-
The final design of the iLocater spectrograph: An optimized architecture for diffraction-limited EPRV instruments
Authors:
Jonathan Crass,
David Aikens,
Joaquin Mason,
David King,
Justin R. Crepp,
Andrew Bechter,
Eric Bechter,
Mahsa Farsad,
Christian Schwab,
Michael VanSickle
Abstract:
iLocater is a near-infrared, extremely precise radial velocity (EPRV) spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument will undertake precision radial velocity studies of Earth-like planets orbiting low-mass stars. Operating in the diffraction-limited regime, iLocater uses adaptive optics to efficiently inject starlight directly into singl…
▽ More
iLocater is a near-infrared, extremely precise radial velocity (EPRV) spectrograph under construction for the dual 8.4 m diameter Large Binocular Telescope (LBT). The instrument will undertake precision radial velocity studies of Earth-like planets orbiting low-mass stars. Operating in the diffraction-limited regime, iLocater uses adaptive optics to efficiently inject starlight directly into single-mode fibers that illuminate a high spectral resolution (R=190,500 median), cryogenic, diffraction-limited spectrograph. To maximize performance, the spectrograph uses a new design strategy for EPRV instruments, combining intrinsically stable materials for its optomechanical fabrication with precision optical fabrication. This novel combination will enable unique EPRV capabilities for exoplanet and astrophysics studies of the solar neighborhood.
We present the final optical and mechanical designs of the spectrograph system. Ensuring the as-built spectrograph achieves its designed spectral resolution and diffraction-limited performance has required careful control of the end-to-end system wavefront error (WFE) budget. We discuss the efforts undertaken to achieve this goal including minimizing residual WFE in the optical design, assessing diffraction grating WFE performance, optimizing material choices, and requiring precision optical design and fabrication. Our goal is to deliver diffraction-limited performance across the full spectral format, which, combined with intrinsic thermal stability requirements for EPRV science, has driven the selection of silicon optics and Invar optomechanics. The system performance is further optimized using precision (sub-mK) thermal control. This set of design features will allow iLocater to achieve sub-m/s radial velocity precision in the near-infrared, and to serve as the first optimized diffraction-limited spectrograph for EPRV science.
△ Less
Submitted 31 August, 2022;
originally announced September 2022.
-
Studying the Impact of Optical Aberrations on Diffraction-Limited Radial Velocity Instruments
Authors:
Eric B. Bechter,
Andrew J. Bechter,
Justin R. Crepp,
Jonathan Crass
Abstract:
Spectrographs nominally contain a degree of quasi-static optical aberrations resulting from the quality of manufactured component surfaces, imperfect alignment, design residuals, thermal effects, and other other associated phenomena involved in the design and construction process. Aberrations that change over time can mimic the line centroid motion of a Doppler shift, introducing radial velocity (…
▽ More
Spectrographs nominally contain a degree of quasi-static optical aberrations resulting from the quality of manufactured component surfaces, imperfect alignment, design residuals, thermal effects, and other other associated phenomena involved in the design and construction process. Aberrations that change over time can mimic the line centroid motion of a Doppler shift, introducing radial velocity (RV) uncertainty that increases time-series variability. Even when instrument drifts are tracked using a precise wavelength calibration source, barycentric motion of the Earth leads to a wavelength shift of stellar light causing a translation of the spectrum across the focal plane array by many pixels. The wavelength shift allows absorption lines to experience different optical propagation paths and aberrations over observing epochs. We use physical optics propagation simulations to study the impact of aberrations on precise Doppler measurements made by diffraction-limited, high-resolution spectrographs. We quantify the uncertainties that cross-correlation techniques introduce in the presence of aberrations and barycentric RV shifts. We find that aberrations which shift the PSF photo-center in the dispersion direction, in particular primary horizontal coma and trefoil, are the most concerning. To maintain aberration-induced RV errors less than 10 cm/s, phase errors for these particular aberrations must be held well below 0.05 waves at the instrument operating wavelength. Our simulations further show that wavelength calibration only partially compensates for instrumental drifts, owing to a behavioral difference between how cross-correlation techniques handle aberrations between starlight versus calibration light. Identifying subtle physical effects that influence RV errors will help ensure that diffraction-limited planet-finding spectrographs are able to reach their full scientific potential.
