-
Fabrication and extreme micromechanics of additive metal microarchitectures
Authors:
Sung-Gyu Kang,
Barbara Bellon,
Lalithkumar Bhaskar,
Siyuan Zhang,
Alexander Gotz,
Janis Wirth,
Benjamin Apeleo Zubiri,
Szilvia Kalacska,
Manish Jain,
Amit Sharma,
Wabe Koelmans,
Giorgio Ercolano,
Erdmann Spiecker,
Johann Michler,
Jakob Schwiedrzik,
Gerhard Dehm,
Rajaprakash Ramachandramoorthy
Abstract:
The mechanical performance of metallic metamaterials with 3-dimensional solid frames is typically a combination of the geometrical effect ("architecture") and the characteristic size effects of the base material ("microstructure"). In this study, for the first time, the temperature- and rate-dependent mechanical response of copper microlattices has been investigated. The microlattices were fabrica…
▽ More
The mechanical performance of metallic metamaterials with 3-dimensional solid frames is typically a combination of the geometrical effect ("architecture") and the characteristic size effects of the base material ("microstructure"). In this study, for the first time, the temperature- and rate-dependent mechanical response of copper microlattices has been investigated. The microlattices were fabricated via a localized electrodeposition in liquid (LEL) process which enables high-precision additive manufacturing of metal at the micro-scale. The metal microlattices possess a unique microstructure with micron sized grains that are rich with randomly oriented growth twins and near-ideal nodal connectivity. Importantly, copper microlattices exhibited unique temperature (-150 and 25 degree C) and strain rate (0.001~100 s-1) dependent deformation behavior during in situ micromechanical testing. Systematic compression tests of fully dense copper micropillars, equivalent in diameter and length to the struts of the microlattice at comparable extreme loading conditions, allow us to investigate the intrinsic deformation mechanism of copper. Combined with the post-mortem microstructural analysis, substantial shifts in deformation mechanisms depending on the temperature and strain rate were revealed. On the one hand, at room temperature (25 degree C), dislocation slip based plastic deformation occurs and leads to a localized deformation of the micropillars. On the other hand, at cryogenic temperature (-150 degree C), mechanical twinning occurs and leads to relatively homogeneous deformation of the micropillars. Based on the intrinsic deformation mechanisms of copper, the temperature and strain rate dependent deformation behavior of microlattices could be explained.
△ Less
Submitted 3 April, 2024; v1 submitted 23 November, 2023;
originally announced November 2023.
-
Multiscale prediction of microstructure length scales in metallic alloy casting
Authors:
B. Bellón,
A. K. Boukellal,
T. Isensee,
O. M. Wellborn,
K. P. Trumble,
M. J. M. Krane,
M. S. Titus,
D. Tourret,
J. LLorca
Abstract:
In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, a…
▽ More
In this article, we combine casting experiments and quantitative simulations to present a novel multiscale modeling approach to predict local primary dendritic spacings in metallic alloys solidified in conditions relevant to industrial casting processes. To this end, primary dendritic spacings were measured in instrumented casting experiments in Al-Cu alloys containing 1\,wt\% and 4\,wt\% of Cu, and they were compared to spacing stability ranges and average spacings in dendritic arrays simulated using phase-field (PF) and dendritic needle network (DNN) models. It is first shown that PF and DNN lead to similar results for the Al-1\,wt\%Cu alloy, using a dendrite tip selection constant calculated with PF in the DNN simulations. PF simulations cannot achieve quantitative predictions for the Al-4\,wt\%Cu alloy because they are too computationally demanding due to the large separation of scale between tip radius and diffusion length, a characteristic feature of non-dilute alloys. Nevertheless, the results of DNN simulations for non-dilute Al-Cu alloys are in overall good agreement with our experimental results as well as with those of an extensive literature review. Simulations consistently suggest a widening of the PDAS stability range with a decrease of the temperature gradient as the microstructure goes from cellular-dendrites to well-developed hierarchical dendrites.
