Showing 1–23 of 23 results for author: Beezley, J D

Data Assimilation of Satellite Fire Detection in Coupled Atmosphere-Fire Simulation by WRF-SFIRE

Authors: Jan Mandel, Adam K. Kochanski, Martin Vejmelka, Jonathan D. Beezley

Abstract: Currently available satellite active fire detection products from the VIIRS and MODIS instruments on polar-orbiting satellites produce detection squares in arbitrary locations. There is no global fire/no fire map, no detection under cloud cover, false negatives are common, and the detection squares are much coarser than the resolution of a fire behavior model. Consequently, current active fire sat… ▽ More Currently available satellite active fire detection products from the VIIRS and MODIS instruments on polar-orbiting satellites produce detection squares in arbitrary locations. There is no global fire/no fire map, no detection under cloud cover, false negatives are common, and the detection squares are much coarser than the resolution of a fire behavior model. Consequently, current active fire satellite detection products should be used to improve fire modeling in a statistical sense only, rather than as a direct input. We describe a new data assimilation method for active fire detection, based on a modification of the fire arrival time to simultaneously minimize the difference from the forecast fire arrival time and maximize the likelihood of the fire detection data. This method is inspired by contour detection methods used in computer vision, and it can be cast as a Bayesian inverse problem technique, or a generalized Tikhonov regularization. After the new fire arrival time on the whole simulation domain is found, the model can be re-run from a time in the past using the new fire arrival time to generate the heat fluxes and to spin up the atmospheric model until the satellite overpass time, when the coupled simulation continues from the modified state. △ Less

Submitted 25 October, 2014; originally announced October 2014.

Comments: 9 pages, VII International Conference on Forest Fire Research, Coimbra, Portugal, November 17-20, 2014

Report number: UCD CCM Report 324 MSC Class: 86A10; 86A22; 62F15; 93E24; 93E10; 93E11

Journal ref: Advances in Forest Fire Research, D. X. Viegas (ed), 2014, 716-724

Toward an integrated system for fire, smoke, and air quality simulations

Authors: Adam K. Kochanski, Mary Ann Jenkins, Kara Yedinak, Jan Mandel, Jonathan D. Beezley, Brian Lamb

Abstract: In this study, we describe how WRF-Sfire is coupled with WRF-Chem to construct WRFSC, an integrated forecast system for wildfire and smoke prediction. The integrated forecast system has the advantage of not requiring a simple plume-rise model and assumptions about the size and heat release from the fire in order to determine fire emissions into the atmosphere. With WRF-Sfire, wildfire spread, plum… ▽ More In this study, we describe how WRF-Sfire is coupled with WRF-Chem to construct WRFSC, an integrated forecast system for wildfire and smoke prediction. The integrated forecast system has the advantage of not requiring a simple plume-rise model and assumptions about the size and heat release from the fire in order to determine fire emissions into the atmosphere. With WRF-Sfire, wildfire spread, plume and plume-top heights are predicted directly, at every WRF timestep, providing comprehensive meteorology and fire emissions to the chemical transport model WRF-Chem. Evaluation of WRFSC was based on comparisons between available observations to the results of two WRFSC simulations. The study found overall good agreement between forecasted and observed fire spread and smoke transport for the Witch-Guejito fire. Also the simulated PM2.5 (fine particulate matter) peak concentrations matched the observations. However, the NO and ozone levels were underestimated in the simulations and the peak concentrations were mistimed. Determining the terminal or plume-top height is one of the most important aspects of simulating wildfire plume transport, and the study found overall good agreement between simulated and observed plume-top heights, with some (10% or less) underestimation by the simulations. One of the most promising results of the study was the agreement between passive-tracer modeled plume-top heights for the Barker Canyon fire simulation and observations. This simulation took only 13h, with the first 24h forecast ready in almost 3h, making it a possible operational tool for providing emission profiles for external chemical transport models. △ Less

Submitted 15 May, 2014; originally announced May 2014.

