Showing 1–40 of 40 results for author: Bentley, M

Isospin symmetry in the $T = 1, A = 62$ triplet

Authors: K. Wimmer, P. Ruotsalainen, S. M. Lenzi, A. Poves, T. Hüyük, F. Browne, P. Doornenbal, T. Koiwai, T. Arici, K. Auranen, M. A. Bentley, M. L. Cortés, C. Delafosse, T. Eronen, Z. Ge, T. Grahn, P. T. Greenlees, A. Illana, N. Imai, H. Joukainen, R. Julin, A. Jungclaus, H. Jutila, A. Kankainen, N. Kitamura , et al. (22 additional authors not shown)

Abstract: Excited states in the $T_z = 0, -1$ nuclei $^{62}$Ga and $^{62}$Ge were populated in direct reactions of relativistic radioactive ion beams at the RIBF. Coincident \grays were measured with the DALI2$^+$ array and uniquely assigned to the $A=62$ isobars. In addition, $^{62}$Ge was also studied independently at JYFL-ACCLAB using the ${}^{24}$Mg(${}^{40}$Ca,$2n$)${}^{62}$Ge fusion-evaporation reacti… ▽ More Excited states in the $T_z = 0, -1$ nuclei $^{62}$Ga and $^{62}$Ge were populated in direct reactions of relativistic radioactive ion beams at the RIBF. Coincident \grays were measured with the DALI2$^+$ array and uniquely assigned to the $A=62$ isobars. In addition, $^{62}$Ge was also studied independently at JYFL-ACCLAB using the ${}^{24}$Mg(${}^{40}$Ca,$2n$)${}^{62}$Ge fusion-evaporation reaction. The first excited $T=1, J^π=2^+$ states in $^{62}$Ga and $^{62}$Ge were identified at $979(1)$ and $965(1)$~keV, respectively, resolving discrepant interpretations in the literature. States beyond the first $2^+$ state in $^{62}$Ge were also identified for the first time in the present work. The results are compared with shell-model calculations in the $fp$ model space. Mirror and triplet energy differences are analyzed in terms of individual charge-symmetry and charge-independence breaking contributions. The MED results confirm the shrinkage of the $p$-orbits' radii when they are occupied by at least one nucleon on average. △ Less

Submitted 11 October, 2023; originally announced October 2023.

Comments: aceepted Phys. Lett. B

Cometary dust collected by MIDAS on board Rosetta II. Particle shape descriptors and pristineness evaluation

Authors: M. Kim, T. Mannel, J. Lasue, A. Longobardo, M. S. Bentley, R. Moissl, the MIDAS team

Abstract: The MIDAS (Micro-Imaging Dust Analysis System) atomic force microscope on board the Rosetta comet orbiter investigated and measured the 3D topography of a few hundred nm to tens of $μ$m sized dust particles of 67P/Churyumov-Gerasimenko with resolutions down to a few nanometers, giving insights into the physical processes of our early Solar System. We analyze the shapes of the cometary dust particl… ▽ More The MIDAS (Micro-Imaging Dust Analysis System) atomic force microscope on board the Rosetta comet orbiter investigated and measured the 3D topography of a few hundred nm to tens of $μ$m sized dust particles of 67P/Churyumov-Gerasimenko with resolutions down to a few nanometers, giving insights into the physical processes of our early Solar System. We analyze the shapes of the cometary dust particles collected by MIDAS on the basis of a recently updated particle catalog with the aim to determine which structural properties remained pristine. We develop a set of shape descriptors and metrics such as aspect ratio, elongation, circularity, convexity, and particle surface/volume distribution, which can be used to describe the distribution of particle shapes. Furthermore, we compare the structure of the MIDAS dust particles and the clusters in which the particles were deposited to those found in previous laboratory experiments and by Rosetta/COSIMA. Finally, we combine our findings to calculate a pristineness score for MIDAS particles and determine the most pristine particles and their properties. We find that the morphological properties of all cometary dust particles at the micrometer scale are surprisingly homogeneous despite originating from diverse cometary environments (e.g., different collection targets that are associated with cometary activities/source regions and collection velocities/periods). We next find that the types of clusters found by MIDAS show good agreement with those defined by previous laboratory experiments, however, there are some differences to those found by Rosetta/COSIMA. Based on our result, we rate 19 out of 1082 MIDAS particles at least moderately pristine, i.e., they are not substantially flattened by impact, not fragmented, and/or not part of a fragmentation cluster. △ Less

Submitted 17 August, 2023; v1 submitted 10 August, 2023; originally announced August 2023.

Comments: 40 pages, 31 figures, 1 online table

Journal ref: A&A 678, A179 (2023)

Sensitivity study of mirror energy differences in positive parity bands of T=3/2 A=45 nuclei

Authors: W. Satula, M. A. Bentley, A. Jalili, S. Uthayakumaar

Abstract: Symmetry conserving density functional theory (DFT) based no-core-configuration-interaction framework (DFT-NCCI) is an excellent tool for precision calculation of diverse (pseudo-)observables related to isospin symmetry breaking from elusive isospin impurities trough isospin corrections to superallowed beta decays to mirror- and triplet-displacement energies and mirror energy differences (MED) alo… ▽ More Symmetry conserving density functional theory (DFT) based no-core-configuration-interaction framework (DFT-NCCI) is an excellent tool for precision calculation of diverse (pseudo-)observables related to isospin symmetry breaking from elusive isospin impurities trough isospin corrections to superallowed beta decays to mirror- and triplet-displacement energies and mirror energy differences (MED) along rotational bands. In our recent work [Phys. Rev. C {\bf 106}, 024327 (2022)] we performed axial DFT-NCCI calculations and failed to reproduce a sign of MED in positive-parity bands of 45Sc/45Cr T=3/2 mirror pair what casts a shadow on credibility of the model. In this work we aim to perform a thorough analysis of this case with the focus on sensitivity of our predictions with respect to: (i) low-energy constants (LECs) of our effective contact charge symmetry breaking (CSB) force and (ii) nuclear shape. We demonstrate, among the other, that inclusion of triaxial positive-parity ground-state - which is actually the global positive-parity minimum in our unconstrained mean-field calculation - in the DFT-NCCI calculations instead of the axial one used before leads to MED which are consistent with experimental data concerning both their sign as well as magnitude without any need for fine-tuning of the model's LECs. △ Less

Submitted 7 August, 2023; originally announced August 2023.

Comments: 7 pages, 3 figures

Post-CCSD(T) corrections to bond distances and vibrational frequencies: the power of $Λ$

Authors: Maciej Spiegel, Emmanouil Semidalas, Jan M. L. Martin, Megan R. Bentley, John F. Stanton

Abstract: The importance of post-CCSD(T) corrections as high as CCSDTQ56 for ground-state spectroscopic constants ($D_e$, $ω_e$, $ω_ex_e$, and $α_e$) has been surveyed for a sample of two dozen mostly heavy-atom diatomics spanning a broad range of static correlation strength. While CCSD(T) is known to be an unusually felicitous `Pauling point' between accuracy and computational cost, performance leaves some… ▽ More The importance of post-CCSD(T) corrections as high as CCSDTQ56 for ground-state spectroscopic constants ($D_e$, $ω_e$, $ω_ex_e$, and $α_e$) has been surveyed for a sample of two dozen mostly heavy-atom diatomics spanning a broad range of static correlation strength. While CCSD(T) is known to be an unusually felicitous `Pauling point' between accuracy and computational cost, performance leaves something to be desired for molecules with strong static correlation. We find CCSDT(Q)$_Λ$ to be the next `sweet spot' up, of comparable or superior quality to the much more expensive CCSDTQ. A similar comparison applies to CCSDTQ(5)$_Λ$ vs. CCSDTQ5, while CCSDTQ5(6)$_Λ$ is essentially indistinguishable from CCSDTQ56. A composite of CCSD(T)-X2C/ACV5Z-X2C with [CCSDT(Q)$_Λ$ -- CCSD(T)]/cc-pVTZ or even cc-pVDZ basis sets appears highly effective for computational vibrational spectroscopy. Unlike CCSDT(Q) which breaks down for the ozone vibrational frequencies, CCSDT(Q)$_Λ$ handles them gracefully. △ Less

Submitted 22 August, 2023; v1 submitted 27 July, 2023; originally announced July 2023.

