-
Single Flux Quantum-Based Digital Control of Superconducting Qubits in a Multi-Chip Module
Authors:
Chuan-Hong Liu,
Andrew Ballard,
David Olaya,
Daniel R. Schmidt,
John Biesecker,
Tammy Lucas,
Joel Ullom,
Shravan Patel,
Owen Rafferty,
Alexander Opremcak,
Kenneth Dodge,
Vito Iaia,
Tianna McBroom,
Jonathan L. Dubois,
Pete F. Hopkins,
Samuel P. Benz,
Britton L. T. Plourde,
Robert McDermott
Abstract:
The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated…
▽ More
The single flux quantum (SFQ) digital superconducting logic family has been proposed for the scalable control of next-generation superconducting qubit arrays. In the initial implementation, SFQ-based gate fidelity was limited by quasiparticle (QP) poisoning induced by the dissipative on-chip SFQ driver circuit. In this work, we introduce a multi-chip module architecture to suppress phonon-mediated QP poisoning. Here, the SFQ elements and qubits are fabricated on separate chips that are joined with In bump bonds. We use interleaved randomized benchmarking to characterize the fidelity of SFQ-based gates, and we demonstrate an error per Clifford gate of 1.2(1)%, an order-of-magnitude reduction over the gate error achieved in the initial realization of SFQ-based qubit control. We use purity benchmarking to quantify the contribution of incoherent error at 0.96(2)%; we attribute this error to photon-mediated QP poisoning mediated by the resonant mm-wave antenna modes of the qubit and SFQ-qubit coupler. We anticipate that a straightforward redesign of the SFQ driver circuit to limit the bandwidth of the SFQ pulses will eliminate this source of infidelity, allowing SFQ-based gates with fidelity approaching theoretical limits, namely 99.9% for resonant sequences and 99.99% for more complex pulse sequences involving variable pulse-to-pulse separation.
△ Less
Submitted 13 January, 2023;
originally announced January 2023.
-
Digital control of a superconducting qubit using a Josephson pulse generator at 3 K
Authors:
L. Howe,
M. Castellanos-Beltran,
A. J. Sirois,
D. Olaya,
J. Biesecker,
P. D. Dresselhaus,
S. P. Benz,
P. F. Hopkins
Abstract:
Scaling of quantum computers to fault-tolerant levels relies critically on the integration of energy-efficient, stable, and reproducible qubit control and readout electronics. In comparison to traditional semiconductor control electronics (TSCE) located at room temperature, the signals generated by Josephson junction (JJ) based rf sources benefit from small device sizes, low power dissipation, int…
▽ More
Scaling of quantum computers to fault-tolerant levels relies critically on the integration of energy-efficient, stable, and reproducible qubit control and readout electronics. In comparison to traditional semiconductor control electronics (TSCE) located at room temperature, the signals generated by Josephson junction (JJ) based rf sources benefit from small device sizes, low power dissipation, intrinsic calibration, superior reproducibility, and insensitivity to ambient fluctuations. Previous experiments to co-locate qubits and JJ-based control electronics resulted in quasiparticle poisoning of the qubit; degrading the qubit's coherence and lifetime. In this paper, we digitally control a 0.01~K transmon qubit with pulses from a Josephson pulse generator (JPG) located at the 3~K stage of a dilution refrigerator. We directly compare the qubit lifetime $T_1$, coherence time $T_2^*$, and thermal occupation $P_{th}$ when the qubit is controlled by the JPG circuit versus the TSCE setup. We find agreement to within the daily fluctuations on $\pm 0.5~μ$s and $\pm 2~μ$s for $T_1$ and $T_2^*$, respectively, and agreement to within the 1\% error for $P_{th}$. Additionally, we perform randomized benchmarking to measure an average JPG gate error of $2.1 \times 10^{-2}$. In combination with a small device size ($<25$~mm$^2$) and low on-chip power dissipation ($\ll 100~μ$W), these results are an important step towards demonstrating the viability of using JJ-based control electronics located at temperature stages higher than the mixing chamber stage in highly-scaled superconducting quantum information systems.
