-
Photocatalytic water oxidation on SrTiO$_3$ [001] surfaces
Authors:
Vidushi Sharma,
Benjamin Bein,
Amanda Lai,
Betül Pamuk,
Cyrus E. Dreyer,
Marivi Fernández-Serra,
Matthew Dawber
Abstract:
SrTiO$_3$ is a highly efficient photocatalyst for the overall water splitting reaction under UV irradiation. However, an atomic-level understanding of the active surface sites responsible for the oxidation and reduction reactions is still lacking. Here we present a unified experimental and computational account of the photocatalytic activity at the SrO- and TiO$_2$- terminations of aqueous-solvate…
▽ More
SrTiO$_3$ is a highly efficient photocatalyst for the overall water splitting reaction under UV irradiation. However, an atomic-level understanding of the active surface sites responsible for the oxidation and reduction reactions is still lacking. Here we present a unified experimental and computational account of the photocatalytic activity at the SrO- and TiO$_2$- terminations of aqueous-solvated [001] SrTiO$_3$. Our experimental findings show that the overall water-splitting reaction proceeds on the SrTiO$_3$ surface only when the two terminations are simultaneously exposed to water. Our simulations explain this, showing that the photogenerated hole-driven oxidation primarily occurs at SrO surfaces in a sequence of four single hole transfer reactions, while the TiO$_2$ termination effects the crucial band alignment of the photocatalyst relative to the water oxidation potential. The present work elucidates the interdependence of the two chemical terminations of SrTiO$_3$ surfaces, and has consequent implications for maximizing sustainable solar-driven water splitting.
△ Less
Submitted 31 January, 2022;
originally announced January 2022.
-
Role of ferroelectric polarization during growth of highly strained ferroelectrics revealed by in-situ x-ray diffraction
Authors:
Rui Liu,
Jeffrey G. Ulbrandt,
Hsiang-Chun Hsing,
Anna Gura,
Benjamin Bein,
Alec Sun,
Charles Pan,
Giulia Bertino,
Amanda Lai,
Kaize Cheng,
Eli Doyle,
Kenneth Evans-Lutterodt,
Randall L. Headrick,
Matthew Dawber
Abstract:
Strain engineering of perovskite oxide thin films has proven to be an extremely powerful method for enhancing and inducing ferroelectric behavior. In ferroelectric thin films and superlattices, the polarization is intricately linked to crystal structure, but we show here that it can also play an important role in the growth process, influencing growth rates, relaxation mechanisms, electrical prope…
▽ More
Strain engineering of perovskite oxide thin films has proven to be an extremely powerful method for enhancing and inducing ferroelectric behavior. In ferroelectric thin films and superlattices, the polarization is intricately linked to crystal structure, but we show here that it can also play an important role in the growth process, influencing growth rates, relaxation mechanisms, electrical properties and domain structures. We have studied this effect in detail by focusing on the properties of BaTiO$_{3}$ thin films grown on very thin layers of PbTiO$_{3}$ using a combination of x-ray diffraction, piezoforce microscopy, electrical characterization and rapid in-situ x-ray diffraction reciprocal space maps during the growth using synchrotron radiation. Using a simple model we show that the changes in growth are driven by the energy cost for the top material to sustain the polarization imposed upon it by the underlying layer, and these effects may be expected to occur in other multilayer systems where polarization is present during growth. Our research motivates the concept of polarization engineering during the growth process as a new and complementary approach to strain engineering.
△ Less
Submitted 26 September, 2019;
originally announced September 2019.
-
In-situ x-ray diffraction and the evolution of polarization during the growth of ferroelectric superlattices
Authors:
Benjamin Bein,
Hsiang-Chun Hsing,
Sara J. Callori,
John Sinsheimer,
Priya V. Chinta,
Randall L. Headrick,
Matthew Dawber
Abstract:
In epitaxially strained ferroelectric thin films and superlattices, the ferroelectric transition temperature can lie above the growth temperature. Ferroelectric polarization and domains should then evolve during the growth of a sample, and electrostatic boundary conditions may play an important role. In this work, ferroelectric domains, surface termination, average lattice parameter and bilayer th…
▽ More
In epitaxially strained ferroelectric thin films and superlattices, the ferroelectric transition temperature can lie above the growth temperature. Ferroelectric polarization and domains should then evolve during the growth of a sample, and electrostatic boundary conditions may play an important role. In this work, ferroelectric domains, surface termination, average lattice parameter and bilayer thickness are simultaneously monitored using in-situ synchrotron x-ray diffraction during the growth of BaTiO$_3$/SrTiO$_3$ superlattices on SrTiO$_3$ substrates by off-axis RF magnetron sputtering. The technique used allows for scan times substantially faster than the growth of a single layer of material. Effects of electric boundary conditions are investigated by growing the same superlattice alternatively on SrTiO$_3$ substrates and 20nm SrRuO$_3$ thin films on SrTiO$_3$ substrates. These experiments provide important insights into the formation and evolution of ferroelectric domains when the sample is ferroelectric during the growth process.