Comments: Mol. Phys., in press [Timothy J. Lee memorial issue]

Journal ref: Mol. Phys. 122, e2252114 (2024)

Cometary dust collected by MIDAS on board Rosetta. I. Dust particle catalog and statistics

Authors: M. Kim, T. Mannel, P. D. Boakes, M. S. Bentley, A. Longobardo, H. Jeszenszky, R. Moissl, the MIDAS team

Abstract: We aim to catalog all dust particles collected and analyzed by MIDAS, together with their main statistical properties such as size, height, basic shape descriptors, and collection time. Furthermore, we aim to present the scientific results that can be extracted from the catalog (e.g., the size distribution and statistical characteristics of cometary dust particles). The existing MIDAS particle cat… ▽ More We aim to catalog all dust particles collected and analyzed by MIDAS, together with their main statistical properties such as size, height, basic shape descriptors, and collection time. Furthermore, we aim to present the scientific results that can be extracted from the catalog (e.g., the size distribution and statistical characteristics of cometary dust particles). The existing MIDAS particle catalog has been greatly improved by a careful re-analysis of the AFM images, leading to the addition of more dust particles and a detailed description of the particle properties. The catalog documents all images of identified dust particles and includes a variety of derived information tabulated one record per particle. Furthermore, the best image of each particle was chosen for subsequent studies. Finally, we created dust coverage maps and clustering maps of the MIDAS collection targets and traced any possible fragmentation of collected particles with a detailed algorithm. The revised MIDAS catalog includes 3523 MIDAS particles in total, where 1857 particles are expected to be usable for further analysis (418 scans of particles before perihelion + 1439 scans of particles after perihelion, both after the removal of duplicates), ranging from about 40 nm to about 8 $μ$m in size. The mean value of the equivalent radius derived from the 2D projection of the particles is 0.91 ${\pm}$ 0.79 $μ$m. A slightly improved equivalent radius based on the particle's volume coincides in the range of uncertainties with a value of 0.56 ${\pm}$ 0.45 $μ$m. We note that those sizes and all following MIDAS particle size distributions are expected to be influenced by the fragmentation of MIDAS particles upon impact on the collection targets. Furthermore, fitting the slope of the MIDAS particle size distribution with a power law of a r ${^b}$ yields an index b of ${\sim}$ -1.67 to -1.88. △ Less

Submitted 17 March, 2023; v1 submitted 21 February, 2023; originally announced February 2023.

Comments: 28 pages, 5 figure, 2 online tables

Report number: 673, A129

Journal ref: A&A 673, A129 (2023)

Interactive-Rate Supervisory Control for Arbitrarily-Routed Multi-Tendon Robots via Motion Planning

Authors: Michael Bentley, Caleb Rucker, Alan Kuntz

Abstract: Tendon-driven robots, where one or more tendons under tension bend and manipulate a flexible backbone, can improve minimally invasive surgeries involving difficult-to-reach regions in the human body. Planning motions safely within constrained anatomical environments requires accuracy and efficiency in shape estimation and collision checking. Tendon robots that employ arbitrarily-routed tendons can… ▽ More Tendon-driven robots, where one or more tendons under tension bend and manipulate a flexible backbone, can improve minimally invasive surgeries involving difficult-to-reach regions in the human body. Planning motions safely within constrained anatomical environments requires accuracy and efficiency in shape estimation and collision checking. Tendon robots that employ arbitrarily-routed tendons can achieve complex and interesting shapes, enabling them to travel to difficult-to-reach anatomical regions. Arbitrarily-routed tendon-driven robots have unintuitive nonlinear kinematics. Therefore, we envision clinicians leveraging an assistive interactive-rate motion planner to automatically generate collision-free trajectories to clinician-specified destinations during minimally-invasive surgical procedures. Standard motion-planning techniques cannot achieve interactive-rate motion planning with the current expensive tendon robot kinematic models. In this work, we present a 3-phase motion-planning system for arbitrarily-routed tendon-driven robots with a Precompute phase, a Load phase, and a Supervisory Control phase. Our system achieves an interactive rate by develo** a fast kinematic model (over 1,000 times faster than current models), a fast voxel collision method (27.6 times faster than standard methods), and leveraging a precomputed roadmap of the entire robot workspace with pre-voxelized vertices and edges. In simulated experiments, we show that our motion-planning method achieves high tip-position accuracy and generates plans at 14.8 Hz on average in a segmented collapsed lung pleural space anatomical environment. Our results show that our method is 17,700 times faster than popular off-the-shelf motion planning algorithms with standard FK and collision detection approaches. Our open-source code is available online. △ Less

Submitted 29 November, 2022; originally announced November 2022.

Comments: 21 pages, 11 figures, preprint of the accepted version to IEEE Access published in July 2022; copyright retained by the authors

Journal ref: IEEE Access, vol. 10, pp. 80999-81019, Jul. 2022

Toward Learning Context-Dependent Tasks from Demonstration for Tendon-Driven Surgical Robots

Authors: Yixuan Huang, Michael Bentley, Tucker Hermans, Alan Kuntz

Abstract: Tendon-driven robots, a type of continuum robot, have the potential to reduce the invasiveness of surgery by enabling access to difficult-to-reach anatomical targets. In the future, the automation of surgical tasks for these robots may help reduce surgeon strain in the face of a rapidly growing population. However, directly encoding surgical tasks and their associated context for these robots is i… ▽ More Tendon-driven robots, a type of continuum robot, have the potential to reduce the invasiveness of surgery by enabling access to difficult-to-reach anatomical targets. In the future, the automation of surgical tasks for these robots may help reduce surgeon strain in the face of a rapidly growing population. However, directly encoding surgical tasks and their associated context for these robots is infeasible. In this work we take steps toward a system that is able to learn to successfully perform context-dependent surgical tasks by learning directly from a set of expert demonstrations. We present three models trained on the demonstrations conditioned on a vector encoding the context of the demonstration. We then use these models to plan and execute motions for the tendon-driven robot similar to the demonstrations for novel context not seen in the training set. We demonstrate the efficacy of our method on three surgery-inspired tasks. △ Less

Submitted 14 October, 2021; originally announced October 2021.

Comments: 7 pages, 6 figures, to be published in the proceedings of the 2021 International Symposium on Medical Robotics (ISMR)

Self-Shielding Copper Substrate Neutron Supermirror Guides

Authors: P. M. Bentley, R. Hall-Wilton, C. P. Cooper-Jensen, N. Cherkashyna, K. Kanaki, C. Schanzer, M. Schneider, P. Boeni

Abstract: The invention of self-shielding copper substrate neutron guides is described, along with the rationale behind the development, and the realisation of commercial supply. The relative advantages with respect to existing technologies are quantified. These include ease of manufacture, long lifetime, increased thermal conductivity, and enhanced fast neutron attenuation in the keV-MeV energy range. Whil… ▽ More The invention of self-shielding copper substrate neutron guides is described, along with the rationale behind the development, and the realisation of commercial supply. The relative advantages with respect to existing technologies are quantified. These include ease of manufacture, long lifetime, increased thermal conductivity, and enhanced fast neutron attenuation in the keV-MeV energy range. Whilst the activation of copper is initially higher than for other material options, for the full energy spectrum, many of the isotopes are short-lived, so that for realistic maintenance access times the radiation dose to workers is expected to be lower than steel and in the lowest zoning category for radiation safety outside the spallation target monolith. There is no impact on neutron reflectivity performance relative to established alternatives, and the manufacturing cost is similar to other polished metal substrates. △ Less

Submitted 16 April, 2021; v1 submitted 6 April, 2021; originally announced April 2021.

Safer Motion Planning of Steerable Needles via a Shaft-to-Tissue Force Model

Authors: Michael Bentley, Caleb Rucker, Chakravarthy Reddy, Oren Salzman, Alan Kuntz

Abstract: Steerable needles are capable of accurately targeting difficult-to-reach clinical sites in the body. By bending around sensitive anatomical structures, steerable needles have the potential to reduce the invasiveness of many medical procedures. However, inserting these needles with curved trajectories increases the risk of tissue damage due to perpendicular forces exerted on the surrounding tissue… ▽ More Steerable needles are capable of accurately targeting difficult-to-reach clinical sites in the body. By bending around sensitive anatomical structures, steerable needles have the potential to reduce the invasiveness of many medical procedures. However, inserting these needles with curved trajectories increases the risk of tissue damage due to perpendicular forces exerted on the surrounding tissue by the needle's shaft, potentially resulting in lateral shearing through tissue. Such forces can cause significant damage to surrounding tissue, negatively affecting patient outcomes. In this work, we derive a tissue and needle force model based on a Cosserat string formulation, which describes the normal forces and frictional forces along the shaft as a function of the planned needle path, friction model and parameters, and tip piercing force. We propose this new force model and associated cost function as a safer and more clinically relevant metric than those currently used in motion planning for steerable needles. We fit and validate our model through physical needle robot experiments in a gel phantom. We use this force model to define a bottleneck cost function for motion planning and evaluate it against the commonly used path-length cost function in hundreds of randomly generated 3-D environments. Plans generated with our force-based cost show a 62% reduction in the peak modeled tissue force with only a 0.07% increase in length on average compared to using the path-length cost in planning. Additionally, we demonstrate the ability to plan motions with our force-based cost function in a lung tumor biopsy scenario from a segmented computed tomography (CT) scan. By planning motions for the needle that aim to minimize the modeled needle-to-tissue force explicitly, our method plans needle paths that may reduce the risk of significant tissue damage while still reaching desired targets in the body. △ Less

Submitted 29 November, 2022; v1 submitted 6 January, 2021; originally announced January 2021.

