Showing 1–7 of 7 results for author: Bernier, E

Broadband high-resolution integrated spectrometer architecture & data processing method

Authors: Mehedi Hasan, Gazi Mahamud Hasan, Houman Ghorbani, Mohammad Rad, Peng Liu, Eric Bernier, Trevor Hall

Abstract: Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-sta… ▽ More Up-to-date network telemetry is the key enabler for resource optimization by capacity scaling, fault recovery, and network reconfiguration among other means. Reliable optical performance monitoring in general and, specifically, the monitoring of the spectral profile of WDM signals in fixed- and flex- grid architectures across the entire C-band, remains challenging. This article describes a two-stage spectrometer architecture amenable to integration on a single chip that can measure quantitatively the spectrum across the entire C-band with a resolution of 1 GHz approximately. The first stage consists of a ring resonator with intra-ring phase shifter to provide a tuneable fine filter. The second stage makes use of an AWG subsystem and novel processing algorithm to synthesize a tuneable coarse filter with a flat passband which isolates individual resonances of a multiplicity of ring resonances. Due to its maturity and low loss, CMOS compatible Si$_3$N$_4$ is chosen for integration. A fabricated ring resonator functioning over the entire C-band with 1.3 GHz FWHM bandwidth resonances tunable over a complete free spectral range of 50 GHz is experimentally demonstrated. The complete system operation is demonstrated using an industry standard simulation tool and AWG constructor data. The operation of the circuit is invariant to the optical path length between individual components substantially improving robustness to fabrication process variations. △ Less

Submitted 16 January, 2023; originally announced January 2023.

Comments: 16 pages, 7 figures. arXiv admin note: substantial text overlap with arXiv:2108.10121

Scalable switched slab coupler based optical phased array on silicon nitride

Authors: Pascual Muñoz, Daniel Pastor, Luis A. Bru, Gloria Micó, Jesús Benítez, Dominic J. Goodwill, Eric Bernier

Abstract: A two-dimensional optical-phased array is demonstrated by using a multiple-input star coupler, compatible with FMCW LiDAR. Previous approach using a single-input design achieves two-dimensional beam-steering by relying on a tunable laser source, taking advantage of grating coupler radiation angle wavelength dependance and variation of the waveguide refractive index. While implementing a convenient… ▽ More A two-dimensional optical-phased array is demonstrated by using a multiple-input star coupler, compatible with FMCW LiDAR. Previous approach using a single-input design achieves two-dimensional beam-steering by relying on a tunable laser source, taking advantage of grating coupler radiation angle wavelength dependance and variation of the waveguide refractive index. While implementing a convenient way to distribute power in a single step, star coupler architecture is inefficient in terms of employed waveguide length and thus, optical loss and footprint. Multi-input approach partially alleviates this by condensing several single-input devices into one, permitting to reduce the footprint proportionally to the employed number of inputs. We fabricated in silicon nitride technology a proof of concept steerer with beam waist 0.36 deg x 0.175 deg addressing a field of view of 15 deg x 2.8 deg. A new design iteration is also reported with and 0.24 deg x 0.16 deg beam waist and 15 deg x 11.2 deg field of view. Implications of this optical-phased array chips from a LiDAR system perspective are also presented. △ Less

Submitted 31 March, 2022; originally announced March 2022.

Comments: Accepted for publication in the IEEE Journal of Selected Topics in Quantum Electronics. Copyright 2022 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses

Optical Wavelength Meter with Machine Learning Enhanced Precision

Authors: Gazi Mahamud Hasan, Mehedi Hasan, Peng Liu, Mohammad Rad, Eric Bernier, Trevor James Hall

Abstract: Diverse applications in photonics and microwave engineering require a means of measurement of the instantaneous frequency of a signal. A photonic implementation typically applies an interferometer equipped with three or more output ports to measure the frequency dependent phase shift provided by an optical delay line. The components constituting the interferometer are prone to impairments which re… ▽ More Diverse applications in photonics and microwave engineering require a means of measurement of the instantaneous frequency of a signal. A photonic implementation typically applies an interferometer equipped with three or more output ports to measure the frequency dependent phase shift provided by an optical delay line. The components constituting the interferometer are prone to impairments which results in erroneous measurements. It is shown that the information to be retrieved is encoded by a three-component vector that lies on a circular cone within a three-dimensional Cartesian object space. The measured data belongs to the image of the object space under a linear map that describes the action of the interferometer. Assisted by a learning algorithm, an inverse map from the image space into the object space is constructed. The inverse map compensates for a variety of impairments while being robust to noise. Simulation results demonstrate that, to the extent the interferometer model captures all significant impairments, a precision limited only by the level of random noise is attainable. A wavelength meter architecture is fabricated on Si3N4 photonic integration platform to prove the method experimentally. Applied to the measured data, greater than an order of magnitude improvement in precision is achieved by the proposed method compared to the conventional method. △ Less

Submitted 14 March, 2022; originally announced March 2022.

