-
Highly efficient compact acousto-optic modulator based on a hybrid-lattice hollow core fiber
Authors:
Ricardo E. da Silva,
Jonas H. Osório,
David J. Webb,
Frédéric Gérôme,
Fetah Benabid,
Marcos A. R. Franco,
Cristiano M. B. Cordeiro
Abstract:
We demonstrate the acousto-optic modulation of a hybrid-lattice hollow core fiber (HL-HCF) for the first time. For many years, optical fibers with reduced diameters have been the main solution to increase the interaction of acoustic and optical waves. However, the high drive voltages and large modulator components still employed drastically affect the efficiency and miniaturization of these device…
▽ More
We demonstrate the acousto-optic modulation of a hybrid-lattice hollow core fiber (HL-HCF) for the first time. For many years, optical fibers with reduced diameters have been the main solution to increase the interaction of acoustic and optical waves. However, the high drive voltages and large modulator components still employed drastically affect the efficiency and miniaturization of these devices. Here, we experimentally show that combining Kagomé and tubular lattices in HL-HCFs allows for enhancing the amplification of the acoustic waves and the modulation of the guided optical modes thus providing high modulation efficiency even when using a fiber with a 240 um diameter. To the best of our knowledge, the measured HL-HCF's modulation efficiency (1.3 dB/V) is the highest compared to devices employing reduced diameter fibers. Additionally, we demonstrate a compact acousto-optic modulator with driver dimensions smaller than the HL-HCF diameter. Overall, our results show a promising alternative to solve the compromise of speed, efficiency, and compactness for integration with microscale all-fiber photonic devices.
△ Less
Submitted 2 May, 2024;
originally announced May 2024.
-
Highly efficient interaction of a tubular-lattice hollow-core fiber and flexural acoustic waves: design, characterization and analysis
Authors:
Ricardo E. da Silva,
Jonas H. Osório,
Gabriel L. Rodrigues,
David J. Webb,
Frédéric Gérôme,
Fetah Benabid,
Cristiano M. B. Cordeiro,
Marcos A. R. Franco
Abstract:
The modulation efficiency of a tubular-lattice hollow-core fiber (HCF) by means of flexural acoustic waves is investigated in detail for the first time. The main acousto-optic properties of the HCF are evaluated employing 2D and 3D models based on the finite element method. The induced coupling of the fundamental and first higher-order modes is simulated in the wavelength range from 743 to 1355 nm…
▽ More
The modulation efficiency of a tubular-lattice hollow-core fiber (HCF) by means of flexural acoustic waves is investigated in detail for the first time. The main acousto-optic properties of the HCF are evaluated employing 2D and 3D models based on the finite element method. The induced coupling of the fundamental and first higher-order modes is simulated in the wavelength range from 743 to 1355 nm. Significant acoustic (amplitude, period, strain, energy) and optical parameters (effective index, beat length, birefringence, coupling coefficient) are analyzed. The simulations are compared to experimental results, indicating higher modulation performance in HCFs compared to standard optical fibers. In addition, useful insights into the design and fabrication of all-fiber acousto-optic devices based on HCFs are provided, enabling potential application in tunable spectral filters and mode-locked fiber lasers.
△ Less
Submitted 24 February, 2024;
originally announced February 2024.
-
High-temperature sensing using a hollow-core fiber with thick cladding tubes
Authors:
Gabriel Labes Rodrigues,
Cristiano M. B. Cordeiro,
Foued Amrani,
Frédéric Gérôme,
Fetah Benabid,
Jonas H. Osório
Abstract:
We report on high-temperature sensing measurements using a tubular-lattice hollow-core photonic crystal fiber displaying a microstructure formed of eight 2.4 um-thick cladding tubes. The larger thickness of our fiber's cladding tubes compared to other hollow fibers operating in the visible and infrared ranges entails multiple narrow transmission bands in its transmission spectrum (6 bands in the s…
▽ More
We report on high-temperature sensing measurements using a tubular-lattice hollow-core photonic crystal fiber displaying a microstructure formed of eight 2.4 um-thick cladding tubes. The larger thickness of our fiber's cladding tubes compared to other hollow fibers operating in the visible and infrared ranges entails multiple narrow transmission bands in its transmission spectrum (6 bands in the spectral range between 400 nm and 950 nm) and benefits the realization of the temperature sensing measurements. The principle of operation of our device is based on the thermo-optic effect and thermal expansion-induced spectral shifts of the fiber transmission bands due to temperature variations. To study the sensor operation, we monitored the fiber transmission bands' spectral positions from room temperature to 1085 oC in both ramp-up and ramp-down scenarios. Additionally, we investigated the optimization opportunities by assessing an analytical model describing the fiber transmission characteristics and discussed the alternatives for enhancing the sensor performance. Moreover, our fiber characterization experiments revealed a consistent confinement loss trend aligned with the scaling laws in tubular-lattice hollow-core fibers. We thus understand that the results presented in this manuscript highlight a relevant path for the development of temperature sensors based on microstructured hollow-core optical fibers endowed with thick cladding tubes.
△ Less
Submitted 8 January, 2024;
originally announced January 2024.
-
All-fiber broadband spectral acousto-optic modulation of a tubular-lattice hollow-core optical fiber
Authors:
Ricardo E. da Silva,
Jonas H. Osório,
Gabriel L. Rodrigues,
David J. Webb,
Frédéric Gérôme,
Fetah Benabid,
Cristiano M. B. Cordeiro,
Marcos A. R. Franco
Abstract:
We demonstrate a broadband acousto-optic notch filter based on a tubular-lattice hollow-core fiber for the first time. The guided optical modes are modulated by acoustically induced dynamic long-period gratings along the fiber. The device is fabricated employing a short interaction length (7.7 cm) and low drive voltages (10 V). Modulated spectral bands with 20 nm half-width and maximum depths grea…
▽ More
We demonstrate a broadband acousto-optic notch filter based on a tubular-lattice hollow-core fiber for the first time. The guided optical modes are modulated by acoustically induced dynamic long-period gratings along the fiber. The device is fabricated employing a short interaction length (7.7 cm) and low drive voltages (10 V). Modulated spectral bands with 20 nm half-width and maximum depths greater than 60 % are achieved. The resonant notch wavelength is tuned from 743 to 1355 nm (612 nm span) by changing the frequency of the electrical signal. The results indicate a broader tuning range compared to previous studies using standard and hollow-core fibers. It further reveals unique properties for reconfigurable spectral filters and fiber lasers, pointing to the fast switching and highly efficient modulation of all-fiber photonic devices.
