-
Towards Cell-Free Massive MIMO: A Measurement-Based Analysis
Authors:
David Löschenbrand,
Markus Hofer,
Laura Bernadó,
Stefan Zelenbaba,
Thomas Zemen
Abstract:
Cell-free widely distributed massive multiple-input multiple-output (MIMO) systems utilize radio units spread out over a large geographical area. The radio signal of a user equipment (UE) is coherently detected by a subset of radio units (RUs) in the vicinity of the UE and processed jointly at the nearest baseband processing unit (BPU). This architecture promises two orders of magnitude less trans…
▽ More
Cell-free widely distributed massive multiple-input multiple-output (MIMO) systems utilize radio units spread out over a large geographical area. The radio signal of a user equipment (UE) is coherently detected by a subset of radio units (RUs) in the vicinity of the UE and processed jointly at the nearest baseband processing unit (BPU). This architecture promises two orders of magnitude less transmit power, spatial focusing at the UE position for high reliability, and consistent throughput over the coverage area. All these properties have been investigated so far from a theoretical point of view. To the best of our knowledge, this work presents the first empirical radio wave propagation measurements in the form of time-variant channel transfer functions for a linear, widely distributed antenna array with 32 single antenna RUs spread out over a range of 46.5 m. The large aperture allows for valuable insights into the propagation characteristics of cell-free systems. Three different co-located and widely distributed RU configurations and their properties in an urban environment are analyzed in terms of time-variant delay-spread, Doppler spread, path loss and the correlation of the local scattering function over space. For the development of 6G cell-free massive MIMO transceiver algorithms, we analyze properties such as channel hardening, channel aging as well as the signal to interference and noise ratio (SINR). Our empirical evidence supports the promising claims for widely distributed cell-free systems.
△ Less
Submitted 30 August, 2022; v1 submitted 4 July, 2022;
originally announced July 2022.
-
Multi-Node Vehicular Wireless Channels: Measurements, Large Vehicle Modelling, and Hardware-in-the-Loop Evaluation
Authors:
Stefan Zelenbaba,
Benjamin Rainer,
Markus Hofer,
David Löschenbrand,
Laura Bernadó,
Anja Dakić,
Thomas Zemen
Abstract:
Understanding multi-node vehicular wireless communication channels is crucial for future time-sensitive safety applications for human-piloted as well as partly autonomous vehicles on roads, railways and in the air. These highly dynamic wireless communication channels are characterized by rapidly changing channel statistics. In this paper we present the first fully mobile multi-node vehicular wirel…
▽ More
Understanding multi-node vehicular wireless communication channels is crucial for future time-sensitive safety applications for human-piloted as well as partly autonomous vehicles on roads, railways and in the air. These highly dynamic wireless communication channels are characterized by rapidly changing channel statistics. In this paper we present the first fully mobile multi-node vehicular wireless channel sounding system, which is capable of simultaneously capturing multiple channel frequency responses, ensuring that measurement conditions are identical for all observed links. We use it to analyze road scenarios with multiple vehicles and a large obstructing double-decker bus. The empirical measurement data is used to parametrize a model for the large obstructing vehicle within a geometry-based stochastic channel model. We compare the time-variant channel statistics obtained from our channel model with the ones from the measurement campaign. By means of a channel emulator we obtain the packet error rates of commercial modems for the measured and the simulated wireless communication channels and compare them, in order to validate the model at the link level. We find that the path loss, the root mean square (RMS) delay spread, and the RMS Doppler spread deviate by less than $3.6\,\mathrm{dB}$, $78\,\mathrm{ns}$, and $52\,\mathrm{Hz}$, respectively, for $80\%$ of the total simulation duration. The PER obtained from measured data is within the maximum and minimum bounds of our model for $86\%$ of the simulation duration.
△ Less
Submitted 6 July, 2021; v1 submitted 11 March, 2021;
originally announced March 2021.
