-
Characterisation of analogue Monolithic Active Pixel Sensor test structures implemented in a 65 nm CMOS imaging process
Authors:
Gianluca Aglieri Rinella,
Giacomo Alocco,
Matias Antonelli,
Roberto Baccomi,
Stefania Maria Beole,
Mihail Bogdan Blidaru,
Bent Benedikt Buttwill,
Eric Buschmann,
Paolo Camerini,
Francesca Carnesecchi,
Marielle Chartier,
Yongjun Choi,
Manuel Colocci,
Giacomo Contin,
Dominik Dannheim,
Daniele De Gruttola,
Manuel Del Rio Viera,
Andrea Dubla,
Antonello di Mauro,
Maurice Calvin Donner,
Gregor Hieronymus Eberwein,
Jan Egger,
Laura Fabbietti,
Finn Feindt,
Kunal Gautam
, et al. (69 additional authors not shown)
Abstract:
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: do** levels, pixel geometries and pixel pitches (10-25…
▽ More
Analogue test structures were fabricated using the Tower Partners Semiconductor Co. CMOS 65 nm ISC process. The purpose was to characterise and qualify this process and to optimise the sensor for the next generation of Monolithic Active Pixels Sensors for high-energy physics. The technology was explored in several variants which differed by: do** levels, pixel geometries and pixel pitches (10-25 $μ$m). These variants have been tested following exposure to varying levels of irradiation up to 3 MGy and $10^{16}$ 1 MeV n$_\text{eq}$ cm$^{-2}$. Here the results from prototypes that feature direct analogue output of a 4$\times$4 pixel matrix are reported, allowing the systematic and detailed study of charge collection properties. Measurements were taken both using $^{55}$Fe X-ray sources and in beam tests using minimum ionizing particles. The results not only demonstrate the feasibility of using this technology for particle detection but also serve as a reference for future applications and optimisations.
△ Less
Submitted 13 March, 2024;
originally announced March 2024.
-
Gamma-Ray Burst observations by the high-energy charged particle detector on board the CSES-01 satellite between 2019 and 2021
Authors:
Francesco Palma,
Matteo Martucci,
Coralie Neubüser,
Alessandro Sotgiu,
Francesco Maria Follega,
Pietro Ubertini,
Angela Bazzano,
James Rodi,
Roberto Ammendola,
Davide Badoni,
Simona Bartocci,
Roberto Battiston,
Stefania Beolè,
Igor Bertello,
William Jerome Burger,
Donatella Campana,
Antonio Cicone,
Piero Cipollone,
Silvia Coli,
Livio Conti,
Andrea Contin,
Marco Cristoforetti,
Giulia D'Angelo,
Fabrizio De Angelis,
Cinzia De Donato
, et al. (46 additional authors not shown)
Abstract:
In this paper we report the detection of five strong Gamma-Ray Bursts (GRBs) by the High-Energy Particle Detector (HEPD-01) mounted on board the China Seismo-Electromagnetic Satellite (CSES-01), operational since 2018 on a Sun-synchronous polar orbit at a $\sim$ 507 km altitude and 97$^\circ$ inclination. HEPD-01 was designed to detect high-energy electrons in the energy range 3 - 100 MeV, protons…
▽ More
In this paper we report the detection of five strong Gamma-Ray Bursts (GRBs) by the High-Energy Particle Detector (HEPD-01) mounted on board the China Seismo-Electromagnetic Satellite (CSES-01), operational since 2018 on a Sun-synchronous polar orbit at a $\sim$ 507 km altitude and 97$^\circ$ inclination. HEPD-01 was designed to detect high-energy electrons in the energy range 3 - 100 MeV, protons in the range 30 - 300 MeV, and light nuclei in the range 30 - 300 MeV/n. Nonetheless, Monte Carlo simulations have shown HEPD-01 is sensitive to gamma-ray photons in the energy range 300 keV - 50 MeV, even if with a moderate effective area above $\sim$ 5 MeV. A dedicated time correlation analysis between GRBs reported in literature and signals from a set of HEPD-01 trigger configuration masks has confirmed the anticipated detector sensitivity to high-energy photons. A comparison between the simultaneous time profiles of HEPD-01 electron fluxes and photons from GRB190114C, GRB190305A, GRB190928A, GRB200826B and GRB211211A has shown a remarkable similarity, in spite of the different energy ranges. The high-energy response, with peak sensitivity at about 2 MeV, and moderate effective area of the detector in the actual flight configuration explain why these five GRBs, characterised by a fluence above $\sim$ 3 $\times$ 10$^{-5}$ erg cm$^{-2}$ in the energy interval 300 keV - 50 MeV, have been detected.
