Showing 1–20 of 20 results for author: Bichara, C

Swinging Crystal Edge of Growing Carbon Nanotubes

Authors: Georg Daniel Förster, Vladimir Pimonov, Huy-Nam Tran, Saïd Tahir, Vincent Jourdain, Christophe Bichara

Abstract: Recent direct measurements of the growth kinetics of individual carbon nanotubes revealed abrupt changes in the growth rate of nanotubes maintaining the same crystal structure. These stochastic switches call into question the possibility of chirality selection based on growth kinetics. Here, we show that a similar average ratio between fast and slow rates of around 1.7 is observed largely independ… ▽ More Recent direct measurements of the growth kinetics of individual carbon nanotubes revealed abrupt changes in the growth rate of nanotubes maintaining the same crystal structure. These stochastic switches call into question the possibility of chirality selection based on growth kinetics. Here, we show that a similar average ratio between fast and slow rates of around 1.7 is observed largely independent of the catalyst and growth conditions. A simple model, supported by computer simulations, shows that these switches are caused by tilts of the growing nanotube edge between two main orientations, close-armchair or close-zigzag, inducing different growth mechanisms. The rate ratio of around 1.7 then simply results from an averaging of the number of growth sites and edge configurations in each orientation. Beyond providing new insights on nanotube growth based on classical crystal growth theory, these results point to ways to control the dynamics of nanotube edges, a key requirement for stabilizing growth kinetics and producing arrays of long structurally-selected nanotubes. △ Less

Submitted 23 February, 2023; originally announced February 2023.

Dynamics of growing carbon nanotube interfaces probed by machine learning-enabled molecular simulations

Authors: Daniel Hedman, Ben McLean, Christophe Bichara, Shigeo Maruyama, J. Andreas Larsson, Feng Ding

Abstract: Carbon nanotubes (CNTs) are currently considered a successor to silicon in future nanoelectronic devices. To realize this, controlled growth of defect-free nanotubes is required. Until now, the understanding of atomic-scale CNT growth mechanisms provided by molecular dynamics simulations has been hampered by their short timescales. Here, we develop an efficient and accurate machine learning force… ▽ More Carbon nanotubes (CNTs) are currently considered a successor to silicon in future nanoelectronic devices. To realize this, controlled growth of defect-free nanotubes is required. Until now, the understanding of atomic-scale CNT growth mechanisms provided by molecular dynamics simulations has been hampered by their short timescales. Here, we develop an efficient and accurate machine learning force field, DeepCNT-22, to simulate the complete growth of defect-free single-walled CNTs (SWCNTs) on iron catalysts at near-microsecond timescales. We provide atomic-level insight into the nucleation and growth processes of SWCNTs, including the evolution of the tube-catalyst interface and the mechanisms underlying defect formation and healing. Our simulations highlight the maximization of SWCNT-edge configurational entropy during growth and how defect-free CNTs can grow ultralong if carbon supply and temperature are carefully controlled. △ Less

Submitted 15 March, 2023; v1 submitted 19 February, 2023; originally announced February 2023.

Comments: Supporting Videos can be found on YouTube at the following links S1: https://youtu.be/K90Ca6uDNEQ S2: https://youtu.be/x8Z5Go5iW58 S3: https://youtu.be/e1Yx14PQjkg S4: https://youtu.be/JFKhklSHgA4

Dynamic instability of individual carbon nanotube growth revealed by in situ homodyne polarization microscopy

Authors: Vladimir Pimonov, Huy-Nam Tran, Léonard Monniello, Saïd Tahir, Thierry Michel, Renaud Podor, Michaël Odorico, Christophe Bichara, Vincent Jourdain