Comments: 28 pages, 12 figures

Report number: UCD CCM Report 322 MSC Class: 86A10

Journal ref: International Journal of Wildland Fire, 25, 534-546, 2016

Air pollution forecasting by coupled atmosphere-fire model WRF and SFIRE with WRF-Chem

Authors: Adam K. Kochanski, Jonathan D. Beezley, Jan Mandel, Craig B. Clements

Abstract: Atmospheric pollution regulations have emerged as a dominant obstacle to prescribed burns. Thus, forecasting the pollution caused by wildland fires has acquired high importance. WRF and SFIRE model wildland fire spread in a two-way interaction with the atmosphere. The surface heat flux from the fire causes strong updrafts, which in turn change the winds and affect the fire spread. Fire emissions,… ▽ More Atmospheric pollution regulations have emerged as a dominant obstacle to prescribed burns. Thus, forecasting the pollution caused by wildland fires has acquired high importance. WRF and SFIRE model wildland fire spread in a two-way interaction with the atmosphere. The surface heat flux from the fire causes strong updrafts, which in turn change the winds and affect the fire spread. Fire emissions, estimated from the burning organic matter, are inserted in every time step into WRF-Chem tracers at the lowest atmospheric layer. The buoyancy caused by the fire then naturally simulates plume dynamics, and the chemical transport in WRF-Chem provides a forecast of the pollution spread. We discuss the choice of wood burning models and compatible chemical transport models in WRF-Chem, and demonstrate the results on case studies. △ Less

Submitted 29 April, 2013; originally announced April 2013.

Comments: Proceedings of 4th Fire Behavior and Fuels Conference, February 18-22, 2013, Raleigh, North Carolina, USA

Journal ref: Proceedings of 4th Fire Behavior and Fuels Conference 2013, Wade, D. D. and Fox, R. L., eds., pp. 143-155, International Association of Wildland Fire, 2014

WRF fire simulation coupled with a fuel moisture model and smoke transport by WRF-Chem

Authors: Adam K. Kochanski, Jonathan D. Beezley, Jan Mandel, Minjeong Kim

Abstract: We describe two recent additions to WRF coupled with a fire spread model. Fire propagation is strongly dependent on fuel moisture, which in turn depends on the history of the atmosphere. We have implemented a equilibrium time-lag model of fuel moisture driven by WRF variables. The code allows the user to specify fuel parameters, with the defaults calibrated to the Canadian fire danger rating syste… ▽ More We describe two recent additions to WRF coupled with a fire spread model. Fire propagation is strongly dependent on fuel moisture, which in turn depends on the history of the atmosphere. We have implemented a equilibrium time-lag model of fuel moisture driven by WRF variables. The code allows the user to specify fuel parameters, with the defaults calibrated to the Canadian fire danger rating system for 10-hour fuel. The moisture model can run coupled with the atmosphere-fire model, or offline from WRF output to equilibrate the moisture over a period of time and to provide initial moisture conditions for a coupled atmosphere-fire-moisture simulation. The fire model also inserts smoke tracers into WRF-Chem to model the transport of fire emissions. The coupled model is available from OpenWFM.org. An earlier version of the fire model coupled with atmosphere is a part of WRF release. △ Less

Submitted 27 August, 2012; v1 submitted 5 August, 2012; originally announced August 2012.

Comments: 2012 WRF Users Workshop, Boulder, CO, 25-29 June 2012, paper P51, 5 pages. Corrected a typo

Report number: UCD CCM Report 311

Evaluation of WRF-Sfire Performance with Field Observations from the FireFlux experiment

Authors: Adam K. Kochanski, Mary Ann Jenkins, Jan Mandel, Jonathan D. Beezley, Craig B. Clements, Steven Krueger

Abstract: This study uses in-situ measurements collected during the FireFlux field experiment to evaluate and improve the performance of coupled atmosphere-fire model WRF-Sfire. The simulation by WRF-Sfire of the experimental burn shows that WRF-Sfire is capable of providing realistic head fire rate-of-spread and the vertical temperature structure of the fire plume, and, up to 10 m above ground level, fire-… ▽ More This study uses in-situ measurements collected during the FireFlux field experiment to evaluate and improve the performance of coupled atmosphere-fire model WRF-Sfire. The simulation by WRF-Sfire of the experimental burn shows that WRF-Sfire is capable of providing realistic head fire rate-of-spread and the vertical temperature structure of the fire plume, and, up to 10 m above ground level, fire-induced surface flow and vertical velocities within the plume. The model captured the changes in wind speed and direction before, during, and after fire front passage, along with arrival times of wind speed, temperature, and updraft maximae, at the two instrumented flux towers used in FireFlux. The model overestimated vertical velocities and underestimated horizontal wind speeds measured at tower heights above the 10 m, and it is hypothesized that the limited model resolution over estimated the fire front depth, leading to too high a heat release and, subsequently, too strong an updraft. However, on the whole, WRF-Sfire fire plume behavior is consistent with the interpretation of FireFlux observations. The study suggests optimal experimental pre-planning, design, and execution of future field campaigns that are needed for further coupled atmosphere-fire model development and evaluation. △ Less

