-
Improved Parameter Targeting in 3D-Integrated Superconducting Circuits through a Polymer Spacer Process
Authors:
Graham J. Norris,
Laurent Michaud,
David Pahl,
Michael Kerschbaum,
Christopher Eichler,
Jean-Claude Besse,
Andreas Wallraff
Abstract:
Three-dimensional device integration facilitates the construction of superconducting quantum information processors with more than several tens of qubits by distributing elements such as control wires, qubits, and resonators between multiple layers. The frequencies of resonators and qubits in flip-chip-bonded multi-chip modules depend on the details of their electromagnetic environment defined by…
▽ More
Three-dimensional device integration facilitates the construction of superconducting quantum information processors with more than several tens of qubits by distributing elements such as control wires, qubits, and resonators between multiple layers. The frequencies of resonators and qubits in flip-chip-bonded multi-chip modules depend on the details of their electromagnetic environment defined by the conductors and dielectrics in their vicinity. Accurate frequency targeting therefore requires precise control of the separation between chips and minimization of their relative tilt. Here, we describe a method to control the inter-chip separation by using polymer spacers. Compared to an identical process without spacers, we reduce the measured planarity error by a factor of 3.5, to a mean tilt of 76(35) $μ$rad, and the deviation from the target inter-chip separation by a factor of ten, to a mean of 0.4(8) $μ$m. We apply this process to coplanar waveguide resonator samples and observe chip-to-chip resonator frequency variations below 50 MHz ($\approx$ 1 %). We measure internal quality factors of $5 \times 10^5$ at the single-photon level, suggesting that the added spacers are compatible with low-loss device fabrication.
△ Less
Submitted 30 June, 2023;
originally announced July 2023.
-
Calibration of Drive Non-Linearity for Arbitrary-Angle Single-Qubit Gates Using Error Amplification
Authors:
Stefania Lazăr,
Quentin Ficheux,
Johannes Herrmann,
Ants Remm,
Nathan Lacroix,
Christoph Hellings,
Francois Swiadek,
Dante Colao Zanuz,
Graham J. Norris,
Mohsen Bahrami Panah,
Alexander Flasby,
Michael Kerschbaum,
Jean-Claude Besse,
Christopher Eichler,
Andreas Wallraff
Abstract:
The ability to execute high-fidelity operations is crucial to scaling up quantum devices to large numbers of qubits. However, signal distortions originating from non-linear components in the control lines can limit the performance of single-qubit gates. In this work, we use a measurement based on error amplification to characterize and correct the small single-qubit rotation errors originating fro…
▽ More
The ability to execute high-fidelity operations is crucial to scaling up quantum devices to large numbers of qubits. However, signal distortions originating from non-linear components in the control lines can limit the performance of single-qubit gates. In this work, we use a measurement based on error amplification to characterize and correct the small single-qubit rotation errors originating from the non-linear scaling of the qubit drive rate with the amplitude of the programmed pulse. With our hardware, and for a 15-ns pulse, the rotation angles deviate by up to several degrees from a linear model. Using purity benchmarking, we find that control errors reach $2\times 10^{-4}$, which accounts for half of the total gate error. Using cross-entropy benchmarking, we demonstrate arbitrary-angle single-qubit gates with coherence-limited errors of $2\times 10^{-4}$ and leakage below $6\times 10^{-5}$. While the exact magnitude of these errors is specific to our setup, the presented method is applicable to any source of non-linearity. Our work shows that the non-linearity of qubit drive line components imposes a limit on the fidelity of single-qubit gates, independent of improvements in coherence times, circuit design, or leakage mitigation when not corrected for.
△ Less
Submitted 2 December, 2022;
originally announced December 2022.
