Showing 1–21 of 21 results for author: Berg, J S

Microbial iron reduction under oxic conditions: implications for subsurface biogeochemistry

Authors: Giulia Ceriotti, Alice Bosco-Santos, Sergey M. Borisov, Jasmine S. Berg

Abstract: Iron (Fe) reduction is one of Earth's most ancient microbial metabolisms, but after atmosphere-ocean oxygenation, this anaerobic process was relegated to niche anoxic environments below the water and soil surface. However, new technologies to monitor redox processes at the microscale relevant to microbial cells have recently revealed that the oxygen (O2) concentrations controlling the distribution… ▽ More Iron (Fe) reduction is one of Earth's most ancient microbial metabolisms, but after atmosphere-ocean oxygenation, this anaerobic process was relegated to niche anoxic environments below the water and soil surface. However, new technologies to monitor redox processes at the microscale relevant to microbial cells have recently revealed that the oxygen (O2) concentrations controlling the distribution of aerobic and anaerobic metabolisms are more heterogeneous than previously believed. To explore how O2 levels regulate microbial Fe reduction, we cultivated a facultative Fe-reducing bacterium using a cutting-edge microfluidic reactor integrated with transparent planar O2 sensors. Contrary to expectations, microbial growth induced Fe(III)-oxide (ferrihydrite) reduction under fully oxygenated conditions without forming O2-depleted microsites. Batch incubations highlighted the importance of the process at a larger scale, fundamentally changing our understanding of Fe cycling from the conceptualization of metal and nutrient mobility in the subsurface to our interpretation of Fe mineralogy in the rock record. △ Less

Submitted 10 April, 2024; originally announced April 2024.

Towards a Muon Collider

Authors: Carlotta Accettura, Dean Adams, Rohit Agarwal, Claudia Ahdida, Chiara Aimè, Nicola Amapane, David Amorim, Paolo Andreetto, Fabio Anulli, Robert Appleby, Artur Apresyan, Aram Apyan, Sergey Arsenyev, Pouya Asadi, Mohammed Attia Mahmoud, Aleksandr Azatov, John Back, Lorenzo Balconi, Laura Bandiera, Roger Barlow, Nazar Bartosik, Emanuela Barzi, Fabian Batsch, Matteo Bauce, J. Scott Berg , et al. (272 additional authors not shown)

Abstract: A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders desi… ▽ More A muon collider would enable the big jump ahead in energy reach that is needed for a fruitful exploration of fundamental interactions. The challenges of producing muon collisions at high luminosity and 10 TeV centre of mass energy are being investigated by the recently-formed International Muon Collider Collaboration. This Review summarises the status and the recent advances on muon colliders design, physics and detector studies. The aim is to provide a global perspective of the field and to outline directions for future work. △ Less

Submitted 27 November, 2023; v1 submitted 15 March, 2023; originally announced March 2023.

Comments: 118 pages, 103 figures

Muon Collider Forum Report

Authors: K. M. Black, S. **dariani, D. Li, F. Maltoni, P. Meade, D. Stratakis, D. Acosta, R. Agarwal, K. Agashe, C. Aime, D. Ally, A. Apresyan, A. Apyan, P. Asadi, D. Athanasakos, Y. Bao, E. Barzi, N. Bartosik, L. A. T. Bauerdick, J. Beacham, S. Belomestnykh, J. S. Berg, J. Berryhill, A. Bertolin, P. C. Bhat , et al. (160 additional authors not shown)

Abstract: A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently availab… ▽ More A multi-TeV muon collider offers a spectacular opportunity in the direct exploration of the energy frontier. Offering a combination of unprecedented energy collisions in a comparatively clean leptonic environment, a high energy muon collider has the unique potential to provide both precision measurements and the highest energy reach in one machine that cannot be paralleled by any currently available technology. The topic generated a lot of excitement in Snowmass meetings and continues to attract a large number of supporters, including many from the early career community. In light of this very strong interest within the US particle physics community, Snowmass Energy, Theory and Accelerator Frontiers created a cross-frontier Muon Collider Forum in November of 2020. The Forum has been meeting on a monthly basis and organized several topical workshops dedicated to physics, accelerator technology, and detector R&D. Findings of the Forum are summarized in this report. △ Less

Submitted 8 August, 2023; v1 submitted 2 September, 2022; originally announced September 2022.