△ Less
Submitted 26 July, 2021;
originally announced July 2021.
-
On-sky results for the novel integrated micro-lens ring tip-tilt sensor
Authors:
Philipp Hottinger,
Robert J. Harris,
Jonathan Crass,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Brian Sands,
Tim J. Morris,
Alastair G. Basden,
Nazim Ali Bharmal,
Jochen Heidt,
Theodoros Anagnos,
Philip L. Neureuther,
Martin Glück,
Jennifer Power,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with…
▽ More
We present the first on-sky results of the micro-lens ring tip-tilt (MLR-TT) sensor. This sensor utilizes a 3D printed micro-lens ring feeding six multi-mode fibers to sense misaligned light, allowing centroid reconstruction. A tip-tilt mirror allows the beam to be corrected, increasing the amount of light coupled into a centrally positioned single-mode (science) fiber. The sensor was tested with the iLocater acquisition camera at the Large Binocular Telescope in November 2019. The limit on the maximum achieved root mean square reconstruction accuracy was found to be 0.19 $λ$/D in both tip and tilt, of which approximately 50% of the power originates at frequencies below 10 Hz. We show the reconstruction accuracy is highly dependent on the estimated Strehl ratio and simulations support the assumption that residual adaptive optics aberrations are the main limit to the reconstruction accuracy. We conclude that this sensor is ideally suited to remove post-adaptive optics non-common path tip tilt residuals. We discuss the next steps for the concept development, including optimizations of the lens and fiber, tuning of the correction algorithm and selection of optimal science cases.
△ Less
Submitted 18 June, 2021;
originally announced June 2021.
-
Final Design and On-Sky Testing of the iLocater SX Acquisition Camera: Broadband Single-Mode Fiber Coupling
Authors:
Jonathan Crass,
Andrew Bechter,
Brian Sands,
David L. King,
Ryan Ketterer,
Matthew Engstrom,
Randall Hamper,
Derek Kopon,
James Smous,
Justin R. Crepp,
Manny Montoya,
Oli Durney,
David Cavalieri,
Robert Reynolds,
Michael Vansickle,
Eleanya Onuma,
Joseph Thomes,
Scott Mullin,
Chris Shelton,
Kent Wallace,
Eric Bechter,
Amali Vaz,
Jennifer Power,
Gustavo Rahmer,
Steve Ertel
Abstract:
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, an…
▽ More
Enabling efficient injection of light into single-mode fibers (SMFs) is a key requirement in realizing diffraction-limited astronomical spectroscopy on ground-based telescopes. SMF-fed spectrographs, facilitated by the use of adaptive optics (AO), offer distinct advantages over comparable seeing-limited designs, including higher spectral resolution within a compact and stable instrument volume, and a telescope independent spectrograph design. iLocater is an extremely precise radial velocity (EPRV) spectrograph being built for the Large Binocular Telescope (LBT). We have designed and built the front-end fiber injection system, or acquisition camera, for the SX (left) primary mirror of the LBT. The instrument was installed in 2019 and underwent on-sky commissioning and performance assessment. In this paper, we present the instrument requirements, acquisition camera design, as well as results from first-light measurements. Broadband single-mode fiber coupling in excess of 35% (absolute) in the near-infrared (0.97-1.31μm) was achieved across a range of target magnitudes, spectral types, and observing conditions. Successful demonstration of on-sky performance represents both a major milestone in the development of iLocater and in making efficient ground-based SMF-fed astronomical instruments a reality.
△ Less
Submitted 26 October, 2020;
originally announced October 2020.
