-
A dormant, overmassive black hole in the early Universe
Authors:
Ignas Juodžbalis,
Roberto Maiolino,
William M. Baker,
Sandro Tacchella,
Jan Scholtz,
Francesco D'Eugenio,
Raffaella Schneider,
Alessandro Trinca,
Rosa Valiante,
Christa DeCoursey,
Mirko Curti,
Stefano Carniani,
Jacopo Chevallard,
Anna de Graaff,
Santiago Arribas,
Jake S. Bennett,
Martin A. Bourne,
Andrew J. Bunker,
Stéphane Charlot,
Brian Jiang,
Sophie Koudmani,
Michele Perna,
Brant Robertson,
Debora Sijacki,
Hannah Übler
, et al. (3 additional authors not shown)
Abstract:
Recent observations have found a large number of supermassive black holes already in place in the first few hundred million years after Big Bang. The channels of formation and growth of these early, massive black holes are not clear, with scenarios ranging from heavy seeds to light seeds experiencing bursts of high accretion rate. Here we present the detection, from the JADES survey, of broad Halp…
▽ More
Recent observations have found a large number of supermassive black holes already in place in the first few hundred million years after Big Bang. The channels of formation and growth of these early, massive black holes are not clear, with scenarios ranging from heavy seeds to light seeds experiencing bursts of high accretion rate. Here we present the detection, from the JADES survey, of broad Halpha emission in a galaxy at z=6.68, which traces a black hole with mass of ~ 4 * 10^8 Msun and accreting at a rate of only 0.02 times the Eddington limit. The host galaxy has low star formation rate (~ 1 Msun/yr, a factor of 3 below the star forming main sequence). The black hole to stellar mass ratio is ~ 0.4, i.e. about 1,000 times above the local relation, while the system is closer to the local relations in terms of dynamical mass and velocity dispersion of the host galaxy. This object is most likely the tip of the iceberg of a much larger population of dormant black holes around the epoch of reionisation. Its properties are consistent with scenarios in which short bursts of super-Eddington accretion have resulted in black hole overgrowth and massive gas expulsion from the accretion disk; in between bursts, black holes spend most of their life in a dormant state.
△ Less
Submitted 6 March, 2024;
originally announced March 2024.
-
Quantitative Profilometric Measurement of Magnetostriction in Thin-Films
Authors:
Hamish Greenall,
Benjamin J. Carey,
Douglas Bulla,
James S. Bennett,
Glen I. Harris,
Fernando Gotardo,
Scott Foster,
Warwick P. Bowen
Abstract:
A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1 ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using S…
▽ More
A DC non-contact method for measuring the magnetostrictive strain in thin-films is demonstrated, achieving a state-of-the-art sensitivity of 0.1 ppm. In this method, an optical profilometer is used to measure the curvature induced in a magnetostrictively coated coverslip under a DC field through phase-sensitive interferometry. From this the magnetostrictive stress and strain are calculated using Stoney's formula. This addresses limitations of conventional techniques that measure magnetostriction based on the deflection of a cantilever under an AC field, which require complex dedicated set-ups and are sensitive to vibrational noise. Further, it reveals information about the anisotropy of the film and allows for the possibility of measuring multiple samples simultaneously. The theoretical sensitivity limits are derived, predicting a shot-noise-limit of 0.01 ppm. The method is implemented to measure the magnetostrictive hysteresis and piezomagnetic coupling of thin-film galfenol. Degradation in film performance is observed above a thickness of 206 nm, alongside a change in coercivity. This prompts investigation into the growth and optimization of galfenol films for use in devices.
△ Less
Submitted 21 November, 2023;
originally announced November 2023.