Abstract: Understanding the kinetic selectivity of carbon nanotube growth at the scale of individual nanotubes is essential for the development of high chiral selectivity growth methods. Here we demonstrate that homodyne polarization microscopy can be used for high-throughput imaging of long individual carbon nanotubes under real growth conditions (at ambient pressure, on a substrate), and with sub-second t… ▽ More Understanding the kinetic selectivity of carbon nanotube growth at the scale of individual nanotubes is essential for the development of high chiral selectivity growth methods. Here we demonstrate that homodyne polarization microscopy can be used for high-throughput imaging of long individual carbon nanotubes under real growth conditions (at ambient pressure, on a substrate), and with sub-second time resolution. Our in situ observations on hundreds of individual nanotubes reveal that about half of them grow at a constant rate all along their lifetime while the other half exhibits stochastic changes in growth rates, and switches between growth, pause and shrinkage. Statistical analysis shows that the growth rate of a given nanotube essentially varies between two values, with similar average ratio (~1.7) regardless of whether the rate change is accompanied by a change in chirality. These switches indicate that the nanotube edge or the catalyst nanoparticle fluctuates between different configurations during growth. △ Less

Submitted 4 October, 2021; originally announced October 2021.

Journal ref: Nano Letters, American Chemical Society, 2021

A Semi-Grand Canonical Kinetic Monte Carlo study of Single-Walled Carbon Nanotubes growth

Authors: Georg Daniel Förster, Thomas D. Swinburne, Hua Jiang, Esko Kauppinen, Christophe Bichara

Abstract: Single-walled carbon nanotubes exist in a variety of different geometries, so-called chiralities, that define their electronic properties. Chiral selectivity has been reported in catalytic chemical vapor deposition synthesis experiments, but the underlying mechanisms remain poorly understood. In this contribution, we establish a simple model for the prediction of the growth rates of carbon nanotub… ▽ More Single-walled carbon nanotubes exist in a variety of different geometries, so-called chiralities, that define their electronic properties. Chiral selectivity has been reported in catalytic chemical vapor deposition synthesis experiments, but the underlying mechanisms remain poorly understood. In this contribution, we establish a simple model for the prediction of the growth rates of carbon nanotubes of different chiralities, as a function of energies characterizing the carbon nanotube-catalyst interface and of parameters of the synthesis. The model is sampled efficiently using kinetic Monte Carlo simulations in the semi-grand canonical ensemble, uncovering the interplay of the external experimental conditions and the configuration and energetics of the interface with the catalyst. In particular, the distribution of chiral angle dependent growth rates follows non-monotonic trends as a function of interface energies. We analyze this behavior and use it to identify conditions that lead to high selectivity for a variety of chiral angles. △ Less

Submitted 12 March, 2021; v1 submitted 6 October, 2020; originally announced October 2020.

Comments: Animations are in the source files

A deep learning approach for determining the chiral indices of carbon nanotubes from high-resolution transmission electron microscopy images

Authors: G. D. Förster, A. Castan, A. Loiseau, J. Nelayah, D. Alloyeau, F. Fossard, C. Bichara, H. Amara

Abstract: Chiral indices determine important properties of carbon nanotubes (CNTs). Unfortunately, their determination from high-resolution transmission electron microscopy (HRTEM) images, the most accurate method for assigning chirality, is a tedious task. We develop a Convolutional Neural Network that automatizes this process. A large and realistic training data set of CNT images is obtained by means of a… ▽ More Chiral indices determine important properties of carbon nanotubes (CNTs). Unfortunately, their determination from high-resolution transmission electron microscopy (HRTEM) images, the most accurate method for assigning chirality, is a tedious task. We develop a Convolutional Neural Network that automatizes this process. A large and realistic training data set of CNT images is obtained by means of atomistic computer simulations coupled with the multi-slice approach for image generation. In most cases, results of the automated assignment are in excellent agreement with manual classification, and the origin of failures is identified. The current approach, which combines HRTEM imaging and deep learning algorithms allows the analysis of a statistically significant number of HRTEM images of carbon nanotubes, paving the way for robust estimates of experimental chiral distributions. △ Less

Submitted 25 March, 2020; originally announced March 2020.

