Showing 1–21 of 21 results for author: Bergman, K

3D photonics for ultra-low energy, high bandwidth-density chip data links

Authors: Stuart Daudlin, Anthony Rizzo, Sunwoo Lee, Devesh Khilwani, Christine Ou, Songli Wang, Asher Novick, Vignesh Gopal, Michael Cullen, Robert Parsons, Alyosha Molnar, Keren Bergman

Abstract: Artificial intelligence (AI) hardware is positioned to unlock revolutionary computational abilities across diverse fields ranging from fundamental science [1] to medicine [2] and environmental science [3] by leveraging advanced semiconductor chips interconnected in vast distributed networks. However, AI chip development has far outpaced that of the networks that connect them, as chip computation s… ▽ More Artificial intelligence (AI) hardware is positioned to unlock revolutionary computational abilities across diverse fields ranging from fundamental science [1] to medicine [2] and environmental science [3] by leveraging advanced semiconductor chips interconnected in vast distributed networks. However, AI chip development has far outpaced that of the networks that connect them, as chip computation speeds have accelerated a thousandfold faster than communication bandwidth over the last two decades [4, 5]. This gap is the largest barrier for scaling AI performance [6, 7] and results from the disproportionately high energy expended to transmit data [8], which is two orders of magnitude more intensive than computing [9]. Here, we show a leveling of this long-standing discrepancy and achieve the lowest energy optical data link to date through dense 3D integration of photonic and electronic chips. At 120 fJ of consumed energy per communicated bit and 5.3 Tb/s bandwidth per square millimeter of chip area, our platform simultaneously achieves a twofold improvement in both energy consumption and bandwidth density relative to prior demonstrations [10, 11]. These improvements are realized through employing massively parallel 80 channel microresonator-based transmitter and receiver arrays operating at 10 Gb/s per channel, occupying a combined chip footprint of only 0.32 mm2. Furthermore, commercial complementary metal-oxide-semiconductor (CMOS) foundries fabricate both the electronic and photonic chips on 300 mm wafers, providing a clear avenue to volume scaling. Through these demonstrated ultra-energy efficient, high bandwidth data communication links, this work eliminates the bandwidth bottleneck between spatially distanced compute nodes and will enable a fundamentally new scale of future AI computing hardware without constraints on data locality. △ Less

Submitted 2 October, 2023; originally announced October 2023.

Efficient Intra-Rack Resource Disaggregation for HPC Using Co-Packaged DWDM Photonics

Authors: George Michelogiannakis, Yehia Arafa, Brandon Cook, Liang Yuan Dai, Abdel Hameed Badawy, Madeleine Glick, Yuyang Wang, Keren Bergman, John Shalf

Abstract: The diversity of workload requirements and increasing hardware heterogeneity in emerging high performance computing (HPC) systems motivate resource disaggregation. Resource disaggregation allows compute and memory resources to be allocated individually as required to each workload. However, it is unclear how to efficiently realize this capability and cost-effectively meet the stringent bandwidth a… ▽ More The diversity of workload requirements and increasing hardware heterogeneity in emerging high performance computing (HPC) systems motivate resource disaggregation. Resource disaggregation allows compute and memory resources to be allocated individually as required to each workload. However, it is unclear how to efficiently realize this capability and cost-effectively meet the stringent bandwidth and latency requirements of HPC applications. To that end, we describe how modern photonics can be co-designed with modern HPC racks to implement flexible intra-rack resource disaggregation and fully meet the bit error rate (BER) and high escape bandwidth of all chip types in modern HPC racks. Our photonic-based disaggregated rack provides an average application speedup of 11% (46% maximum) for 25 CPU and 61% for 24 GPU benchmarks compared to a similar system that instead uses modern electronic switches for disaggregation. Using observed resource usage from a production system, we estimate that an iso-performance intra-rack disaggregated HPC system using photonics would require 4x fewer memory modules and 2x fewer NICs than a non-disaggregated baseline. △ Less

Submitted 17 July, 2023; v1 submitted 9 January, 2023; originally announced January 2023.

