-
A Deep Reinforcement Learning-based Reserve Optimization in Active Distribution Systems for Tertiary Frequency Regulation
Authors:
Mukesh Gautam,
Rakib Hossain,
Mohammad MansourLakouraj,
Narayan Bhusal,
Mohammed Benidris,
Hanif Livani
Abstract:
Federal Energy Regulatory Commission (FERC) Orders 841 and 2222 have recommended that distributed energy resources (DERs) should participate in energy and reserve markets; therefore, a mechanism needs to be developed to facilitate DERs' participation at the distribution level. Although the available reserve from a single distribution system may not be sufficient for tertiary frequency regulation,…
▽ More
Federal Energy Regulatory Commission (FERC) Orders 841 and 2222 have recommended that distributed energy resources (DERs) should participate in energy and reserve markets; therefore, a mechanism needs to be developed to facilitate DERs' participation at the distribution level. Although the available reserve from a single distribution system may not be sufficient for tertiary frequency regulation, stacked and coordinated contributions from several distribution systems can enable them participate in tertiary frequency regulation at scale. This paper proposes a deep reinforcement learning (DRL)-based approach for optimization of requested aggregated reserves by system operators among the clusters of DERs. The co-optimization of cost of reserve, distribution network loss, and voltage regulation of the feeders are considered while optimizing the reserves among participating DERs. The proposed framework adopts deep deterministic policy gradient (DDPG), which is an algorithm based on an actor-critic method. The effectiveness of the proposed method for allocating reserves among DERs is demonstrated through case studies on a modified IEEE 34-node distribution system.
△ Less
Submitted 6 May, 2023;
originally announced May 2023.
-
Deep Q-Learning-based Distribution Network Reconfiguration for Reliability Improvement
Authors:
Mukesh Gautam,
Narayan Bhusal,
Mohammed Benidris
Abstract:
Distribution network reconfiguration (DNR) has proved to be an economical and effective way to improve the reliability of distribution systems. As optimal network configuration depends on system operating states (e.g., loads at each node), existing analytical and population-based approaches need to repeat the entire analysis and computation to find the optimal network configuration with a change i…
▽ More
Distribution network reconfiguration (DNR) has proved to be an economical and effective way to improve the reliability of distribution systems. As optimal network configuration depends on system operating states (e.g., loads at each node), existing analytical and population-based approaches need to repeat the entire analysis and computation to find the optimal network configuration with a change in system operating states. Contrary to this, if properly trained, deep reinforcement learning (DRL)-based DNR can determine optimal or near-optimal configuration quickly even with changes in system states. In this paper, a Deep Q Learning-based framework is proposed for the optimal DNR to improve reliability of the system. An optimization problem is formulated with an objective function that minimizes the average curtailed power. Constraints of the optimization problem are radial topology constraint and all nodes traversing constraint. The distribution network is modeled as a graph and the optimal network configuration is determined by searching for an optimal spanning tree. The optimal spanning tree is the spanning tree with the minimum value of the average curtailed power. The effectiveness of the proposed framework is demonstrated through several case studies on 33-node and 69-node distribution test systems.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Reserve Allocation in Active Distribution Systems for Tertiary Frequency Regulation: A Coalitional Game Theory-based Approach
Authors:
Mukesh Gautam,
Mohammad MansourLakouraj,
Rakib Hossain,
Narayan Bhusal,
Mohammed Benidris,
Hanif Livani
Abstract:
This paper proposes a coalitional game theory-based approach for reserve optimization to enable DERs participate in tertiary frequency regulation. A two-stage approach is proposed to effectively and precisely allocate spinning reserve requirements from each DER in distribution systems. In the first stage, two types of characteristic functions: worthiness index (WI) and power loss reduction (PLR) o…
▽ More
This paper proposes a coalitional game theory-based approach for reserve optimization to enable DERs participate in tertiary frequency regulation. A two-stage approach is proposed to effectively and precisely allocate spinning reserve requirements from each DER in distribution systems. In the first stage, two types of characteristic functions: worthiness index (WI) and power loss reduction (PLR) of each coalition are computed. In the second stage, the equivalent Shapley values are computed based on the characteristic functions, which are used to determine distribution factors for reserve allocation among DERs.
△ Less
Submitted 1 May, 2023;
originally announced May 2023.
-
Cyber-Physical Power System Layers: Classification, Characterization, and Interactions
Authors:
Michael Abdelmalak,
Narayan Bhusal,
Mukesh Gautam,
Mohammed Ben-Idris
Abstract:
This paper provides a strategy to identify layers and sub-layers of cyber-physical power systems (CPPS) and characterize their inter- and intra-actions. The physical layer usually consists of the power grid and protection devices whereas the cyber layer consists of communication, and computation and control components. Combining components of the cyber layer in one layer complicates the process of…
▽ More
This paper provides a strategy to identify layers and sub-layers of cyber-physical power systems (CPPS) and characterize their inter- and intra-actions. The physical layer usually consists of the power grid and protection devices whereas the cyber layer consists of communication, and computation and control components. Combining components of the cyber layer in one layer complicates the process of modeling intra-actions because each component has different failure modes. On the other hand, dividing the cyber layers into a large number of sub-layers may unnecessarily increase the number of system states and increase the computational burden. In this paper, we classify system layers based on their common, coupled, and shared functions. Also, interactions between the classified layers are identified, characterized, and clustered based on their impact on the system. Furthermore, based on the overall function of each layer and types of its components, intra-actions within layers are characterized. The strategies developed in this paper for comprehensive classification of system layers and characterization of their inter- and intra-actions contribute toward the goal of accurate and detailed modeling of state transition and failure and attack propagation in CPPS, which can be used for various reliability assessment studies.
△ Less
Submitted 13 February, 2023;
originally announced February 2023.
