-
Photodetector Focal Plane Arrays Integrated with Silicon Micropyramidal Structures in MWIR
Authors:
Grant W. Bidney,
Joshua M. Duran,
Gamini Ariyawansa,
Igor Anisimov,
Kenneth W. Allen,
Vasily N. Astratov
Abstract:
Light-concentrating truncated Si micropyramidal arrays with 54.7 degree sidewall angles were successfully integrated with PtSi Schottky barrier photodetectors. Four different devices consisting of 10 x 10 photodetectors with 60 um pitch combined in parallel were tested, where significant enhancement capability was demonstrated by the Si micropyramids. The device consisting of one hundred 22 um squ…
▽ More
Light-concentrating truncated Si micropyramidal arrays with 54.7 degree sidewall angles were successfully integrated with PtSi Schottky barrier photodetectors. Four different devices consisting of 10 x 10 photodetectors with 60 um pitch combined in parallel were tested, where significant enhancement capability was demonstrated by the Si micropyramids. The device consisting of one hundred 22 um square detectors monolithically integrated with the light-concentrating micropyramidal array displayed signal enhancement of up to 4 times compared to the same size 22 um square photodetector device without the light concentrators.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Focusing and Diffraction of Light by Periodic Si Micropyramidal Arrays
Authors:
Grant W. Bidney,
Amstrong R. Jean,
Joshua M. Duran,
Gamini Ariyawansa,
Igor Anisimov,
Kenneth W. Allen,
Vasily N. Astratov
Abstract:
This research was devoted to modeling of the optical properties of Si micropyramids aimed at designing optimal structures for applications as light concentrators in mid-wave infrared (MWIR) focal place arrays (FPAs). It is shown that completely different optical properties of such structures can be realized using two types of boundary conditions (BCs): i) periodical and ii) perfectly matched layer…
▽ More
This research was devoted to modeling of the optical properties of Si micropyramids aimed at designing optimal structures for applications as light concentrators in mid-wave infrared (MWIR) focal place arrays (FPAs). It is shown that completely different optical properties of such structures can be realized using two types of boundary conditions (BCs): i) periodical and ii) perfectly matched layer. The first type (periodical BC) allowed us to describe the Talbot effect under plane wave coherent illumination conditions. This effect was experimentally demonstrated in the proposed structures. The second type (perfectly matched layer BC) allows describing the optical properties of individual micropyramids concentrating or focusing light on the photodetector. The optimal geometries of micropyramids required for maximizing the intensity of photonic nanojets emerging from their truncated tips are determined.
△ Less
Submitted 26 September, 2023;
originally announced September 2023.
-
Numerical verification of the convexification method for a frequency-dependent inverse scattering problem with experimental data
Authors:
Thuy Le,
Vo Anh Khoa,
Michael Victor Klibanov,
Loc Hoang Nguyen,
Grant Bidney,
Vasily Astratov
Abstract:
The reconstruction of physical properties of a medium from boundary measurements, known as inverse scattering problems, presents significant challenges. The present study aims to validate a newly developed convexification method for a 3D coefficient inverse problem in the case of buried unknown objects in a sandbox, using experimental data collected by a microwave scattering facility at The Univer…
▽ More
The reconstruction of physical properties of a medium from boundary measurements, known as inverse scattering problems, presents significant challenges. The present study aims to validate a newly developed convexification method for a 3D coefficient inverse problem in the case of buried unknown objects in a sandbox, using experimental data collected by a microwave scattering facility at The University of North Carolina at Charlotte. Our study considers the formulation of a coupled quasilinear elliptic system based on multiple frequencies. The system can be solved by minimizing a weighted Tikhonov-like functional, which forms our convexification method. Theoretical results related to the convexification are also revisited in this work.
△ Less
Submitted 1 June, 2023;
originally announced June 2023.