△ Less
Submitted 22 February, 2022; v1 submitted 24 November, 2021;
originally announced November 2021.
-
Stochastic single flux quantum neuromorphic computing using magnetically tunable Josephson junctions
Authors:
S. E. Russek,
C. A. Donnelly,
M. L. Schneider,
B. Baek,
M. R. Pufall,
W. H. Rippard,
P. F. Hopkins,
P. D. Dresselhaus,
S. P. Benz
Abstract:
Single flux quantum (SFQ) circuits form a natural neuromorphic technology with SFQ pulses and superconducting transmission lines simulating action potentials and axons, respectively. Here we present a new component, magnetic Josephson junctions, that have a tunablility and re-configurability that was lacking from previous SFQ neuromorphic circuits. The nanoscale magnetic structure acts as a tunabl…
▽ More
Single flux quantum (SFQ) circuits form a natural neuromorphic technology with SFQ pulses and superconducting transmission lines simulating action potentials and axons, respectively. Here we present a new component, magnetic Josephson junctions, that have a tunablility and re-configurability that was lacking from previous SFQ neuromorphic circuits. The nanoscale magnetic structure acts as a tunable synaptic constituent that modifies the junction critical current. These circuits can operate near the thermal limit where stochastic firing of the neurons is an essential component of the technology. This technology has the ability to create complex neural systems with greater than 10^21 neural firings per second with approximately 1 W dissipation.
△ Less
Submitted 12 November, 2016;
originally announced December 2016.
-
Improved electronic measurement of the Boltzmann constant by Johnson noise Thermometry
Authors:
Jifeng Qu,
Samuel P Benz,
Alessio Pollarolo,
Horst Rogalla,
Weston L Tew,
Rod White,
Kunli Zhou
Abstract:
The unit of thermodynamic temperature, the kelvin, will be redefined in 2018 by fixing the value of the Boltzmann constant, k. The present CODATA recommended value of k is determined predominantly by acoustic gas-thermometry results. To provide a value of k based on different physical principles, purely electronic measurements of k were performed by using a Johnson noise thermometer to compare the…
▽ More
The unit of thermodynamic temperature, the kelvin, will be redefined in 2018 by fixing the value of the Boltzmann constant, k. The present CODATA recommended value of k is determined predominantly by acoustic gas-thermometry results. To provide a value of k based on different physical principles, purely electronic measurements of k were performed by using a Johnson noise thermometer to compare the thermal noise power of a 200 Ohm sensing resistor immersed in a triple-point-of-water cell to the noise power of a quantum-accurate pseudo-random noise waveform of nominally equal noise power. Measurements integrated over a bandwidth of 550 kHz and a total integration time of 33 days gave a measured value of k = 1.3806514(48)x10^-23 J/K, for which the relative standard uncertainty is 3.5x10^-6 and the relative offset from the CODATA 2010 value is +1.9x10^-6.
△ Less
Submitted 31 December, 2014;
originally announced January 2015.
-
Spin-transfer torque switching in nanopillar superconducting-magnetic hybrid Josephson junctions
Authors:
Burm Baek,
William H. Rippard,
Matthew R. Pufall,
Samuel P. Benz,
Stephen E. Russek,
Horst Rogalla,
Paul D. Dresselhaus
Abstract:
The combination of superconducting and magnetic materials to create novel superconducting devices has been motivated by the discovery of Josephson critical current (Ics) oscillations as a function of magnetic layer thickness and the demonstration of devices with switchable critical currents. However, none of the hybrid devices have shown any spintronic effects, such as spin-transfer torque, which…
▽ More
The combination of superconducting and magnetic materials to create novel superconducting devices has been motivated by the discovery of Josephson critical current (Ics) oscillations as a function of magnetic layer thickness and the demonstration of devices with switchable critical currents. However, none of the hybrid devices have shown any spintronic effects, such as spin-transfer torque, which are currently used in room-temperature magnetic devices, including spin-transfer torque random-access memory and spin-torque nano-oscillators. We have developed nanopillar Josephson junctions with a minimum feature size of 50 nm and magnetic barriers exhibiting magnetic pseudo-spin-valve behavior at 4 K. These devices allow current-induced magnetization switching that results in 20-fold changes in Ics. The current-induced magnetic switching is consistent with spin-transfer torque models for room-temperature magnetic devices. Our work demonstrates that devices that combine superconducting and spintronic functions show promise for the development of a nanoscale, nonvolatile, cryogenic memory technology.