-
Sensitivity Comparison of Two-photon vs Three-photon Rydberg Electrometry
Authors:
Nikunjkumar Prajapati,
Narayan Bhusal,
Andrew P. Rotunno,
Samuel Berweger,
Matthew T. Simons,
Alexandra B. Artusio-Glimpse,
Ying Ju Wang,
Eric Bottomley,
Haoquan Fan,
Christopher L. Holloway
Abstract:
We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best r…
▽ More
We investigate the sensitivity of three-photon EIT in Rydberg atoms to radio frequency detection and compare it against conventional two-photon systems. Specifically, we model the 4-level and 5-level atomic system and compare how the transmission of the probe changes with different powers of the lasers used and strengths of the RF field. In this model, we also define a sensitivity metric to best relate to the operation of the current best experimental implementation based on shot noise limited detection. We find that the three-photon system boasts much narrower line widths compared to the conventional two-photon EIT. However, these narrow line features do not align with the regions of the best sensitivity. In addition to this, we calculate the expected sensitivity for the two-photon Rydberg sensor and find that the best achievable sensitivity is over an order of magnitude better than the current measured values of 5 uV/m/Hz. However, by accounting for the additional noise sources in the experiment and the quantum efficiency of the photo-detectors, the values are in good agreement.
△ Less
Submitted 23 November, 2022; v1 submitted 21 November, 2022;
originally announced November 2022.
-
Experimental Guesswork with Quantum Side Information using Twisted Light
Authors:
Vishal Katariya,
Narayan Bhusal,
Chenglong You
Abstract:
The guesswork is an information-theoretic quantity which can be seen as an alternate security criterion to entropy. Recent work has established the theoretical framework for guesswork in the presence of quantum side information, which we extend both theoretically and experimentally. We consider guesswork when the side information consists of the BB84 states and their higher-dimensional generalizat…
▽ More
The guesswork is an information-theoretic quantity which can be seen as an alternate security criterion to entropy. Recent work has established the theoretical framework for guesswork in the presence of quantum side information, which we extend both theoretically and experimentally. We consider guesswork when the side information consists of the BB84 states and their higher-dimensional generalizations. With this side information, we compute the guesswork for two different scenarios for each dimension. We then perform a proof-of-principle experiment using Laguerre-Gauss modes to experimentally compute the guesswork for higher-dimensional generalizations of the BB84 states. We find that our experimental results agree closely with our theoretical predictions. This work shows that guesswork can be a viable security criterion in cryptographic tasks, and is experimentally accessible across a number of optical setups.
△ Less
Submitted 15 November, 2022;
originally announced November 2022.
-
Hosting Capacity Approach Implications
Authors:
Narayan Bhusal,
Andrija Sadikovic,
Mohammed Ben-Idris
Abstract:
This paper revisits the generation hosting capacity (HC) calculation approach to account for grid operational flexibility--the ability to reconfigure the system safely. In essence, the generation hosting capacity is determined against the set of limiting factors--voltage, thermal (conductor loading), reverse flow (at the feeder head, station transformer, or substation), and change in the voltage (…
▽ More
This paper revisits the generation hosting capacity (HC) calculation approach to account for grid operational flexibility--the ability to reconfigure the system safely. In essence, the generation hosting capacity is determined against the set of limiting factors--voltage, thermal (conductor loading), reverse flow (at the feeder head, station transformer, or substation), and change in the voltage (due to sudden change in generation output)). Not that long ago, California Investor-Owned Utilities (IOUs) added a new criterion that does not allow reverse flow at the supervisory control and data acquisition (SCADA) points that can change the system configuration, aiming to prevent the potential transfer of reverse flow to an adjacent feeder. This new criterion intended to capture operational constraints as part of hosting capacity-known as hosting capacity with operational flexibility (OpFlex). This paper explores the shortfalls of such an approach and proposes performing actual transfer analysis when determining hosting capacity rather than implementing the OpFlex approach. Furthermore, we discuss the need for transition to determining hosting capacity profile (all intervals) rather than a flat line (one, worst performing interval) hosting capacity. A hosting capacity profile would inform the developers of interval-by-interval limits and opportunities, creating new opportunities to reach higher penetration of DERs at a lower cost. With technological and computational advancements, such an approach is neither out of implementation reach nor that computationally expensive. In return, far more DER can be interconnected once programmed not to violate certain generation profiles as part of the interconnection requirement, and utilities would be better informed of their actual operational flexibility, benefiting society overall.
△ Less
Submitted 20 October, 2021;
originally announced October 2021.
-
Smart Quantum Statistical Imaging beyond the Abbe-Rayleigh Criterion
Authors:
Narayan Bhusal,
Mingyuan Hong,
Nathaniel R. Miller,
Mario A Quiroz-Juarez,
Roberto de J. Leon-Montiel,
Chenglong You,
Omar S. Magana-Loaiza
Abstract:
The manifestation of the wave nature of light through diffraction imposes limits on the resolution of optical imaging. For over a century, the Abbe-Rayleigh criterion has been utilized to assess the spatial resolution limits of optical instruments. Recently, there has been an enormous impetus in overcoming the Abbe-Rayleigh resolution limit by projecting target light beams onto spatial modes. Thes…
▽ More
The manifestation of the wave nature of light through diffraction imposes limits on the resolution of optical imaging. For over a century, the Abbe-Rayleigh criterion has been utilized to assess the spatial resolution limits of optical instruments. Recently, there has been an enormous impetus in overcoming the Abbe-Rayleigh resolution limit by projecting target light beams onto spatial modes. These conventional schemes for superresolution rely on a series of spatial projective measurements to pick up phase information that is used to boost the spatial resolution of optical systems. Unfortunately, these schemes require a priori information regarding the coherence properties of "unknown" light beams. Furthermore, they require stringent alignment and centering conditions that cannot be achieved in realistic scenarios. Here, we introduce a smart quantum camera for superresolving imaging. This camera exploits the self-learning features of artificial intelligence to identify the statistical fluctuations of unknown mixtures of light sources at each pixel. This is achieved through a universal quantum model that enables the design of artificial neural networks for the identification of quantum photon fluctuations. Our camera overcomes the inherent limitations of existing superresolution schemes based on spatial mode projection. Thus, our work provides a new perspective in the field of imaging with important implications for microscopy, remote sensing, and astronomy.