-
Realizing a deep reinforcement learning agent discovering real-time feedback control strategies for a quantum system
Authors:
Kevin Reuer,
Jonas Landgraf,
Thomas Fösel,
James O'Sullivan,
Liberto Beltrán,
Abdulkadir Akin,
Graham J. Norris,
Ants Remm,
Michael Kerschbaum,
Jean-Claude Besse,
Florian Marquardt,
Andreas Wallraff,
Christopher Eichler
Abstract:
To realize the full potential of quantum technologies, finding good strategies to control quantum information processing devices in real time becomes increasingly important. Usually these strategies require a precise understanding of the device itself, which is generally not available. Model-free reinforcement learning circumvents this need by discovering control strategies from scratch without re…
▽ More
To realize the full potential of quantum technologies, finding good strategies to control quantum information processing devices in real time becomes increasingly important. Usually these strategies require a precise understanding of the device itself, which is generally not available. Model-free reinforcement learning circumvents this need by discovering control strategies from scratch without relying on an accurate description of the quantum system. Furthermore, important tasks like state preparation, gate teleportation and error correction need feedback at time scales much shorter than the coherence time, which for superconducting circuits is in the microsecond range. Develo** and training a deep reinforcement learning agent able to operate in this real-time feedback regime has been an open challenge. Here, we have implemented such an agent in the form of a latency-optimized deep neural network on a field-programmable gate array (FPGA). We demonstrate its use to efficiently initialize a superconducting qubit into a target state. To train the agent, we use model-free reinforcement learning that is based solely on measurement data. We study the agent's performance for strong and weak measurements, and for three-level readout, and compare with simple strategies based on thresholding. This demonstration motivates further research towards adoption of reinforcement learning for real-time feedback control of quantum devices and more generally any physical system requiring learnable low-latency feedback control.
△ Less
Submitted 29 October, 2022;
originally announced October 2022.
-
Magnetic imaging of superconducting qubit devices with scanning SQUID-on-tip
Authors:
E. Marchiori,
L. Ceccarelli,
N. Rossi,
G. Romagnoli,
J. Herrmann,
J. -C. Besse,
S. Krinner,
A. Wallraff,
M. Poggio
Abstract:
We use a scanning superconducting quantum interference device (SQUID) to image the magnetic flux produced by a superconducting device designed for quantum computing. The nanometer-scale SQUID-on-tip probe reveals the flow of superconducting current through the circuit as well as the locations of trapped magnetic flux. In particular, maps of current flowing out of a flux-control line in the vicinit…
▽ More
We use a scanning superconducting quantum interference device (SQUID) to image the magnetic flux produced by a superconducting device designed for quantum computing. The nanometer-scale SQUID-on-tip probe reveals the flow of superconducting current through the circuit as well as the locations of trapped magnetic flux. In particular, maps of current flowing out of a flux-control line in the vicinity of a qubit show how these elements are coupled, providing insight on how to optimize qubit control.
△ Less
Submitted 16 June, 2022;
originally announced June 2022.
-
Realization of a Universal Quantum Gate Set for Itinerant Microwave Photons
Authors:
Kevin Reuer,
Jean-Claude Besse,
Lucien Wernli,
Paul Magnard,
Philipp Kurpiers,
Graham J. Norris,
Andreas Wallraff,
Christopher Eichler
Abstract:
Deterministic photon-photon gates enable the controlled generation of entanglement between mobile carriers of quantum information. Such gates have thus far been exclusively realized in the optical domain and by relying on post-selection. Here, we present a non-post-selected, deterministic, photon-photon gate in the microwave frequency range realized using superconducting circuits. We emit photonic…
▽ More
Deterministic photon-photon gates enable the controlled generation of entanglement between mobile carriers of quantum information. Such gates have thus far been exclusively realized in the optical domain and by relying on post-selection. Here, we present a non-post-selected, deterministic, photon-photon gate in the microwave frequency range realized using superconducting circuits. We emit photonic qubits from a source chip and route those qubits to a gate chip with which we realize a universal gate set by combining controlled absorption and re-emission with single-qubit gates and qubit-photon controlled-phase gates. We measure quantum process fidelities of $75\,\%$ for single- and of $57\,\%$ for two-qubit gates, limited mainly by radiation loss and decoherence. This universal gate set has a wide range of potential applications in superconducting quantum networks.
