-
Phase Coherent Link of an Atomic Clock to a Self-Referenced Microresonator Frequency Comb
Authors:
Pascal Del'Haye,
Aurelien Coillet,
Tara Fortier,
Katja Beha,
Daniel C. Cole,
Ki Youl Yang,
Hansuek Lee,
Kerry J. Vahala,
Scott B. Papp,
Scott A. Diddams
Abstract:
The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In contrast, a frequency comb based on the Kerr-nonlinearity in a dielectric microresonator will enable frequency comb functionality in a micro-fabricated and chip-integ…
▽ More
The counting and control of optical cycles of light has become common with modelocked laser frequency combs. But even with advances in laser technology, modelocked laser combs remain bulk-component devices that are hand-assembled. In contrast, a frequency comb based on the Kerr-nonlinearity in a dielectric microresonator will enable frequency comb functionality in a micro-fabricated and chip-integrated package suitable for use in a wide-range of environments. Such an advance will significantly impact fields ranging from spectroscopy and trace gas sensing, to astronomy, communications, atomic time kee** and photonic data processing. Yet in spite of the remarkable progress shown over the past years, microresonator frequency combs ("microcombs") have still been without the key function of direct f-2f self-referencing and phase-coherent frequency control that will be critical for enabling their full potential. Here we realize these missing elements using a low-noise 16.4 GHz silicon chip microcomb that is coherently broadened from its initial 1550 nm wavelength and subsequently f-2f self-referenced and phase-stabilized to an atomic clock. With this advance, we not only realize the highest repetition rate octave-span frequency comb ever achieved, but we highlight the low-noise microcomb properties that support highest atomic clock limited frequency stability.
△ Less
Submitted 25 November, 2015;
originally announced November 2015.
-
Self-referencing a continuous-wave laser with electro-optic modulation
Authors:
Katja Beha,
Daniel C. Cole,
Pascal Del'Haye,
Aurélien Coillet,
Scott A. Diddams,
Scott B. Papp
Abstract:
We phase-coherently measure the frequency of continuous-wave (CW) laser light by use of optical-phase modulation and f-2f nonlinear interferometry. Periodic electro-optic modulation (EOM) transforms the CW laser into a continuous train of picosecond optical pulses. Subsequent nonlinear-fiber broadening of this EOM frequency comb produces a supercontinuum with 160 THz of bandwidth. A critical inter…
▽ More
We phase-coherently measure the frequency of continuous-wave (CW) laser light by use of optical-phase modulation and f-2f nonlinear interferometry. Periodic electro-optic modulation (EOM) transforms the CW laser into a continuous train of picosecond optical pulses. Subsequent nonlinear-fiber broadening of this EOM frequency comb produces a supercontinuum with 160 THz of bandwidth. A critical intermediate step is optical filtering of the EOM comb to reduce electronic-noise-induced decoherence of the supercontinuum. Applying f-2f self-referencing with the supercontinuum yields the carrier-envelope offset frequency of the EOM comb, which is precisely the difference of the CW laser frequency and an exact integer multiple of the EOM pulse repetition rate. Here we demonstrate absolute optical frequency metrology and synthesis applications of the self-referenced CW laser with <5E-14 fractional accuracy and stability.
△ Less
Submitted 22 July, 2015;
originally announced July 2015.
-
Broadband dispersion engineered microresonator on-a-chip
Authors:
Ki Youl Yang,
Katja Beha,
Daniel C. Cole,
Xu Yi,
Pascal Del'Haye,
Hansuek Lee,
Jiang Li,
Dong Yoon Oh,
Scott A. Diddams,
Scott B. Papp,
Kerry J. Vahala
Abstract:
Control of dispersion in fibre optical waveguides is of critical importance to optical fibre communications systems and more recently for continuum generation from the ultraviolet to the mid-infrared. The wavelength at which the group velocity dispersion crosses zero can be set by varying fibre core diameter or index step. Moreover, sophisticated methods to manipulate higher-order dispersion so as…
▽ More
Control of dispersion in fibre optical waveguides is of critical importance to optical fibre communications systems and more recently for continuum generation from the ultraviolet to the mid-infrared. The wavelength at which the group velocity dispersion crosses zero can be set by varying fibre core diameter or index step. Moreover, sophisticated methods to manipulate higher-order dispersion so as shape and even flatten dispersion over wide bandwidths are possible using multi-cladding fibre. Here we introduce design and fabrication techniques that allow analogous dispersion control in chip-integrated optical microresonators, and thereby demonstrate higher-order, wide-bandwidth dispersion control over an octave of spectrum. Importantly, the fabrication method we employ for dispersion control simultaneously permits optical Q factors above 100 million, which is critical for efficient operation of nonlinear optical oscillators. Dispersion control in high Q systems has taken on greater importance in recent years with increased interest in chip-integrable optical frequency combs.