△ Less
Submitted 11 October, 2021;
originally announced October 2021.
-
High-dimensional encryption in optical fibers using machine learning
Authors:
Michelle L. J. Lollie,
Fatemeh Mostafavi,
Narayan Bhusal,
Mingyuan Hong,
Chenglong You,
Roberto de J. León-Montiel,
Omar S. Magaña-Loaiza,
Mario A. Quiroz-Juárez
Abstract:
The ability to engineer the spatial wavefunction of photons has enabled a variety of quantum protocols for communication, sensing, and information processing. These protocols exploit the high dimensionality of structured light enabling the encodinng of multiple bits of information in a single photon, the measurement of small physical parameters, and the achievement of unprecedented levels of secur…
▽ More
The ability to engineer the spatial wavefunction of photons has enabled a variety of quantum protocols for communication, sensing, and information processing. These protocols exploit the high dimensionality of structured light enabling the encodinng of multiple bits of information in a single photon, the measurement of small physical parameters, and the achievement of unprecedented levels of security in schemes for cryptography. Unfortunately, the potential of structured light has been restrained to free-space platforms in which the spatial profile of photons is preserved. Here, we make an important step forward to using structured light for fiber optical communication. We introduce a smart high-dimensional encryption protocol in which the propagation of spatial modes in multimode fibers is used as a natural mechanism for encryption. This provides a secure communication channel for data transmission. The information encoded in spatial modes is retrieved using artificial neural networks, which are trained from the intensity distributions of experimentally detected spatial modes. Our on-fiber communication platform allows us to use spatial modes of light for high-dimensional bit-by-bit and byte-by-byte encoding. This protocol enables one to recover messages and images with almost perfect accuracy. Our smart protocol for high-dimensional optical encryption in optical fibers has key implications for quantum technologies relying on structured fields of light, particularly those that are challenged by free-space propagation.
△ Less
Submitted 13 August, 2021;
originally announced August 2021.
-
Single-mode input squeezing and tripartite entanglement in three-mode ponderomotive optomechanics simulations
Authors:
Kahlil Y. Dixon,
Lior Cohen,
Narayan Bhusal,
Jesse Frank,
Jonathan P. Dowling,
Thomas Corbitt
Abstract:
Quantum entanglement is a crucial resource for a wide variety of quantum technologies. However, the current state-of-art methods to generate quantum entanglement in optomechanical systems are not as efficient as all-optical methods utilizing nonlinear crystals. This article proposes a new scheme in which two single-mode squeezed light fields are injected into an optomechanical cavity. We demonstra…
▽ More
Quantum entanglement is a crucial resource for a wide variety of quantum technologies. However, the current state-of-art methods to generate quantum entanglement in optomechanical systems are not as efficient as all-optical methods utilizing nonlinear crystals. This article proposes a new scheme in which two single-mode squeezed light fields are injected into an optomechanical cavity. We demonstrate through our numerical simulations that the quantum entanglement can be substantially enhanced with the careful selection of squeezing strength and squeezing angle of the two quadrature squeezed light fields. Our results represent a significant improvement in output bipartite photon-photon entanglement over the previously demonstrated schemes using two coherent light fields as inputs. These simulations predict a maximum increase in bipartite optical entanglement by a factor of about 6, as well as increases in the quantum noise of the output light. A perceived loss of quantum information at certain squeezing angles is attributed to tripartite entanglement between the two optical fields and the optomechanical oscillator (OMO). At particular squeezing angles, the bipartite (or tripartite) entanglement can be increased, thus introducing a method of optically controlling the intracavity entanglement. These mechanics can benefit various optical quantum technologies utilizing optomechanical entanglement and continuous variable quantum optics.
△ Less
Submitted 16 December, 2021; v1 submitted 14 July, 2021;
originally announced July 2021.
-
A Cooperative Game Theory-based Approach to Under-frequency Load Shedding Control
Authors:
Mukesh Gautam,
Narayan Bhusal,
Mohammed Ben-Idris
Abstract:
This paper proposes a cooperative game theory-based under-frequency load shedding (UFLS) approach for frequency stability and control in power systems. UFLS is a crucial factor for frequency stability and control especially in power grids with high penetration of renewable energy sources and restructured power systems. Conventional UFLS methods, most of which are off-line, usually shed fixed amoun…
▽ More
This paper proposes a cooperative game theory-based under-frequency load shedding (UFLS) approach for frequency stability and control in power systems. UFLS is a crucial factor for frequency stability and control especially in power grids with high penetration of renewable energy sources and restructured power systems. Conventional UFLS methods, most of which are off-line, usually shed fixed amounts of predetermined loads based on a predetermined schedule which can lead to over or under curtailment of load. This paper presents a co-operative game theory-based two-stage strategy to effectively and precisely determine locations and amounts of loads to be shed for UFLS control. In the first stage, the total amount of loads to be shed, also referred to as deficit in generation or the disturbance power, is computed using the initial rate of change of frequency (ROCOF) referred to the equivalent inertial center. In the second stage, the Shapley value, one of the solution concepts of cooperative game theory, is used to determine load shedding amounts and locations. The proposed method is implemented on the reduced 9-bus 3-machine Western Electricity Coordinating Council (WECC) system and simulated on Real-time Digital Simulators (RTDS). The results show that the proposed UFLS approach can effectively return the system to normal state after disturbances.
△ Less
Submitted 27 June, 2021;
originally announced June 2021.
