fangohr,
Klaus Giewekemeyer,
Mark S. Hunter,
Mikhail Karnevskiy,
Richard A. Kirian,
Henry Kirkwood,
Yoonhee Kim,
Jayanath Koliyadu,
Holger Lange,
Romain Letrun,
Jannik Lübke,
Abhishek Mall,
Thomas Michelat,
Andrew J. Morgan,
Nils Roth,
Amit K. Samanta
, et al. (14 additional authors not shown)
Abstract:
Nanoparticles, exhibiting functionally relevant structural heterogeneity, are at the forefront of cutting-edge research. Now, high-throughput single-particle imaging (SPI) with x-ray free-electron lasers (XFELs) creates unprecedented opportunities for recovering the shape distributions of millions of particles that exhibit functionally relevant structural heterogeneity. To realize this potential,…
▽ More
Nanoparticles, exhibiting functionally relevant structural heterogeneity, are at the forefront of cutting-edge research. Now, high-throughput single-particle imaging (SPI) with x-ray free-electron lasers (XFELs) creates unprecedented opportunities for recovering the shape distributions of millions of particles that exhibit functionally relevant structural heterogeneity. To realize this potential, three challenges have to be overcome: (1) simultaneous parametrization of structural variability in real and reciprocal spaces; (2) efficiently inferring the latent parameters of each SPI measurement; (3) scaling up comparisons between $10^5$ structural models and $10^6$ XFEL-SPI measurements. Here, we describe how we overcame these three challenges to resolve the non-equilibrium shape distributions within millions of gold nanoparticles imaged at the European XFEL. These shape distributions allowed us to quantify the degree of asymmetry in these particles, discover a relatively stable `shape envelope' amongst nanoparticles, discern finite-size effects related to shape-controlling surfactants, and extrapolate nanoparticles' shapes to their idealized thermodynamic limit. Ultimately, these demonstrations show that XFEL SPI can help transform nanoparticle shape characterization from anecdotally interesting to statistically meaningful.
△ Less
Submitted 9 January, 2024;
originally announced January 2024.
-
3D atomic structure from a single XFEL pulse
Authors:
G. Bortel,
M. Tegze,
M. Sikorski,
R. Bean,
J. Bielecki,
C. Kim,
J. Koliyadu,
F. Koua,
M. Ramilli,
A. Round,
T. Sato,
D. Zabelskii,
G. Faigel
Abstract:
X-ray Free Electron Lasers (XFEL) are the most advanced pulsed x-ray sources. Their extraordinary pulse parameters promise unique applications. Indeed, several new methods have been developed at XFEL-s. However, no methods are known, which would allow ab initio atomic level structure determination using only a single XFEL pulse. Here, we present experimental results, demonstrating the determinatio…
▽ More
X-ray Free Electron Lasers (XFEL) are the most advanced pulsed x-ray sources. Their extraordinary pulse parameters promise unique applications. Indeed, several new methods have been developed at XFEL-s. However, no methods are known, which would allow ab initio atomic level structure determination using only a single XFEL pulse. Here, we present experimental results, demonstrating the determination of the 3D atomic structure from data obtained during a single 25 fs XFEL pulse. Parallel measurement of hundreds of Bragg reflections was done by collecting Kossel line patterns of GaAs and GaP. With these measurements, we reached the ultimate temporal limit of the x-ray structure solution possible today. These measurements open the way for studying non-repeatable fast processes and structural transformations in crystals for example measuring the atomic structure of matter at extremely non-ambient conditions or transient structures formed in irreversible physical, chemical, or biological processes. It would also facilitate time resolved pump-probe structural studies making them significantly shorter than traditional serial crystallography.
△ Less
Submitted 27 October, 2023;
originally announced October 2023.
