-
A better compression driver? CutFEM 3D shape optimization taking viscothermal losses into account
Authors:
Martin Berggren,
Anders Bernland,
André Massing,
Daniel Noreland,
Eddie Wadbro
Abstract:
The compression driver, the standard sound source for midrange acoustic horns, contains a cylindrical compression chamber connected to the horn throat through a system of channels known as a phase plug. The main challenge in the design of the phase plug is to avoid resonance and interference phenomena. The complexity of these phenomena makes it difficult to carry out this design task manually, par…
▽ More
The compression driver, the standard sound source for midrange acoustic horns, contains a cylindrical compression chamber connected to the horn throat through a system of channels known as a phase plug. The main challenge in the design of the phase plug is to avoid resonance and interference phenomena. The complexity of these phenomena makes it difficult to carry out this design task manually, particularly when the phase-plug channels are radially oriented. Therefore, we employ an algorithmic technique that combines numerical solutions of the governing equations with a gradient-based optimization algorithm that can deform the walls of the phase plug. A particular modeling challenge here is that viscothermal losses cannot be ignored, due to narrow chambers and slits in the device. Fortunately, a recently developed, accurate, but computationally inexpensive boundary-layer model is applicable. We use this model, a level-set geometry description, and the Cut Finite Element technique to avoid mesh changes when the geometry is modified by the optimization algorithm. Moreover, the shape calculus needed to compute derivatives for the optimization algorithm is carried out in the fully discrete case. Applying these techniques, the algorithm was able to successfully design the shape of a set of radially-directed phase plugs so that the final frequency response surprisingly closely matches the ideal response, derived by a lumped circuit model where wave interference effects are not accounted for. This result may serve to resuscitate the radial phase plug design, rarely used in today's commercial compression drivers.
△ Less
Submitted 14 March, 2024;
originally announced March 2024.
-
Organic electrochemical neurons and synapses with ion mediated spiking
Authors:
H. Padinhare,
C. Yang,
D. Tu,
J. Gerasimov,
A. M. M. Dar,
A. A. Moreira,
M. Massetti,
R. Kroon,
D. Bliman,
R. Olsson,
E. Stavrinidou,
M. Berggren,
S. Fabiano
Abstract:
Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio…
▽ More
Future brain-machine interfaces, prosthetics, and intelligent soft robotics will require integrating artificial neuromorphic devices with biological systems. Due to their poor biocompatibility, circuit complexity, low energy efficiency, and operating principles fundamentally different from the ion signal modulation of biology, traditional Silicon-based neuromorphic implementations have limited bio-integration potential. Here, we report the first organic electrochemical neurons (OECNs) with ion-modulated spiking, based on allprinted complementary organic electrochemical transistors. We demonstrate facile biointegration of OECNs with Venus Flytrap (Dionaea muscipula) to induce lobe closure upon input stimuli. The OECNs can also be integrated with all-printed organic electrochemical synapses (OECSs), exhibiting short-term plasticity with paired-pulse facilitation and longterm plasticity with retention >1000 s, facilitating Hebbian learning. These soft and flexible OECNs operate below 0.6 V and respond to multiple stimuli, defining a new vista for localized artificial neuronal systems possible to integrate with bio-signaling systems of plants, invertebrates, and vertebrates.
△ Less
Submitted 18 January, 2024;
originally announced March 2024.
-
Rational Materials Design for In Operando Electropolymerization of Evolvable Organic Electrochemical Transistors
Authors:
J. Y. Gerasimov,
A. Halder,
A. H. Mousa,
S. Ghosh,
P. C. Harikesh,
T. Abrahamsson,
D. Bliman,
J. Strandberg,
M. Massetti,
I. Zozoulenko,
D. T. Simon,
M. Berggren,
R. Olsson,
S. Fabiano
Abstract:
Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The…
▽ More
Organic electrochemical transistors formed by in operando electropolymerization of the semiconducting channel are increasingly becoming recognized as a simple and effective implementation of synapses in neuromorphic hardware. However, very few studies have reported the requirements that must be met to ensure that the polymer spreads along the substrate to form a functional conducting channel. The nature of the interface between the substrate and various monomer precursors of conducting polymers through molecular dynamics simulations is investigated, showing that monomer adsorption to the substrate produces an increase in the effective monomer concentration at the surface. By evaluating combinatorial couples of monomers baring various sidechains with differently functionalized substrates, it is shown that the interactions between the substrate and the monomer precursor control the lateral growth of a polymer film along an inert substrate. This effect has implications for fabricating synaptic systems on inexpensive, flexible substrates.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Synergistic Effect of Multi-Walled Carbon Nanotubes and Ladder-Type Conjugated Polymers on the Performance of N-Type Organic Electrochemical Transistors
Authors:
S. Zhang,
M. Massetti,
T. P. Ruoko,
D. Tu,
C. Y. Yang,
X. Liu,
Z. Wu,
Y. Lee,
R. Kroon,
P. Persson,
H. Y. Woo,
M. Berggren,
C. Müller,
M. Fahlman,
S. Fabiano
Abstract:
Organic electrochemical transistors (OECTs) have the potential to revolutionize the field of organic bioelectronics. To date, most of the reported OECTs include p-type (semi-)conducting polymers as the channel material, while n-type OECTs are yet at an early stage of development, with the best performing electron-transporting materials still suffering from low transconductance, low electron mobili…
▽ More
Organic electrochemical transistors (OECTs) have the potential to revolutionize the field of organic bioelectronics. To date, most of the reported OECTs include p-type (semi-)conducting polymers as the channel material, while n-type OECTs are yet at an early stage of development, with the best performing electron-transporting materials still suffering from low transconductance, low electron mobility, and slow response time. Here, the high electrical conductivity of multi-walled carbon nanotubes (MWCNTs) and the large volumetric capacitance of the ladder-type π-conjugated redox polymer poly(benzimidazobenzophenanthroline) (BBL) are leveraged to develop n-type OECTs with record-high performance. It is demonstrated that the use of MWCNTs enhances the electron mobility by more than one order of magnitude, yielding fast transistor transient response (down to 15 ms) and high uC* (electron mobility x volumetric capacitance) of about 1 F/cmVs. This enables the development of complementary inverters with a voltage gain of > 16 and a large worst-case noise margin at a supply voltage of < 0.6 V, while consuming less than 1 uW of power.
△ Less
Submitted 18 January, 2024;
originally announced January 2024.
-
Focus topics for the ECFA study on Higgs / Top / EW factories
Authors:
Jorge de Blas,
Patrick Koppenburg,
Jenny List,
Fabio Maltoni,
Juan Alcaraz Maestre,
Juliette Alimena,
John Alison,
Patrizia Azzi,
Paolo Azzurri,
Emanuele Bagnaschi,
Timothy Barklow,
Matthew J. Basso,
Josh Bendavid,
Martin Beneke,
Eli Ben-Haim,
Mikael Berggren,
Marzia Bordone,
Ivanka Bozovic,
Valentina Cairo,
Nuno Filipe Castro,
Marina Cobal,
Paula Collins,
Mogens Dam,
Valerio Dao,
Matteo Defranchis
, et al. (83 additional authors not shown)
Abstract:
In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.
In order to stimulate new engagement and trigger some concrete studies in areas where further work would be beneficial towards fully understanding the physics potential of an $e^+e^-$ Higgs / Top / Electroweak factory, we propose to define a set of focus topics. The general reasoning and the proposed topics are described in this document.
△ Less
Submitted 18 January, 2024; v1 submitted 15 January, 2024;
originally announced January 2024.
-
Implementation, performance and physics impact of particle identification at Higgs factories
Authors:
Ulrich Einhaus,
Matthew Basso,
Mikael Berggren,
Valentina Cairo,
Bohdan Dudar,
Jenny List
Abstract:
This work introduces the software tool Comprehensive Particle Identification (CPID). It is a modular approach to combined PID for future Higgs factories and implemented in the Key4hep framework. Its structure is explained, the current module library laid out and initial performance measures for the ILD detector as an example presented. A basic run of CPID works already as well as the default full-…
▽ More
This work introduces the software tool Comprehensive Particle Identification (CPID). It is a modular approach to combined PID for future Higgs factories and implemented in the Key4hep framework. Its structure is explained, the current module library laid out and initial performance measures for the ILD detector as an example presented. A basic run of CPID works already as well as the default full-simulation ILD PID reconstruction, but allows for an easy and convenient addition of more PID observables, improving PID performance in future analyses and high-level reconstruction, such as strange tagging.
△ Less
Submitted 15 November, 2023;
originally announced November 2023.
-
Tuning Pythia8 for future $e^+e^-$ colliders
Authors:
Zhijie Zhao,
Mikael Berggren,
Jenny List
Abstract:
The majority of Monte-Carlo (MC) simulation campaigns for future $e^+e^-$ colliders has so far been based on the leading-order (LO) matrix elements provided by Whizard 1.95, followed by parton shower and hadronization in Pythia6, using the tune of the OPAL experiment at LEP. In this contribution, we test and develop the interface between Whizard3 and Pythia8. As a first step, we simulate the…
▽ More
The majority of Monte-Carlo (MC) simulation campaigns for future $e^+e^-$ colliders has so far been based on the leading-order (LO) matrix elements provided by Whizard 1.95, followed by parton shower and hadronization in Pythia6, using the tune of the OPAL experiment at LEP. In this contribution, we test and develop the interface between Whizard3 and Pythia8. As a first step, we simulate the $e^+e^-\to q\bar{q}$ process with LO matrix elements, and compare three tunes in Pythia8: the standard Pythia8 tune, the OPAL tune and the ALEPH tune. At stable-hadron level, predictions of charged and neutral hadron multiplicities of these tunes are compared to LEP data, since they are strongly relevant to the performance of particle flow algorithms.
