-
Use of BNNM for interference wave solutions of the gBS-like equation and comparison with PINNs
Authors:
Shashank Reddy Vadyala,
Sai Nethra Betgeri
Abstract:
In this work, the generalized broken soliton-like (gBS-like) equation is derived through the generalized bilinear method. The neural network model, which can fit the explicit solution with zero error, is found. The interference wave solution of the gBS-like equation is obtained by using the bilinear neural network method (BNNM) and physical informed neural networks (PINNs). Interference waves are…
▽ More
In this work, the generalized broken soliton-like (gBS-like) equation is derived through the generalized bilinear method. The neural network model, which can fit the explicit solution with zero error, is found. The interference wave solution of the gBS-like equation is obtained by using the bilinear neural network method (BNNM) and physical informed neural networks (PINNs). Interference waves are shown well via three-dimensional plots and density plots. Compared with PINNs, the bilinear neural network method is not only more accurate but also faster.
△ Less
Submitted 25 October, 2022; v1 submitted 7 August, 2022;
originally announced October 2022.
-
Wastewater Pipe Rating Model Using Natural Language Processing
Authors:
Sai Nethra Betgeri,
Shashank Reddy Vadyala,
Dr. John C. Mattews,
Dr. Hongfang Lu
Abstract:
Closed-circuit video (CCTV) inspection has been the most popular technique for visually evaluating the interior status of pipelines in recent decades. Certified inspectors prepare the pipe repair document based on the CCTV inspection. The traditional manual method of assessing sewage structural conditions from pipe repair documents takes a long time and is prone to human mistakes. The automatic id…
▽ More
Closed-circuit video (CCTV) inspection has been the most popular technique for visually evaluating the interior status of pipelines in recent decades. Certified inspectors prepare the pipe repair document based on the CCTV inspection. The traditional manual method of assessing sewage structural conditions from pipe repair documents takes a long time and is prone to human mistakes. The automatic identification of necessary texts has received little attention. By building an automated framework employing Natural Language Processing (NLP), this study presents an effective technique to automate the identification of the pipe defect rating of the pipe repair documents. NLP technologies are employed to break down textual material into grammatical units in this research. Further analysis entails using words to discover pipe defect symptoms and their frequency and then combining that information into a single score. Our model achieves 95.0% accuracy,94.9% sensitivity, 94.4% specificity, 95.9% precision score, and 95.7% F1 score, showing the potential of the proposed model to be used in large-scale pipe repair documents for accurate and efficient pipeline failure detection to improve the quality of the pipeline. Keywords: Sewer pipe inspection, Defect detection, Natural language processing, Text recognition
△ Less
Submitted 24 December, 2022; v1 submitted 22 February, 2022;
originally announced February 2022.
-
Wastewater Pipe Condition Rating Model Using K- Nearest Neighbors
Authors:
Sai Nethra Betgeri,
Shashank Reddy Vadyala,
John C. Matthews,
Mahboubeh Madadi,
Greta Vladeanu
Abstract:
Risk-based assessment in pipe condition mainly focuses on prioritizing the most critical assets by evaluating the risk of pipe failure. This paper's goal is to classify a comprehensive pipe rating model which is obtained based on a series of pipe physical, external, and hydraulic characteristics that are identified for the proposed methodology. The traditional manual method of assessing sewage str…
▽ More
Risk-based assessment in pipe condition mainly focuses on prioritizing the most critical assets by evaluating the risk of pipe failure. This paper's goal is to classify a comprehensive pipe rating model which is obtained based on a series of pipe physical, external, and hydraulic characteristics that are identified for the proposed methodology. The traditional manual method of assessing sewage structural conditions takes a long time. By building an automated process using K-Nearest Neighbors (K-NN), this study presents an effective technique to automate the identification of the pipe defect rating using the pipe repair data. First, we performed the Shapiro Wilks Test for 1240 data from the Dept. of Engineering & Environmental Services, Shreveport, Louisiana Phase 3 with 12 variables to determine if factors could be incorporated in the final rating. We then developed a K-Nearest Neighbors model to classify the final rating from the statistically significant factors identified in Shapiro Wilks Test. This classification process allows recognizing the worst condition of wastewater pipes that need to be replaced immediately. This comprehensive model is built according to the industry-accepted and used guidelines to estimate the overall condition. Finally, for validation purposes, the proposed model is applied to a small portion of a US wastewater collection system in Shreveport, Louisiana. Keywords: Pipe rating, Shapiro Wilks Test, K-Nearest Neighbors (KNN), Failure, Risk analysis
△ Less
Submitted 22 February, 2022;
originally announced February 2022.