-
EarthFinder Probe Mission Concept Study: Characterizing nearby stellar exoplanet systems with Earth-mass analogs for future direct imaging
Authors:
Peter Plavchan,
Gautam Vasisht,
Chas Beichman,
Heather Cegla,
Xavier Dumusque,
Sharon Wang,
Peter Gao,
Courtney Dressing,
Fabienne Bastien,
Sarbani Basu,
Thomas Beatty,
Andrew Bechter,
Eric Bechter,
Cullen Blake,
Vincent Bourrier,
Bryson Cale,
David Ciardi,
Jonathan Crass,
Justin Crepp,
Katherine de Kleer,
Scott Diddams,
Jason Eastman,
Debra Fischer,
Jonathan Gagné,
Scott Gaudi
, et al. (30 additional authors not shown)
Abstract:
EarthFinder is a NASA Astrophysics Probe mission concept selected for study as input to the 2020 Astrophysics National Academies Decadal Survey. The EarthFinder concept is based on a dramatic shift in our understanding of how PRV measurements should be made. We propose a new paradigm which brings the high precision, high cadence domain of transit photometry as demonstrated by Kepler and TESS to th…
▽ More
EarthFinder is a NASA Astrophysics Probe mission concept selected for study as input to the 2020 Astrophysics National Academies Decadal Survey. The EarthFinder concept is based on a dramatic shift in our understanding of how PRV measurements should be made. We propose a new paradigm which brings the high precision, high cadence domain of transit photometry as demonstrated by Kepler and TESS to the challenges of PRV measurements at the cm/s level. This new paradigm takes advantage of: 1) broad wavelength coverage from the UV to NIR which is only possible from space to minimize the effects of stellar activity; 2) extremely compact, highly stable, highly efficient spectrometers (R>150,000) which require the diffraction-limited imaging possible only from space over a broad wavelength range; 3) the revolution in laser-based wavelength standards to ensure cm/s precision over many years; 4) a high cadence observing program which minimizes sampling-induced period aliases; 5) exploiting the absolute flux stability from space for continuum normalization for unprecedented line-by-line analysis not possible from the ground; and 6) focusing on the bright stars which will be the targets of future imaging missions so that EarthFinder can use a ~1.5 m telescope.
△ Less
Submitted 23 June, 2020;
originally announced June 2020.
-
Characterization of Single-Mode Fiber Coupling at the Large Binocular Telescope
Authors:
Andrew J. Bechter,
Jonathan Crass,
Jonathan Tesch,
Justin R. Crepp,
Eric B. Bechter
Abstract:
Optimizing on-sky single-mode fiber (SMF) injection is an essential part of develo** precise Doppler spectrometers and new astrophotonics technologies. We installed and tested a prototype SMF injection system at the Large Binocular Telescope (LBT) in April 2016. The fiber injection unit was built as part of the de-risking process for a new instrument named iLocater that will use adaptive optics…
▽ More
Optimizing on-sky single-mode fiber (SMF) injection is an essential part of develo** precise Doppler spectrometers and new astrophotonics technologies. We installed and tested a prototype SMF injection system at the Large Binocular Telescope (LBT) in April 2016. The fiber injection unit was built as part of the de-risking process for a new instrument named iLocater that will use adaptive optics (AO) to feed a high resolution, near-infrared spectrograph. In this paper we report Y-band SMF coupling measurements for bright, M-type stars. We compare theoretical expectations for delivered Strehl ratio and SMF coupling to experimental results, and evaluate fundamental effects that limit injection efficiency. We find the pupil geometry of the telescope itself limits fiber coupling to a maximum efficiency of rho_tel=0.78. Further analysis shows the individual impact of AO correction, tip-tilt residuals, and static (non-common-path) aberrations contribute coupling coefficients of rho_Strehl=0.33, rho_tip/tilt=0.84, and rho_ncpa=0.8 respectively. Combined, these effects resulted in an average Y-band SMF efficiency of 0.18 for all observations. Finally, we investigate the impact of fiber coupling on radial velocity (RV) precision as a function of stellar apparent magnitude.
△ Less
Submitted 21 May, 2020;
originally announced May 2020.