The events are used to perform a full detector simulation and reconstruction of the International Large Detector concept (ILD) as an example for a particle-flow-optimised detector. At reconstruction level, a comparison of the jet energy resolution in these tunes is presented. We found good agreement with previous results that were simulated by Whizard1+Pythia6. In addition, the preliminary next-to-leading order (NLO) results are also presented. This modern MC simulation chain, with matched NLO matrix elements in the future, should be introduced to ILC or other future $e^+e^-$ colliders.
△ Less
Submitted 31 August, 2023; v1 submitted 28 July, 2023;
originally announced July 2023.
-
Search for new particles at the ILC
Authors:
Mikael Berggren
Abstract:
The LHC experiments have searched for and excluded many proposed Beyond the Standard Model (BSM) theories. However, there are many scenarios where LHC has little or no sensitivity. Electron-positron colliders offers a different avenue for searches for such phenomena.In this talk, we will review the expectations for searches for number of BSM models at the International Linear Collider (ILC). We wi…
▽ More
The LHC experiments have searched for and excluded many proposed Beyond the Standard Model (BSM) theories. However, there are many scenarios where LHC has little or no sensitivity. Electron-positron colliders offers a different avenue for searches for such phenomena.In this talk, we will review the expectations for searches for number of BSM models at the International Linear Collider (ILC). We will discuss new Higgs-like scalars, indirect BSM via Standard Model Effective Field Theory (SMEFT) fits, mono-photons, and SUSY in strongly or moderately compressed models.
△ Less
Submitted 12 December, 2022;
originally announced December 2022.
-
A biologically interfaced evolvable organic pattern classifier
Authors:
Jennifer Gerasimov,
Deyu Tu,
Vivek Hitaishi,
Padinhare Cholakkal Harikesh,
Chi-Yuan Yang,
Tobias Abrahamsson,
Meysam Rad,
Mary J. Donahue,
Malin Silverå Ejneby,
Magnus Berggren,
Robert Forchheimer,
Simone Fabiano
Abstract:
Future brain-computer interfaces will require local and highly individualized signal processing of fully integrated electronic circuits within the nervous system and other living tissue. New devices will need to be developed that can receive data from a sensor array, process data into meaningful information, and translate that information into a format that living systems can interpret. Here, we r…
▽ More
Future brain-computer interfaces will require local and highly individualized signal processing of fully integrated electronic circuits within the nervous system and other living tissue. New devices will need to be developed that can receive data from a sensor array, process data into meaningful information, and translate that information into a format that living systems can interpret. Here, we report the first example of interfacing a hardware-based pattern classifier with a biological nerve. The classifier implements the Widrow-Hoff learning algorithm on an array of evolvable organic electrochemical transistors (EOECTs). The EOECTs' channel conductance is modulated in situ by electropolymerizing the semiconductor material within the channel, allowing for low voltage operation, high reproducibility, and an improvement in state retention of two orders of magnitude over state-of-the-art OECT devices. The organic classifier is interfaced with a biological nerve using an organic electrochemical spiking neuron to translate the classifier's output to a simulated action potential. The latter is then used to stimulate muscle contraction selectively based on the input pattern, thus paving the way for the development of closed-loop therapeutic systems.
△ Less
Submitted 29 November, 2022;
originally announced November 2022.
-
Stau searches and measurements with the ILD concept at the International Linear Collider
Authors:
M. T. Núñez Pardo de Vera,
M. Berggren,
J. List
Abstract:
One of the most interesting channels to search for SUSY is the direct pair-production of the $τ$-lepton superpartner, $\widetildeτ$. The $\widetildeτ$ is with high probability the lightest of the scalar leptons, so one of the first SUSY particles that can be observerd, and the signature of $\widetildeτ$ pair production signal events is one of the most difficult ones, yielding to the ``worst'' and…
▽ More
One of the most interesting channels to search for SUSY is the direct pair-production of the $τ$-lepton superpartner, $\widetildeτ$. The $\widetildeτ$ is with high probability the lightest of the scalar leptons, so one of the first SUSY particles that can be observerd, and the signature of $\widetildeτ$ pair production signal events is one of the most difficult ones, yielding to the ``worst'' and so most global scenario for the searches. Analysis performed at LEP set the current model-independent $\widetildeτ$ limits, suffering from the low energy of this facility. Only under strong model assumptions, these limits are extended to higher masses by LHC studies. In this contribution we show the capability of the ILC, a future electron-positron collider with energy up to 1 TeV, for determining $\widetildeτ$ exclusion/discovery limits in a model-independent way, including an overview of the current state-of-the-art. The determination of the ``worst'' scenario for $\widetildeτ$ exclusion/discovery, taking into account the effect of the $\widetildeτ$ mixing on $\widetildeτ$ production cross-section and efficiency, is also presented. For selected benchmarks, the prospect for measuring masses and polarised cross-sections will be shown. The studies were done studying events passed through the full detector simulation and reconstruction procedures of the International Large Detector (ILD) concept at the ILC. The simulation included all SM backgrounds, as well as the machine induced ones.
△ Less
Submitted 1 November, 2022; v1 submitted 26 October, 2022;
originally announced October 2022.
-
Stable ion-tunable antiambipolarity in mixed ion-electron conducting polymers enables biorealistic artificial neurons
Authors:
Padinhare Cholakkal Harikesh,
Chi-Yuan Yang,
Han-Yan Wu,
Silan Zhang,
Jun-Da Huang,
Magnus Berggren,
Deyu Tu,
Simone Fabiano
Abstract:
Bio-integrated neuromorphic systems promise for new protocols to record and regulate the signaling of biological systems. Making such artificial neural circuits successful requires minimal circuit complexity and ion-based operating mechanisms similar to that of biology. However, simple leaky integrate-and-fire model neurons, commonly realized in either silicon or organic semiconductor neuromorphic…
▽ More
Bio-integrated neuromorphic systems promise for new protocols to record and regulate the signaling of biological systems. Making such artificial neural circuits successful requires minimal circuit complexity and ion-based operating mechanisms similar to that of biology. However, simple leaky integrate-and-fire model neurons, commonly realized in either silicon or organic semiconductor neuromorphic systems, can emulate only a few neural features. More functional neuron models, based on traditional complex Si-based complementary-metal-oxide-semiconductor (CMOS) or negative differential resistance (NDR) device circuits, are complicated to fabricate, not biocompatible, and lack ion- and chemical-based modulation features. Here we report a biorealistic conductance-based organic electrochemical neuron (c-OECN) using a mixed ion-electron conducting ladder-type polymer with reliable ion-tunable antiambipolarity. The latter is used to emulate the activation/inactivation of Na channels and delayed activation of K channels of biological neurons. These c-OECNs can then spike at bioplausible frequencies nearing 100 Hz, emulate most critical biological neural features, demonstrate stochastic spiking, and enable neurotransmitter and Ca2+-based spiking modulation. These combined features are impossible to achieve using previous technologies.
△ Less
Submitted 19 October, 2022;
originally announced October 2022.
-
Shape calculus for fitted and unfitted discretizations: domain transformations vs. boundary-face dilations
Authors:
Martin Berggren
Abstract:
Shape calculus concerns the calculation of directional derivatives of some quantity of interest, typically expressed as an integral. This article introduces a type of shape calculus based on localized dilation of boundary faces through perturbations of a level-set function. The calculus is tailored for shape optimization problems where a partial differential equation is numerically solved using a…
▽ More
Shape calculus concerns the calculation of directional derivatives of some quantity of interest, typically expressed as an integral. This article introduces a type of shape calculus based on localized dilation of boundary faces through perturbations of a level-set function. The calculus is tailored for shape optimization problems where a partial differential equation is numerically solved using a fictitious-domain method. That is, the boundary of a domain is allowed to cut arbitrarily through a computational mesh, which is held fixed throughout the computations. Directional derivatives of a volume or surface integral using the new shape calculus yields purely boundary-supported expressions, and the involved integrands are only required to be element-wise smooth. However, due to this low regularity, only one-sided differentiability can be guaranteed in general. The dilation concept introduced here differs from the standard approach to shape calculus, which is based on domain transformations. The use of domain transformations is closely linked the the use of traditional body-fitted discretization approaches, where the computational mesh is deformed to conform to the changing domain shape. The directional derivatives coming out of a shape calculus using deforming meshes under domain transformations are different then the ones from the boundary-dilation approach using fixed meshes; the former are not purely boundary supported but contain information also from the interior.
△ Less
Submitted 25 May, 2023; v1 submitted 19 October, 2022;
originally announced October 2022.
-
Fully 3D-Printed Organic Electrochemical Transistors
Authors:
Matteo Massetti,
Silan Zhang,
Harikesh Padinare,
Bernhard Burtscher,
Chiara Diacci,
Daniel T. Simon,
Xianjie Liu,
Mats Fahlman,
Deyu Tu,
Magnus Berggren,
Simone Fabiano
Abstract:
Organic electrochemical transistors (OECTs) are currently being investigated for various applications, ranging from sensors to logics and neuromorphic hardware. The fabrication process must be compatible with flexible and scalable digital techniques to address this wide spectrum of applications. Here, we report a direct-write additive process to fabricate fully 3D printed OECTs. We developed 3D pr…
▽ More
Organic electrochemical transistors (OECTs) are currently being investigated for various applications, ranging from sensors to logics and neuromorphic hardware. The fabrication process must be compatible with flexible and scalable digital techniques to address this wide spectrum of applications. Here, we report a direct-write additive process to fabricate fully 3D printed OECTs. We developed 3D printable conducting, semiconducting, insulating, and electrolyte inks to achieve this. The 3D-printed OECTs, operating in the depletion mode, can be fabricated on thin and flexible substrates, yielding high mechanical and environmental stability. We also developed a 3D printable nanocellulose formulation for the OECT substrate, demonstrating one of the first examples of fully 3D printed electronic devices. Good dopamine biosensing capabilities (limit of detection down to 6 uM without metal gate electrodes) and long-term (~1 hour) synapses response underscore that the present OECT manufacturing strategy is suitable for diverse applications requiring rapid design change and digitally enabled direct-write techniques.