-
Helium-Electrospray: an improved sample delivery system for single-particle imaging with X-ray lasers
Authors:
Tej Varma Yenupuri,
Safi Rafie-Zinedine,
Lena Worbs,
Michael Heymann,
Joachim Schulz,
Johan Bielecki,
Filipe R. N. C. Maia
Abstract:
Imaging the structure and observing the dynamics of isolated proteins using single-particle X-ray diffractive imaging (SPI) is one of the potential applications of X-ray free-electron lasers (XFELs). Currently, SPI experiments on isolated proteins are limited by three factors: low signal strength, limited data and high background from gas scattering. The last two factors are largely due to the sho…
▽ More
Imaging the structure and observing the dynamics of isolated proteins using single-particle X-ray diffractive imaging (SPI) is one of the potential applications of X-ray free-electron lasers (XFELs). Currently, SPI experiments on isolated proteins are limited by three factors: low signal strength, limited data and high background from gas scattering. The last two factors are largely due to the shortcomings of the aerosol sample delivery methods in use. Here we present our modified electrospray ionization (ESI) source, which we dubbed Helium-ESI (He-ESI). With it, we increased particle delivery into the interaction region by a factor of 10, for 26 nm-sized biological particles, and decreased the gas load in the interaction chamber corresponding to an 80% reduction in gas scattering when compared to the original ESI. These improvements will lead to a significant increase in the quality and quantity of SPI diffraction patterns in future experiments using He-ESI, resulting in higher-resolution structures.
△ Less
Submitted 25 September, 2023;
originally announced September 2023.
-
3D-Printed Sheet Jet for Stable Megahertz Liquid Sample Delivery at X-ray Free Electron Lasers
Authors:
Patrick E. Konold,
Tong You,
Johan Bielecki,
Joana Valerio,
Marco Kloos,
Daniel Westphal,
Alfredo Bellisario,
Tej Varma,
August Wolter,
Jayanath C. P. Koliyadu,
Faisal H. M. Koua,
Romain Letrun,
Adam Round,
Tokushi Sato,
Petra Mésźaros,
Leonardo Monrroy,
Jennifer Mutisya,
Szabolcs Bódizs,
Taru Larkiala,
Amke Nimmrich,
Roberto Alvarez,
Richard Bean,
Tomas Ekeberg,
Richard A. Kirian,
Sebastian Westenhoff
, et al. (1 additional authors not shown)
Abstract:
X-ray Free Electron Lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit is the delivery of samples to the X-ray interaction point in a way that produces data of the highest possible quality and efficiency. This is hampered by constraints posed by the light source and operation within a b…
▽ More
X-ray Free Electron Lasers (XFELs) can probe chemical and biological reactions as they unfold with unprecedented spatial and temporal resolution. A principal challenge in this pursuit is the delivery of samples to the X-ray interaction point in a way that produces data of the highest possible quality and efficiency. This is hampered by constraints posed by the light source and operation within a beamline environment. For liquid samples, the solution typically involves a high-speed liquid jet, capable of kee** up with the rate of X-ray pulses. However, conventional jets are not ideal because of radiation-induced explosions of the jet, as well as their cylindrical geometry combined with the X-ray pointing instability of many beamlines causes the interaction volume to differ for every pulse. This complicates data analysis and contributes to measurement errors. An alternative geometry is a liquid sheet jet which, with its constant thickness over large areas, eliminates the X-ray pointing related problems. Since liquid sheets can be made very thin, the radiation-induced explosion is reduced, boosting their stability. They are especially attractive for experiments which benefit from small interaction volumes such as fluctuation X-ray scattering and several types of spectroscopy. Although they have seen increasing use for soft X-ray applications in recent years, there has not yet been wide-scale adoption at XFELs. Here, we demonstrate liquid sheet jet sample injection at the European XFEL. We evaluate several aspects of its performance relative to a conventional liquid jet including thickness profile, stability, and radiation-induced explosion dynamics at high repetition rates. The sheet jet exhibits superior performance across these critical experimental parameters. Its minute thickness also suggests ultrafast single-particle solution scattering is a possibility.
△ Less
Submitted 13 June, 2023;
originally announced June 2023.
