-
Real-Time Oil Leakage Detection on Aftermarket Motorcycle Dam** System with Convolutional Neural Networks
Authors:
Federico Bianchi,
Stefano Speziali,
Andrea Marini,
Massimiliano Proietti,
Lorenzo Menculini,
Alberto Garinei,
Gabriele Bellani,
Marcello Marconi
Abstract:
In this work, we describe in detail how Deep Learning and Computer Vision can help to detect fault events of the AirTender system, an aftermarket motorcycle dam** system component. One of the most effective ways to monitor the AirTender functioning is to look for oil stains on its surface. Starting from real-time images, AirTender is first detected in the motorbike suspension system, simulated i…
▽ More
In this work, we describe in detail how Deep Learning and Computer Vision can help to detect fault events of the AirTender system, an aftermarket motorcycle dam** system component. One of the most effective ways to monitor the AirTender functioning is to look for oil stains on its surface. Starting from real-time images, AirTender is first detected in the motorbike suspension system, simulated indoor, and then, a binary classifier determines whether AirTender is spilling oil or not. The detection is made with the help of the Yolo5 architecture, whereas the classification is carried out with the help of a suitably designed Convolutional Neural Network, OilNet40. In order to detect oil leaks more clearly, we dilute the oil in AirTender with a fluorescent dye with an excitation wavelength peak of approximately 390 nm. AirTender is then illuminated with suitable UV LEDs. The whole system is an attempt to design a low-cost detection setup. An on-board device, such as a mini-computer, is placed near the suspension system and connected to a full hd camera framing AirTender. The on-board device, through our Neural Network algorithm, is then able to localize and classify AirTender as normally functioning (non-leak image) or anomaly (leak image).
△ Less
Submitted 23 November, 2022; v1 submitted 10 August, 2022;
originally announced August 2022.
-
CT Image Segmentation for Inflamed and Fibrotic Lungs Using a Multi-Resolution Convolutional Neural Network
Authors:
Sarah E. Gerard,
Jacob Herrmann,
Yi Xin,
Kevin T. Martin,
Emanuele Rezoagli,
Davide Ippolito,
Giacomo Bellani,
Maurizio Cereda,
Junfeng Guo,
Eric A. Hoffman,
David W. Kaczka,
Joseph M. Reinhardt
Abstract:
The purpose of this study was to develop a fully-automated segmentation algorithm, robust to various density enhancing lung abnormalities, to facilitate rapid quantitative analysis of computed tomography images. A polymorphic training approach is proposed, in which both specifically labeled left and right lungs of humans with COPD, and nonspecifically labeled lungs of animals with acute lung injur…
▽ More
The purpose of this study was to develop a fully-automated segmentation algorithm, robust to various density enhancing lung abnormalities, to facilitate rapid quantitative analysis of computed tomography images. A polymorphic training approach is proposed, in which both specifically labeled left and right lungs of humans with COPD, and nonspecifically labeled lungs of animals with acute lung injury, were incorporated into training a single neural network. The resulting network is intended for predicting left and right lung regions in humans with or without diffuse opacification and consolidation. Performance of the proposed lung segmentation algorithm was extensively evaluated on CT scans of subjects with COPD, confirmed COVID-19, lung cancer, and IPF, despite no labeled training data of the latter three diseases. Lobar segmentations were obtained using the left and right lung segmentation as input to the LobeNet algorithm. Regional lobar analysis was performed using hierarchical clustering to identify radiographic subtypes of COVID-19. The proposed lung segmentation algorithm was quantitatively evaluated using semi-automated and manually-corrected segmentations in 87 COVID-19 CT images, achieving an average symmetric surface distance of $0.495 \pm 0.309$ mm and Dice coefficient of $0.985 \pm 0.011$. Hierarchical clustering identified four radiographical phenotypes of COVID-19 based on lobar fractions of consolidated and poorly aerated tissue. Lower left and lower right lobes were consistently more afflicted with poor aeration and consolidation. However, the most severe cases demonstrated involvement of all lobes. The polymorphic training approach was able to accurately segment COVID-19 cases with diffuse consolidation without requiring COVID-19 cases for training.
