-
Energetic particles transport in constants of motion space due to collisions in tokamak plasmas
Authors:
Guo Meng,
Philipp Lauber,
Zhixin Lu,
Andreas Bergmann,
Mirelle Schneider
Abstract:
The spatio-temporal evolution of the energetic particles in the transport time scale in tokamak plasmas is a key issue of the plasmas confinement, especially in burning plasmas. In order to include sources and sinks and collisional slowing down processes, a new solver, ATEP-3D was implemented to simulate the evolution of the EP distribution in the three-dimensional constants of motion (CoM) space.…
▽ More
The spatio-temporal evolution of the energetic particles in the transport time scale in tokamak plasmas is a key issue of the plasmas confinement, especially in burning plasmas. In order to include sources and sinks and collisional slowing down processes, a new solver, ATEP-3D was implemented to simulate the evolution of the EP distribution in the three-dimensional constants of motion (CoM) space. The Fokker-Planck collision operator represented in the CoM space is derived and numerically calculated. The collision coefficients are averaged over the unperturbed orbits to capture the fundamental properties of EPs. ATEP-3D is fully embedded in ITER IMAS framework and combined with the LIGKA/HAGIS codes. The finite volume method and the implicit Crank-Nicholson scheme are adopted due to their optimal numerical properties for transport time scale studies. ATEP-3D allows the analysis of the particle and power balance with the source and sink during the transport process to evaluate the EP confinement properties.
△ Less
Submitted 16 May, 2024;
originally announced May 2024.
-
Verification of the Fourier-enhanced 3D finite element Poisson solver of the gyrokinetic full-f code PICLS
Authors:
Annika Stier,
Alberto Bottino,
Mathias Boesl,
Martin Campos Pinto,
Thomas Hayward-Schneider,
David Coster,
Andreas Bergmann,
Moahan Murugappan,
Stephan Brunner,
Laurent Villard,
Frank Jenko
Abstract:
We introduce and derive the Fourier-enhanced 3D electrostatic field solver of the gyrokinetic full-f PIC code PICLS. The solver makes use of a Fourier representation in one periodic direction of the domain to make the solving of the system easily parallelizable and thus save run time. The presented solver is then verified using two different approaches of manufactured solutions. The test setup use…
▽ More
We introduce and derive the Fourier-enhanced 3D electrostatic field solver of the gyrokinetic full-f PIC code PICLS. The solver makes use of a Fourier representation in one periodic direction of the domain to make the solving of the system easily parallelizable and thus save run time. The presented solver is then verified using two different approaches of manufactured solutions. The test setup used for this effort is a pinch geometry with ITG-like electric potential, containing one non-periodic and two periodic directions, one of which will be discrete Fourier transformed. The results of these tests show that in all three dimensions the L2-error decreases with a constant rate close to the ideal prediction, depending on the degree of the chosen basis functions.
△ Less
Submitted 2 March, 2023;
originally announced March 2023.
-
Gyrokinetic simulations of neoclassical electron transport and bootstrap current generation in tokamak plasmas in the TRIMEG code
Authors:
Lana Rekhviashvili,
Zhixin Lu,
Matthias Hoelzl,
Andreas Bergmann,
Philipp Lauber
Abstract:
For magnetic confinement fusion in tokamak plasmas, some of the limitations to the particle and energy confinement times are caused by turbulence and collisions between particles in toroidal geometry, which determine the "anomalous" and the neoclassical transport, respectively. In this work, we focus on the implementation of neoclassical physics in the gyrokinetic code TRIMEG, which is a TRIangula…
▽ More
For magnetic confinement fusion in tokamak plasmas, some of the limitations to the particle and energy confinement times are caused by turbulence and collisions between particles in toroidal geometry, which determine the "anomalous" and the neoclassical transport, respectively. In this work, we focus on the implementation of neoclassical physics in the gyrokinetic code TRIMEG, which is a TRIangular MEsh-based Gyrokinetic code that can handle both the closed and open field line geometries of a divertor tokamak. We report on the implementation of a simplified Lorentz collision operator in TRIMEG. Since the code uses an unstructured mesh, a procedure for calculating the flux surface averages of particle and energy fluxes and the bootstrap current is derived without relying on the poloidal coordinate, which is useful also for other simulations in unstructured meshes. With the newly implemented collision operator, we study electron transport and bootstrap current generation for various simplified and realistic geometries. In comparison to neoclassical theory, good agreement is obtained for the large aspect ratio case regarding the particle and energy fluxes as well as the bootstrap current. However, some discrepancies are observed at moderate aspect ratio and for a case with the realistic geometry of the ASDEX Upgrade tokamak. These deviations can be explained by different treatments and approximations in theory and simulation. In this paper, we demonstrate the capability to calculate the electron transport and bootstrap current generation in TRIMEG, which will allow for the self-consistent inclusion of neoclassical effects in gyrokinetic simulations in the future.