Comments: for use of the discussed computer code, please contact the corresponding author

Journal ref: Carbon 169, 465 (2020)

Tuning bimetallic catalysts for a selective growth of SWCNTs

Authors: Salomé Forel, Alice Castan, Hakim Amara, Ileana Florea, Frédéric Fossard, Laure Catala, Christophe Bichara, Talal Mallah, Vincent Huc, Annick Loiseau, Costel-Sorin Cojocaru

Abstract: Recent advances in structural control during the synthesis of SWCNTs have in common the use of bimetallic nanoparticles as catalysts, despite the fact that their exact role is not fully understood. We therefore analyze the effect of the catalyst' s chemical composition on the structure of the resulting SWCNTs by comparing three bimetallic catalysts (FeRu, CoRu and NiRu). A specific synthesis proto… ▽ More Recent advances in structural control during the synthesis of SWCNTs have in common the use of bimetallic nanoparticles as catalysts, despite the fact that their exact role is not fully understood. We therefore analyze the effect of the catalyst' s chemical composition on the structure of the resulting SWCNTs by comparing three bimetallic catalysts (FeRu, CoRu and NiRu). A specific synthesis protocol is designed to impede the catalyst nanoparticle coalescence mechanisms and stabilize their diameter distributions throughout the growth. Owing to the ruthenium component which has a limited carbon solubility, tubes grow in tangential mode and their diameter is close to that of their seeding nanoparticle. By using as-synthesized SWCNTs as a channel material in field effect transistors, we show how the chemical composition of the catalysts and temperature can be used as parameters to tune the diameter distribution and semiconducting-to-metallic ratio of SWCNT samples. Finally, a phenomenological model, based on the dependence of the carbon solubility as a function of catalyst nanoparticle size and nature of the alloying elements, is proposed to interpret the results. △ Less

Submitted 17 December, 2018; originally announced December 2018.

Comments: 10 pages, 6 figures

Entropy driven stability of chiral single-walled carbon nanotubes

Authors: Yann Magnin, Hakim Amara, François Ducastelle, Annick Loiseau, Christophe Bichara

Abstract: Single-walled carbon nanotubes are hollow cylinders, that can grow centimeters long by carbon incorporation at the interface with a catalyst. They display semi-conducting or metallic characteristics, depending on their helicity, that is determined during their growth. To support the quest for a selective synthesis, we develop a thermodynamic model, that relates the tube-catalyst interfacial energi… ▽ More Single-walled carbon nanotubes are hollow cylinders, that can grow centimeters long by carbon incorporation at the interface with a catalyst. They display semi-conducting or metallic characteristics, depending on their helicity, that is determined during their growth. To support the quest for a selective synthesis, we develop a thermodynamic model, that relates the tube-catalyst interfacial energies, temperature, and the resulting tube chirality. We show that nanotubes can grow chiral because of the configurational entropy of their nanometer-sized edge, thus explaining experimentally observed temperature evolutions of chiral distributions. Taking the chemical nature of the catalyst into account through interfacial energies, structural maps and phase diagrams are derived, that will guide a rational choice of a catalyst and growth parameters towards a better selectivity. △ Less

Submitted 14 September, 2018; v1 submitted 20 March, 2018; originally announced March 2018.

Growth Modes and Chiral Selectivity of Single-Walled Carbon Nanotubes

Authors: Maoshuai He, Yann Magnin, Hua Jiang, Hakim Amara, Esko I. Kauppinen, Annick Loiseau, Christophe Bichara

Abstract: Chemical vapor deposition synthesis of single-walled carbon nanotubes experiments, using Fe catalyst, and alternating methane and carbon monoxide as carbon feedstocks, lead to the reversible formation of junctions between tubes of different diameters. Combined with an atomistic modeling of the tube / catalyst interface, this shows that the ratio of diameters of the tube and its seeding particle, d… ▽ More Chemical vapor deposition synthesis of single-walled carbon nanotubes experiments, using Fe catalyst, and alternating methane and carbon monoxide as carbon feedstocks, lead to the reversible formation of junctions between tubes of different diameters. Combined with an atomistic modeling of the tube / catalyst interface, this shows that the ratio of diameters of the tube and its seeding particle, denoting the growth mode, depends on the carbon fraction inside the catalyst. With carbon monoxide, nanoparticles are strongly carbon enriched, and tend to dewet the tube, in a perpendicular growth mode. Cross-checking our results with available reports from the literature of the last decade strongly suggests that these latter conditions should favor the near armchair chiral selectivity observed empirically. △ Less

Submitted 12 February, 2018; originally announced February 2018.