-
Low-Light Shadow Imaging using Quantum-Noise Detection with a Camera
Authors:
Savannah L. Cuozzo,
Pratik J. Barge,
Nikunjkumar Prajapati,
Narayan Bhusal,
Hwang Lee,
Lior Cohen,
Irina Novikova,
Eugeniy E. Mikhailov
Abstract:
We experimentally demonstrate an imaging technique based on quantum noise modification after interaction with an opaque object. By using a homodyne-like detection scheme, we eliminate the detrimental effect of the camera's dark noise, making this approach particularly attractive for imaging scenarios that require weak illumination. Here, we reconstruct the image of an object illuminated with a squ…
▽ More
We experimentally demonstrate an imaging technique based on quantum noise modification after interaction with an opaque object. By using a homodyne-like detection scheme, we eliminate the detrimental effect of the camera's dark noise, making this approach particularly attractive for imaging scenarios that require weak illumination. Here, we reconstruct the image of an object illuminated with a squeezed vacuum using a total of 800 photons, utilizing less than one photon per frame on average.
△ Less
Submitted 20 September, 2021; v1 submitted 1 June, 2021;
originally announced June 2021.
-
Observation of the Modification of Quantum Statistics of Plasmonic Systems
Authors:
Chenglong You,
Mingyuan Hong,
Narayan Bhusal,
**nan Chen,
Mario A. Quiroz-Juárez,
Fatemeh Mostafavi,
Junpeng Guo,
Israel De Leon,
Roberto de J. León-Montiel,
Omar S. Magaña-Loaiza
Abstract:
For almost two decades, it has been believed that the quantum statistical properties of bosons are preserved in plasmonic systems. This idea has been stimulated by experimental work reporting the possibility of preserving nonclassical correlations in light-matter interactions mediated by scattering among photons and plasmons. Furthermore, it has been assumed that similar dynamics underlies the con…
▽ More
For almost two decades, it has been believed that the quantum statistical properties of bosons are preserved in plasmonic systems. This idea has been stimulated by experimental work reporting the possibility of preserving nonclassical correlations in light-matter interactions mediated by scattering among photons and plasmons. Furthermore, it has been assumed that similar dynamics underlies the conservation of the quantum fluctuations that define the nature of light sources. Here, we demonstrate that quantum statistics are not always preserved in plasmonic systems and report the first observation of their modification. Moreover, we show that multiparticle scattering effects induced by confined optical near fields can lead to the modification of the excitation mode of plasmonic systems. These observations are validated through the quantum theory of optical coherence for single- and multi-mode plasmonic systems. Our findings constitute a new paradigm in the understanding of the quantum properties of plasmonic systems and unveil new paths to perform exquisite control of quantum multiparticle systems.
△ Less
Submitted 5 April, 2021;
originally announced April 2021.
-
Noisy Coherent Population Trap**: Applications to Noise Estimation and Qubit State Preparation
Authors:
Arshag Danageozian,
Ashe Miller,
Pratik J. Barge,
Narayan Bhusal,
Jonathan P. Dowling
Abstract:
Coherent population trap** is a well-known quantum phenomenon in a driven $Λ$ system, with many applications across quantum optics. However, when a stochastic bath is present in addition to vacuum noise, the observed trap** is no longer perfect. Here we derive a time-convolutionless master equation describing the equilibration of the $Λ$ system in the presence of additional temporally correlat…
▽ More
Coherent population trap** is a well-known quantum phenomenon in a driven $Λ$ system, with many applications across quantum optics. However, when a stochastic bath is present in addition to vacuum noise, the observed trap** is no longer perfect. Here we derive a time-convolutionless master equation describing the equilibration of the $Λ$ system in the presence of additional temporally correlated classical noise, with an unknown decay parameter. Our simulations show a one-to-one correspondence between the decay parameter and the depth of the characteristic dip in the photoluminescence spectrum, thereby enabling the unknown parameter to be estimated from the observed spectra. We apply our analysis to the problem of qubit state initialization in a $Λ$ system via dark states and show how the stochastic bath affects the fidelity of such initialization as a function of the desired dark-state amplitudes. We show that an optimum choice of Rabi frequencies is possible.
△ Less
Submitted 3 July, 2022; v1 submitted 30 March, 2021;
originally announced March 2021.
-
Smart Quantum Technologies using Photons
Authors:
Narayan Bhusal
Abstract:
The technologies utilizing quantum states of light have been in the spotlight for the last two decades. In this regard, quantum metrology, quantum imaging, quantum-optical communication are some of the important applications that exploit fascinating quantum properties like quantum superposition, quantum correlations, and nonclassical photon statistics. However, the state-of-art technologies operat…
▽ More
The technologies utilizing quantum states of light have been in the spotlight for the last two decades. In this regard, quantum metrology, quantum imaging, quantum-optical communication are some of the important applications that exploit fascinating quantum properties like quantum superposition, quantum correlations, and nonclassical photon statistics. However, the state-of-art technologies operating at the single-photon level are not robust enough to truly realize a reliable quantum-photonic technology.
In Chapter 1, I present a historical account of photon-based technologies. Furthermore, I discuss recent encouraging developments in the field of quantum-photonic technologies, and major challenges for the implementation of reliable quantum technologies, setting up a stage for unveiling our smart methodologies to cope with them. Similarly, in Chapter 2, I review the fundamental concepts of quantum optics and machine learning. In Chapter 3, I present a theoretical work on a nonlinear quantum metrology scheme, showing a sub-shot-noise limited phase estimation using the displaced-squeezed light and on/off detection. Furthermore, I discuss a camera-based squeezed-light detection that can be a smart and time-efficient alternative to balanced-homodyne detection. In Chapter 4, I discuss our efforts to incorporate artificial intelligence in a quest to improve the efficiency of discriminating thermal light from coherent light sources. In Chapter 5, I present a communication protocol in presence of random phase distortions. We utilize convolutional neural networks to perform the spatial mode correction of single photons, resulting in a near-unity fidelity of correction. Finally, I wrap up my dissertation in Chapter 6 by summarizing the historical context, challenges facing state-of-art techniques, and the importance of our efforts to introduce artificial intelligence in quantum technologies.