△ Less
Submitted 13 November, 2023;
originally announced November 2023.
-
Fabrication and characterization of iodine photonic microcell for sub-Doppler spectroscopy and laser stabilization
Authors:
Clement Goicoechea,
Thomas Billotte,
Matthieu Chafer,
Martin Maurel,
Jenny Jouin,
Philippe Thomas,
Devang Naik,
Frederic Gerome,
Benoit Debord,
Fetah Benabid
Abstract:
We report on the development of all-fiber stand-alone Iodine-filled Photonic Microcells demonstrating record absorption contrast at room temperature. The microcell s fiber is made of inhibited coupling guiding hollow-core photonic crystal fibers. The fiber-core loading with Iodine was undertaken at 10-1 - 10-2mbar vapor pressure using a novel gas-manifold based on metallic vacuum parts with cerami…
▽ More
We report on the development of all-fiber stand-alone Iodine-filled Photonic Microcells demonstrating record absorption contrast at room temperature. The microcell s fiber is made of inhibited coupling guiding hollow-core photonic crystal fibers. The fiber-core loading with Iodine was undertaken at 10-1 - 10-2mbar vapor pressure using a novel gas-manifold based on metallic vacuum parts with ceramic coated inner surfaces for corrosion resistance. The fiber is then sealed on the tips and mounted on FC/APC connectors for better integration with standard fiber components. The stand-alone microcells display Doppler lines with contrasts up to 73% in the 633nm wavelength range, and an insertion loss between 3 to 4dB. Sub-Doppler spectroscopy based on saturable absorption has been carried out to resolve the hyperfine structure of the P(33)6-3 lines at room temperature with a full-width at half maximum of 24MHz on the b4 component with the help of lock-in amplification. Also, we demonstrate distinguishable hyperfine components on the R(39)6-3 line at room temperature without any recourse to signal-to-noise ratio amplification techniques.
△ Less
Submitted 12 January, 2023;
originally announced January 2023.
-
Hollow-core fiber-based speckle displacement sensor
Authors:
Jonas H. Osório,
Thiago D. Cabral,
Eric Fujiwara,
Marcos A. R. Franco,
Foued Amrani,
Frédéric Delahaye,
Frédéric Gérôme,
Fetah Benabid,
Cristiano M. B. Cordeiro
Abstract:
The research enterprise towards achieving high-performance hollow-core photonic crystal fibers has led to impressive advancements in the latest years. Indeed, using this family of fibers becomes nowadays an overarching strategy for building a multitude of optical systems ranging from beam delivery devices to optical sources and sensors. In most applications, an effective single-mode operation is d…
▽ More
The research enterprise towards achieving high-performance hollow-core photonic crystal fibers has led to impressive advancements in the latest years. Indeed, using this family of fibers becomes nowadays an overarching strategy for building a multitude of optical systems ranging from beam delivery devices to optical sources and sensors. In most applications, an effective single-mode operation is desired and, as such, the fiber microstructure or the light launching setups are typically designed for achieving such a behavior. Alternatively, one can identify the use of large-core multimode hollow-core fibers as a promising avenue for the development of new photonic devices. Thus, in this manuscript, we propose and demonstrate the utilization of a large-core tubular-lattice fiber for accomplishing a speckle-based displacement sensor, which has been built up by inserting and suitably dislocating a single-mode fiber inside the void core of the hollow fiber. The work reported herein encompasses both simulation and experimental studies on the evolution of the multimode intensity distributions within the device as well as the demonstration of a displacement sensor with an estimated resolution of 0.7 μm. We understand that this investigation identifies a new opportunity for the employment of large-core hollow fibers within the sensing framework hence widening the gamut of applications of this family of fibers.
△ Less
Submitted 18 November, 2022;
originally announced November 2022.
-
Hollow-core fibers with reduced surface roughness and ultralow loss in the short-wavelength range
Authors:
Jonas H. Osório,
Foued Amrani,
Frédéric Delahaye,
Ali Dhaybi,
Kostiantyn Vasko,
Fabio Giovanardi,
Damien Vandembroucq,
Gilles Tessier,
Luca Vincetti,
Benoît Debord,
Frédéric Gérôme,
Fetah Benabid
Abstract:
While optical fibers display excellent performances in the infrared, visible and ultraviolet ranges remain poorly addressed by them. Obtaining better fibers for the short-wavelength range has been restricted, in all fiber optics, by scattering processes. In hollow-core fibers, the scattering loss arises from the core roughness and represents the limiting factor in reducing their loss regardless of…
▽ More
While optical fibers display excellent performances in the infrared, visible and ultraviolet ranges remain poorly addressed by them. Obtaining better fibers for the short-wavelength range has been restricted, in all fiber optics, by scattering processes. In hollow-core fibers, the scattering loss arises from the core roughness and represents the limiting factor in reducing their loss regardless of the fiber cladding confinement power. To attain fibers performing at short wavelengths, it is paramount develo** means to minimize the height variations on the fiber microstructure boundaries. Here, we report on the reduction of the core surface roughness of hollow-core fibers by modifying their fabrication technique. In the novel process proposed herein, counter directional gas fluxes are applied within the fiber holes during fabrication to attain an increased shear rate on its microstructure. The effect of the process on the surface roughness has been quantified by optical profilometry and the results showed that the root-mean-square surface roughness has been reduced from 0.40 nm to 0.15 nm. The improvement in the fiber core surface quality entailed fibers with ultralow loss in the short-wavelength range. We report on fibers with record loss values as low as 50 dB/km at 290 nm, 9.7 dB/km at 369 nm, 5.0 dB/km at 480 nm, and 1.8 dB/km at 719 nm. The results reveal this new approach as a promising path for the development of hollow-core fibers guiding at short wavelengths with loss that can potentially be orders of magnitude lower than the ones achievable with their silica-core counterparts.
