-
Breakdown of electroneutrality in nanopores
Authors:
Amir Levy,
J. Pedro de Souza,
Martin Z Bazant
Abstract:
Ion transport in extremely narrow nanochannels has gained increasing interest in recent years due to its unique physical properties, and the technological advances that allow us to study them. It is tempting to approach this regime with the tools and knowledge developed for wider microfluidic devices and use continuum models like the Poisson-Nernst-Planck equation. However, it turns out that some…
▽ More
Ion transport in extremely narrow nanochannels has gained increasing interest in recent years due to its unique physical properties, and the technological advances that allow us to study them. It is tempting to approach this regime with the tools and knowledge developed for wider microfluidic devices and use continuum models like the Poisson-Nernst-Planck equation. However, it turns out that some of the most basic principles we take for granted in a large system, such as electroneutrality, can breakdown under extreme confinement. We show that in a truly one-dimensional system, interacting with three-dimensional electrostatic interactions, the screening length is exponentially large in ionic spacing, and can easily exceed the macroscopic length of a nanotube. Without screening, electroneutrality is broken, and ionic transport can behave in a completely different way. In this work, we build a theoretical framework for electroneutrality breakdown in a one-dimensional nanopore and show how it provides an elegant interpretation for the peculiar scaling observed in experimental measurements of ionic conductance in carbon nanotubes.
△ Less
Submitted 10 February, 2020; v1 submitted 14 May, 2019;
originally announced May 2019.
-
Dip-coating of suspensions
Authors:
A. Gans,
E. Dressaire,
B. Colnet,
G. Saingier,
M. Z. Bazant,
A. Sauret
Abstract:
Withdrawing a plate from a suspension leads to the entrainment of a coating layer of fluid and particles on the solid surface. In this article, we study the Landau-Levich problem in the case of a suspension of non-Brownian particles at moderate volume fraction $10\% < φ< 41\%$. We observe different regimes depending on the withdrawal velocity $U$, the volume fraction of the suspension $φ$, and the…
▽ More
Withdrawing a plate from a suspension leads to the entrainment of a coating layer of fluid and particles on the solid surface. In this article, we study the Landau-Levich problem in the case of a suspension of non-Brownian particles at moderate volume fraction $10\% < φ< 41\%$. We observe different regimes depending on the withdrawal velocity $U$, the volume fraction of the suspension $φ$, and the diameter of the particles $2\,a$. Our results exhibit three coating regimes. (i) At small enough capillary number $Ca$, no particles are entrained, and only a liquid film coats the plate. (ii) At large capillary number, we observe that the thickness of the entrained film of suspension is captured by the Landau-Levich law using the effective viscosity of the suspension $η(φ)$. (iii) At intermediate capillary numbers, the situation becomes more complicated with a heterogeneous coating on the substrate. We rationalize our experimental findings by providing the domain of existence of these three regimes as a function of the fluid and particles properties.
△ Less
Submitted 22 March, 2019;
originally announced March 2019.
-
Continuum theory of electrostatic correlations at charged surfaces
Authors:
J. Pedro de Souza,
Martin Z. Bazant
Abstract:
The standard model for diffuse charge phenomena in colloid science, electrokinetics and biology is the Poisson-Boltzmann mean-field theory, which breaks down for multivalent ions and large surface charge densities due to electrostatic correlations. In this paper, we formulate a predictive continuum theory of correlated electrolytes based on two extensions of the Bazant-Storey-Kornyshev (BSK) frame…
▽ More
The standard model for diffuse charge phenomena in colloid science, electrokinetics and biology is the Poisson-Boltzmann mean-field theory, which breaks down for multivalent ions and large surface charge densities due to electrostatic correlations. In this paper, we formulate a predictive continuum theory of correlated electrolytes based on two extensions of the Bazant-Storey-Kornyshev (BSK) framework: (i) a physical boundary condition enforcing continuity of the Maxwell stress at a charged interface, which upholds the Contact Theorem for dilute primitive-model electrolytes, and (ii) scaling relationships for the correlation length, for a one-component plasma at a charged plane and around a cylinder, as well as a dilute z:1 electrolyte screening a planar surface. In these cases, the theory accurately reproduces Monte Carlo simulation results from weak to strong coupling, and extensions are possible for more complex models of electrolytes and ionic liquids.
△ Less
Submitted 13 February, 2020; v1 submitted 14 February, 2019;
originally announced February 2019.