Comments: 18 pages, 9 figures, 1 table

Circuit design and integration feasibility of a high-resolution broadband on-chip spectral monitor

Authors: Mehedi Hasan, Gazi Mahamud Hasan, Houman Ghorbani, Mohammad Rad, Peng Liu, Eric Bernier, Trevor Hall

Abstract: Up-to-date network telemetry is the key enabler for resource optimization by a variety of means including capacity scaling, fault recovery, network reconfiguration. Reliable optical performance monitoring in general and specifically the monitoring of the spectral profile of WDM signals in fixed- and flex-grid architecture across the entire C-band remains challenging. This article describes a spect… ▽ More Up-to-date network telemetry is the key enabler for resource optimization by a variety of means including capacity scaling, fault recovery, network reconfiguration. Reliable optical performance monitoring in general and specifically the monitoring of the spectral profile of WDM signals in fixed- and flex-grid architecture across the entire C-band remains challenging. This article describes a spectrometer circuit architecture along with an original data processing algorithm that combined can measure the spectrum quantitatively across the entire C-band aiming at 1 GHz resolution bandwidth. The circuit is composed of a scanning ring resonator followed by a parallel arrangement of AWGs with interlaced channel spectra. The comb of ring resonances provides the high resolution and the algorithm creates a virtual tuneable AWG that isolates individual resonances of the comb within the flat pass-band of its synthesized channels. The parallel arrangement of AWGs may be replaced by a time multiplexed multi-input port AWG. The feasibility of a ring resonator functioning over whole C-band is experimentally validated. Full tuning of the comb of resonances over a free spectral range is achieved with a high-resolution bandwidth of 1.30 GHz. Due to its maturity and low loss, CMOS compatible silicon nitride is chosen for integration. Additionally, the whole system demonstration is presented using industry standard simulation tool. The architecture is robust to fabrication process variations owing to its data processing approach. △ Less

Submitted 11 August, 2021; originally announced August 2021.

Comments: 17 pages, 13 figures

On the performance of optical phased array technology for beam steering

Authors: Antonio Cala' Lesina, Dominic Goodwill, Eric Bernier, Lora Ramunno, Pierre Berini

Abstract: Optical phased arrays are of strong interest for beam steering in telecom and LIDAR applications. A phased array ideally requires that the field produced by each element in the array (a pixel) is fully controllable in phase and amplitude (ideally constant). This is needed to realize a phase gradient along a direction in the array, and thus beam steering in that direction. In practice, grating lobe… ▽ More Optical phased arrays are of strong interest for beam steering in telecom and LIDAR applications. A phased array ideally requires that the field produced by each element in the array (a pixel) is fully controllable in phase and amplitude (ideally constant). This is needed to realize a phase gradient along a direction in the array, and thus beam steering in that direction. In practice, grating lobes appear if the pixel size is not sub-wavelength, which is an issue for many optical technologies. Furthermore, the phase performance of an optical pixel may not span the required $2π$ phase range, or may not produce a constant amplitude over its phase range. These limitations result in imperfections in the phase gradient, which in turn introduce undesirable secondary lobes. We discuss the effects of non-ideal pixels on beam formation, in a general and technology-agnostic manner. By examining the strength of secondary lobes with respect to the main lobe, we quantify beam steering quality, and make recommendations on the pixel performance required for beam steering within prescribed specifications. By applying appropriate compensation strategies, we show that it is possible to realize high-quality beam steering even when the pixel performance is non-ideal, with intensity of the secondary lobes be two orders of magnitude smaller than the main lobe. △ Less

Submitted 20 July, 2020; originally announced July 2020.

Comments: 19 pages, 10 figures, 3 movies and 1 Python code

Circuit architecture of a sub-GHz resolution panoramic C band on-chip spectral sensor

Authors: Mehedi Hasan, Mohammad Rad, Gazi Mahamud Hasan, Peng Liu, Patric Dumais, Eric Bernier, Trevor Hall

Abstract: Monitoring the state of the optical network is a key enabler for programmability of network functions, protocols and efficient use of the spectrum. A particular challenge is to provide the SDN-EON controller with a panoramic view of the complete state of the optical spectrum. This paper describes the architecture for compact on-chip spectrometry targeting high resolution across the entire C-band t… ▽ More Monitoring the state of the optical network is a key enabler for programmability of network functions, protocols and efficient use of the spectrum. A particular challenge is to provide the SDN-EON controller with a panoramic view of the complete state of the optical spectrum. This paper describes the architecture for compact on-chip spectrometry targeting high resolution across the entire C-band to reliably and accurately measure the spectral profile of WDM signals in fixed and flex-grid architectures. An industry standard software tool is used to validate the performance of the spectrometer. The fabrication of the proposed design is found to be practical. △ Less

Submitted 24 October, 2019; originally announced December 2019.

Comments: 14 pages, 10 figures

Optical phased arrays for LIDAR: beam steering via tunable plasmonic metasurfaces

Authors: Antonino Calà Lesina, Dominic Goodwill, Eric Bernier, Lora Ramunno, Pierre Berini

Abstract: Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering volt… ▽ More Controlling the phase and amplitude of light emitted by the elements (i.e., pixels) of an optical phased array is of paramount importance to realizing dynamic beam steering for LIDAR applications. In this paper, we propose a plasmonic pixel composed of a metallic nanoantenna covered by a thin oxide layer, and a conductive oxide, e.g., ITO, for use in a reflectarray metasurface. By considering voltage biasing of the nanoantenna via metallic connectors, and exploiting the carrier refraction effect in the metal-oxide-semiconductor capacitor in the accumulation and depletion regions, our simulations predict control of the reflection coefficient phase over a range $>330^{\circ}$ with a nearly constant magnitude. We discuss the physical mechanism underlying the optical response, the effect of the connectors, and propose strategies to maximize the magnitude of the reflection coefficient and to achieve dual-band operation. The suitability of our plasmonic pixel design for beam steering in LIDAR is demonstrated via 3D-FDTD simulations. △ Less

Submitted 4 December, 2019; originally announced December 2019.