-
Joint Design of Self-Tuning UHF RFID Antenna and Microfluidic Channel for Liquid Sensing
Authors:
Giulio Maria Bianco,
Gaetano Marrocco
Abstract:
Microfluidic has been an enabling technology for over a decade, particularly in the field of medical and wearable devices, allowing for the manipulation of small amounts of fluid in confined spaces. Micro-channels can also be used for wireless sensing thanks to the variations in antenna properties when the fluid flows near it. However, up to now, microfluidic channels and sensing antennas have alw…
▽ More
Microfluidic has been an enabling technology for over a decade, particularly in the field of medical and wearable devices, allowing for the manipulation of small amounts of fluid in confined spaces. Micro-channels can also be used for wireless sensing thanks to the variations in antenna properties when the fluid flows near it. However, up to now, microfluidic channels and sensing antennas have always been designed separately; instead, since the liquid flow and the antenna geometry both contribute to the overall performance, they should be considered simultaneously when optimizing the antenna-microfluidic system. In this paper, the joint design of the antenna and microfluidic channels is investigated for liquid quantification. Self-tuning RFID microchips are exploited to minimize communication degradation due to the increase of lossy liquid amount over the sensing antenna while digitalizing the impedance mismatch itself. To experimentally corroborate the joint design technique, two different geometries are obtained and prototyped starting from a given antenna-microfluidic layout by setting different goals for an optimization function. The two flexible RFID prototypes returned performance in agreement with the simulated ones, achieving a maximum sensitivity of about 20 units of the digital metric per milligram increase of water.
△ Less
Submitted 15 April, 2024; v1 submitted 12 April, 2024;
originally announced April 2024.
-
UHF RFID and NFC Point-of-Care -- Architecture, Security, and Implementation
Authors:
Giulio Maria Bianco,
Emanuele Raso,
Luca Fiore,
Vincenzo Mazzaracchio,
Lorenzo Bracciale,
Fabiana Arduini,
Pierpaolo Loreti,
Gaetano Marrocco,
Cecilia Occhiuzzi
Abstract:
Points-of-care (PoCs) augment healthcare systems by performing care whenever needed and are becoming increasingly crucial for the well-being of the worldwide population. Personalized medicine, chronic illness management, and cost reduction can be achieved thanks to the widespread adoption of PoCs. Significant incentives for PoCs deployment are nowadays given by wearable devices and, in particular,…
▽ More
Points-of-care (PoCs) augment healthcare systems by performing care whenever needed and are becoming increasingly crucial for the well-being of the worldwide population. Personalized medicine, chronic illness management, and cost reduction can be achieved thanks to the widespread adoption of PoCs. Significant incentives for PoCs deployment are nowadays given by wearable devices and, in particular, by RFID (RadioFrequency IDentification) and NFC (Near Field Communications), which are rising among the technological cornerstones of the healthcare internet of things (H-IoT). To fully exploit recent technological advancements, this paper proposes a system architecture for RFID- and NFC-based PoCs. The architecture comprises in a unitary framework both interfaces to benefit from their complementary features, and gathered data are shared with medical experts through secure and user-friendly interfaces that implement the Fast Health Interoperability Resource (FHIR) emerging healthcare standard. The selection of the optimal UHF and NFC components is discussed concerning the employable sensing techniques. The secure transmission of sensitive medical data is addressed by develo** a user-friendly "PoC App" that is the first web app exploiting attribute-based encryption (ABE). An application example of the system for monitoring the pH and cortisol levels in sweat is implemented and preliminarily tested by a healthy volunteer.
△ Less
Submitted 20 April, 2023; v1 submitted 17 April, 2023;
originally announced April 2023.
-
Body-UAV Near-Ground LoRa Links through a Mediterranean Forest
Authors:
Giulio Maria Bianco,
Gaetano Marrocco
Abstract:
LoRa low-power wide-area network protocol has recently gained attention for deploying ad-hoc search and rescue (SaR) systems. They could be empowered by exploiting body-UAV links that enable communications between a body-worn radio and a UAV-mounted one. However, to employ UAVs effectively, knowledge of the signal's propagation in the environment is required. Otherwise, communications and localiza…
▽ More
LoRa low-power wide-area network protocol has recently gained attention for deploying ad-hoc search and rescue (SaR) systems. They could be empowered by exploiting body-UAV links that enable communications between a body-worn radio and a UAV-mounted one. However, to employ UAVs effectively, knowledge of the signal's propagation in the environment is required. Otherwise, communications and localization could be hindered. The radio range, the packet delivery ratio (PDR), and the large- and small-scale fading of body-UAV LoRa links at 868 MHz when the radio wearer is in a Mediterranean forest are here characterized for the first time with a near-ground UAV having a maximum flying height of 30 m. A log-distance model accounting for the body shadowing and the wearer's movements is derived. Over the full LoRa radio range of about 600 m, the new model predicts the path loss (PL) better than the state-of-the-art ones, with a reduction of the median error even by 10 dB. The observed small-scale fading is severe and follows a Nakagami-m distribution. Extensions of the model for similar scenarios can be drawn through appropriate corrective factors.