△ Less
Submitted 1 May, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Deep Ensemble Learning-based Approach to Real-time Power System State Estimation
Authors:
Narayan Bhusal,
Raj Mani Shukla,
Mukesh Gautam,
Mohammed Benidris,
Shamik Sengupta
Abstract:
Power system state estimation (PSSE) is commonly formulated as weighted least-square (WLS) algorithm and solved using iterative methods such as Gauss-Newton methods. However, iterative methods have become more sensitive to system operating conditions than ever before due to the deployment of intermittent renewable energy sources, low carbon technologies (e.g., electric vehicles), and demand respon…
▽ More
Power system state estimation (PSSE) is commonly formulated as weighted least-square (WLS) algorithm and solved using iterative methods such as Gauss-Newton methods. However, iterative methods have become more sensitive to system operating conditions than ever before due to the deployment of intermittent renewable energy sources, low carbon technologies (e.g., electric vehicles), and demand response programs. Appropriate PSSE approaches are required to avoid pitfalls of the WLS-based PSSE computations for accurate prediction of operating conditions. This paper proposes a data-driven real-time PSSE using a deep ensemble learning algorithm. In the proposed approach, the ensemble learning setup is formulated with dense residual neural networks as base-learners and multivariate-linear regressor as meta-learner. Historical measurements and states are utilised to train and test the model. The trained model can be used in real-time to estimate power system states (voltage magnitudes and phase angles) using real-time measurements. Most of current data-driven PSSE methods assume the availability of a complete set of measurements, which may not be the case in real power system data-acquisition. This paper adopts multivariate linear regression to forecast system states for instants of missing measurements to assist the proposed PSSE technique. Case studies are performed on various IEEE standard benchmark systems to validate the proposed approach. The results show that the proposed approach outperforms existing data-driven PSSE methods techniques.
△ Less
Submitted 9 January, 2021;
originally announced January 2021.
-
A GA-based Approach to Eco-driving of Electric Vehicles Considering Regenerative Braking
Authors:
Mukesh Gautam,
Narayan Bhusal,
Mohammed Benidris,
Poria Fajri
Abstract:
As the deployment of low carbon transportation technologies, specifically electric vehicles (EVs), is increasing, the concept of their eco-driving is gaining significant attention. Contrary to the eco-driving techniques used in conventional internal combustion engine vehicles that do not have the capability of regenerative braking, this paper proposes a genetic algorithm (GA)-based eco-driving tec…
▽ More
As the deployment of low carbon transportation technologies, specifically electric vehicles (EVs), is increasing, the concept of their eco-driving is gaining significant attention. Contrary to the eco-driving techniques used in conventional internal combustion engine vehicles that do not have the capability of regenerative braking, this paper proposes a genetic algorithm (GA)-based eco-driving technique for EVs considering regenerative braking. In the proposed approach, the optimal or near-optimal combination of variables in the driving cycle of EVs is searched using GA. The proposed approach starts by generating an initial population of chromosomes, where all variables under consideration are encoded in each chromosome. This population of chromosomes is passed through crossover, mutation, and elitist-based selection over a certain number of generations, which results in a driving cycle with the least energy consumption. The proposed method is verified using two case studies. The results of the case studies show the capability of the proposed method in computing the minimum energy driving cycle.
△ Less
Submitted 30 December, 2020;
originally announced December 2020.
-
Power System Dynamic State Estimation Using Extended and Unscented Kalman Filters
Authors:
Narayan Bhusal,
Mukesh Gautam
Abstract:
Accurate estimation of power system dynamics is very important for the enhancement of power system reliability, resilience, security, and stability of power system. With the increasing integration of inverter-based distributed energy resources, the knowledge of power system dynamics has become more necessary and critical than ever before for proper control and operation of the power system. Althou…
▽ More
Accurate estimation of power system dynamics is very important for the enhancement of power system reliability, resilience, security, and stability of power system. With the increasing integration of inverter-based distributed energy resources, the knowledge of power system dynamics has become more necessary and critical than ever before for proper control and operation of the power system. Although recent advancement of measurement devices and the transmission technologies have reduced the measurement and transmission error significantly, these measurements are still not completely free from the measurement noises. Therefore, the noisy measurements need to be filtered to obtain the accurate power system operating dynamics. In this work, the power system dynamic states are estimated using extended Kalman filter (EKF) and unscented Kalman filter (UKF). We have performed case studies on Western Electricity Coordinating Council (WECC)'s $3$-machine $9$-bus system and New England $10$-machine $39$-bus. The results show that the UKF and EKF can accurately estimate the power system dynamics. The comparative performance of EKF and UKF for the tested case is also provided. Other Kalman filtering techniques alongwith the machine learning-based estimator will be updated inthis report soon.All the sources code including Newton Raphsonpower flow, admittance matrix calculation, EKF calculation, andUKF calculation are publicly available in Github
△ Less
Submitted 10 December, 2020;
originally announced December 2020.