Design concept for the second interaction region for Electron-Ion Collider

Authors: B. R. Gamage, E. -C. Aschenauer, J. S. Berg, V. Burkert, R. Ent, Y. Furletova, D. Higinbotham, A. Hutton, C. Hyde, A. Jentsch, A. Kiselev, F. Lin, T. Michalski, C. Montag, V. S. Morozov, P. Nadel-Turonski, R. Palmer, B. Parker, V. Ptitsyn, R. Rajput-Ghoshal, D. Romanov, T. Satogata, A. Seryi, A. Sy, C. Weiss , et al. (5 additional authors not shown)

Abstract: The possibility of two interaction regions (IRs) is a design requirement for the Electron Ion Collider (the EIC). There is also a significant interest from the nuclear physics community in a 2nd IR with measurements capabilities complementary to those of the first IR. While the 2nd IR will be in operation over the entire energy range of ~20GeV to ~140GeV center of mass (CM). The 2nd IR can also pr… ▽ More The possibility of two interaction regions (IRs) is a design requirement for the Electron Ion Collider (the EIC). There is also a significant interest from the nuclear physics community in a 2nd IR with measurements capabilities complementary to those of the first IR. While the 2nd IR will be in operation over the entire energy range of ~20GeV to ~140GeV center of mass (CM). The 2nd IR can also provide an acceptance coverage complementary to that of the first. We present a brief overview and the current progress of the 2nd IR design in terms of the parameters, magnet layout, and beam dynamics. △ Less

Submitted 20 August, 2021; v1 submitted 27 May, 2021; originally announced May 2021.

Comments: To be published in the proceedings of IPAC'21

Measurement of the Per Cavity Energy Recovery Efficiency in the Single Turn CBETA Configuration

Authors: C. Gulliford, N. Banerjee, A. Bartnik, J. Crittenden, K. Deitrick, G. H. Hoffstaetter, P. Quigley, K. Smolenski, J. S. Berg, R. Michnoff, S. Peggs, D. Trbojevic

Abstract: Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficienc… ▽ More Prior to establishing operation of the world's first mulit-turn superconducting Energy Recovery Linac, (ERL) the Cornell-BNL Energy Recovery Test Accelerator (CBETA) was configured for one turn energy recovery. In this setup, direct measurement of the beam loading in each of the main linac cavities demonstrated high energy recovery efficiency. Specifically, a total one-turn power balance efficiency of 99.4%, with per cavity power balances ranging from 99.2-99.8%, was measured. When accounting for small particle losses occurring in the path length adjustment sections of the return loop, this corresponds to per cavity single particle energy recovery efficiencies ranging from 99.8 to 100.5%. A maximum current of 70 microamps was energy recovered, limited by radiation shielding of the beam stop in its preliminary installation. △ Less

Submitted 28 October, 2020; originally announced October 2020.

Beam Commissioning Results from the CBETA Fractional Arc Test

Authors: C. Gulliford, N. Banerjee, A. Bartnik, J. S. Berg, J. Crittenden, J. Dobbins, R. Hulsart, J. Jones, D. J. Kelliher, B. Kuske, W. Lou, M. McAteer, R. Michnoff, S. Peggs, P. Quigley, D. Sagan, K. Smolenski, V. Vesherevich, D. Widger, G. H. Hoffstaetter, D. Trbojevic