-
Focal Plane Tip-Tilt Sensing for Improved Single-Mode Fiber Coupling using a 3D-printed Microlens-Ring
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Andrew Bechter,
Jonathan Crass,
Martin Glück,
Jörg-Uwe Pott,
Nazim A. Bharmal,
Alastair Basden,
Tim J. Morris,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam d…
▽ More
Modern extreme adaptive optics (AO) systems achieving diffraction-limited performance open up new possibilities for instrumentation. Especially important for the fields of spectroscopy and interferometry is that it enables the prospect to couple light into single-mode fibers (SMFs). However, due to their small size, efficient coupling is very sensitive to the quality of the fiber alignment, beam drifts and higher-frequency tip-tilt aberrations caused by telescope mechanics and vibrations. These residual aberrations are not always sensed and corrected by the AO system, leading to unacceptable losses. This is particularly severe for the Extremely Large Telescopes, where their huge structure will mean vibrations increase and optimal AO solutions are even more difficult to implement. We have created a focal plane sensor to correct for residual aberrations by surrounding the SMF with six Multi-mode fibers (MMFs). On each of the MMFs sits a printed freeform lens, making up a six-element micro-lens ring to refract the light into these surrounding MMFs and thus minimizing light loss in the gap between the fiber cores. This means when the beam is near diffraction limited and centered almost all light couples to the SMF. When the beam is misaligned, it couples to the surrounding cores, which are read out by a detector and processed by the DARC software driving a tip-tilt mirror. Currently we are aiming to detect and correct only tip-tilt aberrations. However, choosing to surround the central fiber with six sensing locations potentially allows us to investigate higher order correction modes. Here we present the design and performance our prototype system. This has been designed for use with the iLocater fiber injection system at the LBT and can easily be scaled to larger telescopes. We present test results from the KOOL laboratory and initial integration with the iLocater instrument.
△ Less
Submitted 19 December, 2019;
originally announced December 2019.
-
Assessing the Suitability of H4RG Near Infrared Detectors for Precise Doppler Radial Velocity Measurements
Authors:
Eric B. Bechter,
Andrew J. Bechter,
Justin R. Crepp,
Jonathan Crass
Abstract:
At wavelengths longwards of the sensitivity of silicon, hybrid structured mercury-cadmium-telluride (HgCdTe) detectors show promise to enable extremely precise radial velocity (RV) measurements of late-type stars. The most advanced near infrared (NIR) detector commercially available is the HAWAII series (HxRG) of NIR detectors. While the quantum efficiency of such devices has been shown to be appr…
▽ More
At wavelengths longwards of the sensitivity of silicon, hybrid structured mercury-cadmium-telluride (HgCdTe) detectors show promise to enable extremely precise radial velocity (RV) measurements of late-type stars. The most advanced near infrared (NIR) detector commercially available is the HAWAII series (HxRG) of NIR detectors. While the quantum efficiency of such devices has been shown to be approx ninety percent, the noise characteristics of these devices, and how they relate to RV measurements, have yet to be quantified. We characterize the various noise sources generated by H4RG arrays using numerical simulations. We present recent results using our end-to-end spectrograph simulator in combination with the HxRG Noise Generator, which emulates the effects of read noise, parameterized by white noise, correlated and uncorrelated pink noise, alternating column noise, and picture frame noise. The effects of nonlinear pixel response, dark current, persistence, and interpixel capacitance (IPC) on RV precision are also considered. Our results have implications for RV error budgets and instrument noise floors that can be achieved with NIR Doppler spectrographs that utilize this kind of detector.
△ Less
Submitted 29 August, 2019;
originally announced August 2019.