Comments: Nanoscale, Royal Society of Chemistry, A Paraître

Incipient Metals: Functional Materials with a Unique Bonding Mechanism

Authors: Matthias Wuttig, Volker L. Deringer, Xavier Gonze, Christophe Bichara, Jean-Yves Raty

Abstract: While solid-state materials are commonly classified as covalent, ionic, or metallic, there are cases that defy these iconic bonding mechanisms. A prominent example is given by phase-change materials (PCMs) for data storage or photonics, which have recently been argued to show 'resonant' bonding; a clear definition of this mechanism, however, has been lacking until the present day. Here we show tha… ▽ More While solid-state materials are commonly classified as covalent, ionic, or metallic, there are cases that defy these iconic bonding mechanisms. A prominent example is given by phase-change materials (PCMs) for data storage or photonics, which have recently been argued to show 'resonant' bonding; a clear definition of this mechanism, however, has been lacking until the present day. Here we show that these solids are clearly different from resonant bonding in the pi-orbital systems of benzene and graphene. Instead, they exhibit a unique mechanism between covalent and metallic bonding, which we call 'metavalent' bonding. The materials are on the verge of electron delocalization, which explains their exceptional property portfolio, and we therefore argue that they represent 'incipient metals'. This yields deeper, fundamental insight into the bonding nature of solid-state materials, and is expected to accelerate the discovery and design of new functional materials including PCMs and thermoelectrics. △ Less

Submitted 10 December, 2017; originally announced December 2017.

Probing the role of carbon solubility in transition metal catalyzing Single-Walled Carbon Nanotubes growth

Authors: Juan-Manuel Aguiar-Hualde, Yann Magnin, Hakim Amara, Christophe Bichara

Abstract: Metal catalysts supporting the growth of Single Wall Carbon Nanotubes display different carbon solubilities and chemical reactivities. In order to specifically assess the role of carbon solubility, we take advantage of the physical transparency of a tight binding model established for Ni-C alloys, to develop metal carbon models where all properties, except carbon solubility, are similar. These mod… ▽ More Metal catalysts supporting the growth of Single Wall Carbon Nanotubes display different carbon solubilities and chemical reactivities. In order to specifically assess the role of carbon solubility, we take advantage of the physical transparency of a tight binding model established for Ni-C alloys, to develop metal carbon models where all properties, except carbon solubility, are similar. These models are used to analyze carbon incorporation mechanisms, modifications of metal / carbon wall interfacial properties induced thereby, and the associated nanotube growth mechanisms. Fine tuning carbon solubility is shown to be essential to support sustainable growth, preventing growth termination by either nanoparticle encapsulation or detachment. △ Less

Submitted 22 February, 2017; originally announced February 2017.

Size dependent phase diagrams of Nickel-Carbon nanoparticles

Authors: Yann Magnin, Alexandre Zappelli, Hakim Amara, François Ducastelle, Christophe Bichara

Abstract: The carbon rich phase diagrams of nickel-carbon nanoparticles, relevant to catalysis and catalytic chemical vapor deposition synthesis of carbon nanotubes, are calculated for system sizes up to about 3 nanometers (807 Ni atoms). A tight binding model for interatomic interactions drives the Grand Canonical Monte Carlo simulations used to locate solid, core/shell and liquid stability domains, as a f… ▽ More The carbon rich phase diagrams of nickel-carbon nanoparticles, relevant to catalysis and catalytic chemical vapor deposition synthesis of carbon nanotubes, are calculated for system sizes up to about 3 nanometers (807 Ni atoms). A tight binding model for interatomic interactions drives the Grand Canonical Monte Carlo simulations used to locate solid, core/shell and liquid stability domains, as a function of size, temperature and carbon chemical potential or concentration. Melting is favored by carbon incorporation from the nanoparticle surface, resulting in a strong relative lowering of the eutectic temperature and a phase diagram topology different from the bulk one. This should be taken into account in our understanding of the nanotube growth mechanisms. △ Less