△ Less
Submitted 14 September, 2022;
originally announced September 2022.
-
Report of the Topical Group on Physics Beyond the Standard Model at Energy Frontier for Snowmass 2021
Authors:
Tulika Bose,
Antonio Boveia,
Caterina Doglioni,
Simone Pagan Griso,
James Hirschauer,
Elliot Lipeles,
Zhen Liu,
Nausheen R. Shah,
Lian-Tao Wang,
Kaustubh Agashe,
Juliette Alimena,
Sebastian Baum,
Mohamed Berkat,
Kevin Black,
Gwen Gardner,
Tony Gherghetta,
Josh Greaves,
Maxx Haehn,
Phil C. Harris,
Robert Harris,
Julie Hogan,
Suneth Jayawardana,
Abraham Kahn,
Jan Kalinowski,
Simon Knapen
, et al. (297 additional authors not shown)
Abstract:
This is the Snowmass2021 Energy Frontier (EF) Beyond the Standard Model (BSM) report. It combines the EF topical group reports of EF08 (Model-specific explorations), EF09 (More general explorations), and EF10 (Dark Matter at Colliders). The report includes a general introduction to BSM motivations and the comparative prospects for proposed future experiments for a broad range of potential BSM mode…
▽ More
This is the Snowmass2021 Energy Frontier (EF) Beyond the Standard Model (BSM) report. It combines the EF topical group reports of EF08 (Model-specific explorations), EF09 (More general explorations), and EF10 (Dark Matter at Colliders). The report includes a general introduction to BSM motivations and the comparative prospects for proposed future experiments for a broad range of potential BSM models and signatures, including compositeness, SUSY, leptoquarks, more general new bosons and fermions, long-lived particles, dark matter, charged-lepton flavor violation, and anomaly detection.
△ Less
Submitted 18 October, 2022; v1 submitted 26 September, 2022;
originally announced September 2022.
-
Investigations of an effective time-domain boundary condition for quiscent viscothermal acoustics
Authors:
Linus Hägg,
Martin Berggren
Abstract:
Accurate simulations of sound propagation in narrow geometries need to account for viscous and thermal losses. In this respect, effective boundary conditions that model viscothermal losses in frequency-domain acoustics have recently gained in popularity. Here, we investigate the time-domain analogue of one such boundary condition. We demonstrate that the thermal part of the boundary condition is d…
▽ More
Accurate simulations of sound propagation in narrow geometries need to account for viscous and thermal losses. In this respect, effective boundary conditions that model viscothermal losses in frequency-domain acoustics have recently gained in popularity. Here, we investigate the time-domain analogue of one such boundary condition. We demonstrate that the thermal part of the boundary condition is dissipative in time domain as expected, while the viscous part, unexpectedly, may lead to an infinite instability. A finite-difference-time-domain scheme is developed for simulations of sound propagation in a duct with only thermal losses, and the obtained transmission characteristics are found to be in excellent agreement with frequency-domain simulations.
△ Less
Submitted 7 July, 2022;
originally announced July 2022.
-
New physics searches with the ILD detector at the ILC
Authors:
Mikael Berggren
Abstract:
Although the LHC experiments have searched for and excluded many proposed new particles up to masses close to 1 TeV, there are many scenarios that are difficult to address at a hadron collider. This talk will review a number of these scenarios and present the expectations for searches at an electron-positron collider such as the International Linear Collider. The cases discussed include the light…
▽ More
Although the LHC experiments have searched for and excluded many proposed new particles up to masses close to 1 TeV, there are many scenarios that are difficult to address at a hadron collider. This talk will review a number of these scenarios and present the expectations for searches at an electron-positron collider such as the International Linear Collider. The cases discussed include the light Higgsino, the stau lepton in the coannihilation region relevant to dark matter, and heavy vector bosons coupling to the s-channel in e$^+$e$^-$ annihilation. The studies are based on the ILD concept at the ILC.
△ Less
Submitted 28 April, 2022;
originally announced April 2022.
-
Evaluating the ILC SUSY reach in the most challenging scenario: $\widetildeτ$ NLSP, low $ΔM$ , lowest cross-section
Authors:
M. T. Núñez Pardo de Vera,
M. Berggren,
J. List
Abstract:
Pair-production of the superpartner of the $τ$-lepton, the $\tildeτ$, is one of the most interesting channels to search for SUSY in: The $\tildeτ$ is likely to be the lightest scalar lepton, and the signature of $\tildeτ$ pair production is one of the experimentally most difficult ones, thereby constituting the "worst" possible scenario for SUSY searches. The current model-independent $\tildeτ$ li…
▽ More
Pair-production of the superpartner of the $τ$-lepton, the $\tildeτ$, is one of the most interesting channels to search for SUSY in: The $\tildeτ$ is likely to be the lightest scalar lepton, and the signature of $\tildeτ$ pair production is one of the experimentally most difficult ones, thereby constituting the "worst" possible scenario for SUSY searches. The current model-independent $\tildeτ$ limits comes from analyses performed at LEP but they suffer from the limited energy of this facility. Limits obtained at the LHC do extend to higher masses, but they are only valid under strong assumptions. The International Linear Collider, the ILC, is a future electron-positron collider, to operate initially at an energy of 250 GeV, then to be upgraded to 500 GeV, and possibly to 1 TeV at a later stage. ILC will be a powerful facility for SUSY searches. The capability of the ILC for determining exclusion/discovery limits for the $\tildeτ$ in a model-independent way is shown in this paper. A detailed study of the "worst" scenario for $\tildeτ$ exclusion/discovery, taking into account the effect of the $\tildeτ$ mixing on $\tildeτ$ production cross-section and detection efficiency, is presented. The study also includes an analysis of the effect of the overlay particles in the $\tildeτ$ searches. The conclusion is that both the exclusion and discovery reaches for this "worst" case would extend to only a few GeV below the kinematic limit at the ILC. Also scenarios with the $\tildeτ$ and the Lightest SUSY Particle (the LSP) quite close in mass can be discovered or excluded at most $\tildeτ$ masses. The studies were done using detailed detector simulation of the ILD concept at the ILC. For signal, the fast detector simulation SGV was used, while the full Geant4 based DDSim was used for the standard model backgrounds.
△ Less
Submitted 12 October, 2022; v1 submitted 29 March, 2022;
originally announced March 2022.
-
The International Linear Collider: Report to Snowmass 2021
Authors:
Alexander Aryshev,
Ties Behnke,
Mikael Berggren,
James Brau,
Nathaniel Craig,
Ayres Freitas,
Frank Gaede,
Spencer Gessner,
Stefania Gori,
Christophe Grojean,
Sven Heinemeyer,
Daniel Jeans,
Katja Kruger,
Benno List,
Jenny List,
Zhen Liu,
Shinichiro Michizono,
David W. Miller,
Ian Moult,
Hitoshi Murayama,
Tatsuya Nakada,
Emilio Nanni,
Mihoko Nojiri,
Hasan Padamsee,
Maxim Perelstein
, et al. (487 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This docu…
▽ More
The International Linear Collider (ILC) is on the table now as a new global energy-frontier accelerator laboratory taking data in the 2030s. The ILC addresses key questions for our current understanding of particle physics. It is based on a proven accelerator technology. Its experiments will challenge the Standard Model of particle physics and will provide a new window to look beyond it. This document brings the story of the ILC up to date, emphasizing its strong physics motivation, its readiness for construction, and the opportunity it presents to the US and the global particle physics community.
△ Less
Submitted 16 January, 2023; v1 submitted 14 March, 2022;
originally announced March 2022.
-
New physics searches with the International Large Detector at the ILC
Authors:
Mikael Berggren
Abstract:
Although the LHC experiments have searched for and excluded many proposed new particles up to masses close to 1 TeV, there are many scenarios that are difficult to address at a hadron collider. This talk will review a number of these scenarios and present the expectations for searches at an electron-positron collider such as the International Linear Collider. The cases discussed include the light…
▽ More
Although the LHC experiments have searched for and excluded many proposed new particles up to masses close to 1 TeV, there are many scenarios that are difficult to address at a hadron collider. This talk will review a number of these scenarios and present the expectations for searches at an electron-positron collider such as the International Linear Collider. The cases discussed include the light Higgsino, the \stau~ slepton in the coannihilation region relevant to dark matter, as well as other BSM signatures. The studies are based on the ILD concept at the ILC.
△ Less
Submitted 18 November, 2021;
originally announced November 2021.
-
New physics searches with the International Large Detector at the ILC
Authors:
Mikael Berggren
Abstract:
Although the LHC experiments have searched for and excluded many proposed new particles up to masses close to 1 TeV, there are many scenarios that are difficult to address at a hadron collider. This talk will review a number of these scenarios and present the expectations for searches at an electron-positron collider such as the International Linear Collider. The cases discussed include the light…
▽ More
Although the LHC experiments have searched for and excluded many proposed new particles up to masses close to 1 TeV, there are many scenarios that are difficult to address at a hadron collider. This talk will review a number of these scenarios and present the expectations for searches at an electron-positron collider such as the International Linear Collider. The cases discussed include the light Higgsino, the \stau~ slepton in the coannihilation region relevant to dark matter, as well as other SUSY signatures. he studies are based on the ILD concept at the ILC.
△ Less
Submitted 3 November, 2021;
originally announced November 2021.