-
The need for single-mode fiber-fed spectrographs
Authors:
Jonathan Crass,
Andrew Bechter,
Eric Bechter,
Charles Beichman,
Cullen Blake,
David Coutts,
Tobias Feger,
Sam Halverson,
Robert J. Harris,
Nemanja Jovanovic,
Peter Plavchan,
Christian Schwab,
Gautam Vasisht,
James K. Wallace,
Ji Wang
Abstract:
Precise Doppler radial-velocity (RV) instruments will continue to play an essential role in advancing our holistic understanding of exoplanetary systems. The combination of orbital parameters from transit surveys and follow-up RV measurements is vital to unlock mass and density estimates of detected planets, giving us insight into their environment and structure. However, the exoplanet field is re…
▽ More
Precise Doppler radial-velocity (RV) instruments will continue to play an essential role in advancing our holistic understanding of exoplanetary systems. The combination of orbital parameters from transit surveys and follow-up RV measurements is vital to unlock mass and density estimates of detected planets, giving us insight into their environment and structure. However, the exoplanet field is reaching a critical juncture: the measurement sensitivity of existing radial-velocity instruments is becoming the limiting factor in further increasing our knowledge. Without improvement in delivered RV measurement precision, we will not be able to provide dynamical mass and density estimates for some of the most exciting (and consequently most challenging) discoveries expected from new transit missions including the Transiting Exoplanet Survey Satellite (TESS) (Plavchan et al. 2015, Ricker et al. 2014). RV precisions at the 10cm/s level are required to fully confirm earth-like analogues, provide masses and measure density to the 1-5% level from these missions. Additionally, this RV capability will also be important to allow for efficient target selection for facilities such as the James Webb Space Telescope (JWST). A promising way forward to achieve this goal is to use single-mode fibers to inject light to a spectrograph. This mitigates many of the error terms facing current generation seeing-limited RV instruments while simultaneously offering the capability of high resolution spectroscopy within a small optical footprint (Schwab et al. 2012, Crepp 2014, Jovanovic et al. 2016a). We discuss the benefits of this technique, its challenges, and the current status of development.
△ Less
Submitted 24 January, 2019; v1 submitted 22 January, 2019;
originally announced January 2019.
-
A Radial Velocity Error Budget for Single-mode Fiber Doppler Spectrographs
Authors:
Andrew J. Bechter,
Eric B. Bechter Justin R. Crepp,
David King,
Jonathan Crass
Abstract:
Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater'…
▽ More
Single-mode fiber (SMF) spectrographs fed with adaptive optics (AO) offer a unique path for achieving extremely precise radial velocity (EPRV) measurements. We present a radial velocity (RV) error budget based on end-to-end numerical simulations of an instrument named iLocater that is being developed for the Large Binocular Telescope(LBT). Representing the first AO-fed, SMF spectrograph, iLocater's design is used to quantify and assess the relative advantages and drawbacks of precise Doppler time series measurements made at the diffraction limit. This framework can be applied for trade-study work to investigate the impact of instrument design decisions on systematic uncertainties encountered in the regime of sub-meter-per-second precision. We find that working at the diffraction-limit through the use of AO and SMF's allows for high spectral resolution and improved instrument stability at the expense of limiting magnitude and longer integration times. Large telescopes equipped with AO alleviates the primary challenges of SMF spectrographs.
△ Less
Submitted 6 December, 2018;
originally announced December 2018.
-
Instrument Simulator and Data Reduction Pipeline for the iLocater Spectrograph
Authors:
Eric B. Bechter,
Andrew J. Bechter,
Justin R. Crepp,
Jonathan Crass,
David King
Abstract:
iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to ge…
▽ More
iLocater is a near-infrared (NIR) radial velocity (RV) spectrograph that is being developed for the Large Binocular Telescope in Arizona. Unlike seeing limited designs, iLocater uses adaptive optics to inject starlight directly into a single mode fiber. This feature offers high spectral resolution while simultaneously maintaining a compact optical design. Although this approach shows promise to generate extremely precise RV measurements, it differs from conventional Doppler spectrographs, and therefore carries additional risk. To aid with the design of the instrument, we have developed a comprehensive simulator and data reduction pipeline. In this paper, we describe the simulation code and quantify its performance in the context of understanding terms in a RV error budget. We find that the program has an intrinsic precision of $σ< 5$ cm/s, thereby justifying its use in a number of instrument trade studies. The code is written in Matlab and available for download on GitHub.
△ Less
Submitted 4 December, 2018;
originally announced December 2018.