Abstract: This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) r… ▽ More This work describes first commissioning results from the Cornell Brookhaven Energy Recovery Test Accelerator Fractional Arc Test. These include the recommissioning of the Cornell photo-injector, the first full energy operation of the main linac with beam, as well as commissioning of the lowest energy matching beamline (splitter) and a partial section of the Fixed Field Alternating gradient (FFA) return loop featuring first production Halbach style permanent magnets. Achieving these tasks required characterization of the injection beam, calibration and phasing of the main linac cavities, demonstration of the required 36 MeV energy gain, and measurement of the splitter line horizontal dispersion and R56 at the nominal 42 MeV. In addition, a procedure for determining the BPM offsets, as well as the tune per cell in the FFA section via scanning the linac energy and inducing betatron oscillations around the periodic orbit in the fractional arc was developed and tested. A detailed comparison of these measurements to simulation is discussed. △ Less

Submitted 11 February, 2019; v1 submitted 8 February, 2019; originally announced February 2019.

CBETA Design Report, Cornell-BNL ERL Test Accelerator

Authors: G. H. Hoffstaetter, D. Trbojevic, C. Mayes, N. Banerjee, J. Barley, I. Bazarov, A. Bartnik, J. S. Berg, S. Brooks, D. Burke, J. Crittenden, L. Cultrera, J. Dobbins, D. Douglas, B. Dunham, R. Eichhorn, S. Full, F. Furuta, C. Franck, R. Gallagher, M. Ge, C. Gulliford, B. Heltsley, D. Jusic, R. Kaplan , et al. (29 additional authors not shown)

Abstract: This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Rec… ▽ More This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science. △ Less

Submitted 13 June, 2017; originally announced June 2017.

Amplitude dependent orbital period in alternating gradient accelerators

Authors: S. Machida, D. J. Kelliher, C. S. Edmonds, I. W. Kirkman, J. S. Berg, J. K. Jones, B. D. Muratori, J. M. Garland

Abstract: Orbital period in a ring accelerator and time of flight in a linear accelerator depend on the amplitude of betatron oscillations. The variation is negligible in ordinary particle accelerators with relatively small beam emittance. In an accelerator for large emittance beams like muons and unstable nuclei, however, this effect cannot be ignored. We measured orbital period in a linear non-scaling fix… ▽ More Orbital period in a ring accelerator and time of flight in a linear accelerator depend on the amplitude of betatron oscillations. The variation is negligible in ordinary particle accelerators with relatively small beam emittance. In an accelerator for large emittance beams like muons and unstable nuclei, however, this effect cannot be ignored. We measured orbital period in a linear non-scaling fixed field alternating gradient (FFAG) accelerator, which is a candidate for muon acceleration, and compared with the theoretical prediction. The good agreement between them gives important ground for the design of particle accelerators for a new generation of particle and nuclear physics experiments. △ Less

Submitted 12 January, 2016; originally announced January 2016.

Comments: 9 pages, 3 figures

Concept for a Future Super Proton-Proton Collider

Authors: **gyu Tang, J. Scott Berg, Wei** Chai, Fusan Chen, Nian Chen, Weiren Chou, Haiyi Dong, Jie Gao, Tao Han, Yongbin Leng, Guangrui Li, Ramesh Gupta, Peng Li, Zhihui Li, Baiqi Liu, Yudong Liu, Xinchou Lou, Qing Luo, Ernie Malamud, Lijun Mao, Robert B. Palmer, Quanling Peng, Yuemei Peng, Manqi Ruan, GianLuca Sabbi , et al. (26 additional authors not shown)

Abstract: Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physics beyond the Standard Model. In China, a two-stage circular collider project CEPC-SPPC is proposed, with the first stage CEPC (Circular Electron Positron Collier, a so-called Higgs factory) focused on Higgs physics, and… ▽ More Following the discovery of the Higgs boson at LHC, new large colliders are being studied by the international high-energy community to explore Higgs physics in detail and new physics beyond the Standard Model. In China, a two-stage circular collider project CEPC-SPPC is proposed, with the first stage CEPC (Circular Electron Positron Collier, a so-called Higgs factory) focused on Higgs physics, and the second stage SPPC (Super Proton-Proton Collider) focused on new physics beyond the Standard Model. This paper discusses this second stage. △ Less

Submitted 19 July, 2015; v1 submitted 12 July, 2015; originally announced July 2015.