△ Less
Submitted 25 March, 2023; v1 submitted 17 March, 2023;
originally announced March 2023.
-
Sensing Performance of Multi-Channel RFID-based Finger Augmentation Devices for Tactile Internet
Authors:
Federica Naccarata,
Giulio Maria Bianco,
Gaetano Marrocco
Abstract:
Radiofrequency finger augmentation devices (R-FADs) are a recently introduced class of epidermal radiofrequency identification (RFID) sensor-tags attached to the fingers, communicating with a body-worn reader. These devices are promising candidates to enable Tactile Internet (TI) applications in the short term. R-FAD based on auto-tuning RFID microchips can be used as dielectric probes for the mat…
▽ More
Radiofrequency finger augmentation devices (R-FADs) are a recently introduced class of epidermal radiofrequency identification (RFID) sensor-tags attached to the fingers, communicating with a body-worn reader. These devices are promising candidates to enable Tactile Internet (TI) applications in the short term. R-FAD based on auto-tuning RFID microchips can be used as dielectric probes for the material of touched objects. However, due to the nearly unpredictable intrinsic variability of finger-object interaction, a single sensorized finger (single-channel device) is not enough to guarantee reliable data sampling. These limitations can be overcome by exploiting a multi-channel R-FAD sensorizing multiple fingers of the hand. In this paper, the dielectric-sensing performance of a multi-channel R-FAD, composed of sensors encapsulated into soft elastomers, is numerically and experimentally characterized, involving a set of volunteers. The inter-sensor coupling is negligible, thus enabling simultaneous independent dielectric measurements. The multi-sensor configuration allows for 100% reliability of the on-hand communication link for touched objects in a wide range of permittivity. Experiments moreover demonstrate that multi-channel measurements can halve the measurement uncertainty of the single-channel case. The achievable precision is suitable to discriminate among low-, medium-, and high-permittivity materials.
△ Less
Submitted 25 May, 2022; v1 submitted 24 May, 2022;
originally announced May 2022.
-
Design and Manufacture of Flexible Epidermal NFC Device for Electrochemical Sensing of Sweat
Authors:
Adina Bianca Barba,
Giulio Maria Bianco,
Luca Fiore,
Fabiana Arduini,
Gaetano Marrocco,
Cecilia Occhiuzzi
Abstract:
Flexible and epidermal sensing devices are becoming vital to enable precision medicine and telemonitoring systems. The NFC (Near Field Communication) protocol is also becoming increasingly important for this application since it is embedded in most smartphones that can be used as pervasive and low-cost readers. Furthermore, the responder can be passive and can harvest enough power to perform elect…
▽ More
Flexible and epidermal sensing devices are becoming vital to enable precision medicine and telemonitoring systems. The NFC (Near Field Communication) protocol is also becoming increasingly important for this application since it is embedded in most smartphones that can be used as pervasive and low-cost readers. Furthermore, the responder can be passive and can harvest enough power to perform electromagnetic sensing. Finally, the NFC coils are robust to bending and to the human body's presence. This contribution details the design of a new flexible device, including an electrochemical sensor communicating through the NFC protocol. A spiral NFC antenna is designed, and a manufactured prototype is experimentally tested to quantify the robustness to the inter-wearer variability and the bending. Lastly, the sensory data retrieval is validated by comparison with a portable potentiostat. The realized sensor can be comfortably worn and be easily read by smartphones independently from the wearer and from the point of application and could be used in future for estimating the user's psycho-physical health by analyzing the body's sweat.
△ Less
Submitted 15 May, 2022;
originally announced May 2022.