△ Less
Submitted 7 June, 2021;
originally announced June 2021.
-
Microwave Quantum Link between Superconducting Circuits Housed in Spatially Separated Cryogenic Systems
Authors:
Paul Magnard,
Simon Storz,
Philipp Kurpiers,
Josua Schär,
Fabian Marxer,
Janis Lütolf,
Jean-Claude Besse,
Mihai Gabureac,
Kevin Reuer,
Abdulkadir Akin,
Baptiste Royer,
Alexandre Blais,
Andreas Wallraff
Abstract:
Superconducting circuits are a strong contender for realizing quantum computing systems, and are also successfully used to study quantum optics and hybrid quantum systems. However, their cryogenic operation temperatures and the current lack of coherence-preserving microwave-to-optical conversion solutions have hindered the realization of superconducting quantum networks either spanning different c…
▽ More
Superconducting circuits are a strong contender for realizing quantum computing systems, and are also successfully used to study quantum optics and hybrid quantum systems. However, their cryogenic operation temperatures and the current lack of coherence-preserving microwave-to-optical conversion solutions have hindered the realization of superconducting quantum networks either spanning different cryogenics systems or larger distances. Here, we report the successful operation of a cryogenic waveguide coherently linking transmon qubits located in two dilution refrigerators separated by a physical distance of five meters. We transfer qubit states and generate entanglement on-demand with average transfer and target state fidelities of 85.8 % and 79.5 %, respectively, between the two nodes of this elementary network. Cryogenic microwave links do provide an opportunity to scale up systems for quantum computing and create local area quantum communication networks over length scales of at least tens of meters.
△ Less
Submitted 4 August, 2020;
originally announced August 2020.
-
Demonstration of an All-Microwave Controlled-Phase Gate between Far Detuned Qubits
Authors:
S. Krinner,
P. Kurpiers,
B. Royer,
P. Magnard,
I. Tsitsilin,
J. -C. Besse,
A. Remm,
A. Blais,
A. Wallraff
Abstract:
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and…
▽ More
A challenge in building large-scale superconducting quantum processors is to find the right balance between coherence, qubit addressability, qubit-qubit coupling strength, circuit complexity and the number of required control lines. Leading all-microwave approaches for coupling two qubits require comparatively few control lines and benefit from high coherence but suffer from frequency crowding and limited addressability in multi-qubit settings. Here, we overcome these limitations by realizing an all-microwave controlled-phase gate between two transversely coupled transmon qubits which are far detuned compared to the qubit anharmonicity. The gate is activated by applying a single, strong microwave tone to one of the qubits, inducing a coupling between the two-qubit $|f,g\rangle$ and $|g,e\rangle$ states, with $|g\rangle$, $|e\rangle$, and $|f\rangle$ denoting the lowest energy states of a transmon qubit. Interleaved randomized benchmarking yields a gate fidelity of $97.5\pm 0.3 \%$ at a gate duration of $126\,\rm{ns}$, with the dominant error source being decoherence. We model the gate in presence of the strong drive field using Floquet theory and find good agreement with our data. Our gate constitutes a promising alternative to present two-qubit gates and could have hardware scaling advantages in large-scale quantum processors as it neither requires additional drive lines nor tunable couplers.
△ Less
Submitted 18 June, 2020;
originally announced June 2020.
-
Implementation of Conditional-Phase Gates based on tunable ZZ-Interactions
Authors:
Michele C. Collodo,
Johannes Herrmann,
Nathan Lacroix,
Christian Kraglund Andersen,
Ants Remm,
Stefania Lazar,
Jean-Claude Besse,
Theo Walter,
Andreas Wallraff,
Christopher Eichler
Abstract:
High fidelity two-qubit gates exhibiting low crosstalk are essential building blocks for gate-based quantum information processing. In superconducting circuits two-qubit gates are typically based either on RF-controlled interactions or on the in-situ tunability of qubit frequencies. Here, we present an alternative approach using a tunable cross-Kerr-type ZZ-interaction between two qubits, which we…
▽ More
High fidelity two-qubit gates exhibiting low crosstalk are essential building blocks for gate-based quantum information processing. In superconducting circuits two-qubit gates are typically based either on RF-controlled interactions or on the in-situ tunability of qubit frequencies. Here, we present an alternative approach using a tunable cross-Kerr-type ZZ-interaction between two qubits, which we realize by a flux-tunable coupler element. We control the ZZ-coupling rate over three orders of magnitude to perform a rapid (38 ns), high-contrast, low leakage (0.14 %) conditional-phase CZ gate with a fidelity of 97.9 % without relying on the resonant interaction with a non-computational state. Furthermore, by exploiting the direct nature of the ZZ-coupling, we easily access the entire conditional-phase gate family by adjusting only a single control parameter.