Submitted 10 June, 2015; v1 submitted 23 April, 2015; originally announced April 2015.

Topological Origin of Fracture Toughening in Complex Solids: the Viewpoint of Rigidity Theory

Authors: M. Bauchy, M. J. Abdolhosseini Qomi, C. Bichara, F. -J. Ulm, R. J. -M. Pellenq

Abstract: In order to design tougher materials, it is crucial to understand the relationship between their composition and their resistance to fracture. To this end, we investigate the fracture toughness of usual sodium silicate glasses (NS) and complex calcium--silicate--hydrates (CSH), the binding phase of cement. Their atomistic structure is described in the framework of the topological constraints theor… ▽ More In order to design tougher materials, it is crucial to understand the relationship between their composition and their resistance to fracture. To this end, we investigate the fracture toughness of usual sodium silicate glasses (NS) and complex calcium--silicate--hydrates (CSH), the binding phase of cement. Their atomistic structure is described in the framework of the topological constraints theory, or rigidity theory. We report an analogous rigidity transition, driven by pressure in NS and by composition in CSH. Relying both on simulated and available experimental results, we show that optimally constrained isostatic systems show improved fracture toughness. The flexible to stressed--rigid transition is shown to be correlated to a ductile-to-brittle transition, with a local minimum of the brittleness for isostatic system. This fracture toughening arises from a reversible molecular network, allowing optimal stress relaxation and crack blunting behaviors. This opens the way to the discovery of high-performance materials, designed at the molecular scale. △ Less

Submitted 10 October, 2014; originally announced October 2014.

Importance of carbon solubility and wetting properties of nickel nanoparticles for single wall nanotube growth

Authors: Mamadou Diarra, Alexandre Zappelli, Hakim Amara, François Ducastelle, Christophe Bichara

Abstract: Optimized growth of Single Wall Carbon Nanotubes requires a full knowledge of the actual state of the catalyst nanoparticle and its interface with the tube. Using Tight Binding based atomistic computer simulations, we calculate carbon adsorption isotherms on nanoparticles of nickel, a typical catalyst, and show that carbon solubility increases for smaller nanoparticles that are either molten or su… ▽ More Optimized growth of Single Wall Carbon Nanotubes requires a full knowledge of the actual state of the catalyst nanoparticle and its interface with the tube. Using Tight Binding based atomistic computer simulations, we calculate carbon adsorption isotherms on nanoparticles of nickel, a typical catalyst, and show that carbon solubility increases for smaller nanoparticles that are either molten or surface molten under experimental conditions. Increasing carbon content favors the dewetting of Ni nanoparticles with respect to sp2 carbon walls, a necessary property to limit catalyst encapsulation and deactivation. Grand Canonical Monte Carlo simulations of the growth of tube embryos show that wetting properties of the nanoparticles, controlled by carbon solubility, are of fundamental importance to enable the growth, shedding a new light on the growth mechanisms. △ Less

Submitted 23 June, 2012; originally announced June 2012.