△ Less
Submitted 22 July, 2022;
originally announced July 2022.
-
Hollow-core photonic crystal fibers for Power-over-Fiber systems
Authors:
Jonas H. Osório,
Joao B. Rosolem,
Fabio R. Bassan,
Foued Amrani,
Frédéric Gérôme,
Fetah Benabid,
Cristiano M. B. Cordeiro
Abstract:
Research achievements in hollow-core photonic crystal fibers technology allow ascertaining such fibers as outstanding platforms for delivering high-power laser beams. Indeed, the key property underlying the success of this family of optical fibers for high-power beam delivery is their capability of efficiently transmitting light through empty space with minimal interaction with the fiber microstru…
▽ More
Research achievements in hollow-core photonic crystal fibers technology allow ascertaining such fibers as outstanding platforms for delivering high-power laser beams. Indeed, the key property underlying the success of this family of optical fibers for high-power beam delivery is their capability of efficiently transmitting light through empty space with minimal interaction with the fiber microstructure. In this context, here we widen the framework of hollow-core fiber-based beam delivery applications by demonstrating their utilization as promising platforms for Power-over-Fiber systems. Thus, we report on the use of a tubular-lattice hollow-core fiber to deliver a watt-level continuous-wave laser beam onto a photovoltaic converter and activate a representative camera circuit. We believe that the experiments reported herein allow identifying hollow-core fibers as eligible candidates for next-generation Power-over-Fiber devices potentially able to lift the power restrictions of current solid-core fiber-based Power-over-Fiber systems.
△ Less
Submitted 5 July, 2022;
originally announced July 2022.
-
Enhancing fiber atom interferometer by in-fiber laser cooling
Authors:
Yu Wang,
Shijie Chai,
Thomas Billotte,
Zilong Chen,
Mingjie Xin,
Wui Seng Leong,
Foued Amrani,
Benoit Debord,
Fetah Benabid,
Shau-Yu Lan
Abstract:
We demonstrate an inertia sensitive atom interferometer optically guided inside a 22-cm-long negative curvature hollow-core photonic crystal fiber with an interferometer time of 20 ms. The result prolongs the previous fiber guided atom interferometer time by three orders of magnitude. The improvement arises from the realization of in-fiber Λ-enhanced gray molasses and delta-kick cooling to cool at…
▽ More
We demonstrate an inertia sensitive atom interferometer optically guided inside a 22-cm-long negative curvature hollow-core photonic crystal fiber with an interferometer time of 20 ms. The result prolongs the previous fiber guided atom interferometer time by three orders of magnitude. The improvement arises from the realization of in-fiber Λ-enhanced gray molasses and delta-kick cooling to cool atoms from 32 μK to below 1 μK in 4 ms. The in-fiber cooling overcomes the inevitable heating during the atom loading process and allows a shallow guiding optical potential to minimize decoherence. Our results permit bringing atoms close to source fields for sensing and could lead to compact inertial quantum sensors with a sub-millimeter resolution.
△ Less
Submitted 19 December, 2021;
originally announced December 2021.
-
Near- and middle-ultraviolet reconfigurable Raman source using a record-low UV/visible transmission loss inhibited-coupling hollow-core fiber
Authors:
M. Chafer,
J. H. Osório,
A. Dhaybi,
F. Ravetta,
F. Amrani,
F. Delahaye,
B. Debord,
C. Cailteau-Fischbach,
G. Ancellet,
F. Gérôme,
F. Benabid
Abstract:
We report on two types of Raman laser sources emitting in the near and middle ultraviolet spectral ranges by the use of a solarization-resilient gas-filled inhibited-coupling (IC) hollow-core photonic-crystal fiber (HCPCF) with record low transmission loss (minimum of 5 dB/km at 480 nm). The first source type emits a Raman comb generated in a hydrogen-filled HCPCF pumped by a 355 nm wavelength mic…
▽ More
We report on two types of Raman laser sources emitting in the near and middle ultraviolet spectral ranges by the use of a solarization-resilient gas-filled inhibited-coupling (IC) hollow-core photonic-crystal fiber (HCPCF) with record low transmission loss (minimum of 5 dB/km at 480 nm). The first source type emits a Raman comb generated in a hydrogen-filled HCPCF pumped by a 355 nm wavelength microchip nanosecond pulsed laser. The generated comb lines span from 270 nm to the near-infrared region with no less than 20 lines in the 270-400 nm wavelength range. The second type stands for the first dual-wavelength Raman source tuned to the ozone absorption band in the ultraviolet. Such dual-wavelength source emits at either 266 nm and 289 nm, or 266 nm and 299 nm. The relative power of the pair components is set to optimize the sensitivity of ozone detection in differential absorption lidar (DIAL). The source's physical package represents more than 10-fold size-reduction relative to current DIAL lasers, thus opening new opportunities in on-field ozone monitoring and map**. Both Raman sources exhibit a very small footprint and are solarization-free.
△ Less
Submitted 24 August, 2021;
originally announced August 2021.
-
Hollow-core fibers with ultralow loss in the ultraviolet range and sub-thermodynamic equilibrium surface-roughness
Authors:
Jonas H. Osório,
Foued Amrani,
Frédéric Delahaye,
Ali Dhaybi,
Kostiantyn Vasko,
Gilles Tessier,
Fabio Giovanardi,
Luca Vincetti,
Benoît Debord,
Frédéric Gérôme,
Fetah Benabid
Abstract:
We report on hollow-core fibers displaying rms core roughness under the surface capillary waves thermodynamic limit and record loss in the short-wavelength range (50.0 dB/km at 290 nm, 9.7 dB/km at 369 nm, 5.0 dB/km at 480 nm, 0.9 dB/km at 558 nm, 1.8 dB/km at 719 nm).
We report on hollow-core fibers displaying rms core roughness under the surface capillary waves thermodynamic limit and record loss in the short-wavelength range (50.0 dB/km at 290 nm, 9.7 dB/km at 369 nm, 5.0 dB/km at 480 nm, 0.9 dB/km at 558 nm, 1.8 dB/km at 719 nm).
△ Less
Submitted 5 May, 2021;
originally announced May 2021.