△ Less
Submitted 19 January, 2021;
originally announced January 2021.
-
An analysis of the influence of the precipitate type on the mechanical behavior of Al-Cu alloys by means of micropillar compression tests
Authors:
B. Bellón,
S. Haouala,
J. LLorca
Abstract:
The influence of different types of precipitates (either Guinier-Preston zones, $θ''$ or $θ'$) on the critical resolved shear stress and strain hardening was determined by means of micropillar compression tests in an Al - 4 wt. \% Cu alloy. The size, shape and volume fraction of the precipitates were measured in each case. It was found that size effects were negligible for micropillars with diamet…
▽ More
The influence of different types of precipitates (either Guinier-Preston zones, $θ''$ or $θ'$) on the critical resolved shear stress and strain hardening was determined by means of micropillar compression tests in an Al - 4 wt. \% Cu alloy. The size, shape and volume fraction of the precipitates were measured in each case. It was found that size effects were negligible for micropillars with diameter $\ge$ 5 $μ$m. Micropillars with Guinier-Preston zones showed strain localization due to precipitate shearing. The best mechanical properties were obtained with either a fine dispersion of the $θ''$ precipitates or a coarser dispersion of $θ'$. Both precipitate shearing and Orowan loops were observed around the $θ''$ precipitates and the micropillar strength was compatible with the predictions of the Orowan model. In the case of the alloy with $θ'$ precipitates, the strengthening contribution associated with the transformation strain around the precipitates has to be included in the model to explain the experimental results. Finally, the micropillar compression tests in crystals with different orientations were used to calibrate a phenomenological crystal plasticity. This information was used to predict the mechanical properties of polycrystals by means of computational homogeneization.
△ Less
Submitted 15 May, 2020;
originally announced May 2020.
-
Multiscale modelling of precipitation hardening in Al-Cu alloys: dislocation dynamics simulations and experimental validation
Authors:
R. Santos-Güemes,
B. Bellón,
G. Esteban-Manzanares,
J. Segurado,
L. Capolungo,
J. LLorca
Abstract:
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $θ'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out within the framework of the discrete-continuous method and the precipitates were assumed to be impenetrable by dislocations. The main parameters that determine the disl…
▽ More
The mechanisms of dislocation/precipitate interactions were analyzed in an Al-Cu alloy containing a homogeneous dispersion of $θ'$ precipitates by means of discrete dislocation dynamics simulations. The simulations were carried out within the framework of the discrete-continuous method and the precipitates were assumed to be impenetrable by dislocations. The main parameters that determine the dislocation/precipitate interactions (elastic mismatch, stress-free transformation strains, dislocation mobility and cross-slip rate) were obtained from atomistic simulations, while the size, shape, spatial distribution and volume fraction of the precipitates were obtained from transmission electron microscopy. The predictions of the critical resolved shear stress (including the contribution of solid solution) were in agreement with the experimental results obtained by means of compression tests in micropillars of the Al-Cu alloy oriented for single slip. The simulations revealed that the most important contribution to the precipitation hardening of the alloy was provided by the stress-free transformation strains followed by the solution hardening and the Orowan mechanism due to the bow-out of the dislocations around the precipitates.
△ Less
Submitted 8 February, 2020;
originally announced February 2020.
-
Strengthening of Al-Cu alloys by Guinier-Preston zones: predictions from atomistic simulations
Authors:
G. Esteban-Manzanares,
B. Bellón,
E. Martínez,
I. Papadimitriou,
J. LLorca
Abstract:
A scale bridging strategy based in molecular statics and molecular dynamics simulations in combination with transition state theory has been developed to determine the flow stress of Al-Cu alloy containing Guinier-Preston zones. The athermal contribution to the flow stress was determined from the Taylor model, while the thermal contribution was obtained from the obstacle strength and the free ener…
▽ More
A scale bridging strategy based in molecular statics and molecular dynamics simulations in combination with transition state theory has been developed to determine the flow stress of Al-Cu alloy containing Guinier-Preston zones. The athermal contribution to the flow stress was determined from the Taylor model, while the thermal contribution was obtained from the obstacle strength and the free energy barrier. These two magnitudes were obtained by means of molecular statics and molecular dynamics simulations of the interaction of edge dislocations with Guinier-Preston zones in two different orientations. The predictions of the model were compared with experimental data and were in reasonable agreement, showing the potential of atomistic simulations in combination with transition state theory to predict the flow stress of metallic alloys strengthened with precipitates.
