-
Confidence-based Estimators for Predictive Performance in Model Monitoring
Authors:
Juhani Kivimäki,
Jakub Białek,
Jukka K. Nurminen,
Wojtek Kuberski
Abstract:
After a machine learning model has been deployed into production, its predictive performance needs to be monitored. Ideally, such monitoring can be carried out by comparing the model's predictions against ground truth labels. For this to be possible, the ground truth labels must be available relatively soon after inference. However, there are many use cases where ground truth labels are available…
▽ More
After a machine learning model has been deployed into production, its predictive performance needs to be monitored. Ideally, such monitoring can be carried out by comparing the model's predictions against ground truth labels. For this to be possible, the ground truth labels must be available relatively soon after inference. However, there are many use cases where ground truth labels are available only after a significant delay, or in the worst case, not at all. In such cases, directly monitoring the model's predictive performance is impossible.
Recently, novel methods for estimating the predictive performance of a model when ground truth is unavailable have been developed. Many of these methods leverage model confidence or other uncertainty estimates and are experimentally compared against a naive baseline method, namely Average Confidence (AC), which estimates model accuracy as the average of confidence scores for a given set of predictions. However, until now the theoretical properties of the AC method have not been properly explored. In this paper, we try to fill this gap by reviewing the AC method and show that under certain general assumptions, it is an unbiased and consistent estimator of model accuracy with many desirable properties. We also compare this baseline estimator against some more complex estimators empirically and show that in many cases the AC method is able to beat the others, although the comparative quality of the different estimators is heavily case-dependent.
△ Less
Submitted 11 July, 2024;
originally announced July 2024.
-
Estimating Model Performance Under Covariate Shift Without Labels
Authors:
Jakub Białek,
Wojtek Kuberski,
Nikolaos Perrakis,
Albert Bifet
Abstract:
Machine learning models often experience performance degradation post-deployment due to shifts in data distribution. It is challenging to assess model's performance accurately when labels are missing or delayed. Existing proxy methods, such as drift detection, fail to measure the effects of these shifts adequately. To address this, we introduce a new method, Probabilistic Adaptive Performance Esti…
▽ More
Machine learning models often experience performance degradation post-deployment due to shifts in data distribution. It is challenging to assess model's performance accurately when labels are missing or delayed. Existing proxy methods, such as drift detection, fail to measure the effects of these shifts adequately. To address this, we introduce a new method, Probabilistic Adaptive Performance Estimation (PAPE), for evaluating classification models on unlabeled data that accurately quantifies the impact of covariate shift on model performance. It is model and data-type agnostic and works for various performance metrics. Crucially, PAPE operates independently of the original model, relying only on its predictions and probability estimates, and does not need any assumptions about the nature of the covariate shift, learning directly from data instead. We tested PAPE on tabular data using over 900 dataset-model combinations created from US census data, assessing its performance against multiple benchmarks. Overall, PAPE provided more accurate performance estimates than other evaluated methodologies.
△ Less
Submitted 28 May, 2024; v1 submitted 16 January, 2024;
originally announced January 2024.
-
Machine-learning classification of astronomical sources: estimating F1-score in the absence of ground truth
Authors:
A. Humphrey,
W. Kuberski,
J. Bialek,
N. Perrakis,
W. Cools,
N. Nuyttens,
H. Elakhrass,
P. A. C. Cunha
Abstract:
Machine-learning based classifiers have become indispensable in the field of astrophysics, allowing separation of astronomical sources into various classes, with computational efficiency suitable for application to the enormous data volumes that wide-area surveys now typically produce. In the standard supervised classification paradigm, a model is typically trained and validated using data from re…
▽ More
Machine-learning based classifiers have become indispensable in the field of astrophysics, allowing separation of astronomical sources into various classes, with computational efficiency suitable for application to the enormous data volumes that wide-area surveys now typically produce. In the standard supervised classification paradigm, a model is typically trained and validated using data from relatively small areas of sky, before being used to classify sources in other areas of the sky. However, population shifts between the training examples and the sources to be classified can lead to `silent' degradation in model performance, which can be challenging to identify when the ground-truth is not available. In this Letter, we present a novel methodology using the NannyML Confidence-Based Performance Estimation (CBPE) method to predict classifier F1-score in the presence of population shifts, but without ground-truth labels. We apply CBPE to the selection of quasars with decision-tree ensemble models, using broad-band photometry, and show that the F1-scores are predicted remarkably well (MAPE ~ 10%; R^2 = 0.74-0.92). We discuss potential use-cases in the domain of astronomy, including machine-learning model and/or hyperparameter selection, and evaluation of the suitability of training datasets for a particular classification problem.