△ Less
Submitted 25 October, 2023;
originally announced October 2023.
-
Letter of Intent: the NA60+ experiment
Authors:
C. Ahdida,
G. Alocco,
F. Antinori,
M. Arba,
M. Aresti,
R. Arnaldi,
A. Baratto Roldan,
S. Beole,
A. Beraudo,
J. Bernhard,
L. Bianchi,
M. Borysova,
S. Bressler,
S. Bufalino,
E. Casula,
C. Cicalo,
S. Coli,
P. Cortese,
A. Dainese,
H. Danielsson,
A. De Falco,
K. Dehmelt,
A. Drees,
A. Ferretti,
F. Fionda
, et al. (37 additional authors not shown)
Abstract:
We propose a new fixed-target experiment for the study of electromagnetic and hard probes of the Quark-Gluon Plasma (QGP) in heavy-ion collisions at the CERN SPS. The experiment aims at performing measurements of the dimuon spectrum from threshold up to the charmonium region, and of hadronic decays of charm and strange hadrons. It is based on a muon spectrometer, which includes a toroidal magnet a…
▽ More
We propose a new fixed-target experiment for the study of electromagnetic and hard probes of the Quark-Gluon Plasma (QGP) in heavy-ion collisions at the CERN SPS. The experiment aims at performing measurements of the dimuon spectrum from threshold up to the charmonium region, and of hadronic decays of charm and strange hadrons. It is based on a muon spectrometer, which includes a toroidal magnet and six planes of tracking detectors, coupled to a vertex spectrometer, equipped with Si MAPS immersed in a dipole field. High luminosity is an essential requirement for the experiment, with the goal of taking data with 10$^6$ incident ions/s, at collision energies ranging from $\sqrt{s_{\rm NN}} = 6.3$ GeV ($E_{\rm lab}= 20$ A GeV) to top SPS energy ($\sqrt{s_{\rm NN}} = 17.3$ GeV, $E_{\rm lab}= 158$ A GeV). This document presents the physics motivation, the foreseen experimental set-up including integration and radioprotection studies, the current detector choices together with the status of the corresponding R&D, and the outcome of physics performance studies. A preliminary cost evaluation is also carried out.
△ Less
Submitted 29 December, 2022;
originally announced December 2022.
-
Digital Pixel Test Structures implemented in a 65 nm CMOS process
Authors:
Gianluca Aglieri Rinella,
Anton Andronic,
Matias Antonelli,
Mauro Aresti,
Roberto Baccomi,
Pascal Becht,
Stefania Beole,
Justus Braach,
Matthew Daniel Buckland,
Eric Buschmann,
Paolo Camerini,
Francesca Carnesecchi,
Leonardo Cecconi,
Edoardo Charbon,
Giacomo Contin,
Dominik Dannheim,
Joao de Melo,
Wen**g Deng,
Antonello di Mauro,
Jan Hasenbichler,
Hartmut Hillemanns,
Geun Hee Hong,
Artem Isakov,
Antoine Junique,
Alex Kluge
, et al. (27 additional authors not shown)
Abstract:
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the…
▽ More
The ALICE ITS3 (Inner Tracking System 3) upgrade project and the CERN EP R&D on monolithic pixel sensors are investigating the feasibility of the Tower Partners Semiconductor Co. 65 nm process for use in the next generation of vertex detectors. The ITS3 aims to employ wafer-scale Monolithic Active Pixel Sensors thinned down to 20 to 40 um and bent to form truly cylindrical half barrels. Among the first critical steps towards the realisation of this detector is to validate the sensor technology through extensive characterisation both in the laboratory and with in-beam measurements. The Digital Pixel Test Structure (DPTS) is one of the prototypes produced in the first sensor submission in this technology and has undergone a systematic measurement campaign whose details are presented in this article.
The results confirm the goals of detection efficiency and non-ionising and ionising radiation hardness up to the expected levels for ALICE ITS3 and also demonstrate operation at +20 C and a detection efficiency of 99% for a DPTS irradiated with a dose of $10^{15}$ 1 MeV n$_{\mathrm{eq}}/$cm$^2$. Furthermore, spatial, timing and energy resolutions were measured at various settings and irradiation levels.