△ Less
Submitted 18 May, 2020;
originally announced May 2020.
-
Realizing a Deterministic Source of Multipartite-Entangled Photonic Qubits
Authors:
Jean-Claude Besse,
Kevin Reuer,
Michele C. Collodo,
Arne Wulff,
Lucien Wernli,
Adrian Copetudo,
Daniel Malz,
Paul Magnard,
Abdulkadir Akin,
Mihai Gabureac,
Graham J. Norris,
J. Ignacio Cirac,
Andreas Wallraff,
Christopher Eichler
Abstract:
Sources of entangled electromagnetic radiation are a cornerstone in quantum information processing and offer unique opportunities for the study of quantum many-body physics in a controlled experimental setting. While multi-mode entangled states of radiation have been generated in various platforms, all previous experiments are either probabilistic or restricted to generate specific types of states…
▽ More
Sources of entangled electromagnetic radiation are a cornerstone in quantum information processing and offer unique opportunities for the study of quantum many-body physics in a controlled experimental setting. While multi-mode entangled states of radiation have been generated in various platforms, all previous experiments are either probabilistic or restricted to generate specific types of states with a moderate entanglement length. Here, we demonstrate the fully deterministic generation of purely photonic entangled states such as the cluster, GHZ, and W state by sequentially emitting microwave photons from a controlled auxiliary system into a waveguide. We tomographically reconstruct the entire quantum many-body state for up to $N=4$ photonic modes and infer the quantum state for even larger $N$ from process tomography. We estimate that localizable entanglement persists over a distance of approximately ten photonic qubits, outperforming any previous deterministic scheme.
△ Less
Submitted 14 May, 2020;
originally announced May 2020.
-
Primary thermometry of propagating microwaves in the quantum regime
Authors:
Marco Scigliuzzo,
Andreas Bengtsson,
Jean-Claude Besse,
Andreas Wallraff,
Per Delsing,
Simone Gasparinetti
Abstract:
The ability to control and measure the temperature of propagating microwave modes down to very low temperatures is indispensable for quantum information processing, and may open opportunities for studies of heat transport at the nanoscale, also in the quantum regime. Here we propose and experimentally demonstrate primary thermometry of propagating microwaves using a transmon-type superconducting c…
▽ More
The ability to control and measure the temperature of propagating microwave modes down to very low temperatures is indispensable for quantum information processing, and may open opportunities for studies of heat transport at the nanoscale, also in the quantum regime. Here we propose and experimentally demonstrate primary thermometry of propagating microwaves using a transmon-type superconducting circuit. Our device operates continuously, with a sensitivity down to $4\times 10^{-4}$ photons/$\sqrt{\mbox{Hz}}$ and a bandwidth of 40 MHz. We measure the thermal occupation of the modes of a highly attenuated coaxial cable in a range of 0.001 to 0.4 thermal photons, corresponding to a temperature range from 35 mK to 210 mK at a frequency around 5 GHz. To increase the radiation temperature in a controlled fashion, we either inject calibrated, wideband digital noise, or heat the device and its environment. This thermometry scheme can find applications in benchmarking and characterization of cryogenic microwave setups, temperature measurements in hybrid quantum systems, and quantum thermodynamics.
△ Less
Submitted 30 March, 2020;
originally announced March 2020.