Comments: 17 pages, 12 figures, preprint of an article submitted for consideration in Journal of Medical Robotics Research (JMRR) in 2022

New high-sensitivity searches for neutrons converting into antineutrons and/or sterile neutrons at the European Spallation Source

Authors: A. Addazi, K. Anderson, S. Ansell, K. Babu, J. Barrow, D. V. Baxter, P. M. Bentley, Z. Berezhiani, R. Bevilacqua, C. Bohm, G. Brooijmans, J. Broussard, R. Biondi, B. Dev, C. Crawford, A. Dolgov, K. Dunne, P. Fierlinger, M. R. Fitzsimmons, A. Fomin, M. Frost, S. Gardner, A. Galindo-Uribarri, E. Golubeva, S. Girmohanta , et al. (70 additional authors not shown)

Abstract: The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon numbe… ▽ More The violation of Baryon Number, $\mathcal{B}$, is an essential ingredient for the preferential creation of matter over antimatter needed to account for the observed baryon asymmetry in the universe. However, such a process has yet to be experimentally observed. The HIBEAM/NNBAR %experiment program is a proposed two-stage experiment at the European Spallation Source (ESS) to search for baryon number violation. The program will include high-sensitivity searches for processes that violate baryon number by one or two units: free neutron-antineutron oscillation ($n\rightarrow \bar{n}$) via mixing, neutron-antineutron oscillation via regeneration from a sterile neutron state ($n\rightarrow [n',\bar{n}'] \rightarrow \bar{n}$), and neutron disappearance ($n\rightarrow n'$); the effective $Δ\mathcal{B}=0$ process of neutron regeneration ($n\rightarrow [n',\bar{n}'] \rightarrow n$) is also possible. The program can be used to discover and characterise mixing in the neutron, antineutron, and sterile neutron sectors. The experiment addresses topical open questions such as the origins of baryogenesis, the nature of dark matter, and is sensitive to scales of new physics substantially in excess of those available at colliders. A goal of the program is to open a discovery window to neutron conversion probabilities (sensitivities) by up to three orders of magnitude compared with previous searches. The opportunity to make such a leap in sensitivity tests should not be squandered. The experiment pulls together a diverse international team of physicists from the particle (collider and low energy) and nuclear physics communities, while also including specialists in neutronics and magnetics. △ Less

Submitted 8 June, 2020; originally announced June 2020.

Experimental identification of the $T = 1$, $J^π = 6^+$ state of $^{54}$Co and isospin symmetry in $A = 54$ studied via one-nucleon knockout reactions

Authors: M. Spieker, D. Weisshaar, A. Gade, B. A. Brown, P. Adrich, D. Bazin, M. A. Bentley, J. R. Brown, C. M. Campbell, C. Aa. Diget, B. Elman, T. Glasmacher, M. Hill, B. Longfellow, B. Pritychenko, A. Ratkiewicz, D. Rhodes, J. A. Tostevin

Abstract: New experimental data obtained from $γ$-ray tagged one-neutron and one-proton knockout from $^{55}$Co is presented. A candidate for the sought-after $T=1, T_z = 0, J^π = 6^+$ state in $^{54}$Co is proposed based on a comparison to the new data on $^{54}$Fe, the corresponding observables predicted by large-scale-shell-model (LSSM) calculations in the full $fp$-model space employing charge-dependent… ▽ More New experimental data obtained from $γ$-ray tagged one-neutron and one-proton knockout from $^{55}$Co is presented. A candidate for the sought-after $T=1, T_z = 0, J^π = 6^+$ state in $^{54}$Co is proposed based on a comparison to the new data on $^{54}$Fe, the corresponding observables predicted by large-scale-shell-model (LSSM) calculations in the full $fp$-model space employing charge-dependent contributions, and isospin-symmetry arguments. Furthermore, possible isospin-symmetry breaking in the $A=54$, $T=1$ triplet is studied by calculating the experimental $c$ coefficients of the isobaric mass multiplet equation (IMME) up to the maximum possible spin $J=6$ expected for the $(1f_{7/2})^{-2}$ two-hole configuration relative to the doubly-magic nucleus $^{56}$Ni. The experimental quantities are compared to the theoretically predicted $c$ coefficients from LSSM calculations using two-body matrix elements obtained from a realistic chiral effective field theory potential at next-to-next-to-next-to-leading order (N$^3$LO). △ Less

Submitted 23 March, 2020; originally announced March 2020.

Comments: 6 pages, 5 figures. Work has been published

Journal ref: Phys. Rev. C 100, 061303(R) (2019)

Simulating neutron transport in long beamlines at a spallation neutron source using Geant4

Authors: Douglas D. DiJulio, Isak Svensson, Xiao Xiao Cai, Joakim Cederkall, Phillip M. Bentley

Abstract: The transport of neutrons in long beamlines at spallation neutron sources presents a unique challenge for Monte-Carlo transport calculations. This is due to the need to accurately model the deep-penetration of high-energy neutrons through meters of thick dense shields close to the source and at the same time to model the transport of low-energy neutrons across distances up to around 150 m in lengt… ▽ More The transport of neutrons in long beamlines at spallation neutron sources presents a unique challenge for Monte-Carlo transport calculations. This is due to the need to accurately model the deep-penetration of high-energy neutrons through meters of thick dense shields close to the source and at the same time to model the transport of low-energy neutrons across distances up to around 150 m in length. Typically, such types of calculations may be carried out with MCNP-based codes or alternatively PHITS. However, in recent years there has been an increased interest in the suitability of Geant4 for such types of calculations. Therefore, we have implemented supermirror physics, a neutron chopper module and the duct-source variance reduction technique for low-energy neutron transport from the PHITS Monte-Carlo code into Geant4. In the current work, we present a series of benchmarks of these extensions with the PHITS software, which demonstrates the suitability of Geant4 for simulating long neutron beamlines at a spallation neutron source, such as the European Spallation Source, currently under construction in Lund, Sweden. △ Less

Submitted 3 January, 2020; originally announced January 2020.

Comments: ICANS-XXIII

A direct measurement of the 17O(a,g)21Ne reaction in inverse kinematics and its impact on heavy element production

Authors: M. P. Taggart, C. Akers, A. M. Laird, U. Hager, C. Ruiz, D. A. Hutcheon, M. A. Bentley, J. R. Brown, L. Buchmann, A. A. Chen, J. Chen, K. A. Chipps, A. Choplin, J. M. D'Auria, B. Davids, C. Davis, C. Aa. Diget, L. Erikson, J. Fallis, S. P. Fox, U. Frischknecht, B. R. Fulton, N. Galinski, U. Greife, R. Hirschi , et al. (11 additional authors not shown)

Abstract: During the slow neutron capture process in massive stars, reactions on light elements can both produce and absorb neutrons thereby influencing the final heavy element abundances. At low metallicities, the high neutron capture rate of 16-O can inhibit s-process nucleosynthesis unless the neutrons are recycled via the 17O(a,n)20Ne reaction. The efficiency of this neutron recycling is determined by c… ▽ More During the slow neutron capture process in massive stars, reactions on light elements can both produce and absorb neutrons thereby influencing the final heavy element abundances. At low metallicities, the high neutron capture rate of 16-O can inhibit s-process nucleosynthesis unless the neutrons are recycled via the 17O(a,n)20Ne reaction. The efficiency of this neutron recycling is determined by competition between the 17O(a,n)20Ne and 17O(a,g)21Ne reactions. While some experimental data are available on the former reaction, no data exist for the radiative capture channel at the relevant astrophysical energies. The 17O(a,g)21Ne reaction has been studied directly using the DRAGON recoil separator at the TRIUMF Laboratory. The reaction cross section has been determined at energies between 0.6 and 1.6 MeV Ecm, reaching into the Gamow window for core helium burning for the first time. Resonance strengths for resonances at 0.63, 0.721, 0.81 and 1.122 MeV Ecm have been extracted. The experimentally based reaction rate calculated represents a lower limit, but suggests that significant s-process nucleosynthesis occurs in low metallicity massive stars. △ Less

Submitted 2 October, 2019; originally announced October 2019.

Comments: 7 pages, 5 figures

Journal ref: Physics Letters B 798 (2019) 134894

Population-based metaheuristic optimization in neutron optics and shielding design

Authors: D. D. DiJulio, H. Björgvinsdóttir, C. Zendler, P. M. Bentley

Abstract: Population-based metaheuristic algorithms are powerful tools in the design of neutron scattering instruments and the use of these types of algorithms for this purpose is becoming more and more commonplace. Today there exists a wide range of algorithms to choose from when designing an instrument and it is not always initially clear which may provide the best performance. Furthermore, due to the nat… ▽ More Population-based metaheuristic algorithms are powerful tools in the design of neutron scattering instruments and the use of these types of algorithms for this purpose is becoming more and more commonplace. Today there exists a wide range of algorithms to choose from when designing an instrument and it is not always initially clear which may provide the best performance. Furthermore, due to the nature of these types of algorithms, the final solution found for a specific design scenario cannot always be guaranteed to be the global optimum. Therefore, to explore the potential benefits and differences between the varieties of these algorithms available, when applied to such design scenarios, we have carried out a detailed study of some commonly used algorithms. For this purpose, we have developed a new general optimization software package which combines a number of common metaheuristic algorithms within a single user interface and is designed specifically with neutronic calculations in mind. The algorithms included in the software are implementations of Particle-Swarm Optimization (PSO), Differential Evolution (DE), Artificial Bee Colony (ABC), and a Genetic Algorithm (GA). The software has been used to optimize the design of several problems in neutron optics and shielding, coupled with Monte-Carlo simulations, in order to evaluate the performance of the various algorithms. Generally, the performance of the algorithms depended on the specific scenarios, however it was found that DE provided the best average solutions in all scenarios investigated in this work. △ Less

Submitted 20 August, 2019; originally announced August 2019.

