-
Observation of Coherent Spin Waves in a Three-Dimensional Artificial Spin Ice Structure
Authors:
Sourav Sahoo,
Andrew May,
Arjen van Den Berg,
Amrit Kumar Mondal,
Sam Ladak,
Anjan Barman
Abstract:
Harnessing high-frequency spin dynamics in three-dimensional (3D) nanostructures may lead to paradigm-shifting, next generation devices including high density spintronics and neuromorphic systems. Despite remarkable progress in fabrication, the measurement and interpretation of spin dynamics in complex 3D structures remain exceptionally challenging. Here we take a first step and measure coherent s…
▽ More
Harnessing high-frequency spin dynamics in three-dimensional (3D) nanostructures may lead to paradigm-shifting, next generation devices including high density spintronics and neuromorphic systems. Despite remarkable progress in fabrication, the measurement and interpretation of spin dynamics in complex 3D structures remain exceptionally challenging. Here we take a first step and measure coherent spin waves within a 3D artificial spin ice (ASI) structure using Brillouin light scattering. The 3D-ASI was fabricated by using a combination of two-photon lithography and thermal evaporation. Two spin-wave modes were observed in the experiment whose frequencies showed a monotonic variation with the applied field strength. Numerical simulations qualitatively reproduced the observed modes. The simulated mode profiles revealed the collective nature of the modes extending throughout the complex network of nanowires while showing spatial quantization with varying mode quantization numbers. The study shows a well-defined means to explore high-frequency spin dynamics in complex 3D spintronic and magnonic structures.
△ Less
Submitted 20 February, 2021;
originally announced February 2021.
-
Corneal Pachymetry by AS-OCT after Descemet's Membrane Endothelial Keratoplasty
Authors:
Friso G. Heslinga,
Ruben T. Lucassen,
Myrthe A. van den Berg,
Luuk van der Hoek,
Josien P. W. Pluim,
Javier Cabrerizo,
Mark Alberti,
Mitko Veta
Abstract:
Corneal thickness (pachymetry) maps can be used to monitor restoration of corneal endothelial function, for example after Descemet's membrane endothelial keratoplasty (DMEK). Automated delineation of the corneal interfaces in anterior segment optical coherence tomography (AS-OCT) can be challenging for corneas that are irregularly shaped due to pathology, or as a consequence of surgery, leading to…
▽ More
Corneal thickness (pachymetry) maps can be used to monitor restoration of corneal endothelial function, for example after Descemet's membrane endothelial keratoplasty (DMEK). Automated delineation of the corneal interfaces in anterior segment optical coherence tomography (AS-OCT) can be challenging for corneas that are irregularly shaped due to pathology, or as a consequence of surgery, leading to incorrect thickness measurements. In this research, deep learning is used to automatically delineate the corneal interfaces and measure corneal thickness with high accuracy in post-DMEK AS-OCT B-scans. Three different deep learning strategies were developed based on 960 B-scans from 50 patients. On an independent test set of 320 B-scans, corneal thickness could be measured with an error of 13.98 to 15.50 micrometer for the central 9 mm range, which is less than 3% of the average corneal thickness. The accurate thickness measurements were used to construct detailed pachymetry maps. Moreover, follow-up scans could be registered based on anatomical landmarks to obtain differential pachymetry maps. These maps may enable a more comprehensive understanding of the restoration of the endothelial function after DMEK, where thickness often varies throughout different regions of the cornea, and subsequently contribute to a standardized postoperative regime.
△ Less
Submitted 6 April, 2021; v1 submitted 15 February, 2021;
originally announced February 2021.
-
The KM3NeT potential for the next core-collapse supernova observation with neutrinos
Authors:
KM3NeT Collaboration,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
A. Ambrosone,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
G. Anton,
M. Ardid,
S. Ardid,
J. Aublin,
C. Bagatelas,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
F. Benfenati,
E. Berbee,
A. M. van den Berg,
V. Bertin,
S. Biagi,
M. Bissinger
, et al. (223 additional authors not shown)
Abstract:
The KM3NeT research infrastructure is under construction in the Mediterranean Sea. It consists of two water Cherenkov neutrino detectors, ARCA and ORCA, aimed at neutrino astrophysics and oscillation research, respectively. Instrumenting a large volume of sea water with $\sim$ 6,200 optical modules comprising a total of $\sim$ 200,000 photomultiplier tubes, KM3NeT will achieve sensitivity to…
▽ More
The KM3NeT research infrastructure is under construction in the Mediterranean Sea. It consists of two water Cherenkov neutrino detectors, ARCA and ORCA, aimed at neutrino astrophysics and oscillation research, respectively. Instrumenting a large volume of sea water with $\sim$ 6,200 optical modules comprising a total of $\sim$ 200,000 photomultiplier tubes, KM3NeT will achieve sensitivity to $\sim$ 10 MeV neutrinos from Galactic and near-Galactic core-collapse supernovae through the observation of coincident hits in photomultipliers above the background. In this paper, the sensitivity of KM3NeT to a supernova explosion is estimated from detailed analyses of background data from the first KM3NeT detection units and simulations of the neutrino signal. The KM3NeT observational horizon (for a $5\,σ$ discovery) covers essentially the Milky-Way and for the most optimistic model, extends to the Small Magellanic Cloud ($\sim$ 60 kpc). Detailed studies of the time profile of the neutrino signal allow assessment of the KM3NeT capability to determine the arrival time of the neutrino burst with a few milliseconds precision for sources up to 5$-$8 kpc away, and detecting the peculiar signature of the standing accretion shock instability if the core-collapse supernova explosion happens closer than 3$-$5 kpc, depending on the progenitor mass. KM3NeT's capability to measure the neutrino flux spectral parameters is also presented.
△ Less
Submitted 30 March, 2021; v1 submitted 11 February, 2021;
originally announced February 2021.
-
Sub-damped Lyman alpha systems in the XQ-100 survey II -- Chemical evolution at 2.4<z<4.3
Authors:
Trystyn A. M. Berg,
Michele Fumagalli,
Valentina D'Odorico,
Sara L. Ellison,
Sebastian Lopez,
George D. Becker,
Lise Christensen,
Guido Cupani,
Kelly D. Denney,
Ruben Sanchez-Ramirez,
Gabor Worseck
Abstract:
We present the measured gas-phase metal column densities in 155 sub-damped Lyman alpha systems (subDLAs) with the aim to investigate the contribution of subDLAs to the chemical evolution of the Universe. The sample was identified within the absorber-blind XQ-100 quasar spectroscopic survey over the redshift range 2.4<=z<=4.3. Using all available column densities of the ionic species investigated (…
▽ More
We present the measured gas-phase metal column densities in 155 sub-damped Lyman alpha systems (subDLAs) with the aim to investigate the contribution of subDLAs to the chemical evolution of the Universe. The sample was identified within the absorber-blind XQ-100 quasar spectroscopic survey over the redshift range 2.4<=z<=4.3. Using all available column densities of the ionic species investigated (mainly CIV, SiII, MgII, SiIV, AlII, FeII, CII, and OI; in order of decreasing detection frequency), we estimate the ionization-corrected gas-phase metallicity of each system using Markov Chain Monte Carlo techniques to explore a large grid of Cloudy ionization models. Without accounting for ionization and dust depletion effects, we find that the HI-weighted gas-phase metallicity evolution of subDLAs are consistent with damped Lyman alpha systems (DLAs). When ionization corrections are included, subDLAs are systematically more metal-poor than DLAs (between ~0.5 sigma and ~3 sigma significance) by up to ~1.0 dex over the redshift range 3<=z<=4.3. The correlation of gas-phase [Si/Fe] with metallicity in subDLAs appears to be consistent with that of DLAs, suggesting that the two classes of absorbers have a similar relative dust depletion pattern. As previously seen for Lyman limit systems, the gas-phase [C/O] in subDLAs remains constantly solar for all metallicities indicating that both subDLAs and Lyman limit systems could trace carbon-rich ejecta, potentially in circumgalactic environments.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
Worldsheet: Wrap** the World in a 3D Sheet for View Synthesis from a Single Image
Authors:
Ronghang Hu,
Nikhila Ravi,
Alexander C. Berg,
Deepak Pathak
Abstract:
We present Worldsheet, a method for novel view synthesis using just a single RGB image as input. The main insight is that simply shrink-wrap** a planar mesh sheet onto the input image, consistent with the learned intermediate depth, captures underlying geometry sufficient to generate photorealistic unseen views with large viewpoint changes. To operationalize this, we propose a novel differentiab…
▽ More
We present Worldsheet, a method for novel view synthesis using just a single RGB image as input. The main insight is that simply shrink-wrap** a planar mesh sheet onto the input image, consistent with the learned intermediate depth, captures underlying geometry sufficient to generate photorealistic unseen views with large viewpoint changes. To operationalize this, we propose a novel differentiable texture sampler that allows our wrapped mesh sheet to be textured and rendered differentiably into an image from a target viewpoint. Our approach is category-agnostic, end-to-end trainable without using any 3D supervision, and requires a single image at test time. We also explore a simple extension by stacking multiple layers of Worldsheets to better handle occlusions. Worldsheet consistently outperforms prior state-of-the-art methods on single-image view synthesis across several datasets. Furthermore, this simple idea captures novel views surprisingly well on a wide range of high-resolution in-the-wild images, converting them into navigable 3D pop-ups. Video results and code are available at https://worldsheet.github.io.
△ Less
Submitted 18 August, 2021; v1 submitted 17 December, 2020;
originally announced December 2020.
-
Fabrication of free-standing Pt nanowires for use as thermal anemometry probes in turbulence measurements
Authors:
Hai Le-The,
Christian Küchler,
Albert van den Berg,
Eberhard Bodenschatz,
Detlef Lohse,
Dominik Krug
Abstract:
We report a robust fabrication method for patterning free-standing Pt nanowires for the use as thermal anemometry probes for small-scale turbulence measurements. Using e-beam lithography, high aspect ratio Pt nanowires (~300 nm width, ~70 $μ$m length, ~100 nm thickness) were patterned on the surface of oxidized silicon (Si) wafers. Combining precise wet etching processes with dry etching processes…
▽ More
We report a robust fabrication method for patterning free-standing Pt nanowires for the use as thermal anemometry probes for small-scale turbulence measurements. Using e-beam lithography, high aspect ratio Pt nanowires (~300 nm width, ~70 $μ$m length, ~100 nm thickness) were patterned on the surface of oxidized silicon (Si) wafers. Combining precise wet etching processes with dry etching processes, these Pt nanowires have been successfully released free-standing between two silicon dioxide (SiO2) beams supported on Si cantilevers. Moreover, the unique design of the bridge holding the device allowed to release the device gently without damaging the Pt nanowires. The total fabrication time was minimized by restricting the use of e-beam lithography to the patterning of the Pt nanowires while standard photolithography was employed for other parts of the devices. We demonstrate that the fabricated sensors are suitable for turbulence measurements when operated in a constant-current mode. A robust calibration between output voltage and fluid velocity was established over the velocity range from 0.5 m s-1 to 5 m s-1 in an SF6 atmosphere at a pressure of 2 bar and a temperature of 21°C. The sensing signal from the nanowires showed negligible drift over a period of several hours. Moreover, we confirmed that the nanowires are able to withstand high dynamic pressures by testing them in air at room temperature velocities up to 55 m/s.