Submitted 19 June, 2012; v1 submitted 14 June, 2012; originally announced June 2012.

Assimilation of Perimeter Data and Coupling with Fuel Moisture in a Wildland Fire - Atmosphere DDDAS

Authors: Jan Mandel, Jonathan D. Beezley, Adam K. Kochanski, Volodymyr Y. Kondratenko, Minjeong Kim

Abstract: We present a methodology to change the state of the Weather Research Forecasting (WRF) model coupled with the fire spread code SFIRE, based on Rothermel's formula and the level set method, and with a fuel moisture model. The fire perimeter in the model changes in response to data while the model is running. However, the atmosphere state takes time to develop in response to the forcing by the heat… ▽ More We present a methodology to change the state of the Weather Research Forecasting (WRF) model coupled with the fire spread code SFIRE, based on Rothermel's formula and the level set method, and with a fuel moisture model. The fire perimeter in the model changes in response to data while the model is running. However, the atmosphere state takes time to develop in response to the forcing by the heat flux from the fire. Therefore, an artificial fire history is created from an earlier fire perimeter to the new perimeter, and replayed with the proper heat fluxes to allow the atmosphere state to adjust. The method is an extension of an earlier method to start the coupled fire model from a developed fire perimeter rather than an ignition point. The level set method is also used to identify parameters of the simulation, such as the spread rate and the fuel moisture. The coupled model is available from openwfm.org, and it extends the WRF-Fire code in WRF release. △ Less

Submitted 27 March, 2012; v1 submitted 10 March, 2012; originally announced March 2012.

Comments: ICCS 2012, 10 pages; corrected some DOI typesetting in the references

Report number: UCD CCM Report 309 MSC Class: 80A25; 86A10; 86A22

Journal ref: Procedia Computer Science 9, 2012, 1100-1109

Real time simulation of 2007 Santa Ana fires

Authors: Adam K. Kochanski, Mary Ann Jenkins, Steven K. Krueger, Jan Mandel, Jonathan D. Beezley

Abstract: There are many wildfire behaviors of increasing relevance that are outside the forecast capabilities of even the most sophisticated operational fire spread and fire behavior model. The limitations of the operational models are due primarily to their inability to represent coupled fire-atmosphere interactions. Coupled wildfire-atmosphere models are physics-based fluid-dynamical prognostic models of… ▽ More There are many wildfire behaviors of increasing relevance that are outside the forecast capabilities of even the most sophisticated operational fire spread and fire behavior model. The limitations of the operational models are due primarily to their inability to represent coupled fire-atmosphere interactions. Coupled wildfire-atmosphere models are physics-based fluid-dynamical prognostic models of wildfire spread and behavior that attempt an almost complete representation of fire-atmosphere interactions. This level of fidelity however means that these models cannot be used operationally. The reason is that, despite ever increasing computational resources, the complexity and range of processes and scales (1 mm to 100 km) involved in this modeling approach make computational costs prohibitively expensive. In this study we propose an intermediate approach. A physics-based coupled atmosphere-fire model is used to resolve the large-scale and local weather as well as the atmosphere-fire interactions, while combustion is represented simply using an existing operational surface fire behavior model. This model combination strikes a balance between fidelity and speed of execution. The feasibility of this approach is examined based on an analysis of a numerical simulation of two very large Santa Ana fires using WRF-Sfire, a coupled atmosphere-fire model available at the Open Wildland Fire Modeling Community (OpenWFM.org); an earlier version is available as WRF-Fire in WRF release. The study demonstrates that a wind and fire spread forecast of reasonable accuracy was obtained at an execution speed that would have made real-time wildfire forecasting of this event possible. △ Less

Submitted 15 February, 2012; v1 submitted 15 February, 2012; originally announced February 2012.

