Showing 1–50 of 119 results for author: Berggren, K K

Analysis and Applications of a Heralded Electron Source

Authors: Stewart A. Koppell, John W. Simonaitis, Maurice A. R. Krielaart, William P. Putnam, Karl K. Berggren, Phillip D. Keathley

Abstract: We analytically describe the noise properties of a heralded electron source made from a standard electron gun, a weak photonic coupler, a single photon counter, and an electron energy filter. We argue the traditional heralding figure of merit, the Klyshko efficiency, is an insufficient statistic for characterizing performance in dose-control and dose-limited applications. Instead, we describe the… ▽ More We analytically describe the noise properties of a heralded electron source made from a standard electron gun, a weak photonic coupler, a single photon counter, and an electron energy filter. We argue the traditional heralding figure of merit, the Klyshko efficiency, is an insufficient statistic for characterizing performance in dose-control and dose-limited applications. Instead, we describe the sub-Poissonian statistics of the source using the fractional reduction in variance and the fractional increase in Fisher Information. Using these figures of merit, we discuss the engineering requirements for efficient heralding and evaluate potential applications using simple models of electron lithography, bright-field scanning transmission electron microscopy (BFSTEM), and scanning electron microscopy (SEM). We find that the advantage in each of these applications is situational, but potentially significant: dynamic control of the trade-off between write speed and shot noise in electron lithography; an order of magnitude dose reduction in BFSTEM for thin samples (e.g. 2D materials); and a doubling of dose efficiency for wall-steepness estimation in SEM. △ Less

Submitted 26 June, 2024; originally announced June 2024.

A superconducting full-wave bridge rectifier

Authors: Matteo Castellani, Owen Medeiros, Alessandro Buzzi, Reed A. Foster, Marco Colangelo, Karl K. Berggren

Abstract: Superconducting thin-film electronics are attractive for their low power consumption, fast operating speeds, and ease of interface with cryogenic systems such as single-photon detector arrays, and quantum computing devices. However, the lack of a reliable superconducting two-terminal asymmetric device, analogous to a semiconducting diode, limits the development of power-handling circuits, fundamen… ▽ More Superconducting thin-film electronics are attractive for their low power consumption, fast operating speeds, and ease of interface with cryogenic systems such as single-photon detector arrays, and quantum computing devices. However, the lack of a reliable superconducting two-terminal asymmetric device, analogous to a semiconducting diode, limits the development of power-handling circuits, fundamental for scaling up these technologies. Existing efforts to date have been limited to single-diode proofs of principle and lacked integration of multiple controllable and reproducible devices to form complex circuits. Here, we demonstrate a robust superconducting diode with tunable polarity using the asymmetric Bean-Livingston surface barrier in niobium nitride micro-bridges, achieving a 43% rectification efficiency. We then realize and integrate several such diodes into a bridge rectifier circuit on a single microchip that performs continuous full-wave rectification up to 3 MHz and AC-to-DC conversion in burst mode at 50 MHz with an estimated peak power efficiency of 60%. △ Less

Submitted 27 June, 2024; v1 submitted 17 June, 2024; originally announced June 2024.

Improvements of readout signal integrity in mid-infrared superconducting nanowire single photon detectors

Authors: Sahil R. Patel, Marco Colangelo, Andrew D. Beyer, Gregor G. Taylor, Jason P. Allmaras, Emma E. Wollman, Matthew D. Shaw, Karl K. Berggren, Boris Korzh

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal as the critical currents become increasingly smaller. We overcome this trade-off with a new device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and getting close to saturation at 10.6 μm. This work provides a novel platform for pushing SNSPD sensitivity to longer wavelengths while improving the scalability of the readout electronics. △ Less

Submitted 28 January, 2024; originally announced January 2024.

Quantum Sensors for High Energy Physics

Authors: Aaron Chou, Kent Irwin, Reina H. Maruyama, Oliver K. Baker, Chelsea Bartram, Karl K. Berggren, Gustavo Cancelo, Daniel Carney, Clarence L. Chang, Hsiao-Mei Cho, Maurice Garcia-Sciveres, Peter W. Graham, Salman Habib, Roni Harnik, J. G. E. Harris, Scott A. Hertel, David B. Hume, Rakshya Khatiwada, Timothy L. Kovachy, Noah Kurinsky, Steve K. Lamoreaux, Konrad W. Lehnert, David R. Leibrandt, Dale Li, Ben Loer , et al. (17 additional authors not shown)

Abstract: Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Sta… ▽ More Strong motivation for investing in quantum sensing arises from the need to investigate phenomena that are very weakly coupled to the matter and fields well described by the Standard Model. These can be related to the problems of dark matter, dark sectors not necessarily related to dark matter (for example sterile neutrinos), dark energy and gravity, fundamental constants, and problems with the Standard Model itself including the Strong CP problem in QCD. Resulting experimental needs typically involve the measurement of very low energy impulses or low power periodic signals that are normally buried under large backgrounds. This report documents the findings of the 2023 Quantum Sensors for High Energy Physics workshop which identified enabling quantum information science technologies that could be utilized in future particle physics experiments, targeting high energy physics science goals. △ Less

Submitted 3 November, 2023; originally announced November 2023.

Comments: 63 pages, 8 figures, Quantum Sensors for HEP workshop report, April 26-28, 2023

Coherent control of a superconducting qubit using light

Authors: Hana K. Warner, Jeffrey Holzgrafe, Beatriz Yankelevich, David Barton, Stefano Poletto, C. J. Xin, Neil Sinclair, Di Zhu, Eyob Sete, Brandon Langley, Emma Batson, Marco Colangelo, Amirhassan Shams-Ansari, Graham Joe, Karl K. Berggren, Liang Jiang, Matthew Reagor, Marko Loncar

Abstract: Quantum science and technology promise the realization of a powerful computational resource that relies on a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states [1,2]. While superconducting microwave qubits (3-8 GHz) operating in cryogenic environments have emerged as promising candidates for quantum processor nodes du… ▽ More Quantum science and technology promise the realization of a powerful computational resource that relies on a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states [1,2]. While superconducting microwave qubits (3-8 GHz) operating in cryogenic environments have emerged as promising candidates for quantum processor nodes due to their strong Josephson nonlinearity and low loss [3], the information between spatially separated processor nodes will likely be carried at room temperature via telecommunication photons (200 THz) propagating in low loss optical fibers. Transduction of quantum information [4-10] between these disparate frequencies is therefore critical to leverage the advantages of each platform by interfacing quantum resources. Here, we demonstrate coherent optical control of a superconducting qubit. We achieve this by develo** a microwave-optical quantum transducer that operates with up to 1.18% conversion efficiency (1.16% cooperativity) and demonstrate optically-driven Rabi oscillations (2.27 MHz) in a superconducting qubit without impacting qubit coherence times (800 ns). Finally, we discuss outlooks towards using the transducer to network quantum processor nodes. △ Less

Submitted 30 October, 2023; v1 submitted 24 October, 2023; originally announced October 2023.

Single-photon detection using large-scale high-temperature MgB$_2$ sensors at 20 K

Authors: I. Charaev, E. K. Batson, S. Cherednichenko, K. Reidy, V. Drakinskiy, Y. Yu, S. Lara-Avila, J. D. Thomsen, M. Colangelo, F. Incalza, K. Ilin, A. Schilling, K. K. Berggren

Abstract: Ultra-fast single-photon detectors with high current density and operating temperature can benefit space and ground applications, including quantum optical communication systems, lightweight cryogenics for space crafts, and medical use. Here we demonstrate magnesium diboride (MgB$_2$) thin-film superconducting microwires capable of single-photon detection at 1.55 $μ$m optical wavelength. We used h… ▽ More Ultra-fast single-photon detectors with high current density and operating temperature can benefit space and ground applications, including quantum optical communication systems, lightweight cryogenics for space crafts, and medical use. Here we demonstrate magnesium diboride (MgB$_2$) thin-film superconducting microwires capable of single-photon detection at 1.55 $μ$m optical wavelength. We used helium ions to alter the properties of MgB$_2$, resulting in microwire-based detectors exhibiting single-photon sensitivity across a broad temperature range of up to 20 K, and detection efficiency saturation for 1 $μ$m wide microwires at 3.7 K. Linearity of detection rate vs incident power was preserved up to at least ~100 Mcps. Despite the large active area of up to 400$\times$400 $μ$m$^2$, the reset time was found to be as low as $\sim1$ ns. Our research provides new possibilities for breaking the operating temperature limit and maximum single-pixel count rate, expanding the detector area, and raises inquiries about the fundamental mechanisms of single-photon detection in high-critical-temperature superconductors. △ Less

Submitted 29 August, 2023; originally announced August 2023.

Lightwave Electronic Harmonic Frequency Mixing

Authors: Matthew Yeung, Lu-Ting Chou, Marco Turchetti, Shih-Hsuan Chia, Karl K. Berggren, Philip. D. Keathley

Abstract: Frequency mixers are fundamental building blocks in many electronic systems. They enable frequency conversion for signal detection and processing. While conventional electronic frequency mixers operate in the GHz or at best in the THz frequency range, a compact and scalable petahertz-scale electronic frequency mixer would enable practical field-resolved optical signal processing and readout withou… ▽ More Frequency mixers are fundamental building blocks in many electronic systems. They enable frequency conversion for signal detection and processing. While conventional electronic frequency mixers operate in the GHz or at best in the THz frequency range, a compact and scalable petahertz-scale electronic frequency mixer would enable practical field-resolved optical signal processing and readout without the need for nonlinear optical elements. We used nanoscale antenna structures to experimentally demonstrate electronic harmonic mixing beyond 0.350 PHz. Through this harmonic mixing process, we demonstrate time-domain sampling of optical field waveforms spanning more than one octave of bandwidth. The high nonlinearity of the devices enabled field-resolved detection of spectral content outside of that contained within the local oscillator, greatly extending the range of detectable frequencies compared to conventional heterodyning techniques. We anticipate these devices to provide compact, PHz-scale solid-state detection for integration with emerging technologies such as compact frequency combs, optical waveform synthesizers, and compact timing systems. Our work has important implications for various fields such as chemistry, physics, material science, and biology, where PHz signals exhibiting femtosecond-scale dynamics are of great interest for spectroscopic analysis or imaging. △ Less

Submitted 27 July, 2023; originally announced July 2023.