Comments: 15 pages, 12 figures, 4 tables. Published in IEEE Cluster 2023

ACM Class: C.2.1

Process Variation-Aware Compact Model of Strip Waveguides for Photonic Circuit Simulation

Authors: Aneek James, Anthony Rizzo, Yuyang Wang, Asher Novick, Songli Wang, Robert Parsons, Kaylx Jang, Maarten Hattink, Keren Bergman

Abstract: We report a novel process variation-aware compact model of strip waveguides that is suitable for circuit-level simulation of waveguide-based process design kit (PDK) elements. The model is shown to describe both loss and -- using a novel expression for the thermo-optic effect in high index contrast materials -- the thermo-optic behavior of strip waveguides. A novel group extraction method enables… ▽ More We report a novel process variation-aware compact model of strip waveguides that is suitable for circuit-level simulation of waveguide-based process design kit (PDK) elements. The model is shown to describe both loss and -- using a novel expression for the thermo-optic effect in high index contrast materials -- the thermo-optic behavior of strip waveguides. A novel group extraction method enables modeling the effective index's ($n_{\mathrm{eff}}$) sensitivity to local process variations without the presumption of variation source. Use of Euler-bend Mach-Zehnder interferometers (MZIs) fabricated in a 300~mm wafer run allow model parameter extraction at widths up to 2.5~$μ$m (highly multi-mode) with strong suppression of higher-order mode excitation. Experimental results prove the reported model can self-consistently describe waveguide phase, loss, and thermo-optic behavior across all measured devices over an unprecedented range of optical bandwidth, waveguide widths, and temperatures. △ Less

Submitted 4 January, 2023; originally announced January 2023.

Journal ref: Journal of Lightwave Technology 41 (2023) 2801 - 2814

Fabrication-Robust Silicon Photonic Devices in Standard Sub-Micron Silicon-on-Insulator Processes

Authors: Anthony Rizzo, Utsav Dave, Asher Novick, Alexandre Freitas, Samantha P. Roberts, Aneek James, Michal Lipson, Keren Bergman

Abstract: Perturbations to the effective refractive index from nanometer-scale fabrication variations in waveguide geometry plague high index-contrast photonic platforms including the ubiquitous sub-micron silicon-on-insulator (SOI) process. Such variations are particularly troublesome for phase-sensitive devices such as interferometers and resonators, which exhibit drastic changes in performance as a resul… ▽ More Perturbations to the effective refractive index from nanometer-scale fabrication variations in waveguide geometry plague high index-contrast photonic platforms including the ubiquitous sub-micron silicon-on-insulator (SOI) process. Such variations are particularly troublesome for phase-sensitive devices such as interferometers and resonators, which exhibit drastic changes in performance as a result of these fabrication-induced phase errors. In this Letter, we propose and experimentally demonstrate a design methodology for dramatically reducing device sensitivity to silicon width variations. We apply this methodology to a highly phase-sensitive device, the ring-assisted Mach Zehnder interferometer (RAMZI), and show comparable performance and footprint to state-of-the-art devices while substantially reducing stochastic phase errors from etch variations. This decrease in sensitivity is directly realized as energy savings by significantly lowering the required corrective thermal tuning power, providing a promising path towards ultra-energy-efficient large-scale silicon photonic circuits. △ Less

Submitted 23 May, 2022; originally announced May 2022.

Massively Scalable Wavelength Diverse Integrated Photonic Linear Neuron

Authors: Matthew van Niekerk, Anthony Rizzo, Hector Rubio Rivera, Gerald Leake, Daniel Coleman, Christopher Tison, Michael Fanto, Keren Bergman, Stefan Preble

Abstract: As computing resource demands continue to escalate in the face of big data, cloud-connectivity and the internet of things, it has become imperative to develop new low-power, scalable architectures. Neuromorphic photonics, or photonic neural networks, have become a feasible solution for the physical implementation of efficient algorithms directly on-chip. This application is primarily due to the li… ▽ More As computing resource demands continue to escalate in the face of big data, cloud-connectivity and the internet of things, it has become imperative to develop new low-power, scalable architectures. Neuromorphic photonics, or photonic neural networks, have become a feasible solution for the physical implementation of efficient algorithms directly on-chip. This application is primarily due to the linear nature of light and the scalability of silicon photonics, specifically leveraging the wide-scale complementary metal-oxide-semiconductor (CMOS) manufacturing infrastructure used to fabricate microelectronics chips. Current neuromorphic photonic implementations stem from two paradigms: wavelength coherent and incoherent. Here, we introduce a novel architecture that supports coherent and incoherent operation to increase the capability and capacity of photonic neural networks with a dramatic reduction in footprint compared to previous demonstrations. As a proof-of-principle, we experimentally demonstrate simple addition and subtraction operations on a foundry-fabricated silicon photonic chip. Additionally, we experimentally validate an on-chip network to predict the logical 2-bit gates AND, OR, and XOR to accuracies of $96.8\%, 99\%,$ and $98.5\%$, respectively. This architecture is compatible with highly wavelength parallel sources, enabling massively scalable photonic neural networks. △ Less

Submitted 25 August, 2022; v1 submitted 11 May, 2022; originally announced May 2022.