-
Low-power/high-gain flexible complementary circuits based on printed organic electrochemical transistors
Authors:
Chi-Yuan Yang,
Deyu Tu,
Tero-Petri Ruoko,
Jennifer Y. Gerasimov,
Han-Yan Wu,
P. C. Harikesh,
Renee Kroon,
Christian Müller,
Magnus Berggren,
Simone Fabiano
Abstract:
The ability to accurately extract low-amplitude voltage signals is crucial in several fields, ranging from single-use diagnostics and medical technology to robotics and the Internet of Things. The organic electrochemical transistor, which features large transconductance values at low operation voltages, is ideal for monitoring small signals. Its large transconductance translates small gate voltage…
▽ More
The ability to accurately extract low-amplitude voltage signals is crucial in several fields, ranging from single-use diagnostics and medical technology to robotics and the Internet of Things. The organic electrochemical transistor, which features large transconductance values at low operation voltages, is ideal for monitoring small signals. Its large transconductance translates small gate voltage variations into significant changes in the drain current. However, a current-to-voltage conversion is further needed to allow proper data acquisition and signal processing. Low power consumption, high amplification, and manufacturability on flexible and low-cost carriers are also crucial and highly anticipated for targeted applications. Here, we report low-power and high-gain flexible circuits based on printed complementary organic electrochemical transistors (OECTs). We leverage the low threshold voltage of both p-type and n-type enhancement-mode OECTs to develop complementary voltage amplifiers that can sense voltages as low as 100 $μ$V, with gains of 30.4 dB and at a power consumption < 2.7 $μ$W (single-stage amplifier). At the optimal operating conditions, the voltage gain normalized to power consumption reaches 169 dB/$μ$W, which is > 50 times larger than state-of-the-art OECT-based amplifiers. In a two-stage configuration, the complementary voltage amplifiers reach a DC voltage gain of 193 V/V, which is the highest among emerging CMOS-like technologies operating at supply voltages below 1 volt. Our findings demonstrate that flexible complementary circuits based on printed OECTs define a power-efficient platform for sensing and amplifying low-amplitude voltage signals in several emerging beyond-silicon applications.
△ Less
Submitted 14 June, 2021;
originally announced June 2021.
-
$\widetildeτ$ searches at the ILC
Authors:
M. T. Núñez Pardo de Vera,
M. Berggren,
J. List
Abstract:
The direct pair-production of the superpartner of the $τ$-lepton, the $\widetildeτ$, is one of the most interesting channels to search for SUSY in. First of all, the $\widetildeτ$ is likely to be the lightest of the scalar leptons. Secondly the signature of $\widetildeτ$ pair production signal events is one of the experimentally most difficult ones, thereby constituting the "worst" possible scenar…
▽ More
The direct pair-production of the superpartner of the $τ$-lepton, the $\widetildeτ$, is one of the most interesting channels to search for SUSY in. First of all, the $\widetildeτ$ is likely to be the lightest of the scalar leptons. Secondly the signature of $\widetildeτ$ pair production signal events is one of the experimentally most difficult ones, thereby constituting the "worst" possible scenario for SUSY searches. The current model-independent $\widetildeτ$ limits comes from analyses performed at LEP but they suffer from the limited energy of this facility. Limits obtained at the LHC do extend to higher masses, but they are only valid under strong assumptions. ILC, a future electron-positron collider with energy up to 500 GeV and upgrade capability\footnote{The initial ILC energy is planned to be 250 GeV.}, is a promising facility for SUSY searches. The capability of the ILC for determining exclusion/discovery limits for the $\widetildeτ$ in a model-independent way is shown in this paper, together with an overview of the current state-of-the-art. Results of the last studies of $\widetildeτ$ pair-production at the ILC are presented, showing the improvements with respect to previous results.
△ Less
Submitted 18 May, 2021;
originally announced May 2021.
-
Generating the full SM at linear colliders
Authors:
Mikael Berggren
Abstract:
Future linear $e^+e^-$ colliders aim for extremely high precision measurements. To achieve this, not only excellent detectors and well controlled machine conditions are needed, but also the best possible estimate of backgrounds. To avoid that lacking channels and too low statistics becomes a major source of systematic errors in data-MC comparisons, all SM channels with the potential to yield at le…
▽ More
Future linear $e^+e^-$ colliders aim for extremely high precision measurements. To achieve this, not only excellent detectors and well controlled machine conditions are needed, but also the best possible estimate of backgrounds. To avoid that lacking channels and too low statistics becomes a major source of systematic errors in data-MC comparisons, all SM channels with the potential to yield at least a few events under the full lifetime of the projects need to be generated, with statistics largely exceeding that of the real data. Also machine conditions need to be accurately taken into account. This includes beam-polarisation, interactions due to the photons inevitably present in the highly focused beams, and coherent interactions of whole bunches. This endeavour has already been partly achieved in preparing design documents for both the ILC and CLIC: Comprehensive samples of fully simulated and reconstructed events are available for use. In this contribution, we present how the generation of physics events at linear colliders is categorised and organised, and the tools used. Also covered is how different aspects of machine conditions, different sources of spurious interactions (such as beam-induced backgrounds) are treated and the tools involved for these aspects.
△ Less
Submitted 9 May, 2021;
originally announced May 2021.
-
Redox-tunable structural colour images based on UV-patterned conducting polymers
Authors:
Shangzhi Chen,
Stefano Rossi,
Ravi Shanker,
Giancarlo Cincotti,
Sampath Gamage,
Philipp Kuhne,
Vallery Stanishev,
Isak Engquist,
Magnus Berggren,
Jesper Edberg,
Vanya Darakchieva,
Magnus P. Jonsson
Abstract:
Precise manipulation of light-matter interaction has enabled a wide variety of approaches to create bright and vivid structural colours. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub…
▽ More
Precise manipulation of light-matter interaction has enabled a wide variety of approaches to create bright and vivid structural colours. Techniques utilizing photonic crystals, Fabry-Pérot cavities, plasmonics, or high-refractive index dielectric metasurfaces have been studied for applications ranging from optical coatings to reflective displays. However, complicated fabrication procedures for sub-wavelength nanostructures, limited active areas, and inherent absence of tunability with these approaches significantly impede their further developments towards flexible, large-scale, and switchable devices compatible with facile and cost-effective production. Herein, we present a way to generate structural colours based on conducting polymer thin films prepared on metallic surfaces via vapour phase polymerization and ultraviolet (UV) light patterning. Varying the UV dose leads to synergistic variation of film absorption and thickness, which generates controllable colours from violet to red. Together with greyscale photomasks this enables fabrication of high-resolution colour images using single exposure steps. We further demonstrate spatiotemporal tuning of the structurally coloured surfaces and images via electrochemical modulation of the polymer redox state. The simple structure, facile fabrication, wide colour gamut, and dynamic colour tuning make this concept competitive for future multi-functional and smart displays.
△ Less
Submitted 20 January, 2021;
originally announced January 2021.
-
Kinematic Edge Detection Using Finite Impulse Response Filters
Authors:
Mikael Berggren,
Stefano Caiazza,
Madalina Chera,
Jenny List
Abstract:
Various physics observables can be determined from the localisation of distinct edge-like features in distributions of measurement values. In this paper, we address the observation that neither differentiating nor fitting the measured distributions is robust against significant fluctuations in the experimental data. We propose the application of Finite Impulse Response (FIR) filters instead. To de…
▽ More
Various physics observables can be determined from the localisation of distinct edge-like features in distributions of measurement values. In this paper, we address the observation that neither differentiating nor fitting the measured distributions is robust against significant fluctuations in the experimental data. We propose the application of Finite Impulse Response (FIR) filters instead. To demonstrate the method, we consider the typical case in particle physics in which the precise localisation of kinematic edges, often blurred by e.g.\ background contributions and detector effects, is crucial for determining particle masses. We show that even for binned data, typical for high energy physics, the optimal FIR filter kernel can be approximated by the {\em first derivative of a Gaussian} (FDOG). We study two highly complementary supersymmetric scenarios that, if realised in nature, could be observed at a future high-energy $e^+e^-$ collider such as the International Linear Collider (ILC) or the Compact Linear Collider (CLIC). The first scenario considers the production of $\tilde{e}^{\pm}-$pairs while the second focuses on the $\tildeχ^{\pm}_{1}$ and $\tildeχ^{0}_{2}$-pair production. We demonstrate that the FIR filter method for edge extraction is superior to previously employed methods in terms of robustness and precision.
△ Less
Submitted 21 December, 2020;
originally announced December 2020.
-
Prospects of measuring the branching fraction of the Higgs boson decaying into muon pairs at the International Linear Collider
Authors:
Shin-ichi Kawada,
Jenny List,
Mikael Berggren
Abstract:
The prospects for measuring the branching fraction of $H \to μ^+ μ^-$ at the International Linear Collider (ILC) have been evaluated based on a full detector simulation of the International Large Detector (ILD) concept, considering centre-of-mass energies ($\sqrt{s}$) of 250 GeV and 500 GeV. For both $\sqrt{s}$ cases, the two final states $e^+ e^- \to q\overline{q}H$ and…
▽ More
The prospects for measuring the branching fraction of $H \to μ^+ μ^-$ at the International Linear Collider (ILC) have been evaluated based on a full detector simulation of the International Large Detector (ILD) concept, considering centre-of-mass energies ($\sqrt{s}$) of 250 GeV and 500 GeV. For both $\sqrt{s}$ cases, the two final states $e^+ e^- \to q\overline{q}H$ and $e^+ e^- \to ν\overlineνH$ have been analyzed. For integrated luminosities of 2 ab$^{-1}$ at $\sqrt{s} = 250$ GeV and 4 ab$^{-1}$ at $\sqrt{s} = 500$ GeV, the combined precision on the branching fraction of $H \to μ^+ μ^-$ is estimated to be 17{\%}. The impact of the transverse momentum resolution for this analysis is also studied.