Nanocryotron ripple counter integrated with a superconducting nanowire single-photon detector for megapixel arrays

Authors: Matteo Castellani, Owen Medeiros, Reed A. Foster, Alessandro Buzzi, Marco Colangelo, Joshua C. Bienfang, Alessandro Restelli, Karl K. Berggren

Abstract: Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good ca… ▽ More Decreasing the number of cables that bring heat into the cryostat is a critical issue for all cryoelectronic devices. Especially, arrays of superconducting nanowire single-photon detectors (SNSPDs) could require more than $10^6$ readout lines. Performing signal processing operations at low temperatures could be a solution. Nanocryotrons, superconducting nanowire three-terminal devices, are good candidates for integrating sensing and electronics on the same technological platform as SNSPDs in photon-counting applications. In this work, we demonstrated that it is possible to read out, process, encode, and store the output of SNSPDs using exclusively superconducting nanowires. In particular, we present the design and development of a nanocryotron ripple counter that detects input voltage spikes and converts the number of pulses to an $N$-digit value. The counting base can be tuned from 2 to higher values, enabling higher maximum counts without enlarging the circuit. As a proof-of-principle, we first experimentally demonstrated the building block of the counter, an integer-$N$ frequency divider with $N$ ranging from 2 to 5. Then, we demonstrated photon-counting operations at 405 nm and 1550 nm by coupling an SNSPD with a 2-digit nanocryotron counter partially integrated on-chip. The 2-digit counter could operate in either base 2 or base 3 with a bit error rate lower than $2 \times 10^{-4}$ and a count rate of $10^7\,$s$^{-1}$. We simulated circuit architectures for integrated readout of the counter state, and we evaluated the capabilities of reading out an SNSPD megapixel array that would collect up to $10^{12}$ counts per second. The results of this work, combined with our recent publications on a nanocryotron shift register and logic gates, pave the way for the development of nanocryotron processors, from which multiple superconducting platforms may benefit. △ Less

Submitted 30 June, 2024; v1 submitted 23 April, 2023; originally announced April 2023.

Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared

Authors: Jamie S. Luskin, Ekkehart Schmidt, Boris Korzh, Andrew D. Beyer, Bruce Bumble, Jason P. Allmaras, Alexander B. Walter, Emma E. Wollman, Lautaro Narváez, Varun B. Verma, Sae Woo Nam, Ilya Charaev, Marco Colangelo, Karl K. Berggren, Cristián Peña, Maria Spiropulu, Maurice Garcia-Sciveres, Stephen Derenzo, Matthew D. Shaw

Abstract: Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experime… ▽ More Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond. △ Less

Submitted 19 March, 2023; originally announced March 2023.

A Superconducting Nanowire Binary Shift Register

Authors: Reed A. Foster, Matteo Castellani, Alessandro Buzzi, Owen Medeiros, Marco Colangelo, Karl K. Berggren

Abstract: We present a design for a superconducting nanowire binary shift register, which stores digital states in the form of circulating supercurrents in high-kinetic-inductance loops. Adjacent superconducting loops are connected with nanocryotrons, three terminal electrothermal switches, and fed with an alternating two-phase clock to synchronously transfer the digital state between the loops. A two-loop… ▽ More We present a design for a superconducting nanowire binary shift register, which stores digital states in the form of circulating supercurrents in high-kinetic-inductance loops. Adjacent superconducting loops are connected with nanocryotrons, three terminal electrothermal switches, and fed with an alternating two-phase clock to synchronously transfer the digital state between the loops. A two-loop serial-input shift register was fabricated with thin-film NbN and achieved a bit error rate less than $10^{-4}$, operating at a maximum clock frequency of $83\,\mathrm{MHz}$ and in an out-of-plane magnetic field up to $6\,\mathrm{mT}$. A shift register based on this technology offers an integrated solution for low-power readout of superconducting nanowire single photon detector arrays, and is capable of interfacing directly with room-temperature electronics and operating unshielded in high magnetic field environments. △ Less

Submitted 17 April, 2023; v1 submitted 9 February, 2023; originally announced February 2023.

Comments: The following article has been published in Applied Physics Letters issue 122. 10 pages, 3 figures

Journal ref: Appl. Phys. Lett. 122, 152601 (2023)

Reduced ITO for Transparent Superconducting Electronics

Authors: Emma Batson, Marco Colangelo, John Simonaitis, Eyosias Gebremeskel, Owen Medeiros, Mayuran Saravanapavanantham, Vladimir Bulovic, P. Donald Keathley, Karl K. Berggren

Abstract: Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material like niobium can absorb over half of any incident optical radiation. We propose instead using superconductors which are transparent to the wavelengths used elsewhe… ▽ More Absorption of light in superconducting electronics is a major limitation on the quality of circuit architectures that integrate optical components with superconducting components. A 10 nm thick film of a typical superconducting material like niobium can absorb over half of any incident optical radiation. We propose instead using superconductors which are transparent to the wavelengths used elsewhere in the system. In this paper we investigated reduced indium tin oxide (ITO) as a potential transparent superconductor for electronics. We fabricated and characterized superconducting wires of reduced indium tin oxide. We also showed that a $\SI{10}{nm}$ thick film of the material would only absorb about 1 - 20\% of light between 500 - 1700 nm. △ Less

Submitted 16 December, 2022; originally announced December 2022.

Comments: 11 pages + 10 pages appendix, 5 figures + 5 figures appendix, submitting to IOP SUST

A Nanocryotron Memory and Logic Family

Authors: Alessandro Buzzi, Matteo Castellani, Reed A. Foster, Owen Medeiros, Marco Colangelo, Karl K. Berggren

Abstract: The development of superconducting electronics based on nanocryotrons has been limited so far to few-device circuits, in part due to the lack of standard and robust logic cells. Here, we introduce and experimentally demonstrate designs for a set of nanocryotron-based building blocks that can be configured and combined to implement memory and logic functions. The devices were fabricated by patterni… ▽ More The development of superconducting electronics based on nanocryotrons has been limited so far to few-device circuits, in part due to the lack of standard and robust logic cells. Here, we introduce and experimentally demonstrate designs for a set of nanocryotron-based building blocks that can be configured and combined to implement memory and logic functions. The devices were fabricated by patterning a single superconducting layer of niobium nitride and measured in liquid helium on a wide range of operating points. The tests show $10^{-4}$ bit error rates with above $20\,\%$ margins up to $50\,$MHz and the possibility of operating under the effect of a perpendicular $36\,$mT magnetic field, with $30\,\%$ margins at $10\,$MHz. Additionally, we designed and measured an equivalent delay flip-flop made of two memory cells to show the possibility of combining multiple building blocks to make larger circuits. These blocks may constitute a solid foundation for the development of nanocryotron logic circuits and finite-state machines with potential applications in the integrated processing and control of superconducting nanowire single-photon detectors. △ Less

Submitted 15 December, 2022; originally announced December 2022.

Comments: Submitted for publication in the Applied Physics Letters special issue "Advances in Superconducting Logic", 8 pages, 5 figures

Single-photon detection using high-temperature superconductors

Authors: I. Charaev, D. A. Bandurin, A. T. Bollinger, I. Y. Phinney, I. Drozdov, M. Colangelo, B. A. Butters, T. Taniguchi, K. Watanabe, X. He, I. Božović, P. Jarillo-Herrero, K. K. Berggren

Abstract: The detection of individual quanta of light is important for quantum computation, fluorescence lifetime imaging, single-molecule detection, remote sensing, correlation spectroscopy, and more. Thanks to their broadband operation, high detection efficiency, exceptional signal-to-noise ratio, and fast recovery times, superconducting nanowire single-photon detectors (SNSPDs) have become a critical com… ▽ More The detection of individual quanta of light is important for quantum computation, fluorescence lifetime imaging, single-molecule detection, remote sensing, correlation spectroscopy, and more. Thanks to their broadband operation, high detection efficiency, exceptional signal-to-noise ratio, and fast recovery times, superconducting nanowire single-photon detectors (SNSPDs) have become a critical component in these applications. The operation of SNSPDs based on conventional superconductors, which have a low critical temperature ($T_c$), requires costly and bulky cryocoolers. This motivated exploration of other superconducting materials with higher $T_c$ that would enable single-photon detection at elevated temperatures, yet this task has proven exceedingly difficult. Here we show that with proper processing, high-$T_c$ cuprate superconductors can meet this challenge. We fabricated superconducting nanowires (SNWs) out of thin flakes of Bi$_2$Sr$_2$CaCu$_2$O$_{8+δ}$ and La$_{1.55}$Sr$_{0.45}$CuO$_4$/La$_2$CuO$_4$ (LSCO-LCO) bilayer films and demonstrated their single-photon response up to $25$ and $8$ K, respectively. The single-photon operation is revealed through the linear scaling of the photon count rate (PCR) on the radiation power. Both of our cuprate-based SNSPDs exhibited single-photon sensitivity at the technologically-important $1.5$ $μ$m telecommunications wavelength. Our work expands the family of superconducting materials for SNSPD technology, opens the prospects of raising the temperature ceiling, and raises important questions about the underlying mechanisms of single-photon detection by unconventional superconductors. △ Less

Submitted 11 August, 2022; originally announced August 2022.