-
A Spanning Tree-based Genetic Algorithm for Distribution Network Reconfiguration
Authors:
Mukesh Gautam,
Narayan Bhusal,
Mohammed Benidris,
Sushil J. Louis
Abstract:
This paper presents a spanning tree-based genetic algorithm (GA) for the reconfiguration of electrical distribution systems with the objective of minimizing active power losses. Due to low voltage levels at distribution systems, power losses are high and sensitive to system configuration. Therefore, optimal reconfiguration is an important factor in the operation of distribution systems to minimize…
▽ More
This paper presents a spanning tree-based genetic algorithm (GA) for the reconfiguration of electrical distribution systems with the objective of minimizing active power losses. Due to low voltage levels at distribution systems, power losses are high and sensitive to system configuration. Therefore, optimal reconfiguration is an important factor in the operation of distribution systems to minimize active power losses. Smart and automated electric distribution systems are able to reconfigure as a response to changes in load levels to minimize active power losses. The proposed method searches spanning trees of potential configurations and finds the optimal spanning tree using a genetic algorithm in two steps. In the first step, all invalid combinations of branches and tie-lines (i.e., switching combinations that do not provide power to some of loads or violate the radiality and connectivity conditions) generated by initial population of GA are filtered out with the help of spanning-tree search algorithm. In the second step, power flow analyses are performed only for combinations that form spanning trees. The optimal configuration is then determined based on the amount of active power losses (optimal configuration is the one that results in minimum power losses). The proposed method is implemented on several systems including the well-known 33-node and 69-node systems. The results show that the proposed method is accurate and efficient in comparison with existing methods.
△ Less
Submitted 18 August, 2020;
originally announced August 2020.
-
Optimal Sizing and Siting of Multi-purpose Utility-scale Shared Energy Storage Systems
Authors:
Narayan Bhusal,
Mukesh Gautam,
Mohammed Benidris,
Sushil J. Louis
Abstract:
This paper proposes a nondominated sorting genetic algorithm II (NSGA-II) based approach to determine optimal or near-optimal sizing and siting of multi-purpose (e.g., voltage regulation and loss minimization), community-based, utility-scale shared energy storage in distribution systems with high penetration of solar photovoltaic energy systems. Small-scale behind-the-meter (BTM) batteries are exp…
▽ More
This paper proposes a nondominated sorting genetic algorithm II (NSGA-II) based approach to determine optimal or near-optimal sizing and siting of multi-purpose (e.g., voltage regulation and loss minimization), community-based, utility-scale shared energy storage in distribution systems with high penetration of solar photovoltaic energy systems. Small-scale behind-the-meter (BTM) batteries are expensive, not fully utilized, and their net value is difficult to generalize and to control for grid services. On the other hand, utility-scale shared energy storage (USSES) systems have the potential to provide primary (e.g., demand-side management, deferral of system upgrade, and demand charge reduction) as well as secondary (e.g., frequency regulation, resource adequacy, and energy arbitrage) grid services. Under the existing cost structure, storage deployed only for primary purpose cannot justify the economic benefit to owners. However, the delivery of storage for primary service utilizes only 1-50\% of total battery lifetime capacity. In the proposed approach, for each candidate set of locations and sizes, the contribution of USSES systems to grid voltage deviation and power loss are evaluated and diverse Pareto-optimal front is created. USSES systems are dispersed through a new chromosome representation approach. From the list of Pareto-optimal front, distribution system planners will have the opportunity to select appropriate locations based on desired objectives. The proposed approach is demonstrated on the IEEE 123-node distribution test feeder with utility-scale PV and USSES systems.
△ Less
Submitted 18 August, 2020;
originally announced August 2020.
-
A Sensitivity-based Approach for Optimal Siting of Distributed Energy Resources
Authors:
Mukesh Gautam,
Narayan Bhusal,
Mohammed Benidris,
Chanan Singh,
Joydeep Mitra
Abstract:
This paper presents a sensitivity-based approach for the placement of distributed energy resources (DERs) in power systems. The approach is based on the fact that most planning studies utilize some form of optimization, and solutions to these optimization problems provide insights into the sensitivity of many system variables to operating conditions and constraints. However, most of the existing s…
▽ More
This paper presents a sensitivity-based approach for the placement of distributed energy resources (DERs) in power systems. The approach is based on the fact that most planning studies utilize some form of optimization, and solutions to these optimization problems provide insights into the sensitivity of many system variables to operating conditions and constraints. However, most of the existing sensitivity-based planning criteria do not capture ranges of effectiveness of these solutions (i.e., ranges of the effectiveness of Lagrange multipliers). The proposed method detects the ranges of the effectiveness of Lagrange multipliers and uses them to determine optimal solution alternatives. Profiles for existing generation and loads, and transmission constraints are taken into consideration. The proposed method is used to determine the impacts of DERs at different locations, in the presence of a stochastic element (load variability). This method consists of sequentially calculating Lagrange multipliers of the dual solution of the optimization problem for various load buses for all load scenarios. Optimal sizes and sites of resources are jointly determined in a sequential manner based on the validity of active constraints. The effectiveness of the proposed method is demonstrated through several case studies on various test systems including the IEEE reliability test system (IEEE RTS), the IEEE 14, and 30 bus systems. In comparison with conventional sensitivity-based approaches (i.e., without considering ranges of validity of Lagrange multipliers), the proposed approach provides more accurate results for active constraints.
△ Less
Submitted 18 August, 2020;
originally announced August 2020.