△ Less
Submitted 9 September, 2020;
originally announced September 2020.
-
ILC Study Questions for Snowmass 2021
Authors:
Keisuke Fujii,
Christophe Grojean,
Michael E. Peskin,
Tim Barklow,
Yuanning Gao,
Shinya Kanemura,
Jenny List,
Mihoko Nojiri,
Maxim Perelstein,
Roman Poeschl,
Juergen Reuter,
Frank Simon,
Tomohiko Tanabe,
James D. Wells,
Mikael Berggren,
Esteban Fullana,
Juan Fuster,
Frank Gaede,
Stefania Gori,
Daniel Jeans,
Adrian Irles,
Sunghoon Jung,
Shin-Ichi Kawada,
Shigeki Matsumoto,
Chris Potter
, et al. (10 additional authors not shown)
Abstract:
To aid contributions to the Snowmass 2021 US Community Study on physics at the International Linear Collider and other proposed $e^+e^-$ colliders, we present a list of study questions that could be the basis of useful Snowmass projects. We accompany this with links to references and resources on $e^+e^-$ physics, and a description of a new software framework that we are preparing for $e^+e^-$ stu…
▽ More
To aid contributions to the Snowmass 2021 US Community Study on physics at the International Linear Collider and other proposed $e^+e^-$ colliders, we present a list of study questions that could be the basis of useful Snowmass projects. We accompany this with links to references and resources on $e^+e^-$ physics, and a description of a new software framework that we are preparing for $e^+e^-$ studies at Snowmass.
△ Less
Submitted 20 January, 2021; v1 submitted 7 July, 2020;
originally announced July 2020.
-
ILD Benchmark: Search for Extra Scalars Produced in Association with a $Z$ boson at $\sqrt{s}=500$ GeV
Authors:
Yan Wang,
Mikael Berggren,
Jenny List
Abstract:
We study the prospects for discovering an extra scalar boson $S^0$ at the International Linear Collider (ILC) based on a full simulation of the International Large Detector (ILD). In order to provide results in an as model-independent way as possible, the analysis uses the recoil of the scalar against a $Z$ boson decaying into a pair of muons, $e^+e^- \to μμS^{0}$. This process serves as a physics…
▽ More
We study the prospects for discovering an extra scalar boson $S^0$ at the International Linear Collider (ILC) based on a full simulation of the International Large Detector (ILD). In order to provide results in an as model-independent way as possible, the analysis uses the recoil of the scalar against a $Z$ boson decaying into a pair of muons, $e^+e^- \to μμS^{0}$. This process serves as a physics benchmark for the ILD detector performance at $\sqrt{s}=500$ GeV, specifically for the muon ID and momentum resolution, as well as for the identification of initial state radiation photons and their energy measurement. As final results, the sensitivities for discovering the extra scalars at 2 $σ$ level are evaluated in terms of a scale factor $\sin^2θ$ with respect to the Standard Model value of the cross section for the Higgs--strahlung process. Two detector models, IDR-L and IDR-S, are considered in the analysis, which differ in radius of the tracking volume, aspect ratio and strength of the magnetic field. While the two detector models show a visible difference in the precision of the reconstructed invariant di-muon mass, no difference is found at the level of the final results.
△ Less
Submitted 13 May, 2020;
originally announced May 2020.
-
Well-posed variational formulations of Friedrichs-type systems
Authors:
Martin Berggren,
Linus Hägg
Abstract:
All finite element methods, as well as much of the Hilbert-space theory for partial differential equations, rely on variational formulations, that is, problems of the type: find $u\in V$ such that $a(v,u) = l(v)$ for each $v\in L$, where $V, L$ are Sobolev spaces. However, for systems of Friedrichs type, there is a sharp disparity between established well-posedness theories, which are not variatio…
▽ More
All finite element methods, as well as much of the Hilbert-space theory for partial differential equations, rely on variational formulations, that is, problems of the type: find $u\in V$ such that $a(v,u) = l(v)$ for each $v\in L$, where $V, L$ are Sobolev spaces. However, for systems of Friedrichs type, there is a sharp disparity between established well-posedness theories, which are not variational, and the very successful discontinuous Galerkin methods that have been developed for such systems, which are variational. In an attempt to override this dichotomy, we present, through three specific examples of increasing complexity, well-posed variational formulations of boundary and initial--boundary-value problems of Friedrichs type. The variational forms we introduce are generalizations of those used for discontinuous Galerkin methods, in the sense that inhomogeneous boundary and initial conditions are enforced weakly through integrals in the variational forms. In the variational forms we introduce, the solution space is defined as a subspace $V$ of the graph space associated with the differential operator in question, whereas the test function space $L$ is a tuple of $L^2$ spaces that separately enforce the equation, boundary conditions of characteristic type, and initial conditions.
△ Less
Submitted 3 May, 2021; v1 submitted 27 April, 2020;
originally announced April 2020.
-
What pp SUSY limits mean for future e$^+$e$^-$ colliders
Authors:
Mikael Berggren
Abstract:
It is well-known that e$^+$e$^-$ colliders have the power to with certainty exclude or discover any SUSY model that predicts a Next to lightest SUSY particle (an NLSP) that has a mass up to slightly below the half the centre-of-mass energy of the collider. Here, we present an estimation of the power of present and future hadron colliders to extend the reach of searches for SUSY, with particular em…
▽ More
It is well-known that e$^+$e$^-$ colliders have the power to with certainty exclude or discover any SUSY model that predicts a Next to lightest SUSY particle (an NLSP) that has a mass up to slightly below the half the centre-of-mass energy of the collider. Here, we present an estimation of the power of present and future hadron colliders to extend the reach of searches for SUSY, with particular emphasis whether it can be claimed that either discovery or exclusion is {\it guaranteed} in a region of LSP and NLSP masses - no set of values of the other SUSY could change the conclusion. A scan over SUSY parameter space was done, only requiring that the NLSP was a bosino - the hardest case - with mass not larger than a few TeV. The mass-spectrum, cross-sections and decay branching ratios found in this region were confronted with projections of sensitivity at future hadron colliders. In our conclusions we weigh in the maturity of the analysis the projections are based upon. The conclusion is that although future hadron colliders have a large discovery-reach, i.e. potential to discover {\it some} SUSY model, hardly any models with low-to-medium LSP-NLSP mass-differences can be excluded with certainty. The models that are expected to be excluded/discovered are, on one hand, those with mass-differences larger than those allowed by models with GUT-scale $M_1$-$M_2$ unification, and on the other hand, a tiny region where the mass-difference is so small that the NLSP decays in the tracking volume of the detectors. Excluding the latter possibility does not, however, allow to exclude the possibility of a Wino or Higgsino LSP: at any value of the LSP mass, we could identify models where the NLSP lifetime would be too short for a signal to be seen.
△ Less
Submitted 27 March, 2020;
originally announced March 2020.
-
Chargino production at the ILC
Authors:
María Teresa Núñez Pardo de Vera,
Mikael Berggren,
Jenny List
Abstract:
The lighter chargino, $\widetildeχ_1^{\pm}$, is a prime candidate to be the next-to-lightest SUSY particle (the NLSP). Several analyses of $\widetildeχ_1^{\pm}$ pair-production at the ILC, at specific model-points, have been performed, showing that detection and property-determination is possible, even for very difficult cases. However, no recent studies have evaluated the reach of the ILC to dete…
▽ More
The lighter chargino, $\widetildeχ_1^{\pm}$, is a prime candidate to be the next-to-lightest SUSY particle (the NLSP). Several analyses of $\widetildeχ_1^{\pm}$ pair-production at the ILC, at specific model-points, have been performed, showing that detection and property-determination is possible, even for very difficult cases. However, no recent studies have evaluated the reach of the ILC to detect $\widetildeχ_1^{\pm}$ pair production in general. In this study, cross sections for $\widetildeχ_1^{\pm}$ pair production at the ILC were evaluated within a wide range of parameters. The aim was to determine the conditions for the lowest cross sections and compare these worst-case values with an estimation of the cross section limit for the observation of the lightest charginos at the ILC. The estimated limits were extrapolated from the studies performed at LEP, which can also be regarded as a worst-case scenario, since the tremendous advances in detector and accelerator technologies are disregarded
△ Less
Submitted 4 February, 2020;
originally announced February 2020.
-
WIMP Dark Matter at the International Linear Collider
Authors:
Moritz Habermehl,
Mikael Berggren,
Jenny List
Abstract:
In this study, the sensitivity of future lepton colliders to WIMP dark matter is evaluated assuming WIMP pair production accompanied by a photon from initial state radiation, through which the process can be identified. A full detector simulation for the International Large Detector (ILD) concept at the International Linear Collider (ILC) is performed for a \com energy of 500\,GeV. Energy scales o…
▽ More
In this study, the sensitivity of future lepton colliders to WIMP dark matter is evaluated assuming WIMP pair production accompanied by a photon from initial state radiation, through which the process can be identified. A full detector simulation for the International Large Detector (ILD) concept at the International Linear Collider (ILC) is performed for a \com energy of 500\,GeV. Energy scales of up to $3$\,TeV can be tested for different effective operators for WIMP masses almost up to half the \com energy. The sensitivity benefits from the polarised beams, which can reduce the main SM background from neutrino pair production substantially. In addition, systematic uncertainties are shown to be significantly reduced by combining data with several different polarisation configurations. In comparison to a previous study, the reconstruction of the forward detectors has been improved and the systematic uncertainties are fully treated. The results are also extrapolated to other \com energies, luminosities and beam polarisations. This allows to provide results for the full ILC programme, i.e.\ from 250\,GeV to 1\,TeV, as well as to give approximate results for other planned lepton colliders.
△ Less
Submitted 9 January, 2020;
originally announced January 2020.