△ Less
Submitted 23 June, 2015;
originally announced June 2015.
-
Phase Steps and Hot Resonator Detuning in Microresonator Frequency Combs
Authors:
Pascal Del'Haye,
Aurelien Coillet,
William Loh,
Katja Beha,
Scott B. Papp,
Scott A. Diddams
Abstract:
Experiments and theoretical modeling yielded significant progress towards understanding of Kerr-effect induced optical frequency comb generation in microresonators. However, the simultaneous interaction of hundreds or thousands of optical comb frequencies with the same number of resonator modes leads to complicated nonlinear dynamics that are far from fully understood. An important prerequisite fo…
▽ More
Experiments and theoretical modeling yielded significant progress towards understanding of Kerr-effect induced optical frequency comb generation in microresonators. However, the simultaneous interaction of hundreds or thousands of optical comb frequencies with the same number of resonator modes leads to complicated nonlinear dynamics that are far from fully understood. An important prerequisite for modeling the comb formation process is the knowledge of phase and amplitude of the comb modes as well as the detuning from their respective microresonator modes. Here, we present comprehensive measurements that fully characterize optical microcomb states. We introduce a way of measuring resonator dispersion and detuning of comb modes in a hot resonator while generating an optical frequency comb. The presented phase measurements show unpredicted comb states with discrete π and π/2 steps in the comb phases that are not observed in conventional optical frequency combs.
△ Less
Submitted 27 May, 2014;
originally announced May 2014.
-
A microresonator frequency comb optical clock
Authors:
Scott B. Papp,
Katja Beha,
Pascal DelHaye,
Franklyn Quinlan,
Hansuek Lee,
Kerry J. Vahala,
Scott A. Diddams
Abstract:
Optical-frequency combs enable measurement precision at the 20th digit, and accuracy entirely commensurate with their reference oscillator. A new direction in experiments is the creation of ultracompact frequency combs by way of nonlinear parametric optics in microresonators. We refer to these as microcombs, and here we report a silicon-chip-based microcomb optical clock that phase-coherently conv…
▽ More
Optical-frequency combs enable measurement precision at the 20th digit, and accuracy entirely commensurate with their reference oscillator. A new direction in experiments is the creation of ultracompact frequency combs by way of nonlinear parametric optics in microresonators. We refer to these as microcombs, and here we report a silicon-chip-based microcomb optical clock that phase-coherently converts an optical-frequency reference to a microwave signal. A low-noise comb spectrum with 25 THz span is generated with a 2 mm diameter silica disk and broadening in nonlinear fiber. This spectrum is stabilized to rubidium frequency references separated by 3.5 THz by controlling two teeth 108 modes apart. The optical clocks output is the electronically countable 33 GHz microcomb line spacing, which features an absolute stability better than the rubidium transitions by the expected factor of 108. Our work demonstrates the comprehensive set of tools needed for interfacing microcombs to state-of-the-art optical clocks.
△ Less
Submitted 13 September, 2013;
originally announced September 2013.
-
Assignment of the NV0 575 nm zero-phonon line in diamond to a 2E-2A2 transition
Authors:
N. B. Manson,
K. Beha,
A. Batalov,
L. J. Rogers,
M. W. Doherty,
R. Bratschitsch,
A. Leitenstorfer
Abstract:
The time-averaged emission spectrum of single nitrogen-vacancy defects in diamond gives zero-phonon lines of both the negative charge state at 637 nm (1.945 eV) and the neutral charge state at 575 nm (2.156 eV). This occurs through photo-conversion between the two charge states. Due to strain in the diamond the zero-phonon lines are split and it is found that the splitting and polarization of the…
▽ More
The time-averaged emission spectrum of single nitrogen-vacancy defects in diamond gives zero-phonon lines of both the negative charge state at 637 nm (1.945 eV) and the neutral charge state at 575 nm (2.156 eV). This occurs through photo-conversion between the two charge states. Due to strain in the diamond the zero-phonon lines are split and it is found that the splitting and polarization of the two zero-phonon lines are the same. From this observation and consideration of the electronic structure of the nitrogen-vacancy center it is concluded that the excited state of the neutral center has A2 orbital symmetry. The assignment of the 575 nm transition to a 2E - 2A2 transition has not been established previously.
△ Less
Submitted 15 January, 2013;
originally announced January 2013.