-
Modeling of Natural Disasters and Extreme Events in Power System Resilience Enhancement and Evaluation Methods
Authors:
Narayan Bhusal,
Mukesh Gautam,
Michael Abdelmalak,
Mohammed Benidris
Abstract:
The frequency of disruptive and newly emerging threats (e.g. man-made attacks--cyber and physical attacks; extreme natural events--hurricanes, earthquakes, and floods) has escalated dramatically in the last decade. Impacts of these events are very severe ranging from long power outage duration, major power system equipment (e.g. power generation plants, transmission and distribution lines, and sub…
▽ More
The frequency of disruptive and newly emerging threats (e.g. man-made attacks--cyber and physical attacks; extreme natural events--hurricanes, earthquakes, and floods) has escalated dramatically in the last decade. Impacts of these events are very severe ranging from long power outage duration, major power system equipment (e.g. power generation plants, transmission and distribution lines, and substation) destruction, and complete blackout. Accurate modeling of these events is vitally important as they serve as mathematical tools for the assessment and evaluation of various operations and planning investment strategies to harden power systems against these events. This paper provides a comprehensive and critical review of current practices in the modeling of extreme events, system components, and system response for resilience evaluation and enhancement, which is a very important step** stone toward the development of complete, accurate, and computationally attractive modeling techniques. The paper starts with reviewing existing technologies to model the propagation of extreme events and then discusses the approaches used to model impacts of these events on power system components and system response. This paper also discusses the research gaps and associated challenges, and potential solutions to the limitations of the existing modeling approaches.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Sizing of Movable Energy Resources for Service Restoration and Reliability Enhancement
Authors:
Narayan Bhusal,
Mukesh Gautam,
Mohammed Benidris
Abstract:
The frequency of extreme events (e.g., hurricanes, earthquakes, and floods) and man-made attacks (cyber and physical attacks) has increased dramatically in recent years. These events have severely impacted power systems ranging from long outage times to major equipment (e.g., substations, transmission lines, power plants, and distribution system) destruction. Distribution system failures and outag…
▽ More
The frequency of extreme events (e.g., hurricanes, earthquakes, and floods) and man-made attacks (cyber and physical attacks) has increased dramatically in recent years. These events have severely impacted power systems ranging from long outage times to major equipment (e.g., substations, transmission lines, power plants, and distribution system) destruction. Distribution system failures and outages are major contributors to power supply interruptions. Network reconfiguration and movable energy resources (MERs) can play a vital role in supplying loads during and after contingencies. This paper proposes a two-stage strategy to determine the minimum sizes of MERs with network reconfiguration for distribution service restoration and supplying local and isolated loads. Sequential Monte Carlo simulations are used to model the outages of distribution system components. After a contingency, the first stage determines the network reconfiguration based on the spanning tree search algorithm. In the second stage, if some system loads cannot be fed by network reconfiguration, MERs are deployed and the optimal routes to reach isolated areas are determined based on the DSPA. The traveling time obtained from the DSPA is incorporated with the proposed sequential Monte Carlo simulation-based approach to determine the sizes of MERs. The proposed method is applied on several distribution systems including the IEEE-13 and IEEE-123 node test feeders. The results show that network reconfiguration can reduce the required sizes of MERs to supply isolated areas.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Cybersecurity of Electric Vehicle Smart Charging Management Systems
Authors:
Narayan Bhusal,
Mukesh Gautam,
Mohammed Benidris
Abstract:
In concept, a smart charging management system (SCMS) optimizes the charging of plug-in vehicles (PEVs) and provides various grid services including voltage control, frequency regulation, peak shaving, renewable energy integration support, spinning reserve, and emergency demand response. These functionalities largely depend upon data collected from various entities such as PEVs, electric vehicle s…
▽ More
In concept, a smart charging management system (SCMS) optimizes the charging of plug-in vehicles (PEVs) and provides various grid services including voltage control, frequency regulation, peak shaving, renewable energy integration support, spinning reserve, and emergency demand response. These functionalities largely depend upon data collected from various entities such as PEVs, electric vehicle supply equipment (EVSE), service providers, and utilities. SCMS can be susceptible to both cyber and physical threats (e.g. man-in-the-middle attack, data intrigued attack, denial of charging, physical-attack) due to interactions of and interdependencies between cyber and physical components. Cyber-physical threats through highly connected malware vectors raise various concerns including public safety hazards to vehicle operators and those in the immediate vicinity as well as disruptions to electric grid operations. This paper describes the concept of SCMS and provides a comprehensive review of the cybersecurity aspects of EVSEs and SCMSs with their possible impacts on the power grid and society. It also contributes to the development of cybersecurity measures to the SCMSs. Various functions of SCMS are reviewed in detail including peak shaving, demand charge reduction, frequency regulation, spinning reserve, renewable integration support, distribution congestion management, reactive power compensation, and emergency demand response with unidirectional PEVs charging. Also, a critical literature survey on current practices of SCMS cybersecurity is provided to explore major impacts and challenges of cyber-physical attacks and to identify research gaps and vulnerabilities in currently available SCMSs technologies.
△ Less
Submitted 17 August, 2020;
originally announced August 2020.
-
Optomechanical entanglement at room temperature: a simulation study with realistic conditions
Authors:
Kahlil Y. Dixon,
Lior Cohen,
Narayan Bhusal,
Christopher Wipf,
Jonathan P. Dowling,
Thomas Corbitt
Abstract:
Quantum entanglement is the key to many applications like quantum key distribution, quantum teleportation, and quantum sensing. However, reliably generating quantum entanglement in macroscopic systems has proved to be a challenge. Here, we present a detailed analysis of ponderomotive entanglement generation which utilizes optomechanical interactions to create quantum correlations. We numerically c…
▽ More
Quantum entanglement is the key to many applications like quantum key distribution, quantum teleportation, and quantum sensing. However, reliably generating quantum entanglement in macroscopic systems has proved to be a challenge. Here, we present a detailed analysis of ponderomotive entanglement generation which utilizes optomechanical interactions to create quantum correlations. We numerically calculate an entanglement measure -- the logarithmic negativity -- for the quantitative assessment of the entanglement. Experimental limitations, including thermal noise and optical loss, from measurements of an existing experiment were included in the calculation, which is intractable to solve analytically. This work will play an important role in the development of ponderomotive entanglement devices.
△ Less
Submitted 22 July, 2020;
originally announced July 2020.