△ Less
Submitted 13 June, 2023; v1 submitted 1 March, 2023;
originally announced March 2023.
-
Testing a Battery Management System via Criticality-based Rare Event Simulation
Authors:
Daniel Grujic,
Tabea Henning,
Emilio José Calleja García,
Andre Bergmann
Abstract:
For the validation of safety-critical systems regarding safety and comfort, e.g., in the context of automated driving, engineers often have to cope with large (parametric) test spaces for which it is infeasible to test through all possible parameter configurations. At the same time, critical behavior of a well-engineered system with respect to prescribed safety and comfort requirements tends to be…
▽ More
For the validation of safety-critical systems regarding safety and comfort, e.g., in the context of automated driving, engineers often have to cope with large (parametric) test spaces for which it is infeasible to test through all possible parameter configurations. At the same time, critical behavior of a well-engineered system with respect to prescribed safety and comfort requirements tends to be extremely rare, speaking of probabilities of order $10^{-6}$ or less, but clearly has to be examined carefully for valid argumentation. Hence, common approaches such as boundary value analysis are insufficient while methods based on random sampling from the parameter space (simple Monte Carlo) lack the ability to detect these rare critical events efficiently, i.e., with appropriate simulation budget. For this reason, a more sophisticated simulation-based approach is proposed which employs optimistic optimization on an objective function called "criticality" in order to identify effectively the set of critical parameter configurations. Within the scope of the ITEA 3 TESTOMAT project (http://www.testomatproject.eu/) the collaboration partners OFFIS e.V. and AKKA Germany GmbH conducted a case study on applying criticality-based rare event simulation to the charging process of an automotive battery management system given as a model. The present technical report documents the industrial use case, the approach, application and experimental results, as well as lessons learned from the case study.
△ Less
Submitted 1 July, 2021;
originally announced July 2021.
-
Collisional gyrokinetic full-f particle-in-cell simulations on open field lines with PICLS
Authors:
Mathias Boesl,
Andreas Bergmann,
Alberto Bottino,
Stephan Brunner,
David Coster,
Frank Jenko
Abstract:
Applying gyrokinetic simulations for theoretical turbulence and transport studies to the plasma edge and scrape-off layer (SOL) presents significant challenges. To in particular account for steep density and temperature gradients in the SOL, the "full-f" code PICLS was developed. PICLS is a gyrokinetic particle-in-cell (PIC) code and is based on an electrostatic model with a linearized field equat…
▽ More
Applying gyrokinetic simulations for theoretical turbulence and transport studies to the plasma edge and scrape-off layer (SOL) presents significant challenges. To in particular account for steep density and temperature gradients in the SOL, the "full-f" code PICLS was developed. PICLS is a gyrokinetic particle-in-cell (PIC) code and is based on an electrostatic model with a linearized field equation and uses kinetic electrons. In previously published results we were applying PICLS to the well-studied 1D parallel transport problem during an edge-localized mode (ELM) in the SOL without collisions. As an extension to this collision-less case and in preparation for 3D simulations, in this work a collisional model will be introduced. The implemented Lenard-Bernstein collision operator and its Langevin discretization will be shown. Conservation properties of the collision operator as well as a comparison of the collisional and non-collisional case will be discussed.