-
Low-loss single-mode hybrid-lattice hollow-core photonic crystal fiber
Authors:
Foued Amrani,
Jonas H. Osório,
Frédéric Delahaye,
Fabio Giovanardi,
Luca Vincetti,
Benoît Debord,
Frédéric Gérôme,
Fetah Benabid
Abstract:
The remarkable recent demonstrations in ultralow loss Inhibited-Coupling (IC) hollow-core photonic crystal fibers (HCPCFs) place them as serious candidates for the next-generation of long-haul fiber optics systems. A hindrance to this prospect, but also to short-haul applications such as micromachining, where stable and high-quality beam delivery is needed, is the challenge to design and fabricate…
▽ More
The remarkable recent demonstrations in ultralow loss Inhibited-Coupling (IC) hollow-core photonic crystal fibers (HCPCFs) place them as serious candidates for the next-generation of long-haul fiber optics systems. A hindrance to this prospect, but also to short-haul applications such as micromachining, where stable and high-quality beam delivery is needed, is the challenge to design and fabricate an IC-guiding fiber that combines ultra-low loss, truly and robust single-modeness, and polarization-maintaining operation. Design solutions proposed up to now require a trade-off between low loss and truly single modeness. Here, we propose a novel concept of IC HCPCF for obtaining low-loss and effective single-mode operation. The fiber is endowed with a hybrid cladding composed of a Kagome-tubular lattice (HKT). This new concept of microstructured cladding allows to significantly reduce confinement loss and, at the same time, preserving a truly and robust single-mode operation. Experimental results show a HKT-IC-HCPCF with a minimum loss figure of 1.6 dB/km at 1050 nm and a higher-order modes extinction ratio as high as 47.0 dB for a 10 m long fiber. The robustness of the fiber single-modeness was tested by moving the fiber and varying the coupling conditions. The design proposed herein opens a new route for the accomplishment of HCPCFs that combine robust ultralow loss transmission and single-mode beam delivery and provides new insight into the understanding of IC guidance.
△ Less
Submitted 11 June, 2020;
originally announced June 2020.
-
Superradiance from Lattice-Confined Atoms inside Hollow Core Fibre
Authors:
Shoichi Okaba,
Deshui Yu,
Luca Vincetti,
Fetah Benabid,
Hidetoshi Katori
Abstract:
Unravelling superradiance, also known as superfluorescence, relies on an ensemble of phase-matched dipole oscillators and the suppression of inhomogeneous broadening. Here we report on a novel superradiance platform that combines an optical lattice free from the ac Stark shift and a hollow-core photonic crystal fibre, enabling an extended atom-light interaction over $2 \mathrm{mm}$ free from the D…
▽ More
Unravelling superradiance, also known as superfluorescence, relies on an ensemble of phase-matched dipole oscillators and the suppression of inhomogeneous broadening. Here we report on a novel superradiance platform that combines an optical lattice free from the ac Stark shift and a hollow-core photonic crystal fibre, enabling an extended atom-light interaction over $2 \mathrm{mm}$ free from the Doppler effect. This system allows controlling the atom spatial distribution and spectral homogeneity whilst efficiently coupling the radiation field to an optical fibre. The experimentally-observed and theoretically-corroborated temporal, spectral and spatial dynamic behaviours of the superradiance, e.g., superradiance ringing and density-dependent frequency shift, demonstrate a unique interplay between the trapped atoms and the fibre-guided field with multiple transverse modes. Our theory indicates the resulting temporal evolution of the guided light shows a minimal beam radius of $3.1 \mathrm{μm}$ that is three times smaller than that of the lowest-loss fibre mode.
△ Less
Submitted 14 March, 2020;
originally announced March 2020.
-
Raman-free fibered photon-pair source
Authors:
Martin Cordier,
Philippe Delaye,
Frédéric Gérôme,
Fetah Benabid,
Isabelle Zaquine
Abstract:
Raman-scattering noise in silica has been the key obstacle toward the realisation of high quality fiber-based photon-pair sources. Here, we experimentally demonstrate how to get past this limitation by dispersion tailoring a xenon-filled hollow-core photonic crystal fiber. The source operates at room temperature, and is designed to generate Raman-free photon-pairs at useful wavelength ranges, with…
▽ More
Raman-scattering noise in silica has been the key obstacle toward the realisation of high quality fiber-based photon-pair sources. Here, we experimentally demonstrate how to get past this limitation by dispersion tailoring a xenon-filled hollow-core photonic crystal fiber. The source operates at room temperature, and is designed to generate Raman-free photon-pairs at useful wavelength ranges, with idler at the telecom, and signal at a visible range. We achieve a coincidence-to-accidentals ratio (2) as high as 2740 combined with an ultra low heralded g H (0) = 0.002, indicating a very high signal to noise ratio and a negligible multi-photon emission probability. Moreover, by gas-pressure tuning, we demonstrate the control of photon frequencies over a range as large as 13 THz, covering S-C and L telecom band for the idler photon. This work demonstrates that hollow-core photonic crystal fiber is an excellent platform to design high quality photon-pair sources, and could play a driving role in the emerging quantum technology.
△ Less
Submitted 6 January, 2020;
originally announced January 2020.
-
Raman-Kerr Comb Generation Based on Parametric Wave Mixing in Strongly Driven Raman Molecular Gas Medium
Authors:
Aurélien Benoît,
Anton Husakou,
Benoît Beaudou,
Benoît Debord,
Frédéric Gérôme,
Fetah Benabid
Abstract:
We report on experimental and theoretical demonstration of an optical comb spectrum based on a combination of cascaded stimulated Raman scattering and four-wave mixing mediated by Raman-induced nonresonant Kerr-type nonlinearity. This combination enabled to transform a conventional quasi-periodic Raman comb into a comb with a single and smaller frequency spacing. This new phenomenon is realized us…
▽ More
We report on experimental and theoretical demonstration of an optical comb spectrum based on a combination of cascaded stimulated Raman scattering and four-wave mixing mediated by Raman-induced nonresonant Kerr-type nonlinearity. This combination enabled to transform a conventional quasi-periodic Raman comb into a comb with a single and smaller frequency spacing. This new phenomenon is realized using a hollow-core photonic crystal fiber filled with 40 bars of deuterium, and pumped with a high-power picosecond laser. The resultant comb shows more than 100 spectral lines spanning over 220 THz from 800 nm to 1710 nm, with a total output power of 7.1 W. In contrast to a pure Raman comb, a 120 THz wide portion of the spectrum exhibits denser and equally-spaced spectral lines with a frequency spacing of around 1.75 THz, which is much smaller than the lowest frequency of the three excited deuterium Raman resonances. A numerical solution of the generalized nonlinear Schrödinger equation in the slowly varying envelope approximation provides very good agreement with the experimental data. The additional sidebands are explained by cascaded four-wave mixing between pre-existing spectral lines, mediated by the large Raman induced optical nonlinearity. The results open a new route to the generation of optical frequency combs that combine large bandwidth and high power controllable frequency spacing.