-
Waveguide-integrated and portable optomechanical magnetometer
Authors:
Fernando Gotardo,
Benjamin J. Carey,
Hamish Greenall,
Glen I. Harris,
Erick Romero,
Douglas Bulla,
Elizabeth M. Bridge,
James S. Bennett,
Scott Foster,
Warwick P. Bowen
Abstract:
Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read out via a suspended optica…
▽ More
Optomechanical magnetometers enable highly sensitive magnetic field sensing. However, all such magnetometers to date have been optically excited and read-out either via free space or a tapered optical fiber. This limits their scalability and integrability, and ultimately their range of applications. Here, we present an optomechanical magnetometer that is excited and read out via a suspended optical waveguide fabricated on the same silicon chip as the magnetometer. Moreover, we demonstrate that thermomechanical noise limited sensitivity is possible using portable electronics and laser. The magnetometer employs a silica microdisk resonator selectively sputtered with a magnetostrictive film of galfenol (FeGa) which induces a resonant frequency shift in response to an external magnetic field. Experimental results reveal the retention of high quality-factor optical whispering gallery mode resonances whilst also demonstrating high sensitivity and dynamic range in ambient conditions. The use of off-the-shelf portable electronics without compromising sensor performance demonstrates promise for applications.
△ Less
Submitted 27 July, 2023;
originally announced July 2023.
-
The growth of the gargantuan black holes powering high-redshift quasars and their impact on the formation of early galaxies and protoclusters
Authors:
Jake S. Bennett,
Debora Sijacki,
Tiago Costa,
Nicolas Laporte,
Callum Witten
Abstract:
High-redshift quasars ($z\gtrsim6$), powered by black holes (BHs) with large inferred masses, imply rapid BH growth in the early Universe. The most extreme examples have inferred masses of $\sim \! 10^9\,$M$_\odot$ at $z = 7.5$ and $\sim \! 10^{10}\,$M$_\odot$ at $z = 6.3$. Such dramatic growth via gas accretion likely leads to significant energy input into the quasar host galaxy and its surroundi…
▽ More
High-redshift quasars ($z\gtrsim6$), powered by black holes (BHs) with large inferred masses, imply rapid BH growth in the early Universe. The most extreme examples have inferred masses of $\sim \! 10^9\,$M$_\odot$ at $z = 7.5$ and $\sim \! 10^{10}\,$M$_\odot$ at $z = 6.3$. Such dramatic growth via gas accretion likely leads to significant energy input into the quasar host galaxy and its surroundings, however few theoretical predictions of the impact of such objects currently exist. We present zoom-in simulations of a massive high-redshift protocluster, with our fiducial FABLE model incapable of reproducing the brightest quasars. With modifications to this model to promote early BH growth, such as earlier seeding and mildly super-Eddington accretion, such `gargantuan' BHs can be formed. With this new model, simulated host dust masses and star formation rates are in good agreement with existing JWST and ALMA data from ultraluminous quasars. We find the quasar is often obscured as it grows, and that strong, ejective feedback is required to have a high probability of detecting the quasar in the rest-frame UV. Fast and energetic quasar-driven winds expel metal-enriched gas, leading to significant metal pollution of the circumgalactic medium (CGM) out to twice the virial radius. As central gas densities and pressures are reduced, we find weaker signals from the CGM in mock X-ray and Sunyaev-Zeldovich maps, whose detection - with proposed instruments such as Lynx, and even potentially presently with ALMA - can constrain quasar feedback.
△ Less
Submitted 8 November, 2023; v1 submitted 19 May, 2023;
originally announced May 2023.
-
Continuous optical-to-mechanical quantum state transfer in the unresolved sideband regime
Authors:
Amy Navarathna,
James S. Bennett,
Warwick P. Bowen
Abstract:
Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the u…
▽ More
Optical-to-mechanical quantum state transfer is an important capability for future quantum networks, quantum communication, and distributed quantum sensing. However, existing continuous state transfer protocols operate in the resolved sideband regime, necessitating a high-quality optical cavity and a high mechanical resonance frequency. Here, we propose a continuous protocol that operates in the unresolved sideband regime. The protocol is based on feedback cooling, can be implemented with current technology, and is able to transfer non-Gaussian quantum states with high fidelity. Our protocol significantly expands the kinds of optomechanical devices for which continuous optical-to-mechanical state transfer is possible, paving the way towards quantum technological applications and the preparation of macroscopic superpositions to test the fundamentals of quantum science.