△ Less
Submitted 10 July, 2023; v1 submitted 16 December, 2022;
originally announced December 2022.
-
The MAPS foil
Authors:
S. Beolé,
F. Carnesecchi,
G. Contin,
R. de Oliveira,
A. di Mauro,
S. Ferry,
H. Hillemanns,
A. Junique,
A. Kluge,
L. Lautner,
M. Mager,
B. Mehl,
K. Rebane,
F. Reidt,
I. Sanna,
M. Šuljić,
A. Yüncü
Abstract:
We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a flexible, light, protected, and fully integrated detector module. By using widely available printed circuit board manufacturing techniques, the production of these dev…
▽ More
We present a method of embedding a Monolithic Active Pixel Sensor (MAPS) into a flexible printed circuit board (FPC) and its interconnection by means of through-hole copper plating. The resulting assembly, baptised "MAPS foil", is a flexible, light, protected, and fully integrated detector module. By using widely available printed circuit board manufacturing techniques, the production of these devices can be scaled easily in size and volume, making it a compelling candidate for future large-scale applications.
A first series of prototypes that embed the ALPIDE chip has been produced, functionally tested, and shown to be working.
△ Less
Submitted 19 October, 2022; v1 submitted 25 May, 2022;
originally announced May 2022.
-
First demonstration of in-beam performance of bent Monolithic Active Pixel Sensors
Authors:
ALICE ITS project,
:,
G. Aglieri Rinella,
M. Agnello,
B. Alessandro,
F. Agnese,
R. S. Akram,
J. Alme,
E. Anderssen,
D. Andreou,
F. Antinori,
N. Apadula,
P. Atkinson,
R. Baccomi,
A. Badalà,
A. Balbino,
C. Bartels,
R. Barthel,
F. Baruffaldi,
I. Belikov,
S. Beole,
P. Becht,
A. Bhatti,
M. Bhopal,
N. Bianchi
, et al. (230 additional authors not shown)
Abstract:
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to ra…
▽ More
A novel approach for designing the next generation of vertex detectors foresees to employ wafer-scale sensors that can be bent to truly cylindrical geometries after thinning them to thicknesses of 20-40$μ$m. To solidify this concept, the feasibility of operating bent MAPS was demonstrated using 1.5$\times$3cm ALPIDE chips. Already with their thickness of 50$μ$m, they can be successfully bent to radii of about 2cm without any signs of mechanical or electrical damage. During a subsequent characterisation using a 5.4GeV electron beam, it was further confirmed that they preserve their full electrical functionality as well as particle detection performance.
In this article, the bending procedure and the setup used for characterisation are detailed. Furthermore, the analysis of the beam test, including the measurement of the detection efficiency as a function of beam position and local inclination angle, is discussed. The results show that the sensors maintain their excellent performance after bending to radii of 2cm, with detection efficiencies above 99.9% at typical operating conditions, paving the way towards a new class of detectors with unprecedented low material budget and ideal geometrical properties.
△ Less
Submitted 17 August, 2021; v1 submitted 27 May, 2021;
originally announced May 2021.
-
A next-generation LHC heavy-ion experiment
Authors:
D. Adamová,
G. Aglieri Rinella,
M. Agnello,
Z. Ahammed,
D. Aleksandrov,
A. Alici,
A. Alkin,
T. Alt,
I. Altsybeev,
D. Andreou,
A. Andronic,
F. Antinori,
P. Antonioli,
H. Appelshäuser,
R. Arnaldi,
I. C. Arsene,
M. Arslandok,
R. Averbeck,
M. D. Azmi,
X. Bai,
R. Bailhache,
R. Bala,
L. Barioglio,
G. G. Barnaföldi,
L. S. Barnby
, et al. (374 additional authors not shown)
Abstract:
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with th…
▽ More
The present document discusses plans for a compact, next-generation multi-purpose detector at the LHC as a follow-up to the present ALICE experiment. The aim is to build a nearly massless barrel detector consisting of truly cylindrical layers based on curved wafer-scale ultra-thin silicon sensors with MAPS technology, featuring an unprecedented low material budget of 0.05% X$_0$ per layer, with the innermost layers possibly positioned inside the beam pipe. In addition to superior tracking and vertexing capabilities over a wide momentum range down to a few tens of MeV/$c$, the detector will provide particle identification via time-of-flight determination with about 20~ps resolution. In addition, electron and photon identification will be performed in a separate shower detector. The proposed detector is conceived for studies of pp, pA and AA collisions at luminosities a factor of 20 to 50 times higher than possible with the upgraded ALICE detector, enabling a rich physics program ranging from measurements with electromagnetic probes at ultra-low transverse momenta to precision physics in the charm and beauty sector.