Integrated Kerr frequency comb-driven silicon photonic transmitter

Authors: Anthony Rizzo, Asher Novick, Vignesh Gopal, Bok Young Kim, Xingchen Ji, Stuart Daudlin, Yoshitomo Okawachi, Qixiang Cheng, Michal Lipson, Alexander L. Gaeta, Keren Bergman

Abstract: The exponential growth of computing needs for artificial intelligence and machine learning has had a dramatic impact on data centre energy consumption, which has risen to environmentally significant levels. Using light to send information between compute nodes can dramatically decrease this energy consumption while simultaneously increasing bandwidth. Through wavelength-division multiplexing with… ▽ More The exponential growth of computing needs for artificial intelligence and machine learning has had a dramatic impact on data centre energy consumption, which has risen to environmentally significant levels. Using light to send information between compute nodes can dramatically decrease this energy consumption while simultaneously increasing bandwidth. Through wavelength-division multiplexing with chip-based microresonator Kerr frequency combs, independent information channels can be encoded onto many distinct colours of light in the same optical fibre for massively parallel data transmission with low energy. While previous demonstrations have relied on benchtop equipment for filtering and modulating Kerr comb wavelength channels, data centre interconnects require a compact on-chip form factor for these operations. Here, we demonstrate the first integrated silicon photonic transmitter using a Kerr comb source. The demonstrated architecture is scalable to hundreds of wavelength channels, enabling a fundamentally new class of massively parallel terabit-scale optical interconnects for future green hyperscale data centres. △ Less

Submitted 8 September, 2021; originally announced September 2021.

A COLREGs-Compliant Motion Planner for Autonomous Maneuvering of Marine Vessels in Complex Environments

Authors: Kristoffer Bergman, Oskar Ljungqvist, Jonas Linder, Daniel Axehill

Abstract: An enabling technology for future sea transports is safe and energy-efficient autonomous maritime navigation in narrow environments with other marine vessels present. This requires that the algorithm controlling the ship is able to account for the vessel's dynamics, and obeys the rules specified in the international regulations for preventing collision at sea (COLREGs). To account for these proper… ▽ More An enabling technology for future sea transports is safe and energy-efficient autonomous maritime navigation in narrow environments with other marine vessels present. This requires that the algorithm controlling the ship is able to account for the vessel's dynamics, and obeys the rules specified in the international regulations for preventing collision at sea (COLREGs). To account for these properties, this work proposes a two-step optimization-based and COLREGs-compliant motion planner tailored for large vessels. In the first step, a lattice-based motion planner is used to compute a suboptimal trajectory based on a library of precomputed motion primitives. To comply with the rules specified in COLREGs, the lattice-based planner is augmented with discrete states that represent what type of COLREGs situations that are active with respect to other nearby vessels. The trajectory computed by the lattice-based planner is then used as warm-start for the second receding-horizon step based on direct optimal control techniques. The aim of the second step is to solve the problem to local optimality with the discrete COLREGs states remained fixed. The applicability of the proposed motion planner is demonstrated in simulations, where it computes energy-efficient and COLREGs-compliant trajectories. The results also show that the motion planner is able to prevent complex collision situations from occurring. △ Less

Submitted 28 January, 2021; v1 submitted 22 December, 2020; originally announced December 2020.