Comments: Exploring the Mega-fire Reality 2011, November 14-17, 2011, Florida State University Conference Center, Tallahassee, Florida. Added full author names

Report number: UCD CCM Report 308

Journal ref: Forest Ecology and Management 15 (2013) 136-149

Coupled Atmosphere-Fire Simulations of Fireflux: Impacts of Model Resolution on Model Performance

Authors: Adam K. Kochanski, S. K. Krueger, M. A. Jenkins, J. Mandel, J. D. Beezley

Abstract: The ability to forecast grass fire spread could be of a great importance for agencies making decisions about prescribed burns. However, the usefulness of the models used for fire-spread predictions is limited by the time required for completing the coupled atmosphere-fire simulations. In this study we analyze the sensitivity of a coupled model with respect to the vertical resolution of the atmosph… ▽ More The ability to forecast grass fire spread could be of a great importance for agencies making decisions about prescribed burns. However, the usefulness of the models used for fire-spread predictions is limited by the time required for completing the coupled atmosphere-fire simulations. In this study we analyze the sensitivity of a coupled model with respect to the vertical resolution of the atmospheric grid and the resolution of fire mesh that both affect computational performance of the model. Based on the observations of the plume properties recorded during the FireFlux experiment (Clements et al., 2007), we try to establish the optimal model configuration that provides realistic results for the least computational expense. △ Less

Submitted 2 December, 2011; originally announced December 2011.

Comments: AMS, Ninth Symposium on Fire and Forest Meteorology, Palm Springs 2011

Report number: UCD CCM Report 306

A wildland fire modeling and visualization environment

Authors: Jan Mandel, Jonathan D. Beezley, Adam K. Kochanski, Volodymyr Y. Kondratenko, Lin Zhang, Erik Anderson, Joel Daniels II, Claudio T. Silva, Christopher R. Johnson

Abstract: We present an overview of a modeling environment, consisting of a coupled atmosphere-wildfire model, utilities for visualization, data processing, and diagnostics, open source software repositories, and a community wiki. The fire model, called SFIRE, is based on a fire-spread model, implemented by the level-set method, and it is coupled with the Weather Research Forecasting (WRF) model. A version… ▽ More We present an overview of a modeling environment, consisting of a coupled atmosphere-wildfire model, utilities for visualization, data processing, and diagnostics, open source software repositories, and a community wiki. The fire model, called SFIRE, is based on a fire-spread model, implemented by the level-set method, and it is coupled with the Weather Research Forecasting (WRF) model. A version with a subset of the features is distributed with WRF 3.3 as WRF-Fire. In each time step, the fire module takes the wind as input and returns the latent and sensible heat fluxes. The software architecture uses WRF parallel infrastructure for massively parallel computing. Recent features of the code include interpolation from an ideal logarithmic wind profile for nonhomogeneous fuels and ignition from a fire perimeter with an atmosphere and fire spin-up. Real runs use online sources for fuel maps, fine-scale topography, and meteorological data, and can run faster than real time. Visualization pathways allow generating images and animations in many packages, including VisTrails, VAPOR, MayaVi, and Paraview, as well as output to Google Earth. The environment is available from openwfm.org. New diagnostic variables were added to the code recently, including a new kind of fireline intensity, which takes into account also the speed of burning, unlike Byram's fireline intensity. △ Less

Submitted 20 November, 2011; originally announced November 2011.

Comments: 12 pages; Ninth Symposium on Fire and Forest Meteorology, Palm Springs, CA, October 2011

Report number: UCD CCM Report 305 MSC Class: 86-08

Ignition from a Fire Perimeter in a WRF Wildland Fire Model

Authors: Volodymyr Y. Kondratenko, Jonathan D. Beezley, Adam K. Kochanski, Jan Mandel