△ Less
Submitted 2 February, 2021; v1 submitted 30 October, 2020;
originally announced November 2020.
-
Lie-Trotter Splitting for the Nonlinear Stochastic Manakov System
Authors:
André Berg,
David Cohen,
Guillaume Dujardin
Abstract:
This article analyses the convergence of the Lie-Trotter splitting scheme for the stochastic Manakov equation, a system arising in the study of pulse propagation in randomly birefringent optical fibers. First, we prove that the strong order of the numerical approximation is 1/2 if the nonlinear term in the system is globally Lipschitz. Then, we show that the splitting scheme has convergence order…
▽ More
This article analyses the convergence of the Lie-Trotter splitting scheme for the stochastic Manakov equation, a system arising in the study of pulse propagation in randomly birefringent optical fibers. First, we prove that the strong order of the numerical approximation is 1/2 if the nonlinear term in the system is globally Lipschitz. Then, we show that the splitting scheme has convergence order 1/2 in probability and almost sure order 1/2- in the case of a cubic nonlinearity. We provide several numerical experiments illustrating the aforementioned results and the efficiency of the Lie-Trotter splitting scheme. Finally, we numerically investigate the possible blowup of solutions for some power-law nonlinearities.
△ Less
Submitted 28 October, 2020;
originally announced October 2020.
-
Improving Helium Abundance Determinations with Leo P as a Case Study
Authors:
Erik Aver,
Danielle A. Berg,
Keith A. Olive,
Richard W. Pogge,
John J. Salzer,
Evan D. Skillman
Abstract:
Currently, the primordial helium abundance is best estimated through spectroscopic observations of H II regions in metal-poor galaxies. However these determinations are limited by several systematic uncertainties which ultimately limit our ability to accurately ascertain the primordial abundance. In this study, we improve the methodologies for solving for the reddening, the emission contributions…
▽ More
Currently, the primordial helium abundance is best estimated through spectroscopic observations of H II regions in metal-poor galaxies. However these determinations are limited by several systematic uncertainties which ultimately limit our ability to accurately ascertain the primordial abundance. In this study, we improve the methodologies for solving for the reddening, the emission contributions from collisional excitation of the H I atoms, the effects underlying absorption in the H I and He I emission lines, and the treatment of the blended H I and He I emission at $λ$3889 with the aim of lowering the systematic uncertainties in helium abundance determinations. To apply these methods, we have obtained observations of the He I $λ$10830 emission line in the brightest H II region in the extremely metal-poor (3$\%$ Z$_{\odot}$) galaxy Leo P with the LUCI1 instrument on the LBT. We combine this measurement with previous MODS/LBT observations to derive an improved helium abundance. In doing so, our present analysis results in a decrease in the uncertainty in the helium abundance of Leo P by approximately 70%. This result is combined with data from other observations to estimate the primordial helium mass fraction, Y$_{p}$ $=$ 0.2453 $\pm$ 0.0034.
△ Less
Submitted 8 October, 2020;
originally announced October 2020.
-
Soft Tissue Sarcoma Co-Segmentation in Combined MRI and PET/CT Data
Authors:
Theresa Neubauer,
Maria Wimmer,
Astrid Berg,
David Major,
Dimitrios Lenis,
Thomas Beyer,
Jelena Saponjski,
Katja Bühler
Abstract:
Tumor segmentation in multimodal medical images has seen a growing trend towards deep learning based methods. Typically, studies dealing with this topic fuse multimodal image data to improve the tumor segmentation contour for a single imaging modality. However, they do not take into account that tumor characteristics are emphasized differently by each modality, which affects the tumor delineation.…
▽ More
Tumor segmentation in multimodal medical images has seen a growing trend towards deep learning based methods. Typically, studies dealing with this topic fuse multimodal image data to improve the tumor segmentation contour for a single imaging modality. However, they do not take into account that tumor characteristics are emphasized differently by each modality, which affects the tumor delineation. Thus, the tumor segmentation is modality- and task-dependent. This is especially the case for soft tissue sarcomas, where, due to necrotic tumor tissue, the segmentation differs vastly. Closing this gap, we develop a modalityspecific sarcoma segmentation model that utilizes multimodal image data to improve the tumor delineation on each individual modality. We propose a simultaneous co-segmentation method, which enables multimodal feature learning through modality-specific encoder and decoder branches, and the use of resource-effcient densely connected convolutional layers. We further conduct experiments to analyze how different input modalities and encoder-decoder fusion strategies affect the segmentation result. We demonstrate the effectiveness of our approach on public soft tissue sarcoma data, which comprises MRI (T1 and T2 sequence) and PET/CT scans. The results show that our multimodal co-segmentation model provides better modality-specific tumor segmentation than models using only the PET or MRI (T1 and T2) scan as input.
△ Less
Submitted 24 September, 2020; v1 submitted 28 August, 2020;
originally announced August 2020.
-
Fast and Accurate Modeling of Transient-State Gradient-Spoiled Sequences by Recurrent Neural Networks
Authors:
Hongyan Liu,
Oscar van der Heide,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
Fast and accurate modeling of MR signal responses are typically required for various quantitative MRI applications, such as MR Fingerprinting and MR-STAT. This work uses a new EPG-Bloch model for accurate simulation of transient-state gradient-spoiled MR sequences, and proposes a Recurrent Neural Network (RNN) as a fast surrogate of the EPG-Bloch model for computing large-scale MR signals and deri…
▽ More
Fast and accurate modeling of MR signal responses are typically required for various quantitative MRI applications, such as MR Fingerprinting and MR-STAT. This work uses a new EPG-Bloch model for accurate simulation of transient-state gradient-spoiled MR sequences, and proposes a Recurrent Neural Network (RNN) as a fast surrogate of the EPG-Bloch model for computing large-scale MR signals and derivatives. The computational efficiency of the RNN model is demonstrated by comparing with other existing models, showing one to three orders of acceleration comparing to the latest GPU-accelerated open-source EPG package. By using numerical and in-vivo brain data, two use cases, namely MRF dictionary generation and optimal experimental design, are also provided. Results show that the RNN surrogate model can be efficiently used for computing large-scale dictionaries of transient-states signals and derivatives within tens of seconds, resulting in several orders of magnitude acceleration with respect to state-of-the-art implementations. The practical application of transient-states quantitative techniques can therefore be substantially facilitated.
△ Less
Submitted 21 August, 2020; v1 submitted 17 August, 2020;
originally announced August 2020.
-
Deep-sea deployment of the KM3NeT neutrino telescope detection units by self-unrolling
Authors:
The KM3NeT Collaboration,
S. Aiello,
A. Albert,
S. Alves Garre,
Z. Aly,
F. Ameli,
E. G. Anassontzis,
M. Andre,
G. Androulakis,
M. Anghinolfi,
M. Anguita,
G. Anton,
M. Ardid,
J. Aublin,
C. Bagatelas,
R. Bakker,
G. Barbarino,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
E. Berbeen,
A. M. van den Berg,
V. Bertin,
S. Biagi,
M. Billault
, et al. (230 additional authors not shown)
Abstract:
KM3NeT is a research infrastructure being installed in the deep Mediterranean Sea. It will house a neutrino telescope comprising hundreds of networked moorings - detection units or strings equipped with optical instrumentation to detect the Cherenkov radiation generated by charged particles from neutrino-induced collisions in its vicinity. In comparison to moorings typically used for oceanography,…
▽ More
KM3NeT is a research infrastructure being installed in the deep Mediterranean Sea. It will house a neutrino telescope comprising hundreds of networked moorings - detection units or strings equipped with optical instrumentation to detect the Cherenkov radiation generated by charged particles from neutrino-induced collisions in its vicinity. In comparison to moorings typically used for oceanography, several key features of the KM3NeT string are different: the instrumentation is contained in transparent and thus unprotected glass spheres; two thin Dyneema ropes are used as strength members; and a thin delicate backbone tube with fibre-optics and copper wires for data and power transmission, respectively, runs along the full length of the mooring. Also, compared to other neutrino telescopes such as ANTARES in the Mediterranean Sea and GVD in Lake Baikal, the KM3NeT strings are more slender to minimise the amount of material used for support of the optical sensors. Moreover, the rate of deploying a large number of strings in a period of a few years is unprecedented. For all these reasons, for the installation of the KM3NeT strings, a custom-made, fast deployment method was designed. Despite the length of several hundreds of metres, the slim design of the string allows it to be compacted into a small, re-usable spherical launching vehicle instead of deploying the mooring weight down from a surface vessel. After being lowered to the seafloor, the string unfurls to its full length with the buoyant launching vehicle rolling along the two ropes.The design of the vehicle, the loading with a string, and its underwater self-unrolling are detailed in this paper.
△ Less
Submitted 31 July, 2020;
originally announced July 2020.
-
Magnetic Charge Propagation upon a 3D Artificial Spin-ice
Authors:
Andrew May,
Michael Saccone,
Arjen van den Berg,
Joseph Askey,
Matthew Hunt,
Sam Ladak
Abstract:
Magnetic charge propagation in bulk frustrated materials has yielded a paradigm-shift in science, allowing the symmetry between electricity and magnetism to be studied. Recent work is now suggesting magnetic charge dynamics upon the spin-ice surface may have important implications in determining the ordering and associated phase space. Here we detail a 3D artificial spin-ice, a 3D nanostructured a…
▽ More
Magnetic charge propagation in bulk frustrated materials has yielded a paradigm-shift in science, allowing the symmetry between electricity and magnetism to be studied. Recent work is now suggesting magnetic charge dynamics upon the spin-ice surface may have important implications in determining the ordering and associated phase space. Here we detail a 3D artificial spin-ice, a 3D nanostructured array of magnetic islands which captures the exact geometry of bulk systems, allowing field-driven dynamics of magnetic charge to be directly visualized upon the surface. Using magnetic microscopy, we observe vastly different magnetic charge dynamics along two principle directions. These striking differences are found to be due to the surface-termination and associated coordination which yields different energetics and interaction strengths for magnetic charges upon the surface.
△ Less
Submitted 6 January, 2021; v1 submitted 15 July, 2020;
originally announced July 2020.
-
Domain aware medical image classifier interpretation by counterfactual impact analysis
Authors:
Dimitrios Lenis,
David Major,
Maria Wimmer,
Astrid Berg,
Gert Sluiter,
Katja Bühler
Abstract:
The success of machine learning methods for computer vision tasks has driven a surge in computer assisted prediction for medicine and biology. Based on a data-driven relationship between input image and pathological classification, these predictors deliver unprecedented accuracy. Yet, the numerous approaches trying to explain the causality of this learned relationship have fallen short: time const…
▽ More
The success of machine learning methods for computer vision tasks has driven a surge in computer assisted prediction for medicine and biology. Based on a data-driven relationship between input image and pathological classification, these predictors deliver unprecedented accuracy. Yet, the numerous approaches trying to explain the causality of this learned relationship have fallen short: time constraints, coarse, diffuse and at times misleading results, caused by the employment of heuristic techniques like Gaussian noise and blurring, have hindered their clinical adoption.