-
Convexification inversion method for nonlinear SAR imaging with experimentally collected data
Authors:
M. V. Klibanov,
V. A. Khoa,
A. V. Smirnov,
L. H. Nguyen,
G. W. Bidney,
L. H. Nguyen,
A. J. Sullivan,
V. N. Astratov
Abstract:
This paper is concerned with the study of a version of the globally convergent convexification method with direct application to synthetic aperture radar (SAR) imaging. Results of numerical testing are presented for experimentally collected data for a fake landmine. The SAR imaging technique is a common tool used to create maps of parts of the surface of the Earth or other planets. Recently, it ha…
▽ More
This paper is concerned with the study of a version of the globally convergent convexification method with direct application to synthetic aperture radar (SAR) imaging. Results of numerical testing are presented for experimentally collected data for a fake landmine. The SAR imaging technique is a common tool used to create maps of parts of the surface of the Earth or other planets. Recently, it has been applied in the context of non-invasive inspections of buildings in military and civilian services. Nowadays, any SAR imaging software is based on the Born approximation, which is a linearization of the original wave-like partial differential equation. One of the essential assumptions this linearization procedure needs is that only those dielectric constants are imaged whose values are close to the constant background. In this work, we propose a radically new idea: to work without any linearization while still using the same data as the conventional SAR imaging technique uses. We construct a 2D image of the dielectric constant function using a number of 1D images of this function obtained via solving a 1D coefficient inverse problem (CIP) for a hyperbolic equation. Different from our previous studies on the convexification method with concentration on the global convergence of the gradient projection method, this time we prove the global convergence of the gradient descent method, which is easier to implement numerically.
△ Less
Submitted 17 March, 2021;
originally announced March 2021.
-
An inverse problem of a simultaneous reconstruction of the dielectric constant and conductivity from experimental backscattering data
Authors:
Vo Anh Khoa,
Grant W. Bidney,
Michael V. Klibanov,
Loc H. Nguyen,
Lam H. Nguyen,
Anders J. Sullivan,
Vasily N. Astratov
Abstract:
This report extends our recent progress in tackling a challenging 3D inverse scattering problem governed by the Helmholtz equation. Our target application is to reconstruct dielectric constants, electric conductivities and shapes of front surfaces of objects buried very closely under the ground. These objects mimic explosives, like, e.g., antipersonnel land mines and improvised explosive devices.…
▽ More
This report extends our recent progress in tackling a challenging 3D inverse scattering problem governed by the Helmholtz equation. Our target application is to reconstruct dielectric constants, electric conductivities and shapes of front surfaces of objects buried very closely under the ground. These objects mimic explosives, like, e.g., antipersonnel land mines and improvised explosive devices. We solve a coefficient inverse problem with the backscattering data generated by a moving source at a fixed frequency. This scenario has been studied so far by our newly developed convexification method that consists in a new derivation of a boundary value problem for a coupled quasilinear elliptic system. However, in our previous work only the unknown dielectric constants of objects and shapes of their front surfaces were calculated. Unlike this, in the current work performance of our numerical convexification algorithm is verified for the case when the dielectric constants, the electric conductivities and those shapes of objects are unknown. By running several tests with experimentally collected backscattering data, we find that we can accurately image both the dielectric constants and shapes of targets of interests including a challenging case of targets with voids. The computed electrical conductivity serves for reliably distinguishing conductive and non-conductive objects. The global convergence of our numerical procedure is shortly revisited.
△ Less
Submitted 28 May, 2020;
originally announced June 2020.
-
Convexification and experimental data for a 3D inverse scattering problem with the moving point source
Authors:
Vo Anh Khoa,
Grant W. Bidney,
Michael V. Klibanov,
Loc H. Nguyen,
Lam H. Nguyen,
Anders J. Sullivan,
Vasily N. Astratov
Abstract:
Inverse scattering problems of the reconstructions of physical properties of a medium from boundary measurements are substantially challenging ones. This work aims to verify the performance on experimental data of a newly developed convexification method for a 3D coefficient inverse problem for the case of objects buried in a sandbox a fixed frequency and the point source moving along an interval…
▽ More
Inverse scattering problems of the reconstructions of physical properties of a medium from boundary measurements are substantially challenging ones. This work aims to verify the performance on experimental data of a newly developed convexification method for a 3D coefficient inverse problem for the case of objects buried in a sandbox a fixed frequency and the point source moving along an interval of a straight line. Using a special Fourier basis, the method of this work strongly relies on a new derivation of a boundary value problem for a system of coupled quasilinear elliptic equations. This problem, in turn, is solved via the minimization of a Tikhonov-like functional weighted by a Carleman Weight Function. The global convergence of the numerical procedure is established analytically. The numerical verification is performed using experimental data, which are raw backscatter data of the electric field. These data were collected using a microwave scattering facility at The University of North Carolina at Charlotte.
△ Less
Submitted 25 March, 2020;
originally announced March 2020.