Comments: 8 pages, 3 figures

Journal ref: Nature Nanotechnology 18, 343-349 (2023)

Free-electron-light interactions in nanophotonics

Authors: Charles Roques-Carmes, Steven E. Kooi, Yi Yang, Nicholas Rivera, Phillip D. Keathley, John D. Joannopoulos, Steven G. Johnson, Ido Kaminer, Karl K. Berggren, Marin Soljačić

Abstract: When im**ing on optical structures or passing in their vicinity, free electrons can spontaneously emit electromagnetic radiation, a phenomenon generally known as cathodoluminescence. Free-electron radiation comes in many guises: Cherenkov, transition, and Smith-Purcell radiation, but also electron scintillation, commonly referred to as incoherent cathodoluminescence. While those effects have bee… ▽ More When im**ing on optical structures or passing in their vicinity, free electrons can spontaneously emit electromagnetic radiation, a phenomenon generally known as cathodoluminescence. Free-electron radiation comes in many guises: Cherenkov, transition, and Smith-Purcell radiation, but also electron scintillation, commonly referred to as incoherent cathodoluminescence. While those effects have been at the heart of many fundamental discoveries and technological developments in high-energy physics in the past century, their recent demonstration in photonic and nanophotonic systems has attracted a lot of attention. Those developments arose from predictions that exploit nanophotonics for novel radiation regimes, now becoming accessible thanks to advances in nanofabrication. In general, the proper design of nanophotonic structures can enable sha**, control, and enhancement of free-electron radiation, for any of the above-mentioned effects. Free-electron radiation in nanophotonics opens the way to promising applications, such as widely-tunable integrated light sources from x-ray to THz frequencies, miniaturized particle accelerators, and highly sensitive high-energy particle detectors. Here, we review the emerging field of free-electron radiation in nanophotonics. We first present a general, unified framework to describe free-electron light-matter interaction in arbitrary nanophotonic systems. We then show how this framework sheds light on the physical underpinnings of many methods in the field used to control and enhance free-electron radiation. Namely, the framework points to the central role played by the photonic eigenmodes in controlling the output properties of free-electron radiation (e.g., frequency, directionality, and polarization). [... see full abstract in paper] △ Less

Submitted 17 August, 2022; v1 submitted 3 August, 2022; originally announced August 2022.

Comments: 34 pages; 9 figures

Reversible Tuning of Superconductivity in Ion-Gated NbN Ultrathin Films by Self-Encapsulation with a High-$κ$ Dielectric Layer

Authors: Erik Piatti, Marco Colangelo, Mattia Bartoli, Owen Medeiros, Renato S. Gonnelli, Karl K. Berggren, Dario Daghero

Abstract: Ionic gating is a powerful technique for tuning the physical properties of a material via electric field-induced charge do**, but is prone to introduce extrinsic disorder and undesired electrochemical modifications in the gated material beyond pure electrostatics. Conversely, reversible, volatile and electrostatic modulation is pivotal in the reliable design and operation of novel device concept… ▽ More Ionic gating is a powerful technique for tuning the physical properties of a material via electric field-induced charge do**, but is prone to introduce extrinsic disorder and undesired electrochemical modifications in the gated material beyond pure electrostatics. Conversely, reversible, volatile and electrostatic modulation is pivotal in the reliable design and operation of novel device concepts enabled by the ultrahigh induced charge densities attainable via ionic gating. Here we demonstrate a simple and effective method to achieve reversible and volatile gating of surface-sensitive ultrathin niobium nitride films via controlled oxidation of their surface. The resulting niobium oxide encapsulation layer exhibits a capacitance comparable to that of non-encapsulated ionic transistors, withstands gate voltages beyond the electrochemical stability window of the gate electrolyte, and enables a fully-reversible tunability of both the normal-state resistivity and the superconducting transition temperature of the encapsulated films. Our approach should be transferable to other materials and device geometries where more standard encapsulation techniques are not readily applicable. △ Less

Submitted 12 November, 2022; v1 submitted 11 May, 2022; originally announced May 2022.

Comments: Main text: 11 pages, 6 figures; Supplementary: 8 pages, 6 figures

Journal ref: Phys. Rev. Applied 18, 054023 (2022)

Axion Dark Matter

Authors: C. B. Adams, N. Aggarwal, A. Agrawal, R. Balafendiev, C. Bartram, M. Baryakhtar, H. Bekker, P. Belov, K. K. Berggren, A. Berlin, C. Boutan, D. Bowring, D. Budker, A. Caldwell, P. Carenza, G. Carosi, R. Cervantes, S. S. Chakrabarty, S. Chaudhuri, T. Y. Chen, S. Cheong, A. Chou, R. T. Co, J. Conrad, D. Croon , et al. (130 additional authors not shown)

Abstract: Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synerg… ▽ More Axions are well-motivated dark matter candidates with simple cosmological production mechanisms. They were originally introduced to solve the strong CP problem, but also arise in a wide range of extensions to the Standard Model. This Snowmass white paper summarizes axion phenomenology and outlines next-generation laboratory experiments proposed to detect axion dark matter. There are vibrant synergies with astrophysical searches and advances in instrumentation including quantum-enabled readout, high-Q resonators and cavities and large high-field magnets. This white paper outlines a clear roadmap to discovery, and shows that the US is well-positioned to be at the forefront of the search for axion dark matter in the coming decade. △ Less

Submitted 29 March, 2023; v1 submitted 28 March, 2022; originally announced March 2022.

Comments: restore and expand author list

Photon counting from the vacuum ultraviolet to the short wavelength infrared using semiconductor and superconducting technologies

Authors: Jonathan Asaadi, Dan Baxter, Karl K. Berggren, Davide Braga, Serge A. Charlebois, Clarence Chang, Angelo Dragone, Alex Drlica-Wagner, Carlos O. Escobar, Juan Estrada, Farah Fahim, Michael Febbraro, Guillermo Fernandez Moroni, Stephen Holland, Todd Hossbach, Stewart Koppell, Christopher Leitz, Agustina Magnoni, Benjamin A. Mazin, Jean-François Pratte, Bernie Rauscher, Dario Rodrigues, Lingjia Shen, Miguel Sofo-Haro, Javier Tiffenberg , et al. (5 additional authors not shown)

Abstract: In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in H… ▽ More In the last decade, several photon counting technologies have been developed opening a new window for experiments in the low photon number regime. Several ongoing and future projects in HEP benefit from these developments, which will also have a large impact outside HEP. During the next decade there is a clear technological opportunity to fully develop these sensors and produce a large impact in HEP. In this white paper we discuss the need for photon counting technologies in future projects, and present some technological opportunities to address those needs. △ Less

Submitted 23 March, 2022; originally announced March 2022.

Electron Emission Regimes of Planar Nano Vacuum Emitters

Authors: Marco Turchetti, Yujia Yang, Mina R. Bionta, Alberto Nardi, Luca Daniel, Karl K. Berggren, Phillip D. Keathley

Abstract: Recent advancements in nanofabrication have enabled the creation of vacuum electronic devices with nanoscale free space gaps. These nanoelectronic devices promise the benefits of cold-field emission and transport through free-space, such as high nonlinearity and relative insensitivity to temperature and ionizing radiation, all the while drastically reducing the footprint, increasing the operating… ▽ More Recent advancements in nanofabrication have enabled the creation of vacuum electronic devices with nanoscale free space gaps. These nanoelectronic devices promise the benefits of cold-field emission and transport through free-space, such as high nonlinearity and relative insensitivity to temperature and ionizing radiation, all the while drastically reducing the footprint, increasing the operating bandwidth and reducing the power consumption of each device. Furthermore, planarized vacuum nanoelectronics could easily be integrated at scale similar to typical micro and nanoscale semiconductor electronics. However, the interplay between different electron emission mechanisms from these devices are not well understood, and inconsistencies with pure Fowler-Nordheim emission have been noted by others. In this work, we systematically study the current-voltage characteristics of planar vacuum nano-diodes having few-nanometer radii of curvature and free-space gaps between the emitter and collector. By investigating the current-voltage characteristics of nearly identical diodes fabricated from two different materials and under various environmental conditions, such as temperature and atmospheric pressure, we were able to clearly isolate three distinct emission regimes within a single device: Schottky, Fowler-Nordheim, and saturation. Our work will enable robust and accurate modeling of vacuum nanoelectronics which will be critical for future applications requiring high-speed and low-power electronics capable of operation in extreme conditions. △ Less

Submitted 11 January, 2022; originally announced January 2022.

Improved heralded single-photon source with a photon-number-resolving superconducting nanowire detector

Authors: Samantha I. Davis, Andrew Mueller, Raju Valivarthi, Nikolai Lauk, Lautaro Narvaez, Boris Korzh, Andrew D. Beyer, Marco Colangelo, Karl K. Berggren, Matthew D. Shaw, Neil Sinclair, Maria Spiropulu

Abstract: Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an effici… ▽ More Deterministic generation of single photons is essential for many quantum information technologies. A bulk optical nonlinearity emitting a photon pair, where the measurement of one of the photons heralds the presence of the other, is commonly used with the caveat that the single-photon emission rate is constrained due to a trade-off between multiphoton events and pair emission rate. Using an efficient and low noise photon-number-resolving superconducting nanowire detector we herald, in real time, a single photon at telecommunication wavelength. We perform a second-order photon correlation $g^{2}(0)$ measurement of the signal mode conditioned on the measured photon number of the idler mode for various pump powers and demonstrate an improvement of a heralded single-photon source. We develop an analytical model using a phase-space formalism that encompasses all multiphoton effects and relevant imperfections, such as loss and multiple Schmidt modes. We perform a maximum-likelihood fit to test the agreement of the model to the data and extract the best-fit mean photon number $μ$ of the pair source for each pump power. A maximum reduction of $0.118 \pm 0.012$ in the photon $g^{2}(0)$ correlation function at $μ= 0.327 \pm 0.007$ is obtained, indicating a strong suppression of multiphoton emissions. For a fixed $g^{2}(0) = 7e-3$, we increase the single pair generation probability by 25%. Our experiment, built using fiber-coupled and off-the-shelf components, delineates a path to engineering ideal sources of single photons. △ Less

Submitted 8 January, 2023; v1 submitted 21 December, 2021; originally announced December 2021.