Comments: Submitted to the IEEE Journal of Oceanic Engineering

COUDER: Robust Topology Engineering for Optical Circuit Switched Data Center Networks

Authors: Min Yee Teh, Shizhen Zhao, Peirui Cao, Keren Bergman

Abstract: Many optical circuit switched data center networks (DCN) have been proposed in the past to attain higher capacity and topology reconfigurability, though commercial adoption of these architectures have been minimal. One major challenge these architectures face is the difficulty of handling uncertain traffic demands using commercial optical circuit switches (OCS) with high switching latency. Prior w… ▽ More Many optical circuit switched data center networks (DCN) have been proposed in the past to attain higher capacity and topology reconfigurability, though commercial adoption of these architectures have been minimal. One major challenge these architectures face is the difficulty of handling uncertain traffic demands using commercial optical circuit switches (OCS) with high switching latency. Prior works have generally focused on develo** fast-switching OCS prototypes to quickly react to traffic changes through frequent reconfigurations. This approach, however, adds tremendous complexity to the control plane, and raises the barrier for commercial adoption of optical circuit switched data center networks. We propose COUDER, a robust topology and routing optimization framework for reconfigurable optical circuit switched data centers. COUDER optimizes topology and routing based on a convex set of traffic matrices, and offers strict throughput guarantees for any future traffic matrices bounded by the convex set. For the bursty traffic demands that are unbounded by the convex set, we employ a desensitization technique to reduce performance hit. This enables COUDER to generate topology and routing solutions capable of handling unexpected traffic changes without relying on frequent topology reconfigurations. Our extensive evaluations based on Facebook's production DCN traces show that, even with daily reconfiguration, COUDER achieves about 20\% higher throughput, and about 32\% lower average hop count compared to cost-equivalent static topologies. Our work shows that adoption of reconfigurable topologies in commercial DCNs is feasible even without fast OCSs. △ Less

Submitted 30 September, 2020; originally announced October 2020.

Optically Connected Memory for Disaggregated Data Centers

Authors: Jorge Gonzalez, Alexander Gazman, Maarten Hattink, Mauricio G. Palma, Meisam Bahadori, Ruth Rubio-Noriega, Lois Orosa, Madeleine Glick, Onur Mutlu, Keren Bergman, Rodolfo Azevedo

Abstract: Recent advances in integrated photonics enable the implementation of reconfigurable, high-bandwidth, and low energy-per-bit interconnects in next-generation data centers. We propose and evaluate an Optically Connected Memory (OCM) architecture that disaggregates the main memory from the computation nodes in data centers. OCM is based on micro-ring resonators (MRRs), and it does not require any mod… ▽ More Recent advances in integrated photonics enable the implementation of reconfigurable, high-bandwidth, and low energy-per-bit interconnects in next-generation data centers. We propose and evaluate an Optically Connected Memory (OCM) architecture that disaggregates the main memory from the computation nodes in data centers. OCM is based on micro-ring resonators (MRRs), and it does not require any modification to the DRAM memory modules. We calculate energy consumption from real photonic devices and integrate them into a system simulator to evaluate performance. Our results show that (1) OCM is capable of interconnecting four DDR4 memory channels to a computing node using two fibers with 1.07 pJ energy-per-bit consumption and (2) OCM performs up to 5.5x faster than a disaggregated memory with 40G PCIe NIC connectors to computing nodes. △ Less

Submitted 24 August, 2020; originally announced August 2020.

Comments: This work is to appear at SBAC-PAD 2020

An Optimization-Based Motion Planner for Autonomous Maneuvering of Marine Vessels in Complex Environments

Authors: Kristoffer Bergman, Oskar Ljungqvist, Jonas Linder, Daniel Axehill

Abstract: The task of maneuvering ships in confined environments is a difficult task for a human operator. One major reason is due to the complex and slow dynamics of the ship which need to be accounted for in order to successfully steer the vehicle. In this work, a two-step optimization-based motion planner is proposed for autonomous maneuvering of ships in constrained environments such as harbors. A latti… ▽ More The task of maneuvering ships in confined environments is a difficult task for a human operator. One major reason is due to the complex and slow dynamics of the ship which need to be accounted for in order to successfully steer the vehicle. In this work, a two-step optimization-based motion planner is proposed for autonomous maneuvering of ships in constrained environments such as harbors. A lattice-based motion planner is used in a first step to compute a feasible, but suboptimal solution to a discretized version of the motion planning problem. This solution is then used to enable efficient warm-start and as a terminal manifold for a second receding-horizon improvement step. Both steps of the algorithm use a high-fidelity model of the ship to plan feasible and energy-efficient trajectories. Moreover, a novel algorithm is proposed for automatic computation of spatial safety envelopes around the trajectory computed by the lattice-based planner. These safety envelopes are used in the second improvement step to obtain collision-avoidance constraints which complexity scales very well with an increased number of surrounding obstacles. The proposed optimization-based motion planner is evaluated with successful results in a simulation study for autonomous docking problems in a model of the Cape Town~harbor. △ Less

Submitted 6 May, 2020; originally announced May 2020.