In this work, we discuss and overcome these obstacles by introducing a neural-network based attribution method, applicable to any trained predictor. Our solution identifies salient regions of an input image in a single forward-pass by measuring the effect of local image-perturbations on a predictor's score. We replace heuristic techniques with a strong neighborhood conditioned inpainting approach, avoiding anatomically implausible, hence adversarial artifacts. We evaluate on public mammography data and compare against existing state-of-the-art methods. Furthermore, we exemplify the approach's generalizability by demonstrating results on chest X-rays. Our solution shows, both quantitatively and qualitatively, a significant reduction of localization ambiguity and clearer conveying results, without sacrificing time efficiency.
△ Less
Submitted 1 October, 2020; v1 submitted 13 July, 2020;
originally announced July 2020.
-
Technical feasibility of Magnetic Resonance Fingerprinting on a 1.5T MRI-Linac
Authors:
T. Bruijnen,
O. van der Heide,
M. P. W. Intven,
S. Mook,
J. J. W. Lagendijk,
C. A. T. van den Berg,
R. H. N. Tijssen
Abstract:
Hybrid MRI-linac (MRL) systems enable daily multiparametric quantitative MRI to assess tumor response to radiotherapy. Magnetic Resonance Fingerprinting (MRF) may provide time efficient means of rapid multiparametric quantitative MRI. The accuracy of MRF, however, relies on adequate control over system imperfections, such as eddy currents and B1+, which are different and not as well established on…
▽ More
Hybrid MRI-linac (MRL) systems enable daily multiparametric quantitative MRI to assess tumor response to radiotherapy. Magnetic Resonance Fingerprinting (MRF) may provide time efficient means of rapid multiparametric quantitative MRI. The accuracy of MRF, however, relies on adequate control over system imperfections, such as eddy currents and B1+, which are different and not as well established on MRL systems compared to diagnostic systems. In this study we investigate the technical feasibility of gradient spoiled 2D MRF on a 1.5T MRL. We show with phantom experiments that the MRL generates reliable MRF signals that are temporally stable during the day and have good agreement with spin-echo reference measurements. Subsequent in-vivo MRF scans in healthy volunteers and a patient with a colorectal liver metastasis showed good image quality, where the quantitative values of selected organs corresponded with the values reported in literature. Therefore we conclude that gradient spoiled 2D MRF is feasible on a 1.5T MRL with similar performance as on a diagnostic system. The precision and accuracy of the parametric maps are sufficient for further investigation of the clinical utility of MRF for online quantitatively MRI-guided radiotherapy.
△ Less
Submitted 13 July, 2020;
originally announced July 2020.
-
Non-rigid 3D motion estimation at high temporal resolution from prospectively undersampled k-space data using low-rank MR-MOTUS
Authors:
Niek R. F. Huttinga,
Tom Bruijnen,
Cornelis A. T. van den Berg,
Alessandro Sbrizzi
Abstract:
With the recent introduction of the MR-LINAC, an MR-scanner combined with a radiotherapy LINAC, MR-based motion estimation has become of increasing interest to (retrospectively) characterize tumor and organs-at-risk motion during radiotherapy. To this extent, we introduce low-rank MR-MOTUS, a framework to retrospectively reconstruct time-resolved non-rigid 3D+t motion-fields from a single low-reso…
▽ More
With the recent introduction of the MR-LINAC, an MR-scanner combined with a radiotherapy LINAC, MR-based motion estimation has become of increasing interest to (retrospectively) characterize tumor and organs-at-risk motion during radiotherapy. To this extent, we introduce low-rank MR-MOTUS, a framework to retrospectively reconstruct time-resolved non-rigid 3D+t motion-fields from a single low-resolution reference image and prospectively undersampled k-space data acquired during motion. Low-rank MR-MOTUS exploits spatio-temporal correlations in internal body motion with a low-rank motion model, and inverts a signal model that relates motion-fields directly to a reference image and k-space data. The low-rank model reduces the degrees-of-freedom, memory consumption and reconstruction times by assuming a factorization of space-time motion-fields in spatial and temporal components. Low-rank MR-MOTUS was employed to estimate motion in 2D/3D abdominothoracic scans and 3D head scans. Data were acquired using golden-ratio radial readouts. Reconstructed 2D and 3D respiratory motion-fields were respectively validated against time-resolved and respiratory-resolved image reconstructions, and the head motion against static image reconstructions from fully-sampled data acquired right before and right after the motion. Results show that 2D+t respiratory motion can be estimated retrospectively at 40.8 motion-fields-per-second, 3D+t respiratory motion at 7.6 motion-fields-per-second and 3D+t head-neck motion at 9.3 motion-fields-per-second. The validations show good consistency with image reconstructions. The proposed framework can estimate time-resolved non-rigid 3D motion-fields, which allows to characterize drifts and intra and inter-cycle patterns in breathing motion during radiotherapy, and could form the basis for real-time MR-guided radiotherapy.
△ Less
Submitted 1 July, 2020;
originally announced July 2020.
-
Similarity Search for Efficient Active Learning and Search of Rare Concepts
Authors:
Cody Coleman,
Edward Chou,
Julian Katz-Samuels,
Sean Culatana,
Peter Bailis,
Alexander C. Berg,
Robert Nowak,
Roshan Sumbaly,
Matei Zaharia,
I. Zeki Yalniz
Abstract:
Many active learning and search approaches are intractable for large-scale industrial settings with billions of unlabeled examples. Existing approaches search globally for the optimal examples to label, scaling linearly or even quadratically with the unlabeled data. In this paper, we improve the computational efficiency of active learning and search methods by restricting the candidate pool for la…
▽ More
Many active learning and search approaches are intractable for large-scale industrial settings with billions of unlabeled examples. Existing approaches search globally for the optimal examples to label, scaling linearly or even quadratically with the unlabeled data. In this paper, we improve the computational efficiency of active learning and search methods by restricting the candidate pool for labeling to the nearest neighbors of the currently labeled set instead of scanning over all of the unlabeled data. We evaluate several selection strategies in this setting on three large-scale computer vision datasets: ImageNet, OpenImages, and a de-identified and aggregated dataset of 10 billion images provided by a large internet company. Our approach achieved similar mean average precision and recall as the traditional global approach while reducing the computational cost of selection by up to three orders of magnitude, thus enabling web-scale active learning.
△ Less
Submitted 22 July, 2021; v1 submitted 30 June, 2020;
originally announced July 2020.
-
Deep Ordinal Regression with Label Diversity
Authors:
Axel Berg,
Magnus Oskarsson,
Mark O'Connor
Abstract:
Regression via classification (RvC) is a common method used for regression problems in deep learning, where the target variable belongs to a set of continuous values. By discretizing the target into a set of non-overlap** classes, it has been shown that training a classifier can improve neural network accuracy compared to using a standard regression approach. However, it is not clear how the set…
▽ More
Regression via classification (RvC) is a common method used for regression problems in deep learning, where the target variable belongs to a set of continuous values. By discretizing the target into a set of non-overlap** classes, it has been shown that training a classifier can improve neural network accuracy compared to using a standard regression approach. However, it is not clear how the set of discrete classes should be chosen and how it affects the overall solution. In this work, we propose that using several discrete data representations simultaneously can improve neural network learning compared to a single representation. Our approach is end-to-end differentiable and can be added as a simple extension to conventional learning methods, such as deep neural networks. We test our method on three challenging tasks and show that our method reduces the prediction error compared to a baseline RvC approach while maintaining a similar model complexity.
△ Less
Submitted 29 June, 2020;
originally announced June 2020.
-
Silicon crystals for steering of high-intensity particle beams at ultra-high energy accelerators
Authors:
A. Mazzolari,
M. Romagnoni,
E. Bagli,
L. Bandiera,
S. Baricordi,
R. Camattari,
D. Casotti,
M. Tamisari,
A. Sytov,
V. Guidi,
G. Cavoto,
S. Carturan,
D. De Salvador,
A. Balbo,
G. Cruciani,
Thu Nhi Trans,
R. Verbeni,
N. Pastrone,
L. Lanzoni,
A. Rossall,
J. A. van den Berg,
R. Jenkins,
P. Dumas
Abstract:
Experimental results and simulation models show that crystals might play a relevant role for the development of new generations of high-energy and high-intensity particle accelerators and might disclose innovative possibilities at existing ones. In this paper we describe the most advanced manufacturing techniques of crystals suitable for operations at ultra-high energy and ultra-high intensity par…
▽ More
Experimental results and simulation models show that crystals might play a relevant role for the development of new generations of high-energy and high-intensity particle accelerators and might disclose innovative possibilities at existing ones. In this paper we describe the most advanced manufacturing techniques of crystals suitable for operations at ultra-high energy and ultra-high intensity particle accelerators, reporting as an example of potential applications the collimation of the particle beams circulating in the Large Hadron Collider at CERN, which will be upgraded through the addition of bent crystals in the frame of the High Luminosity Large Hadron Collider project.
△ Less
Submitted 28 June, 2020;
originally announced June 2020.
-
Exploiting femtosecond laser exposure for additive and subtractive fabrication of functional materials: A Route to designer 3D Magnetic Nanostructures
Authors:
Arjen van den Berg,
Mylene Caruel,
Matthew Hunt,
Sam Ladak
Abstract:
Three-dimensional nanostructured functional materials are important systems, allowing new means to intricately control electromagnetic properties. A key problem is realising a 3D printing methodology upon the nanoscale that can yield a range of functional materials. In this letter, it is shown that two-photon lithography when combined with femtosecond machining of sacrificial layers, can be used t…
▽ More
Three-dimensional nanostructured functional materials are important systems, allowing new means to intricately control electromagnetic properties. A key problem is realising a 3D printing methodology upon the nanoscale that can yield a range of functional materials. In this letter, it is shown that two-photon lithography when combined with femtosecond machining of sacrificial layers, can be used to realise such a vision and produce 3D functional nanomaterials of complex geometry. This is demonstrated by fabricating 3D magnetic nanowires that exhibit controlled domain wall injection and propagation. Secondly, we fabricate large scale 3D artificial spin-ice structures whose complex switching can be probed using optical magnetometry. We show that by careful analysis of the magneto-optical Kerr effect signal and by comparison with micro-magnetic simulations, depth dependent switching information can be obtained from the 3DASI lattice. The work paves the way to new materials, which exploit additional physics provided by non-trivial 3D geometries.
△ Less
Submitted 28 October, 2021; v1 submitted 29 May, 2020;
originally announced May 2020.