△ Less
Submitted 29 September, 2022;
originally announced September 2022.
-
Design and Operation of Hybrid Multi-Terminal Soft Open Points using Feeder Selector Switches for Flexible Distribution System Interconnection
Authors:
Matthew Deakin,
Phil C. Taylor,
Janusz Bialek,
Wenlong Ming
Abstract:
Distribution systems will require new cost-effective solutions to provide network capacity and increased flexibility to accommodate Low Carbon Technologies. To address this need, we propose the Hybrid Multi-Terminal Soft Open Point (Hybrid MT-SOP) to efficiently provide distribution system interconnection capacity. Each leg of the Hybrid MT-SOP has an AC/DC converter connected in series with a ban…
▽ More
Distribution systems will require new cost-effective solutions to provide network capacity and increased flexibility to accommodate Low Carbon Technologies. To address this need, we propose the Hybrid Multi-Terminal Soft Open Point (Hybrid MT-SOP) to efficiently provide distribution system interconnection capacity. Each leg of the Hybrid MT-SOP has an AC/DC converter connected in series with a bank of AC switches (Feeder Selector Switches) to allow the converter to connect to any of the feeders at a node. Asymmetric converter sizing is shown to increase feasible power transfers by up to 50% in the three-terminal case, whilst a conic mixed-integer program is formulated to optimally select the device configuration and power transfers. A case study shows the Hybrid MT-SOP increasing utilization of the converters by more than one third, with a 13% increase in system loss reduction as compared to an equally-sized MT-SOP.
△ Less
Submitted 15 January, 2022;
originally announced January 2022.
-
Identification of Stability Regions in Inverter-Based Microgrids
Authors:
Andrey Gorbunov,
Jimmy Chih-Hsien Peng,
Janusz W. Bialek,
Petr Vorobev
Abstract:
A new method for the stability assessment of inverter-based microgrids is presented in this paper. Directly determining stability boundaries by searching the multidimensional space of inverters' droop gains is a computationally prohibitive task. Instead, we build a certified stability region by utilizing a generalized Laplacian matrix eigenvalues, which are a measure of proximity to stability boun…
▽ More
A new method for the stability assessment of inverter-based microgrids is presented in this paper. Directly determining stability boundaries by searching the multidimensional space of inverters' droop gains is a computationally prohibitive task. Instead, we build a certified stability region by utilizing a generalized Laplacian matrix eigenvalues, which are a measure of proximity to stability boundary. We establish an upper threshold for the eigenvalues that determines the stability boundary of the entire system and demonstrate that this value depends only on the network's R/X ratio but does not depend on the grid topology. We also provide a conservative upper threshold of the eigenvalues that are universal for any systems within a reasonable range of R/X ratios. We then construct approximate certified stability regions representing convex sets in the multidimensional space of droop gains that could be utilized for gains optimization. We show how the certified stability region can be maximized by properly choosing droop gains, and we provide closed-form analytic expressions for the certified stability regions. The computational complexity of our method is almost independent of the number of inverters. The proposed methodology has been tested using IEEE 123 node test system with 10 inverters.
△ Less
Submitted 1 November, 2021;
originally announced November 2021.