△ Less
Submitted 2 October, 2019;
originally announced October 2019.
-
Rotation measurements using a a resonant fiber optic gyroscope based on Kagome fiber
Authors:
A. Ravaille,
G. Feugnet,
B. Debord,
F. Gérôme,
G. Humbert,
F. Benabid,
F. Bretenaker
Abstract:
We build a resonant fiber optic gyro based on Kagome hollow-core fiber. A semi-bulk cavity architecture based on a 18-m-long Kagome fiber permits to achieve a cavity finesse of 23 with a resonance linewidth of 700 kHz. An optimized Pound-Drever-Hall servo-locking scheme is used to probe the cavity in reflection. Closed-loop operation of the gyroscope permits to reach an angular random walk as smal…
▽ More
We build a resonant fiber optic gyro based on Kagome hollow-core fiber. A semi-bulk cavity architecture based on a 18-m-long Kagome fiber permits to achieve a cavity finesse of 23 with a resonance linewidth of 700 kHz. An optimized Pound-Drever-Hall servo-locking scheme is used to probe the cavity in reflection. Closed-loop operation of the gyroscope permits to reach an angular random walk as small as 0.004$^\circ/\sqrt{\mathrm{h}}$ and a bias stability of 0.45$^\circ$/h over 0.5 s of integration time.
△ Less
Submitted 10 December, 2018;
originally announced December 2018.
-
Mid IR hollow core fiber gas laser emitting at 4.6 um
Authors:
F. B. A. Aghbolagh,
V. Nampoothiri,
B. Debord,
F. Gerome,
L. Vincetti,
F. Benabid,
W. Rudolph
Abstract:
Emission at 4.6 um was observed from an N2O filled hollow core fiber laser. 8-ns pump pulses at 1.517 um excited a vibrational overtone resulting in lasing on an R and P branch fundamental transition from the upper pump state. At optimum gas pressure of 80 Torr a photon conversion efficiency of 9% and a slope efficiency of 3% was observed from a mirrorless laser. The laser threshold occurred at an…
▽ More
Emission at 4.6 um was observed from an N2O filled hollow core fiber laser. 8-ns pump pulses at 1.517 um excited a vibrational overtone resulting in lasing on an R and P branch fundamental transition from the upper pump state. At optimum gas pressure of 80 Torr a photon conversion efficiency of 9% and a slope efficiency of 3% was observed from a mirrorless laser. The laser threshold occurred at an absorbed pump energy of 150 nJ in a 45-cm long fiber with 85 μm core diameter. The observed dependence of the laser output on gas pressure is shown to be a result of line broadening and relaxation rates.
△ Less
Submitted 2 November, 2018;
originally announced November 2018.
-
Active engineering of four-wave mixing spectral entanglement in hollow-core fibers
Authors:
Martin Cordier,
Adeline Orieux,
Benoit Debord,
Frédéric Gérome,
Alexandre Gorse,
Matthieu Chafer,
Eleni Diamanti,
Philippe Delaye,
Fetah Benabid,
Isabelle Zaquine
Abstract:
We demonstrate theoretically and experimentally a high level of control of the four-wave mixing process in an inert gas filled inhibited-coupling guiding hollow-core photonic crystal fiber in order to generate photon pairs. The specific multiple-branch dispersion profile in such fibers allows both entangled and separable bi-photon states to be produced. By controlling the choice of gas, its pressu…
▽ More
We demonstrate theoretically and experimentally a high level of control of the four-wave mixing process in an inert gas filled inhibited-coupling guiding hollow-core photonic crystal fiber in order to generate photon pairs. The specific multiple-branch dispersion profile in such fibers allows both entangled and separable bi-photon states to be produced. By controlling the choice of gas, its pressure and the fiber length, we experimentally generate various joint spectral intensity profiles in a stimulated regime that is transferable to the spontaneous regime. The generated profiles cover both spectrally separable and entangled bi-photons and feature frequency tuning over 17 THz, demonstrating the large dynamic control offered by such a photon pair source.
△ Less
Submitted 10 August, 2018; v1 submitted 30 July, 2018;
originally announced July 2018.
-
Tailoring modal properties of inhibited-coupling guiding fibers by cladding modification
Authors:
Jonas H. Osorio,
Matthieu Chafer,
Benoit Debord,
Fabio Giovanardi,
Martin Cordier,
Martin Maurel,
Frederic Delahaye,
Foued Amrani,
Luca Vincetti,
Frederic Gerome,
Fetah Benabid
Abstract:
Understanding cladding properties is crucial for designing microstructured optical fibers. This is particularly acute for Inhibited-Coupling guiding fibers because of the reliance of their core guidance on the core and cladding mode-field overlap integral. Consequently, careful planning of the fiber cladding parameters allows obtaining fibers with optimized characteristics such as low loss and bro…
▽ More
Understanding cladding properties is crucial for designing microstructured optical fibers. This is particularly acute for Inhibited-Coupling guiding fibers because of the reliance of their core guidance on the core and cladding mode-field overlap integral. Consequently, careful planning of the fiber cladding parameters allows obtaining fibers with optimized characteristics such as low loss and broad transmission bandwidth. In this manuscript, we report on how one can tailor the modal properties of hollow-core photonic crystal fibers by adequately modifying the fiber cladding. We show that the alteration of the position of the unity-tubes in the cladding of tubular fibers can alter the loss hierarchy of the modes in these fibers, and exhibit salient polarization propriety. In this context, we present two fibers with different cladding structures which favor propagation of higher order core modes - namely LP11 and LP21 modes. Additionally, we provide discussions on mode transformations in these fibers and show that one can obtain uncommon intensity and polarization profiles at the fiber output. This allows the fiber to act as a mode intensity and polarization shaper. We envisage this novel concept can be useful for a variety of applications such as hollow core fiber based atom optics, atom-surface physics, sensing and nonlinear optics.