△ Less
Submitted 2 May, 2019; v1 submitted 31 January, 2019;
originally announced February 2019.
-
Study of hard and electromagnetic processes at CERN-SPS energies: an investigation of the high-$μ_{\mathbf{B}}$ region of the QCD phase diagram with NA60+
Authors:
M. Agnello,
F. Antinori,
H. Appelshäuser,
R. Arnaldi,
R. Bailhache,
L. Barioglio,
S. Beole,
A. Beraudo,
A. Bianchi,
L. Bianchi,
E. Bruna,
S. Bufalino,
E. Casula,
F. Catalano,
S. Chattopadhyay,
A. Chauvin,
C. Cicalo,
M. Concas,
P. Cortese,
T. Dahms,
A. Dainese,
A. Das,
D. Das,
D. Das,
I. Das
, et al. (47 additional authors not shown)
Abstract:
The exploration of the phase diagram of Quantum ChromoDynamics (QCD) is carried out by studying ultrarelativistic heavy-ion collisions. The energy range covered by the CERN SPS ($\sqrt{s_{\rm \scriptscriptstyle{NN}}} \sim$ 6-17 GeV) is ideal for the investigation of the region of the phase diagram corresponding to finite baryochemical potential ($μ_{\rm B}$), and has been little explored up to now…
▽ More
The exploration of the phase diagram of Quantum ChromoDynamics (QCD) is carried out by studying ultrarelativistic heavy-ion collisions. The energy range covered by the CERN SPS ($\sqrt{s_{\rm \scriptscriptstyle{NN}}} \sim$ 6-17 GeV) is ideal for the investigation of the region of the phase diagram corresponding to finite baryochemical potential ($μ_{\rm B}$), and has been little explored up to now. We propose in this document a new experiment, NA60+, that would address several observables which are fundamental for the understanding of the phase transition from hadronic matter towards a Quark-Gluon Plasma (QGP) at SPS energies. In particular, we propose to study, as a function of the collision energy, the production of thermal dimuons from the created system, from which one would obtain a caloric curve of the QCD phase diagram that is sensitive to the order of the phase transition. In addition, the measurement of a $ρ$-a$_1$ mixing contribution would provide conclusive insights into the restoration of the chiral symmetry of QCD. In parallel, studies of heavy quark and quarkonium production would also be carried out, addressing the measurement of transport properties of the QGP and the investigation of the onset of the deconfinement transition. The document also defines an experimental set-up which couples a vertex telescope based on monolithic active pixel sensors (MAPS) to a muon spectrometer with tracking (GEM) and triggering (RPC) detectors within a large acceptance toroidal magnet. Results of physics performance studies for most observables accessible to NA60+ are discussed, showing that the results of the experiment would lead to a significant advance of our understanding of strong interaction physics. The document has been submitted as an input to the European Particle Physics Strategy Update 2018-2020 (http://europeanstrategyupdate.web.cern.ch/).
△ Less
Submitted 19 December, 2018;
originally announced December 2018.