△ Less
Submitted 4 December, 2015; v1 submitted 26 February, 2015;
originally announced February 2015.
-
Statistical Analysis of Large-scale EUV Waves Observed by STEREO/EUVI
Authors:
Nicole Muhr,
Astrid Maria Veronig,
Ines Waltraud Kienreich,
Bojan Vrsnak,
Manuela Temmer,
Bianca Maria Bein
Abstract:
We present a statistical analysis of 60 strong large-scale EUV wave events that occurred during January 2007 to February 2011 with the STEREO twin spacecraft regarding their kinematical evolution and wave pulse characteristics. For the start velocity, we obtain for the arithmetic mean $312\pm115$ km s$^{-1}$ (within a range of 100$-$630 km s$^{-1}$). For the mean (linear) velocity, the arithmetic…
▽ More
We present a statistical analysis of 60 strong large-scale EUV wave events that occurred during January 2007 to February 2011 with the STEREO twin spacecraft regarding their kinematical evolution and wave pulse characteristics. For the start velocity, we obtain for the arithmetic mean $312\pm115$ km s$^{-1}$ (within a range of 100$-$630 km s$^{-1}$). For the mean (linear) velocity, the arithmetic mean is $254\pm76$ km s$^{-1}$ (within a range of 130$-$470 km s$^{-1}$). 52 % of all waves under study show a distinct deceleration during their propagation ($a\leq-50$ m s$^{-2}$), the other 48 % are consistent with a constant speed within the uncertainties ($-50\leq a\leq50$ m s$^{-2}$). The start velocity and the acceleration show a strong anticorrelation with $c\approx-0.8$, \textit i.e initially faster events undergo stronger deceleration than slower events. The (smooth) transition between constant propagation for slow events and deceleration in faster events occurs at an EUV wave start velocity of $v\approx230$ km s$^{-1}$, which corresponds well to the fast-mode speed in the quiet corona. These findings provide strong evidence that the EUV waves under study are indeed large-amplitude fast-mode MHD waves. This interpretation is further supported by the correlations obtained between the peak velocity and the peak amplitude, impulsiveness, and build-up time of the disturbance. We obtained the following association rates of EUV wave events to other solar phenomena: 95 % are associated with a coronal mass ejection (CME), 74 % to a solar flare, 15 % to interplanetary type II bursts, and 22 % to coronal type II bursts. These findings are consistent with the interpretation that the associated CMEs are the EUV waves' driving agent.
△ Less
Submitted 11 August, 2014;
originally announced August 2014.
-
The height evolution of the `true' CME mass derived from STEREO COR1 and COR2 observations
Authors:
B. M. Bein,
M. Temmer,
A. Vourlidas,
A. M. Veronig,
D. Utz
Abstract:
Using combined STEREO-A and STEREO-B EUVI, COR1 and COR2 data, we derive deprojected CME kinematics and CME `true' mass evolutions for a sample of 25 events that occurred during December 2007 to April 2011. We develop a fitting function to describe the CME mass evolution with height. The function considers both the effect of the coronagraph occulter, at the beginning of the CME evolution, and an a…
▽ More
Using combined STEREO-A and STEREO-B EUVI, COR1 and COR2 data, we derive deprojected CME kinematics and CME `true' mass evolutions for a sample of 25 events that occurred during December 2007 to April 2011. We develop a fitting function to describe the CME mass evolution with height. The function considers both the effect of the coronagraph occulter, at the beginning of the CME evolution, and an actual mass increase. The latter becomes important at about 10Rs to 15Rs and is assumed to mostly contribute up to 20Rs. The mass increase ranges from 2% to 6% per Rs and, is positively correlated to the total CME mass. Due to the combination of COR1 and COR2 mass measurements, we are able to estimate the `true' mass value for very low coronal heights (< 3Rs). Based on the deprojected CME kinematics and initial ejected masses, we derive the kinetic energies and propelling forces acting on the CME in the low corona (< 3Rs). The derived CME kinetic energies range between 1-66*10^23 J, and the forces range between 2.2-510*10^14 N.