Comments: Model and analysis integrated into main text. Corrected equations. 17 pages, 11 figures

Journal ref: Physical Review Applied 18.6 (2022): 064007

A Superconducting Nanowire-based Architecture for Neuromorphic Computing

Authors: Andres E. Lombo, Jesus E. Lares, Matteo Castellani, Chi-Ning Chou, Nancy Lynch, Karl K. Berggren

Abstract: Neuromorphic computing is poised to further the success of software-based neural networks by utilizing improved customized hardware. However, the translation of neuromorphic algorithms to hardware specifications is a problem that has been seldom explored. Building superconducting neuromorphic systems requires extensive expertise in both superconducting physics and theoretical neuroscience. In this… ▽ More Neuromorphic computing is poised to further the success of software-based neural networks by utilizing improved customized hardware. However, the translation of neuromorphic algorithms to hardware specifications is a problem that has been seldom explored. Building superconducting neuromorphic systems requires extensive expertise in both superconducting physics and theoretical neuroscience. In this work, we aim to bridge this gap by presenting a tool and methodology to translate algorithmic parameters into circuit specifications. We first show the correspondence between theoretical neuroscience models and the dynamics of our circuit topologies. We then apply this tool to solve linear systems by implementing a spiking neural network with our superconducting nanowire-based hardware. △ Less

Submitted 2 August, 2022; v1 submitted 15 December, 2021; originally announced December 2021.

Comments: 29 pages, 10 figures

Broadband solenoidal haloscope for terahertz axion detection

Authors: Jesse Liu, Kristin Dona, Gabe Hoshino, Stefan Knirck, Noah Kurinsky, Matthew Malaker, David W. Miller, Andrew Sonnenschein, Mohamed H. Awida, Peter S. Barry, Karl K. Berggren, Daniel Bowring, Gianpaolo Carosi, Clarence Chang, Aaron Chou, Rakshya Khatiwada, Samantha Lewis, Juliang Li, Sae Woo Nam, Omid Noroozian, Tony X. Zhou

Abstract: We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry en… ▽ More We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry enables enclosure in standard cryostats and high-field solenoids, overcoming limitations of current dish antennas. A pilot 0.7 m$^{2}$ barrel experiment planned at Fermilab is projected to surpass existing dark photon coupling constraints by over a decade with one-day runtime. Axion sensitivity requires $<10^{-20}$ W/$\sqrt{\textrm{Hz}}$ sensor noise equivalent power with a 10 T solenoid and 10 m$^{2}$ barrel. We project BREAD sensitivity for various sensor technologies and discuss future prospects. △ Less

Submitted 24 March, 2022; v1 submitted 23 November, 2021; originally announced November 2021.

Comments: 5 pages, 2 figures + references and appendices, v2 matches journal version

Journal ref: Phys. Rev. Lett. 128 (2022) 131801

Secondary Electron Count Imaging in SEM

Authors: Akshay Agarwal, John Simonaitis, Vivek K. Goyal, Karl K. Berggren

Abstract: Scanning electron microscopy (SEM) is a versatile technique used to image samples at the nanoscale. Conventional imaging by this technique relies on finding the average intensity of the signal generated on a detector by secondary electrons (SEs) emitted from the sample and is subject to noise due to variations in the voltage signal from the detector. This noise can result in degradation of the SEM… ▽ More Scanning electron microscopy (SEM) is a versatile technique used to image samples at the nanoscale. Conventional imaging by this technique relies on finding the average intensity of the signal generated on a detector by secondary electrons (SEs) emitted from the sample and is subject to noise due to variations in the voltage signal from the detector. This noise can result in degradation of the SEM image quality for a given imaging dose. SE count imaging, which uses the direct count of SEs detected from the sample instead of the average signal intensity, would overcome this limitation and lead to improvement in SEM image quality. In this paper, we implement an SE count imaging scheme by synchronously outcoupling the detector and beam scan signals from the microscope and using custom code to count detected SEs. We demonstrate a ~30% increase in the image signal-to-noise-ratio due to SE counting compared to conventional imaging. The only external hardware requirement for this imaging scheme is an oscilloscope fast enough to accurately sample the detector signal for SE counting, making the scheme easily implementable on any SEM. △ Less

Submitted 2 November, 2021; originally announced November 2021.

50 Ohm Transmission Lines with Extreme Wavelength Compression Based on Superconducting Nanowires on High-Permittivity Substrates

Authors: Daniel F. Santavicca, Marco Colangelo, Carleigh R. Eagle, Maitri P. Warusawithana, Karl K. Berggren

Abstract: We demonstrate impedance-matched low-loss transmission lines with a signal wavelength more than 150 times smaller than the free space wavelength using superconducting nanowires on high permittivity substrates. A niobium nitride thin film is patterned in a coplanar waveguide (CPW) transmission line geometry on a bilayer substrate consisting of 100 nm of epitaxial strontium titanate on high-resitivi… ▽ More We demonstrate impedance-matched low-loss transmission lines with a signal wavelength more than 150 times smaller than the free space wavelength using superconducting nanowires on high permittivity substrates. A niobium nitride thin film is patterned in a coplanar waveguide (CPW) transmission line geometry on a bilayer substrate consisting of 100 nm of epitaxial strontium titanate on high-resitivity silicon. The use of strontium titanate on silicon enables wafer-scale fabrication and maximizes process compatibility. It also makes it possible to realize a $50$ $Ω$ characteristic impedance across a wide range of CPW widths, from the nanoscale to the macroscale. We fabricated and characterized an approximately $50$ $Ω$ CPW device with two half-wave stub resonators. Comparing the measured transmission coefficient to numerical simulations, we determine that the strontium titanate film has a dielectric constant of $1.1 \times 10^3$ and a loss tangent of not more than 0.009. To facilitate the design of distributed microwave devices based on this type of material system, we describe an analytical model of the CPW properties that gives good agreement with both measurements and simulations. △ Less

Submitted 15 December, 2021; v1 submitted 1 November, 2021; originally announced November 2021.

Journal ref: Appl. Phys. Lett. 119, 252601 (2021)

New constraints on dark matter from superconducting nanowires

Authors: Yonit Hochberg, Benjamin V. Lehmann, Ilya Charaev, Jeff Chiles, Marco Colangelo, Sae Woo Nam, Karl K. Berggren

Abstract: Superconducting nanowires, a mature technology originally developed for quantum sensing, can be used as a target and sensor with which to search for dark matter interactions with electrons. Here we report on a 180-hour measurement of a tungsten silicide superconducting nanowire device with a mass of 4.3 nanograms. We use this to place new constraints on dark matter--electron interactions, includin… ▽ More Superconducting nanowires, a mature technology originally developed for quantum sensing, can be used as a target and sensor with which to search for dark matter interactions with electrons. Here we report on a 180-hour measurement of a tungsten silicide superconducting nanowire device with a mass of 4.3 nanograms. We use this to place new constraints on dark matter--electron interactions, including the strongest terrestrial constraints to date on sub-MeV (sub-eV) dark matter that interacts with electrons via scattering (absorption) processes. △ Less

Submitted 20 December, 2022; v1 submitted 4 October, 2021; originally announced October 2021.

Comments: 5 pages + appendices, 5 figures. Matched published version

Journal ref: Phys. Rev. D 106, 112005 (2022)

New Constraints on Dark Photon Dark Matter with Superconducting Nanowire Detectors in an Optical Haloscope

Authors: Jeff Chiles, Ilya Charaev, Robert Lasenby, Masha Baryakhtar, Junwu Huang, Alexana Roshko, George Burton, Marco Colangelo, Ken Van Tilburg, Asimina Arvanitaki, Sae Woo Nam, Karl K. Berggren

Abstract: Uncovering the nature of dark matter is one of the most important goals of particle physics. Light bosonic particles, such as the dark photon, are well-motivated candidates: they are generally long-lived, weakly-interacting, and naturally produced in the early universe. In this work, we report on LAMPOST (Light $A'$ Multilayer Periodic Optical SNSPD Target), a proof-of-concept experiment searching… ▽ More Uncovering the nature of dark matter is one of the most important goals of particle physics. Light bosonic particles, such as the dark photon, are well-motivated candidates: they are generally long-lived, weakly-interacting, and naturally produced in the early universe. In this work, we report on LAMPOST (Light $A'$ Multilayer Periodic Optical SNSPD Target), a proof-of-concept experiment searching for dark photon dark matter in the eV mass range, via coherent absorption in a multi-layer dielectric haloscope. Using a superconducting nanowire single-photon detector (SNSPD), we achieve efficient photon detection with a dark count rate (DCR) of $\sim 6\times10^{-6}$ counts/s. We find no evidence for dark photon dark matter in the mass range of $\sim 0.7$-$0.8$ eV with kinetic mixing $ε\gtrsim 10^{-12}$, improving existing limits in $ε$ by up to a factor of two. With future improvements to SNSPDs, our architecture could probe significant new parameter space for dark photon and axion dark matter in the meV to 10 eV mass range. △ Less

Submitted 23 May, 2022; v1 submitted 4 October, 2021; originally announced October 2021.

PHz Electronic Device Design and Simulation for Waveguide-Integrated Carrier-Envelope Phase Detection

Authors: Dario Cattozzo Mor, Yujia Yang, Felix Ritzkowsky, Franz X. Kärtner, Karl K. Berggren, Neetesh Kumar Singh, Phillip D. Keathley

Abstract: Carrier-envelope phase (CEP) detection of ultrashort optical pulses and low-energy waveform field sampling have recently been demonstrated using direct time-domain methods that exploit optical-field photoemission from plasmonic nanoantennas. These devices make for compact and integratable solid-state detectors operating at optical frequency that work in ambient conditions and require minute pulse… ▽ More Carrier-envelope phase (CEP) detection of ultrashort optical pulses and low-energy waveform field sampling have recently been demonstrated using direct time-domain methods that exploit optical-field photoemission from plasmonic nanoantennas. These devices make for compact and integratable solid-state detectors operating at optical frequency that work in ambient conditions and require minute pulse energies (picojoule-level). Applications include frequency-comb stabilization, visible to near-infrared time-domain spectroscopy, compact tools for attosecond science and metrology and, due to the high electronic switching speeds, petahertz-scale information processing. However, these devices have been driven by free-space optical waveforms and their implementation within integrated photonic platforms has yet to be demonstrated. In this work, we design and simulate fully-integrated plasmonic bow-tie nanoantennas coupled to a Si$_3$N$_4$-core waveguide for CEP detection. We find that when coupled to realistic on-chip, few-cycle supercontinuum sources, these devices are suitable for direct time-domain CEP detection within integrated photonic platforms. We estimate a signal-to-noise ratio of 30 dB at 50 kHz resolution bandwidth. We address technical details, such as the tuning of the nanoantennas plasmonic resonance and the waveform's CEP slippage in the waveguide. Moreover, we evaluate power losses due to absorption and scattering and we study the device sensitivity to pulse duration and pulse peak field intensity. Our results provide the basis for future design and fabrication of time-domain CEP detectors and allow for the development of fully-integrated attosecond science applications, frequency-comb stabilization and light-wave-based PHz electronics. △ Less

Submitted 26 September, 2021; originally announced September 2021.