△ Less
Submitted 9 September, 2019;
originally announced September 2019.
-
Gyrokinetic full-f particle-in-cell simulations on open field lines with PICLS
Authors:
Mathias Helmut Boesl,
Andreas Bergmann,
Alberto Bottino,
David Coster,
Emmanuel Lanti,
Noe Ohana,
Frank Jenko
Abstract:
While in recent years, gyrokinetic simulations have become the workhorse for theoretical turbulence and transport studies in the plasma core, their application to the edge and scrape-off layer (SOL) region presents significant challenges. In particular, steep density and temperature gradients as well as large fluctuation amplitudes call for a "full-f" treatment. To specifically study problems in t…
▽ More
While in recent years, gyrokinetic simulations have become the workhorse for theoretical turbulence and transport studies in the plasma core, their application to the edge and scrape-off layer (SOL) region presents significant challenges. In particular, steep density and temperature gradients as well as large fluctuation amplitudes call for a "full-f" treatment. To specifically study problems in the SOL region, the gyrokinetic particle-in-cell (PIC) code PICLS has been developed. The code is based on an electrostatic full-f model with linearised field equations and uses kinetic electrons. Here, the well-studied parallel transport problem during an edge-localized mode (ELM) in the SOL shall be investigated for one spatial dimension. The results are compared to previous gyrokinetic continuum and fully kinetic PIC simulations and show good agreement.
△ Less
Submitted 7 January, 2020; v1 submitted 1 August, 2019;
originally announced August 2019.
-
Magnetism and structure of magnetic multilayers based on the fully spin polarized Heusler alloys Co2MnGe and Co2MnSn
Authors:
K. Westerholt,
A. Bergmann,
J. Grabis,
A. Nefedov,
H. Zabel
Abstract:
Our Introduction starts with a short general review of the magnetic and structural properties of the Heusler compounds which are under discussion in this book. Then, more specifically, we come to the discussion of our experimental results on multilayers composed of the Heusler alloys Co2MnGe and Co2MnSn with V or Au as interlayers. The experimental methods we apply combine magnetization and magn…
▽ More
Our Introduction starts with a short general review of the magnetic and structural properties of the Heusler compounds which are under discussion in this book. Then, more specifically, we come to the discussion of our experimental results on multilayers composed of the Heusler alloys Co2MnGe and Co2MnSn with V or Au as interlayers. The experimental methods we apply combine magnetization and magneto-resistivity measurements, x-ray diffraction and reflectivity, soft x-ray magnetic circular dichroism and spin polarized neutron reflectivity. We find that below a critical thickness of the Heusler layers at typically dcr = 1.5 nm the ferromagnetic order is lost and spin glass order occurs instead. For very thin ferromagnetic Heusler layers there are peculiarities in the magnetic order which are unusual when compared to conventional ferromagnetic transition metal multilayer systems. In [Co2MnGe/Au] multilayers there is an exchange bias shift at the ferromagnetic hysteresis loops at low temperatures caused by spin glass ordering at the interface. In [Co2MnGe/V] multilayers we observe an antiferromagnetic interlayer long range ordering below a well defined Neel temperature originating from the dipolar stray fields at the magnetically rough Heusler layer interfaces.
△ Less
Submitted 22 November, 2006;
originally announced November 2006.