△ Less
Submitted 28 July, 2019;
originally announced July 2019.
-
A multidisciplinary approach to study precipitation kinetics and hardening in an Al-4Cu (wt. %) alloy
Authors:
A. Rodríguez-Veiga,
B. Bellón,
I. Papadimitriou,
G. Esteban-Manzanares,
I. Sabirov,
J. Llorca
Abstract:
A multidisciplinary approach is presented to analyse the precipitation process in a model Al-Cu alloy. Although this topic has been extensively studied in the past, most of the investigations are focussed either on transmission electron microscopy or on thermal analysis of the processes. The information obtained from these techniques cannot, however, provide a coherent picture of all the complex t…
▽ More
A multidisciplinary approach is presented to analyse the precipitation process in a model Al-Cu alloy. Although this topic has been extensively studied in the past, most of the investigations are focussed either on transmission electron microscopy or on thermal analysis of the processes. The information obtained from these techniques cannot, however, provide a coherent picture of all the complex transformations that take place during decomposition of supersaturated solid solution. Thermal analysis, high resolution dilatometry, (high resolution) transmission electron microscopy and density functional calculations are combined to study precipitation kinetics, interfacial energies, and the effect of second phase precipitates on the mechanical strength of the alloy. Data on both the coherent and semi-coherent orientations of the θ"/Al interface are reported for the first time. The combination of the different characterization and modelling techniques provides a detailed picture of the precipitation phenomena that take place during aging and of the different contributions to the strength of the alloy. This strategy can be used to analyse and design more complex alloys.
△ Less
Submitted 25 April, 2018;
originally announced April 2018.
-
Multiscale modelling of the morphology and spatial distribution of θ' precipitates in Al-Cu alloys
Authors:
H. Liu,
B. Bellón,
J. LLorca
Abstract:
A multiscale approach based on the phase-field model is developed to simulate homogeneous and heterogeneous formation of θ' precipitates during high temperature ageing in Al-Cu alloys. The model parameters that determine the different energy contributions (chemical free energy, interfacial energy, lattice parameters, elastic constants) were obtained from either computational thermodynamics databas…
▽ More
A multiscale approach based on the phase-field model is developed to simulate homogeneous and heterogeneous formation of θ' precipitates during high temperature ageing in Al-Cu alloys. The model parameters that determine the different energy contributions (chemical free energy, interfacial energy, lattice parameters, elastic constants) were obtained from either computational thermodynamics databases or from first-principles density functional theory and molecular statics simulations. From the information, the evolution and equilibrium morphology of the θ' precipitates is simulated in 3D using the phase-field model. The model was able to reproduce the evolution of the different orientation variants of plate-like shaped θ' precipitates with orientation relationship (001)θ'//(001)α and [100]θ'//[100]α during homogeneous nucleation as well as the heterogeneous nucleation on dislocations, leading to the formation of precipitate arrays. Heterogeneous nucleation on pre-existing dislocation(s) was triggered by the interaction energy between the dislocation stress field and the stress-free transformation strain associated to the nucleation of the θ' precipitates. Moreover, the mechanisms controlling the evolution of the morphology and the equilibrium aspect ratio of the precipitates were ascertained. All the predictions of the multiscale model were in good agreement with experimental data.
△ Less
Submitted 25 April, 2017; v1 submitted 16 February, 2017;
originally announced February 2017.