Comments: 13 pages, 9 figures, submitted to Journal of Lightwave Technology

Impedance-matched differential superconducting nanowire detectors

Authors: Marco Colangelo, Boris Korzh, Jason P. Allmaras, Andrew D. Beyer, Andrew S. Mueller, Ryan M. Briggs, Bruce Bumble, Marcus Runyan, Martin J. Stevens, Adam N. McCaughan, Di Zhu, Stephen Smith, Wolfgang Becker, Lautaro Narváez, Joshua C. Bienfang, Simone Frasca, Angel E. Velasco, Cristián H. Peña, Edward E. Ramirez, Alexander B. Walter, Ekkehart Schmidt, Emma E. Wollman, Maria Spiropulu, Richard Mirin, Sae Woo Nam , et al. (2 additional authors not shown)

Abstract: Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a h… ▽ More Superconducting nanowire single-photon detectors (SNSPDs) are the highest performing photon-counting technology in the near-infrared (NIR). Due to delay-line effects, large area SNSPDs typically trade-off timing resolution and detection efficiency. Here, we introduce a detector design based on transmission line engineering and differential readout for device-level signal conditioning, enabling a high system detection efficiency and a low detector jitter, simultaneously. To make our differential detectors compatible with single-ended time taggers, we also engineer analog differential-to-single-ended readout electronics, with minimal impact on the system timing resolution. Our niobium nitride differential SNSPDs achieve $47.3\,\% \pm 2.4\,\%$ system detection efficiency and sub-$10\,\mathrm{ps}$ system jitter at $775\,\mathrm{nm}$, while at $1550\,\mathrm{nm}$ they achieve $71.1\,\% \pm 3.7\,\%$ system detection efficiency and $13.1\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ system jitter. These detectors also achieve sub-100 ps timing response at one one-hundredth maximum level, $30.7\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $775\,\mathrm{nm}$ and $47.6\,\mathrm{ps} \pm 0.4\,\mathrm{ps}$ at $1550\,\mathrm{nm}$, enabling time-correlated single-photon counting with high dynamic range response functions. Furthermore, thanks to the differential impedance-matched design, our detectors exhibit delay-line imaging capabilities and photon-number resolution. The properties and high-performance metrics achieved by our system make it a versatile photon-detection solution for many scientific applications. △ Less

Submitted 17 August, 2021; originally announced August 2021.

Physical properties of amorphous molybdenum silicide films for single photon detectors

Authors: Xiaofu Zhang, Ilya Charaev, Huanlong Liu, Tony X. Zhou, Dong Zhu, Karl K. Berggren, Andreas Schilling

Abstract: We systematically investigated the physical properties of amorphous Mo$_{\rm x}$Si$_{1-x}$ films deposited by the magnetron co-sputtering technique. The critical temperature $T_C$ of Mo$_{\rm x}$ Si$_{1-x}$ films increases gradually with the stoichiometry x, and the highest $T_C$=7.9 K was found in Mo$_{\rm 0.83}$ Si$_{0.17}$. Beyond $x$=0.83, preformed Cooper pairs and superconducting domains per… ▽ More We systematically investigated the physical properties of amorphous Mo$_{\rm x}$Si$_{1-x}$ films deposited by the magnetron co-sputtering technique. The critical temperature $T_C$ of Mo$_{\rm x}$ Si$_{1-x}$ films increases gradually with the stoichiometry x, and the highest $T_C$=7.9 K was found in Mo$_{\rm 0.83}$ Si$_{0.17}$. Beyond $x$=0.83, preformed Cooper pairs and superconducting domains persist in the films, despite the superconducting state with perfect zero-resistivity is absent. The thick films of Mo$_{\rm 0.83}$ Si$_{0.17}$ show surprising degradation in which the onset of zero-resistivity is suppressed below 2 K. The thin Mo$_{\rm 0.83}$ Si$_{0.17}$ films, however, reveal robust superconductivity even with thickness d$\leq$1 nm. We also characterized wide microwires based on the 2 nm thin Mo$_{\rm 0.8}$ Si$_{0.2}$ films with widths 40 and 60 $μ$m, which show single-photon sensitivity at 780 nm and 1550 nm wavelength △ Less

Submitted 2 September, 2021; v1 submitted 14 April, 2021; originally announced April 2021.

Nanoantenna Design for Enhanced Carrier-Envelope-Phase Sensitivity

Authors: Drew Buckley, Yujia Yang, Yugu Yang-Keathley, Karl K. Berggren, Phillip D. Keathley

Abstract: Optical-field emission from nanostructured solids such as subwavelength nanoantennas can be leveraged to create sub-femtosecond, PHz-scale electronics for optical-field detection. One application that is of particular interest is the detection of an incident optical pulse's carrier-envelope phase. Such carrier-envelope-phase detection requires few-cycle, broadband optical excitation where the reso… ▽ More Optical-field emission from nanostructured solids such as subwavelength nanoantennas can be leveraged to create sub-femtosecond, PHz-scale electronics for optical-field detection. One application that is of particular interest is the detection of an incident optical pulse's carrier-envelope phase. Such carrier-envelope-phase detection requires few-cycle, broadband optical excitation where the resonant properties of the nanoantenna can strongly alter the response of the near field in time. Little quantitative investigation has been performed to understand how the geometry and resonant properties of the antennae should be tuned to enhance the carrier-envelope phase sensitivity and signal to noise ratio. Here we examine how the geometry and resonance frequency of planar plasmonic nanoantennas can be engineered for enhancing the emitted carrier-envelope-phase-sensitive photocurrent when driven by a few-cycle optical pulse. We find that with the simple addition of curved sidewalls leading to the apex, and proper tuning of the resonance wavelength, the net CEP-sensitive current per nanoantenna can be improved by $5$-$10\times$, and the signal-to-noise-ratio by $50$-$100\times$ relative to simple triangular antennas operated on resonance. Our findings will inform the next generation of nanoantenna designs for emerging applications in ultrafast photoelectron metrology and petahertz electronics. △ Less

Submitted 14 March, 2021; originally announced March 2021.

Precise, Sub-Nanosecond, and High-Voltage Switching of Complex Loads Enabled by Gallium Nitride Electronics

Authors: John W. Simonaitis, Benjamin Slayton, Yugu Yang-Keathley, Phillip D. Keathley, Karl K. Berggren

Abstract: In this work, we report the use of commercial Gallium Nitride (GaN) power electronics to precisely switch complex distributed loads, such as electron lenses and deflectors, without impedance matching. Depending on the chosen GaN field effect transistor (GaNFET) and driver, these GaN pulsers are capable of generating pulses ranging from 100 - 650 V and 5 - 60 A in 0.25 - 8 ns using simple designs w… ▽ More In this work, we report the use of commercial Gallium Nitride (GaN) power electronics to precisely switch complex distributed loads, such as electron lenses and deflectors, without impedance matching. Depending on the chosen GaN field effect transistor (GaNFET) and driver, these GaN pulsers are capable of generating pulses ranging from 100 - 650 V and 5 - 60 A in 0.25 - 8 ns using simple designs with easy control, few-nanosecond propagation delays, and MHz repetition rates. We experimentally demonstrate a simple 250 ps, 100 V pulser measured by a directly coupled 2 GHz oscilloscope. By introducing resistive dampening, we can eliminate ringing to allow for precise 100 V transitions that complete a -10 V to -90 V transition in 1.5 ns, limited primarily by the inductance of the oscilloscope measurement path. The performance of the pulser attached to various load structures is simulated, demonstrating the possibility of even faster switching of internal fields in these loads. These circuits also have 0.25 cm$\mathrm{^2}$ active regions and <1 W power dissipation, enabling their integration into a wide variety of environments and apparatus. The proximity of the GaNFETs to the load due to this integration minimizes parasitic quantities that slow switching as well as remove the need to match from 50 $Ω$ lines by allowing for a lumped element approximation small loads. We expect these GaN pulsers to have broad application in fields such as optics, nuclear sciences, charged particle optics, and atomic physics that require nanosecond, high-voltage transitions. △ Less

Submitted 5 February, 2021; originally announced February 2021.

Comments: 34 pages, 14 figures

Determining Dark Matter-Electron Scattering Rates from the Dielectric Function

Authors: Yonit Hochberg, Yonatan Kahn, Noah Kurinsky, Benjamin V. Lehmann, To Chin Yu, Karl K. Berggren

Abstract: We show that the rate for dark matter-electron scattering in an arbitrary material is determined by an experimentally measurable quantity, the complex dielectric function, for any dark matter interaction that couples to electron density. This formulation automatically includes many-body effects, eliminates all systematic theoretical uncertainties on the electronic wavefunctions, and allows a direc… ▽ More We show that the rate for dark matter-electron scattering in an arbitrary material is determined by an experimentally measurable quantity, the complex dielectric function, for any dark matter interaction that couples to electron density. This formulation automatically includes many-body effects, eliminates all systematic theoretical uncertainties on the electronic wavefunctions, and allows a direct calibration of the spectrum by electromagnetic probes such as infrared spectroscopy, X-ray scattering, and electron energy-loss spectroscopy (EELS). Our formalism applies for several common benchmark models, including spin-independent interactions through scalar and vector mediators of arbitrary mass. We discuss the consequences for standard semiconductor and superconductor targets, and find that the true reach of superconductor detectors for light mediators exceeds previous estimates by several orders of magnitude, with further enhancements possible due to the low-energy tail of the plasmon. Using a heavy-fermion superconductor as an example, we show how our formulation allows a rapid and systematic investigation of novel electron scattering targets. △ Less

Submitted 14 December, 2022; v1 submitted 20 January, 2021; originally announced January 2021.