-
Quantum-Limited Squeezed Light Detection with a Camera
Authors:
Elisha S. Matekole,
Savannah L. Cuozzo,
Nikunjkumar Prajapati,
Narayan Bhusal,
Hwang Lee,
Irina Novikova,
Eugeniy E. Mikhailov,
Jonathan P. Dowling,
Lior Cohen
Abstract:
We present a technique for squeezed light detection based on direct imaging of the displaced-squeezed-vacuum state using a CCD camera. We show that the squeezing parameter can be accurately estimated using only the first two moments of the recorded pixel-to-pixel photon fluctuation statistics, with accuracy that rivals that of the standard squeezing detection methods such as a balanced homodyne de…
▽ More
We present a technique for squeezed light detection based on direct imaging of the displaced-squeezed-vacuum state using a CCD camera. We show that the squeezing parameter can be accurately estimated using only the first two moments of the recorded pixel-to-pixel photon fluctuation statistics, with accuracy that rivals that of the standard squeezing detection methods such as a balanced homodyne detection. Finally, we numerically simulate the camera operation, reproducing the noisy experimental results with low signal samplings and confirming the theory with high signal samplings.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Spatial Mode Correction of Single Photons using Machine Learning
Authors:
Narayan Bhusal,
Sanjaya Lohani,
Chenglong You,
Mingyuan Hong,
Joshua Fabre,
Pengcheng Zhao,
Erin M. Knutson,
Ryan T. Glasser,
Omar S. Magana-Loaiza
Abstract:
Spatial modes of light constitute valuable resources for a variety of quantum technologies ranging from quantum communication and quantum imaging to remote sensing. Nevertheless, their vulnerabilities to phase distortions, induced by random media, impose significant limitations on the realistic implementation of numerous quantum-photonic technologies. Unfortunately, this problem is exacerbated at…
▽ More
Spatial modes of light constitute valuable resources for a variety of quantum technologies ranging from quantum communication and quantum imaging to remote sensing. Nevertheless, their vulnerabilities to phase distortions, induced by random media, impose significant limitations on the realistic implementation of numerous quantum-photonic technologies. Unfortunately, this problem is exacerbated at the single-photon level. Over the last two decades, this challenging problem has been tackled through conventional schemes that utilize optical nonlinearities, quantum correlations, and adaptive optics. In this article, we exploit the self-learning and self-evolving features of artificial neural networks to correct the complex spatial profile of distorted Laguerre-Gaussian modes at the single-photon level. Furthermore, we demonstrate the possibility of boosting the performance of an optical communication protocol through the spatial mode correction of single photons using machine learning. Our results have important implications for real-time turbulence correction of structured photons and single-photon images.
△ Less
Submitted 4 September, 2020; v1 submitted 13 June, 2020;
originally announced June 2020.
-
Third Generation Gamma Camera SPECT System
Authors:
Narayan Bhusal
Abstract:
Single Photon Emission Computed Tomography (SPECT) is a non-invasive imaging modality, frequently used in myocardial perfusion imaging. The biggest challenges facing the majority of clinical SPECT systems are low sensitivity, poor resolution, and the relatively high radiation dose to the patient. New generation systems (GE Discovery, DSPECT) dedicated to cardiac imaging improve sensitivity by a fa…
▽ More
Single Photon Emission Computed Tomography (SPECT) is a non-invasive imaging modality, frequently used in myocardial perfusion imaging. The biggest challenges facing the majority of clinical SPECT systems are low sensitivity, poor resolution, and the relatively high radiation dose to the patient. New generation systems (GE Discovery, DSPECT) dedicated to cardiac imaging improve sensitivity by a factor of 5-8. The purpose of this work is to investigate a new gamma camera design with 21 hemi-ellipsoid detectors each with a pinhole collimator for Cardiac SPECT for further improvement in sensitivity, resolution, imaging time, and radiation dose. To evaluate the resolution of our hemi-ellipsoid system, GATE Monte-Carlo simulations were performed on point-sources, rod-sources, and NCAT phantoms. The purpose of point-source simulation is to obtain operating pinhole diameter by comparing the average FWHM (Full width half-maximum) of flat-detector system with curved hemi-ellipsoid detector system. The operating pinhole diameter for the curved hemi-ellipsoid detector was found to be 8.68mm. System resolution is evaluated using reconstructed rod-sources equally spaced within the region of interest. The results were compared with results of GE discovery system available in the literature. The system performance was also evaluated using the mathematical anthropomorphic NCAT (NURBSbased Cardiac Torso) phantom with a full (clinical) dose acquisition (25mCi) for 2 mins and an ultra-low-dose acquisition of 3mCi for 5.44mins.
△ Less
Submitted 27 March, 2021; v1 submitted 25 February, 2020;
originally announced February 2020.
-
Identification of Light Sources using Machine Learning
Authors:
Chenglong You,
Mario A. Quiroz-Juarez,
Aidan Lambert,
Narayan Bhusal,
Chao Dong,
Armando Perez-Leija,
Amir Javaid,
Roberto de J. Leon-Montiel,
Omar S. Magana-Loaiza
Abstract:
The identification of light sources represents a task of utmost importance for the development of multiple photonic technologies. Over the last decades, the identification of light sources as diverse as sunlight, laser radiation and molecule fluorescence has relied on the collection of photon statistics or the implementation of quantum state tomography. In general, this task requires an extensive…
▽ More
The identification of light sources represents a task of utmost importance for the development of multiple photonic technologies. Over the last decades, the identification of light sources as diverse as sunlight, laser radiation and molecule fluorescence has relied on the collection of photon statistics or the implementation of quantum state tomography. In general, this task requires an extensive number of measurements to unveil the characteristic statistical fluctuations and correlation properties of light, particularly in the low-photon flux regime. In this article, we exploit the self-learning features of artificial neural networks and naive Bayes classifier to dramatically reduce the number of measurements required to discriminate thermal light from coherent light at the single-photon level. We demonstrate robust light identification with tens of measurements at mean photon numbers below one. Our work demonstrates an improvement in terms of the number of measurements of several orders of magnitude with respect to conventional schemes for characterization of light sources. Our work has important implications for multiple photonic technologies such as LIDAR and microscopy.
△ Less
Submitted 23 October, 2019; v1 submitted 17 September, 2019;
originally announced September 2019.