-
Unsupervised learning approaches to characterize heterogeneous samples using X-ray single particle imaging
Authors:
Yulong Zhuang,
Salah Awel,
Anton Barty,
Richard Bean,
Johan Bielecki,
Martin Bergemann,
Benedikt J. Daurer,
Tomas Ekeberg,
Armando D. Estillore,
Hans Fangohr,
Klaus Giewekemeyer,
Mark S. Hunter,
Mikhail Karnevskiy,
Richard A. Kirian,
Henry Kirkwood,
Yoonhee Kim,
Jayanath Koliyadu,
Holger Lange,
Romain Letrun,
Jannik Lübke,
Abhishek Mall,
Thomas Michelat,
Andrew J. Morgan,
Nils Roth,
Amit K. Samanta
, et al. (17 additional authors not shown)
Abstract:
One of the outstanding analytical problems in X-ray single particle imaging (SPI) is the classification of structural heterogeneity, which is especially difficult given the low signal-to-noise ratios of individual patterns and that even identical objects can yield patterns that vary greatly when orientation is taken into consideration. We propose two methods which explicitly account for this orien…
▽ More
One of the outstanding analytical problems in X-ray single particle imaging (SPI) is the classification of structural heterogeneity, which is especially difficult given the low signal-to-noise ratios of individual patterns and that even identical objects can yield patterns that vary greatly when orientation is taken into consideration. We propose two methods which explicitly account for this orientation-induced variation and can robustly determine the structural landscape of a sample ensemble. The first, termed common-line principal component analysis (PCA) provides a rough classification which is essentially parameter-free and can be run automatically on any SPI dataset. The second method, utilizing variation auto-encoders (VAEs) can generate 3D structures of the objects at any point in the structural landscape. We implement both these methods in combination with the noise-tolerant expand-maximize-compress (EMC) algorithm and demonstrate its utility by applying it to an experimental dataset from gold nanoparticles with only a few thousand photons per pattern and recover both discrete structural classes as well as continuous deformations. These developments diverge from previous approaches of extracting reproducible subsets of patterns from a dataset and open up the possibility to move beyond studying homogeneous sample sets and study open questions on topics such as nanocrystal growth and dynamics as well as phase transitions which have not been externally triggered.
△ Less
Submitted 13 September, 2021;
originally announced September 2021.
-
Ptychographic wavefront characterisation for single-particle imaging at X-ray lasers
Authors:
Benedikt J. Daurer,
Simone Sala,
Max F. Hantke,
Hemanth K. N. Reddy,
Johan Bielecki,
Zhou Shen,
Carl Nettleblad,
Martin Svenda,
Tomas Ekeberg,
Gabriella A. Carini,
Philip Hart,
Timur Osipov,
Andrew Aquila,
N. Duane Loh,
Filipe R. N. C. Maia,
Pierre Thibault
Abstract:
A well-characterised wavefront is important for many X-ray free-electron laser (XFEL) experiments, especially for single-particle imaging (SPI), where individual bio-molecules randomly sample a nanometer-region of highly-focused femtosecond pulses. We demonstrate high-resolution multiple-plane wavefront imaging of an ensemble of XFEL pulses, focused by Kirkpatrick-Baez (KB) mirrors, based on mixed…
▽ More
A well-characterised wavefront is important for many X-ray free-electron laser (XFEL) experiments, especially for single-particle imaging (SPI), where individual bio-molecules randomly sample a nanometer-region of highly-focused femtosecond pulses. We demonstrate high-resolution multiple-plane wavefront imaging of an ensemble of XFEL pulses, focused by Kirkpatrick-Baez (KB) mirrors, based on mixed-state ptychography, an approach letting us infer and reduce experimental sources of instability. From the recovered wavefront profiles, we show that while local photon fluence correction is crucial and possible for SPI, a small diversity of phase-tilts likely has no impact. Our detailed characterisation will aid interpretation of data from past and future SPI experiments, and provides a basis for further improvements to experimental design and reconstruction algorithms.
△ Less
Submitted 26 December, 2020;
originally announced December 2020.