-
Micro-lens array as tip-tilt sensor for single-mode fiber coupling
Authors:
Philipp Hottinger,
Robert J. Harris,
Philipp-Immanuel Dietrich,
Matthias Blaicher,
Martin Glück,
Andrew Bechter,
Jonathan Crass,
Jörg-Uwe Pott,
Christian Koos,
Oliver Sawodny,
Andreas Quirrenbach
Abstract:
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fiber…
▽ More
We introduce a design for a tip-tilt sensor with integrated single-mode fiber coupling for use with the front-end prototype of the iLocater spectrograph at the Large Binocular Telescope to detect vibrations that occur within the optical train. This sensor is made up of a micro-lens array printed on top of a fiber bundle consisting of a central single-mode fiber and six surrounding multi-mode fibers. The design in based on a previous prototype that utilized a multi-core fiber with seven single-mode fibers. With this updated design, we are able to achieve a better sensing throughput. We report on the modeled performance: if the beam is perfectly aligned, 69% light is coupled into the central single-mode fiber feeding the scientific instrument. When the beam is not aligned, some of the light will be coupled into the outer sensing fibers, providing the position of the beam for tip-tilt correction. For this design we show that there is a linear response in the sensing fibers when the beam is subject to tip-tilt movement. Furthermore we introduce an adaptive optics testbed, which we call the Koenigstuhl Observatory Opto-mechatronics Laboratory (KOOL), this testbed currently simulates vibrations at the Large Binocular Telescope, and in collaboration we have extended it to allow single-mode fiber coupling tests.
△ Less
Submitted 9 August, 2018;
originally announced August 2018.
-
EarthFinder: A Precise Radial Velocity Probe Mission Concept For the Detection of Earth-Mass Planets Orbiting Sun-like Stars
Authors:
Peter Plavchan,
Bryson Cale,
Patrick Newman,
Bahaa Hamze,
Natasha Latouf,
William Matzko,
Chas Beichman,
David Ciardi,
Bill Purcell,
Paul Lightsey,
Heather Cegla,
Xavier Dumusque,
Vincent Bourrier,
Courtney Dressing,
Peter Gao,
Gautam Vasisht,
Stephanie Leifer,
Sharon Wang,
Jonathan Gagne,
Samantha Thompson,
Jonathan Crass,
Andrew Bechter,
Eric Bechter,
Cullen Blake,
Sam Halverson
, et al. (18 additional authors not shown)
Abstract:
EarthFinder is a Probe Mission concept selected for study by NASA for input to the 2020 astronomy decadal survey. This study is currently active and a final white paper report is due to NASA at the end of calendar 2018. We are tasked with evaluating the scientific rationale for obtaining precise radial velocity (PRV) measurements in space, which is a two-part inquiry: What can be gained from going…
▽ More
EarthFinder is a Probe Mission concept selected for study by NASA for input to the 2020 astronomy decadal survey. This study is currently active and a final white paper report is due to NASA at the end of calendar 2018. We are tasked with evaluating the scientific rationale for obtaining precise radial velocity (PRV) measurements in space, which is a two-part inquiry: What can be gained from going to space? What can't be done form the ground? These two questions flow down to these specific tasks for our study - Identify the velocity limit, if any, introduced from micro- and macro-telluric absorption in the Earth's atmosphere; Evaluate the unique advantages that a space-based platform provides to emable the identification and mitigation of stellar acitivity for multi-planet signal recovery.
△ Less
Submitted 11 March, 2018;
originally announced March 2018.