-
Soft X-ray Resonant Magnetic Scattering Studies on Fe/CoO Exchange Bias System
Authors:
Florin Radu,
Alexei Nefedov,
Johannes Grabis,
Gregor Nowak,
Andre Bergmann,
Hartmut Zabel
Abstract:
We have used soft X-ray Resonant Magnetic Scattering (XRMS) to search for the presence of an effective ferromagnetic moment belonging to the antiferromagnetic (AF) layer which is in close contact with a ferromagnetic (F) layer. Taking advantage of the element specificity of the XRMS technique, we have measured hysteresis loops of both Fe and CoO layers of a CoO(40 Å)/Fe(150 Å) exchange bias bila…
▽ More
We have used soft X-ray Resonant Magnetic Scattering (XRMS) to search for the presence of an effective ferromagnetic moment belonging to the antiferromagnetic (AF) layer which is in close contact with a ferromagnetic (F) layer. Taking advantage of the element specificity of the XRMS technique, we have measured hysteresis loops of both Fe and CoO layers of a CoO(40 Å)/Fe(150 Å) exchange bias bilayer. From these measurements we have concluded that the proximity of the F layer induces a magnetic moment in the AF layer. The F moment of the AF layer has two components: one is frozen and does not follow the applied magnetic field and the other one follows in phase the ferromagnetic magnetization of the F layer. The temperature dependence of the F components belonging to the AF layer is shown and discussed.
△ Less
Submitted 19 May, 2005;
originally announced May 2005.
-
Preparation and structural properties of thin films and multilayers of the Heusler compounds Cu2MnAl, Co2MnSn, Co2MnSi and Co2MnGe
Authors:
U. Geiersbach,
A. Bergmann,
K. Westerholt
Abstract:
We report on the preparation of thin films and multilayers of the intermetallic Heusler compound CuMnAl, Co2MnSn, Co2MnSi and Co2MnGe by rf-sputtering on MgO and Al2O3 substrates. Cu2MnAl can be grown epitaxially with (100)-orientation on MgO (100) and in (110)-orientation on Al2O3 a-plane. The Co based Heusler alloys need metallic seedlayers to induce high quality textured growth. We also have…
▽ More
We report on the preparation of thin films and multilayers of the intermetallic Heusler compound CuMnAl, Co2MnSn, Co2MnSi and Co2MnGe by rf-sputtering on MgO and Al2O3 substrates. Cu2MnAl can be grown epitaxially with (100)-orientation on MgO (100) and in (110)-orientation on Al2O3 a-plane. The Co based Heusler alloys need metallic seedlayers to induce high quality textured growth. We also have prepared multilayers with smooth interfaces by combining the Heusler compounds with Au and V. An analysis of the ferromagnetic saturation magnetization of the films indicates that the Cu2MnAl-compound tends to grow in the disordered B2-type structure whereas the Co-based Heusler alloy thin films grow in the ordered L21 structure. All multilayers with thin layers of the Heusler compounds exhibit a definitely reduced ferromagnetic magnetization indicating substantial disorder and intermixing at the interfaces.
△ Less
Submitted 14 November, 2002;
originally announced November 2002.
-
Exchange bias in [Co2MnGe/Au],[Co2MnGe/Cr] and [Co2MnGe/Cu2MnAl] multilayers
Authors:
K. Westerholt,
U. Geiersbach,
A. Bergmann
Abstract:
We report structural and magnetic properties of multilayers composed of thin layers of the half metallic ferromagnetic Heusler compound Co2MnGe and layers of Au, Cr and the Heusler compound Cu2MnAl. The hysteresis loops measured at low temperatures reveal the existence of an exchange bias field HEB in all of these multilayers. For the [Co2MnGe/Au] multilayer system HEB is largest reaching up to…
▽ More
We report structural and magnetic properties of multilayers composed of thin layers of the half metallic ferromagnetic Heusler compound Co2MnGe and layers of Au, Cr and the Heusler compound Cu2MnAl. The hysteresis loops measured at low temperatures reveal the existence of an exchange bias field HEB in all of these multilayers. For the [Co2MnGe/Au] multilayer system HEB is largest reaching up to 1 kOe at a temperature of 2 K. We characterize the exchange bias phenomenon in detail and show that it originates from a spin glass type of magnetic order for a thin interlayer at the interfaces. We discuss the results in the light of different models proposed for the explanation of the exchange bias effect.
△ Less
Submitted 11 September, 2002;
originally announced September 2002.