Comments: This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment Volume 835, 1 November 2016, Pages 157-162

One-proton and one-neutron knockout reactions from $N = Z = 28$ $^{56}$Ni to the $A = 55$ mirror pair $^{55}$Co and $^{55}$Ni

Authors: M. Spieker, A. Gade, D. Weisshaar, B. A. Brown, J. A. Tostevin, B. Longfellow, P. Adrich, D. Bazin, M. A. Bentley, J. R. Brown, C. M. Campbell, C. Aa. Diget, B. Elman, T. Glasmacher, M. Hill, B. Pritychenko, A. Ratkiewicz, D. Rhodes

Abstract: We present a high-resolution in-beam $γ$-ray spectroscopy study of excited states in the mirror nuclei $^{55}$Co and $^{55}$Ni following one-nucleon knockout from a projectile beam of $^{56}$Ni. The newly determined partial cross sections and the $γ$-decay properties of excited states provide a test of state-of-the-art nuclear structure models and probe mirror symmetry in unique ways. A mirror asy… ▽ More We present a high-resolution in-beam $γ$-ray spectroscopy study of excited states in the mirror nuclei $^{55}$Co and $^{55}$Ni following one-nucleon knockout from a projectile beam of $^{56}$Ni. The newly determined partial cross sections and the $γ$-decay properties of excited states provide a test of state-of-the-art nuclear structure models and probe mirror symmetry in unique ways. A mirror asymmetry for the partial cross sections leading to the two lowest $3/2^-$ states in the $A = 55$ mirror pair was identified as well as a significant difference in the $E1$ decays from the $1/2^+_1$ state to the same two $3/2^-$ states. The mirror asymmetry in the partial cross sections cannot be reconciled with the present shell-model picture or small mixing introduced in a two-state model. The observed mirror asymmetry in the $E1$ decay pattern, however, points at stronger mixing between the two lowest $3/2^-$ states in $^{55}$Co than in its mirror $^{55}$Ni. △ Less

Submitted 16 August, 2019; originally announced August 2019.

Journal ref: Phys. Rev. C 99, 051304(R)(2019)

Dust of comet 67P/Churyumov-Gerasimenko collected by Rosetta/MIDAS: classification and extension to the nanometre scale

Authors: T. Mannel, M. S. Bentley, P. D. Boakes, H. Jeszenszky, P. Ehrenfreund, C. Engrand, C. Koeberl, A. C. Levasseur-Regourd, J. Romstedt, R. Schmied, K. Torkar, I. Weber

Abstract: The properties of the smallest subunits of cometary dust contain information on their origin and clues to the formation of planetesimals and planets. Compared to IDPs or particles collected during the Stardust mission, dust collected in the coma of comet 67P/Churyumov-Gerasimenko during the Rosetta mission provides a resource of minimally altered material with known origin whose structural propert… ▽ More The properties of the smallest subunits of cometary dust contain information on their origin and clues to the formation of planetesimals and planets. Compared to IDPs or particles collected during the Stardust mission, dust collected in the coma of comet 67P/Churyumov-Gerasimenko during the Rosetta mission provides a resource of minimally altered material with known origin whose structural properties can be used to further the investigation of our early Solar System. A novel method is presented to achieve the highest spatial resolution of imaging possible with the MIDAS Atomic Force Microscope on-board Rosetta. 3D topographic images with resolutions of down to 8\,nm are analysed to determine the subunit sizes of particles on the nanometre scale. Three morphological classes can be determined, namely (i) fragile agglomerate particles of sizes larger than about 10\,$\mathrm{μm}$ comprised by micrometre-sized subunits that may be again aggregates and show a moderate packing density on the surface of the particles; (ii) a fragile agglomerate with a size about few tens of micrometres comprised by micrometre-sized subunits suggested to be again aggregates and arranged in a structure with a fractal dimension less than two; (iii) small, micrometre-sized particles comprised by subunits in the hundreds of nanometres size range that show surface features suggested to again represent subunits. Their differential size distributions follow a log-normal distribution with means about 100\,nm and standard deviations between 20 and 35\,nm. All micrometre-sized particles are hierarchical dust agglomerates of smaller subunits. The arrangement, appearance and size distribution of the smallest determined surface features are reminiscent of those found in CP IDPs and they represent the smallest directly detected subunits of comet 67P. △ Less

Submitted 2 July, 2019; originally announced July 2019.

Journal ref: A&A 630, A26 (2019)

Flattened loose particles from numerical simulations compared to Rosetta collected particles

Authors: Jeremie Lasue, Isabelle Maroger, Robert Botet, Philippe Garnier, Sihane Merouane, Thurid Mannel, Anny-Chantal Levasseur-Regourd, Mark Bentley

Abstract: Cometary dust particles are remnants of the primordial accretion of refractory material that occurred during the initial stages of the Solar System formation. Understanding their physical structure can help constrain their accretion process. We have developed a simple numerical simulation of aggregate impact flattening to interpret the properties of particles collected by COSIMA. The aspect ratios… ▽ More Cometary dust particles are remnants of the primordial accretion of refractory material that occurred during the initial stages of the Solar System formation. Understanding their physical structure can help constrain their accretion process. We have developed a simple numerical simulation of aggregate impact flattening to interpret the properties of particles collected by COSIMA. The aspect ratios of flattened particles from both simulations and observations are compared to differentiate between initial families of aggregates characterized by different fractal dimensions $D_f$. This dimension can differentiate between certain growth modes. The diversity of aspect ratios measured by COSIMA is consistent with either two families of aggregates with different initial $D_f$ (a family of compact aggregates with fractal dimensions close to 2.5-3 and some fluffier aggregates with fractal dimensions around 2). Alternatively, the distribution of morphologies seen by COSIMA could originate from a single type of aggregation process, such as DLPA, but to explain the range of aspect ratios observed by COSIMA a large range of dust particle cohesive strength is necessary. Furthermore, variations in cohesive strength and velocity may play a role in the higher aspect ratio range detected (>0.3). Our work allows us to explain the particle morphologies observed by COSIMA and those generated by laboratory experiments in a consistent framework. Taking into account all observations from the three dust instruments on-board Rosetta, we favor an interpretation of our simulations based on two different families of dust particles with significantly distinct fractal dimensions ejected from the cometary nucleus. △ Less

Submitted 4 March, 2019; originally announced March 2019.

Comments: 9 pages, 10 figures, accepted for publication in Astronomy and Astrophysics

Journal ref: A&A 630, A28 (2019)

Multi-level analysis of compiler induced variability and performance tradeoffs

Authors: Michael Bentley, Ian Briggs, Ganesh Gopalakrishnan, Dong H. Ahn, Ignacio Laguna, Gregory L. Lee, Holger E. Jones

Abstract: Successful HPC software applications are long-lived. When ported across machines and their compilers, these applications often produce different numerical results, many of which are unacceptable. Such variability is also a concern while optimizing the code more aggressively to gain performance. Efficient tools that help locate the program units (files and functions) within which most of the variab… ▽ More Successful HPC software applications are long-lived. When ported across machines and their compilers, these applications often produce different numerical results, many of which are unacceptable. Such variability is also a concern while optimizing the code more aggressively to gain performance. Efficient tools that help locate the program units (files and functions) within which most of the variability occurs are badly needed, both to plan for code ports and to root-cause errors due to variability when they happen in the field. In this work, we offer an enhanced version of the open-source testing framework FLiT to serve these roles. Key new features of FLiT include a suite of bisection algorithms that help locate the root causes of variability. Another added feature allows an analysis of the tradeoffs between performance and the degree of variability. Our new contributions also include a collection of case studies. Results on the MFEM finite-element library include variability/performance tradeoffs, and the identification of a (hitherto unknown) abnormal level of result-variability even under mild compiler optimizations. Results from studying the Laghos proxy application include identifying a significantly divergent floating-point result-variability and successful root-causing down to the problematic function over as little as 14 program executions. Finally, in an evaluation of 4,376 controlled injections of floating-point perturbations on the LULESH proxy application, we showed that the FLiT framework has 100 precision and recall in discovering the file and function locations of the injections all within an average of only 15 program executions. △ Less

Submitted 24 June, 2019; v1 submitted 13 November, 2018; originally announced November 2018.