△ Less
Submitted 14 January, 2021; v1 submitted 16 October, 2020;
originally announced October 2020.
-
Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic
Authors:
C. Galbiati,
A. Abba,
P. Agnes,
P. Amaudruz,
M. Arba,
F. Ardellier-Desages,
C. Badia,
G. Batignani,
G. Bellani,
G. Bianchi,
D. Bishop,
V. Bocci,
W. Bonivento,
B. Bottino,
M. Bouchard,
S. Brice,
G. Buccino,
S. Bussino,
A. Caminata,
A. Capra,
M. Caravati,
M. Carlini,
L. Carrozzi,
J. M. Cela,
B. Celano
, et al. (123 additional authors not shown)
Abstract:
Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equ…
▽ More
Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress.
△ Less
Submitted 10 April, 2020; v1 submitted 23 March, 2020;
originally announced March 2020.
-
One-Dimensional Flow Spectra and Cumulative Energy from Two Pipe Facilities
Authors:
E. -S. Zanoun,
Emir Öngüner,
C. Egbers,
G. Bellani,
A. Talamelli
Abstract:
Experiments have been conducted to assess the sizes and energy fractions of structure in fully developed turbulent pipe flow regime in two pipe facilities, ColaPipe at BTU Cottbus-Senftenberg, and CICLoPE at University of Bologna, for shear Reynolds number in the range $2.5\cdot{10^3}\le{\mathrm{Re_τ}}\le{3.7\cdot{10^4}}$, utilizing a single hot-wire probe. Considerations are given to the spectra…
▽ More
Experiments have been conducted to assess the sizes and energy fractions of structure in fully developed turbulent pipe flow regime in two pipe facilities, ColaPipe at BTU Cottbus-Senftenberg, and CICLoPE at University of Bologna, for shear Reynolds number in the range $2.5\cdot{10^3}\le{\mathrm{Re_τ}}\le{3.7\cdot{10^4}}$, utilizing a single hot-wire probe. Considerations are given to the spectra of the streamwise velocity fluctuations, and to large scale motions and their energy contents from the pipe near-wall to centerline. The analysis of the velocity fluctuations revealed a Reynolds-number dependent inner peak at a fixed wall normal location, however, an outer peak seems not to appear that might be attributed either to low Reynolds number effect or not high enough spatial resolution of hot-wire probe, motivating further study utilizing nanoscale probes. Sizes of the large scale, and very large scale structures were estimated to have wavelengths of 3$R$, and 20$R$ at high Reynolds number, srespectively. The fractional energy contents in wavelengths associated with the large scale motions at various wall normal locations showed maximum contribution to the turbulent kinetic energy near the outer limit of the logarithmic layer.
△ Less
Submitted 1 March, 2019; v1 submitted 21 February, 2019;
originally announced February 2019.