Comments: 34 pages, 8 figures, 5 tables

The EUROnu Project

Authors: T. R. Edgecock, O. Caretta, T. Davenne, C. Densham, M. Fitton, D. Kelliher, P. Loveridge, S. Machida, C. Prior, C. Rogers, M. Rooney, J. Thomason, D. Wilcox, E. Wildner, I. Efthymiopoulos, R. Garoby, S. Gilardoni, C. Hansen, E. Benedetto, E. Jensen, A. Kosmicki, M. Martini, J. Osborne, G. Prior, T. Stora , et al. (146 additional authors not shown)

Abstract: The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the… ▽ More The EUROnu project has studied three possible options for future, high intensity neutrino oscillation facilities in Europe. The first is a Super Beam, in which the neutrinos come from the decay of pions created by bombarding targets with a 4 MW proton beam from the CERN High Power Superconducting Proton Linac. The far detector for this facility is the 500 kt MEMPHYS water Cherenkov, located in the Fréjus tunnel. The second facility is the Neutrino Factory, in which the neutrinos come from the decay of μ+ and μ- beams in a storage ring. The far detector in this case is a 100 kt Magnetised Iron Neutrino Detector at a baseline of 2000 km. The third option is a Beta Beam, in which the neutrinos come from the decay of beta emitting isotopes, in particular 6He and 18Ne, also stored in a ring. The far detector is also the MEMPHYS detector in the Fréjus tunnel. EUROnu has undertaken conceptual designs of these facilities and studied the performance of the detectors. Based on this, it has determined the physics reach of each facility, in particular for the measurement of CP violation in the lepton sector, and estimated the cost of construction. These have demonstrated that the best facility to build is the Neutrino Factory. However, if a powerful proton driver is constructed for another purpose or if the MEMPHYS detector is built for astroparticle physics, the Super Beam also becomes very attractive. △ Less

Submitted 17 May, 2013; originally announced May 2013.

Comments: Results from the Framework Programme 7 project EUROnu, which studied three possible accelerator facilities for future high intensity neutrino oscillation facilities in Europe

Journal ref: Phys. Rev. ST Accel. Beams 16 021002 (2013)

Interim Design Report

Authors: R. J. Abrams, S. K. Agarwalla, A. Alekou, C. Andreopoulos, C. M. Ankenbrandt, S. Antusch, M. Apollonio, M. Aslaninejad, J. Back, P. Ballett, G. Barker, K. B. Beard, E. Benedetto, J. R. J. Bennett, J. S. Berg, S. Bhattacharya, V. Blackmore, M. Blennow, A. Blondel, A. Bogacz, M. Bonesini, C. Bontoiu, C. Booth, C. Bromberg, S. Brooks , et al. (111 additional authors not shown)

Abstract: The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires a… ▽ More The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires an Interim Design Report to be delivered midway through the project as a step on the way to the RDR. This document, the IDR, has two functions: it marks the point in the IDS-NF at which the emphasis turns to the engineering studies required to deliver the RDR and it documents baseline concepts for the accelerator complex, the neutrino detectors, and the instrumentation systems. The IDS-NF is, in essence, a site-independent study. Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific issues to be addressed in the cost analysis that will be presented in the RDR. The choice of example sites should not be interpreted as implying a preferred choice of site for the facility. △ Less

Submitted 13 December, 2011; originally announced December 2011.