-
Predicting the spread of COVID-19 in Delhi, India using Deep Residual Recurrent Neural Networks
Authors:
Shashank Reddy Vadyala,
Sai Nethra Betgeri
Abstract:
Detecting the spread of coronavirus will go a long way toward reducing human and economic loss. Unfortunately, existing Epidemiological models used for COVID 19 prediction models are too slow and fail to capture the COVID-19 development in detail. This research uses Partial Differential Equations to improve the processing speed and accuracy of forecasting of COVID 19 governed by SEIRD model equati…
▽ More
Detecting the spread of coronavirus will go a long way toward reducing human and economic loss. Unfortunately, existing Epidemiological models used for COVID 19 prediction models are too slow and fail to capture the COVID-19 development in detail. This research uses Partial Differential Equations to improve the processing speed and accuracy of forecasting of COVID 19 governed by SEIRD model equations. The dynamics of COVID 19 were extracted using Convolutional Neural Networks and Deep Residual Recurrent Neural Networks from data simulated using PDEs. The DRRNNs accuracy is measured using Mean Squared Error. The DRRNNs COVID-19 prediction model has been shown to have accurate COVID-19 predictions. In addition, we concluded that DR-RNNs can significantly advance the ability to support decision-making in real time COVID-19 prediction.
△ Less
Submitted 9 October, 2021;
originally announced October 2021.
-
Physics-Informed Neural Network Method for Solving One-Dimensional Advection Equation Using PyTorch
Authors:
Shashank Reddy Vadyala,
Sai Nethra Betgeri
Abstract:
Numerical solutions to the equation for advection are determined using different finite-difference approximations and physics-informed neural networks (PINNs) under conditions that allow an analytical solution. Their accuracy is examined by comparing them to the analytical solution. We used a machine learning framework like PyTorch to implement PINNs. PINNs approach allows training neural networks…
▽ More
Numerical solutions to the equation for advection are determined using different finite-difference approximations and physics-informed neural networks (PINNs) under conditions that allow an analytical solution. Their accuracy is examined by comparing them to the analytical solution. We used a machine learning framework like PyTorch to implement PINNs. PINNs approach allows training neural networks while respecting the PDEs as a strong constraint in the optimization as apposed to making them part of the loss function. In standard small-scale circulation simulations, it is shown that the conventional approach incorporates a pseudo diffusive effect that is almost as large as the effect of the turbulent diffusion model; hence the numerical solution is rendered inconsistent with the PDEs. This oscillation causes inaccuracy and computational uncertainty. Of all the schemes tested, only the PINNs approximation accurately predicted the outcome. We assume that the PINNs approach can transform the physics simulation area by allowing real-time physics simulation and geometry optimization without costly and time-consuming simulations on large supercomputers.
△ Less
Submitted 21 March, 2021; v1 submitted 15 March, 2021;
originally announced March 2021.
-
Prediction of the Number of COVID-19 Confirmed Cases Based on K-Means-LSTM
Authors:
Shashank Reddy Vadyala,
Sai Nethra Betgeri,
Eric A. Sherer,
Amod Amritphale
Abstract:
COVID-19 is a pandemic disease that began to rapidly spread in the US with the first case detected on January 19, 2020, in Washington State. March 9, 2020, and then increased rapidly with total cases of 25,739 as of April 20, 2020. The Covid-19 pandemic is so unnerving that it is difficult to understand how any person is affected by the virus. Although most people with coronavirus 81%, according t…
▽ More
COVID-19 is a pandemic disease that began to rapidly spread in the US with the first case detected on January 19, 2020, in Washington State. March 9, 2020, and then increased rapidly with total cases of 25,739 as of April 20, 2020. The Covid-19 pandemic is so unnerving that it is difficult to understand how any person is affected by the virus. Although most people with coronavirus 81%, according to the U.S. Centers for Disease Control and Prevention (CDC), will have little to mild symptoms, others may rely on a ventilator to breathe or not at all. SEIR models have broad applicability in predicting the outcome of the population with a variety of diseases. However, many researchers use these models without validating the necessary hypotheses. Far too many researchers often "overfit" the data by using too many predictor variables and small sample sizes to create models. Models thus developed are unlikely to stand validity check on a separate group of population and regions. The researcher remains unaware that overfitting has occurred, without attempting such validation. In the paper, we present a combination algorithm that combines similar days features selection based on the region using Xgboost, K Means, and long short-term memory (LSTM) neural networks to construct a prediction model (i.e., K-Means-LSTM) for short-term COVID-19 cases forecasting in Louisana state USA. The weighted k-means algorithm based on extreme gradient boosting is used to evaluate the similarity between the forecasts and past days. The results show that the method with K-Means-LSTM has a higher accuracy with an RMSE of 601.20 whereas the SEIR model with an RMSE of 3615.83.
△ Less
Submitted 25 June, 2020;
originally announced June 2020.