-
3D diffractive imaging of nanoparticle ensembles using an X-ray laser
Authors:
Kartik Ayyer,
P. Lourdu Xavier,
Johan Bielecki,
Zhou Shen,
Benedikt J. Daurer,
Amit K. Samanta,
Salah Awel,
Richard Bean,
Anton Barty,
Tomas Ekeberg,
Armando D. Estillore,
Klaus Giewekemeyer,
Mark S. Hunter,
Richard A. Kirian,
Henry Kirkwood,
Yoonhee Kim,
Jayanath Koliyadu,
Holger Lange,
Romain Letruin,
Jannik Lübke,
Andrew J. Morgan,
Nils Roth,
Tokushi Sato,
Marcin Sikorski,
Florian Schulz
, et al. (12 additional authors not shown)
Abstract:
We report the 3D structure determination of gold nanoparticles (AuNPs) by X-ray single particle imaging (SPI). Around 10 million diffraction patterns from gold nanoparticles were measured in less than 100 hours of beam time, more than 100 times the amount of data in any single prior SPI experiment, using the new capabilities of the European X-ray free electron laser which allow measurements of 150…
▽ More
We report the 3D structure determination of gold nanoparticles (AuNPs) by X-ray single particle imaging (SPI). Around 10 million diffraction patterns from gold nanoparticles were measured in less than 100 hours of beam time, more than 100 times the amount of data in any single prior SPI experiment, using the new capabilities of the European X-ray free electron laser which allow measurements of 1500 frames per second. A classification and structural sorting method was developed to disentangle the heterogeneity of the particles and to obtain a resolution of better than 3 nm. With these new experimental and analytical developments, we have entered a new era for the SPI method and the path towards close-to-atomic resolution imaging of biomolecules is apparent.
△ Less
Submitted 17 July, 2020;
originally announced July 2020.
-
Time-resolved XUV Opacity Measurements of Warm-Dense Aluminium
Authors:
S. M. Vinko,
V. Vozda,
J. Andreasson,
S. Bajt,
J. Bielecki,
T. Burian,
J. Chalupsky,
O. Ciricosta,
M. P. Desjarlais,
H. Fleckenstein,
J. Hajdu,
V. Hajkova,
P. Hollebon,
L. Juha,
M. F. Kasim,
E. E. McBride,
K. Muehlig,
T. R. Preston,
D. S. Rackstraw,
S. Roling,
S. Toleikis,
J. S. Wark,
H. Zacharias
Abstract:
The free-free opacity in plasmas is fundamental to our understanding of energy transport in stellar interiors and for inertial confinement fusion research. However, theoretical predictions in the challenging dense plasma regime are conflicting and there is a dearth of accurate experimental data to allow for direct model validation. Here we present time-resolved transmission measurements in solid-d…
▽ More
The free-free opacity in plasmas is fundamental to our understanding of energy transport in stellar interiors and for inertial confinement fusion research. However, theoretical predictions in the challenging dense plasma regime are conflicting and there is a dearth of accurate experimental data to allow for direct model validation. Here we present time-resolved transmission measurements in solid-density Al heated by an XUV free-electron laser. We use a novel functional optimization approach to extract the temperature-dependent absorption coefficient directly from an oversampled pool of single-shot measurements, and find a pronounced enhancement of the opacity as the plasma is heated to temperatures of order the Fermi energy. Plasma heating and opacity-enhancement is observed on ultrafast time scales, within the duration of the femtosecond XUV pulse. We attribute further rises in the opacity on ps timescales to melt and the formation of warm-dense matter.
△ Less
Submitted 18 January, 2020;
originally announced January 2020.
-
Megahertz single-particle imaging at the European XFEL
Authors:
Egor Sobolev,
Serguey Zolotarev,
Klaus Giewekemeyer,
Johan Bielecki,
Kenta Okamoto,
Hemanth K. N. Reddy,
Jakob Andreasson,
Kartik Ayyer,
Imrich Barak,
Sadia Bari,
Anton Barty,
Richard Bean,
Sergey Bobkov,
Henry N. Chapman,
Grzegorz Chojnowski,
Benedikt J. Daurer,
Katerina Dörner,
Tomas Ekeberg,
Leonie Flückiger,
Oxana Galzitskaya,
Luca Gelisio,
Steffen Hauf,
Brenda G. Hogue,
Daniel A. Horke,
Ahmad Hosseinizadeh
, et al. (38 additional authors not shown)
Abstract:
The emergence of high repetition-rate X-ray free-electron lasers (XFELs) powered by superconducting accelerator technology enables the measurement of significantly more experimental data per day than was previously possible. The European XFEL will soon provide 27,000 pulses per second, more than two orders of magnitude more than any other XFEL. The increased pulse rate is a key enabling factor for…
▽ More
The emergence of high repetition-rate X-ray free-electron lasers (XFELs) powered by superconducting accelerator technology enables the measurement of significantly more experimental data per day than was previously possible. The European XFEL will soon provide 27,000 pulses per second, more than two orders of magnitude more than any other XFEL. The increased pulse rate is a key enabling factor for single-particle X-ray diffractive imaging, which relies on averaging the weak diffraction signal from single biological particles. Taking full advantage of this new capability requires that all experimental steps, from sample preparation and delivery to the acquisition of diffraction patterns, are compatible with the increased pulse repetition rate. Here, we show that single-particle imaging can be performed using X-ray pulses at megahertz repetition rates. The obtained results pave the way towards exploiting high repetition-rate X-ray free-electron lasers for single-particle imaging at their full repetition rate.