Comments: Manuscript submitted to CDC20

METTEOR: Robust Multi-Traffic Topology Engineering for Commercial Data Center Networks

Authors: Min Yee Teh, Shizhen Zhao, Keren Bergman

Abstract: Numerous optical circuit switched data center networks have been proposed over the past decade for higher capacity, though commercial adoption of these architectures have been minimal so far. One major challenge commonly facing these architectures is the difficulty of handling bursty traffic with optical circuit switches (OCS) with high switching latency. Prior works generally rely on fast-switchi… ▽ More Numerous optical circuit switched data center networks have been proposed over the past decade for higher capacity, though commercial adoption of these architectures have been minimal so far. One major challenge commonly facing these architectures is the difficulty of handling bursty traffic with optical circuit switches (OCS) with high switching latency. Prior works generally rely on fast-switching OCS prototypes to better react to traffic changes via frequent reconfigurations. This approach, unfortunately, adds further complexity to the control plane. We propose METTEOR, an easily deployable solution for optical circuit switched data centers, that is designed for the current capabilities of commercial OCSs. Using multiple predicted traffic matrices, METTEOR designs data center topologies that are less sensitive to traffic changes, thus eliminating the need of frequently reconfiguring OCSs upon traffic changes. Results based on extensive evaluations using production traces show that METTEOR increases the percentage of direct-hop traffic by about 80% over a fat tree at comparable cost, and by about 30% over a uniform mesh, at comparable maximum link utilizations. Compared to ideal solutions that reconfigure OCSs on every traffic matrix, METTEOR achieves close-to-optimal bandwidth utilization even with biweekly reconfiguration. This drastically lowers the controller and management complexity needed to perform METTEOR in commercial settings. △ Less

Submitted 2 February, 2020; originally announced February 2020.

ACM Class: C.2.1

Optimization-based motion planning for multi-steered articulated vehicles

Authors: Oskar Ljungqvist, Kristoffer Bergman, Daniel Axehill

Abstract: The task of maneuvering a multi-steered articulated vehicle in confined environments is difficult even for experienced drivers. In this work, we present an optimization-based trajectory planner targeting low-speed maneuvers in unstructured environments for multi-steered N-trailer vehicles, which are comprised of a car-like tractor and an arbitrary number of interconnected trailers with fixed or st… ▽ More The task of maneuvering a multi-steered articulated vehicle in confined environments is difficult even for experienced drivers. In this work, we present an optimization-based trajectory planner targeting low-speed maneuvers in unstructured environments for multi-steered N-trailer vehicles, which are comprised of a car-like tractor and an arbitrary number of interconnected trailers with fixed or steerable wheels. The proposed trajectory planning framework is divided into two steps, where a lattice-based trajectory planner is used in a first step to compute a resolution optimal solution to a discretized version of the trajectory planning problem. The output from the lattice planner is then used in a second step to initialize an optimal control problem solver, which enables the framework to compute locally optimal trajectories that start at the vehicle's initial state and reaches the goal state exactly. The performance of the proposed optimization-based trajectory planner is evaluated in a set of practically relevant scenarios for a multi-steered 3-trailer vehicle with a car-like tractor where the last trailer is steerable. △ Less

Submitted 2 March, 2020; v1 submitted 12 December, 2019; originally announced December 2019.

