-
Development of a thorium coating on an aluminium substrate by using electrodeposition method and alpha spectroscopy
Authors:
Dal-Ho Moon,
Vivek Chavan,
Vasant Bhoraskar,
Yeong Hoon Jeong,
Jung Ho Park,
Su-Jeong Suh,
Seung-Woo Hong
Abstract:
A thin coating of thorium on aluminium substrates with the areal density of 110 to 130 $μg/cm^2$ is developed over a circular area of 22 mm diameter by using the electrodeposition method. An electrodeposition system is fabricated to consist of three components; an anode made of a platinum mesh, a cylindrical-shape vessel to contain the thorium solution, and a cathode in the form of a circular alum…
▽ More
A thin coating of thorium on aluminium substrates with the areal density of 110 to 130 $μg/cm^2$ is developed over a circular area of 22 mm diameter by using the electrodeposition method. An electrodeposition system is fabricated to consist of three components; an anode made of a platinum mesh, a cylindrical-shape vessel to contain the thorium solution, and a cathode in the form of a circular aluminium plate. The aluminium plate is mounted horizontally, and the platinum mesh is connected to an axial rod of an electric motor, mounted vertically and normal to the plane of the aluminium. The electrolyte solution is prepared by dissolving a known-weight thorium nitrate powder in 0.8 M HNO3 and isopropanol. The system is operated either in constant voltage (CV) or constant current (CC) mode. Under the electric field between the anode and cathode, thorium ions were deposited on the aluminium substrate mounted on the cathode. In the CV mode at 320, 360, and 400 V and in the CC mode at 15 mA, thorium films were formed over a circular area of the aluminium substrate. The areal density of thorium coating was measured by detecting emitted alpha particles. The areal density of thorium varied from 80 to 130 $μg/cm^2$ by changing the deposition time from 10 to 60 min. The results from the CV mode and CC mode are compared, and the radial dependence in the measured areal density is discussed for different modes of the electric field. The developed thorium coatings are to be used in the in-house development of particle detectors, fast neutron converters, targets for thorium fission experiments, and other purposes.
△ Less
Submitted 11 March, 2023;
originally announced March 2023.
-
Tailored conversion of synthetic graphite into rotationally misoriented few-layer graphene by a cold thermal shock
Authors:
Soumen Karmakar,
Ashok B. Nawale,
Nilesh S. Kanhe,
Vasant G. Sathe,
Vikas L. Mathe,
Sudha V. Bhoraskar
Abstract:
Following the discovery of graphene, keen attentions have been paid in comprehending the noticeably superior electromagnetic, optical and absorptive properties of few layer graphene (FLG) with rotational-stacking-faults. With achieving intense fundamental interests, the demands to synthesize such FLG are rapidly increasing. However, the potential applications of such FLG, especially in composite s…
▽ More
Following the discovery of graphene, keen attentions have been paid in comprehending the noticeably superior electromagnetic, optical and absorptive properties of few layer graphene (FLG) with rotational-stacking-faults. With achieving intense fundamental interests, the demands to synthesize such FLG are rapidly increasing. However, the potential applications of such FLG, especially in composite science and energy storage devices, are practically hindered because of non-fulfillment of required production rate. Additionally, synthesis of such FLG with controlled layer-numbers still remains an unsolved challenge. Further breakthroughs in this direction are thus highly desirable. The present article is a step ahead in this direction and is possibly the first of its kind. Here we show how such FLG, with precisely controlled number of layers, can readily be obtained from an isostatically compacted synthetic graphite, by controlled dynamic fracture, with microbranching instability, induced by cold-thermal-shock and discovered the mechanism behind such transformation by a theoretical modeling.
△ Less
Submitted 31 July, 2013; v1 submitted 8 July, 2013;
originally announced July 2013.
-
Gas phase condensation of few-layer graphene with rotational stacking faults in an electric-arc
Authors:
Soumen Karmakar,
Ashok B. Nawale,
Niranjan P. Lalla,
Vasant G. Sathe,
Vikas L. Mathe,
Asoka K. Das,
Sudha V. Bhoraskar
Abstract:
We report the synthesis efficiency of few-layer graphene (FLG) in an external magnetic field modulated DC carbon arc in different non-reactive buffer gases. The effects of buffer gases on the anode erosion rate and the cathode deposit (CD) formation rate have been investigated during the synthesis of FLG. The constituents of the as-synthesized CDs were investigated using transmission electron micr…
▽ More
We report the synthesis efficiency of few-layer graphene (FLG) in an external magnetic field modulated DC carbon arc in different non-reactive buffer gases. The effects of buffer gases on the anode erosion rate and the cathode deposit (CD) formation rate have been investigated during the synthesis of FLG. The constituents of the as-synthesized CDs were investigated using transmission electron microscopy, selected area electron diffraction, Raman spectroscopy and X-ray diffraction analysis. A plausible growth mechanism of such FLG is predicted. The results indicate that, under a parametrically optimized condition, an electric-arc of this kind can efficiently generate FLG with rotational stacking faults at a production-rate of few g/min. A guideline for controlling the number of layers of such FLG has also been suggested.