-
Exponential integrators for the stochastic Manakov equation
Authors:
André Berg,
David Cohen,
Guillaume Dujardin
Abstract:
This article presents and analyses an exponential integrator for the stochastic Manakov equation, a system arising in the study of pulse propagation in randomly birefringent optical fibers. We first prove that the strong order of the numerical approximation is $1/2$ if the nonlinear term in the system is globally Lipschitz-continuous. Then, we use this fact to prove that the exponential integrator…
▽ More
This article presents and analyses an exponential integrator for the stochastic Manakov equation, a system arising in the study of pulse propagation in randomly birefringent optical fibers. We first prove that the strong order of the numerical approximation is $1/2$ if the nonlinear term in the system is globally Lipschitz-continuous. Then, we use this fact to prove that the exponential integrator has convergence order $1/2$ in probability and almost sure order $1/2$, in the case of the cubic nonlinear coupling which is relevant in optical fibers. Finally, we present several numerical experiments in order to support our theoretical findings and to illustrate the efficiency of the exponential integrator as well as a modified version of it.
△ Less
Submitted 11 May, 2020;
originally announced May 2020.
-
Trajectory Deflection of Spinning Magnetic Microparticles, the Magnus Effect at the Microscale
Authors:
M. Solsona,
H. Keizer,
H. de Boer,
Y. P. Klein,
W. Olthuis,
L. Abelmann,
A. van den Berg
Abstract:
The deflection due to the Magnus force of magnetic particles with a diameter of 80 micrometer drop** through fluids and rotating in a magnetic field was measured. With Reynolds number for this experiment around 1, we found trajectory deflections of the order of 1 degree, in agreement within measurement error with theory. This method holds promise for the sorting and analysis of the distribution…
▽ More
The deflection due to the Magnus force of magnetic particles with a diameter of 80 micrometer drop** through fluids and rotating in a magnetic field was measured. With Reynolds number for this experiment around 1, we found trajectory deflections of the order of 1 degree, in agreement within measurement error with theory. This method holds promise for the sorting and analysis of the distribution in magnetic moment and particle diameter of suspensions of microparticles, such as applied in catalysis, or objects loaded with magnetic particles.
△ Less
Submitted 29 April, 2020;
originally announced April 2020.
-
A technique for the study of (p,n) reactions with unstable isotopes at energies relevant to astrophysics
Authors:
P. Gastis,
G. Perdikakis,
G. P. A. Berg,
A. C. Dombos,
A. Estrade,
A. Falduto,
M. Horoi,
S. N. Liddick,
S. Lipschutz,
S. Lyons,
F. Montes,
A. Palmisano,
J. Pereira,
J. S. Randhawa,
T. Redpath,
M. Redshaw,
J. Schmitt,
J. R. Sheehan,
M. K. Smith,
P. Tsintari,
A. C. C. Villari,
K. Wang,
R. G. T. Zegers
Abstract:
We have developed and tested an experimental technique for the measurement of low-energy (p,n) reactions in inverse kinematics relevant to nuclear astrophysics. The proposed setup is located at the ReA3 facility at the National Superconducting Cyclotron Laboratory. In the current approach, we operate the beam-transport line in ReA3 as a recoil separator while tagging the outgoing neutrons from the…
▽ More
We have developed and tested an experimental technique for the measurement of low-energy (p,n) reactions in inverse kinematics relevant to nuclear astrophysics. The proposed setup is located at the ReA3 facility at the National Superconducting Cyclotron Laboratory. In the current approach, we operate the beam-transport line in ReA3 as a recoil separator while tagging the outgoing neutrons from the (p,n) reactions with the low-energy neutron detector array (LENDA). The developed technique was verified by using the $^{40}$Ar(p,n)$^{40}$K reaction as a probe. The results of the proof-of-principle experiment with the $^{40}$Ar beam show that cross-section measurements within an uncertainty of $\sim$25\% are feasible with count rates up to 7 counts/mb/pnA/s. In this article, we give a detailed description of the experimental setup, and present the analysis method and results from the test experiment. Future plans on using the technique in experiments with the separator for capture reactions (SECAR) that is currently being commissioned are also discussed.
△ Less
Submitted 16 July, 2020; v1 submitted 27 April, 2020;
originally announced April 2020.
-
CHAOS V: Recombination Line Carbon Abundances in M101
Authors:
Evan D. Skillman,
Danielle A. Berg,
Richard W. Pogge,
John Moustakas,
Noah S. J. Rogers,
Kevin V. Croxall
Abstract:
The CHAOS project is building a large database of LBT H II region spectra in nearby spiral galaxies to use direct abundances to better determine the dispersion in metallicity as a function of galactic radius. Here, we present CHAOS LBT observations of C II $λ$4267 emission detected in 10 H II regions in M 101, and, using a new photoionization model based ionization correction factor, we convert th…
▽ More
The CHAOS project is building a large database of LBT H II region spectra in nearby spiral galaxies to use direct abundances to better determine the dispersion in metallicity as a function of galactic radius. Here, we present CHAOS LBT observations of C II $λ$4267 emission detected in 10 H II regions in M 101, and, using a new photoionization model based ionization correction factor, we convert these measurements into total carbon abundances. A comparison with M101 C II recombination line observations from the literature shows excellent agreement, and we measure a relatively steep gradient in log(C/H) of -0.37 +/- 0.06 dex/R_e. The C/N observations are consistent with a constant value of log(C/N) = 0.84 with a dispersion of only 0.09 dex, which, given the different nucleosynthetic sources of C and N, is challenging to understand. We also note that when plotting N/O versus O/H, all of the H II regions with detections of CII $λ$4267 present N/O abundances at the minimum of the scatter in N/O at a given value of O/H. If the high surface brightness necessary for the detection of the faint recombination lines is interpreted as an indicator of H II region youth, then this may point to a lack of nitrogen pollution in the youngest H II regions. In the future, we anticipate that the CHAOS project will significantly increase the total number of C II $λ$4267 measurements in extragalactic H II regions.
△ Less
Submitted 22 April, 2020;
originally announced April 2020.
-
Event reconstruction for KM3NeT/ORCA using convolutional neural networks
Authors:
Sebastiano Aiello,
Arnauld Albert,
Sergio Alves Garre,
Zineb Aly,
Fabrizio Ameli,
Michel Andre,
Giorgos Androulakis,
Marco Anghinolfi,
Mancia Anguita,
Gisela Anton,
Miquel Ardid,
Julien Aublin,
Christos Bagatelas,
Giancarlo Barbarino,
Bruny Baret,
Suzan Basegmez du Pree,
Meriem Bendahman,
Edward Berbee,
Vincent Bertin,
Simone Biagi,
Andrea Biagioni,
Matthias Bissinger,
Markus Boettcher,
Jihad Boumaaza,
Mohammed Bouta
, et al. (207 additional authors not shown)
Abstract:
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neur…
▽ More
The KM3NeT research infrastructure is currently under construction at two locations in the Mediterranean Sea. The KM3NeT/ORCA water-Cherenkov neutrino detector off the French coast will instrument several megatons of seawater with photosensors. Its main objective is the determination of the neutrino mass ordering. This work aims at demonstrating the general applicability of deep convolutional neural networks to neutrino telescopes, using simulated datasets for the KM3NeT/ORCA detector as an example. To this end, the networks are employed to achieve reconstruction and classification tasks that constitute an alternative to the analysis pipeline presented for KM3NeT/ORCA in the KM3NeT Letter of Intent. They are used to infer event reconstruction estimates for the energy, the direction, and the interaction point of incident neutrinos. The spatial distribution of Cherenkov light generated by charged particles induced in neutrino interactions is classified as shower- or track-like, and the main background processes associated with the detection of atmospheric neutrinos are recognized. Performance comparisons to machine-learning classification and maximum-likelihood reconstruction algorithms previously developed for KM3NeT/ORCA are provided. It is shown that this application of deep convolutional neural networks to simulated datasets for a large-volume neutrino telescope yields competitive reconstruction results and performance improvements with respect to classical approaches.
△ Less
Submitted 17 April, 2020;
originally announced April 2020.
-
Deep-learning enhancement of large scale numerical simulations
Authors:
Caspar van Leeuwen,
Damian Podareanu,
Valeriu Codreanu,
Maxwell X. Cai,
Axel Berg,
Simon Portegies Zwart,
Robin Stoffer,
Menno Veerman,
Chiel van Heerwaarden,
Sydney Otten,
Sascha Caron,
Cunliang Geng,
Francesco Ambrosetti,
Alexandre M. J. J. Bonvin
Abstract:
Traditional simulations on High-Performance Computing (HPC) systems typically involve modeling very large domains and/or very complex equations. HPC systems allow running large models, but limits in performance increase that have become more prominent in the last 5-10 years will likely be experienced. Therefore new approaches are needed to increase application performance. Deep learning appears to…
▽ More
Traditional simulations on High-Performance Computing (HPC) systems typically involve modeling very large domains and/or very complex equations. HPC systems allow running large models, but limits in performance increase that have become more prominent in the last 5-10 years will likely be experienced. Therefore new approaches are needed to increase application performance. Deep learning appears to be a promising way to achieve this. Recently deep learning has been employed to enhance solving problems that traditionally are solved with large-scale numerical simulations using HPC. This type of application, deep learning for high-performance computing, is the theme of this whitepaper. Our goal is to provide concrete guidelines to scientists and others that would like to explore opportunities for applying deep learning approaches in their own large-scale numerical simulations. These guidelines have been extracted from a number of experiments that have been undertaken in various scientific domains over the last two years, and which are described in more detail in the Appendix. Additionally, we share the most important lessons that we have learned.
△ Less
Submitted 30 March, 2020;
originally announced April 2020.
-
LU-Net: a multi-task network to improve the robustness of segmentation of left ventriclular structures by deep learning in 2D echocardiography
Authors:
Sarah Leclerc,
Erik Smistad,
Andreas Østvik,
Frederic Cervenansky,
Florian Espinosa,
Torvald Espeland,
Erik Andreas Rye Berg,
Thomas Grenier,
Carole Lartizien,
Pierre-Marc Jodoin,
Lasse Lovstakken,
Olivier Bernard
Abstract:
Segmentation of cardiac structures is one of the fundamental steps to estimate volumetric indices of the heart. This step is still performed semi-automatically in clinical routine, and is thus prone to inter- and intra-observer variability. Recent studies have shown that deep learning has the potential to perform fully automatic segmentation. However, the current best solutions still suffer from a…
▽ More
Segmentation of cardiac structures is one of the fundamental steps to estimate volumetric indices of the heart. This step is still performed semi-automatically in clinical routine, and is thus prone to inter- and intra-observer variability. Recent studies have shown that deep learning has the potential to perform fully automatic segmentation. However, the current best solutions still suffer from a lack of robustness. In this work, we introduce an end-to-end multi-task network designed to improve the overall accuracy of cardiac segmentation while enhancing the estimation of clinical indices and reducing the number of outliers. Results obtained on a large open access dataset show that our method outperforms the current best performing deep learning solution and achieved an overall segmentation accuracy lower than the intra-observer variability for the epicardial border (i.e. on average a mean absolute error of 1.5mm and a Hausdorff distance of 5.1mm) with 11% of outliers. Moreover, we demonstrate that our method can closely reproduce the expert analysis for the end-diastolic and end-systolic left ventricular volumes, with a mean correlation of 0.96 and a mean absolute error of 7.6ml. Concerning the ejection fraction of the left ventricle, results are more contrasted with a mean correlation coefficient of 0.83 and an absolute mean error of 5.0%, producing scores that are slightly below the intra-observer margin. Based on this observation, areas for improvement are suggested.