-
Hybrid Open Points: an Efficient Tool for Increasing Network Capacity in Distribution Systems
Authors:
Matthew Deakin,
Ilias Sarantakos,
David M. Greenwood,
Janusz Bialek,
Phil C. Taylor,
Wenlong Ming,
Charalampos Patsios
Abstract:
This letter introduces the Hybrid Open Point (HOP), a device consisting of an electromechanical switch connected in parallel with a power converter, for the purpose of providing additional network capacity in interconnected distribution systems. The HOP switch is used for bulk power transfer at low-cost, whilst the HOP converter provides targeted power transfer when the HOP switch is open. The dev…
▽ More
This letter introduces the Hybrid Open Point (HOP), a device consisting of an electromechanical switch connected in parallel with a power converter, for the purpose of providing additional network capacity in interconnected distribution systems. The HOP switch is used for bulk power transfer at low-cost, whilst the HOP converter provides targeted power transfer when the HOP switch is open. The device can replace either a Normally Open Point (Type 1 HOP) or a Normally Closed Point (Type 2 HOP). Simple interconnection and teed interconnection configurations are studied considering fault level and radiality constraints, with realistic use-cases identified for both HOP types. The HOP is shown to provide secure network capacity more cost-effectively than the classical Soft Open Point.
△ Less
Submitted 4 December, 2021; v1 submitted 17 September, 2021;
originally announced September 2021.
-
Scanner data in inflation measurement: from raw data to price indices
Authors:
Jacek Białek,
Maciej Beręsewicz
Abstract:
Scanner data offer new opportunities for CPI or HICP calculation. They can be obtained from a~wide variety of~retailers (supermarkets, home electronics, Internet shops, etc.) and provide information at the level of~the barcode. One of~advantages of~using scanner data is the fact that they contain complete transaction information, i.e. prices and quantities for every sold item. To use scanner data,…
▽ More
Scanner data offer new opportunities for CPI or HICP calculation. They can be obtained from a~wide variety of~retailers (supermarkets, home electronics, Internet shops, etc.) and provide information at the level of~the barcode. One of~advantages of~using scanner data is the fact that they contain complete transaction information, i.e. prices and quantities for every sold item. To use scanner data, it must be carefully processed. After clearing data and unifying product names, products should be carefully classified (e.g. into COICOP 5 or below), matched, filtered and aggregated. These procedures often require creating new IT or writing custom scripts (R, Python, Mathematica, SAS, others). One of~new challenges connected with scanner data is the appropriate choice of~the index formula. In this article we present a~proposal for the implementation of~individual stages of~handling scanner data. We also point out potential problems during scanner data processing and their solutions. Finally, we compare a~large number of~price index methods based on real scanner datasets and we verify their sensitivity on adopted data filtering and aggregating methods.
△ Less
Submitted 22 May, 2020;
originally announced May 2020.
-
Stability of Disturbance Based Unified Control
Authors:
Oleg O. Khamisov,
Janusz W. Bialek,
Anatoly Dymarsky
Abstract:
Introduction of renewable generation leads to significant reduction of inertia in power system, which deteriorates the quality of frequency control. This paper suggests a new control scheme utilizing controllable load to deal with low inertia systems. Optimization problem is formulated to minimize the systems deviations from the last economically optimal operating point. The proposed scheme combin…
▽ More
Introduction of renewable generation leads to significant reduction of inertia in power system, which deteriorates the quality of frequency control. This paper suggests a new control scheme utilizing controllable load to deal with low inertia systems. Optimization problem is formulated to minimize the systems deviations from the last economically optimal operating point. The proposed scheme combines frequency control with congestion management and maintaining inter-area flows. The proposed distributed control scheme requires only local measurements and communication with neighbors or between buses participating in inter-area flows. Global asymptotic stability is proved for arbitrary network. Numerical simulations confirm that proposed algorithm can rebalance power and perform congestion management after disturbance with transient performance significantly improved in comparison with the traditional control scheme.
△ Less
Submitted 28 November, 2018;
originally announced November 2018.