△ Less
Submitted 10 January, 2023;
originally announced January 2023.
-
The chemical enrichment in the early Universe as probed by JWST via direct metallicity measurements at z~8
Authors:
M. Curti,
F. D'Eugenio,
S. Carniani,
R. Maiolino,
L. Sandles,
J. Witstok,
W. M. Baker,
J. S. Bennett,
J. M. Piotrowska,
S. Tacchella,
S. Charlot,
K. Nakajima,
G. Maheson,
F. Mannucci,
A. Amiri,
S. Arribas,
F. Belfiore,
N. R. Bonaventura,
A. J. Bunker,
J. Chevallard,
G. Cresci,
E. Curtis-Lake,
C. Hayden-Pawson,
N. Kumari,
I. Laseter
, et al. (8 additional authors not shown)
Abstract:
We analyse the chemical properties of three z~8 galaxies behind the galaxy cluster SMACS J0723.3-7327, observed as part of the Early Release Observations programme of the James Webb Space Telescope (JWST). Exploiting [O III]4363 auroral line detections in NIRSpec spectra, we robustly apply the direct Te method for the very first time at such high redshift, measuring metallicities ranging from extr…
▽ More
We analyse the chemical properties of three z~8 galaxies behind the galaxy cluster SMACS J0723.3-7327, observed as part of the Early Release Observations programme of the James Webb Space Telescope (JWST). Exploiting [O III]4363 auroral line detections in NIRSpec spectra, we robustly apply the direct Te method for the very first time at such high redshift, measuring metallicities ranging from extremely metal poor (12+log(O/H)~7) to about one-third solar. We also discuss the excitation properties of these sources, and compare them with local strong-line metallicity calibrations. We find that none of the considered diagnostics match simultaneously the observed relations between metallicity and strong-line ratios for the three sources, implying that a proper re-assessment of the calibrations may be needed at these redshifts. On the mass-metallicity plane, the two galaxies at z~7.6 (log(M*/M_sun) = 8.1, 8.7) have metallicities that are consistent with the extrapolation of the mass-metallicity relation at z~2-3, while the least massive galaxy at z~8.5 (log(M*/M_sun) = 7.8) shows instead a significantly lower metallicity . The three galaxies show different level of offset relative to the Fundamental Metallicity Relation, with two of them (at z~7.6) being marginally consistent, while the z~8.5 source deviating significantly, being probably far from the smooth equilibrium between gas flows, star formation and metal enrichment in place at later epochs.
△ Less
Submitted 26 September, 2022; v1 submitted 25 July, 2022;
originally announced July 2022.
-
A disturbing FABLE of mergers, feedback, turbulence, and mass biases in simulated galaxy clusters
Authors:
Jake S. Bennett,
Debora Sijacki
Abstract:
The use of galaxy clusters as cosmological probes often relies on understanding the properties and evolution of the intracluster medium (ICM). However, the ICM is a complex plasma, regularly stirred by mergers and feedback, with non-negligible bulk and turbulent motions and a non-thermal pressure component, making it difficult to construct a coherent and comprehensive picture. To this end, we use…
▽ More
The use of galaxy clusters as cosmological probes often relies on understanding the properties and evolution of the intracluster medium (ICM). However, the ICM is a complex plasma, regularly stirred by mergers and feedback, with non-negligible bulk and turbulent motions and a non-thermal pressure component, making it difficult to construct a coherent and comprehensive picture. To this end, we use the FABLE simulations to investigate how the hydrostatic mass bias is affected by mergers, turbulence, and feedback. Following in detail a single, massive cluster we find the bias varies significantly over cosmic time, rarely staying at the average value found at a particular epoch. Variations of the bias at a given radius are contemporaneous with periods where outflows dominate the mass flux, either due to mergers or interestingly, at high redshift, AGN feedback. The $z=0$ ensemble median mass bias in FABLE is $\sim\!13$ per cent at $R_\mathrm{500}$ and $\sim\!15$ per cent at $R_\mathrm{200}$, but with a large scatter in individual values. In halo central regions, we see an increase in temperature and a decrease in non-thermal pressure support with cosmic time as turbulence thermalises, leading to a reduction in the mass bias within $\sim\!0.2 \, R_\mathrm{200}$. When using a fitted pressure profile, instead of the simulation data, to estimate the bias, we find there can be significant differences, particularly at larger radii and higher redshift. We therefore caution over the use of such fits in future work when comparing with the next generation of X-ray and SZ observations.