Abstract: The current WRF-Fire model starts the fire from a given ignition point at a given time. We want to start the model from a given fire perimeter at a given time instead. However, the fuel balance and the state of the atmosphere depend on the history of the fire. The purpose of this work is to create an approximate artificial history of the fire based on the given fire perimeter and time and an appro… ▽ More The current WRF-Fire model starts the fire from a given ignition point at a given time. We want to start the model from a given fire perimeter at a given time instead. However, the fuel balance and the state of the atmosphere depend on the history of the fire. The purpose of this work is to create an approximate artificial history of the fire based on the given fire perimeter and time and an approximate ignition point and time. Replaying the fire history then establishes a reasonable fuel balance and outputs heat fluxes into the atmospheric model, which allow the atmospheric circulation to develop. Then the coupled atmosphere-fire model takes over. In this preliminary investigation, the ignition times in the fire area are calculated based on the distance from the ignition point to the perimeter, assuming that the perimeter is convex or star-shaped. Simulation results for an ideal example show that the fire can continue in a natural way from the perimeter. Possible extensions include algorithms for more general perimeters and running the fire model backwards in time from the perimeter to create a more realistic history. The model used extends WRF-Fire and it is available from openwfm.org. △ Less

Submitted 13 July, 2011; originally announced July 2011.

Comments: 12th Annual WRF Users' Workshop, Boulder, CO, June 2011

Report number: UCD CCM Report 302

Simulation of the 2009 Harmanli fire (Bulgaria)

Authors: Georgi Jordanov, Jonathan D. Beezley, Nina Dobrinkova, Adam K. Kochanski, Jan Mandel, Bedřich Sousedík

Abstract: We use a coupled atmosphere-fire model to simulate a fire that occurred on August 14--17, 2009, in the Harmanli region, Bulgaria. Data was obtained from GIS and satellites imagery, and from standard atmospheric data sources. Fuel data was classified in the 13 Anderson categories. For correct fire behavior, the spatial resolution of the models needed to be fine enough to resolve the essential micro… ▽ More We use a coupled atmosphere-fire model to simulate a fire that occurred on August 14--17, 2009, in the Harmanli region, Bulgaria. Data was obtained from GIS and satellites imagery, and from standard atmospheric data sources. Fuel data was classified in the 13 Anderson categories. For correct fire behavior, the spatial resolution of the models needed to be fine enough to resolve the essential micrometeorological effects. The simulation results are compared to available incident data. The code runs faster than real time on a cluster. The model is available from openwfm.org and it extends WRF-Fire from WRF 3.3 release. △ Less

Submitted 23 June, 2011; originally announced June 2011.

Comments: 8 pages, 2 tables, 5 figures. 8th International Conference on Large-Scale Scientific Computations, June 6-10, 2011, Sozopol, Bulgaria

Report number: UCD CCM Report 301 MSC Class: 97M50

Journal ref: Lecture Notes in Computer Science, Volume 7116, Springer, 291-298, 2012

Wavelet Ensemble Kalman Filters

Authors: Jonathan D. Beezley, Jan Mandel, Loren Cobb

Abstract: We present a new type of the EnKF for data assimilation in spatial models that uses diagonal approximation of the state covariance in the wavelet space to achieve adaptive localization. The efficiency of the new method is demonstrated on an example. We present a new type of the EnKF for data assimilation in spatial models that uses diagonal approximation of the state covariance in the wavelet space to achieve adaptive localization. The efficiency of the new method is demonstrated on an example. △ Less

Submitted 27 February, 2011; originally announced February 2011.

Comments: 4 pages, 4 figures

Report number: UCD CCM Report 296 MSC Class: 93E11

Coupled atmosphere-wildland fire modeling with WRF-Fire

Authors: Jan Mandel, Jonathan D. Beezley, Adam K. Kochanski

Abstract: We describe the physical model, numerical algorithms, and software structure of WRF-Fire. WRF-Fire consists of a fire-spread model, implemented by the level-set method, coupled with the Weather Research and Forecasting model. In every time step, the fire model inputs the surface wind, which drives the fire, and outputs the heat flux from the fire into the atmosphere, which in turn influences the a… ▽ More We describe the physical model, numerical algorithms, and software structure of WRF-Fire. WRF-Fire consists of a fire-spread model, implemented by the level-set method, coupled with the Weather Research and Forecasting model. In every time step, the fire model inputs the surface wind, which drives the fire, and outputs the heat flux from the fire into the atmosphere, which in turn influences the atmosphere. The level-set method allows submesh representation of the burning region and flexible implementation of various ignition modes. WRF-Fire is distributed as a part of WRF and it uses the WRF parallel infrastructure for parallel computing. △ Less

Submitted 10 March, 2011; v1 submitted 7 February, 2011; originally announced February 2011.