-
Corrective control: stability analysis of Unified Controller combining frequency control and congestion management
Authors:
Oleg. O. Khamisov,
Tatiana. S. Chernova,
Janusz. W. Bialek,
Steven. H. Low
Abstract:
This paper analyses stability of the Unified Controller (UC) that combines frequency control and congestion management and therefore makes it possible to move from preventive to corrective power system control. Earlier work by the authors of UC proved asymptotic stability of the methodology but the proof was based on a simplified first-order model of the turbine and turbine governor. We show that…
▽ More
This paper analyses stability of the Unified Controller (UC) that combines frequency control and congestion management and therefore makes it possible to move from preventive to corrective power system control. Earlier work by the authors of UC proved asymptotic stability of the methodology but the proof was based on a simplified first-order model of the turbine and turbine governor. We show that a higher order model of the turbine governor leads to eigenvalues with small but positive real parts. Consequently, we develop a modification of the methodology that decouples the physical and control systems and therefore results in all the eigenvalues having negative real parts. We illustrate the effectiveness of the modification on a realistic model of 39-bus model of New England power system implemented in Power System Toolbox (PST).
△ Less
Submitted 1 August, 2018; v1 submitted 27 June, 2018;
originally announced June 2018.
-
PMU-Based Estimation of Dynamic State Jacobian Matrix and Dynamic System State Matrix in Ambient Conditions
Authors:
Xiaozhe Wang,
Janusz Bialek,
Konstantin Turitsyn
Abstract:
In this paper, a hybrid measurement- and model-based method is proposed which can estimate the dynamic state Jacobian matrix and the dynamic system state matrix in near real-time utilizing statistical properties extracted from PMU measurements. The proposed method can be used to detect and identify network topology changes that have not been reflected in an assumed network model. Additionally, an…
▽ More
In this paper, a hybrid measurement- and model-based method is proposed which can estimate the dynamic state Jacobian matrix and the dynamic system state matrix in near real-time utilizing statistical properties extracted from PMU measurements. The proposed method can be used to detect and identify network topology changes that have not been reflected in an assumed network model. Additionally, an application of the estimated system state matrix in online dynamic stability monitoring is presented.
△ Less
Submitted 4 June, 2017;
originally announced June 2017.
-
Operations- and Uncertainty-Aware Installation of FACTS Devices in a Large Transmission System
Authors:
Vladimir Frolov,
Priyanko Guha Thakurta,
Scott Backhaus,
Janusz Bialek,
Michael Chertkov
Abstract:
Decentralized electricity markets and more integration of renewables demand expansion of the existing transmission infrastructure to accommodate inflected variabilities in power flows. However, such expansion is severely limited in many countries because of political and environmental issues. Furthermore, high renewables integration requires additional reactive power support, which forces the tran…
▽ More
Decentralized electricity markets and more integration of renewables demand expansion of the existing transmission infrastructure to accommodate inflected variabilities in power flows. However, such expansion is severely limited in many countries because of political and environmental issues. Furthermore, high renewables integration requires additional reactive power support, which forces the transmission system operators to utilize the existing grid creatively, e.g., take advantage of new technologies, such as flexible alternating current transmission system (FACTS) devices. We formulate, analyze and solve the challenging investment planning problem of installation in an existing large-scale transmission grid multiple FACTS devices of two types (series capacitors and static VAR compensators.) We account for details of AC character of the power flows, probabilistic modeling of multiple-load scenarios, FACTS devices flexibility in terms of their adjustments within the capacity constraints, and long term practical tradeoffs between capital vs operational expenditures (CAPEX vs OPEX). It is demonstrated that proper installation of the devices allows to do both - extend or improve feasibility domain for the system and also decrease long term power generation cost (make cheaper generation available). Nonlinear, nonconvex, and multiple-scenario-aware optimization is resolved through an efficient heuristic algorithm consisting of a sequence of quadratic programmings solved by CPLEX combined with exact AC PF resolution for each scenario for maintaining feasible operational states during iterations. Efficiency and scalability of the approach is illustrated on the IEEE 30-bus model and the 2736-bus Polish model from Matpower.
△ Less
Submitted 24 May, 2019; v1 submitted 15 August, 2016;
originally announced August 2016.