△ Less
Submitted 31 July, 2018; v1 submitted 24 July, 2018;
originally announced July 2018.
-
High-efficiency cold-atom transport into a waveguide trap
Authors:
Ashby P. Hilton,
Christopher Perrella,
Fetah Benabid,
Ben M. Sparkes,
Andre N. Luiten,
Philip S. Light
Abstract:
We have developed and characterized an atom-guiding technique that loads $3\times10^6$ cold rubidium atoms into hollow-core optical fibre, an order-of-magnitude larger than previously reported results. This result was possible because it was guided by a physically realistic simulation that could provide the specifications for loading efficiencies of 3% and a peak optical depth of 600. The simulati…
▽ More
We have developed and characterized an atom-guiding technique that loads $3\times10^6$ cold rubidium atoms into hollow-core optical fibre, an order-of-magnitude larger than previously reported results. This result was possible because it was guided by a physically realistic simulation that could provide the specifications for loading efficiencies of 3% and a peak optical depth of 600. The simulation further showed that the demonstrated loading efficiency is limited solely by the geometric overlap of the atom cloud and the optical guide beam, and is thus open to further improvement with experimental modification. The experimental arrangement allows observation of the real-time effects of light-assisted cold atom collisions and background gas collisions by tracking the dynamics of the cold atom cloud as it falls into the fibre. The combination of these observations, and physical understanding from the simulation, allows estimation of the limits to loading cold atoms into hollow-core fibres.
△ Less
Submitted 30 October, 2018; v1 submitted 14 February, 2018;
originally announced February 2018.
-
Rydberg excitation of cold atoms inside a hollow core fiber
Authors:
Maria Langbecker,
Mohammad Noaman,
Niels Kjærgaard,
Fetah Benabid,
Patrick Windpassinger
Abstract:
We report on a versatile, highly controllable hybrid cold Rydberg atom fiber interface, based on laser cooled atoms transported into a hollow core Kagomé crystal fiber. Our experiments are the first to demonstrate the feasibility of exciting cold Rydberg atoms inside a hollow core fiber and we study the influence of the fiber on Rydberg electromagnetically induced transparency (EIT) signals. Using…
▽ More
We report on a versatile, highly controllable hybrid cold Rydberg atom fiber interface, based on laser cooled atoms transported into a hollow core Kagomé crystal fiber. Our experiments are the first to demonstrate the feasibility of exciting cold Rydberg atoms inside a hollow core fiber and we study the influence of the fiber on Rydberg electromagnetically induced transparency (EIT) signals. Using a temporally resolved detection method to distinguish between excitation and loss, we observe two different regimes of the Rydberg excitations: one EIT regime and one regime dominated by atom loss. These results are a substantial advancement towards future use of our system for quantum simulation or information.
△ Less
Submitted 4 October, 2017; v1 submitted 23 June, 2017;
originally announced June 2017.
-
Ultra-low transmission loss (7.7 dB/km at 750 nm) inhibited-coupling guiding hollow-core photonic crystal fibers with a single ring of tubular lattice cladding
Authors:
B. Debord,
A. Amsanpally,
M. Chafer,
A. Baz,
M. Maurel,
J. M Blondy,
E. Hugonnot,
F. Scol,
L. Vincetti,
F. Gerome,
F. Benabid
Abstract:
The advent of photonic bandgap (PBG) guiding hollow- core photonic crystal fiber (HC-PCF) sparked the hope of guiding light with attenuation below the fundamental silica Rayleigh scattering limit (SRSL) of conventional step-index fibers. Unfortunately, the combination of the strong core-cladding optical-overlap, the surface roughness at the silica cladding struts and the presence of interface-mode…
▽ More
The advent of photonic bandgap (PBG) guiding hollow- core photonic crystal fiber (HC-PCF) sparked the hope of guiding light with attenuation below the fundamental silica Rayleigh scattering limit (SRSL) of conventional step-index fibers. Unfortunately, the combination of the strong core-cladding optical-overlap, the surface roughness at the silica cladding struts and the presence of interface-modes limited the lowest reported transmission-loss to 1.2 dB/km at 1550 nm. This hope is recently revived by the introduction of hypocycloid core- contour (i.e. negative curvature) in inhibited-coupling (IC) guiding HC-PCF, and the reduction of their confinement loss to a level that makes them serious contenders for light transmission below the SRSL in UV- VIS-NIR spectral range. Here, we report on several IC guiding HC-PCFs with a hypocycloid core-contour and a cladding structure made of a single ring from a tubular lattice. The fibers guide in the UV-VIS and NIR, and among which we list one with a record transmission loss of 7.7 dB/km at ~750 nm (only a factor ~2 above the SRSL), and a second with an ultra-broad fundamental-band with loss in the range of 10-20 dB/km spanning from 600 to 1200 nm. Both fibers present near-single mode guidance and very low bend loss sensitivity. The results show that the limit in the transmission is set by confinement loss for wavelengths longer than ~1 μm and by surface- roughness for shorter wavelengths, thus indicating that transmission loss well below the SRSL in the visible is possible with a surface roughness reduction and would open the possibility of the first UV low-loss light- guidance.
△ Less
Submitted 5 October, 2016;
originally announced October 2016.