Role of defect healing on the chirality of single-wall carbon nanotubes

Authors: Mamadou Diarra, Hakim Amara, Christophe Bichara, François Ducastelle

Abstract: Although significant efforts have been directed towards a selective single wall carbon nanotube synthesis, the resulting diameter and chirality distributions are still too broad and their control remains a challenge. Progress in this direction requires an understanding of the mechanisms leading to the chiral selectivity reported by some authors. Here, we focus on one possible such mechanism and in… ▽ More Although significant efforts have been directed towards a selective single wall carbon nanotube synthesis, the resulting diameter and chirality distributions are still too broad and their control remains a challenge. Progress in this direction requires an understanding of the mechanisms leading to the chiral selectivity reported by some authors. Here, we focus on one possible such mechanism and investigate the healing processes of defective tubes, at the atomic scale. We use tight-binding Monte Carlo simulations to perform a statistical analysis of the healing of a number of defective tubes. We study the role of temperature as a primary factor to overcome the energy barriers involved by healing, as well as the role of the metal catalyst. Using both electron diffraction patterns and local characterizations, we show that the healing proceeds first along the tube axis, before spreading laterally, and observe the competition between two or more chiralities. The resulting picture is that no chirality seems to be favored by the healing mechanisms, implying that the reported chiral preference should result from other sources. △ Less

Submitted 19 April, 2012; originally announced April 2012.

Nickel assisted healing of defective graphene

Authors: Sondes Karoui, Hakim Amara, Christophe Bichara, François Ducastelle

Abstract: The healing of graphene grown from a metallic substrate is investigated using tight-binding Monte Carlo simulations. At temperatures (ranging from 1000 to 2500 K), an isolated graphene sheet can anneal a large number of defects suggesting that their healing are thermally activated. We show that in presence of a nickel substrate we obtain a perfect graphene layer. The nickel-carbon chemical bonds k… ▽ More The healing of graphene grown from a metallic substrate is investigated using tight-binding Monte Carlo simulations. At temperatures (ranging from 1000 to 2500 K), an isolated graphene sheet can anneal a large number of defects suggesting that their healing are thermally activated. We show that in presence of a nickel substrate we obtain a perfect graphene layer. The nickel-carbon chemical bonds keep breaking and reforming around defected carbon zones, providing a direct interaction, necessary for the healing. Thus, the action of Ni atoms is found to play a key role in the reconstruction of the graphene sheet by annealing defects. △ Less

Submitted 1 September, 2010; originally announced September 2010.

Understanding amorphous phase-change materials from the viewpoint of Maxwell rigidity

Authors: M. Micoulaut, J-Y. Raty, C. Otjacques, C. Bichara

Abstract: Phase-change materials (PCMs) are the subject of considerable interest because they have been recognized as potential active layers for next-generation non-volatile memory devices, known as Phase Change Random Access Memories (PRAMs). By analyzing First Principles Molecular Dynamics simulations we develop a new method for the enumeration of mechanical constraints in the amorphous phase and show… ▽ More Phase-change materials (PCMs) are the subject of considerable interest because they have been recognized as potential active layers for next-generation non-volatile memory devices, known as Phase Change Random Access Memories (PRAMs). By analyzing First Principles Molecular Dynamics simulations we develop a new method for the enumeration of mechanical constraints in the amorphous phase and show that the phase diagram of the most popular system (Ge-Sb-Te) can be split into two compositional regions having a well-defined mechanical character: a Tellurium rich flexible phase, and a stressed rigid phase that encompasses the known PCMs. This sound atomic scale insight should open new avenues for the understanding of PCMs and other complex amorphous materials from the viewpoint of rigidity. △ Less

Submitted 28 September, 2009; originally announced September 2009.

Comments: 5 pages, 4 figures in EPS

A tight-binding potential for atomistic simulations of carbon interacting with transition metals: Application to the Ni-C system

Authors: Hakim Amara, Jean-Marc Roussel, Christophe Bichara, Jean-Pierre Gaspard, François Ducastelle

Abstract: We present a tight-binding potential for transition metals, carbon, and transition metal carbides, which has been optimized through a systematic fitting procedure. A minimal basis, including the s, p electrons of carbon and the d electrons of the transition metal, is used to obtain a transferable tight-binding model of the carbon-carbon, metal-metal and metal-carbon interactions applicable to bi… ▽ More We present a tight-binding potential for transition metals, carbon, and transition metal carbides, which has been optimized through a systematic fitting procedure. A minimal basis, including the s, p electrons of carbon and the d electrons of the transition metal, is used to obtain a transferable tight-binding model of the carbon-carbon, metal-metal and metal-carbon interactions applicable to binary systems. The Ni-C system is more specifically discussed. The successful validation of the potential for different atomic configurations indicates a good transferability of the model and makes it a good choice for atomistic simulations sampling a large configuration space. This approach appears to be very efficient to describe interactions in systems containing carbon and transition metal elements. △ Less

Submitted 6 October, 2008; originally announced October 2008.