△ Less
Submitted 4 April, 2020;
originally announced April 2020.
-
Interpreting Medical Image Classifiers by Optimization Based Counterfactual Impact Analysis
Authors:
David Major,
Dimitrios Lenis,
Maria Wimmer,
Gert Sluiter,
Astrid Berg,
Katja Bühler
Abstract:
Clinical applicability of automated decision support systems depends on a robust, well-understood classification interpretation. Artificial neural networks while achieving class-leading scores fall short in this regard. Therefore, numerous approaches have been proposed that map a salient region of an image to a diagnostic classification. Utilizing heuristic methodology, like blurring and noise, th…
▽ More
Clinical applicability of automated decision support systems depends on a robust, well-understood classification interpretation. Artificial neural networks while achieving class-leading scores fall short in this regard. Therefore, numerous approaches have been proposed that map a salient region of an image to a diagnostic classification. Utilizing heuristic methodology, like blurring and noise, they tend to produce diffuse, sometimes misleading results, hindering their general adoption. In this work we overcome these issues by presenting a model agnostic saliency map** framework tailored to medical imaging. We replace heuristic techniques with a strong neighborhood conditioned inpainting approach, which avoids anatomically implausible artefacts. We formulate saliency attribution as a map-quality optimization task, enforcing constrained and focused attributions. Experiments on public mammography data show quantitatively and qualitatively more precise localization and clearer conveying results than existing state-of-the-art methods.
△ Less
Submitted 3 April, 2020;
originally announced April 2020.
-
gSeaGen: the KM3NeT GENIE-based code for neutrino telescopes
Authors:
Sebastiano Aiello,
Arnauld Albert,
Sergio Alves Garre,
Zineb Aly,
Fabrizio Ameli,
Michel Andre,
Giorgos Androulakis,
Marco Anghinolfi,
Mancia Anguita,
Gisela Anton,
Miquel Ardid,
Julien Aublin,
Christos Bagatelas,
Giancarlo Barbarino,
Bruny Baret,
Suzan Basegmez du Pree,
Meriem Bendahman,
Edward Berbee,
Vincent Bertin,
Simone Biagi,
Andrea Biagioni,
Matthias Bissinger,
Markus Boettcher,
Jihad Boumaaza,
Simon Bourret
, et al. (211 additional authors not shown)
Abstract:
The gSeaGen code is a GENIE-based application developed to efficiently generate high statistics samples of events, induced by neutrino interactions, detectable in a neutrino telescope. The gSeaGen code is able to generate events induced by all neutrino flavours, considering topological differences between track-type and shower-like events. Neutrino interactions are simulated taking into account th…
▽ More
The gSeaGen code is a GENIE-based application developed to efficiently generate high statistics samples of events, induced by neutrino interactions, detectable in a neutrino telescope. The gSeaGen code is able to generate events induced by all neutrino flavours, considering topological differences between track-type and shower-like events. Neutrino interactions are simulated taking into account the density and the composition of the media surrounding the detector. The main features of gSeaGen are presented together with some examples of its application within the KM3NeT project.
△ Less
Submitted 31 March, 2020;
originally announced March 2020.
-
A comparison of UV and optical metallicities in star-forming galaxies
Authors:
Nell Byler,
Lisa J Kewley,
Jane R Rigby,
Ayan Acharyya,
Danielle A Berg,
Matthew Bayliss,
Keren Sharon,
.
Abstract:
Our ability to study the properties of the interstellar medium (ISM) in the earliest galaxies will rely on emission line diagnostics at rest-frame ultraviolet (UV) wavelengths. In this work, we identify metallicity-sensitive diagnostics using UV emission lines. We compare UV-derived metallicities with standard, well-established optical metallicities using a sample of galaxies with rest-frame UV an…
▽ More
Our ability to study the properties of the interstellar medium (ISM) in the earliest galaxies will rely on emission line diagnostics at rest-frame ultraviolet (UV) wavelengths. In this work, we identify metallicity-sensitive diagnostics using UV emission lines. We compare UV-derived metallicities with standard, well-established optical metallicities using a sample of galaxies with rest-frame UV and optical spectroscopy. We find that the He2-O3C3 diagnostic (He II 1640 / C III 1906,1909 vs. O III 1666 / C III 1906,1909) is a reliable metallicity tracer, particularly at low metallicity (12+log(O/H) < 8), where stellar contributions are minimal. We find that the Si3-O3C3 diagnostic (Si III 1883 / C III 1906,1909 vs. O III 1666 / C III 1906,1909) is a reliable metallicity tracer, though with large scatter (0.2-0.3 dex), which we suggest is driven by variations in gas-phase abundances. We find that the C4-O3C3 diagnostic (C IV 1548,1550 / O III 1666 vs. O III 1666 / C III 1906,1909) correlates poorly with optically-derived metallicities. We discuss possible explanations for these discrepant metallicity determinations, including the hardness of the ionizing spectrum, contribution from stellar wind emission, and non-solar-scaled gas-phase abundances. Finally, we provide two new UV oxygen abundance diagnostics, calculated from polynomial fits to the model grid surface in the He2-O3C3 and Si3-O3C3 diagrams.
△ Less
Submitted 15 March, 2020;
originally announced March 2020.
-
The Leoncino Dwarf Galaxy: Exploring the Low-Metallicity End of the Luminosity-Metallicity and Mass-Metallcity Relations
Authors:
Kristen. B. W. McQuinn,
Danielle A. Berg,
Evan D. Skillman,
Elizabeth Adams,
John M. Cannon,
Andrew E. Dolphin,
John J. Salzer,
Riccardo Giovanelli,
Martha P. Haynes,
Alec S. Hirschauer,
Steven Janoweicki,
Myles Klapkowski,
Katherine L. Rhode
Abstract:
Extremely metal-poor (XMP) galaxies are low-mass, star-forming galaxies with gas-phase oxygen abundances below 12+log(O/H) = 7.35 (~1/20 Zsun). Galaxy evolution scenarios suggest three pathways to form an XMP: (1) secular evolution at low galaxy masses, (2) slow evolution in voids, or (3) dilution of measured abundances from infall of pristine gas. The recently discovered XMP galaxy Leoncino, with…
▽ More
Extremely metal-poor (XMP) galaxies are low-mass, star-forming galaxies with gas-phase oxygen abundances below 12+log(O/H) = 7.35 (~1/20 Zsun). Galaxy evolution scenarios suggest three pathways to form an XMP: (1) secular evolution at low galaxy masses, (2) slow evolution in voids, or (3) dilution of measured abundances from infall of pristine gas. The recently discovered XMP galaxy Leoncino, with an oxygen abundance below 3% Zsun, provides an opportunity to explore these different scenarios. Using Hubble Space Telescope imaging of the resolved stellar populations of Leoncino, we measure the distance to the galaxy to be D=12.1 (+1.7/-3.4) Mpc and find that Leoncino is located in an under-dense environment. Leoncino has a compact morphology, hosts a population of young, massive stars, has a high gas-to-star mass ratio, and shows signs of interaction with a galaxy nearby on the sky, UGC 5186. Similar to nearly all XMP galaxies known in the nearby universe, Leoncino is offset from the Luminosity-Metallicity (LZ) relation. Yet, Leoncino is consistent with the stellar Mass-Metallicity (MZ) relation defined by Local Volume galaxies. Thus, our results suggest that the offset from the LZ relation is due to higher recent star formation, likely triggered by a minor interaction, while the low oxygen abundance is consistent with the expectation that low-mass galaxies will undergo secular evolution marked by inefficient star formation and metal-loss via galactic winds. This is in contrast to XMP galaxies that are outliers in both the LZ and MZ relations; in such cases, the low oxygen abundances are best explained by dilution due to the infall of pristine gas. We also discuss why quiescent XMP galaxies are underrepresented in current surveys.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Project AMIGA: The Circumgalactic Medium of Andromeda
Authors:
Nicolas Lehner,
Samantha C. Berek,
J. Christopher Howk,
Bart P. Wakker,
Jason Tumlinson,
Edward B. Jenkins,
J. Xavier Prochaska,
Ramona Augustin,
Suoqing Ji,
Claude-Andre Faucher-Giguere,
Zachary Hafen,
Molly S. Peeples,
Kat A. Barger,
Michelle A. Berg,
Rongmon Bordoloi,
Thomas M. Brown,
Andrew J. Fox,
Karoline M. Gilbert,
Puragra Guhathakurta,
Jason S. Kalirai,
Felix J. Lockman,
John M. O'Meara,
D. J. Pisano,
Joseph Ribaudo,
Jessica K. Werk
Abstract:
Project AMIGA (Absorption Maps In the Gas of Andromeda) is a large ultraviolet Hubble Space Telescope program, which has assembled a sample of 43 QSOs that pierce the circumgalactic medium (CGM) of Andromeda (M31) from R=25 to 569 kpc (25 of them probing gas from 25 kpc to about the virial radius-Rvir = 300 kpc-of M31). Our large sample provides an unparalleled look at the physical conditions and…
▽ More
Project AMIGA (Absorption Maps In the Gas of Andromeda) is a large ultraviolet Hubble Space Telescope program, which has assembled a sample of 43 QSOs that pierce the circumgalactic medium (CGM) of Andromeda (M31) from R=25 to 569 kpc (25 of them probing gas from 25 kpc to about the virial radius-Rvir = 300 kpc-of M31). Our large sample provides an unparalleled look at the physical conditions and distribution of metals in the CGM of a single galaxy using ions that probe a wide range of gas phases (Si II, Si III, Si IV, C II, C IV, and O VI, the latter being from the Far Ultraviolet Spectroscopic Explorer). We find that Si III and O VI have near unity covering factor maintained all the way out to 1.2Rvir and 1.9Rvir, respectively. We show that Si III is the dominant ion over Si II and Si IV at any R. While we do not find that the properties of the CGM of M31 depend strongly on the azimuth, we show that they change remarkably around 0.3-0.5Rvir, conveying that the inner regions of the CGM of M31 are more dynamic and have more complicated multi-phase gas-structures than at R>0.5Rvir. We estimate the metal mass of the CGM within Rvir as probed by Si II, Si III, and Si IV is 2x10^7 Msun and by O VI is >8x10^7 Msun, while the baryon mass of the 10^4-10^5.5 K gas is ~4x10^10 (Z/0.3 Zsun)^(-1) Msun within Rvir. We show that different zoom-in cosmological simulations of L* galaxies better reproduce the column density profile of O VI with R than Si III or the other studied ions. We find that observations of the M31 CGM and zoom-in simulations of L* galaxies have both lower ions showing higher column density dispersion and dependence on R than higher ions, indicating that the higher ionization structures are larger and/or more broadly distributed.