△ Less
Submitted 14 March, 2013;
originally announced March 2013.
-
Engineering polarization rotation in a ferroelectric superlattice
Authors:
J. Sinsheimer,
S. J. Callori,
B. Bein,
Y. Benkara,
J. Daley,
J. Coraor,
D. Su,
P. W. Stephens,
M. Dawber
Abstract:
A key property that drives research in ferroelectric perovskite oxides is their strong piezoelectric response in which an electric field is induced by an applied strain, and vice-versa for the converse piezoelectric effect. We have achieved an experimental enhancement of the piezoelectric response and dielectric tunability in artificially layered epitaxial PbTiO$_{3}$/CaTiO$_{3}$ superlattices thr…
▽ More
A key property that drives research in ferroelectric perovskite oxides is their strong piezoelectric response in which an electric field is induced by an applied strain, and vice-versa for the converse piezoelectric effect. We have achieved an experimental enhancement of the piezoelectric response and dielectric tunability in artificially layered epitaxial PbTiO$_{3}$/CaTiO$_{3}$ superlattices through an engineered rotation of the polarization direction. As the relative layer thicknesses within the superlattice were changed from sample to sample we found evidence for polarization rotation in multiple x-ray diffraction measurements. Associated changes in functional properties were seen in electrical measurements and piezoforce microscopy. The results demonstrate a new approach to inducing polarization rotation under ambient conditions in an artificially layered thin film.
△ Less
Submitted 14 September, 2012;
originally announced September 2012.
-
Impulsive acceleration of coronal mass ejections: II. Relation to SXR flares and filament eruptions
Authors:
B. M. Bein,
S. Berkebile-Stoiser,
A. M. Veronig,
M. Temmer,
B. Vrsnak
Abstract:
Using high time cadence images from the STEREO EUVI, COR1 and COR2 instruments, we derived detailed kinematics of the main acceleration stage for a sample of 95 CMEs in comparison with associated flares and filament eruptions. We found that CMEs associated with flares reveal on average significantly higher peak accelerations and lower acceleration phase durations, initiation heights and heights, a…
▽ More
Using high time cadence images from the STEREO EUVI, COR1 and COR2 instruments, we derived detailed kinematics of the main acceleration stage for a sample of 95 CMEs in comparison with associated flares and filament eruptions. We found that CMEs associated with flares reveal on average significantly higher peak accelerations and lower acceleration phase durations, initiation heights and heights, at which they reach their peak velocities and peak accelerations. This means that CMEs that are associated with flares are characterized by higher and more impulsive accelerations and originate from lower in the corona where the magnetic field is stronger. For CMEs that are associated with filament eruptions we found only for the CME peak acceleration significantly lower values than for events which were not associated with filament eruptions. The flare rise time was found to be positively correlated with the CME acceleration duration, and negatively correlated with the CME peak acceleration. For the majority of the events the CME acceleration starts before the flare onset (for 75% of the events) and the CME accleration ends after the SXR peak time (for 77% of the events). In ~60% of the events, the time difference between the peak time of the flare SXR flux derivative and the peak time of the CME acceleration is smaller than \pm5 min, which hints at a feedback relationship between the CME acceleration and the energy release in the associated flare due to magnetic reconnection.
△ Less
Submitted 11 June, 2012;
originally announced June 2012.
-
CME acceleration and non-thermal flare characteristics
Authors:
S. Berkebile-Stoiser,
A. M. Veronig,
B. M. Bein,
M. Temmer
Abstract:
We investigate the relationship between the main acceleration phase of coronal mass ejections (CMEs) and the particle acceleration in the associated flares as evidenced in RHESSI non-thermal X-rays for a set of 37 impulsive flare-CME events. CME peak velocity and peak acceleration yield distinct correlations with various parameters characterizing the flare-accelerated electron spectra. The highest…
▽ More
We investigate the relationship between the main acceleration phase of coronal mass ejections (CMEs) and the particle acceleration in the associated flares as evidenced in RHESSI non-thermal X-rays for a set of 37 impulsive flare-CME events. CME peak velocity and peak acceleration yield distinct correlations with various parameters characterizing the flare-accelerated electron spectra. The highest correlation coefficient is obtained for the relation of the CME peak velocity and the total energy in accelerated electrons (c = 0.85), supporting the idea that the acceleration of the CME and the particle acceleration in the associated flare draw their energy from a common source, probably magnetic reconnection in the current sheet behind the erupting structure. In general, the CME peak velocity shows somewhat higher correlations with the non-thermal flare parameters than the CME peak acceleration, except for the spectral index of the accelerated electron spectrum which yields a higher correlation with the CME peak acceleration (c = -0.6), indicating that the hardness of the flare-accelerated electron spectrum is tightly coupled to the impulsive acceleration process of the rising CME structure. We also obtained high correlations between the CME initiation height $h_0$ and the non-thermal flare parameters, with the highest correlation of $h_0$ to the spectral index of flare-accelerated electrons (c = 0.8). This means that CMEs erupting at low coronal heights, i.e.\ in regions of stronger magnetic fields, are accompanied with flares which are more efficient to accelerate electrons to high energies. In the majority of events (80%), the non-thermal flare emission starts after the CME acceleration (6 min), giving a current sheet length at the onset of magnetic reconnection of 21 \pm 7 Mm. The flare HXR peaks are well synchronized with the peak of the CME acceleration profile.