Comments: 5 pages + references, 2 figures. Includes supplementary material (13 pages, 6 figures). Fixed typo in eq. (S.16)

Journal ref: Phys. Rev. Lett. 127, 151802 (2021)

Electrical Control of Surface Acoustic Waves

Authors: Linbo Shao, Di Zhu, Marco Colangelo, Dae Hun Lee, Neil Sinclair, Yaowen Hu, Peter T. Rakich, Keji Lai, Karl K. Berggren, Marko Loncar

Abstract: Acoustic waves at microwave frequencies have been widely used in wireless communication and recently emerged as versatile information carriers in quantum applications. However, most acoustic devices are passive components, and dynamic control of acoustic waves in a low-loss and scalable manner remains an outstanding challenge, which hinders the development of phononic integrated circuits. Here we… ▽ More Acoustic waves at microwave frequencies have been widely used in wireless communication and recently emerged as versatile information carriers in quantum applications. However, most acoustic devices are passive components, and dynamic control of acoustic waves in a low-loss and scalable manner remains an outstanding challenge, which hinders the development of phononic integrated circuits. Here we demonstrate electrical control of traveling acoustic waves on an integrated lithium niobate platform at both room and millikelvin temperatures. We modulate the phase and amplitude of the acoustic waves and demonstrate an acoustic frequency shifter by serrodyne phase modulation. Furthermore, we show reconfigurable nonreciprocal modulation by tailoring the phase matching between acoustic and quasi-traveling electric fields. Our scalable electro-acoustic platform comprises the fundamental elements for arbitrary acoustic signal processing and manipulation of phononic quantum information. △ Less

Submitted 7 March, 2022; v1 submitted 5 January, 2021; originally announced January 2021.

Journal ref: Nature Electronics 5, 348-355 (2022)

Single-photon detection in the mid-infrared up to 10 micron wavelength using tungsten silicide superconducting nanowire detectors

Authors: V. B. Verma, B. Korzh, A. B. Walter, A. E. Lita, R. M. Briggs, M. Colangelo, Y. Zhai, E. E. Wollman, A. D. Beyer, J. P. Allmaras, B. Bumble, H. Vora, D. Zhu, E. Schmidt, K. K. Berggren, R. P. Mirin, S. W. Nam, M. D. Shaw

Abstract: We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectros… ▽ More We developed superconducting nanowire single-photon detectors (SNSPDs) based on tungsten silicide (WSi) that show saturated internal detection efficiency up to a wavelength of 10 um. These detectors are promising for applications in the mid-infrared requiring ultra-high gain stability, low dark counts, and high efficiency such as chemical sensing, LIDAR, dark matter searches and exoplanet spectroscopy. △ Less

Submitted 17 December, 2020; originally announced December 2020.

Electrostatic electron mirror in SEM for simultaneous imaging of top and bottom surfaces of a sample

Authors: Navid Abedzadeh, M. A. R. Krielaart, Chung-Soo Kim, John Simonaitis, Richard Hobbs, Pieter Kruit, Karl K. Berggren

Abstract: The use of electron mirrors in aberration correction and surface-sensitive microscopy techniques such as low-energy electron microscopy has been established. However, in this work, by implementing an easy to construct, fully electrostatic electron mirror system under a sample in a conventional scanning electron microscope (SEM), we present a new imaging scheme which allows us to form scanned image… ▽ More The use of electron mirrors in aberration correction and surface-sensitive microscopy techniques such as low-energy electron microscopy has been established. However, in this work, by implementing an easy to construct, fully electrostatic electron mirror system under a sample in a conventional scanning electron microscope (SEM), we present a new imaging scheme which allows us to form scanned images of the top and bottom surfaces of the sample simultaneously. We believe that this imaging scheme could be of great value to the field of in-situ SEM which has been limited to observation of dynamic changes such as crack propagation and other surface phenomena on one side of samples at a time. We analyze the image properties when using a flat versus a concave electron mirror system and discuss two different regimes of operation. In addition to in-situ SEM, we foresee that our imaging scheme could open up avenues toward spherical aberration correction by the use of electron mirrors in SEMs without the need for complex beam separators. △ Less

Submitted 17 December, 2020; originally announced December 2020.

A compact and tunable forward coupler based on high-impedance superconducting nanowires

Authors: Marco Colangelo, Di Zhu, Daniel F. Santavicca, Brenden A. Butters, Joshua C. Bienfang, Karl K. Berggren

Abstract: Develo** compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of… ▽ More Develo** compact, low-dissipation, cryogenic-compatible microwave electronics is essential for scaling up low-temperature quantum computing systems. In this paper, we demonstrate an ultra-compact microwave directional forward coupler based on high-impedance slow-wave superconducting-nanowire transmission lines. The coupling section of the fabricated device has a footprint of $416\,\mathrm{μm^2}$. At 4.753 GHz, the input signal couples equally to the through port and forward-coupling port (50:50) at $-6.7\,\mathrm{dB}$ with $-13.5\,\mathrm{dB}$ isolation. The coupling ratio can be controlled with DC bias current or temperature by exploiting the dependence of the kinetic inductance on these quantities. The material and fabrication-process are suitable for direct integration with superconducting circuits, providing a practical solution to the signal distribution bottlenecks in develo** large-scale quantum computers. △ Less

Submitted 23 November, 2020; originally announced November 2020.

Journal ref: Phys. Rev. Applied 15, 024064 (2021)

Refractory doped titanium nitride nanoscale field emitters

Authors: Alberto Nardi, Marco Turchetti, Wesley A. Britton, Yuyao Chen, Yujia Yang, Luca Dal Negro, Karl K. Berggren, Phillip D. Keathley

Abstract: Refractory materials exhibit high damage tolerance, which is attractive for the creation of nanoscale field-emission electronics and optoelectronics applications that require operation at high peak current densities and optical intensities. Recent results have demonstrated that the optical properties of titanium nitride, a refractory and CMOS-compatible plasmonic material, can be tuned by adding s… ▽ More Refractory materials exhibit high damage tolerance, which is attractive for the creation of nanoscale field-emission electronics and optoelectronics applications that require operation at high peak current densities and optical intensities. Recent results have demonstrated that the optical properties of titanium nitride, a refractory and CMOS-compatible plasmonic material, can be tuned by adding silicon and oxygen dopants. However, to fully leverage the potential of titanium (silicon oxy)nitride, a reliable and scalable fabrication process with few-nm precision is needed. In this work, we developed a fabrication process for producing engineered nanostructures with gaps between 10 and 15 nm, aspect ratios larger than 5 with almost 90° steep sidewalls. Using this process, we fabricated large-scale arrays of electrically-connected bow-tie nanoantennas with few-nm free-space gaps. We measured a typical variation of 4 nm in the average gap size. Using applied DC voltages and optical illumination, we tested the electronic and optoelectronic response of the devices, demonstrating sub-10-V tunneling operation across the free-space gaps, and quantum efficiency of up to 1E-3 at 1.2 μm, which is comparable to a bulk silicon photodiode at the same wavelength. Tests demonstrated that the titanium silicon oxynitride nanostructures did not significantly degrade, exhibiting less than 5 nm of shrinking of the average gap dimensions over few-μm^2 areas after roughly 6 hours of operation. Our results will be useful for develo** the next generation of robust and CMOS-compatible nanoscale devices for high-speed and low-power field-emission electronics and optoelectronics applications. △ Less

Submitted 11 November, 2020; originally announced November 2020.

Impact of DC bias on Weak Optical-Field-Driven Electron Emission in Nano-Vacuum-Gap Detectors

Authors: Marco Turchetti, Mina R. Bionta, Yujia Yang, Felix Ritzkowsky, Denis Ricardo Candido, Michael Flatté, Karl K. Berggren, Phillip D. Keathley

Abstract: In this work, we investigate multiphoton and optical-field tunneling emission from metallic surfaces with nanoscale vacuum gaps. Using time-dependent Schrodinger equation (TDSE) simulations, we find that the properties of the emitted photocurrent in such systems can be greatly altered by the application of only a few-volt DC bias. We find that when coupled with expected plasmonic enhancements with… ▽ More In this work, we investigate multiphoton and optical-field tunneling emission from metallic surfaces with nanoscale vacuum gaps. Using time-dependent Schrodinger equation (TDSE) simulations, we find that the properties of the emitted photocurrent in such systems can be greatly altered by the application of only a few-volt DC bias. We find that when coupled with expected plasmonic enhancements within the nanometer-scale metallic gaps, the application of this DC bias significantly reduces the threshold for the transition to optical-field-driven tunneling from the metal surface, and could sufficiently enhance the emitted photocurrents, to make it feasible to electronically tag fJ ultrafast pulses at room temperature. Given the petahertz-scale instantaneous response of the photocurrents, and the low effective capacitance of thin-film nanoantenna devices that enables < 1 fs response time, detectors that exploit this bias-enhanced surface emission from nanoscale vacuum gaps could prove to be useful for communication, petahertz electronics, and ultrafast optical-field-resolved metrology. △ Less

Submitted 1 November, 2020; originally announced November 2020.