△ Less
Submitted 14 December, 2019;
originally announced December 2019.
-
Femtosecond X-ray Fourier holography imaging of free-flying nanoparticles
Authors:
Tais Gorkhover,
Anatoli Ulmer,
Ken Ferguson,
Max Bucher,
Filipe Maia,
Johan Bielecki,
Tomas Ekeberg,
Max F. Hantke,
Benedikt J. Daurer,
Carl Nettelblad,
Jakob Andreasson,
Anton Barty,
Petr Bruza,
Sebastian Carron,
Dirk Hasse,
Jacek Krzywinski,
Daniel S. D. Larsson,
Andrew Morgan,
Kerstin Muehlig,
Maria Mueller,
Kenta Okamoto,
Alberto Pietrini,
Daniela Rupp,
Mario Sauppe,
Gijs van der Schot
, et al. (13 additional authors not shown)
Abstract:
Ultrafast X-ray imaging provides high resolution information on individual fragile specimens such as aerosols, metastable particles, superfluid quantum systems and live biospecimen, which is inaccessible with conventional imaging techniques. Coherent X-ray diffractive imaging, however, suffers from intrinsic loss of phase, and therefore structure recovery is often complicated and not always unique…
▽ More
Ultrafast X-ray imaging provides high resolution information on individual fragile specimens such as aerosols, metastable particles, superfluid quantum systems and live biospecimen, which is inaccessible with conventional imaging techniques. Coherent X-ray diffractive imaging, however, suffers from intrinsic loss of phase, and therefore structure recovery is often complicated and not always uniquely-defined. Here, we introduce the method of in-flight holography, where we use nanoclusters as reference X-ray scatterers in order to encode relative phase information into diffraction patterns of a virus. The resulting hologram contains an unambiguous three-dimensional map of a virus and two nanoclusters with the highest lat- eral resolution so far achieved via single shot X-ray holography. Our approach unlocks the benefits of holography for ultrafast X-ray imaging of nanoscale, non-periodic systems and paves the way to direct observation of complex electron dynamics down to the attosecond time scale.
△ Less
Submitted 9 August, 2017; v1 submitted 28 July, 2017;
originally announced July 2017.
-
Structure and dehydration mechanism of the proton conducting oxide Ba$_{2}$In$_{2}$O$_{5}$(H$_{2}$O)$_{x}$
Authors:
J. Bielecki,
S. F. Parker,
L. Borjesson,
M. Karlsson
Abstract:
The structure and dehydration mechanism of the proton conducting oxide Ba$_{2}$In$_{2}$O$_{5}$(H$_{2}$O)$_{x}$ are investigated by means of variable temperature Raman spectroscopy together with inelastic neutron scattering. At room temperature, Ba$_{2}$In$_{2}$O$_{5}$(H$_{2}$O)$_{x}$ is found to be fully hydrated ($x=1$) and to have a perovskite-like structure, which dehydrates gradually with incr…
▽ More
The structure and dehydration mechanism of the proton conducting oxide Ba$_{2}$In$_{2}$O$_{5}$(H$_{2}$O)$_{x}$ are investigated by means of variable temperature Raman spectroscopy together with inelastic neutron scattering. At room temperature, Ba$_{2}$In$_{2}$O$_{5}$(H$_{2}$O)$_{x}$ is found to be fully hydrated ($x=1$) and to have a perovskite-like structure, which dehydrates gradually with increasing temperature and at around 600 $^{\circ}$C the material is essentially completely dehydrated ($x=0$). The dehydrated material exhibits a brownmillerite structure, which is featured by alternating layers of InO$_{6}$ octahedra and InO$_{4}$ tetrahedra. The transition from a perovskite-like to a brownmillerite-like structure is featured by a hydrated-to-intermediate phase transition at $ca.$ 370 °C. The structure of the intermediate phase is similar to the structure of the fully dehydrated material, but with the difference that it exhibits a non-centrosymmetric distortion of the InO$_{6}$ octahedra not present in the latter. For temperatures below the hydrated-to-intermediate phase transition, dehydration is featured by the release of protons confined to the layers of InO$_{4}$ tetrahedra, whereas above the transition also protons bound to oxygens of the layers of InO$_{6}$ are released. Finally, we found that the O-H stretch region of the vibrational spectra is not consistent with a single-phase spectrum, but is in agreement with the superposition of spectra associated with two different proton configurations. The relative contributions of the two proton configurations depend on how the sample is hydrated.