-
Parity Detection of Propagating Microwave Fields
Authors:
Jean-Claude Besse,
Simone Gasparinetti,
Michele C. Collodo,
Theo Walter,
Ants Remm,
Jonas Krause,
Christopher Eichler,
Andreas Wallraff
Abstract:
The parity of the number of elementary excitations present in a quantum system provides important insights into its physical properties. Parity measurements are used, for example, to tomographically reconstruct quantum states or to determine if a decay of an excitation has occurred, information which can be used for quantum error correction in computation or communication protocols. Here we demons…
▽ More
The parity of the number of elementary excitations present in a quantum system provides important insights into its physical properties. Parity measurements are used, for example, to tomographically reconstruct quantum states or to determine if a decay of an excitation has occurred, information which can be used for quantum error correction in computation or communication protocols. Here we demonstrate a versatile parity detector for propagating microwaves, which distinguishes between radiation fields containing an even or odd number n of photons, both in a single-shot measurement and without perturbing the parity of the detected field. We showcase applications of the detector for direct Wigner tomography of propagating microwaves and heralded generation of Schrödinger cat states. This parity detection scheme is applicable over a broad frequency range and may prove useful, for example, for heralded or fault-tolerant quantum communication protocols.
△ Less
Submitted 20 December, 2019;
originally announced December 2019.
-
Entanglement Stabilization using Parity Detection and Real-Time Feedback in Superconducting Circuits
Authors:
Christian Kraglund Andersen,
Ants Remm,
Stefania Balasiu,
Sebastian Krinner,
Johannes Heinsoo,
Jean-Claude Besse,
Mihai Gabureac,
Andreas Wallraff,
Christopher Eichler
Abstract:
Fault tolerant quantum computing relies on the ability to detect and correct errors, which in quantum error correction codes is typically achieved by projectively measuring multi-qubit parity operators and by conditioning operations on the observed error syndromes. Here, we experimentally demonstrate the use of an ancillary qubit to repeatedly measure the $ZZ$ and $XX$ parity operators of two data…
▽ More
Fault tolerant quantum computing relies on the ability to detect and correct errors, which in quantum error correction codes is typically achieved by projectively measuring multi-qubit parity operators and by conditioning operations on the observed error syndromes. Here, we experimentally demonstrate the use of an ancillary qubit to repeatedly measure the $ZZ$ and $XX$ parity operators of two data qubits and to thereby project their joint state into the respective parity subspaces. By applying feedback operations conditioned on the outcomes of individual parity measurements, we demonstrate the real-time stabilization of a Bell state with a fidelity of $F\approx 74\%$ in up to 12 cycles of the feedback loop. We also perform the protocol using Pauli frame updating and, in contrast to the case of real-time stabilization, observe a steady decrease in fidelity from cycle to cycle. The ability to stabilize parity over multiple feedback rounds with no reduction in fidelity provides strong evidence for the feasibility of executing stabilizer codes on timescales much longer than the intrinsic coherence times of the constituent qubits.
△ Less
Submitted 20 February, 2019; v1 submitted 19 February, 2019;
originally announced February 2019.
-
Two-Photon Resonance Fluorescence of a Ladder-Type Atomic System
Authors:
Simone Gasparinetti,
Jean-Claude Besse,
Marek Pechal,
Robin D. Buijs,
Christopher Eichler,
Howard J. Carmichael,
Andreas Wallraff
Abstract:
Multi-photon emitters are a sought-after resource in quantum photonics. Nonlinear interactions between a multi-level atomic system and a coherent drive can lead to resonant two-photon emission, but harvesting light from this process has remained a challenge due to the small oscillator strengths involved. Here we present a study of two-photon resonance fluorescence at microwave frequencies, using a…
▽ More
Multi-photon emitters are a sought-after resource in quantum photonics. Nonlinear interactions between a multi-level atomic system and a coherent drive can lead to resonant two-photon emission, but harvesting light from this process has remained a challenge due to the small oscillator strengths involved. Here we present a study of two-photon resonance fluorescence at microwave frequencies, using a superconducting, ladder-type artificial atom, a transmon, strongly coupled to a waveguide. We drive the two-photon transition between the ground and second-excited state at increasingly high powers and observe a resonance fluorescence peak whose intensity becomes comparable to single-photon emission until it splits into a Mollow-like triplet. We measure photon correlations of frequency-filtered spectral lines and find that while emission at the fundamental frequency stays antibunched, the resonance fluorescence peak at the two-photon transition is superbunched. Our results provide a route towards the realization of multi-photon sources in the microwave domain.