Comments: 12 pages, 11 figures, accepted in HPDC 2019

Report number: LLNL-CONF-759867

Study of neutron shielding collimators for curved beamlines at the European Spallation Source

Authors: V. Santoro, D. D. DiJulio, S. Ansell, N. Cherkashyna, G. Muhrer, P. M. Bentley

Abstract: The European Spallation Source is being constructed in Lund, Sweden and is planned to be the world's brightest pulsed spallation neutron source for cold and thermal neutron beams ($\le$ 1 eV). The facility uses a 2 GeV proton beam to produce neutrons from a tungsten target. The neutrons are then moderated in a moderator assembly consisting of both liquid hydrogen and water compartments. Surroundin… ▽ More The European Spallation Source is being constructed in Lund, Sweden and is planned to be the world's brightest pulsed spallation neutron source for cold and thermal neutron beams ($\le$ 1 eV). The facility uses a 2 GeV proton beam to produce neutrons from a tungsten target. The neutrons are then moderated in a moderator assembly consisting of both liquid hydrogen and water compartments. Surrounding the moderator are 22 beamports, which view the moderator's outside surfaces. The beamports are connected to long neutron guides that transport the moderated neutrons to the sample position via reflections. As well as the desired moderated neutrons, fast neutrons coming directly from the target can find their way down the beamlines. These can create unwanted sources of background for the instruments. To mitigate such a kind of background, several instruments will use curved guides to lose direct line-of-sight (LoS) to the moderator and the target. In addition instruments can also use shielding collimators to reduce the amount of fast neutrons further traveling down the guide due to albedo reflections or streaming. Several different materials have been proposed for this purpose. We present the results of a study of different options for collimators and identify the optimal choices that balance cost, background and activation levels. △ Less

Submitted 9 April, 2018; originally announced April 2018.

Comments: 10 pages, 10 figures, Proceeding of the 4th International Workshop on Accelerator Radiation Induced Activation - ARIA'17, May 22-24, 2017 Lund, Sweden

Measurements and Monte-Carlo simulations of the particle self-shielding effect of B4C grains in neutron shielding concrete

Authors: D. D. DiJulio, C. P. Cooper-Jensen, I. Llamas-Jansa, S. Kazi, P. M. Bentley

Abstract: A combined measurement and Monte-Carlo simulation study was carried out in order to characterize the particle self-shielding effect of B4C grains in neutron shielding concrete. Several batches of a specialized neutron shielding concrete, with varying B4C grain sizes, were exposed to a 2 Å neutron beam at the R2D2 test beamline at the Institute for Energy Technology located in Kjeller, Norway. The… ▽ More A combined measurement and Monte-Carlo simulation study was carried out in order to characterize the particle self-shielding effect of B4C grains in neutron shielding concrete. Several batches of a specialized neutron shielding concrete, with varying B4C grain sizes, were exposed to a 2 Å neutron beam at the R2D2 test beamline at the Institute for Energy Technology located in Kjeller, Norway. The direct and scattered neutrons were detected with a neutron detector placed behind the concrete blocks and the results were compared to Geant4 simulations. The particle self-shielding effect was included in the Geant4 simulations by calculating effective neutron cross-sections during the Monte-Carlo simulation process. It is shown that this method well reproduces the measured results. Our results show that shielding calculations for low-energy neutrons using such materials would lead to an underestimate of the shielding required for a certain design scenario if the particle self-shielding effect is not included in the calculations. △ Less

Submitted 15 July, 2019; v1 submitted 16 November, 2017; originally announced November 2017.

Comments: This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Journal ref: Radiation Physics and Chemistry Volume 147, June 2018, Pages 40-44

Evidence for the formation of comet 67P/Churyumov-Gerasimenko through gravitational collapse of a bound clump of pebbles

Authors: Jürgen Blum, Bastian Gundlach, Maya Krause, Marco Fulle, Anders Johansen, Jessica Agarwal, Ingo von Borstel, Xian Shi, Xuanyu Hu, Mark S. Bentley, Fabrizio Capaccioni, Luigi Colangeli, Vincenzo Della Corte, Nicolas Fougere, Simon F. Green, Stavro Ivanovski, Thurid Mannel, Sihane Merouane, Alessandra Migliorini, Alessandra Rotundi, Roland Schmied, Colin Snodgrass

Abstract: The processes that led to the formation of the planetary bodies in the Solar System are still not fully understood. Using the results obtained with the comprehensive suite of instruments on-board ESA's Rosetta mission, we present evidence that comet 67P/Churyumov-Gerasimenko likely formed through the gentle gravitational collapse of a bound clump of mm-sized dust aggregates ("pebbles"), intermixed… ▽ More The processes that led to the formation of the planetary bodies in the Solar System are still not fully understood. Using the results obtained with the comprehensive suite of instruments on-board ESA's Rosetta mission, we present evidence that comet 67P/Churyumov-Gerasimenko likely formed through the gentle gravitational collapse of a bound clump of mm-sized dust aggregates ("pebbles"), intermixed with microscopic ice particles. This formation scenario leads to a cometary make-up that is simultaneously compatible with the global porosity, homogeneity, tensile strength, thermal inertia, vertical temperature profiles, sizes and porosities of emitted dust, and the steep increase in water-vapour production rate with decreasing heliocentric distance, measured by the instruments on-board the Rosetta spacecraft and the Philae lander. Our findings suggest that the pebbles observed to be abundant in protoplanetary discs around young stars provide the building material for comets and other minor bodies. △ Less

Submitted 21 October, 2017; originally announced October 2017.

Comments: accepted by MNRAS

Testing microscopically derived descriptions of nuclear collectivity: Coulomb excitation of 22Mg

Authors: J. Henderson, G. Hackman, P. Ruotsalainen, S. R. Stroberg, K. D. Launey, F. A. Ali, N. Bernier, M. A. Bentley, M. Bowry, R. Cabellero-Folch, L. J. Evitts, R. Frederick, A. B. Garnsworthy, P. E. Garrett, J. D. Holt, B. Jigmeddorj, A. I. Kilic, J. Measures, D. Muecher, B. Olaizola, E. O'Sullivan, O. Paetkau, J. Park, J. Smallcombe, C. E. Svensson , et al. (2 additional authors not shown)

Abstract: Many-body nuclear theory utilizing microscopic or chiral potentials has developed to the point that collectivity might be dealt with in an {\it ab initio} framework without the use of effective charges; for example with the proper evolution of operators, or alternatively, through the use of an appropriate and manageable subset of particle-hole excitations. We present a precise determination of… ▽ More Many-body nuclear theory utilizing microscopic or chiral potentials has developed to the point that collectivity might be dealt with in an {\it ab initio} framework without the use of effective charges; for example with the proper evolution of operators, or alternatively, through the use of an appropriate and manageable subset of particle-hole excitations. We present a precise determination of $E2$ strength in $^{22}$Mg and its mirror $^{22}$Ne by Coulomb excitation, allowing for rigorous comparisons with theory. No-core symplectic shell-model calculations were performed and agree with the new $B(E2)$ values while in-medium similarity-renormalization-group calculations consistently underpredict the absolute strength, with the missing strength found to have both isoscalar and isovector components. △ Less

Submitted 12 September, 2017; originally announced September 2017.

Comments: 7 pages, 5 figures. To be submitted to Physics Letters B

The Castalia Mission to Main Belt Comet 133P/Elst-Pizarro

Authors: C. Snodgrass, G. H. Jones, H. Boehnhardt, A. Gibbings, M. Homeister, N. Andre, P. Beck, M. S. Bentley, I. Bertini, N. Bowles, M. T. Capria, C. Carr, M. Ceriotti, A. J. Coates, V. Della Corte, K. L. Donaldson Hanna, A. Fitzsimmons, P. J. Gutierrez, O. R. Hainaut, A. Herique, M. Hilchenbach, H. H. Hsieh, E. Jehin, O. Karatekin, W. Kofman , et al. (19 additional authors not shown)

Abstract: We describe Castalia, a proposed mission to rendezvous with a Main Belt Comet (MBC), 133P/Elst-Pizarro. MBCs are a recently discovered population of apparently icy bodies within the main asteroid belt between Mars and Jupiter, which may represent the remnants of the population which supplied the early Earth with water. Castalia will perform the first exploration of this population by characterisin… ▽ More We describe Castalia, a proposed mission to rendezvous with a Main Belt Comet (MBC), 133P/Elst-Pizarro. MBCs are a recently discovered population of apparently icy bodies within the main asteroid belt between Mars and Jupiter, which may represent the remnants of the population which supplied the early Earth with water. Castalia will perform the first exploration of this population by characterising 133P in detail, solving the puzzle of the MBC's activity, and making the first in situ measurements of water in the asteroid belt. In many ways a successor to ESA's highly successful Rosetta mission, Castalia will allow direct comparison between very different classes of comet, including measuring critical isotope ratios, plasma and dust properties. It will also feature the first radar system to visit a minor body, map** the ice in the interior. Castalia was proposed, in slightly different versions, to the ESA M4 and M5 calls within the Cosmic Vision programme. We describe the science motivation for the mission, the measurements required to achieve the scientific goals, and the proposed instrument payload and spacecraft to achieve these. △ Less

Submitted 11 September, 2017; originally announced September 2017.