△ Less
Submitted 26 July, 2015; v1 submitted 8 April, 2014;
originally announced April 2014.
-
Short-Range Structure and Phonon Assignment of the Brownmillerite-Type Oxide Ba$_{2}$In$_{2}$O$_{5}$ and its Hydrated Proton-Conducting Form BaInO$_{3}$H
Authors:
Johan Bielecki,
Stewart F. Parker,
Dharshani Ekanayake,
Seikh M. H. Rahman,
Lars Börjesson,
Maths Karlsson
Abstract:
The vibrational spectra and short-range structure of the brownmillerite-type oxide Ba$_{2}$In$_{2}$O$_{5}$ and its hydrated form BaInO$_{3}$H, are investigated by means of Raman, infrared, and inelastic neutron scattering spectroscopies together with density functional theory calculations. For Ba$_{2}$In$_{2}$O$_{5}$, which may be described as an oxygen deficient perovskite structure with alternat…
▽ More
The vibrational spectra and short-range structure of the brownmillerite-type oxide Ba$_{2}$In$_{2}$O$_{5}$ and its hydrated form BaInO$_{3}$H, are investigated by means of Raman, infrared, and inelastic neutron scattering spectroscopies together with density functional theory calculations. For Ba$_{2}$In$_{2}$O$_{5}$, which may be described as an oxygen deficient perovskite structure with alternating layers of InO$_{6}$ octahedra and InO$_{4}$ tetrahedra, the results affirm a short-range structure of $Icmm$ symmetry, which is characterized by random orientation of successive layers of InO$_{4}$ tetrahedra. For the hydrated, proton conducting, form, BaInO$_{3}$H, the results suggest that the short-range structure is more complicated than the $P4/mbm$ symmetry that has been proposed previously on the basis of neutron diffraction, but rather suggest a proton configuration close to the lowest energy structure predicted by Martinez et al. [J.-R. Martinez, C. E. Moen, S. Stoelen, N. L. Allan, J. of Solid State Chem. 180, 3388, (2007)]. An intense Raman active vibration at 150 cm$^{-1}$ is identified as a unique fingerprint of this proton configuration.
△ Less
Submitted 29 July, 2015; v1 submitted 3 April, 2014;
originally announced April 2014.
-
Two Component Heat Diffusion Observed in CMR Manganites
Authors:
J. Bielecki,
R. Rauer,
E. Zanghellini,
R. Gunnarsson,
K. Dörr,
L. Börjesson
Abstract:
We investigate the low-temperature electron, lattice, and spin dynamics of LaMnO_3 (LMO) and La_0.7Ca_0.3MnO_3 (LCMO) by resonant pump-probe reflectance spectroscopy. Probing the high-spin d-d transition as a function of time delay and probe energy, we compare the responses of the Mott insulator and the double-exchange metal to the photoexcitation. Attempts have previously been made to describe…
▽ More
We investigate the low-temperature electron, lattice, and spin dynamics of LaMnO_3 (LMO) and La_0.7Ca_0.3MnO_3 (LCMO) by resonant pump-probe reflectance spectroscopy. Probing the high-spin d-d transition as a function of time delay and probe energy, we compare the responses of the Mott insulator and the double-exchange metal to the photoexcitation. Attempts have previously been made to describe the sub-picosecond dynamics of CMR manganites in terms of a phenomenological three temperature model describing the energy transfer between the electron, lattice and spin subsystems followed by a comparatively slow exponential decay back to the ground state. However, conflicting results have been reported. Here we first show clear evidence of an additional component in the long term relaxation due to film-to-substrate heat diffusion and then develop a modified three temperature model that gives a consistent account for this feature. We confirm our interpretation by using it to deduce the bandgap in LMO. In addition we also model the non-thermal sub-picosecond dynamics, giving a full account of all observed transient features both in the insulating LMO and the metallic LCMO.