△ Less
Submitted 16 October, 2014;
originally announced October 2014.
-
Hybrid superconducting-magnetic memory device using competing order parameters
Authors:
Burm Baek,
William H. Rippard,
Samuel P. Benz,
Stephen E. Russek,
Paul D. Dresselhaus
Abstract:
Superconducting devices, which rely on modulating a complex superconducting order parameter in a Josephson junction, have been developed for low power logic operations, high-frequency oscillators, and exquisite magnetic field sensors. Magnetic devices, which rely on the modulation of a local vector order parameter- the local magnetic moment, have been used as memory elements, high-frequency spin-t…
▽ More
Superconducting devices, which rely on modulating a complex superconducting order parameter in a Josephson junction, have been developed for low power logic operations, high-frequency oscillators, and exquisite magnetic field sensors. Magnetic devices, which rely on the modulation of a local vector order parameter- the local magnetic moment, have been used as memory elements, high-frequency spin-transfer oscillators, and magnetic field sensors. In a hybrid superconducting-magnetic device, these two order parameters compete, with one type of order suppressing the other. Recent interest in ultra-low-power, high-density cryogenic memories has spurred new interest in merging superconducting and magnetic behavior so as to exploit these two competing order parameters to produce novel switching elements. Here, we describe a reconfigurable two-layer magnetic spin valve integrated within a Josephson junction. Our measurements separate the suppression in the superconducting coupling due to the exchange field in the magnetic layers, which causes depairing of the supercurrent, from the suppression due to the magnetic field generated by the magnetic layers. The exchange field suppression of the superconducting order parameter is a tunable and switchable behavior that is also scalable to nanometer device dimensions. These devices are the first to demonstrate nonvolatile, size-independent switching of the Josephson coupling, in both magnitude and phase, and they may allow for the first nanoscale superconducting memory devices.
△ Less
Submitted 29 October, 2013; v1 submitted 8 October, 2013;
originally announced October 2013.
-
An Electronic Measurement of the Boltzmann Constant
Authors:
Samuel P. Benz,
Alessio Pollarolo,
Jifeng Qu,
Horst Rogalla,
Chiharu Urano,
Weston L. Tew,
Paul D. Dresselhaus,
D. Rod White
Abstract:
The Boltzmann constant was measured by comparing the Johnson noise of a resistor at the triple point of water with a quantum-based voltage reference signal generated with a superconducting Josephson-junction waveform synthesizer. The measured value of k = 1.380651(18) \times 10^-23 J/K is consistent with the current CODATA value and the combined uncertainties. This is our first measurement of k wi…
▽ More
The Boltzmann constant was measured by comparing the Johnson noise of a resistor at the triple point of water with a quantum-based voltage reference signal generated with a superconducting Josephson-junction waveform synthesizer. The measured value of k = 1.380651(18) \times 10^-23 J/K is consistent with the current CODATA value and the combined uncertainties. This is our first measurement of k with this electronic technique, and the first noise thermometry measurement to achieve a relative combined uncertainty of 13 parts in 10^6. We describe the most recent improvements to our Johnson Noise Thermometer that enabled the statistical uncertainty contribution to be reduced to seven parts in 10^6, as well as the further reduction of spurious systematic errors and EMI effects. The uncertainty budget for this measurement is discussed in detail.
△ Less
Submitted 31 December, 2010;
originally announced January 2011.