△ Less
Submitted 12 August, 2012;
originally announced August 2012.
-
A novel approach towards selective bulk synthesis of delaminated graphenes in an electric arc
Authors:
Soumen Karmakar,
Naveen V Kulkarni,
Ashok B Nawale,
Niranjan P Lalla,
R Mishra,
V G Sathe,
S V Bhoraskar,
A K Das
Abstract:
Here we demonstrate the selective bulk scale synthesis of delaminated graphene sheets by a proper choice of magnetic field modulating an electric-arc. An ultra-high purity glassy graphite anode was sublimated in an argon atmosphere. Carbon nanotubes, as well as graphene sheets were found inside the deposit formed on the cathode. Both the high purity carbon nanotubes as well as graphene sheets, w…
▽ More
Here we demonstrate the selective bulk scale synthesis of delaminated graphene sheets by a proper choice of magnetic field modulating an electric-arc. An ultra-high purity glassy graphite anode was sublimated in an argon atmosphere. Carbon nanotubes, as well as graphene sheets were found inside the deposit formed on the cathode. Both the high purity carbon nanotubes as well as graphene sheets, with minimal structural defects, were synthesized separately by varying the strength and orientation of the external magnetic field generated by arrays of permanent magnets. The as-synthesized carbonaceous samples were characterized with the help of transmission electron microscopy, selected area electron diffraction, Raman spectroscopy and thermogravimetry for optimizing the highest selective production of delaminated graphenes. This optimization was done by varying the strength and orientation of the external magnetic field.
The as-synthesized graphene sheets exhibited relatively high degree of graphitization and low structural defect density as confirmed by RS. They were found to exhibit higher oxidation temperature than that of the carbon nanocrystalline particles as inferred from the thermogravimatric analysis. Moreover, they were found to form scroll-like carbon nanotubes at their edges on account of their surface energy minimization. This was confirmed by the selected area electron diffraction analysis. With this new technique, we could successfully synthesize delaminated graphenes at a rate of few grams per hour.
△ Less
Submitted 21 October, 2008;
originally announced October 2008.
-
DC transferred arc thermal plasma assisted growth of nanoparticles with different crystalline phases
Authors:
Naveen V. Kulkarni,
Soumen Karmakar,
Indrani Banerjee,
R. Pasricha,
S. N. Sahasrabudhe,
A. K. Das,
S. V. Bhoraskar
Abstract:
The control of the crystalline phases of the nanoparticles grown in a direct-current transferred-arc plasma-assisted reactor is reported. The crystalline phases of the as synthesized nanoparticles are shown to critically depend on the operating gas pressure. The paper reports about the change in the crystalline phases of three distinct compounds namely aluminium oxide (Al2O3), aluminium nitride…
▽ More
The control of the crystalline phases of the nanoparticles grown in a direct-current transferred-arc plasma-assisted reactor is reported. The crystalline phases of the as synthesized nanoparticles are shown to critically depend on the operating gas pressure. The paper reports about the change in the crystalline phases of three distinct compounds namely aluminium oxide (Al2O3), aluminium nitride (AlN) and iron oxide (FexOy). The major outcome of the present work is that the phases having higher defect densities are more probable to form at the sub-atmospheric operating pressure. The variations in the crystalline structures are discussed on the basis of the equilibrium defect density formed during the homogeneous nucleation. The as synthesized nanoparticles were examined by X-ray diffraction analysis and transmission electron microscopy. In addition, the confirmatory analysis for the crystalline phases of the as synthesized iron oxides was carried out with the help of Mossbauer spectroscopy.
△ Less
Submitted 7 January, 2008;
originally announced January 2008.