Report number: IDS-NF-020; BNL-96453-2011; CERN-ATS-2011-216; EUROnu-WP1-05; FERMILAB-PUB-11-581-APC; RAL-TR-2011-018

Open Cavity Solutions to the rf in Magnetic Field Problem

Authors: R. Palmer, J. Scott Berg, R. Fernow, J. C. gallardo, H. Kirk

Abstract: It has been observed \cite{break} that breakdown in an 805 MHz pill-box cavi ty occurs at much lower gradients as an external axial magnetic field is inc reased. This effect was not observed with on open iris cavity. It is propose d that this effect depends on the relative angles of the magnetic and maximu m electric fields: parallel in the pill-box case; at an angle in the open ir is case. If s… ▽ More It has been observed \cite{break} that breakdown in an 805 MHz pill-box cavi ty occurs at much lower gradients as an external axial magnetic field is inc reased. This effect was not observed with on open iris cavity. It is propose d that this effect depends on the relative angles of the magnetic and maximu m electric fields: parallel in the pill-box case; at an angle in the open ir is case. If so, using an open iris structure with solenoid coils in the iris es should perform even better. A lattice, using this principle, is presented, for use in 6D cooling for a Muon Collider. Experimental layouts to test th is principle are proposed. △ Less

Submitted 29 November, 2007; originally announced November 2007.

Comments: 3 pages, 7 figures color; submitted to NUFAC07

Journal ref: AIP Conf.Proc.981:306-308,2008

A Complete Scheme of Ionization Cooling for a Muon Collider

Authors: Robert B. Palmer, J. Scott Berg, Richard C. Fernow, Juan Carlos Gallardo, Harold G. Kirk, Yuri Alexahin, David Neuffer, Stephen Alan Kahn, Don Summers

Abstract: A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains… ▽ More A complete scheme for production and cooling a muon beam for three specified muon colliders is presented. Parameters for these muon colliders are given. The scheme starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Emittance exchange cooling in slow helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further slow helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids using high Tc superconductor at 4 K. Preliminary simulations of each element are presented. △ Less

Submitted 27 November, 2007; originally announced November 2007.

Comments: 3 pages, 6 figures

Report number: BNL-78088-2007-CP

Journal ref: Conf.Proc.C070625:3193,2007

A Complete Scheme for a Muon Collider

Authors: Robert B. Palmer, J. Scott Berg, Richard C. Fernow, Juan Carlos Gallardo, Harold G. Kirk, ; Yuri Alexahin, David Neuffer, ; Stephen Alan Kahn, ; Don J. Summers

Abstract: A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it beco… ▽ More A complete scheme for production, cooling, acceleration, and ring for a 1.5 TeV center of mass muon collider is presented, together with parameters for two higher energy machines. The schemes starts with the front end of a proposed neutrino factory that yields bunch trains of both muon signs. Six dimensional cooling in long-period helical lattices reduces the longitudinal emittance until it becomes possible to merge the trains into single bunches, one of each sign. Further cooling in all dimensions is applied to the single bunches in further helical lattices. Final transverse cooling to the required parameters is achieved in 50 T solenoids. △ Less

Submitted 18 September, 2007; originally announced September 2007.

Comments: 5 pages, 9 figures (EPS); submitted to Proceedings of COOL 07 Workshop

Report number: NFMCC-doc-519

Journal ref: Conf.Proc.C07091010:tum2i06,2007

Ionization Cooling in all Phase Space Planes with Various Absorber Shapes, Including Parallel-Faced Absorbers

Authors: J. Scott Berg

Abstract: Ionization cooling in a straight beamline reduces the transverse emittance of a beam, and has little effect on the longitudinal emittance (generally, in fact, it increases the longitudinal emittance). Once the beamline bends, the introduction of dispersion creates a coupling between the transverse and longitudinal planes. If this coupling is handled properly, one can achieve cooling in all three… ▽ More Ionization cooling in a straight beamline reduces the transverse emittance of a beam, and has little effect on the longitudinal emittance (generally, in fact, it increases the longitudinal emittance). Once the beamline bends, the introduction of dispersion creates a coupling between the transverse and longitudinal planes. If this coupling is handled properly, one can achieve cooling in all three phase space planes. This is usually done by placing a wedge-shaped absorber in a region where there is dispersion. I will demonstrate using an eigenvalue analysis that there are other configurations of dispersion and absorber shape that will achieve ionization cooling in all phase space planes. In particular, I will show that a one can even achieve cooling in all phase planes with a parallel-faced absorber in a dispersion-free region. I will use perturbation theory to approximate the change in the cooling rates due to longitudinal-transverse coupling. I will then describe how the cooling of longitudinal oscillations can be understood via the projection of the "longitudinal" eigenmodes into the transverse plane. △ Less