-
A Test Resonator for Kagome Hollow-Core Photonic Crystal Fibers for Resonant Rotation Sensing
Authors:
Ihsan Fsaifes,
Gilles Feugnet,
Alexia Ravaille,
Benoît Debord,
Frédéric Gérôme,
Assaad Baz,
Georges Humbert,
Fetah Benabid,
Sylvain Schwartz,
Fabien Bretenaker
Abstract:
We build ring resonators to assess the potentialities of Kagome Hollow-Core Photonic Crystal Fibers for future applications to resonant rotation sensing. The large mode diameter of Kagome fibers permits to reduce the free space fiber-to-fiber coupling losses, leading to cavities with finesses of about 30 for a diameter equal to 15 cm. Resonance linewidths of 3.2~MHz with contrasts as large as 89\%…
▽ More
We build ring resonators to assess the potentialities of Kagome Hollow-Core Photonic Crystal Fibers for future applications to resonant rotation sensing. The large mode diameter of Kagome fibers permits to reduce the free space fiber-to-fiber coupling losses, leading to cavities with finesses of about 30 for a diameter equal to 15 cm. Resonance linewidths of 3.2~MHz with contrasts as large as 89\% are obtained. Comparison with 7-cell photonic band gap (PBG) fiber leads to better finesse and contrast with Kagome fiber. Resonators based on such fibers are compatible with the angular random walk required for medium to high performance rotation sensing. The small amount of light propagating in silica should also permit to further reduce the Kerr-induced non-reciprocity by at least three orders of magnitudes in 7-cell Kagome fiber compared with 7-cell PBG fiber.
△ Less
Submitted 28 September, 2016; v1 submitted 12 January, 2016;
originally announced January 2016.
-
Ground-state atomic polarization relaxation-time measurement of Rb filled hypocycloidal core-shaped Kagome HC-PCF
Authors:
T. D. Bradley,
E. Ilinova,
J. J. McFerran,
J. Jouin,
B. Debord,
M. Alharbi,
P. Thomas,
F. Gerome,
F. Benabid
Abstract:
We report on the measurement of ground state atomic polarization relaxation tile of Rb vapor confined in five different hypocycloidal core shape Kagome hollow core photonic crystal fibers made with uncoated silica glass. We are able to distinguish between wall-collision and transit-time effects in optical waveguide and deduce the contribution of the atom's dwell time at the core wall surface. In c…
▽ More
We report on the measurement of ground state atomic polarization relaxation tile of Rb vapor confined in five different hypocycloidal core shape Kagome hollow core photonic crystal fibers made with uncoated silica glass. We are able to distinguish between wall-collision and transit-time effects in optical waveguide and deduce the contribution of the atom's dwell time at the core wall surface. In contrast with convetional macroscopic atomic cell configuration, and in agreement with Monte Carlo simulations, the measured relaxation times were found to be at least one order of magnitude longer than the limit set by the atom-wall collisional relaxation from thermal atoms. This extended relaxation time is explained by the combination of a stronger contribution of the slow atoms in the atomic polarization build-up, and of the relatively significant contribution of dwell time to the relaxation process of the ground state polarization.
△ Less
Submitted 1 July, 2015;
originally announced July 2015.
-
Deeply-trapped molecules in self-nanostructured gas-phase material
Authors:
M. Alharbi,
A. Husakou,
B. Debord,
F. Gerome,
F. Benabid
Abstract:
Since the advent of atom laser-cooling, trap** or cooling natural molecules has been a long standing and challenging goal. Here, we demonstrate a method for laser-trap** molecules that is radically novel in its configuration, in its underlined physical dynamics and in its outcomes. It is based on self-optically spatially-nanostructured high pressure molecular hydrogen confined in hollow-core p…
▽ More
Since the advent of atom laser-cooling, trap** or cooling natural molecules has been a long standing and challenging goal. Here, we demonstrate a method for laser-trap** molecules that is radically novel in its configuration, in its underlined physical dynamics and in its outcomes. It is based on self-optically spatially-nanostructured high pressure molecular hydrogen confined in hollow-core photonic-crystal-fibre. An accelerating molecular-lattice is formed by a periodic potential associated with Raman saturation except for a 1-dimentional array of nanometer wide and strongly-localizing sections. In these sections, molecules with a speed of as large as 1800 m/s are trapped, and stimulated Raman scattering in the Lamb-Dicke regime occurs to generate high power forward and backward-Stokes continuous-wave laser with sideband-resolved sub-Doppler emission spectrum. The spectrum exhibits a central line with a sub-recoil linewidth of as low as 14 kHz, more than 5 orders-of-magnitude narrower than in conventional Raman scattering, and sidebands comprising Mollow triplet, molecular motional-sidebands and four-wave-mixing.
△ Less
Submitted 3 June, 2015;
originally announced June 2015.
-
Efficient Spectral Broadening in the 100-W Average Power Regime Using Gas Filled Kagome HC-PCF and Pulse Compression
Authors:
Florian Emaury,
Clara J. Saraceno,
Benoit Debord,
Debashri Ghosh,
Andreas Diebold,
Frederic Gerome,
Thomas Suedmeyer,
Fetah Benabid,
Ursula Keller
Abstract:
We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a Kagome HC-PCF containing 13 bar…
▽ More
We present nonlinear pulse compression of a high-power SESAM-modelocked thin-disk laser (TDL) using an Ar-filled hypocycloid-core Kagome Hollow-Core Photonic Crystal Fiber (HC-PCF). The output of the modelocked Yb:YAG TDL with 127 W average power, a pulse repetition rate of 7 MHz, and a pulse duration of 740 fs was spectrally broadened 16-fold while propagating in a Kagome HC-PCF containing 13 bar of static Argon gas. Subsequent compression tests performed using 8.4% of the full available power resulted in a pulse duration as short as 88 fs using the spectrally broadened output from the fiber. Compressing the full transmitted power through the fiber (118 W) could lead to a compressed output of >100 W of average power and >100 MW of peak power with an average power compression efficiency of 88%. This simple laser system with only one ultrafast laser oscillator and a simple single-pass fiber pulse compressor, generating both high peak power >100 MW and sub-100-fs pulses at megahertz repetition rate, is very interesting for many applications such as high harmonic generation and attosecond science with improved signal-to-noise performance.
△ Less
Submitted 17 October, 2014;
originally announced October 2014.