Comments: Accepted for publication in Advances in Space Research (special issue on Small Body Exploration). 30 pages

The footprint of cometary dust analogs: I. Laboratory experiments of low-velocity impacts and comparison with Rosetta data

Authors: L. E. Ellerbroek, B. Gundlach, A. Landeck, C. Dominik, J. Blum, S. Merouane, M. Hilchenbach, M. S. Bentley, T. Mannel, H. John, H. A. van Veen

Abstract: Cometary dust provides a unique window on dust growth mechanisms during the onset of planet formation. Measurements by the Rosetta spacecraft show that the dust in the coma of comet 67P/Churyumov-Gerasimenko has a granular structure at size scales from sub-um up to several hundreds of um, indicating hierarchical growth took place across these size scales. However, these dust particles may have bee… ▽ More Cometary dust provides a unique window on dust growth mechanisms during the onset of planet formation. Measurements by the Rosetta spacecraft show that the dust in the coma of comet 67P/Churyumov-Gerasimenko has a granular structure at size scales from sub-um up to several hundreds of um, indicating hierarchical growth took place across these size scales. However, these dust particles may have been modified during their collection by the spacecraft instruments. Here we present the results of laboratory experiments that simulate the impact of dust on the collection surfaces of COSIMA and MIDAS, instruments onboard the Rosetta spacecraft. We map the size and structure of the footprints left by the dust particles as a function of their initial size (up to several hundred um) and velocity (up to 6 m/s). We find that in most collisions, only part of the dust particle is left on the target; velocity is the main driver of the appearance of these deposits. A boundary between sticking/bouncing and fragmentation as an outcome of the particle-target collision is found at v ~ 2 m/s. For velocities below this value, particles either stick and leave a single deposit on the target plate, or bounce, leaving a shallow footprint of monomers. At velocities > 2 m/s and sizes > 80 um, particles fragment upon collision, transferring up to 50 per cent of their mass in a rubble-pile-like deposit on the target plate. The amount of mass transferred increases with the impact velocity. The morphologies of the deposits are qualitatively similar to those found by the COSIMA instrument. △ Less

Submitted 19 May, 2017; originally announced May 2017.

Comments: 14 pages, 12 figures, accepted for publication in MNRAS

Aggregate dust particles at comet 67P/Churyumov-Gerasimenko

Authors: Mark S. Bentley, Roland Schmied, Thurid Mannel, Klaus Torkar, Harald Jeszenszky, Jens Romstedt, Anny-Chantal Levasseur-Regourd, Iris Weber, Elmar K. Jessberger, Pascale Ehrenfreund, Christian Koeberl, Ove Havnes

Abstract: Comets are thought to preserve almost pristine dust particles, thus providing a unique sample of the properties of the early solar nebula. The microscopic properties of this dust played a key part in particle aggregation during the formation of the Solar System. Cometary dust was previously considered to comprise irregular, fluffy agglomerates on the basis of interpretations of remote observations… ▽ More Comets are thought to preserve almost pristine dust particles, thus providing a unique sample of the properties of the early solar nebula. The microscopic properties of this dust played a key part in particle aggregation during the formation of the Solar System. Cometary dust was previously considered to comprise irregular, fluffy agglomerates on the basis of interpretations of remote observations in the visible and infrared and the study of chondritic porous interplanetary dust particles that were thought, but not proved, to originate in comets. Although the dust returned by an earlier mission has provided detailed mineralogy of particles from comet 81P/Wild, the fine-grained aggregate component was strongly modified during collection. Here we report in situ measurements of dust particles at comet 67P/Churyumov-Gerasimenko. The particles are aggregates of smaller, elongated grains, with structures at distinct sizes indicating hierarchical aggregation. Topographic images of selected dust particles with sizes of one micrometre to a few tens of micrometres show a variety of morphologies, including compact single grains and large porous aggregate particles, similar to chondritic porous interplanetary dust particles. The measured grain elongations are similar to the value inferred for interstellar dust and support the idea that such grains could represent a fraction of the building blocks of comets. In the subsequent growth phase, hierarchical agglomeration could be a dominant process and would produce aggregates that stick more easily at higher masses and velocities than homogeneous dust particles. The presence of hierarchical dust aggregates in the near-surface of the nucleus of comet 67P also provides a mechanism for lowering the tensile strength of the dust layer and aiding dust release. △ Less

Submitted 3 April, 2017; originally announced April 2017.

Journal ref: Nature 537, 73-75 (2016)

A Polyethylene-B4C based concrete for enhanced neutron shielding at neutron research facilities

Authors: D. D. DiJulio, C. P. Cooper-Jensen, H. Perrey, K. Fissum, E. Rofors, J. Scherzinger, P. M. Bentley

Abstract: We present the development of a specialized concrete for neutron shielding at neutron research facilities, based on the addition of hydrogen atoms in the form of polyethylene and also B$_{4}$C for enhancing the neutron capture properties of the concrete. We show information on the mechanical properties of the concrete and the neutronics, in particular it's relevance to modern spallation neutron so… ▽ More We present the development of a specialized concrete for neutron shielding at neutron research facilities, based on the addition of hydrogen atoms in the form of polyethylene and also B$_{4}$C for enhancing the neutron capture properties of the concrete. We show information on the mechanical properties of the concrete and the neutronics, in particular it's relevance to modern spallation neutron sources, such as the European Spallation Source (ESS), currently under construction in Lund, Sweden. The new concrete exhibits a 15% lower mass density, a compressible strength of 50% relative to a standard concrete and a significant increase in performance of shielding against MeV neutrons and lower energies. The concrete could find application at the ESS in for example common shielding components, individual beamline shielding and instrument caves. Initial neutronic tests of the concrete, carried out at Lund University, have also verified the performance in the MeV neutron energy range and the results are presented. △ Less

Submitted 4 July, 2017; v1 submitted 6 March, 2017; originally announced March 2017.

Comments: This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/

Journal ref: Nuclear Instruments and Methods in Physics Research A 859 (2017) 41-46

Cost Optimisation of an Instrument Suite at an Accelerator-Driven Spallation Source

Authors: P. M. Bentley, C. S. Zendler, O. Kirstein

Abstract: This artcile presents an optimisation of performance and cost of neutron scattering instrumentation at the European Spallation Source. This is done by trading detailed cost functions against beam transmission functions in a multi-dimensional, yet simple, parameter space. On the one hand, the neutron guide cost increases as a power of the desired beam divergence, and inversely with the minimum wave… ▽ More This artcile presents an optimisation of performance and cost of neutron scattering instrumentation at the European Spallation Source. This is done by trading detailed cost functions against beam transmission functions in a multi-dimensional, yet simple, parameter space. On the one hand, the neutron guide cost increases as a power of the desired beam divergence, and inversely with the minimum wavelength, due to the supermirror coating needed. On the other hand, the more neutrons are transported to the instrument the greater are the shielding costs to deal with the gamma rays that result from the eventual absorption of the neutrons. There are additional factors in that many of the parameters defining the neutron guide geometry are continuous variables, and the straightness of the guide increases the transmission of high energy spallation products, which affect the specifications of particularly heavy hardware, such as heavy shutters and additional shielding, beam stops etc. Over the suite of 16 instruments, a maximum potential cost saving is identified in the vicinity of 20 M\euro \,, with negligible penalties on instrument performance and bandwidth, by trading minimum neutron wavelength $λ$ against total optical costs and shielding costs. Finally, these cost calculations are shown to be consistent with those at real world, existing spallation source facilities. △ Less

Submitted 18 March, 2016; v1 submitted 1 March, 2016; originally announced March 2016.

MIDAS: Lessons learned from the first spaceborne atomic force microscope

Authors: Mark S. Bentley, Herman Arends, Bart Butler, Jose Gavira, Harald Jeszenszky, Thurid Mannel, Jens Romstedt, Roland Schmied, Klaus Torkar

Abstract: The Micro-Imaging Dust Analysis System (MIDAS) atomic force microscope (AFM) onboard the Rosetta orbiter was the first such instrument launched into space in 2004. Designed only a few years after the technique was invented, MIDAS is currently orbiting comet 67P Churyumov-Gerasimenko and producing the highest resolution 3D images of cometary dust ever made in situ. After more than a year of continu… ▽ More The Micro-Imaging Dust Analysis System (MIDAS) atomic force microscope (AFM) onboard the Rosetta orbiter was the first such instrument launched into space in 2004. Designed only a few years after the technique was invented, MIDAS is currently orbiting comet 67P Churyumov-Gerasimenko and producing the highest resolution 3D images of cometary dust ever made in situ. After more than a year of continuous operation much experience has been gained with this novel instrument. Coupled with operations of the Flight Spare and advances in terrestrial AFM a set of "lessons learned" has been produced, cumulating in recommendations for future spaceborne atomic force microscopes. The majority of the design could be reused as-is, or with incremental upgrades to include more modern components (e.g. the processor). Key additional recommendations are to incorporate an optical microscope to aid the search for particles and image registration, to include a variety of cantilevers (with different spring constants) and a variety of tip geometries. △ Less

Submitted 13 February, 2016; originally announced February 2016.

Comments: To be published in Acta Astronautica

Journal ref: Acta Astronautica 125 (2016) 11-21

In-Beam Background Suppression Shield

Authors: V. Santoro, X. X. Cai, D. D. DiJulio, S. Ansell, P. M. Bentley

Abstract: The long (3ms) proton pulse of the European Spallation Source (ESS) gives rise to unique and potentially high backgrounds for the instrument suite. In such a source an instrument capabilities will be limited by it's Signal to Noise (S/N) ratio. The instruments with a direct view of the moderator, which do not use a bender to help mitigate the fast neutron background, are the most challenging. For… ▽ More The long (3ms) proton pulse of the European Spallation Source (ESS) gives rise to unique and potentially high backgrounds for the instrument suite. In such a source an instrument capabilities will be limited by it's Signal to Noise (S/N) ratio. The instruments with a direct view of the moderator, which do not use a bender to help mitigate the fast neutron background, are the most challenging. For these beam lines we propose the innovative shielding of placing blocks of material directly into the guide system, which allow a minimum attenuation of the cold and thermal fluxes relative to the background suppression. This shielding configuration has been worked into a beam line model using Geant4. We study particularly the advantages of single crystal sapphire and silicon blocks . △ Less

Submitted 14 December, 2015; originally announced December 2015.