△ Less
Submitted 2 January, 2019;
originally announced January 2019.
-
Quantum communication with time-bin encoded microwave photons
Authors:
Philipp Kurpiers,
Marek Pechal,
Baptiste Royer,
Paul Magnard,
Theo Walter,
Johannes Heinsoo,
Yves Salathé,
Abdulkadir Akin,
Simon Storz,
Jean-Claude Besse,
Simone Gasparinetti,
Alexandre Blais,
Andreas Wallraff
Abstract:
Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a…
▽ More
Heralding techniques are useful in quantum communication to circumvent losses without resorting to error correction schemes or quantum repeaters. Such techniques are realized, for example, by monitoring for photon loss at the receiving end of the quantum link while not disturbing the transmitted quantum state. We describe and experimentally benchmark a scheme that incorporates error detection in a quantum channel connecting two transmon qubits using traveling microwave photons. This is achieved by encoding the quantum information as a time-bin superposition of a single photon, which simultaneously realizes high communication rates and high fidelities. The presented scheme is straightforward to implement in circuit QED and is fully microwave-controlled, making it an interesting candidate for future modular quantum computing architectures.
△ Less
Submitted 19 November, 2018;
originally announced November 2018.
-
Observation of the Crossover from Photon Ordering to Delocalization in Tunably Coupled Resonators
Authors:
Michele C. Collodo,
Anton Potočnik,
Simone Gasparinetti,
Jean-Claude Besse,
Marek Pechal,
Mahdi Sameti,
Michael J. Hartmann,
Andreas Wallraff,
Christopher Eichler
Abstract:
Networks of nonlinear resonators offer intriguing perspectives as quantum simulators for non-equilibrium many-body phases of driven-dissipative systems. Here, we employ photon correlation measurements to study the radiation fields emitted from a system of two superconducting resonators, coupled nonlinearly by a superconducting quantum interference device (SQUID). We apply a parametrically modulate…
▽ More
Networks of nonlinear resonators offer intriguing perspectives as quantum simulators for non-equilibrium many-body phases of driven-dissipative systems. Here, we employ photon correlation measurements to study the radiation fields emitted from a system of two superconducting resonators, coupled nonlinearly by a superconducting quantum interference device (SQUID). We apply a parametrically modulated magnetic flux to control the linear photon hop** rate between the two resonators and its ratio with the cross-Kerr rate. When increasing the hop** rate, we observe a crossover from an ordered to a delocalized state of photons. The presented coupling scheme is intrinsically robust to frequency disorder and may therefore prove useful for realizing larger-scale resonator arrays.
△ Less
Submitted 2 August, 2018;
originally announced August 2018.
-
Rapid high-fidelity multiplexed readout of superconducting qubits
Authors:
Johannes Heinsoo,
Christian Kraglund Andersen,
Ants Remm,
Sebastian Krinner,
Theodore Walter,
Yves Salathé,
Simone Gasparinetti,
Jean-Claude Besse,
Anton Potočnik,
Christopher Eichler,
Andreas Wallraff
Abstract:
The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readou…
▽ More
The duration and fidelity of qubit readout is a critical factor for applications in quantum information processing as it limits the fidelity of algorithms which reuse qubits after measurement or apply feedback based on the measurement result. Here we present fast multiplexed readout of five qubits in a single 1.2 GHz wide readout channel. Using a readout pulse length of 80 ns and populating readout resonators for less than 250 ns we find an average correct assignment probability for the five measured qubits to be $97\%$. The differences between the individual readout errors and those found when measuring the qubits simultaneously are within $1\%$. We employ individual Purcell filters for each readout resonator to suppress off-resonant driving, which we characterize by the dephasing imposed on unintentionally measured qubits. We expect the here presented readout scheme to become particularly useful for the selective readout of individual qubits in multi-qubit quantum processors.