-
Automatic Monitoring of Fruit Ripening Rooms by UHF RFID Sensor Network and Machine Learning
Authors:
Cecilia Occhiuzzi,
Francesca Camera,
Michele D'Orazio,
Nicola D'Uva,
Sara Amendola,
Giulio Maria Bianco,
Carolina Miozzi,
Luigi Garavaglia,
Eugenio Martinelli,
Gaetano Marrocco
Abstract:
Accelerated ripening through the exposure of fruits to controlled environmental conditions and gases is nowadays one of the most assessed food technologies, especially for climacteric and exotic products. However, a fine granularity control of the process and consequently of the quality of the goods is still missing, so the management of the ripening rooms is mainly based on qualitative estimation…
▽ More
Accelerated ripening through the exposure of fruits to controlled environmental conditions and gases is nowadays one of the most assessed food technologies, especially for climacteric and exotic products. However, a fine granularity control of the process and consequently of the quality of the goods is still missing, so the management of the ripening rooms is mainly based on qualitative estimations only. Following the modern paradigms of Industry 4.0, this contribution proposes a non-destructive RFID-based system for the automatic evaluation of the live ripening of avocados. The system, coupled with a properly trained automatic classification algorithm based on Support Vector Machines (SVMs), can discriminate the stage of ripening with an accuracy greater than 85%.
△ Less
Submitted 13 May, 2022; v1 submitted 26 April, 2022;
originally announced April 2022.
-
Numerical and Experimental Characterization of LoRa-Based Helmet-to-Unmanned Aerial Vehicle Links on Flat Lands: A Numerical-Statistical Approach to Link Modeling
Authors:
Giulio Maria Bianco,
Abraham Mejia-Aguilar,
Gaetano Marrocco
Abstract:
The use of the LoRa communication protocol in a new generation of transceivers is attractive for search and rescue(SaR) procedures because they can operate in harsh environmentscovering vast areas while maintaining a low power consumption.The possibility of wearing helmets equipped with LoRa-radiosand installing LoRa transceivers in unmanned aerial vehicles (UAVs) will accelerate the localization…
▽ More
The use of the LoRa communication protocol in a new generation of transceivers is attractive for search and rescue(SaR) procedures because they can operate in harsh environmentscovering vast areas while maintaining a low power consumption.The possibility of wearing helmets equipped with LoRa-radiosand installing LoRa transceivers in unmanned aerial vehicles (UAVs) will accelerate the localization of the targets, probably unconscious. In this paper, the achievable communication ranges of such links are theoretically and experimentally evaluated by considering the possible positions of the helmet wearer (standing or lying) on a flat field, representing a simple SaR scenario.Simulations and experimental tests demonstrated that, for the standing position, the ground-bounce multi-path produces strong fluctuations of the received power versus the Tx-Rx distances. Such fluctuations can be kept confined within 100 m from the target by lowering the UAV altitude. Instead, for a more critical lying position, the received power profile is monotonic and nearly insensitive to the posture. For all the considered cases, the signal emitted by the body-worn transceiver can be exploited to localize the helmet wearer based on its strength, and it is theoretically detectable by the UAV radio up to 5 km on flat terrain.
△ Less
Submitted 27 June, 2022; v1 submitted 12 January, 2022;
originally announced January 2022.
-
A Survey on Radio Frequency Identification as a Scalable Technology to Face Pandemics
Authors:
Giulio M. Bianco,
Cecilia Occhiuzzi,
Nicoletta Panunzio,
Gaetano Marrocco
Abstract:
The COVID-19 pandemic drastically changed our way of living. To minimize life losses, multi-level strategies requiring collective efforts were adopted while waiting for the vaccines' rollout. The management of such complex processes has taken benefit from the rising framework of the Internet of Things (IoT), and particularly the Radiofrequency Identification (RFID) since it is probably the most su…
▽ More
The COVID-19 pandemic drastically changed our way of living. To minimize life losses, multi-level strategies requiring collective efforts were adopted while waiting for the vaccines' rollout. The management of such complex processes has taken benefit from the rising framework of the Internet of Things (IoT), and particularly the Radiofrequency Identification (RFID) since it is probably the most suitable approach to both the micro (user) and the macro (processes) scale. Hence, a single infrastructure can support both the logistic and monitoring issues related to the war against a pandemic. Based on the COVID-19 experience, this paper is a survey on how state-of-the-art RFID systems can be employed in facing future pandemic outbreaks. The three pillars of the contrast of the pandemic are addressed: 1) use of Personal Protective Equipment (PPE), 2) access control and social distancing, and 3) early detection of symptoms. For each class, the envisaged RFID devices and procedures are discussed based on the available technology and the current worldwide research. This survey that RFID could generate an extraordinary amount of data so that complementary paradigms of Edge Computing and Artificial intelligence can be tightly integrated to extract profiles and identify anomalous events in compliance with privacy and security.
△ Less
Submitted 4 October, 2021; v1 submitted 25 August, 2021;
originally announced August 2021.