△ Less
Submitted 28 April, 2022; v1 submitted 14 October, 2021;
originally announced October 2021.
-
Measurement-based preparation of non-Markovian and multimode mechanical states
Authors:
Chao Meng,
George A. Brawley,
Soroush Khademi,
Elizabeth M. Bridge,
James S. Bennett,
Warwick P. Bowen
Abstract:
Nanomechanical resonators are a key tool for future quantum technologies such as quantum force sensors and interfaces, and for studies of macroscopic quantum physics. The ability to prepare room temperature non-classical states is a major outstanding challenge. Here, we explore the use of measurement-based state conditioning to achieve this. We demonstrate conditional cooling of a nanomechanical r…
▽ More
Nanomechanical resonators are a key tool for future quantum technologies such as quantum force sensors and interfaces, and for studies of macroscopic quantum physics. The ability to prepare room temperature non-classical states is a major outstanding challenge. Here, we explore the use of measurement-based state conditioning to achieve this. We demonstrate conditional cooling of a nanomechanical resonator that has non-Markovian decoherence, and show theoretically that the non-Markovianity makes quantum squeezing significantly easier to achieve. We further show that collective measurement of multiple resonator modes improves the quality of state preparation. This allows us to achieve collective thermomechanical squeezing, in experiments that go beyond the validity of the rotating-wave approximation. Our modelling shows that non-Markovianity and multimode conditioning can both enable room temperature quantum squeezing with existing technology. Together, our results pave the way towards realising room temperature quantum nanomechanical devices and towards their application in quantum technology and fundamental science.
△ Less
Submitted 27 September, 2021;
originally announced September 2021.
-
Precision Magnetometers for Aerospace Applications
Authors:
James S. Bennett,
Brian E. Vyhnalek,
Hamish Greenall,
Elizabeth M. Bridge,
Fernando Gotardo,
Stefan Forstner,
Glen I. Harris,
Félix A. Miranda,
Warwick P. Bowen
Abstract:
Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scient…
▽ More
Aerospace technologies are crucial for modern civilization; space-based infrastructure underpins weather forecasting, communications, terrestrial navigation and logistics, planetary observations, solar monitoring, and other indispensable capabilities. Extraplanetary exploration -- including orbital surveys and (more recently) roving, flying, or submersible unmanned vehicles -- is also a key scientific and technological frontier, believed by many to be paramount to the long-term survival and prosperity of humanity. All of these aerospace applications require reliable control of the craft and the ability to record high-precision measurements of physical quantities. Magnetometers deliver on both of these aspects, and have been vital to the success of numerous missions. In this review paper, we provide an introduction to the relevant instruments and their applications. We consider past and present magnetometers, their proven aerospace applications, and emerging uses. We then look to the future, reviewing recent progress in magnetometer technology. We particularly focus on magnetometers that use optical readout, including atomic magnetometers, magnetometers based on quantum defects in diamond, and optomechanical magnetometers. These optical magnetometers offer a combination of field sensitivity, size, weight, and power consumption that allows them to reach performance regimes that are inaccessible with existing techniques. This promises to enable new applications in areas ranging from unmanned vehicles to navigation and exploration.