△ Less
Submitted 24 January, 2018;
originally announced January 2018.
-
Fast and Unconditional All-Microwave Reset of a Superconducting Qubit
Authors:
Paul Magnard,
Philipp Kurpiers,
Baptiste Royer,
Theo Walter,
Jean-Claude Besse,
Simone Gasparinetti,
Marek Pechal,
Johannes Heinsoo,
Simon Storz,
Alexandre Blais,
Andreas Wallraff
Abstract:
Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with…
▽ More
Active qubit reset is a key operation in many quantum algorithms, and particularly in error correction codes. Here, we experimentally demonstrate a reset scheme of a three level transmon artificial atom coupled to a large bandwidth resonator. The reset protocol uses a microwave-induced interaction between the $|f,0\rangle$ and $|g,1\rangle$ states of the coupled transmon-resonator system, with $|g\rangle$ and $|f\rangle$ denoting the ground and second excited states of the transmon, and $|0\rangle$ and $|1\rangle$ the photon Fock states of the resonator. We characterize the reset process and demonstrate reinitialization of the transmon-resonator system to its ground state with $0.2\%$ residual excitation in less than $500 \, \rm{ns}$. Our protocol is of practical interest as it has no requirements on the architecture, beyond those for fast and efficient single-shot readout of the transmon, and does not require feedback.
△ Less
Submitted 23 January, 2018;
originally announced January 2018.
-
Deterministic Quantum State Transfer and Generation of Remote Entanglement using Microwave Photons
Authors:
Philipp Kurpiers,
Paul Magnard,
Theo Walter,
Baptiste Royer,
Marek Pechal,
Johannes Heinsoo,
Yves Salathé,
Abdulkadir Akin,
Simon Storz,
Jean-Claude Besse,
Simone Gasparinetti,
Alexandre Blais,
Andreas Wallraff
Abstract:
Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageo…
▽ More
Sharing information coherently between nodes of a quantum network is at the foundation of distributed quantum information processing. In this scheme, the computation is divided into subroutines and performed on several smaller quantum registers connected by classical and quantum channels. A direct quantum channel, which connects nodes deterministically, rather than probabilistically, is advantageous for fault-tolerant quantum computation because it reduces the threshold requirements and can achieve larger entanglement rates. Here, we implement deterministic state transfer and entanglement protocols between two superconducting qubits fabricated on separate chips. Superconducting circuits constitute a universal quantum node capable of sending, receiving, storing, and processing quantum information. Our implementation is based on an all-microwave cavity-assisted Raman process which entangles or transfers the qubit state of a transmon-type artificial atom to a time-symmetric itinerant single photon. We transfer qubit states at a rate of $50 \, \rm{kHz}$ using the emitted photons which are absorbed at the receiving node with a probability of $98.1 \pm 0.1 \%$ achieving a transfer process fidelity of $80.02 \pm 0.07 \%$. We also prepare on demand remote entanglement with a fidelity as high as $78.9 \pm 0.1 \%$. Our results are in excellent agreement with numerical simulations based on a master equation description of the system. This deterministic quantum protocol has the potential to be used as a backbone of surface code quantum error correction across different nodes of a cryogenic network to realize large-scale fault-tolerant quantum computation in the circuit quantum electrodynamic architecture.
△ Less
Submitted 22 December, 2017;
originally announced December 2017.