-
Real-Time Vehicular Wireless System-Level Simulation
Authors:
Anja Dakić,
Markus Hofer,
Benjamin Rainer,
Stefan Zelenbaba,
Laura Bernadó,
Thomas Zemen
Abstract:
Future automation and control units for advanced driver assistance systems (ADAS) will exchange sensor and kinematic data with nearby vehicles using wireless communication links to improve traffic safety. In this paper we present an accurate real-time system-level simulation for multi-vehicle communication scenarios to support the development and test of connected ADAS systems. The physical and da…
▽ More
Future automation and control units for advanced driver assistance systems (ADAS) will exchange sensor and kinematic data with nearby vehicles using wireless communication links to improve traffic safety. In this paper we present an accurate real-time system-level simulation for multi-vehicle communication scenarios to support the development and test of connected ADAS systems. The physical and data-link layer are abstracted and provide the frame error rate (FER) to a network simulator. The FER is strongly affected by the non-stationary doubly dispersive fading process of the vehicular radio communication channel. We use a geometry-based stochastic channel model (GSCM) to enable a simplified but still accurate representation of the non-stationary vehicular fading process. The propagation path parameters of the GSCM are used to efficiently compute the time-variant condensed radio channel parameters per stationarity region of each communication link during run-time. Five condensed radio channel parameters mainly determine the FER forming a parameter vector: path loss, root mean square delay spread, Doppler bandwidth, $K$-factor, and line-of-sight Doppler shift. We measure the FER for a pre-defined set of discrete grid points of the parameter vector using a channel emulator and a given transmitter-receiver modem pair. The FER data is stored in a table and looked up during run-time of the real-time system-level simulation. We validate our methodology using empirical measurement data from a street crossing scenarios demonstrating a close match in terms of FER between simulation and measurement.
△ Less
Submitted 8 August, 2023; v1 submitted 22 December, 2020;
originally announced December 2020.
-
Time- and Frequency-Varying $K$-Factor of Non-Stationary Vehicular Channels for Safety Relevant Scenarios
Authors:
Laura Bernadó,
Thomas Zemen,
Fredrik Tufvesson,
Andreas F. Molisch,
Christoph F. Mecklenbräuker
Abstract:
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time-frequency variability of this channel parameter using vehicular channel measurements a…
▽ More
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to fast changes in the environment. We characterize the distribution of the envelope of the first delay bin in vehicle-to-vehicle channels by means of its Rician $K$-factor. We analyze the time-frequency variability of this channel parameter using vehicular channel measurements at 5.6 GHz with a bandwidth of 240 MHz for safety-relevant scenarios in intelligent transportation systems (ITS). This data enables a frequency-variability analysis from an IEEE 802.11p system point of view, which uses 10 MHz channels. We show that the small-scale fading of the envelope of the first delay bin is Ricean distributed with a varying $K$-factor. The later delay bins are Rayleigh distributed. We demonstrate that the $K$-factor cannot be assumed to be constant in time and frequency. The causes of these variations are the frequency-varying antenna radiation patterns as well as the time-varying number of active scatterers, and the effects of vegetation. We also present a simple but accurate bi-modal Gaussian mixture model, that allows to capture the $K$-factor variability in time for safety-relevant ITS scenarios.
△ Less
Submitted 25 April, 2014; v1 submitted 17 June, 2013;
originally announced June 2013.
-
Delay and Doppler Spreads of Non-Stationary Vehicular Channels for Safety Relevant Scenarios
Authors:
Laura Bernadó,
Thomas Zemen,
Fredrik Tufvesson,
Andreas F. Molisch,
Christoph F. Mecklenbräuker
Abstract:
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to rapid changes in the environment. The non-stationary fading process can be characterized by assuming local stationarity for a region with finite extent in time and frequency. For this finite region the wide-sense stationarity and uncorrelated-scattering (WSSUS) assumption hold…
▽ More
Vehicular communication channels are characterized by a non-stationary time- and frequency-selective fading process due to rapid changes in the environment. The non-stationary fading process can be characterized by assuming local stationarity for a region with finite extent in time and frequency. For this finite region the wide-sense stationarity and uncorrelated-scattering (WSSUS) assumption holds approximately and we are able to calculate a time and frequency dependent local scattering function (LSF). In this paper, we estimate the LSF from a large set of measurements collected in the DRIVEWAY'09 measurement campaign, which focuses on scenarios for intelligent transportation systems. We then obtain the time-frequency-varying power delay profile (PDP) and the time-frequency-varying Doppler power spectral density (DSD) from the LSF. Based on the PDP and the DSD, we analyze the time-frequency-varying root mean square (RMS) delay spread and the RMS Doppler spread. We show that the distribution of these channel parameters follows a bi-modal Gaussian mixture distribution. High RMS delay spread values are observed in situations with rich scattering, while high RMS Doppler spreads are obtained in drive-by scenarios.
△ Less
Submitted 15 May, 2013;
originally announced May 2013.