-
The ILC as a natural SUSY discovery machine and precision microscope: from light higgsinos to tests of unification
Authors:
Howard Baer,
Mikael Berggren,
Keisuke Fujii,
Jenny List,
Suvi-Leena Lehtinen,
Tomohiko Tanabe,
Jacqueline Yan
Abstract:
The requirement of electroweak naturalness in simple supersymmetric models implies the existence of a cluster of four light higgsinos with mass $\sim 100-300$\,GeV, the lighter the better. While such light compressed spectra may be challenging to observe at LHC, the International Linear $e^+e^-$ Collider (ILC) with $\sqrt{s}>2m_{\rm higgsino}$ would serve as both a SUSY discovery machine and a pre…
▽ More
The requirement of electroweak naturalness in simple supersymmetric models implies the existence of a cluster of four light higgsinos with mass $\sim 100-300$\,GeV, the lighter the better. While such light compressed spectra may be challenging to observe at LHC, the International Linear $e^+e^-$ Collider (ILC) with $\sqrt{s}>2m_{\rm higgsino}$ would serve as both a SUSY discovery machine and a precision microscope. We study higgsino pair production signatures at the ILC based on full, \texttt{Geant4-}based simulation of the ILD detector concept. We examine several benchmark scenarios that may be challenging for discovery at HL-LHC due to mass differences between the higgsino states between $20$ and $4$\,GeV. Assuming $\sqrt{s}= 500$\,GeV and 1000\,fb$^{-1}$ of integrated luminosity, the individual higgsino masses can be measured to $1-2\%$ precision in case of the larger mass differences, and at the level of $5\%$ for the smallest mass difference case. The higgsino mass splittings are sensitive to the electroweak gaugino masses and allow extraction of gaugino masses to $\sim 3-20\%$ (depending on the model). Extrapolation of gaugino masses via renormalization group running can test the hypothesis of gaugino mass unification. We also examine a case with natural generalized mirage mediation where the unification of gaugino masses at an intermediate scale apparently gives rise to a natural SUSY spectrum somewhat beyond the reach of HL-LHC.
△ Less
Submitted 13 December, 2019;
originally announced December 2019.
-
On the well-posedness of Galbrun's equation
Authors:
Linus Hägg,
Martin Berggren
Abstract:
Galbrun's equation, which is a second order partial differential equation describing the evolution of a so-called Lagrangian displacement vector field, can be used to study acoustics in background flows as well as perturbations of astrophysical flows. Our starting point for deriving Galbrun's equation is linearized Euler's equations, which is a first order system of partial differential equations…
▽ More
Galbrun's equation, which is a second order partial differential equation describing the evolution of a so-called Lagrangian displacement vector field, can be used to study acoustics in background flows as well as perturbations of astrophysical flows. Our starting point for deriving Galbrun's equation is linearized Euler's equations, which is a first order system of partial differential equations that describe the evolution of the so-called Eulerian flow perturbations. Given a solution to linearized Euler's equations, we introduce the Lagrangian displacement as the solution to a linear first order partial differential equation, driven by the Eulerian perturbation of the fluid velocity. Our Lagrangian displacement solves Galbrun's equation, provided it is regular enough and that the so-called "no resonance" assumption holds. In the case that the background flow is steady and tangential to the domain boundary, we prove existence, uniqueness, and continuous dependence on data of solutions to an initial--boundary value problem for linearized Euler's equations. For such background flows, we demonstrate that the Lagrangian displacement is well-defined, that the initial datum of the Lagrangian displacement can be chosen in order to fulfill the "no resonance" assumption, and derive a classical energy estimate for (sufficiently regular solutions to) Galbrun's equation. Due to the presence of zeroth order terms of indefinite signs in the equations, the energy estimate allows solutions that grow exponentially with time.
△ Less
Submitted 3 February, 2020; v1 submitted 9 December, 2019;
originally announced December 2019.
-
The International Linear Collider: A Global Project
Authors:
Philip Bambade,
Tim Barklow,
Ties Behnke,
Mikael Berggren,
James Brau,
Philip Burrows,
Dmitri Denisov,
Angeles Faus-Golfe,
Brian Foster,
Keisuke Fujii,
Juan Fuster,
Frank Gaede,
Paul Grannis,
Christophe Grojean,
Andrew Hutton,
Benno List,
Jenny List,
Shinichiro Michizono,
Akiya Miyamoto,
Olivier Napoly,
Michael Peskin,
Roman Poeschl,
Frank Simon,
Jan Strube,
Jun** Tian
, et al. (7 additional authors not shown)
Abstract:
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We r…
▽ More
The International Linear Collider (ILC) is now under consideration as the next global project in particle physics. In this report, we review of all aspects of the ILC program: the physics motivation, the accelerator design, the run plan, the proposed detectors, the experimental measurements on the Higgs boson, the top quark, the couplings of the W and Z bosons, and searches for new particles. We review the important role that polarized beams play in the ILC program. The first stage of the ILC is planned to be a Higgs factory at 250 GeV in the centre of mass. Energy upgrades can naturally be implemented based on the concept of a linear collider. We discuss in detail the ILC program of Higgs boson measurements and the expected precision in the determination of Higgs couplings. We compare the ILC capabilities to those of the HL-LHC and to those of other proposed e+e- Higgs factories. We emphasize throughout that the readiness of the accelerator and the estimates of ILC performance are based on detailed simulations backed by extensive RandD and, for the accelerator technology, operational experience.
△ Less
Submitted 5 April, 2019; v1 submitted 4 March, 2019;
originally announced March 2019.
-
Search for Extra Scalars Produced in Association with Muon Pairs at the ILC
Authors:
Yan Wang,
Jenny List,
Mikael Berggren
Abstract:
We study the search for an extra scalar $S$ boson produced in association with the $Z$ boson at the International Linear Collider (ILC). The study is performed at center-of-mass energies of 250 GeV and 500 GeV based on the full simulation of the International Large Detector (ILD). In order to be as model-independent as possible, the analysis uses the recoil technique, in particular with the $Z$ bo…
▽ More
We study the search for an extra scalar $S$ boson produced in association with the $Z$ boson at the International Linear Collider (ILC). The study is performed at center-of-mass energies of 250 GeV and 500 GeV based on the full simulation of the International Large Detector (ILD). In order to be as model-independent as possible, the analysis uses the recoil technique, in particular with the $Z$ boson decaying into a pair of muons. As a result, exclusion cross-section limits are given in terms of a scale factor $k$ with respect to the Standard Model Higgs-strahlung process cross section. These predicted results, covering all possible searching regions of the extra scalars at the 250 GeV ILC and the 500 GeV ILC, can be interpreted independently of the decay modes of the $S$ boson.
△ Less
Submitted 16 February, 2019;
originally announced February 2019.
-
Prospects of measuring Higgs boson decays into muon pairs at the ILC
Authors:
Shin-ichi Kawada,
Jenny List,
Mikael Berggren
Abstract:
We study the prospects of measuring the decay of the Higgs boson into a pair of muons at the International Linear Collider (ILC). The study is performed at center-of-mass energies of 250\,GeV and 500\,GeV, with fully-simulated Monte-Carlo samples based on the International Large Detector (ILD). The expected precision on cross section times branching ratio $σ\times \mathrm{BR}(h \to μ^+ μ^-)$ has b…
▽ More
We study the prospects of measuring the decay of the Higgs boson into a pair of muons at the International Linear Collider (ILC). The study is performed at center-of-mass energies of 250\,GeV and 500\,GeV, with fully-simulated Monte-Carlo samples based on the International Large Detector (ILD). The expected precision on cross section times branching ratio $σ\times \mathrm{BR}(h \to μ^+ μ^-)$ has been evaluated to be 24.9{\%} for an integrated luminosity of 2\,ab$^{-1}$ at 250\,GeV. This result improves to 17.5{\%} in combination with 4\,ab$^{-1}$ of 500\,GeV data. We also quantify the impact of the transverse momentum resolution on this analysis, and found that it is very important reach the design goal of an asymptotic resolution of $σ_{1/P_t} = 2 \times 10^{-5}$\,GeV$^{-1}$.
△ Less
Submitted 13 February, 2019;
originally announced February 2019.