Comments: Version 3.3, 41 pages, 2 tables, 12 figures. As published in Discussions, under review for Geoscientific Model Development

Report number: UCD CCM Report 295

Journal ref: Geoscientific Model Development 4, 591-610, 2011

An overview of the coupled atmosphere-wildland fire model WRF-Fire

Authors: Jan Mandel, Jonathan D. Beezley, Adam K. Kochanski

Abstract: We describe the coupled atmosphere-wildfire model WRF-Fire, which is distributed as a part of WRF. The fire module is based on a fire-spread model, implemented by the level-set method. In each time step, the fire module takes the wind as input and returns the latent and sensible heat fluxes. We report on the software architecture and features of the software. We describe the coupled atmosphere-wildfire model WRF-Fire, which is distributed as a part of WRF. The fire module is based on a fire-spread model, implemented by the level-set method. In each time step, the fire module takes the wind as input and returns the latent and sensible heat fluxes. We report on the software architecture and features of the software. △ Less

Submitted 30 January, 2011; originally announced January 2011.

Comments: 91st American Meteorological Society Annual Meeting, Seattle, WA, January 2011

Report number: UCD CCM Report 294

Data Driven Computing by the Morphing Fast Fourier Transform Ensemble Kalman Filter in Epidemic Spread Simulations

Authors: Jan Mandel, Jonathan D. Beezley, Loren Cobb, Ashok Krishnamurthy

Abstract: The FFT EnKF data assimilation method is proposed and applied to a stochastic cell simulation of an epidemic, based on the S-I-R spread model. The FFT EnKF combines spatial statistics and ensemble filtering methodologies into a localized and computationally inexpensive version of EnKF with a very small ensemble, and it is further combined with the morphing EnKF to assimilate changes in the positio… ▽ More The FFT EnKF data assimilation method is proposed and applied to a stochastic cell simulation of an epidemic, based on the S-I-R spread model. The FFT EnKF combines spatial statistics and ensemble filtering methodologies into a localized and computationally inexpensive version of EnKF with a very small ensemble, and it is further combined with the morphing EnKF to assimilate changes in the position of the epidemic. △ Less

Submitted 8 March, 2010; originally announced March 2010.

Comments: 11 pages, 3 figures. Submitted to ICCS 2010.

Report number: UCD CCM Report 286 MSC Class: 60G35

Fast Fourier Transform Ensemble Kalman Filter with Application to a Coupled Atmosphere-Wildland Fire Model

Authors: Jan Mandel, Jonathan D. Beezley, Volodymyr Y. Kondratenko

Abstract: We propose a new type of the Ensemble Kalman Filter (EnKF), which uses the Fast Fourier Transform (FFT) for covariance estimation from a very small ensemble with automatic tapering, and for a fast computation of the analysis ensemble by convolution, avoiding the need to solve a sparse system with the tapered matrix. The FFT EnKF is combined with the morphing EnKF to enable the correction of posi… ▽ More We propose a new type of the Ensemble Kalman Filter (EnKF), which uses the Fast Fourier Transform (FFT) for covariance estimation from a very small ensemble with automatic tapering, and for a fast computation of the analysis ensemble by convolution, avoiding the need to solve a sparse system with the tapered matrix. The FFT EnKF is combined with the morphing EnKF to enable the correction of position errors, in addition to amplitude errors, and demonstrated on WRF-Fire, the Weather Research Forecasting (WRF) model coupled with a fire spread model implemented by the level set method. △ Less

Submitted 11 January, 2010; originally announced January 2010.