Comments: Accepted to Proceeding of IFAC World Congress 2020

An Optimization-Based Receding Horizon Trajectory Planning Algorithm

Authors: Kristoffer Bergman, Oskar Ljungqvist, Torkel Glad, Daniel Axehill

Abstract: This paper presents an optimization-based receding horizon trajectory planning algorithm for dynamical systems operating in unstructured and cluttered environments. The proposed approach is a two-step procedure that uses a motion planning algorithm in a first step to efficiently find a feasible, but possibly suboptimal, nominal solution to the trajectory planning problem where in particular the co… ▽ More This paper presents an optimization-based receding horizon trajectory planning algorithm for dynamical systems operating in unstructured and cluttered environments. The proposed approach is a two-step procedure that uses a motion planning algorithm in a first step to efficiently find a feasible, but possibly suboptimal, nominal solution to the trajectory planning problem where in particular the combinatorial aspects of the problem are solved. The resulting nominal trajectory is then improved in a second optimization-based receding horizon planning step which performs local trajectory refinement over a sliding time window. In the second step, the nominal trajectory is used in a novel way to both represent a terminal manifold and obtain an upper bound on the cost-to-go online. This enables the possibility to provide theoretical guarantees in terms of recursive feasibility, objective function value, and convergence to the desired terminal state. The established theoretical guarantees and the performance of the proposed algorithm are verified in a set of challenging trajectory planning scenarios for a truck and trailer system. △ Less

Submitted 11 December, 2019; originally announced December 2019.

Comments: Submitted for IFAC World Congress 2020

Improved Path Planning by Tightly Combining Lattice-based Path Planning and Numerical Optimal Control

Authors: Kristoffer Bergman, Oskar Ljungqvist, Daniel Axehill

Abstract: This paper presents a unified optimization-based path planning approach to efficiently compute locally optimal solutions to advanced path planning problems. The approach is motivated by first showing that a lattice-based path planner can be cast and analyzed as a bilevel optimization problem. This information is then used to tightly integrate a lattice-based path planner and numerical optimal cont… ▽ More This paper presents a unified optimization-based path planning approach to efficiently compute locally optimal solutions to advanced path planning problems. The approach is motivated by first showing that a lattice-based path planner can be cast and analyzed as a bilevel optimization problem. This information is then used to tightly integrate a lattice-based path planner and numerical optimal control in a novel way. The lattice-based path planner is applied to the problem in a first step using a discretized search space, where system dynamics and objective function are chosen to coincide with those used in a second numerical optimal control step. As a consequence, the lattice planner provides the numerical optimal control step with a resolution optimal solution to the problem, which is highly suitable as a warm-start to the second step. This novel tight combination of a sampling-based path planner and numerical optimal control makes, in a structured way, benefit of the former method's ability to solve combinatorial parts of the problem and the latter method's ability to obtain locally optimal solutions not constrained to a discretized search space. Compared to previously presented combinations of sampling-based path planners and optimization, the proposed approach is shown in several path planning experiments to provide significant improvements in terms of computation time, numerical reliability, and objective function value. △ Less

Submitted 25 March, 2019; v1 submitted 19 March, 2019; originally announced March 2019.

Comments: Submitted to CDC2019

Improved Optimization of Motion Primitives for Motion Planning in State Lattices

Authors: Kristoffer Bergman, Oskar Ljungqvist, Daniel Axehill

Abstract: In this paper, we propose a framework for generating motion primitives for lattice-based motion planners automatically. Given a family of systems, the user only needs to specify which principle types of motions, which are here denoted maneuvers, that are relevant for the considered system family. Based on the selected maneuver types and a selected system instance, the algorithm not only automatica… ▽ More In this paper, we propose a framework for generating motion primitives for lattice-based motion planners automatically. Given a family of systems, the user only needs to specify which principle types of motions, which are here denoted maneuvers, that are relevant for the considered system family. Based on the selected maneuver types and a selected system instance, the algorithm not only automatically optimizes the motions connecting pre-defined boundary conditions, but also simultaneously optimizes the end-point boundary conditions as well. This significantly reduces the time consuming part of manually specifying all boundary value problems that should be solved, and no exhaustive search to generate feasible motions is required. In addition to handling static a priori known system parameters, the framework also allows for fast automatic re-optimization of motion primitives if the system parameters change while the system is in use, e.g, if the load significantly changes or a trailer with a new geometry is picked up by an autonomous truck. We also show in several numerical examples that the framework can enhance the performance of the motion planner in terms of total cost for the produced solution. △ Less

Submitted 1 February, 2019; v1 submitted 17 October, 2018; originally announced October 2018.