Submitted 29 July, 2006; originally announced July 2006.

Comments: Submitted to Nuclear Instruments and Methods in Physics Research A. 10 pages, 6 figures

Report number: BNL-76794-2006-JA

Journal ref: Nucl.Instrum.Meth.A569:677-684,2006

Amplitude Dependence of Time of Flight and its Connection to Chromaticity

Authors: J. Scott Berg

Abstract: In general, the time of flight of a charged particle in an accelerator will depend on the particle's transverse amplitude. This effect can become important in machines with large transverse emittances, such as muon accelerators. We will describe the effect, its physical origin, and the circumstances where it becomes important. We will then demonstrate that the effect is directly related to chrom… ▽ More In general, the time of flight of a charged particle in an accelerator will depend on the particle's transverse amplitude. This effect can become important in machines with large transverse emittances, such as muon accelerators. We will describe the effect, its physical origin, and the circumstances where it becomes important. We will then demonstrate that the effect is directly related to chromaticity. We will describe the effect on the longitudinal dynamics in various circumstances, including linacs and fixed field alternating gradient accelerators (FFAGs). We will describe methods for correcting the effect, particularly in FFAGs. △ Less

Submitted 29 July, 2006; originally announced July 2006.

Comments: Submitted to Nuclear Instruments and Methods in Physics Research A; 9 pages, 5 figures; minor fix to comments, disable hypertex, it bungled a reference

Report number: BNL-76759-2006-JA

Journal ref: Nucl.Instrum.Meth.A570:15-21,2007

A Cost-Effective Design for a Neutrino Factory

Authors: J. S. Berg, S. A. Bogacz, S. Caspi, J. Cobb, R. C. Fernow, J. C. Gallardo, S. Kahn, H. Kirk, D. Neuffer, R. B. Palmer, K. Paul, H. Witte, M. Zisman

Abstract: There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of m… ▽ More There have been active efforts in the U.S., Europe, and Japan on the design of a Neutrino Factory. This type of facility produces intense beams of neutrinos from the decay of muons in a high energy storage ring. In the U.S., a second detailed Feasibility Study (FS2) for a Neutrino Factory was completed in 2001. Since that report was published, new ideas in bunching, cooling and acceleration of muon beams have been developed. We have incorporated these ideas into a new facility design, which we designate as Study 2B (ST2B), that should lead to significant cost savings over the FS2 design. △ Less

Submitted 10 November, 2005; originally announced November 2005.

Comments: 46 pages, 38 figures; to be submitted to Physical Review Special Topics: Accelerators and Beams

Report number: BNL-75054-2005-JA; MUC-NOTES-327

Journal ref: Phys.Rev.ST Accel.Beams 9:011001,2006

The RFOFO Ionization Cooling Ring for Muons

Authors: R. Palmer, V. Balbekov, J. S. Berg, S. Bracker, L. Cremaldi, R. C. Fernow, J. C. Gallardo, R. Godang, G. Hanson, A. Klier, D. Summers