-
INFN What Next: Ultra-relativistic Heavy-Ion Collisions
Authors:
A. Dainese,
E. Scomparin,
G. Usai,
P. Antonioli,
R. Arnaldi,
A. Beraudo,
E. Bruna,
G. E. Bruno,
S. Bufalino,
P. Di Nezza,
M. P. Lombardo,
R. Nania,
F. Noferini,
C. Oppedisano,
S. Piano,
F. Prino,
A. Rossi,
M. Agnello,
W. M. Alberico,
B. Alessandro,
A. Alici,
G. Andronico,
F. Antinori,
S. Arcelli,
A. Badala
, et al. (116 additional authors not shown)
Abstract:
This document was prepared by the community that is active in Italy, within INFN (Istituto Nazionale di Fisica Nucleare), in the field of ultra-relativistic heavy-ion collisions. The experimental study of the phase diagram of strongly-interacting matter and of the Quark-Gluon Plasma (QGP) deconfined state will proceed, in the next 10-15 years, along two directions: the high-energy regime at RHIC a…
▽ More
This document was prepared by the community that is active in Italy, within INFN (Istituto Nazionale di Fisica Nucleare), in the field of ultra-relativistic heavy-ion collisions. The experimental study of the phase diagram of strongly-interacting matter and of the Quark-Gluon Plasma (QGP) deconfined state will proceed, in the next 10-15 years, along two directions: the high-energy regime at RHIC and at the LHC, and the low-energy regime at FAIR, NICA, SPS and RHIC. The Italian community is strongly involved in the present and future programme of the ALICE experiment, the upgrade of which will open, in the 2020s, a new phase of high-precision characterisation of the QGP properties at the LHC. As a complement of this main activity, there is a growing interest in a possible future experiment at the SPS, which would target the search for the onset of deconfinement using dimuon measurements. On a longer timescale, the community looks with interest at the ongoing studies and discussions on a possible fixed-target programme using the LHC ion beams and on the Future Circular Collider.
△ Less
Submitted 12 February, 2016;
originally announced February 2016.
-
Comparison of Fast Amplifiers for Diamond Detectors
Authors:
M. Osipenko,
S. Minutoli,
P. Musico,
M. Ripani,
B. Caiffi,
A. Balbi,
G. Ottonello,
S. Argirò,
S. Beolè,
N. Amapane,
M. Masera,
G. Mila
Abstract:
The development of Chemical Vapour Deposition (CVD) diamond detectors requests for novel signal amplifiers, capable to match the superb signal-to-noise ratio and timing response of these detectors. Existing amplifiers are still far away from this goal and are the dominant contributors to the overall system noise and the main source of degradation of the energy and timing resolution. We tested a nu…
▽ More
The development of Chemical Vapour Deposition (CVD) diamond detectors requests for novel signal amplifiers, capable to match the superb signal-to-noise ratio and timing response of these detectors. Existing amplifiers are still far away from this goal and are the dominant contributors to the overall system noise and the main source of degradation of the energy and timing resolution. We tested a number of commercial amplifiers designed for diamond detector readout to identify the best solution for a particular application. This application required a deposited energy threshold below 100 keV and timing resolution of the order of 200 ps at 200 keV. None of tested amplifiers satisfies these requirements. The best solution to such application found to be the Cividec C6 amplifier, which allows 100 keV minimal threshold, but its coincidence timing resolution at 200 keV is as large as 1.2 ns.
△ Less
Submitted 3 October, 2013;
originally announced October 2013.
-
Inclusive J/psi production in pp collisions at sqrt(s) = 2.76 TeV
Authors:
ALICE Collaboration,
B. Abelev,
J. Adam,
D. Adamova,
A. M. Adare,
M. M. Aggarwal,
G. Aglieri Rinella,
A. G. Agocs,
A. Agostinelli,
S. Aguilar Salazar,
Z. Ahammed,
A. Ahmad Masoodi,
N. Ahmad,
S. U. Ahn,
A. Akindinov,
D. Aleksandrov,
B. Alessandro,
R. Alfaro Molina,
A. Alici,
A. Alkin,
E. Almaraz Avina,
J. Alme,
T. Alt,
V. Altini,
S. Altinpinar
, et al. (948 additional authors not shown)
Abstract:
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=…
▽ More
The ALICE Collaboration has measured inclusive J/psi production in pp collisions at a center of mass energy sqrt(s)=2.76 TeV at the LHC. The results presented in this Letter refer to the rapidity ranges |y|<0.9 and 2.5<y<4 and have been obtained by measuring the electron and muon pair decay channels, respectively. The integrated luminosities for the two channels are L^e_int=1.1 nb^-1 and L^mu_int=19.9 nb^-1, and the corresponding signal statistics are N_J/psi^e+e-=59 +/- 14 and N_J/psi^mu+mu-=1364 +/- 53. We present dsigma_J/psi/dy for the two rapidity regions under study and, for the forward-y range, d^2sigma_J/psi/dydp_t in the transverse momentum domain 0<p_t<8 GeV/c. The results are compared with previously published results at sqrt(s)=7 TeV and with theoretical calculations.
△ Less
Submitted 6 November, 2012; v1 submitted 16 March, 2012;
originally announced March 2012.