Comments: Manuscript updated after reviewer comments and submitted to IV 2019

Combining Homotopy Methods and Numerical Optimal Control to Solve Motion Planning Problems

Authors: Kristoffer Bergman, Daniel Axehill

Abstract: This paper presents a systematic approach for computing local solutions to motion planning problems in non-convex environments using numerical optimal control techniques. It extends the range of use of state-of-the-art numerical optimal control tools to problem classes where these tools have previously not been applicable. Today these problems are typically solved using motion planners based on ra… ▽ More This paper presents a systematic approach for computing local solutions to motion planning problems in non-convex environments using numerical optimal control techniques. It extends the range of use of state-of-the-art numerical optimal control tools to problem classes where these tools have previously not been applicable. Today these problems are typically solved using motion planners based on randomized or graph search. The general principle is to define a homotopy that perturbs, or preferably relaxes, the original problem to an easily solved problem. By combining a Sequential Quadratic Programming (SQP) method with a homotopy approach that gradually transforms the problem from a relaxed one to the original one, practically relevant locally optimal solutions to the motion planning problem can be computed. The approach is demonstrated in motion planning problems in challenging 2D and 3D environments, where the presented method significantly outperforms a state-of-the-art open-source optimizing sampled-based planner commonly used as benchmark. △ Less

Submitted 2 October, 2017; v1 submitted 22 March, 2017; originally announced March 2017.

Software-Defined Silicon Photonics based Metro Node for Spatial and Wavelength Superchannel Switching

Authors: Vidak Vujicic, Aravind P. Anthur, Alexander Gazman, Colm Browning, M. Deseada Gutierrez Pascual, Ziyi Zhu, Keren Bergman, Liam P. Barry

Abstract: Due to the growing popularity of optical superchannels and software defined networking, reconfigurable optical add-drop multiplexer (ROADM) architectures for superchannel switching have recently attracted significant attention. ROADMs based on micro electro-mechanical system (MEMS) and liquid crystal-on-silicon (LCoS) technologies are predominantly used. Motivated by requirements for low power, hi… ▽ More Due to the growing popularity of optical superchannels and software defined networking, reconfigurable optical add-drop multiplexer (ROADM) architectures for superchannel switching have recently attracted significant attention. ROADMs based on micro electro-mechanical system (MEMS) and liquid crystal-on-silicon (LCoS) technologies are predominantly used. Motivated by requirements for low power, high-speed, small area footprint and compact switching solutions, we propose and demonstrate spatial and wavelength flexible superchannel switching using monolithically integrated silicon photonics (SiP) micro-ring resonators (MRR). We demonstrate the MRRs capabilities and potential to be used as a fundamental building block in ROADMs. Unicast and multicast switching operation of an entire superchannel is demonstrated after transmission over 50 km of standard single mode fiber. The performance of each sub-channel from the 120 Gb/s QPSK Nyquist superchannel is analyzed and degradation in error vector magnitude performance was observed for outer sub-channels due to the 3-dB bandwidth of the MRRs, which is comparable with the superchannel bandwidth. However, all sub-channels for all switching cases (unicast, multicast and bi-directional operation) exhibit performance far below the 7% FEC limit. The switching time of the SiP MRR chip is such that high capacity superchannel interconnects between users can be setup and reconfigured on the microsecond timescale. △ Less

Submitted 9 February, 2017; v1 submitted 29 November, 2016; originally announced December 2016.

A highly scalable fully non-blocking silicon photonic switch fabric

Authors: Dessislava Nikolova, David M. Calhoun, Yang Liu, Sebastien Rumley, Ari Novack, Tom Baehr-Jones, Michael Hochberg, Keren Bergman

Abstract: Large port count spatial optical switches will facilitate flexible and energy efficient data movement in future data communications systems, especially if they are capable of nanosecond-order reconfiguration times. In this work, we demonstrate an 8x8 microring-based silicon photonic switch with software controlled switching. The proposed switch architecture is modular as it assembles multiple iden… ▽ More Large port count spatial optical switches will facilitate flexible and energy efficient data movement in future data communications systems, especially if they are capable of nanosecond-order reconfiguration times. In this work, we demonstrate an 8x8 microring-based silicon photonic switch with software controlled switching. The proposed switch architecture is modular as it assembles multiple identical components with multiplexing/demultiplexing functionalities. The switch is fully non-blocking, has path independent insertion loss, low crosstalk and is straightforward to control. A scalability analysis shows that this architecture can scale to very large port counts. This work represents the first demonstration of real-time firmware controlled switching with silicon photonics devices integrated at the chip scale. △ Less

Submitted 31 December, 2015; originally announced December 2015.