-
AC conductivity of polymer composites: an efficient confirmatory tool for qualifying crude multi-walled carbon nanotube-samples
Authors:
Soumen Karmakar,
Harshada Nagar,
J P Jog,
S V Bhoraskar,
A K Das
Abstract:
The present communication highlights that ac conductivity measurement of the multi-walled carbon nanotubes (MWNTs)-polymer composites is a very promising characterizing tool for qualifying any crude MWNT-sample synthesized by electric arc. It distinguishes graphite structures from that of the MWNTs and reflects the relative amount of nearly one-dimensional structures and disorders present within…
▽ More
The present communication highlights that ac conductivity measurement of the multi-walled carbon nanotubes (MWNTs)-polymer composites is a very promising characterizing tool for qualifying any crude MWNT-sample synthesized by electric arc. It distinguishes graphite structures from that of the MWNTs and reflects the relative amount of nearly one-dimensional structures and disorders present within the samples. This new protocol would help in evolving more direct and quantitative criteria for qualification of MWNTs synthesized through diverse techniques and will definitely add up to the conceptual understanding in visualizing the exact roles of different controlling parameters affecting the growth of MWNTs.
△ Less
Submitted 25 September, 2007;
originally announced September 2007.
-
Applications of nanoparticles of gamma Fe2O3 for hyperthermia in E.coli by Nd:YAG laser
Authors:
Srikanya Kundu,
Harshada Nagar,
S D Kulkarni,
Renu Pasricha,
A K Das,
G R Kulkarni,
S V Bhoraskar
Abstract:
The paper explores the use of nanoparticles of gamma Fe2O3 for hyperthermia treatment of living organisms by absorption of 1064 nm radiations from Nd:YAG laser. Escherichia coli cells have been used as the model system for demonstrating the effect wherein lysine is used as an interface between the cell walls and the nanoparticles. Scanning Electron Microscopic observations have, exclusively, pro…
▽ More
The paper explores the use of nanoparticles of gamma Fe2O3 for hyperthermia treatment of living organisms by absorption of 1064 nm radiations from Nd:YAG laser. Escherichia coli cells have been used as the model system for demonstrating the effect wherein lysine is used as an interface between the cell walls and the nanoparticles. Scanning Electron Microscopic observations have, exclusively, proved that attachment of nanoparticles of iron oxide along with lysine alone is responsible for absorption of above radiations. The quantitative estimation has been provided by growth rate measurements and protein assessment of the cells. The nanoparticles of gamma Fe2O3 were synthesized by DC arc plasma assisted gas phase condensation.
△ Less
Submitted 17 May, 2007;
originally announced May 2007.
-
ECR Plasma assisted deposition of zinc nanowires
Authors:
Vishwas S. Purohit,
Manish Shinde,
Shirshendu Dey,
Renu Pasricha,
C. V. Dharmadhikari,
Tanay Seth,
S. V. Bhoraskar
Abstract:
Deposits of one-dimensional nanostructures of zinc with diameters of 90-120 nm have been obtained by means of sputtering in an Electron Cyclotron Resonance (ECR) plasma reactor. The sputtering has been made effective by using a negatively biased cylindrical target in a hollow cathode geometry. The nanocrystalline films deposited on the glass substrate were studied with scanning tunneling microsc…
▽ More
Deposits of one-dimensional nanostructures of zinc with diameters of 90-120 nm have been obtained by means of sputtering in an Electron Cyclotron Resonance (ECR) plasma reactor. The sputtering has been made effective by using a negatively biased cylindrical target in a hollow cathode geometry. The nanocrystalline films deposited on the glass substrate were studied with scanning tunneling microscopy/spectroscopy and was found to consist of nanowires having metallic nature. The crystalline nature of these metallic nanowires was studied with x-ray diffraction analysis.
△ Less
Submitted 9 October, 2006; v1 submitted 9 October, 2006;
originally announced October 2006.
-
High yield production of defect less carbon nanotubes in an arc process
Authors:
Soumen Karmakar,
Naveen V. Kulkarni,
V. G. Sathe,
A. K. Shrivastava,
M. D. Shinde,
S. V. Bhoraskar,
A. K. Das
Abstract:
An efficient modified arc plasma method, where a focusing electric field is superimposed on the arc electric field, is optimized for the bulk generation of highly pure multi-walled carbon nanotubes. Raman spectroscopy and thermogravimetric measurements have been used to optimize the process.
An efficient modified arc plasma method, where a focusing electric field is superimposed on the arc electric field, is optimized for the bulk generation of highly pure multi-walled carbon nanotubes. Raman spectroscopy and thermogravimetric measurements have been used to optimize the process.
△ Less
Submitted 27 February, 2007; v1 submitted 4 August, 2006;
originally announced August 2006.