Comments: 8 pages

Report number: UCD CCM Report 285

Journal ref: Proceedings of the MS'10 International Conference, Barcelona, Spain, 15-17 July 2010, World Scientific, pp. 777-784

On the Convergence of the Ensemble Kalman Filter

Authors: Jan Mandel, Loren Cobb, Jonathan D. Beezley

Abstract: Convergence of the ensemble Kalman filter in the limit for large ensembles to the Kalman filter is proved. In each step of the filter, convergence of the ensemble sample covariance follows from a weak law of large numbers for exchangeable random variables, the continuous map** theorem gives convergence in probability of the ensemble members, and $L^p$ bounds on the ensemble then give $L^p$ conve… ▽ More Convergence of the ensemble Kalman filter in the limit for large ensembles to the Kalman filter is proved. In each step of the filter, convergence of the ensemble sample covariance follows from a weak law of large numbers for exchangeable random variables, the continuous map** theorem gives convergence in probability of the ensemble members, and $L^p$ bounds on the ensemble then give $L^p$ convergence. △ Less

Submitted 3 May, 2011; v1 submitted 19 January, 2009; originally announced January 2009.

Comments: Revised, 8 pages

Report number: UCD CCM Report 278 MSC Class: 62F12; 62C12

Journal ref: Applications of Mathematics 56, 533-541, 2011

An Ensemble Kalman-Particle Predictor-Corrector Filter for Non-Gaussian Data Assimilation

Authors: Jan Mandel, Jonathan D. Beezley

Abstract: An Ensemble Kalman Filter (EnKF, the predictor) is used make a large change in the state, followed by a Particle Filer (PF, the corrector) which assigns importance weights to describe non-Gaussian distribution. The weights are obtained by nonparametric density estimation. It is demonstrated on several numerical examples that the new predictor-corrector filter combines the advantages of the EnKF… ▽ More An Ensemble Kalman Filter (EnKF, the predictor) is used make a large change in the state, followed by a Particle Filer (PF, the corrector) which assigns importance weights to describe non-Gaussian distribution. The weights are obtained by nonparametric density estimation. It is demonstrated on several numerical examples that the new predictor-corrector filter combines the advantages of the EnKF and the PF and that it is suitable for high dimensional states which are discretizations of solutions of partial differential equations. △ Less

Submitted 13 February, 2009; v1 submitted 11 December, 2008; originally announced December 2008.

Comments: ICCS 2009, to appear; 9 pages; minor edits

Report number: UCD CCM Report 276

Journal ref: Lecture Notes in Computer Science 5545, 470-478, 2009

Real-Time Data Driven Wildland Fire Modeling

Authors: Jonathan D. Beezley, Soham Chakraborty, Janice L. Coen, Craig C. Douglas, Jan Mandel, Anthony Vodacek, Zhen Wang

Abstract: We are develo** a wildland fire model based on semi-empirical relations that estimate the rate of spread of a surface fire and post-frontal heat release, coupled with WRF, the Weather Research and Forecasting atmospheric model. A level set method identifies the fire front. Data are assimilated using both amplitude and position corrections using a morphing ensemble Kalman filter. We will use th… ▽ More We are develo** a wildland fire model based on semi-empirical relations that estimate the rate of spread of a surface fire and post-frontal heat release, coupled with WRF, the Weather Research and Forecasting atmospheric model. A level set method identifies the fire front. Data are assimilated using both amplitude and position corrections using a morphing ensemble Kalman filter. We will use thermal images of a fire for observations that will be compared to synthetic image based on the model state. △ Less

Submitted 12 February, 2008; originally announced February 2008.

Comments: 8 pages, 4 figures. ICCS 08

Journal ref: Proceedings ICCS 2008. Lecture Notes in Computer Science vol 5103 pp 46-53 2008.

Towards a Real-Time Data Driven Wildland Fire Model

Authors: Jan Mandel, Jonathan D. Beezley, Soham Chakraborty, Janice L. Coen, Craig C. Douglas, Anthony Vodacek, Zhen Wang

Abstract: A wildland fire model based on semi-empirical relations for the spread rate of a surface fire and post-frontal heat release is coupled with the Weather Research and Forecasting atmospheric model (WRF). The propagation of the fire front is implemented by a level set method. Data is assimilated by a morphing ensemble Kalman filter, which provides amplitude as well as position corrections. Thermal… ▽ More A wildland fire model based on semi-empirical relations for the spread rate of a surface fire and post-frontal heat release is coupled with the Weather Research and Forecasting atmospheric model (WRF). The propagation of the fire front is implemented by a level set method. Data is assimilated by a morphing ensemble Kalman filter, which provides amplitude as well as position corrections. Thermal images of a fire will provide the observations and will be compared to a synthetic image from the model state. △ Less

Submitted 26 January, 2008; v1 submitted 24 January, 2008; originally announced January 2008.