-
Hydrodynamic simulations of correlation and scatter in galaxy cluster maps
Authors:
A. Finoguenov,
A. J. R. Sanderson,
J. J. Mohr,
J. J. Bialek,
A. Evrard
Abstract:
The two dimensional structure of hot gas in galaxy clusters contains information about the hydrodynamical state of the cluster, which can be used to understand the origin of scatter in the thermodynamical properties of the gas, and to improve the use of clusters to probe cosmology. Using a set of hydrodynamical simulations, we provide a comparison between various maps currently employed in the X…
▽ More
The two dimensional structure of hot gas in galaxy clusters contains information about the hydrodynamical state of the cluster, which can be used to understand the origin of scatter in the thermodynamical properties of the gas, and to improve the use of clusters to probe cosmology. Using a set of hydrodynamical simulations, we provide a comparison between various maps currently employed in the X-ray analysis of merging clusters and those cluster maps anticipated from forthcoming observations of the thermal Sunyaev-Zel'dovich effect. We show the following: 1) an X-ray pseudo-pressure, defined as square root of the soft band X-ray image times the temperature map is a good proxy for the SZ map; 2) we find that clumpiness is the main reason for deviation between X-ray pseudo-pressure and SZ maps; 3) the level of clumpiness can be well characterized by X-ray pseudo-entropy maps. 4) We describe the frequency of deviation in various maps of clusters as a function of the amplitude of the deviation. This enables both a comparison to observations and a comparison to effects of introduction of complex physical processes into simulation.
△ Less
Submitted 9 December, 2009;
originally announced December 2009.
-
Virial Scaling of Massive Dark Matter Halos: Why Clusters Prefer a High Normalization Cosmology
Authors:
A. E. Evrard,
J. Bialek,
M. Busha,
M. White,
S. Habib,
K. Heitmann,
M. Warren,
E. Rasia,
G. Tormen,
L. Moscardini,
C. Power,
A. R. Jenkins,
L. Gao,
C. S. Frenk,
V. Springel,
S. D. M. White,
J. Diemand
Abstract:
We present a precise estimate of the bulk virial scaling relation of halos formed via hierarchical clustering in an ensemble of simulated cold dark matter cosmologies. The result is insensitive to cosmological parameters, the presence of a trace, dissipationless gas component, and numerical resolution down to a limit of ~1000 particles. The dark matter velocity dispersion scales with total mass…
▽ More
We present a precise estimate of the bulk virial scaling relation of halos formed via hierarchical clustering in an ensemble of simulated cold dark matter cosmologies. The result is insensitive to cosmological parameters, the presence of a trace, dissipationless gas component, and numerical resolution down to a limit of ~1000 particles. The dark matter velocity dispersion scales with total mass as log(sigma_{DM}(M,z)) = log(1082.9 +- 4.0 \kms) + (0.3361 +- 0.0026) log(h(z)M_{200}/10^{15} Msun), with h(z) the dimensionless Hubble parameter. At fixed mass, the velocity dispersion likelihood is nearly log-normal, with scatter sigma_{ln sigma} = 0.0426 +- 0.015, except for a tail to higher dispersions containing 10% of the population that are merger transients. We combine this relation with the halo mass function in LCDM models, and show that a low normalization condition, S_8 = sigma_8(Omega_m/0.3)^{0.35} \= 0.69, favored by recent WMAP and SDSS analysis requires that galaxy and gas specific energies in rich clusters be 50% larger than that of the underlying dark matter. Such large energetic biases are in conflict with the current generation of direct simulations of cluster formation. A higher normalization, S_8 = 0.80, alleviates this tension and implies that the hot gas fraction within r_{500} is (0.71 +- 0.09) h_{70}^{-3/2} Omega_b/Ω_m, a value consistent with recent Sunyaev-Zel'dovich observations.
△ Less
Submitted 29 August, 2007; v1 submitted 8 February, 2007;
originally announced February 2007.