-
The International Linear Collider. A Global Project
Authors:
Hiroaki Aihara,
Jonathan Bagger,
Philip Bambade,
Barry Barish,
Ties Behnke,
Alain Bellerive,
Mikael Berggren,
James Brau,
Martin Breidenbach,
Ivanka Bozovic-Jelisavcic,
Philip Burrows,
Massimo Caccia,
Paul Colas,
Dmitri Denisov,
Gerald Eigen,
Lyn Evans,
Angeles Faus-Golfe,
Brian Foster,
Keisuke Fujii,
Juan Fuster,
Frank Gaede,
Jie Gao,
Paul Grannis,
Christophe Grojean,
Andrew Hutton
, et al. (37 additional authors not shown)
Abstract:
A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal…
▽ More
A large, world-wide community of physicists is working to realise an exceptional physics program of energy-frontier, electron-positron collisions with the International Linear Collider (ILC). This program will begin with a central focus on high-precision and model-independent measurements of the Higgs boson couplings. This method of searching for new physics beyond the Standard Model is orthogonal to and complements the LHC physics program. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. Polarised electron and positron beams add unique opportunities to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The key accelerator technology, superconducting radio-frequency cavities, has matured. Optimised collider and detector designs, and associated physics analyses, were presented in the ILC Technical Design Report, signed by 2400 scientists. There is a strong interest in Japan to host this international effort. A detailed review of the many aspects of the project is nearing a conclusion in Japan. Now the Japanese government is preparing for a decision on the next phase of international negotiations, that could lead to a project start within a few years. The potential timeline of the ILC project includes an initial phase of about 4 years to obtain international agreements, complete engineering design and prepare construction, and form the requisite international collaboration, followed by a construction phase of 9 years.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
The International Linear Collider. A European Perspective
Authors:
Philip Bambade,
Ties Behnke,
Mikael Berggren,
Ivanka Bozovic-Jelisavcic,
Philip Burrows,
Massimo Caccia,
Paul Colas,
Gerald Eigen,
Lyn Evans,
Angeles Faus-Golfe,
Brian Foster,
Juan Fuster,
Frank Gaede,
Christophe Grojean,
Marek Idzik,
Andrea Jeremie,
Tadeusz Lesiak,
Aharon Levy,
Benno List,
Jenny List,
Joachim Mnich,
Olivier Napoly,
Carlo Pagani,
Roman Poeschl,
Francois Richard
, et al. (9 additional authors not shown)
Abstract:
The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-prec…
▽ More
The International Linear Collider (ILC) being proposed in Japan is an electron-positron linear collider with an initial energy of 250 GeV. The ILC accelerator is based on the technology of superconducting radio-frequency cavities. This technology has reached a mature stage in the European XFEL project and is now widely used. The ILC will start by measuring the Higgs properties, providing high-precision and model-independent determinations of its parameters. The ILC at 250 GeV will also search for direct new physics in exotic Higgs decays and in pair-production of weakly interacting particles. The use of polarised electron and positron beams opens new capabilities and scenarios that add to the physics reach. The ILC can be upgraded to higher energy, enabling precision studies of the top quark and measurement of the top Yukawa coupling and the Higgs self-coupling. The international -- including European -- interest for the project is very strong. Europe has participated in the ILC project since its early conception and plays a major role in its present development covering most of its scientific and technological aspects: physics studies, accelerator and detectors. The potential for a wide participation of European groups and laboratories is thus high, including important opportunities for European industry. Following decades of technical development, R&D, and design optimisation, the project is ready for construction and the European particle physics community, technological centers and industry are prepared to participate in this challenging endeavour.
△ Less
Submitted 28 January, 2019;
originally announced January 2019.
-
Search for Light Scalars Produced in Association with Muon Pairs for $\sqrt{s}$ = 250 GeV at the ILC
Authors:
Yan Wang,
Jenny List,
Mikael Berggren
Abstract:
In many models with extended Higgs sectors, $e.g.$ 2HDM, NMSSM, there exists a light scalar $h$, lighter than the Standard Model (SM) like Higgs, and the coupling of $hZZ$ can be very small, as expected from the likeness of the 125 GeV Higgs boson measured at the LHC to the SM Higgs boson. Such a light scalar with suppressed couplings to the $Z$ boson would have escaped detection at LEP due to its…
▽ More
In many models with extended Higgs sectors, $e.g.$ 2HDM, NMSSM, there exists a light scalar $h$, lighter than the Standard Model (SM) like Higgs, and the coupling of $hZZ$ can be very small, as expected from the likeness of the 125 GeV Higgs boson measured at the LHC to the SM Higgs boson. Such a light scalar with suppressed couplings to the $Z$ boson would have escaped detection at LEP due to its limited luminosity. With a factor of 1000 higher luminosity and polarized beams, the International Linear Collider (ILC) is expected to have substantial discovery potential for such states. Furthermore, searches for additional scalars at LEP and LHC are usually dependent on the model details, such as decay channels. Thus, it is necessary to have a more general analysis with model-independent assumptions.
In this work, we perform a search for a light higgs boson produced in association with $Z$ boson at the ILC with a center-of-mass energy of 250 GeV, using the full Geant4-based simulation of the ILD detector concept. In order to be as model-independent as possible, the analysis is performed using the recoil technique, in particular with the $Z$ boson decaying into a pair of muons. As a preliminary result, the ILC's exclusion limits will be shown for different higgs masses between 30 and 115 GeV.
△ Less
Submitted 24 January, 2018;
originally announced January 2018.
-
Branching ratio measurement of $h \to μ^+ μ^-$ at the ILC
Authors:
Shin-ichi Kawada,
Jenny List,
Mikael Berggren
Abstract:
We study the prospects of measurement of the branching ratio of $h \to μ^+ μ^-$ at the International Linear Collider (ILC). The study is performed at center-of-mass energies of 250 GeV and 500 GeV, using fully-simulated MC samples with the International Large Detector (ILD) model. For both center-of-mass energies, the two final states $q\overline{q}h$ and $ν\overlineνh$ have been analyzed. For an…
▽ More
We study the prospects of measurement of the branching ratio of $h \to μ^+ μ^-$ at the International Linear Collider (ILC). The study is performed at center-of-mass energies of 250 GeV and 500 GeV, using fully-simulated MC samples with the International Large Detector (ILD) model. For both center-of-mass energies, the two final states $q\overline{q}h$ and $ν\overlineνh$ have been analyzed. For an integrated luminosity of 2000 fb$^{-1}$ at 250 GeV and 4000 fb$^{-1}$ at 500 GeV, corresponding to the H20 running scenario as well as its staged version, the precision on $σ\times \mathrm{BR}(h \to μ^+ μ^-)$ is estimated.
△ Less
Submitted 25 January, 2018; v1 submitted 24 January, 2018;
originally announced January 2018.
-
Acoustic boundary layers as boundary conditions
Authors:
Martin Berggren,
Anders Bernland,
Daniel Noreland
Abstract:
The linearized, compressible Navier-Stokes equations can be used to model acoustic wave propagation in the presence of viscous and thermal boundary layers. However, acoustic boundary layers are notorious for invoking prohibitively high resolution requirements on numerical solutions of the equations. We derive and present a strategy for how viscous and thermal boundary-layer effects can be represen…
▽ More
The linearized, compressible Navier-Stokes equations can be used to model acoustic wave propagation in the presence of viscous and thermal boundary layers. However, acoustic boundary layers are notorious for invoking prohibitively high resolution requirements on numerical solutions of the equations. We derive and present a strategy for how viscous and thermal boundary-layer effects can be represented as a boundary condition on the standard Helmholtz equation for the acoustic pressure. This boundary condition constitutes an $O(δ)$ perturbation, where $δ$ is the boundary-layer thickness, of the vanishing Neumann condition for the acoustic pressure associated with a lossless sound-hard wall. The approximate model is valid when the wavelength and the minimum radius of curvature of the wall is much larger than the boundary layer thickness. In the special case of sound propagation in a cylindrical duct, the model collapses to the classical Kirchhoff solution. We assess the model in the case of sound propagation through a compression driver, a kind of transducer that is commonly used to feed horn loudspeakers. Due to the presence of shallow chambers and thin slits in the device, it is crucial to include modeling of visco-thermal losses in the acoustic analysis. The transmitted power spectrum through the device calculated numerically using our model agrees well with computations using a hybrid model, where the full linearized, compressible Navier-Stokes equations are solved in the narrow regions of the device and the inviscid Helmholtz equations elsewhere. However, our model needs almost two orders of magnitude less memory and computational time than the more complete model.
△ Less
Submitted 4 June, 2018; v1 submitted 12 January, 2018;
originally announced January 2018.
-
The role of positron polarization for the inital $250$ GeV stage of the International Linear Collider
Authors:
Keisuke Fujii,
Christophe Grojean,
Michael E. Peskin,
Tim Barklow,
Yuanning Gao,
Shinya Kanemura,
Hyungdo Kim,
Jenny List,
Mihoko Nojiri,
Maxim Perelstein,
Roman Pöschl,
Jürgen Reuter,
Frank Simon,
Tomohiko Tanabe,
James D. Wells,
Jaehoon Yu,
Mikael Berggren,
Moritz Habermehl,
Robert Karl,
Gudrid Moortgat-Pick,
Sabine Riemann,
Jun** Tian,
Graham W. Wilson,
James Brau,
Hitoshi Murayama
Abstract:
The International Linear Collider is now proposed with a staged machine design, with the first stage at $\sqrt{s}=$~250 GeV and an integrated luminosity goal of 2~ab$^{-1}$. One of the questions for the machine design is the importance of positron polarization. In this report, we review the impact of positron polarization on the physics goals of the $250$ GeV stage of the ILC and demonstrate that…
▽ More
The International Linear Collider is now proposed with a staged machine design, with the first stage at $\sqrt{s}=$~250 GeV and an integrated luminosity goal of 2~ab$^{-1}$. One of the questions for the machine design is the importance of positron polarization. In this report, we review the impact of positron polarization on the physics goals of the $250$ GeV stage of the ILC and demonstrate that positron polarization has distinct advantages.
△ Less
Submitted 9 January, 2018;
originally announced January 2018.
-
Physics Case for the 250 GeV Stage of the International Linear Collider
Authors:
Keisuke Fujii,
Christophe Grojean,
Michael E. Peskin,
Tim Barklow,
Yuanning Gao,
Shinya Kanemura,
Hyungdo Kim,
Jenny List,
Mihoko Nojiri,
Maxim Perelstein,
Roman Poeschl,
Juergen Reuter,
Frank Simon,
Tomohiko Tanabe,
James D. Wells,
Jaehoon Yu,
Mikael Berggren,
Moritz Habermehl,
Sunghoon Jung,
Robert Karl,
Tomohisa Ogawa,
Jun** Tian,
James Brau,
Hitoshi Murayama
Abstract:
The International Linear Collider is now proposed with a staged machine design, with the first stage at 250 GeV with a luminosity goal of 2 ab-1. In this paper, we review the physics expectations for this machine. These include precision measurements of Higgs boson couplings, searches for exotic Higgs decays, other searches for particles that decay with zero or small visible energy, and measuremen…
▽ More
The International Linear Collider is now proposed with a staged machine design, with the first stage at 250 GeV with a luminosity goal of 2 ab-1. In this paper, we review the physics expectations for this machine. These include precision measurements of Higgs boson couplings, searches for exotic Higgs decays, other searches for particles that decay with zero or small visible energy, and measurements of e+e- annihilation to W+W- and 2-fermion states with improved sensitivity. A summary table gives projections for the achievable levels of precision based on the latest full simulation studies.