Comments: 12 pages, 8 figures, proceeding of NDS 2015, 4th International Workshop on Neutron Delivery Systems, 28 -30 September 2015, ILL Grenoble, France

MeV Neutron Production from Thermal Neutron Capture in {6}^Li Simulated with Geant4

Authors: Valentina Santoro, Douglas D. Di Julio, Phillip M. Bentley

Abstract: Various Li compounds are commonly used at neutron facilities as neutron absorbers. These compounds provide one of the highest ratios of neutron attenuation to $γ$-ray production. Unfortunately, the usage of these compounds can also give rise to fast neutron emission with energies up to almost 16 MeV. Historically, some details in this fast neutron production mechanism can be absent from some model… ▽ More Various Li compounds are commonly used at neutron facilities as neutron absorbers. These compounds provide one of the highest ratios of neutron attenuation to $γ$-ray production. Unfortunately, the usage of these compounds can also give rise to fast neutron emission with energies up to almost 16 MeV. Historically, some details in this fast neutron production mechanism can be absent from some modeling packages under some optimization scenarios. In this work, we tested Geant4 to assess the performance of this simulation toolkit for the fast neutron generation mechanism. We compare the results of simulations performed with Geant4 to available measurements. The outcome of our study shows that results of the Geant4 simulations are in good agreement with the available measurements for $^6$Li fast neutron production, and suitable for neutron instrument background evaluation at spallation neutron sources. △ Less

Submitted 27 October, 2015; originally announced October 2015.

Comments: 6 pages, 3 figures, Proceeding of The Sixth European Conference on Neutron Scattering, Zaragoza Spain, August 30 to September 4 2015

Generic guide concepts for the European Spallation Source

Authors: C. Zendler, D. Martin Rodriguez, P. M. Bentley

Abstract: The construction of the European Spallation Source (ESS) faces many challenges from the neutron beam transport point of view: The spallation source is specified as being driven by a 5 MW beam of protons, each with 2 GeV energy, and yet the requirements in instrument background suppression relative to measured signal vary between 10$^{-6}$ and 10$^{-8}$. The energetic particles, particularly above… ▽ More The construction of the European Spallation Source (ESS) faces many challenges from the neutron beam transport point of view: The spallation source is specified as being driven by a 5 MW beam of protons, each with 2 GeV energy, and yet the requirements in instrument background suppression relative to measured signal vary between 10$^{-6}$ and 10$^{-8}$. The energetic particles, particularly above 20 MeV, which are expected to be produced in abundance in the target, have to be filtered in order to make the beamlines safe, operational and provide good quality measurements with low background. We present generic neutron guides of short and medium length instruments which are optimized for good performance at minimal cost. Direct line of sight to the source is avoided twice, with either the first point out of line of sight or both being inside the bunker (20\,m) to minimize shielding costs. These guide geometries are regarded as a baseline to define standards for instruments to be constructed at ESS. They are used to find commonalities and develop principles and solutions for common problems. Lastly, we report the impact of employing the over-illumination concept to mitigate losses from random misalignment passively, and that over-illumination should be used sparingly in key locations to be effective. For more widespread alignment issues, a more direct, active approach is likely to be needed. △ Less

Submitted 1 October, 2015; originally announced October 2015.

Journal ref: Nuclear Instruments and Methods in Physics Research Section A: Accelerators, Spectrometers, Detectors and Associated Equipment, Volume 803, 11 December 2015, Pages 89-99

Overcoming High Energy Backgrounds at Pulsed Spallation Sources

Authors: Nataliia Cherkashyna, Richard J. Hall-Wilton, Douglas D. DiJulio, Anton Khaplanov, Dorothea Pfeiffer, Julius Scherzinger, Carsten P. Cooper-Jensen, Kevin G. Fissum, Stuart Ansell, Erik B. Iverson, Georg Ehlers, Franz X. Gallmeier, Tobias Panzner, Emmanouela Rantsiou, Kalliopi Kanaki, Uwe Filges, Thomas Kittelmann, Maddi Extegarai, Valentina Santoro, Oliver Kirstein, Phillip M. Bentley

Abstract: Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which ca… ▽ More Instrument backgrounds at neutron scattering facilities directly affect the quality and the efficiency of the scientific measurements that users perform. Part of the background at pulsed spallation neutron sources is caused by, and time-correlated with, the emission of high energy particles when the proton beam strikes the spallation target. This prompt pulse ultimately produces a signal, which can be highly problematic for a subset of instruments and measurements due to the time-correlated properties, and different to that from reactor sources. Measurements of this background have been made at both SNS (ORNL, Oak Ridge, TN, USA) and SINQ (PSI, Villigen, Switzerland). The background levels were generally found to be low compared to natural background. However, very low intensities of high-energy particles have been found to be detrimental to instrument performance in some conditions. Given that instrument performance is typically characterised by S/N, improvements in backgrounds can both improve instrument performance whilst at the same time delivering significant cost savings. A systematic holistic approach is suggested in this contribution to increase the effectiveness of this. Instrument performance should subsequently benefit. △ Less

Submitted 10 January, 2015; originally announced January 2015.

Comments: 12 pages, 8 figures. Proceedings of ICANS XXI (International Collaboration on Advanced Neutron Sources), Mito, Japan. 2014

Warp2: A Method of Email and Messaging with Encrypted Addressing and Headers

Authors: H. Bjorgvinsdottir, P. M. Bentley

Abstract: Secure communications are playing increasing roles in society, particularly in finance, journalism, and military projects. Current methods of securing e-mail and similar messaging methods rely on encryption of the message body, but the header with addressing information remains plaintext. This allows third party eavesdroppers to collect and analyse the header metadata and construct a network model… ▽ More Secure communications are playing increasing roles in society, particularly in finance, journalism, and military projects. Current methods of securing e-mail and similar messaging methods rely on encryption of the message body, but the header with addressing information remains plaintext. This allows third party eavesdroppers to collect and analyse the header metadata and construct a network model of the participants in conversations (who, where, when, subject). In this article, we describe a method of communication where the header is also encrypted, hindering the assembly of the communication network models, which is verified with a working prototype application. This provides a useful tool to journalists and proponents of free speech in oppressed countries, protecting both the messages and their sources. △ Less

Submitted 24 November, 2014; originally announced November 2014.

Mirror Energy Differences at Large Isospin Studied through Direct Two-Nucleon Knockout

Authors: P. J. Davies, M. A. Bentley, T. W. Henry, E. C. Simpson, A. Gade, S. M. Lenzi, T. Baugher, D. Bazin, J. S. Berryman, A. M. Bruce, C. Aa. Diget, H. Iwasaki, A. Lemasson, S. McDaniel, D. R. Napoli, A. Ratkiewicz, L. Scruton, A. Shore, R. Stroberg, J. A. Tostevin, D. Weisshaar, K. Wimmer, R. Winkler

Abstract: The first spectroscopy of excited states in 52Ni (Tz=2) and 51Co (Tz=-3/2) has been obtained using the highly selective two-neutron knockout reaction. Mirror energy differences between isobaric analogue states in these nuclei and their mirror partners are interpreted in terms of isospin nonconserving effects. A comparison between large scale shell-model calculations and data provides the most comp… ▽ More The first spectroscopy of excited states in 52Ni (Tz=2) and 51Co (Tz=-3/2) has been obtained using the highly selective two-neutron knockout reaction. Mirror energy differences between isobaric analogue states in these nuclei and their mirror partners are interpreted in terms of isospin nonconserving effects. A comparison between large scale shell-model calculations and data provides the most compelling evidence to date that both electromagnetic and an additional isospin nonconserving interactions for J=2 couplings, of unknown origin, are required to obtain good agreement. △ Less

Submitted 6 August, 2013; originally announced August 2013.

Comments: Accepted for publication in Physical Review Letters

Spectroscopy of proton-rich 66^Se up to J^π = 6^+: isospin-breaking effect in the A = 66 isobaric triplet

Authors: P. Ruotsalainen, D. G. Jenkins, M. A. Bentley, K. Auranen, P. J. Davies, T. Grahn, P. T. Greenlees, J. Henderson, A. Herzáň, U. Jakobsson, P. Joshi, R. Julin, S. Juutinen, J. Konki, M. Leino, G. Lotay, A. J. Nichols, A. Obertelli, J. Pakarinen, J. Partanen, P. Peura, P. Rahkila, M. Sandzelius, J. Sarén, C. Scholey , et al. (4 additional authors not shown)

Abstract: Candidates for three excited states in the 66^Se have been identified using the recoil-β tagging method together with a veto detector for charged-particle evaporation channels. These results allow a comparison of mirror and triplet energy differences between analogue states across the A = 66 triplet as a function of angular momentum. The extracted triplet energy differences follow the negative tre… ▽ More Candidates for three excited states in the 66^Se have been identified using the recoil-β tagging method together with a veto detector for charged-particle evaporation channels. These results allow a comparison of mirror and triplet energy differences between analogue states across the A = 66 triplet as a function of angular momentum. The extracted triplet energy differences follow the negative trend observed in the f_7/2 shell. Shell-model calculations indicate a continued need for an additional isospin non-conserving interaction in addition to the Coulomb isotensor part as a function of mass. △ Less

Submitted 19 July, 2013; originally announced July 2013.