Journal ref: J. Opt. Soc. Am. B 38, 1009-1016 (2021)

Enhancing the Performance of Superconducting Nanowire-Based Detectors with High-Filling Factor by Using Variable Thickness

Authors: Reza Baghdadi, Ekkehart Schmidt, Saman Jahani, Ilya Charaev, Michael G. W. Muller, Marco Colangelo, Di Zhu, Konstantin Ilin, Alexej D. Semenov, Zubin Jacob, Michael Siegel, Karl K. Berggren

Abstract: Current crowding at bends of superconducting nanowire single-photon detectors is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of be… ▽ More Current crowding at bends of superconducting nanowire single-photon detectors is one of the main factors limiting the performance of meander-style detectors with large filling factors. In this paper, we propose a new concept to reduce influence of the current crowding effect, a so-called variable thickness SNSPD, which is composed of two regions with different thicknesses. A larger thickness of bends in comparison to the thickness of straight nanowire sections locally reduces the current density and reduces the suppression of the critical current caused by the current crowding. This allows variable thickness SNSPD to have a higher critical current, an improved detection efficiency, and decreased dark count rate in comparison with a standard uniform thickness SNSPD with an identical geometry and film quality. △ Less

Submitted 22 October, 2020; originally announced October 2020.

Journal ref: Superconductor Science and Technology (2021)

Superconducting MoN thin films prepared by DC reactive magnetron sputtering for nanowire single-photon detectors

Authors: Lily Hallett, Ilya Charaev, Akshay Agarwal, Andrew Dane, Marco Colangelo, Di Zhu, Karl K. Berggren

Abstract: We present a comprehensive study of molybdenum nitride (MoN) thin film deposition using direct current (DC) reactive magnetron sputtering. We have investigated the effect of various deposition conditions on the superconducting and electrical properties of the films. Furthermore, we have shown that meander-shaped single-photon detectors made from 5 nm MoN films have saturated quantum detection effi… ▽ More We present a comprehensive study of molybdenum nitride (MoN) thin film deposition using direct current (DC) reactive magnetron sputtering. We have investigated the effect of various deposition conditions on the superconducting and electrical properties of the films. Furthermore, we have shown that meander-shaped single-photon detectors made from 5 nm MoN films have saturated quantum detection efficiency at the telecom wavelength of 1550 nm. Our results indicate that MoN may be a material of interest for practical applications of low-temperature superconductors, including single-photon detectors and transition-edge sensors. △ Less

Submitted 28 October, 2020; v1 submitted 20 October, 2020; originally announced October 2020.

On-chip sampling of optical fields with attosecond resolution

Authors: Mina R. Bionta, Felix Ritzkowsky, Marco Turchetti, Yujia Yang, Dario Cattozzo Mor, William P. Putnam, Franz X. Kärtner, Karl K. Berggren, Phillip D. Keathley

Abstract: Time-domain sampling of arbitrary electric fields with sub-cycle resolution enables a complete time-frequency analysis of a system's response to electromagnetic illumination. This provides access to dynamic information that is not provided by absorption spectra alone, and has recently been shown through measurements in the infrared that time-domain optical-field sampling offers significant improve… ▽ More Time-domain sampling of arbitrary electric fields with sub-cycle resolution enables a complete time-frequency analysis of a system's response to electromagnetic illumination. This provides access to dynamic information that is not provided by absorption spectra alone, and has recently been shown through measurements in the infrared that time-domain optical-field sampling offers significant improvements with regard to molecular sensitivity and limits of detection compared to traditional spectroscopic methods. Despite the many scientific and technological motivations, time-domain, optical-field sampling systems operating in the visible to near-infrared spectral regions are seldom accessible, requiring large driving pulse energies, and large laser amplifier systems, bulky apparatuses, and vacuum environments. Here, we demonstrate an all-on-chip, optoelectronic device capable of sampling arbitrary, low-energy, near-infrared waveforms under ambient conditions. Our solid-state integrated detector uses optical-field-driven electron emission from resonant nanoantennas to achieve petahertz-level switching speeds by generating on-chip attosecond electron bursts. These bursts are used to probe the electric field of weak optical transients. We demonstrated our devices by sampling the electric field of a ~5 fJ, broadband near-infrared ultrafast laser pulse using a ~50 pJ near-infrared driving pulse. Our sampling measurements recovered the weak optical transient as well as localized plasmonic dynamics of the emitting nanoantennas $in~situ$. This field-sampling device--with its compact footprint and low pulse-energy requirements--offers opportunities in a variety of applications, including: broadband time-domain spectroscopy in the molecular fingerprint region, time-domain analysis of nonlinear phenomena, and detailed studies of strong-field light-matter interactions. △ Less

Submitted 13 September, 2020; originally announced September 2020.

Image-Histogram-based Secondary Electron Counting to Evaluate Detective Quantum Efficiency in SEM

Authors: Akshay Agarwal, John Simonaitis, Karl K. Berggren

Abstract: Scanning electron microscopy is a powerful tool for nanoscale imaging of organic and inorganic materials. An important metric for characterizing the limits of performance of these microscopes is the Detective Quantum Efficiency (DQE), which measures the fraction of emitted secondary electrons (SEs) that are detected by the SE detector. However, common techniques for measuring DQE approximate the S… ▽ More Scanning electron microscopy is a powerful tool for nanoscale imaging of organic and inorganic materials. An important metric for characterizing the limits of performance of these microscopes is the Detective Quantum Efficiency (DQE), which measures the fraction of emitted secondary electrons (SEs) that are detected by the SE detector. However, common techniques for measuring DQE approximate the SE emission process to be Poisson distributed, which can lead to incorrect DQE values. In this paper, we introduce a technique for measuring DQE in which we directly count the mean number of secondary electrons detected from a sample using image histograms. This technique does not assume Poisson distribution of SEs and makes it possible to accurately measure DQE for a wider range of imaging conditions. As a demonstration of our technique, we map the variation of DQE as a function of working distance in the microscope. △ Less

Submitted 13 August, 2020; v1 submitted 4 August, 2020; originally announced August 2020.

A superconducting nanowire spiking element for neural networks

Authors: Emily Toomey, Ken Segall, Matteo Castellani, Marco Colangelo, Nancy Lynch, Karl K. Berggren

Abstract: As the limits of traditional von Neumann computing come into view, the brain's ability to communicate vast quantities of information using low-power spikes has become an increasing source of inspiration for alternative architectures. Key to the success of these largescale neural networks is a power-efficient spiking element that is scalable and easily interfaced with traditional control electronic… ▽ More As the limits of traditional von Neumann computing come into view, the brain's ability to communicate vast quantities of information using low-power spikes has become an increasing source of inspiration for alternative architectures. Key to the success of these largescale neural networks is a power-efficient spiking element that is scalable and easily interfaced with traditional control electronics. In this work, we present a spiking element fabricated from superconducting nanowires that has pulse energies on the order of ~10 aJ. We demonstrate that the device reproduces essential characteristics of biological neurons, such as a refractory period and a firing threshold. Through simulations using experimentally measured device parameters, we show how nanowire-based networks may be used for inference in image recognition, and that the probabilistic nature of nanowire switching may be exploited for modeling biological processes and for applications that rely on stochasticity. △ Less

Submitted 29 July, 2020; originally announced July 2020.

Comments: 5 main figures; 7 supplemental figures

Electron-Energy Loss of Ultraviolet Plasmonic Modes in Aluminum Nanodisks

Authors: Yujia Yang, Richard G. Hobbs, Phillip D. Keathley, Karl K. Berggren

Abstract: We theoretically investigated electron energy loss spectroscopy (EELS) of ultraviolet surface plasmon modes in aluminum nanodisks. Using full-wave simulations, we studied the impact of diameter on the resonant modes of the nanodisks. We found that the mode behavior can be separately classified for two distinct cases: (1) flat nanodisks where the diameter is much less than the thickness; and (2) th… ▽ More We theoretically investigated electron energy loss spectroscopy (EELS) of ultraviolet surface plasmon modes in aluminum nanodisks. Using full-wave simulations, we studied the impact of diameter on the resonant modes of the nanodisks. We found that the mode behavior can be separately classified for two distinct cases: (1) flat nanodisks where the diameter is much less than the thickness; and (2) thick nanodisks where the diameter is comparable to the thickness. While the multipolar edge modes and breathing modes of flat nanostructures have previously been interpreted using intuitive, analytical models based on surface plasmon polariton (SPP) modes of a thin-film stack, it has been found that the true dispersion relation of the multipolar edge modes deviates significantly from the SPP dispersion relation. Here, we developed a modified intuitive model that uses effective wavelength theory to accurately model this dispersion relation with significantly less computational overhead compared to full-wave electromagnetic simulations. However, for the case of thick nanodisks, this effective wavelength theory breaks down, and such intuitive models are no longer viable. We found that this is because some modes of the thick nanodisks carry a polar (i.e. out of the substrate plane, or along the electron beam direction) dependence and cannot be simply categorized as radial breathing modes or angular (azimuthal) multipolar edge modes. This polar dependence leads to radiative losses, motivating the use of simultaneous EELS and cathodoluminescence measurements when experimentally investigating the complex mode behavior of thick nanostructures. △ Less

Submitted 22 July, 2020; originally announced July 2020.

Cavity electro-optics in thin-film lithium niobate for efficient microwave-to-optical transduction

Authors: Jeffrey Holzgrafe, Neil Sinclair, Di Zhu, Amirhassan Shams-Ansari, Marco Colangelo, Yaowen Hu, Mian Zhang, Karl K. Berggren, Marko Lončar

Abstract: Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical… ▽ More Linking superconducting quantum devices to optical fibers via microwave-optical quantum transducers may enable large scale quantum networks. For this application, transducers based on the Pockels electro-optic (EO) effect are promising for their direct conversion mechanism, high bandwidth, and potential for low-noise operation. However, previously demonstrated EO transducers require large optical pump power to overcome weak EO coupling and reach high efficiency. Here, we create an EO transducer in thin-film lithium niobate, leveraging the low optical loss and strong EO coupling in this platform. We demonstrate a transduction efficiency of up to $2.7\times10^{-5}$, and a pump-power normalized efficiency of $1.9\times10^{-6}/\mathrm{μW}$. The transduction efficiency can be improved by further reducing the microwave resonator's piezoelectric coupling to acoustic modes, increasing the optical resonator quality factor to previously demonstrated levels, and changing the electrode geometry for enhanced EO coupling. We expect that with further development, EO transducers in thin-film lithium niobate can achieve near-unity efficiency with low optical pump power. △ Less

Submitted 11 May, 2020; v1 submitted 2 May, 2020; originally announced May 2020.