-
Homogeneity and isotropy in a laboratory turbulent flow
Authors:
Gabriele Bellani,
Evan A. Variano
Abstract:
We present a new design for a stirred tank that is forced by two parallel planar arrays of randomly actuated synthetic jets. This arrangement creates turbulence at high Reynolds number with low mean flow. Most importantly, it exhibits a region of 3D homogeneous isotropic turbulence that is significantly larger than the integral lengthscale. These features are essential for enabling laboratory meas…
▽ More
We present a new design for a stirred tank that is forced by two parallel planar arrays of randomly actuated synthetic jets. This arrangement creates turbulence at high Reynolds number with low mean flow. Most importantly, it exhibits a region of 3D homogeneous isotropic turbulence that is significantly larger than the integral lengthscale. These features are essential for enabling laboratory measurements of turbulent suspensions. We use quantitative imaging to confirm isotropy at large, small, and intermediate scales by examining one-- and two--point statistics at the tank center. We then repeat these same measurements to confirm that the values measured at the tank center are constant over a large homogeneous region. In the direction normal to the symmetry plane, our measurements demonstrate that the homogeneous region extends for at least twice the integral length scale $L=9.5$ cm. In the directions parallel to the symmetry plane, the region is at least four times the integral lengthscale, and the extent in this direction is limited only by the size of the tank. Within the homogeneous isotropic region, we measure a turbulent kinetic energy of $6.07 \times 10^{-4} $m$^2$s$^{-2}$, a dissipation rate of $4.65 \times 10^{-5} $m$^2$s$^{-3}$, and a Taylor--scale Reynolds number of $R_λ=334$. The tank's large homogeneous region, combined with its high Reynolds number and its very low mean flow, provides the best approximation of homogeneous isotropic turbulence realized in a laboratory flow to date. These characteristics make the stirred tank an optimal facility for studying the fundamental dynamics of turbulence and turbulent suspensions.
△ Less
Submitted 9 September, 2013;
originally announced September 2013.
-
Slip-velocity of large neutrally-buoyant particles in turbulent flows
Authors:
Gabriele Bellani,
Evan A. Variano
Abstract:
We discuss possible definitions for a stochastic slip velocity that describes the relative motion between large particles and a turbulent flow. This definition is necessary because the slip velocity used in the standard drag model fails when particle size falls within the inertial subrange of ambient turbulence. We propose two definitions, selected in part due to their simplicity: they do not requ…
▽ More
We discuss possible definitions for a stochastic slip velocity that describes the relative motion between large particles and a turbulent flow. This definition is necessary because the slip velocity used in the standard drag model fails when particle size falls within the inertial subrange of ambient turbulence. We propose two definitions, selected in part due to their simplicity: they do not require filtration of the fluid phase velocity field, nor do they require the construction of conditional averages on particle locations. A key benefit of this simplicity is that the stochastic slip velocity proposed here can be calculated equally well for laboratory, field, and numerical experiments. The stochastic slip velocity allows the definition of a Reynolds number that should indicate whether large particles in turbulent flow behave (a) as passive tracers; (b) as a linear filter of the velocity field; or (c) as a nonlinear filter to the velocity field. We calculate the value of stochastic slip for ellipsoidal and spherical particles (the size of the Taylor microscale) measured in laboratory homogeneous isotropic turbulence. The resulting Reynolds number is significantly higher than 1 for both particle shapes, and velocity statistics show that particle motion is a complex non-linear function of the fluid velocity. We further investigate the nonlinear relationship by comparing the probability distribution of fluctuating velocities for particle and fluid phases.
△ Less
Submitted 9 September, 2013; v1 submitted 30 July, 2012;
originally announced July 2012.
-
Universality in dynamic wetting dominated by contact line friction
Authors:
Andreas Carlson,
Gabriele Bellani,
Gustav Amberg
Abstract:
We report experiments on the rapid contact line motion present in the early stages of capillary driven spreading of drops on dry solid substrates. The spreading data fails to follow a conventional viscous or inertial scaling. By integrating experiments and simulations, we quantify a contact line friction ($μ_f$), which is seen to limit the speed of the rapid dynamic wetting. A scaling based on thi…
▽ More
We report experiments on the rapid contact line motion present in the early stages of capillary driven spreading of drops on dry solid substrates. The spreading data fails to follow a conventional viscous or inertial scaling. By integrating experiments and simulations, we quantify a contact line friction ($μ_f$), which is seen to limit the speed of the rapid dynamic wetting. A scaling based on this contact line friction is shown to yield a universal curve for the evolution of the contact line radius as a function of time, for a range of fluid viscosities, drop sizes and surface wettabilities.
△ Less
Submitted 14 March, 2012; v1 submitted 4 November, 2011;
originally announced November 2011.