Comments: 25 pages, 8 figures

Integrated switch for simultaneous mode-division multiplexing (MDM) and wavelength-division multiplexing (WDM)

Authors: Brian Stern, Xiaoliang Zhu, Christine P. Chen, Lawrence D. Tzuang, Jaime Cardenas, Keren Bergman, Michal Lipson

Abstract: Leveraging the spatial modes of multimode waveguides using mode-division multiplexing (MDM) on an integrated photonic chip allows unprecedented scaling of bandwidth density for on-chip communication. Switching channels between waveguides is critical for future scalable optical networks, but its implementation in multimode waveguides must address how to simultaneously control modes with vastly diff… ▽ More Leveraging the spatial modes of multimode waveguides using mode-division multiplexing (MDM) on an integrated photonic chip allows unprecedented scaling of bandwidth density for on-chip communication. Switching channels between waveguides is critical for future scalable optical networks, but its implementation in multimode waveguides must address how to simultaneously control modes with vastly different optical properties. Here we present a platform for switching signals between multimode waveguides based on individually processing the spatial mode channels using single-mode elements. Using this wavelength-division multiplexing (WDM) compatible platform, we demonstrate a 1x2 multimode switch for a silicon chip which routes four data channels with low (<-20 dB) crosstalk. We show bit-error rates below 10^-9 and power penalties below 1.4 dB on all channels while routing 10 Gbps data when each channel is input and routed separately. The switch exhibits an additional power penalty of less than 2.4 dB when all four channels are simultaneously routed. △ Less

Submitted 16 February, 2015; originally announced February 2015.

Comments: 13 pages; 6 figures

Extrinsic Photodiodes for Integrated Mid-Infrared Silicon Photonics

Authors: Richard R. Grote, Brian Souhan, Noam Ophir, Jeffrey B. Driscoll, Keren Bergman, Hassaram Bakhru, William M. J. Green, Richard M. Osgood Jr

Abstract: Silicon photonics has recently been proposed for a diverse set of applications at mid-infrared wavelengths, the implementation of which require on-chip photodetectors. In planar geometries, dopant-based extrinsic photoconductors have long been used for mid-infrared detection with Si and Ge acting as host materials. Leveraging the dopant-induced sub-bandgap trap-states used in bulk photoconductors… ▽ More Silicon photonics has recently been proposed for a diverse set of applications at mid-infrared wavelengths, the implementation of which require on-chip photodetectors. In planar geometries, dopant-based extrinsic photoconductors have long been used for mid-infrared detection with Si and Ge acting as host materials. Leveraging the dopant-induced sub-bandgap trap-states used in bulk photoconductors for waveguide integrated mid-infrared detectors offers simple processing, integration, and operation throughout the mid-infrared by appropriate choice of dopant. In particular, Si doped with Zn forms two trap levels ~ 0.3 eV and ~ 0.58 eV above the valence band, and has been utilized extensively for cryogenically cooled bulk extrinsic photoconductors. In this letter, we present room temperature operation of Zn+ implanted Si waveguide photodiodes from 2200 nm to 2400 nm, with measured responsivities of up to 87 mA/W and low dark currents of < 10 microamps. △ Less

Submitted 24 June, 2014; originally announced June 2014.

Simultaneous Mode and Wavelength Division Multiplexing On-Chip

Authors: Lian-Wee Luo, Noam Ophir, Christine Chen, Lucas H. Gabrielli, Carl B. Poitras, Keren Bergman, Michal Lipson

Abstract: Significant effort in optical-fiber research has been put in recent years into realizing mode-division multiplexing (MDM) in conjunction with wavelength-division multiplexing (WDM) to enable further scaling of the communication bandwidth per fiber. In contrast almost all integrated photonics operate exclusively in the single-mode regime. MDM is rarely considered for integrated photonics due to the… ▽ More Significant effort in optical-fiber research has been put in recent years into realizing mode-division multiplexing (MDM) in conjunction with wavelength-division multiplexing (WDM) to enable further scaling of the communication bandwidth per fiber. In contrast almost all integrated photonics operate exclusively in the single-mode regime. MDM is rarely considered for integrated photonics due to the difficulty in coupling selectively to high-order modes which usually results in high inter-modal crosstalk. Here we show the first demonstration of simultaneous on-chip mode and wavelength division multiplexing with low modal crosstalk and loss. Our approach can potentially increase the aggregate data rate by many times for on-chip ultra-high bandwidth communications. △ Less

Submitted 10 June, 2013; originally announced June 2013.