△ Less
Submitted 26 February, 2010; v1 submitted 25 February, 2010;
originally announced February 2010.
-
Anharmonic softening of Raman active phonons in Iron-Pnictides; estimating the Fe isotope effect due to anharmonic expansion
Authors:
M. Granath,
J. Bielecki,
J. Holmlund,
L. Borjesson
Abstract:
We present Raman measurements on the iron-pnictide superconductors CeFeAsO_{1-x}F_{x} and NdFeAsO{1-x}F_{x}. Modeling the Fe-As plane in terms of harmonic and a cubic anharmonic Fe-As interaction we calculate the temperature dependence of the energy and lifetime of the Raman active Fe B_{1g} mode and fit to the observed energy shift. The shifts and lifetimes are in good agreement with those meas…
▽ More
We present Raman measurements on the iron-pnictide superconductors CeFeAsO_{1-x}F_{x} and NdFeAsO{1-x}F_{x}. Modeling the Fe-As plane in terms of harmonic and a cubic anharmonic Fe-As interaction we calculate the temperature dependence of the energy and lifetime of the Raman active Fe B_{1g} mode and fit to the observed energy shift. The shifts and lifetimes are in good agreement with those measured also in other Raman studies which demonstrate that the phonon spectrum is well represented by phonon-phonon interactions without any significant electronic contribution. We also estimate the anharmonic expansion from Fe (56->54) isotope substitution to Δa=5.1 10^{-4}Åand Δd_{Fe-As}= 2.510^{-4}Åand the shift of harmonic zero point fluctuations of bond lengths <Δx^2><=3 10^{-5}Å^2, giving a total relative average decrease of electronic hop** integrals of |δt|/t<= 2.0 10^{-4}. The results poses a serious challenge for any theory of superconductivity in the pnictides that does not include electron-phonon interactions to produce a sizable Fe-isotope effect.
△ Less
Submitted 4 June, 2009; v1 submitted 3 February, 2009;
originally announced February 2009.
-
U-Duality and the Compactified Gauss-Bonnet Term
Authors:
Ling Bao,
Johan Bielecki,
Martin Cederwall,
Bengt E. W. Nilsson,
Daniel Persson
Abstract:
We present the complete toroidal compactification of the Gauss-Bonnet Lagrangian from D dimensions to (D-n) dimensions. Our goal is to investigate the resulting action from the point of view of the "U-duality" symmetry SL(n+1,R) which is present in the tree-level Lagrangian when D-n=3. The analysis builds upon and extends the investigation of the paper [arXiv:0706.1183], by computing in detail t…
▽ More
We present the complete toroidal compactification of the Gauss-Bonnet Lagrangian from D dimensions to (D-n) dimensions. Our goal is to investigate the resulting action from the point of view of the "U-duality" symmetry SL(n+1,R) which is present in the tree-level Lagrangian when D-n=3. The analysis builds upon and extends the investigation of the paper [arXiv:0706.1183], by computing in detail the full structure of the compactified Gauss-Bonnet term, including the contribution from the dilaton exponents. We analyze these exponents using the representation theory of the Lie algebra sl(n+1,R) and determine which representation seems to be the relevant one for quadratic curvature corrections. By interpreting the result of the compactification as a leading term in a large volume expansion of an SL(n+1,Z)-invariant action, we conclude that the overall exponential dilaton factor should not be included in the representation structure. As a consequence, all dilaton exponents correspond to weights of sl(n+1,R), which, nevertheless, remain on the positive side of the root lattice.
△ Less
Submitted 26 February, 2008; v1 submitted 25 October, 2007;
originally announced October 2007.