Comments: 5 pages, 4 figures

Report number: UCD CCM Report 265

Journal ref: IEEE International Symposium on Parallel and Distributed Processing, 2008 (IPDPS 2008), pp. 1-5

Data Assimilation for Wildland Fires: Ensemble Kalman filters in coupled atmosphere-surface models

Authors: Jan Mandel, Jonathan D. Beezley, Janice L. Coen, Minjeong Kim

Abstract: Two wildland fire models are described, one based on reaction-diffusion-convection partial differential equations, and one based on semi-empirical fire spread by the level let method. The level set method model is coupled with the Weather Research and Forecasting (WRF) atmospheric model. The regularized and the morphing ensemble Kalman filter are used for data assimilation. Two wildland fire models are described, one based on reaction-diffusion-convection partial differential equations, and one based on semi-empirical fire spread by the level let method. The level set method model is coupled with the Weather Research and Forecasting (WRF) atmospheric model. The regularized and the morphing ensemble Kalman filter are used for data assimilation. △ Less

Submitted 15 January, 2009; v1 submitted 24 December, 2007; originally announced December 2007.

Comments: Minor revision, except description of the model expanded. 29 pages, 9 figures, 53 references

Report number: UCD CCM Report 261

Journal ref: IEEE Control Systems Magazine, 29, Issue 3, June 2009, 47-65

A wildland fire model with data assimilation

Authors: Jan Mandel, Lynn S. Bennethum, Jonathan D. Beezley, Janice L. Coen, Craig C. Douglas, Minjeong Kim, Anthony Vodacek

Abstract: A wildfire model is formulated based on balance equations for energy and fuel, where the fuel loss due to combustion corresponds to the fuel reaction rate. The resulting coupled partial differential equations have coefficients that can be approximated from prior measurements of wildfires. An ensemble Kalman filter technique with regularization is then used to assimilate temperatures measured at… ▽ More A wildfire model is formulated based on balance equations for energy and fuel, where the fuel loss due to combustion corresponds to the fuel reaction rate. The resulting coupled partial differential equations have coefficients that can be approximated from prior measurements of wildfires. An ensemble Kalman filter technique with regularization is then used to assimilate temperatures measured at selected points into running wildfire simulations. The assimilation technique is able to modify the simulations to track the measurements correctly even if the simulations were started with an erroneous ignition location that is quite far away from the correct one. △ Less

Submitted 15 January, 2008; v1 submitted 1 September, 2007; originally announced September 2007.

Comments: 35 pages, 12 figures; minor revision January 2008. Original version available from http://www-math.cudenver.edu/ccm/reports

Report number: University of Colorado Denver CCM Report 233 MSC Class: 65N06; 35K57; 37M05; 93B30; 60G35

Morphing Ensemble Kalman Filters

Authors: Jonathan D. Beezley, Jan Mandel

Abstract: A new type of ensemble filter is proposed, which combines an ensemble Kalman filter (EnKF) with the ideas of morphing and registration from image processing. This results in filters suitable for nonlinear problems whose solutions exhibit moving coherent features, such as thin interfaces in wildfire modeling. The ensemble members are represented as the composition of one common state with a spati… ▽ More A new type of ensemble filter is proposed, which combines an ensemble Kalman filter (EnKF) with the ideas of morphing and registration from image processing. This results in filters suitable for nonlinear problems whose solutions exhibit moving coherent features, such as thin interfaces in wildfire modeling. The ensemble members are represented as the composition of one common state with a spatial transformation, called registration map**, plus a residual. A fully automatic registration method is used that requires only gridded data, so the features in the model state do not need to be identified by the user. The morphing EnKF operates on a transformed state consisting of the registration map** and the residual. Essentially, the morphing EnKF uses intermediate states obtained by morphing instead of linear combinations of the states. △ Less

Submitted 23 August, 2007; v1 submitted 25 May, 2007; originally announced May 2007.

Comments: 17 pages, 7 figures. Added DDDAS references to the introduction

Report number: UCDHSC CCM Report 240 MSC Class: 65P99; 62F15; 94A08