Abstract: Practical ionization cooling rings could lead to lower cost or improved performance in neutrino factory or muon collider designs. The ring modeled here uses realistic three-dimensional fields. The performance of the ring compares favorably with the linear cooling channel used in the second US Neutrino Factory Study. The normalized 6D emittance of an ideal ring is decreased by a factor of approxi… ▽ More Practical ionization cooling rings could lead to lower cost or improved performance in neutrino factory or muon collider designs. The ring modeled here uses realistic three-dimensional fields. The performance of the ring compares favorably with the linear cooling channel used in the second US Neutrino Factory Study. The normalized 6D emittance of an ideal ring is decreased by a factor of approximately 240, compared with a factor of only 15 for the linear channel. We also examine such \textit{real-world} effects as windows on the absorbers and rf cavities and leaving empty lattice cells for injection and extraction. For realistic conditions the ring decreases the normalized 6D emittance by a factor of 49. △ Less

Submitted 14 April, 2005; originally announced April 2005.

Comments: 27 pages, 18 figures and 5 tables. Submitted to Phys. Rev. ST-AB

Report number: MUC-PUB-COOL_THEORY-314; BNl_PUB-

Journal ref: Phys.Rev.ST Accel.Beams 8:061003,2005

A Pulsed Synchrotron for Muon Acceleration at a Neutrino Factory

Authors: D. J. Summers, A. A. Garren, J. S. Berg, R. B. Palmer

Abstract: A 4600 Hz pulsed synchrotron is considered as a means of accelerating cool muons with superconducting RF cavities from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are held to less than a megawatt by the low machine duty cycle plus 100 micron thick grain oriented silicon steel laminations and 250 micron diameter copper wires. Combined function magnets with 20 T/m gradients alternati… ▽ More A 4600 Hz pulsed synchrotron is considered as a means of accelerating cool muons with superconducting RF cavities from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are held to less than a megawatt by the low machine duty cycle plus 100 micron thick grain oriented silicon steel laminations and 250 micron diameter copper wires. Combined function magnets with 20 T/m gradients alternating within single magnets form the lattice. Muon survival is 83%. △ Less

Submitted 6 October, 2003; originally announced October 2003.

Comments: 4 pages, 1 figures, LaTeX, 5th International Workshop on Neutrino Factories and Superbeams (NuFact 03), 5-11 Jun 2003, New York

Journal ref: AIPConf.Proc.721:463-466,2004

A Very Fast Ram** Muon Synchrotron for a Neutrino Factory

Authors: D. J. Summers, J. S. Berg, R. B. Palmer, A. A. Garren

Abstract: A 4600 Hz fast ram** synchrotron is studied as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel laminations and thin copper wires. Combined function magnets with high gradients alternating within single magnets form the lattice. Muon survival is 83%. A 4600 Hz fast ram** synchrotron is studied as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel laminations and thin copper wires. Combined function magnets with high gradients alternating within single magnets form the lattice. Muon survival is 83%. △ Less

Submitted 22 May, 2003; originally announced May 2003.

Comments: 3 pages, 1 figure, LaTex, PAC 2003 Particle Accelerator Conference, Portland

Report number: PAC/2003/TPPB092

Journal ref: Conf.Proc.C030512:1804,2003

Muon Acceleration with a Very Fast Ram** Synchrotron for a Neutrino Factory

Authors: D. J. Summers, J. S. Berg, A. A. Garren, R. B. Palmer

Abstract: A 4600 Hz fast ram** synchrotron is explored as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel laminations and thin copper wires. Combined function magnets with high gradients alternating within single magnets form the lattice we describe. Muon survival is… ▽ More A 4600 Hz fast ram** synchrotron is explored as an economical way of accelerating muons from 4 to 20 GeV/c for a neutrino factory. Eddy current losses are minimized by the low machine duty cycle plus thin grain oriented silicon steel laminations and thin copper wires. Combined function magnets with high gradients alternating within single magnets form the lattice we describe. Muon survival is 83%. △ Less

Submitted 16 December, 2002; originally announced December 2002.

Comments: 8 pages, 2 figures, LaTex, 4th NuFact '02 Workshop (Neutrino Factories based on Muon Storage Rings), London, England, 1-6 Jul 2002, submitted to J. Phys. G

Journal ref: J.Phys.G29:1727-1734,2003