-
Single-Shot Quantum Non-Demolition Detection of Itinerant Microwave Photons
Authors:
Jean-Claude Besse,
Simone Gasparinetti,
Michele C. Collodo,
Theo Walter,
Philipp Kurpiers,
Marek Pechal,
Christopher Eichler,
Andreas Wallraff
Abstract:
Single-photon detection is an essential component in many experiments in quantum optics, but remains challenging in the microwave domain. We realize a quantum non-demolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting arti…
▽ More
Single-photon detection is an essential component in many experiments in quantum optics, but remains challenging in the microwave domain. We realize a quantum non-demolition detector for propagating microwave photons and characterize its performance using a single-photon source. To this aim we implement a cavity-assisted conditional phase gate between the incoming photon and a superconducting artificial atom. By reading out the state of this atom in single shot, we reach an internal photon detection fidelity of 71%, limited by the coherence properties of the qubit. By characterizing the coherence and average number of photons in the field reflected off the detector, we demonstrate its quantum non-demolition nature. We envisage applications in generating heralded remote entanglement between qubits and for realizing logic gates between propagating microwave photons.
△ Less
Submitted 30 November, 2017;
originally announced November 2017.
-
Correlations and entanglement of microwave photons emitted in a cascade decay
Authors:
Simone Gasparinetti,
Marek Pechal,
Jean-Claude Besse,
Mintu Mondal,
Christopher Eichler,
Andreas Wallraff
Abstract:
An excited emitter decays by radiating a photon into a quantized mode of the electromagnetic field, a process known as spontaneous emission. If the emitter is driven to a higher excited state, it radiates multiple photons in a cascade decay. Atomic and biexciton cascades have been exploited as sources of polarization-entangled photon pairs. Because the photons are emitted sequentially, their inten…
▽ More
An excited emitter decays by radiating a photon into a quantized mode of the electromagnetic field, a process known as spontaneous emission. If the emitter is driven to a higher excited state, it radiates multiple photons in a cascade decay. Atomic and biexciton cascades have been exploited as sources of polarization-entangled photon pairs. Because the photons are emitted sequentially, their intensities are strongly correlated in time, as measured in a double-beam coincidence experiment. Perhaps less intuitively, their phases can also be correlated, provided a single emitter is deterministically prepared into a superposition state, and the emitted radiation is detected in a phase-sensitive manner and with high efficiency. Here we have met these requirements by using a superconducting artificial atom, coherently driven to its second-excited state and decaying into a well-defined microwave mode. Our results highlight the coherent nature of cascade decay and demonstrate a novel protocol to generate entanglement between itinerant field modes.
△ Less
Submitted 15 May, 2017;
originally announced May 2017.
-
Superconducting switch for fast on-chip routing of quantum microwave fields
Authors:
M. Pechal,
J. -C. Besse,
M. Mondal,
M. Oppliger,
S. Gasparinetti,
A. Wallraff
Abstract:
A switch capable of routing microwave signals at cryogenic temperatures is a desirable component for state-of-the-art experiments in many fields of applied physics, including but not limited to quantum information processing, communication and basic research in engineered quantum systems. Conventional mechanical switches provide low insertion loss but disturb operation of dilution cryostats and th…
▽ More
A switch capable of routing microwave signals at cryogenic temperatures is a desirable component for state-of-the-art experiments in many fields of applied physics, including but not limited to quantum information processing, communication and basic research in engineered quantum systems. Conventional mechanical switches provide low insertion loss but disturb operation of dilution cryostats and the associated experiments by heat dissipation. Switches based on semiconductors or microelectromechanical systems have a lower thermal budget but are not readily integrated with current superconducting circuits. Here we design and test an on-chip switch built by combining tunable transmission-line resonators with microwave beam-splitters. The device is superconducting and as such dissipates a negligible amount of heat. It is compatible with current superconducting circuit fabrication techniques, operates with a bandwidth exceeding $100\,\mathrm{MHz}$, is capable of handling photon fluxes on the order of $10^{5}\,μ\mathrm{s}^{-1}$, equivalent to powers exceeding $-90\,\mathrm{dBm}$, and can be switched within approximately $6-8\,\mathrm{ns}$. We successfully demonstrate operation of the device in the quantum regime by integrating it on a chip with a single-photon source and using it to route non-classical itinerant microwave fields at the single-photon level.
△ Less
Submitted 3 June, 2016;
originally announced June 2016.