△ Less
Submitted 18 February, 2020;
originally announced February 2020.
-
Warming or cooling from a random walk process in the temperature
Authors:
Bernd Albert Berg
Abstract:
A simple 3-parameter random walk model for monthly fluctuations $\triangle T$ of a temperature $T$ is introduced. Applied to a time range of 170 years, temperature fluctuations of the model produce for about 14\% of the runs warming that exceeds the observed global warming of the earth surface temperature from 1850 to 2019. On the other hand, there is a 50\% likelihood for runs of our model result…
▽ More
A simple 3-parameter random walk model for monthly fluctuations $\triangle T$ of a temperature $T$ is introduced. Applied to a time range of 170 years, temperature fluctuations of the model produce for about 14\% of the runs warming that exceeds the observed global warming of the earth surface temperature from 1850 to 2019. On the other hand, there is a 50\% likelihood for runs of our model resulting in cooling. If a similar random walk process can be used as an effective model for fluctuations of the global earth surface temperature, effects due to internal and external forcing could be considerably over- or underestimated.
△ Less
Submitted 1 February, 2020;
originally announced February 2020.
-
CHAOS IV: Gas-Phase Abundance Trends From The First Four CHAOS Galaxies
Authors:
Danielle A. Berg,
Richard W. Pogge,
Evan D. Skillman,
Kevin V. Croxall,
John Moustakas,
Noah S. J. Rogers,
Jiayi Sun
Abstract:
The chemical abundances of spiral galaxies, as probed by HII regions across their disks, are key to understanding the evolution of galaxies over a wide range of environments. We present LBT/MODS spectra of 52 HII regions in NGC3184 as part of the CHemical Abundances Of Spirals (CHAOS) project. We explore the direct-method gas-phase abundance trends for the first four CHAOS galaxies, using temperat…
▽ More
The chemical abundances of spiral galaxies, as probed by HII regions across their disks, are key to understanding the evolution of galaxies over a wide range of environments. We present LBT/MODS spectra of 52 HII regions in NGC3184 as part of the CHemical Abundances Of Spirals (CHAOS) project. We explore the direct-method gas-phase abundance trends for the first four CHAOS galaxies, using temperature measurements from one or more auroral line detections in 190 individual HII regions. We find the dispersion in Te-Te relationships is dependent on ionization, as characterized by F_5007/F_3727, and so recommend ionization-based temperature priorities for abundance calculations. We confirm our previous results that [NII] and [SIII] provide the most robust measures of electron temperature in low-ionization zones, while [OIII] provides reliable electron temperatures in high-ionization nebula. We measure relative and absolute abundances for O, N, S, Ar, and Ne. The four CHAOS galaxies marginally conform with a universal O/H gradient, as found by empirical IFU studies when plotted relative to effective radius. However, after adjusting for vertical offsets, we find a tight universal N/O gradient of alpha_N/O = -0.33 dex/Re with sigma_tot. = 0.08 for Rg/Re < 2.0, where N is dominated by secondary production. Despite this tight universal N/O gradient, the scatter in the N/O-O/H relationship is significant. Interestingly, the scatter is similar when N/O is plotted relative to O/H or S/H. The observable ionic states of S probe lower ionization and excitation energies than O, which might be more appropriate for characterizing abundances in metal-rich HII regions.
△ Less
Submitted 14 January, 2020;
originally announced January 2020.
-
CBCT-to-CT synthesis with a single neural network for head-and-neck, lung and breast cancer adaptive radiotherapy
Authors:
Matteo Maspero,
Mark HF Savenije,
Tristan CF van Heijst,
Joost JC Verhoeff,
Alexis NTJ Kotte,
Anette C Houweling,
Cornelis AT van den Berg
Abstract:
Purpose: CBCT-based adaptive radiotherapy requires daily images for accurate dose calculations. This study investigates the feasibility of applying a single convolutional network to facilitate CBCT-to-CT synthesis for head-and-neck, lung, and breast cancer patients. Methods: Ninety-nine patients diagnosed with head-and-neck, lung or breast cancer undergoing radiotherapy with CBCT-based position ve…
▽ More
Purpose: CBCT-based adaptive radiotherapy requires daily images for accurate dose calculations. This study investigates the feasibility of applying a single convolutional network to facilitate CBCT-to-CT synthesis for head-and-neck, lung, and breast cancer patients. Methods: Ninety-nine patients diagnosed with head-and-neck, lung or breast cancer undergoing radiotherapy with CBCT-based position verification were included in this study. CBCTs were registered to planning CTs according to clinical procedures. Three cycle-consistent generative adversarial networks (cycle-GANs) were trained in an unpaired manner on 15 patients per anatomical site generating synthetic-CTs (sCTs). Another network was trained with all the anatomical sites together. Performances of all four networks were compared and evaluated for image similarity against rescan CT (rCT). Clinical plans were recalculated on CT and sCT and analysed through voxel-based dose differences and γ-analysis. Results: A sCT was generated in 10 seconds. Image similarity was comparable between models trained on different anatomical sites and a single model for all sites. Mean dose differences < 0.5% were obtained in high-dose regions. Mean gamma (2%,2mm) pass-rates > 95% were achieved for all sites. Conclusions: Cycle-GAN reduced CBCT artefacts and increased HU similarity to CT, enabling sCT-based dose calculations. The speed of the network can facilitate on-line adaptive radiotherapy using a single network for head-and-neck, lung and breast cancer patients.
△ Less
Submitted 23 December, 2019;
originally announced December 2019.
-
The Control Unit of the KM3NeT Data Acquisition System
Authors:
S. Aiello,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. Aublin,
C. Bagatelas,
G. Barbarino,
B. Baret,
S. Basegmez du Pree,
M. Bendahman,
E. Berbee,
A. M. van den Berg,
V. Bertin,
S. Biagi,
A. Biagioni,
M. Bissinger,
J. Boumaaza,
S. Bourret,
M. Bouta,
G. Bouvet,
M. Bouwhuis,
C. Bozza
, et al. (195 additional authors not shown)
Abstract:
The KM3NeT Collaboration runs a multi-site neutrino observatory in the Mediterranean Sea. Water Cherenkov particle detectors, deep in the sea and far off the coasts of France and Italy, are already taking data while incremental construction progresses. Data Acquisition Control software is operating off-shore detectors as well as testing and qualification stations for their components. The software…
▽ More
The KM3NeT Collaboration runs a multi-site neutrino observatory in the Mediterranean Sea. Water Cherenkov particle detectors, deep in the sea and far off the coasts of France and Italy, are already taking data while incremental construction progresses. Data Acquisition Control software is operating off-shore detectors as well as testing and qualification stations for their components. The software, named Control Unit, is highly modular. It can undergo upgrades and reconfiguration with the acquisition running. Interplay with the central database of the Collaboration is obtained in a way that allows for data taking even if Internet links fail. In order to simplify the management of computing resources in the long term, and to cope with possible hardware failures of one or more computers, the KM3NeT Control Unit software features a custom dynamic resource provisioning and failover technology, which is especially important for ensuring continuity in case of rare transient events in multi-messenger astronomy. The software architecture relies on ubiquitous tools and broadly adopted technologies and has been successfully tested on several operating systems.
△ Less
Submitted 30 September, 2019;
originally announced October 2019.
-
The Pierre Auger Observatory: Contributions to the 36th International Cosmic Ray Conference (ICRC 2019)
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. F. M. Albuquerque,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
S. Baur,
K. H. Becker
, et al. (361 additional authors not shown)
Abstract:
Contributions of the Pierre Auger Collaboration to the 36th International Cosmic Ray Conference (ICRC 2019), 24 July - 1 August 2019, Madison, Wisconsin, USA.
Contributions of the Pierre Auger Collaboration to the 36th International Cosmic Ray Conference (ICRC 2019), 24 July - 1 August 2019, Madison, Wisconsin, USA.
△ Less
Submitted 19 September, 2019;
originally announced September 2019.
-
Thermal evolution of rocky exoplanets with a graphite outer shell
Authors:
Kaustubh Hakim,
Arie van den Berg,
Allona Vazan,
Dennis Höning,
Wim van Westrenen,
Carsten Dominik
Abstract:
The presence of rocky exoplanets with a large refractory carbon inventory is predicted by chemical evolution models of protoplanetary disks of stars with photospheric C/O >0.65, and by models studying the radial transport of refractory carbon. High-pressure high-temperature laboratory experiments show that most of the carbon in these exoplanets differentiates into a graphite outer shell. Our aim i…
▽ More
The presence of rocky exoplanets with a large refractory carbon inventory is predicted by chemical evolution models of protoplanetary disks of stars with photospheric C/O >0.65, and by models studying the radial transport of refractory carbon. High-pressure high-temperature laboratory experiments show that most of the carbon in these exoplanets differentiates into a graphite outer shell. Our aim is to evaluate the effects of a graphite outer shell on the thermal evolution of rocky exoplanets containing a metallic core and a silicate mantle. We implement a parameterized model of mantle convection to determine the thermal evolution of rocky exoplanets with graphite layer thicknesses up to 1000 km. We find that, due to the high thermal conductivity of graphite, conduction is the dominant heat transport mechanism in a graphite layer for the long-term evolution (>200 Myr). The conductive graphite shell essentially behaves like a stagnant lid with a fixed thickness. Models of Kepler-37b (Mercury-size) and a Mars-sized exoplanet show that a planet with a graphite lid cools faster than a planet with a silicate lid, and a planet without a stagnant lid cools the fastest. A graphite lid needs to be approximately ten times thicker than a corresponding silicate lid in order to produce similar thermal evolution.
△ Less
Submitted 10 October, 2019; v1 submitted 16 September, 2019;
originally announced September 2019.
-
Deep Learning for Segmentation using an Open Large-Scale Dataset in 2D Echocardiography
Authors:
Sarah Leclerc,
Erik Smistad,
João Pedrosa,
Andreas Østvik,
Frederic Cervenansky,
Florian Espinosa,
Torvald Espeland,
Erik Andreas Rye Berg,
Pierre-Marc Jodoin,
Thomas Grenier,
Carole Lartizien,
Jan D'hooge,
Lasse Lovstakken,
Olivier Bernard
Abstract:
Delineation of the cardiac structures from 2D echocardiographic images is a common clinical task to establish a diagnosis. Over the past decades, the automation of this task has been the subject of intense research. In this paper, we evaluate how far the state-of-the-art encoder-decoder deep convolutional neural network methods can go at assessing 2D echocardiographic images, i.e segmenting cardia…
▽ More
Delineation of the cardiac structures from 2D echocardiographic images is a common clinical task to establish a diagnosis. Over the past decades, the automation of this task has been the subject of intense research. In this paper, we evaluate how far the state-of-the-art encoder-decoder deep convolutional neural network methods can go at assessing 2D echocardiographic images, i.e segmenting cardiac structures as well as estimating clinical indices, on a dataset especially designed to answer this objective. We therefore introduce the Cardiac Acquisitions for Multi-structure Ultrasound Segmentation (CAMUS) dataset, the largest publicly-available and fully-annotated dataset for the purpose of echocardiographic assessment. The dataset contains two and four-chamber acquisitions from 500 patients with reference measurements from one cardiologist on the full dataset and from three cardiologists on a fold of 50 patients. Results show that encoder-decoder based architectures outperform state-of-the-art non-deep learning methods and faithfully reproduce the expert analysis for the end-diastolic and end-systolic left ventricular volumes, with a mean correlation of 0.95 and an absolute mean error of 9.5 ml. Concerning the ejection fraction of the left ventricle, results are more contrasted with a mean correlation coefficient of 0.80 and an absolute mean error of 5.6 %. Although these results are below the inter-observer scores, they remain slightly worse than the intra-observer's ones. Based on this observation, areas for improvement are defined, which open the door for accurate and fully-automatic analysis of 2D echocardiographic images.