Superconducting Nanowire Fabrication on Niobium Nitride using Helium Ion Irradiation

Authors: Glenn D. Martinez, Drew Buckley, Ilya Charaev, Andrew Dane, Douglas E. Dow, Karl K. Berggren

Abstract: Superconducting devices are prone to reduced performance caused by impurities and defects along the edges of their wires, which can lead to local current crowding. In this study, we explored the use of helium ion irradiation to modify the lattice structure of the superconducting material to change its intrinsic properties. The process will allow us to directly pattern devices and potentially impro… ▽ More Superconducting devices are prone to reduced performance caused by impurities and defects along the edges of their wires, which can lead to local current crowding. In this study, we explored the use of helium ion irradiation to modify the lattice structure of the superconducting material to change its intrinsic properties. The process will allow us to directly pattern devices and potentially improve the quality of the nanowires. To achieve this, we used the ion beam from a scanning helium ion microscope (HIM) to localize damage on a superconducting material to create a nanowire. Two experiments were performed in this study. First, a range of helium ion doses was exposed on a niobium nitride (NbN) microwire to determine the estimated dose density to suppress superconductivity. Using the results of this first experiment, nanowires were patterned onto a microwire, and the current-voltage characteristics were measured for each sample. Our results showed that helium ion irradiation is an effective resistless fabrication method for superconducting nanowires. △ Less

Submitted 5 March, 2020; originally announced March 2020.

Large-area microwire MoSi single-photon detectors at 1550 nm wavelength

Authors: Ilya Charaev, Yukimi Morimoto, Andrew Dane, Akshay Agarwal, Marco Colangelo, Karl K. Berggren

Abstract: We demonstrate saturated internal detection efficiency at 1550 nm wavelengths for meander-shaped superconducting nanowire single-photon detectors made of 3 nm thick MoSi films with widths of 1 and 3 $μm$, and active areas up to 400 by 400 $μm^2$. Despite hairpin turns and a large number of squares (up to $10^4$) in the device, the dark count rate was measured to be ~10$^3$ cps at 99% of the switch… ▽ More We demonstrate saturated internal detection efficiency at 1550 nm wavelengths for meander-shaped superconducting nanowire single-photon detectors made of 3 nm thick MoSi films with widths of 1 and 3 $μm$, and active areas up to 400 by 400 $μm^2$. Despite hairpin turns and a large number of squares (up to $10^4$) in the device, the dark count rate was measured to be ~10$^3$ cps at 99% of the switching current. This value is about two orders of magnitude lower than results reported recently for short MoSi devices with shunt resistors. We also found that 5 nm thick MoSi detectors with the same geometry were insensitive to single near-infrared photons, which may be associated with different levels of suppression of the superconducting order parameter. However, our results obtained on 3 nm thick MoSi devices are in a good agreement with predictions in the frame of a kinetic-equation approach. △ Less

Submitted 10 June, 2020; v1 submitted 20 February, 2020; originally announced February 2020.

Nanostructured-membrane electron phase plates

Authors: Yujia Yang, Chung-Soo Kim, Richard G. Hobbs, Phillip D. Keathley, Karl K. Berggren

Abstract: Electron beams can acquire designed phase modulations by passing through nanostructured material phase plates. These phase modulations enable electron wavefront sha** and benefit electron microscopy, spectroscopy, lithography, and interferometry. However, in the fabrication of electron phase plates, the typically used focused-ion-beam-milling method limits the fabrication throughput and hence th… ▽ More Electron beams can acquire designed phase modulations by passing through nanostructured material phase plates. These phase modulations enable electron wavefront sha** and benefit electron microscopy, spectroscopy, lithography, and interferometry. However, in the fabrication of electron phase plates, the typically used focused-ion-beam-milling method limits the fabrication throughput and hence the active area of the phase plates. Here, we fabricated large-area electron phase plates with electron-beam lithography and reactive-ion-etching. The phase plates are characterized by electron diffraction in transmission electron microscopes with various electron energies, as well as diffractive imaging in a scanning electron microscope. We found the phase plates could produce a null in the center of the bright-field based on coherent interference of diffractive beams. Our work adds capabilities to the fabrication of electron phase plates. The nullification of the direct beam and the tunable diffraction efficiency demonstrated here also paves the way towards novel dark-field electron-microscopy techniques and tunable electron phase plates. △ Less

Submitted 4 January, 2020; originally announced January 2020.

Light Phase Detection with On-Chip Petahertz Electronic Networks

Authors: Yujia Yang, Marco Turchetti, Praful Vasireddy, William P. Putnam, Oliver Karnbach, Alberto Nardi, Franz X. Kärtner, Karl K. Berggren, Phillip D. Keathley

Abstract: Ultrafast light-matter interactions lead to optical-field-driven photocurrents with an attosecond-level temporal response. These photocurrents can be used to detect the carrier-envelope-phase (CEP) of short optical pulses, and could be utilized to create optical-frequency, petahertz (PHz) electronics for information processing. Despite recent reports on optical-field-driven photocurrents in variou… ▽ More Ultrafast light-matter interactions lead to optical-field-driven photocurrents with an attosecond-level temporal response. These photocurrents can be used to detect the carrier-envelope-phase (CEP) of short optical pulses, and could be utilized to create optical-frequency, petahertz (PHz) electronics for information processing. Despite recent reports on optical-field-driven photocurrents in various nanoscale solid-state materials, little has been done in examining the large-scale integration of these devices. In this work, we demonstrate enhanced, on-chip CEP detection via optical-field-driven photocurrent in a monolithic array of electrically-connected plasmonic bow-tie nanoantennas that are contained within an area of hundreds of square microns. The technique is scalable and could potentially be used for shot-to-shot CEP tagging applications requiring orders of magnitude less pulse energy compared to alternative ionization-based techniques. Our results open new avenues for compact time-domain, on-chip CEP detection, and inform the development of integrated circuits for PHz electronics as well as integrated platforms for attosecond and strong-field science. △ Less

Submitted 15 December, 2019; originally announced December 2019.

Journal ref: Nat Commun 11, 3407 (2020)

Development of Quantum InterConnects for Next-Generation Information Technologies

Authors: David Awschalom, Karl K. Berggren, Hannes Bernien, Sunil Bhave, Lincoln D. Carr, Paul Davids, Sophia E. Economou, Dirk Englund, Andrei Faraon, Marty Fejer, Saikat Guha, Martin V. Gustafsson, Evelyn Hu, Liang Jiang, Jungsang Kim, Boris Korzh, Prem Kumar, Paul G. Kwiat, Marko Lončar, Mikhail D. Lukin, David A. B. Miller, Christopher Monroe, Sae Woo Nam, Prineha Narang, Jason S. Orcutt , et al. (10 additional authors not shown)

Abstract: Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in opti… ▽ More Just as classical information technology rests on a foundation built of interconnected information-processing systems, quantum information technology (QIT) must do the same. A critical component of such systems is the interconnect, a device or process that allows transfer of information between disparate physical media, for example, semiconductor electronics, individual atoms, light pulses in optical fiber, or microwave fields. While interconnects have been well engineered for decades in the realm of classical information technology, quantum interconnects (QuICs) present special challenges, as they must allow the transfer of fragile quantum states between different physical parts or degrees of freedom of the system. The diversity of QIT platforms (superconducting, atomic, solid-state color center, optical, etc.) that will form a quantum internet poses additional challenges. As quantum systems scale to larger size, the quantum interconnect bottleneck is imminent, and is emerging as a grand challenge for QIT. For these reasons, it is the position of the community represented by participants of the NSF workshop on Quantum Interconnects that accelerating QuIC research is crucial for sustained development of a national quantum science and technology program. Given the diversity of QIT platforms, materials used, applications, and infrastructure required, a convergent research program including partnership between academia, industry and national laboratories is required. This document is a summary from a U.S. National Science Foundation supported workshop held on 31 October - 1 November 2019 in Alexandria, VA. Attendees were charged to identify the scientific and community needs, opportunities, and significant challenges for quantum interconnects over the next 2-5 years. △ Less

Submitted 2 January, 2020; v1 submitted 13 December, 2019; originally announced December 2019.

Comments: This is an updated version V2, including expanded text and listing of all co-authors. To whom correspondence should be addressed: Marko Lončar: [email protected]; Michael G. Raymer: [email protected]

Journal ref: PRX Quantum 2, 017002 (2021)

Resolving photon numbers using a superconducting tapered nanowire detector

Authors: Di Zhu, Marco Colangelo, Changchen Chen, Boris A. Korzh, Franco N. C. Wong, Matthew D. Shaw, Karl K. Berggren

Abstract: Time- and number-resolved photon detection is crucial for photonic quantum information processing. Existing photon-number-resolving (PNR) detectors usually have limited timing and dark-count performance or require complex fabrication and operation. Here we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching ta… ▽ More Time- and number-resolved photon detection is crucial for photonic quantum information processing. Existing photon-number-resolving (PNR) detectors usually have limited timing and dark-count performance or require complex fabrication and operation. Here we demonstrate a PNR detector at telecommunication wavelengths based on a single superconducting nanowire with an integrated impedance-matching taper. The prototy** device was able to resolve up to five absorbed photons and had 16.1 ps timing jitter, <2 c.p.s. device dark count rate, $\sim$86 ns reset time, and 5.6% system detection efficiency (without cavity) at 1550 nm. Its exceptional distinction between single- and two-photon responses is ideal for coincidence counting and allowed us to directly observe bunching of photon pairs from a single output port of a Hong-Ou-Mandel interferometer. This detector architecture may provide a practical solution to applications that require high timing resolution and few-photon discrimination. △ Less

Submitted 21 November, 2019; originally announced November 2019.

Journal ref: Nano Lett. 20(5), 3858-3863 (2020)