△ Less
Submitted 11 May, 2012;
originally announced May 2012.
-
Characteristics of kinematics of a coronal mass ejection during the 2010 August 1 CME-CME interaction event
Authors:
Manuela Temmer,
Bojan Vrsnak,
Tanja Rollett,
Bianca Bein,
Curt A. de Koning,
Ying Liu,
Eckhard Bosman,
Jackie A. Davies,
Christian Möstl,
Tomislav Zic,
Astrid M. Veronig,
Volker Bothmer,
Richard Harrison,
Nariaki Nitta,
Mario Bisi,
Olga Flor,
Jonathan Eastwood,
Dusan Odstrcil,
Robert Forsyth
Abstract:
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in…
▽ More
We study the interaction of two successive coronal mass ejections (CMEs) during the 2010 August 1 events using STEREO/SECCHI COR and HI data. We obtain the direction of motion for both CMEs by applying several independent reconstruction methods and find that the CMEs head in similar directions. This provides evidence that a full interaction takes place between the two CMEs that can be observed in the HI1 field-of-view. The full de-projected kinematics of the faster CME from Sun to Earth is derived by combining remote observations with in situ measurements of the CME at 1 AU. The speed profile of the faster CME (CME2; ~1200 km/s) shows a strong deceleration over the distance range at which it reaches the slower, preceding CME (CME1; ~700 km/s). By applying a drag-based model we are able to reproduce the kinematical profile of CME2 suggesting that CME1 represents a magnetohydrodynamic obstacle for CME2 and that, after the interaction, the merged entity propagates as a single structure in an ambient flow of speed and density typical for quiet solar wind conditions. Observational facts show that magnetic forces may contribute to the enhanced deceleration of CME2. We speculate that the increase in magnetic tension and pressure, when CME2 bends and compresses the magnetic field lines of CME1, increases the efficiency of drag.
△ Less
Submitted 3 February, 2012;
originally announced February 2012.
-
Impulsive acceleration of coronal mass ejections: I. Statistics and CME source region characteristics
Authors:
B. M. Bein,
S. Berkebile-Stoiser,
A. M. Veronig,
M. Temmer,
N. Muhr,
I. Kienreich,
D. Utz,
B. Vršnak
Abstract:
We use high time cadence images acquired by the STEREO EUVI and COR instruments to study the evolution of coronal mass ejections (CMEs), from their initiation, through the impulsive acceleration to the propagation phase. For a set of 95 CMEs we derived detailed height, velocity and acceleration profiles and statistically analysed characteristic CME parameters: peak acceleration, peak velocity, acc…
▽ More
We use high time cadence images acquired by the STEREO EUVI and COR instruments to study the evolution of coronal mass ejections (CMEs), from their initiation, through the impulsive acceleration to the propagation phase. For a set of 95 CMEs we derived detailed height, velocity and acceleration profiles and statistically analysed characteristic CME parameters: peak acceleration, peak velocity, acceleration duration, initiation height, height at peak velocity, height at peak acceleration and size of the CME source region. The CME peak accelerations derived range from 20 to 6800 m s^2 and are inversely correlated to the acceleration duration and to the height at peak acceleration. 74% of the events reach their peak acceleration at heights below 0.5 Rsun. CMEs which originate from compact sources low in the corona are more impulsive and reach higher peak accelerations at smaller heights. These findings can be explained by the Lorentz force, which drives the CME accelerations and decreases with height and CME size.
△ Less
Submitted 2 August, 2011;
originally announced August 2011.