△ Less
Submitted 22 August, 2019; v1 submitted 16 August, 2019;
originally announced August 2019.
-
Combining Deep Learning and 3D Contrast Source Inversion in MR-based Electrical Properties Tomography
Authors:
Reijer L. Leijsen,
Cornelis A. T. van den Berg,
Andrew G. Webb,
Rob F. Remis,
Stefano Mandija
Abstract:
Magnetic resonance-electrical properties tomography (MR-EPT) is a technique used to estimate the conductivity and permittivity of tissues from MR measurements of the transmit magnetic field. Different reconstruction methods are available, however all these methods present several limitations which hamper the clinical applicability. Standard Helmholtz based MR-EPT methods are severely affected by n…
▽ More
Magnetic resonance-electrical properties tomography (MR-EPT) is a technique used to estimate the conductivity and permittivity of tissues from MR measurements of the transmit magnetic field. Different reconstruction methods are available, however all these methods present several limitations which hamper the clinical applicability. Standard Helmholtz based MR-EPT methods are severely affected by noise. Iterative reconstruction methods such as contrast source inversion-EPT (CSI-EPT) are typically time consuming and are dependent on their initialization. Deep learning (DL) based methods require a large amount of training data before sufficient generalization can be achieved. Here, we investigate the benefits achievable using a hybrid approach, i.e. using MR-EPT or DL-EPT as initialization guesses for standard 3D CSI-EPT. Using realistic electromagnetic simulations at 3 T and 7 T, the accuracy and precision of hybrid CSI reconstructions are compared to standard 3D CSI-EPT reconstructions. Our results indicate that a hybrid method consisting of an initial DL-EPT reconstruction followed by a 3D CSI-EPT reconstruction would be beneficial. DL-EPT combined with standard 3D CSI-EPT exploits the power of data driven DL-based EPT reconstructions while the subsequent CSI-EPT facilitates a better generalization by providing data consistency.
△ Less
Submitted 13 August, 2019;
originally announced August 2019.
-
Deep learning brain conductivity map** using a patch-based 3D U-net
Authors:
Nils Hampe,
Ulrich Katscher,
Cornelis A. T. van den Berg,
Khin Khin Tha,
Stefano Mandija
Abstract:
Purpose: To investigate deep learning electrical properties tomography (EPT) for application on different simulated and in-vivo datasets including pathologies for obtaining quantitative brain conductivity maps. Methods: 3D patch-based convolutional neural networks were trained to predict conductivity maps from B1 transceive phase data. To compare the performance of DLEPT networks on different data…
▽ More
Purpose: To investigate deep learning electrical properties tomography (EPT) for application on different simulated and in-vivo datasets including pathologies for obtaining quantitative brain conductivity maps. Methods: 3D patch-based convolutional neural networks were trained to predict conductivity maps from B1 transceive phase data. To compare the performance of DLEPT networks on different datasets, three datasets were used throughout this work, one from simulations and two from in-vivo measurements from healthy volunteers and cancer patients, respectively. At first, networks trained on simulations are tested on all datasets with different levels of homogeneous Gaussian noise introduced in training and testing. Secondly, to investigate potential robustness towards systematical differences between simulated and measured phase maps, in-vivo data with conductivity labels from conventional EPT is used for training. Results: High quality of reconstructions from networks trained on simulations with and without noise confirms the potential of deep learning for EPT. However, artifact encumbered results in this work uncover challenges in application of DLEPT to in-vivo data. Training DLEPT networks on conductivity labels from conventional EPT improves quality of results. This is argued to be caused by robustness to artifacts from image acquisition. Conclusions: Networks trained on simulations with added homogeneous Gaussian noise yield reconstruction artifacts when applied to in-vivo data. Training with realistic phase data and conductivity labels from conventional EPT allows for severely reducing these artifacts.
△ Less
Submitted 12 August, 2019;
originally announced August 2019.
-
A Mask-RCNN Baseline for Probabilistic Object Detection
Authors:
Phil Ammirato,
Alexander C. Berg
Abstract:
The Probabilistic Object Detection Challenge evaluates object detection methods using a new evaluation measure, Probability-based Detection Quality (PDQ), on a new synthetic image dataset. We present our submission to the challenge, a fine-tuned version of Mask-RCNN with some additional post-processing. Our method, submitted under username pammirato, is currently second on the leaderboard with a s…
▽ More
The Probabilistic Object Detection Challenge evaluates object detection methods using a new evaluation measure, Probability-based Detection Quality (PDQ), on a new synthetic image dataset. We present our submission to the challenge, a fine-tuned version of Mask-RCNN with some additional post-processing. Our method, submitted under username pammirato, is currently second on the leaderboard with a score of 21.432, while also achieving the highest spatial quality and average overall quality of detections. We hope this method can provide some insight into how detectors designed for mean average precision (mAP) evaluation behave under PDQ, as well as a strong baseline for future work.
△ Less
Submitted 14 October, 2019; v1 submitted 9 August, 2019;
originally announced August 2019.
-
Deep Learning Segmentation in 2D echocardiography using the CAMUS dataset : Automatic Assessment of the Anatomical Shape Validity
Authors:
Sarah Leclerc,
Erik Smistad,
Andreas Østvik,
Frederic Cervenansky,
Florian Espinosa,
Torvald Espeland,
Erik Andreas Rye Berg,
Pierre-Marc Jodoin,
Thomas Grenier,
Carole Lartizien,
Lasse Lovstakken,
Olivier Bernard
Abstract:
We recently published a deep learning study on the potential of encoder-decoder networks for the segmentation of the 2D CAMUS ultrasound dataset. We propose in this abstract an extension of the evaluation criteria to anatomical assessment, as traditional geometric and clinical metrics in cardiac segmentation do not take into account the anatomical correctness of the predicted shapes. The completed…
▽ More
We recently published a deep learning study on the potential of encoder-decoder networks for the segmentation of the 2D CAMUS ultrasound dataset. We propose in this abstract an extension of the evaluation criteria to anatomical assessment, as traditional geometric and clinical metrics in cardiac segmentation do not take into account the anatomical correctness of the predicted shapes. The completed study sheds a new light on the ranking of models.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
Lutwak-Petty projection inequalities for Minkowski valuations and their duals
Authors:
Astrid Berg,
Franz E. Schuster
Abstract:
Lutwak's volume inequalities for polar projection bodies of all orders are generalized to polarizations of Minkowski valuations generated by even, zonal measures on the Euclidean unit sphere. This is based on analogues of mixed projection bodies for such Minkowski valuations and a generalization of the notion of centroid bodies. A new integral representation is used to single out Lutwak's inequali…
▽ More
Lutwak's volume inequalities for polar projection bodies of all orders are generalized to polarizations of Minkowski valuations generated by even, zonal measures on the Euclidean unit sphere. This is based on analogues of mixed projection bodies for such Minkowski valuations and a generalization of the notion of centroid bodies. A new integral representation is used to single out Lutwak's inequalities as the strongest among these families of inequalities, which in turn are related to a conjecture on affine quermassintegrals. In the dual setting, a generalization of volume inequalities for intersection bodies of all orders by Leng and Lu is proved. These results are related to Grinberg's inequalities for dual affine quermassintegrals.
△ Less
Submitted 5 August, 2019;
originally announced August 2019.
-
Transceive Phase Corrected Contrast Source Inversion-Electrical Properties Tomography
Authors:
Peter R. S. Stijnman,
Stefano Mandija,
Patrick S. Fuchs,
Cornelis A. T. van den Berg,
Rob F. Remis
Abstract:
Magnetic resonance imaging (MRI) based electrical properties tomography (EPT) is the quantification of the conductivity and permittivity of different tissues. These electrical properties can be obtained through different reconstruction methods and can be used as a contrast mechanism. The work presented here continues from the two-dimensional CSI-EPT algorithm which was shown to work with two-dimen…
▽ More
Magnetic resonance imaging (MRI) based electrical properties tomography (EPT) is the quantification of the conductivity and permittivity of different tissues. These electrical properties can be obtained through different reconstruction methods and can be used as a contrast mechanism. The work presented here continues from the two-dimensional CSI-EPT algorithm which was shown to work with two-dimensional Matlab based simulations. The existing CSI-EPT algorithm is reformulated to use the transceive phase rather than relying on the transceive phase assumption. This is achieved by implementing a forward problem, computing the receive phase, into the inverse minimization problem, i.e. retrieving the electrical properties. Furthermore, the radio frequency (RF) shield is numerically implemented to model the RF fields inside the MRI more accurately. Afterwards, the algorithm is tested with three-dimensional FDTD simulations to investigate if the two-dimensional CSI-EPT can retrieve the electrical properties for three-dimensional RF fields. Finally, an MR experiment with a phantom is performed to show the potential for this method. From the results of the two-dimensional Matlab simulations it is seen that CSI-EPT can reconstruct the electrical properties using MRI accessible quantities. In the three-dimensional simulations it is observed that the electrical properties are underestimated, nonetheless, CSI-EPT is more precise than the standard Helmholtz based methods. Finally, the first CSI-EPT results using measured data are shown. The results for the reconstruction using measured data were of the same quality as the results from the FDTD simulation.
△ Less
Submitted 31 July, 2019;
originally announced July 2019.