-
Effects of Mergers and Core Structure on the Bulk Properties of Nearby Galaxy Clusters
Authors:
Timothy B. O'Hara,
Joseph J. Mohr,
John J. Bialek,
August E. Evrard
Abstract:
We use morphological measurements and the scatter of clusters about observed and simulated scaling relations to examine the impact of merging and core-related phenomena on the structure of galaxy clusters. All relations constructed from emission-weighted mean temperature and intracluster medium mass, X-ray luminosity, isophotal size, or near-IR luminosity show a separation between cool core (CC)…
▽ More
We use morphological measurements and the scatter of clusters about observed and simulated scaling relations to examine the impact of merging and core-related phenomena on the structure of galaxy clusters. All relations constructed from emission-weighted mean temperature and intracluster medium mass, X-ray luminosity, isophotal size, or near-IR luminosity show a separation between cool core (CC) and non-cool core (NCC) clusters. We attribute this partially to a temperature bias in CC clusters, and partially to other cool core-related structural changes. We attempt to minimize CC/NCC separation in scaling relations by applying a uniform scale factor to CC cluster temperatures and determining the scale factor for each relation that minimizes the separation between CC and NCC populations, and by introducing central surface brightness as a third parameter in relations. The latter approach reduces scatter in relations more than temperature scaling. We compare the scatter within subsamples split by CC/NCC and morphological merger indicators. CC clusters and clusters with less substructure generally exhibit higher scatter about relations. The larger structural variations in CC clusters exit well outside the core, suggesting that a process more global than core radiative instability is at work. Simulations without cooling mechanisms also show no correlation between substructure and larger scatter about relations, indicating that any merger-related scatter increases are subtle. The results indicate that cool core related phenomena, not merging processes, are the primary contributor to scatter in scaling relations. Our analysis does not appear to support the scenario in which clusters evolve cool cores over time unless they experience major mergers. (Abridged)
△ Less
Submitted 9 December, 2005; v1 submitted 3 October, 2005;
originally announced October 2005.
-
Studying Dark Energy with Galaxy Cluster Surveys
Authors:
Joseph J. Mohr,
Brian OShea,
August E. Evrard,
John Bialek,
Zoltan Haiman
Abstract:
Galaxy cluster surveys provide a powerful means of studying the density and nature of the dark energy. The redshift distribution of detected clusters in a deep, large solid angle SZE or X-ray survey is highly sensitive to the dark energy equation of state. Accurate constraints at the 5% level on the dark energy equation of state require that systematic biases in the mass estimators must be contr…
▽ More
Galaxy cluster surveys provide a powerful means of studying the density and nature of the dark energy. The redshift distribution of detected clusters in a deep, large solid angle SZE or X-ray survey is highly sensitive to the dark energy equation of state. Accurate constraints at the 5% level on the dark energy equation of state require that systematic biases in the mass estimators must be controlled at better than the ~10% level. Observed regularity in the cluster population and the availability of multiple, independent mass estimators suggests these precise measurements are possible. Using hydrodynamical simulations that include preheating, we show that the level of preheating required to explain local galaxy cluster structure has a dramatic effect on X-ray cluster surveys, but only a mild effect on SZE surveys. This suggests that SZE surveys may be optimal for cosmology while X-ray surveys are well suited for studies of the thermal history of the intracluster medium.
△ Less
Submitted 5 August, 2002;
originally announced August 2002.
-
A Cold Front in a Preheated Galaxy Cluster
Authors:
John J. Bialek,
August E. Evrard,
Joseph J. Mohr
Abstract:
We present a simulated cluster of galaxies, modeled with a pre-heated intracluster medium, that exhibits X-ray features similar to the `cold fronts' seen in Chandra observations. Mock observations at a particular epoch show factor two discontinuities in X-ray temperature and factor four in surface brightness on a spatial scale <= 100 kpc. Analysis of the cluster's dynamical history reveals that…
▽ More
We present a simulated cluster of galaxies, modeled with a pre-heated intracluster medium, that exhibits X-ray features similar to the `cold fronts' seen in Chandra observations. Mock observations at a particular epoch show factor two discontinuities in X-ray temperature and factor four in surface brightness on a spatial scale <= 100 kpc. Analysis of the cluster's dynamical history reveals that the front is a transient contact discontinuity created by an ongoing merger of two roughly equal mass subgroups. The cold front feature in this realization is amplified by the adiabatic expansion of one of the subgroups following its ablation from the center of its local dark matter potential. The presence of cold front features in a cluster modeled without radiative cooling or magnetic fields implies that such relatively complex physics is not a necessary element of the phenomenon and suggests that the prevalence of such features in high resolution X-ray images of clusters may simply reflect the high frequency of ongoing mergers driven by gravity and comparatively simple hydrodynamics.