-
iLocater: A Diffraction-limited Doppler Spectrometer for the Large Binocular Telescope
Authors:
Justin R. Crepp,
Jonathan Crass,
David King,
Andrew Bechter,
Eric Bechter,
Ryan Ketterer,
Robert Reynolds,
Philip Hinz,
Derek Kopon,
David Cavalieri,
Louis Fantano,
Corina Koca,
Eleanya Onuma,
Karl Stapelfeldt,
Joseph Thomes,
Sheila Wall,
Steven Macenka,
James McGuire,
Ronald Korniski,
Leonard Zugby,
Joshua Eisner,
B. Scott Gaudi,
Fred Hearty,
Kaitlin Kratter,
Marc Kuchner
, et al. (9 additional authors not shown)
Abstract:
We are develo** a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000)…
▽ More
We are develo** a stable and precise spectrograph for the Large Binocular Telescope (LBT) named "iLocater." The instrument comprises three principal components: a cross-dispersed echelle spectrograph that operates in the YJ-bands (0.97-1.30 microns), a fiber-injection acquisition camera system, and a wavelength calibration unit. iLocater will deliver high spectral resolution (R~150,000-240,000) measurements that permit novel studies of stellar and substellar objects in the solar neighborhood including extrasolar planets. Unlike previous planet-finding instruments, which are seeing-limited, iLocater operates at the diffraction limit and uses single mode fibers to eliminate the effects of modal noise entirely. By receiving starlight from two 8.4m diameter telescopes that each use "extreme" adaptive optics (AO), iLocater shows promise to overcome the limitations that prevent existing instruments from generating sub-meter-per-second radial velocity (RV) precision. Although optimized for the characterization of low-mass planets using the Doppler technique, iLocater will also advance areas of research that involve crowded fields, line-blanketing, and weak absorption lines.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
On-sky single-mode fiber coupling measurements at the Large Binocular Telescope
Authors:
Andrew Bechter,
Jonathan Crass,
Ryan Ketterer,
Justin R. Crepp,
Robert O. Reynolds,
Eric Bechter,
Philip Hinz,
Fernando Pedichini,
Michael Foley,
Elliott Runburg,
Eleanya Onuma,
Scott Gaudi,
Giuseppina Micela,
Isabella Pagano,
Charles E. Woodward
Abstract:
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installe…
▽ More
The demonstration of efficient single-mode fiber (SMF) coupling is a key requirement for the development of a compact, ultra-precise radial velocity (RV) spectrograph. iLocater is a next generation instrument for the Large Binocular Telescope (LBT) that uses adaptive optics (AO) to inject starlight into a SMF. In preparation for commissioning iLocater, a prototype SMF injection system was installed and tested at the LBT in the Y-band (0.970-1.065 $μ$m). This system was designed to verify the capability of the LBT AO system as well as characterize on-sky SMF coupling efficiencies. SMF coupling was measured on stars with variable airmasses, apparent magnitudes, and seeing conditions for six half-nights using the Large Binocular Telescope Interferometer. We present the overall optical and mechanical performance of the SMF injection system, including details of the installation and alignment procedure. A particular emphasis is placed on analyzing the instrument's performance as a function of telescope elevation to inform the final design of the fiber injection system for iLocater.
△ Less
Submitted 14 September, 2016;
originally announced September 2016.
-
Design of the iLocater Acquisition Camera Demonstration System
Authors:
Andrew Bechter,
Jonathan Crass,
Ryan Ketterer,
Justin R. Crepp,
David King,
Bo Zhao,
Robert Reynolds,
Philip Hinz,
Jack Brooks,
Eric Bechter
Abstract:
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater…
▽ More
Existing planet-finding spectrometers are limited by systematic errors that result from their seeing-limited design. Of particular concern is the use of multi-mode fibers (MMFs), which introduce modal noise and accept significant amounts of background radiation from the sky. We present the design of a single-mode fiber-based acquisition camera for a diffraction-limited spectrometer named "iLocater." By using the "extreme" adaptive optics (AO) system of the Large Binocular Telescope (LBT), iLocater will overcome the limitations that prevent Doppler instruments from reaching their full potential, allowing precise radial velocity (RV) measurements of terrestrial planets around nearby bright stars. The instrument presented in this paper, which we refer to as the acquisition camera "demonstration system," will measure on-sky single-mode fiber (SMF) coupling efficiency using one of the 8.4m primaries of the LBT in fall 2015.
△ Less
Submitted 16 September, 2015;
originally announced September 2015.