-
Sub-kiloparsec Imaging of Lyman-alpha Emission in a Low Mass, Highly Ionized, Gravitationally Lensed Galaxy at z = 1.84
Authors:
Dawn K. Erb,
Danielle A. Berg,
Matthew W. Auger,
David L. Kaplan,
Gabriel Brammer,
Max Pettini
Abstract:
Low mass, low metallicity galaxies at low to moderate ($z\lesssim3$) redshifts offer the best opportunity for detailed examination of the interplay between massive stars, ionizing radiation and gas in sources similar to those that likely reionized the universe. We present new narrowband Hubble Space Telescope observations of Ly$α$ emission and the adjacent ultraviolet (UV) continuum in the low mas…
▽ More
Low mass, low metallicity galaxies at low to moderate ($z\lesssim3$) redshifts offer the best opportunity for detailed examination of the interplay between massive stars, ionizing radiation and gas in sources similar to those that likely reionized the universe. We present new narrowband Hubble Space Telescope observations of Ly$α$ emission and the adjacent ultraviolet (UV) continuum in the low mass ($M_{\star} = 2 \times 10^8$ M$_{\odot}$), low metallicity ($Z\sim1/20$ Z$_{\odot}$) and highly ionized gravitationally lensed galaxy SL2S J02176$-$0513 at $z=1.844$. The galaxy has strong Ly$α$ emission with photometric equivalent width $W^{\rm phot}_{\rm{Ly}α} = 218 \pm 12$ Å, at odds with the Ly$α$ escape fraction of 10%. However, the spectroscopic Ly$α$ profile suggests the presence of broad absorption underlying the emission, and the total equivalent width is consistent with the escape fraction once this underlying absorption is included. The Ly$α$ emission is more spatially extended than the UV continuum, and the 0.14" spatial resolution of HST coupled with the magnification of gravitational lensing enables us to examine the distribution of Ly$α$ and the UV continuum on sub-kiloparsec scales. We find that the peaks of the Ly$α$ emission and the UV continuum are offset by 650 pc, and there is no Ly$α$ emission arising from the region with the strongest UV light. Our combined spectroscopic and imaging data imply a significant range in neutral hydrogen column density across the object. These observations offer indirect support for a model in which ionizing radiation escapes from galaxies through channels with low column density of neutral gas.
△ Less
Submitted 26 July, 2019;
originally announced July 2019.
-
Sub-damped Lyman alpha systems in the XQ-100 survey I -- Identification and contribution to the cosmological HI budget
Authors:
Trystyn A. M. Berg,
Sara L. Ellison,
Ruben Sanchez-Ramirez,
Sebastian Lopez,
Valentina D'Odorico,
George D. Becker,
Lise Christensen,
Guido Cupani,
Kelly D. Denney,
Gabor Worseck
Abstract:
Sub-damped Lyman alpha systems (subDLAs; HI column densities of 19.0<=logN(HI)<20.3) are rarely included in the cosmic HI census performed at redshifts z>=1.5, yet are expected to contribute significantly to the overall HI mass budget of the Universe. In this paper, we present a blindly selected sample of 155 subDLAs found along 100 quasar sightlines (with a redshift path length X=475) in the XQ-1…
▽ More
Sub-damped Lyman alpha systems (subDLAs; HI column densities of 19.0<=logN(HI)<20.3) are rarely included in the cosmic HI census performed at redshifts z>=1.5, yet are expected to contribute significantly to the overall HI mass budget of the Universe. In this paper, we present a blindly selected sample of 155 subDLAs found along 100 quasar sightlines (with a redshift path length X=475) in the XQ-100 survey to investigate the contribution of subDLAs to the HI mass density of the Universe. The impact of X-Shooter's spectral resolution on sub-DLA identification is evaluated, and found to be sufficient for reliably finding absorbers with logN(HI)>=18.9. We compared the implications of searching for subDLAs solely using HI absorption versus the use of additional metal lines to confirm the identification, and found that metal-selection techniques would have missed 75 subDLAs. Using a bootstrap-Monte Carlo simulation, we computed the column density distribution function (f(N,X)) and the cosmological HI mass density of subDLAs and compared with our previous work based on the XQ-100 damped Lyman alpha systems. We do not find any significant redshift evolution in f(N,X) or cosmological HI mass density for subDLAs. However, subDLAs contribute 10-20 per cent of the total cosmological HI mass density measured at redshifts 2<z<5 (agreeing with previous measurements), and thus have a small but significant contribution to the HI budget of the Universe.
△ Less
Submitted 17 July, 2019;
originally announced July 2019.
-
KM3NeT front-end and readout electronics system: hardware, firmware and software
Authors:
The KM3NeT Collaboration,
S. Aiello,
F. Ameli,
M. Andre,
G. Androulakis,
M. Anghinolfi,
G. Anton,
M. Ardid,
J. Aublin,
C. Bagatelas,
G. Barbarino,
B. Baret,
S. Basegmez du Pree,
A. Belias,
E. Berbee,
A. M. van den Berg,
V. Bertin,
V. van Beveren,
S. Biagi,
A. Biagioni,
S. Bianucci,
M. Billault,
M. Bissinger,
P. Bos,
J. Boumaaza
, et al. (215 additional authors not shown)
Abstract:
The KM3NeT research infrastructure being built at the bottom of the Mediterranean Sea will host water-Cherenkov telescopes for the detection of cosmic neutrinos. The neutrino telescopes will consist of large volume three-dimensional grids of optical modules to detect the Cherenkov light from charged particles produced by neutrino-induced interactions. Each optical module houses 31 3-inch photomult…
▽ More
The KM3NeT research infrastructure being built at the bottom of the Mediterranean Sea will host water-Cherenkov telescopes for the detection of cosmic neutrinos. The neutrino telescopes will consist of large volume three-dimensional grids of optical modules to detect the Cherenkov light from charged particles produced by neutrino-induced interactions. Each optical module houses 31 3-inch photomultiplier tubes, instrumentation for calibration of the photomultiplier signal and positioning of the optical module and all associated electronics boards. By design, the total electrical power consumption of an optical module has been capped at seven watts. This paper presents an overview of the front-end and readout electronics system inside the optical module, which has been designed for a 1~ns synchronization between the clocks of all optical modules in the grid during a life time of at least 20 years.
△ Less
Submitted 29 July, 2019; v1 submitted 15 July, 2019;
originally announced July 2019.
-
Identifying DNS-tunneled traffic with predictive models
Authors:
Andreas Berg,
Daniel Forsberg
Abstract:
DNS is a distributed, fault tolerant system that avoids a single point of failure. As such it is an integral part of the internet as we use it today and hence deemed a safe protocol which is let through firewalls and proxies with no or little checks. This can be exploited by malicious agents. Network forensics is effective but struggles due to size of data and manual labour. This paper explores to…
▽ More
DNS is a distributed, fault tolerant system that avoids a single point of failure. As such it is an integral part of the internet as we use it today and hence deemed a safe protocol which is let through firewalls and proxies with no or little checks. This can be exploited by malicious agents. Network forensics is effective but struggles due to size of data and manual labour. This paper explores to what extent predictive models can be used to predict network traffic, what protocols are tunneled in the DNS protocol and more specifically whether the predictive performance is enhanced when analyzing DNS-queries and responses together and which feature set that can be used for DNS-tunneled network prediction. The tested protocols are SSH, SFTP and Telnet and the machine learning models used are Multi Layered Perceptron and Random Forests. To train the models we extract the IP Packet length, Name length and Name entropy of both the queries and responses in the DNS traffic. With an experimental research strategy it is empirically shown that the performance of the models increases when training the models on the query and respose pairs rather than using only queries or responses. The accuracy of the models is >83% and reduction in data size when features are extracted is roughly 95%. Our results provides evidence that machine learning is a valuable tool in detecting network protocols in a DNS tunnel and that only an small subset of network traffic is needed to detect this anomaly.
△ Less
Submitted 26 June, 2019;
originally announced June 2019.
-
Probing the origin of ultra-high-energy cosmic rays with neutrinos in the EeV energy range using the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. F. M. Albuquerque,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
S. Baur,
K. H. Becker
, et al. (367 additional authors not shown)
Abstract:
Neutrinos with energies above $10^{17}$ eV are detectable with the Surface Detector Array of the Pierre Auger Observatory. The identification is efficiently performed for neutrinos of all flavors interacting in the atmosphere at large zenith angles, as well as for Earth-skimming $τ$ neutrinos with nearly tangential trajectories relative to the earth. No neutrino candidates were found in…
▽ More
Neutrinos with energies above $10^{17}$ eV are detectable with the Surface Detector Array of the Pierre Auger Observatory. The identification is efficiently performed for neutrinos of all flavors interacting in the atmosphere at large zenith angles, as well as for Earth-skimming $τ$ neutrinos with nearly tangential trajectories relative to the earth. No neutrino candidates were found in $\sim\,14.7$ years of data taken up to 31 August 2018. This leads to restrictive upper bounds on their flux. The $90\%$ C.L. single-flavor limit to the diffuse flux of ultra-high-energy neutrinos with an $E_ν^{-2}$ spectrum in the energy range $1.0 \times 10^{17}~{\rm eV} - 2.5 \times 10^{19}~{\rm eV}$ is $E^2 {\rm d}N_ν/{\rm d}E_ν< 4.4 \times 10^{-9}~{\rm GeV~cm^{-2}~s^{-1}~sr^{-1}}$, placing strong constraints on several models of neutrino production at EeV energies and on the properties of the sources of ultra-high-energy cosmic rays.
△ Less
Submitted 16 October, 2019; v1 submitted 18 June, 2019;
originally announced June 2019.
-
Limits on point-like sources of ultra-high-energy neutrinos with the Pierre Auger Observatory
Authors:
The Pierre Auger Collaboration,
A. Aab,
P. Abreu,
M. Aglietta,
I. F. M. Albuquerque,
J. M. Albury,
I. Allekotte,
A. Almela,
J. Alvarez Castillo,
J. Alvarez-Muñiz,
G. A. Anastasi,
L. Anchordoqui,
B. Andrada,
S. Andringa,
C. Aramo,
H. Asorey,
P. Assis,
G. Avila,
A. M. Badescu,
A. Bakalova,
A. Balaceanu,
F. Barbato,
R. J. Barreira Luz,
S. Baur,
K. H. Becker
, et al. (367 additional authors not shown)
Abstract:
With the Surface Detector array (SD) of the Pierre Auger Observatory we can detect neutrinos with energy between $10^{17}\,$eV and $10^{20}\,$eV from point-like sources across the sky, from close to the Southern Celestial Pole up to $60^\circ$ in declination, with peak sensitivities at declinations around $\sim -53^\circ$ and $\sim+55^\circ$, and an unmatched sensitivity for arrival directions in…
▽ More
With the Surface Detector array (SD) of the Pierre Auger Observatory we can detect neutrinos with energy between $10^{17}\,$eV and $10^{20}\,$eV from point-like sources across the sky, from close to the Southern Celestial Pole up to $60^\circ$ in declination, with peak sensitivities at declinations around $\sim -53^\circ$ and $\sim+55^\circ$, and an unmatched sensitivity for arrival directions in the Northern hemisphere. A search has been performed for highly-inclined air showers induced by neutrinos of all flavours with no candidate events found in data taken between 1 Jan 2004 and 31 Aug 2018. Upper limits on the neutrino flux from point-like steady sources have been derived as a function of source declination. An unrivaled sensitivity is achieved in searches for transient sources with emission lasting over an hour or less, if they occur within the field of view corresponding to the zenith angle range between $60^\circ$ and $~95^\circ$ where the SD of the Pierre Auger Observatory is most sensitive to neutrinos.
△ Less
Submitted 8 November, 2019; v1 submitted 18 June, 2019;
originally announced June 2019.