△ Less
Submitted 30 June, 2021;
originally announced June 2021.
-
Resolving shocks and filaments in galaxy formation simulations: effects on gas properties and star formation in the circumgalactic medium
Authors:
Jake S. Bennett,
Debora Sijacki
Abstract:
There is an emerging consensus that large amounts of gas do not shock heat in the circumgalactic medium (CGM) of massive galaxies, but instead pierce deep into haloes from the cosmic web via filaments. To better resolve this process numerically, we have developed a novel `shock refinement' scheme within the moving mesh code AREPO that adaptively improves resolution around shocks on-the-fly in gala…
▽ More
There is an emerging consensus that large amounts of gas do not shock heat in the circumgalactic medium (CGM) of massive galaxies, but instead pierce deep into haloes from the cosmic web via filaments. To better resolve this process numerically, we have developed a novel `shock refinement' scheme within the moving mesh code AREPO that adaptively improves resolution around shocks on-the-fly in galaxy formation simulations. We apply this to a massive $\sim10^{12}$ M$_\odot$ halo at $z=6$ using the successful FABLE model, increasing the mass resolution by a factor of 512. With better refinement there are significantly more dense, metal-poor and fast-moving filaments and clumps flowing into the halo, leading to a more multiphase CGM. We find a $\sim50$ per cent boost in cool-dense gas mass and a 25 per cent increase in inflowing mass flux. Better resolved accretion shocks cause turbulence to increase dramatically, leading to a doubling in the halo's non-thermal pressure support. Despite much higher thermalisation at shocks with higher resolution, increased cooling rates suppress the thermal energy of the halo. In contrast, the faster and denser filaments cause a significant jump in the bulk kinetic energy of cool-dense gas, while in the hot phase turbulent energy increases by up to $\sim150$ per cent. Moreover, HI covering fractions within the CGM increase by up to 60 per cent. Consequently star formation is spread more widely and we predict a population of metal-poor stars forming within primordial filaments that deep JWST observations may be able to probe.
△ Less
Submitted 24 September, 2020; v1 submitted 17 June, 2020;
originally announced June 2020.
-
Mechanical squeezing via fast continuous measurement
Authors:
Chao Meng,
George A. Brawley,
James S. Bennett,
Michael R. Vanner,
Warwick P. Bowen
Abstract:
We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state coo…
▽ More
We revisit quantum state preparation of an oscillator by continuous linear position measurement. Quite general analytical expressions are derived for the conditioned state of the oscillator. Remarkably, we predict that quantum squeezing is possible outside of both the backaction dominated and quantum coherent oscillation regimes, relaxing experimental requirements even compared to ground-state cooling. This provides a new way to generate non-classical states of macroscopic mechanical oscillators, and opens the door to quantum sensing and tests of quantum macroscopicity at room temperature.
△ Less
Submitted 24 July, 2020; v1 submitted 14 November, 2019;
originally announced November 2019.
-
Rapid mechanical squeezing with pulsed optomechanics
Authors:
James S. Bennett,
Warwick P. Bowen
Abstract:
Mesoscopic mechanical oscillators can be prepared in quantum states and coherently manipulated using the optomechanical interaction. This has recently been used to prepare squeezed mechanical states. However, the scheme used in these experiments relies on slow, dissipative evolution that destroys the system's memory of its initial state. In this paper we propose a protocol based on a sequence of f…
▽ More
Mesoscopic mechanical oscillators can be prepared in quantum states and coherently manipulated using the optomechanical interaction. This has recently been used to prepare squeezed mechanical states. However, the scheme used in these experiments relies on slow, dissipative evolution that destroys the system's memory of its initial state. In this paper we propose a protocol based on a sequence of four pulsed optomechanical interactions. In addition to being coherent, our scheme executes in a time much shorter than a mechanical period. We analyse applications in impulsive force sensing and preservation of continuous-variable quantum information.