Understanding the nucleation mechanisms of Carbon Nanotubes in catalytic Chemical Vapor Deposition

Authors: Hakim Amara, Christophe Bichara, François Ducastelle

Abstract: The nucleation of carbon caps on small nickel clusters is studied using a tight binding model coupled to grand canonical Monte Carlo simulations. It takes place in a well defined carbon chemical potential range, when a critical concentration of surface carbon atoms is reached. The solubility of carbon in the outermost Ni layers, that depends on the initial, crystalline or disordered, state of th… ▽ More The nucleation of carbon caps on small nickel clusters is studied using a tight binding model coupled to grand canonical Monte Carlo simulations. It takes place in a well defined carbon chemical potential range, when a critical concentration of surface carbon atoms is reached. The solubility of carbon in the outermost Ni layers, that depends on the initial, crystalline or disordered, state of the catalyst and on the thermodynamic conditions, is therefore a key quantity to control the nucleation. △ Less

Submitted 5 December, 2007; originally announced December 2007.

Interaction of carbon clusters with Ni(100) : Application to the nucleation of carbon nanotubes

Authors: Hakim Amara, Christophe Bichara, François Ducastelle

Abstract: In order to understand the first stages of the nucleation of carbon nanotubes in catalytic processes, we present a tight-binding Monte Carlo study of the stability and cohesive mechanisms of different carbon structures deposited on nickel (100) surfaces. Depending on the geometry, we obtain contrasted results. On the one hand, the analysis of the local energy distributions of flat carbon sheets,… ▽ More In order to understand the first stages of the nucleation of carbon nanotubes in catalytic processes, we present a tight-binding Monte Carlo study of the stability and cohesive mechanisms of different carbon structures deposited on nickel (100) surfaces. Depending on the geometry, we obtain contrasted results. On the one hand, the analysis of the local energy distributions of flat carbon sheets, demonstrate that dangling bonds remain unsaturated in spite of the presence of the metallic catalyst. Their adhesion results from the energy gain of the surface Ni atoms located below the carbon nanostructure. On the other hand, carbon caps are stabilized by the presence of carbon atoms occupying the hollow sites of the fcc nickel structure suggesting the saturation of the dangling bonds. △ Less

Submitted 16 July, 2007; originally announced July 2007.

A Tight-Binding Grand Canonical Monte Carlo Study of the Catalytic Growth of Carbon Nanotubes

Authors: Hakim Amara, Christophe Bichara, François Ducastelle

Abstract: The nucleation of carbon nanotubes on small nickel clusters is studied using a tight binding model coupled to grand canonical Monte Carlo simulations. This technique closely follows the conditions of the synthesis of carbon nanotubes by chemical vapor deposition. The possible formation of a carbon cap on the catalyst particle is studied as a function of the carbon chemical potential, for particl… ▽ More The nucleation of carbon nanotubes on small nickel clusters is studied using a tight binding model coupled to grand canonical Monte Carlo simulations. This technique closely follows the conditions of the synthesis of carbon nanotubes by chemical vapor deposition. The possible formation of a carbon cap on the catalyst particle is studied as a function of the carbon chemical potential, for particles of different size, either crystalline or disordered. We show that these parameters strongly influence the structure of the cap/particle interface which in turn will have a strong effect on the control of the structure of the nanotube. In particular, we discuss the presence of carbon on surface or in subsurface layers. △ Less

Submitted 16 April, 2007; originally announced April 2007.