-
Lamb-Dicke spectroscopy of atoms in a hollow-core photonic crystal fibre
Authors:
Shoichi Okaba,
Tetsushi Takano,
Fetah Benabid,
Tom Bradley,
Luca Vincetti,
Zakhar Maizelis,
Valery Yampol'skii,
Franco Nori,
Hidetoshi Katori
Abstract:
Unlike photons, which are conveniently handled by mirrors and optical fibres without loss of coherence, atoms lose their coherence via atom-atom and atom-wall interactions. This decoherence of atoms deteriorates the performance of atomic clocks and magnetometers, and also hinders their miniaturisation. Here we report a novel platform for precision spectroscopy. Ultracold strontium atoms inside a k…
▽ More
Unlike photons, which are conveniently handled by mirrors and optical fibres without loss of coherence, atoms lose their coherence via atom-atom and atom-wall interactions. This decoherence of atoms deteriorates the performance of atomic clocks and magnetometers, and also hinders their miniaturisation. Here we report a novel platform for precision spectroscopy. Ultracold strontium atoms inside a kKagome-lattice hollow-core photonic crystal fibre (HC-PCF) are transversely confined by an optical lattice to prevent atoms from interacting with the fibre wall. By confining at most one atom in each lattice site, to avoid atom-atom interactions and Doppler effect, a 7.8-kHz-wide spectrum is observed for the $^1 S_0-{}^3P_1$ (m=0) transition. Atoms singly trapped in a magic lattice in hollow-core photonic crystal fibresHC-PCFs improve the optical depth while preserving atomic coherence time.
△ Less
Submitted 4 August, 2014;
originally announced August 2014.
-
High-Effciency Cross-Phase Modulation in a Gas-Filled Waveguide
Authors:
C. Perrella,
P. S. Light,
J. D. Anstie,
F. Benabid,
T. M. Stace,
A. G. White,
A. N. Luiten
Abstract:
Strong cross-Kerr non-linearities have been long sought after for quantum information applications. Recent work has shown that they are intrinsically unreliable in travelling wave configurations: cavity configurations avoid this, but require knowledge of both the non-linearity and the loss. Here we present a detailed systematic study of cross-phase modulation, and absorption, in a rubidium vapour…
▽ More
Strong cross-Kerr non-linearities have been long sought after for quantum information applications. Recent work has shown that they are intrinsically unreliable in travelling wave configurations: cavity configurations avoid this, but require knowledge of both the non-linearity and the loss. Here we present a detailed systematic study of cross-phase modulation, and absorption, in a rubidium vapour confined within a hollow-core photonic crystal fibre. Using a two-photon transition, we observe phase modulations of up to $π$rad with a signal power of 25$μ$W, corresponding to a non-linear Kerr coefficient, $n_2$, of $0.8 \times 10^{-6}$ cm$^2$/W, or $1.3 \times 10^{-6}$ rad per photon.
△ Less
Submitted 18 June, 2013;
originally announced June 2013.
-
Supercritical-Xenon-Filled Hollow-Core Photonic Bandgap Fiber as a Raman-Free, Dispersion-Controllable Nonlinear Optical Medium
Authors:
K. E. Lynch-Klarup,
E. D. Mondloch,
M. G. Raymer,
D. Arrestier,
F. Gerome,
F. Benabid
Abstract:
We propose supercritical xenon in a hollow-core photonic bandgap fiber as a highly nonlinear medium, and demonstrate 200 nm control over the guidance window of the fiber as the xenon goes through its supercritical phase transition. The large optical polarizability and monoatomic nature of xenon are predicted to allow large optical nonlinearity, on the same order as that of fused silica, while main…
▽ More
We propose supercritical xenon in a hollow-core photonic bandgap fiber as a highly nonlinear medium, and demonstrate 200 nm control over the guidance window of the fiber as the xenon goes through its supercritical phase transition. The large optical polarizability and monoatomic nature of xenon are predicted to allow large optical nonlinearity, on the same order as that of fused silica, while maintaining greatly reduced Raman scattering, offering benefits for nonlinear and quantum optics.
△ Less
Submitted 19 June, 2013; v1 submitted 16 November, 2012;
originally announced November 2012.
-
Saturation Spectroscopy of Iodine in Hollow-core Optical Fibre
Authors:
Anna Lurie,
Philip S. Light,
James Anstie,
Thomas M. Stace,
Paul C. Abbott,
Fetah Benabid,
Andre N. Luiten
Abstract:
We present high-resolution spectroscopy of Iodine vapour that is loaded and trapped within the core of a hollow-core photonic crystal fibre (HC-PCF). We compare the observed spectroscopic features to those seen in a conventional iodine cell and show that the saturation characteristics differ significantly. Despite the confined geometry it was still possible to obtain sub-Doppler features with a sp…
▽ More
We present high-resolution spectroscopy of Iodine vapour that is loaded and trapped within the core of a hollow-core photonic crystal fibre (HC-PCF). We compare the observed spectroscopic features to those seen in a conventional iodine cell and show that the saturation characteristics differ significantly. Despite the confined geometry it was still possible to obtain sub-Doppler features with a spectral width of ~6 MHz with very high contrast. We provide a simple theory which closely reproduces all the key observations of the experiment.
△ Less
Submitted 15 March, 2012;
originally announced March 2012.
-
Quantum-Fluctuation-Initiated Coherence in Multi-Octave Raman Optical Frequency Combs
Authors:
Y. Y. Wang,
Chunbai Wu,
F. Couny,
M. G. Raymer,
F. Benabid
Abstract:
We show experimentally and theoretically that the spectral components of a multi-octave frequency comb spontaneously created by stimulated Raman scattering in a hydrogen-filled hollow-core photonic crystal fiber exhibit strong self coherence and mutual coherence within each 12 ns driving laser pulse. This coherence arises in spite of the field's initiation being from quantum zero-point fluctuation…
▽ More
We show experimentally and theoretically that the spectral components of a multi-octave frequency comb spontaneously created by stimulated Raman scattering in a hydrogen-filled hollow-core photonic crystal fiber exhibit strong self coherence and mutual coherence within each 12 ns driving laser pulse. This coherence arises in spite of the field's initiation being from quantum zero-point fluctuations, which causes each spectral component to show large phase and energy fluctuations. This points to the possibility of an optical frequency comb with nonclassical correlations between all comb lines.
△ Less
Submitted 10 August, 2010;
originally announced August 2010.