Comments: Submitted to Physical Review Letters on Jul. 18, 2013. 5 pages, 3 figures

Correction of Optical Aberrations in Elliptic Neutron Guides

Authors: Phillip M. Bentley, Shane J. Kennedy, Ken H. Andersen, Damian Martin Rodriguez, David F. R. Mildner

Abstract: Modern, nonlinear ballistic neutron guides are an attractive concept in neutron beam delivery and instrumentation, because they offer increased performance over straight or linearly tapered guides. However, like other ballistic geometries they have the potential to create significantly non-trivial instrumental resolution functions. We address the source of the most prominent optical aberration, na… ▽ More Modern, nonlinear ballistic neutron guides are an attractive concept in neutron beam delivery and instrumentation, because they offer increased performance over straight or linearly tapered guides. However, like other ballistic geometries they have the potential to create significantly non-trivial instrumental resolution functions. We address the source of the most prominent optical aberration, namely coma, and we show that for extended sources the off-axis rays have a different focal length from on-axis rays, leading to multiple reflections in the guide system. We illustrate how the interplay between coma, sources of finite size, and mirrors with non-perfect reflectivity can therefore conspire to produce uneven distributions in the neutron beam divergence, the source of complicated resolution functions. To solve these problems, we propose a hybrid elliptic-parabolic guide geometry. Using this new kind of neutron guide shape, it is possible to condition the neutron beam and remove almost all of the aberrations, whilst providing the same performance in beam current as a standard elliptic neutron guide. We highlight the positive implications for a number of neutron scattering instrument types that this new shape can bring. △ Less

Submitted 20 January, 2012; originally announced January 2012.

Comments: Presented at NOP2010 Conference in Alpe d'Huez, France, in March 2010

AGATA - Advanced Gamma Tracking Array

Authors: S. Akkoyun, A. Algora, B. Alikhani, F. Ameil, G. de Angelis, L. Arnold, A. Astier, A. Ataç, Y. Aubert, C. Aufranc, A. Austin, S. Aydin, F. Azaiez, S. Badoer, D. L. Balabanski, D. Barrientos, G. Baulieu, R. Baumann, D. Bazzacco, F. A. Beck, T. Beck, P. Bednarczyk, M. Bellato, M. A. Bentley, G. Benzoni , et al. (329 additional authors not shown)

Abstract: The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the… ▽ More The Advanced GAmma Tracking Array (AGATA) is a European project to develop and operate the next generation gamma-ray spectrometer. AGATA is based on the technique of gamma-ray energy tracking in electrically segmented high-purity germanium crystals. This technique requires the accurate determination of the energy, time and position of every interaction as a gamma ray deposits its energy within the detector volume. Reconstruction of the full interaction path results in a detector with very high efficiency and excellent spectral response. The realization of gamma-ray tracking and AGATA is a result of many technical advances. These include the development of encapsulated highly-segmented germanium detectors assembled in a triple cluster detector cryostat, an electronics system with fast digital sampling and a data acquisition system to process the data at a high rate. The full characterization of the crystals was measured and compared with detector-response simulations. This enabled pulse-shape analysis algorithms, to extract energy, time and position, to be employed. In addition, tracking algorithms for event reconstruction were developed. The first phase of AGATA is now complete and operational in its first physics campaign. In the future AGATA will be moved between laboratories in Europe and operated in a series of campaigns to take advantage of the different beams and facilities available to maximize its science output. The paper reviews all the achievements made in the AGATA project including all the necessary infrastructure to operate and support the spectrometer. △ Less

Submitted 17 September, 2012; v1 submitted 24 November, 2011; originally announced November 2011.

Comments: This version contains a correction of a ty** error in the caption of Fig. 2. The DOI to the article published in Nucl. Instr. Meth A was also added

A Chiral Paramagnetic Skyrmion-like Phase in MnSi

Authors: C. Pappas, E. Lelievre-Berna, P. Falus, P. M. Bentley, E. Moskvin, S. Grigoriev, P. Fouquet, B. Farago

Abstract: We present a comprehensive study of chiral fluctuations in the reference helimagnet MnSi by polarized neutron scattering and Neutron Spin Echo spectroscopy, which reveals the existence of a completely left-handed and dynamically disordered phase. This phase may be identified as a spontaneous skyrmion phase: it appears in a limited temperature range just above the helical transition Tc and coexis… ▽ More We present a comprehensive study of chiral fluctuations in the reference helimagnet MnSi by polarized neutron scattering and Neutron Spin Echo spectroscopy, which reveals the existence of a completely left-handed and dynamically disordered phase. This phase may be identified as a spontaneous skyrmion phase: it appears in a limited temperature range just above the helical transition Tc and coexists with the helical phase at Tc. △ Less

Submitted 22 April, 2009; v1 submitted 20 February, 2009; originally announced February 2009.

Comments: PRL accepted

Beta-delayed proton decay of proton-rich nuclei 23Al and 31Cl and explosive H-burning in classical novae

Authors: L. Trache, A. Banu, J. C. Hardy, V. E. Iacob, M. McCleskey, E. Simmons, G. Tabacaru, R. E. Tribble, J. Aysto, A. Jokinen, A. Saastamoinen, M. A. Bentley, D. Jenkins, T. Davinson, P. J. Woods, N. L. Achouri, B. Roeder

Abstract: We have developed a technique to measure beta-delayed proton decay of proton-rich nuclei produced and separated with the MARS recoil spectrometer of Texas A&M University. The short-lived radioactive species are produced in-flight, separated, then slowed down (from about 40 MeV/u) and implanted in the middle of very thin Si detectors. The beam is pulsed and beta-p decay of the pure sources collec… ▽ More We have developed a technique to measure beta-delayed proton decay of proton-rich nuclei produced and separated with the MARS recoil spectrometer of Texas A&M University. The short-lived radioactive species are produced in-flight, separated, then slowed down (from about 40 MeV/u) and implanted in the middle of very thin Si detectors. The beam is pulsed and beta-p decay of the pure sources collected in beam is measured between beam pulses. Implantation avoids the problems with detector windows and allows us to measure protons with energies as low as 200 keV from nuclei with lifetimes of 100 ms or less. Using this technique, we have studied the isotopes 23Al and 31Cl, both important for understanding explosive H-burning in novae. They were produced in the reactions 24Mg(p,2n)23Al and 32S(p,2n)31Cl, respectively, in inverse kinematics, from stable beams at 48 and 40 MeV/u, respectively. We give details about the technique, its performances and the results for 23Al and 31Cl beta-p decay. The technique has shown a remarkable selectivity to beta-delayed charged-particle emission and would work even at radioactive beam rates of a few pps. The states populated are resonances for the radiative proton capture reactions 22Na(p,g)23Mg and 30P(p,g)31S, respectively. △ Less

Submitted 3 January, 2009; originally announced January 2009.

Comments: Submitted on Oct. 6, 2008 for the Proceedings of the 10th Symposium on Nuclei in the Cosmos Mackinac Island, Michigan, USA 27 July - 1 August, 2008 Acceptance pending

Coulomb shifts and shape changes in the mass 70 region

Authors: B. S. Nara Singh, A. N. Steer, D. G. Jenkins, R. Wadsworth, M. A. Bentley, P. J. Davies, R. Glover, N. S. Pattabiraman, C. J. Lister, T. Grahn, P. T. Greenlees, P. Jones, R. Julin, S. Juutinen, M. Leino, M. Nyman, J. Pakarinen, P. Rahkila, J. Saren, C. Scholey, J. Sorri, J. Uusitalo, P. A. Butler, M. Dimmock, D. T. Joss , et al. (4 additional authors not shown)

Abstract: The technique of recoil beta tagging has been developed which allows prompt gamma decays in nuclei from excited states to be correlated with electrons from their subsequent short-lived beta decay. This technique is ideal for studying nuclei very far from stability and improves in sensitivity for very short-lived decays and for high decay Q-values. The method has allowed excited states in 78Y to… ▽ More The technique of recoil beta tagging has been developed which allows prompt gamma decays in nuclei from excited states to be correlated with electrons from their subsequent short-lived beta decay. This technique is ideal for studying nuclei very far from stability and improves in sensitivity for very short-lived decays and for high decay Q-values. The method has allowed excited states in 78Y to be observed for the first time, as well as an extension in the knowledge of T=1 states in 74Rb. From this new information it has been possible to compare Coulomb energy differences (CED) between T=1 states in 70Br/70Se, 74Rb/74Kr, and 78Y/78Sr. The A=70 CED exhibit an anomalous behavior which is inconsistent with all other known CED. This behavior may be accounted for qualitatively in terms of small variations in the Coulomb energy arising from shape changes. △ Less

Submitted 22 June, 2007; originally announced June 2007.

Comments: 10 pages, 2 figures