△ Less
Submitted 7 August, 2018; v1 submitted 20 October, 2017;
originally announced October 2017.
-
Naturalness and light Higgsinos: why ILC is the right machine for SUSY discovery
Authors:
Suvi-Leena Lehtinen,
Howard Baer,
Mikael Berggren,
Keisuke Fujii,
Jenny List,
Tomohiko Tanabe,
Jacqueline Yan
Abstract:
Radiatively-driven natural supersymmetry, a theoretically and experimentally well-motivated framework, centers around the predicted existence of four light, nearly mass-degenerate Higgsinos with mass $\sim 100-200$ GeV (not too far above $m_Z$). The small mass splittings amongst the higgsinos, typically 4-20 GeV, results in very little visible energy arising from decays of the heavier higgsinos. G…
▽ More
Radiatively-driven natural supersymmetry, a theoretically and experimentally well-motivated framework, centers around the predicted existence of four light, nearly mass-degenerate Higgsinos with mass $\sim 100-200$ GeV (not too far above $m_Z$). The small mass splittings amongst the higgsinos, typically 4-20 GeV, results in very little visible energy arising from decays of the heavier higgsinos. Given that other SUSY particles are considerably heavy, this makes detection challenging at hadron colliders. On the other hand, the clean environment of an electron-positron collider with $\sqrt{s}>2m_{higgsino}$ would enable a decisive search of these required higgsinos, and thus either the discovery or exclusion of natural SUSY. We present a detailed simulation study of precision measurements of higgsino masses and production cross sections at $\sqrt{s}$ = 500 GeV of the proposed International Linear Collider currently under consideration for construction in Japan. The study is based on a Geant4 simulation of the International Large Detector concept. We examine several benchmark points just beyond the HL-LHC reach, with four light higgsinos directly accessible by the ILC, and the mass differences between the lightest SUSY particle and the heavier states ranging from about 4 to 20 GeV. It can be shown that their masses and production cross sections can be precisely measured to approximately 1\% precision or better. These precise measurements allow for extracting the underlying weak scale SUSY parameters, giving predictions for the masses of heavier SUSY states. These provide motivation for future high-energy colliders. Additionally, dark matter properties may be derived. Evolution of the measured gaugino masses to high energies should allow testing the hypothesis of gaugino mass unification.
△ Less
Submitted 6 October, 2017;
originally announced October 2017.
-
The Potential of the ILC for Discovering New Particles
Authors:
Keisuke Fujii,
Christophe Grojean,
Michael E. Peskin,
Tim Barklow,
Yuanning Gao,
Shinya Kanemura,
Hyungdo Kim,
Jenny List,
Mihoko Nojiri,
Maxim Perelstein,
Roman Pöschl,
Jürgen Reuter,
Frank Simon,
Tomohiko Tanabe,
James D. Wells,
Jaehoon Yu,
Howard Baer,
Mikael Berggren,
Sven Heinemeyer,
Suvi-Leena Lehtinen,
Jun** Tian,
Graham Wilson,
Jacqueline Yan,
Hitoshi Murayama,
James Brau
Abstract:
This paper addresses the question of whether the International Linear Collider has the capability of discovering new particles that have not already been discovered at the CERN Large Hadron Collider. We summarize the various paths to discovery offered by the ILC, and discuss them in the context of three different scenarios: 1. LHC does not discover any new particles, 2. LHC discovers some new low…
▽ More
This paper addresses the question of whether the International Linear Collider has the capability of discovering new particles that have not already been discovered at the CERN Large Hadron Collider. We summarize the various paths to discovery offered by the ILC, and discuss them in the context of three different scenarios: 1. LHC does not discover any new particles, 2. LHC discovers some new low mass states and 3. LHC discovers new heavy particles. We will show that in each case, ILC plays a critical role in discovery of new phenomena and in pushing forward the frontiers of high-energy physics as well as our understanding of the universe in a manner which is highly complementary to that of LHC.
For the busy reader, a two-page executive summary is provided at the beginning of the document.
△ Less
Submitted 17 February, 2017;
originally announced February 2017.
-
Inferring the location of authors from words in their texts
Authors:
Max Berggren,
Jussi Karlgren,
Robert Östling,
Mikael Parkvall
Abstract:
For the purposes of computational dialectology or other geographically bound text analysis tasks, texts must be annotated with their or their authors' location. Many texts are locatable through explicit labels but most have no explicit annotation of place. This paper describes a series of experiments to determine how positionally annotated microblog posts can be used to learn location-indicating w…
▽ More
For the purposes of computational dialectology or other geographically bound text analysis tasks, texts must be annotated with their or their authors' location. Many texts are locatable through explicit labels but most have no explicit annotation of place. This paper describes a series of experiments to determine how positionally annotated microblog posts can be used to learn location-indicating words which then can be used to locate blog texts and their authors. A Gaussian distribution is used to model the locational qualities of words. We introduce the notion of placeness to describe how locational words are.
We find that modelling word distributions to account for several locations and thus several Gaussian distributions per word, defining a filter which picks out words with high placeness based on their local distributional context, and aggregating locational information in a centroid for each text gives the most useful results. The results are applied to data in the Swedish language.
△ Less
Submitted 20 December, 2016;
originally announced December 2016.
-
SUSY model and dark matter determination in the compressed-spectrum region at the ILC
Authors:
Mikael Berggren
Abstract:
It is an appealing possibility that the observed dark matter density in the universe can be fully explained by SUSY. The current experimental knowledge indicates that this possibility strongly favors a co-annihilation scenario. In such scenarios, the mass difference between the next-to-lightest SUSY particle (the NLSP) and the lightest one (the LSP) is quite small, which assures that the annihilat…
▽ More
It is an appealing possibility that the observed dark matter density in the universe can be fully explained by SUSY. The current experimental knowledge indicates that this possibility strongly favors a co-annihilation scenario. In such scenarios, the mass difference between the next-to-lightest SUSY particle (the NLSP) and the lightest one (the LSP) is quite small, which assures that the annihilation cross-section is sufficient not to predict a too large abundance of dark matter. However, the small mass difference also means that observing SUSY becomes hard at hadron colliders, where the observation hinges on the tell-tale signature of missing transverse energy: if the mass difference NLSP-to-LSP is small, only little energy is carried away by the invisible LSP. This is also true even if several other SUSY particles are within the kinematic reach, since these states would to a large extent decay via cascades ending with an NLSP to LSP decay. A lepton collider does not have this problem. The clean environment and known initial state at such machines assures that SUSY can be detected even if the mass difference is very small, provided the center-of-mass energy is sufficiently high. We present prospects for observation and precision characterization of SUSY with small mass differences at the ILC, based on detailed simulations of the ILD detector concept. The resulting possibility to predict the dark matter relic density is evaluated and compared to the precision obtained from the Planck mission. Taking a specific model as an example, we also discuss the synergies from combining ILC and HL-LHC results.
△ Less
Submitted 14 November, 2016;
originally announced November 2016.
-
Naturalness and light higgsinos: A powerful reason to build the ILC
Authors:
Howard Baer,
Mikael Berggren,
Keisuke Fujii,
Suvi-Leena Lehtinen,
Jenny List,
Tomohiko Tanabe,
Jacqueline Yan
Abstract:
A core prediction of natural Supersymmetry is the existence of four light higgsinos not too far above the mass of the $Z$ boson. The small mass splittings amongst the higgsinos -- typically 5-20\,GeV -- imply very little visible energy release from decays of heavier higgsinos. In particular, if other SUSY particles are quite heavy, as can be the case in SUSY with radiatively-driven naturalness, th…
▽ More
A core prediction of natural Supersymmetry is the existence of four light higgsinos not too far above the mass of the $Z$ boson. The small mass splittings amongst the higgsinos -- typically 5-20\,GeV -- imply very little visible energy release from decays of heavier higgsinos. In particular, if other SUSY particles are quite heavy, as can be the case in SUSY with radiatively-driven naturalness, the higgsinos are extremely hard to detect at hadron colliders. The clean environment of electron-positron colliders with $\sqrt{s} > 2m_{\mathrm{higgsino}}$, however, would allow for a decisive search for the required light higgsinos. Thus, $e^+e^-$ colliders should either discover or exclude natural SUSY. We present a detailed study of higgsino pair production at the proposed International Linear $e^+e^-$ Collider which is under consideration for construction in Japan. A variety of precision measurements should allow for extraction of underlying parameters and provide a window onto physics at the grand unified scale.
△ Less
Submitted 9 November, 2016;
originally announced November 2016.
-
Dark matter relic density from observations of supersymmetry at the ILC
Authors:
Suvi-Leena Lehtinen,
Mikael Berggren,
Jenny List
Abstract:
Supersymmetry can explain the observed dark matter relic density with a neutralino dark matter particle and a coannihilating, almost mass-degenerate sparticle. If this were the case in nature, a linear electron positron collider like the ILC could discover the two sparticles if their masses are in the kinematic reach of the collider. This contribution discusses which observations are necessary at…
▽ More
Supersymmetry can explain the observed dark matter relic density with a neutralino dark matter particle and a coannihilating, almost mass-degenerate sparticle. If this were the case in nature, a linear electron positron collider like the ILC could discover the two sparticles if their masses are in the kinematic reach of the collider. This contribution discusses which observations are necessary at the ILC for predicting the dark matter relic density correctly and for confirming that the observed lightest neutralino is the only kind of dark matter. We take the case of stau coannihilation as an example.
△ Less
Submitted 26 February, 2016;
originally announced February 2016.