△ Less
Submitted 8 July, 2002;
originally announced July 2002.
-
Effects of Preheating on X-ray Scaling Relations in Galaxy Clusters
Authors:
John J. Bialek,
August E. Evrard,
Joseph J. Mohr
Abstract:
The failure of purely gravitational models of X-ray cluster formation to reproduce basic observed properties of the local cluster population suggests the need for one or more additional physical processes operating on the intracluster medium (ICM). We present results from 84 moderate resolution gas dynamic simulations designed to systematically investigate the effects of preheating - an initiall…
▽ More
The failure of purely gravitational models of X-ray cluster formation to reproduce basic observed properties of the local cluster population suggests the need for one or more additional physical processes operating on the intracluster medium (ICM). We present results from 84 moderate resolution gas dynamic simulations designed to systematically investigate the effects of preheating - an initially elevated ICM adiabat - on the resultant, local X-ray size-temperature, luminosity-temperature and ICM mass-temperature relations. Seven sets of twelve simulations are performed for a LambdaCDM cosmology, each set characterized by a different initial entropy level S_i. The slopes of the observable relations steepen monotonically as S_i is increased. Observed slopes for all three relations are reproduced by models with S_i: 55-150 keV cm^2, levels that compare favorably to empirical determinations of core ICM entropy by Lloyd-Davies, Ponman & Cannon. The redshift evolution for the case of a locally successful model with S_i = 106 keV cm^2 is presented. At temperatures kT > 3 keV, little or no evolution in physical isophotal sizes or bolometric luminosities is expected to z < 1. The ICM mass at fixed T is lower at higher z as expected in the canonical evolution model. ICM mass fractions show a mild T dependence. Clusters with T > 3 keV contain ICM mass fractions depressed by modest amounts (< 25%) below the cosmic mean baryon fraction Omega_b/Omega_m; hot clusters subject to preheating remain good tracers of the cosmic mix of clustered mass components.
△ Less
Submitted 19 February, 2001; v1 submitted 30 October, 2000;
originally announced October 2000.
-
The Cherenkov Correlated Timing Detector: Beam Test Results from Quartz and Acrylic Bars
Authors:
H. Kichimi,
Y. Sugaya,
H. Yamaguchi,
Y. Yoshimura,
S. Kanda,
S. Olsen,
K. Ueno,
G. Varner,
T. Bergfeld,
J. Bialek,
J. Lorenc,
M. Palmer,
G. Rudnick,
M. Selen,
T. Auran,
V. Boyer,
K. Honscheid,
N. Tamura,
K. Yoshimura,
C. Lu,
D. Marlow,
C. Mindas,
E. Prebys,
M. Asai,
A. Kimura
, et al. (1 additional authors not shown)
Abstract:
Several prototypes of a Cherenkov Correlated Timing (CCT) Detector have been tested at the KEK-PS test beam line. We describe the results for Cherenkov light yields and timing characteristics from quartz and acrylic bar prototypes. A Cherenkov angle resolution is found to be 15 mrad at a propagation distance of 100 cm with a 2 cm thick quartz bar prototype.
Several prototypes of a Cherenkov Correlated Timing (CCT) Detector have been tested at the KEK-PS test beam line. We describe the results for Cherenkov light yields and timing characteristics from quartz and acrylic bar prototypes. A Cherenkov angle resolution is found to be 15 mrad at a propagation distance of 100 cm with a 2 cm thick quartz bar prototype.
△ Less
Submitted 6 August, 1995; v1 submitted 3 August, 1995;
originally announced August 1995.