△ Less
Submitted 13 November, 2018; v1 submitted 9 July, 2018;
originally announced July 2018.
-
A Quantum Heat Machine from Fast Optomechanics
Authors:
James S. Bennett,
Lars S. Madsen,
Halina Rubinsztein-Dunlop,
Warwick P. Bowen
Abstract:
We consider a thermodynamic machine in which the working fluid is a quantized harmonic oscillator that is controlled on timescales that are much faster than the oscillator period. We find that operation in this `fast' regime allows access to a range of quantum thermodynamical behaviors that are otherwise inaccessible, including heat engine and refrigeration modes of operation, quantum squeezing, a…
▽ More
We consider a thermodynamic machine in which the working fluid is a quantized harmonic oscillator that is controlled on timescales that are much faster than the oscillator period. We find that operation in this `fast' regime allows access to a range of quantum thermodynamical behaviors that are otherwise inaccessible, including heat engine and refrigeration modes of operation, quantum squeezing, and transient cooling to temperatures below that of the cold bath. The machine involves rapid periodic squeezing operations and could potentially be constructed using pulsed optomechanical interactions. The prediction of rich behavior in the fast regime opens up new possibilities for quantum optomechanical machines and quantum thermodynamics.
△ Less
Submitted 4 June, 2020; v1 submitted 25 May, 2017;
originally announced May 2017.
-
A Quantum Optomechanical Interface Beyond the Resolved Sideband Limit
Authors:
James S. Bennett,
Kiran Khosla,
Lars S. Madsen,
Michael R. Vanner,
Halina Rubinsztein-Dunlop,
Warwick P. Bowen
Abstract:
Mechanical oscillators which respond to radiation pressure are a promising means of transferring quantum information between light and matter. Optical--mechanical state swaps are a key operation in this setting. Existing proposals for optomechanical state swap interfaces are only effective in the resolved sideband limit. Here, we show that it is possible to fully and deterministically exchange mec…
▽ More
Mechanical oscillators which respond to radiation pressure are a promising means of transferring quantum information between light and matter. Optical--mechanical state swaps are a key operation in this setting. Existing proposals for optomechanical state swap interfaces are only effective in the resolved sideband limit. Here, we show that it is possible to fully and deterministically exchange mechanical and optical states outside of this limit, in the common case that the cavity linewidth is larger than the mechanical resonance frequency. This high-bandwidth interface opens up a significantly larger region of optomechanical parameter space, allowing generation of non-classical motional states of high-quality, low-frequency mechanical oscillators.
△ Less
Submitted 22 March, 2016; v1 submitted 19 October, 2015;
originally announced October 2015.
-
Coherent control and feedback cooling in a remotely-coupled hybrid atom-optomechanical system
Authors:
James S. Bennett,
Lars S. Madsen,
Mark Baker,
Halina Rubinsztein-Dunlop,
Warwick P Bowen
Abstract:
Cooling to the motional ground state is an important first step in the preparation of nonclassical states of mesoscopic mechanical oscillators. Light-mediated coupling to a remote atomic ensemble has been proposed as a method to reach the ground state for low frequency oscillators. The ground state can also be reached using optical measurement followed by feedback control. Here we investigate the…
▽ More
Cooling to the motional ground state is an important first step in the preparation of nonclassical states of mesoscopic mechanical oscillators. Light-mediated coupling to a remote atomic ensemble has been proposed as a method to reach the ground state for low frequency oscillators. The ground state can also be reached using optical measurement followed by feedback control. Here we investigate the possibility of enhanced cooling by combining these two approaches. The combination, in general, outperforms either individual technique, though atomic ensemble-based cooling and feedback cooling each individually dominate over large regions of parameter space.
△ Less
Submitted 29 June, 2014; v1 submitted 13 April, 2014;
originally announced April 2014.