-
Deionization Shock Driven by Electroconvection in a Circular Channel
Authors:
Zhibo Gu,
Bingrui Xu,
Peng Huo,
Shmuel M. Rubinstein,
Martin Z. Bazant,
Daosheng Deng
Abstract:
In a circular channel passing over-limiting current (faster than diffusion), transient vortices of bulk electroconvection are observed in salt-depleted region within the horizontal plane. The spatiotemporal evolution of the salt concentration is directly visualized, revealing the propagation of a deionization shock wave driven by bulk electroconvection up to millimeter scales. This novel mechanism…
▽ More
In a circular channel passing over-limiting current (faster than diffusion), transient vortices of bulk electroconvection are observed in salt-depleted region within the horizontal plane. The spatiotemporal evolution of the salt concentration is directly visualized, revealing the propagation of a deionization shock wave driven by bulk electroconvection up to millimeter scales. This novel mechanism leads to quantitatively similar dynamics as for deionization shocks in charged porous media, which are driven instead by surface conduction and electro-osmotic flow at micron to nanometer scales. The remarkable generality of deionization shocks under over-limiting current could be used to manipulate ion transport in complex geometries for desalination and water treatment.
△ Less
Submitted 11 June, 2019; v1 submitted 29 January, 2019;
originally announced January 2019.
-
Population dynamics of driven autocatalytic reactive mixtures
Authors:
Hongbo Zhao,
Martin Z. Bazant
Abstract:
Motivated by the theory of reaction kinetics based on nonequilibrium thermodynamics and the linear stability of driven reaction-diffusion, we apply the Fokker-Planck equation to describe the population dynamics of an ensemble of reactive particles in contact with a chemical reservoir. We illustrate the effect of autocatalysis on the population dynamics by comparing systems with identical thermodyn…
▽ More
Motivated by the theory of reaction kinetics based on nonequilibrium thermodynamics and the linear stability of driven reaction-diffusion, we apply the Fokker-Planck equation to describe the population dynamics of an ensemble of reactive particles in contact with a chemical reservoir. We illustrate the effect of autocatalysis on the population dynamics by comparing systems with identical thermodynamics yet different reaction kinetics. The dynamic phase behavior of the system may be entirely different from what its thermodynamics may suggest. By defining phase separation for a particle ensemble to be when the probability distribution is bimodal, we find that thermodynamic phase separation may be suppressed by autoinhibitory reactions, while autocatalysis enhances phase separation and in some cases induce the ensemble that consists of thermodynamically single-phase systems to segregate into two distinct populations, which we term fictitious phase separation. Asymmetric reaction kinetics also results in qualitatively different population dynamics upon reversing the reaction direction. In the limit of negligible fluctuations, we use method of characteristics and linearization to study the evolution of the standard deviation of concentration as well as the condition for phase separation, in good agreement with the full numerical solution. Applications are discussed to Li-ion batteries and {\it in situ} x-ray diffraction.
△ Less
Submitted 16 January, 2019;
originally announced January 2019.
-
Linear stability analysis of transient electrodeposition in charged porous media: suppression of dendritic growth by surface conduction
Authors:
Edwin Khoo,
Hongbo Zhao,
Martin Z. Bazant
Abstract:
We study the linear stability of transient electrodeposition in a charged random porous medium, whose pore surface charges can be of any sign, flanked by a pair of planar metal electrodes. Discretization of the linear stability problem results in a generalized eigenvalue problem for the dispersion relation that is solved numerically, which agrees well with the analytical approximation obtained fro…
▽ More
We study the linear stability of transient electrodeposition in a charged random porous medium, whose pore surface charges can be of any sign, flanked by a pair of planar metal electrodes. Discretization of the linear stability problem results in a generalized eigenvalue problem for the dispersion relation that is solved numerically, which agrees well with the analytical approximation obtained from a boundary layer analysis valid at high wavenumbers. Under galvanostatic conditions in which an overlimiting current is applied, in the classical case of zero surface charges, the electric field at the cathode diverges at Sand's time due to electrolyte depletion. The same phenomenon happens for positive charges but earlier than Sand's time. However, negative charges allow the system to sustain an overlimiting current via surface conduction past Sand's time, kee** the electric field bounded. Therefore, at Sand's time, negative charges greatly reduce surface instabilities and suppress dendritic growth, while zero and positive charges magnify them. We compare theoretical predictions for overall surface stabilization with published experimental data for copper electrodeposition in cellulose nitrate membranes and demonstrate good agreement between theory and experiment. We also apply the stability analysis to how crystal grain size varies with duty cycle during pulse electroplating.
△ Less
Submitted 7 July, 2019; v1 submitted 15 January, 2019;
originally announced January 2019.
-
Impact of Network Heterogenity on Nonlinear Electrokinetic Transport in Porous Media
Authors:
Shima Alizadeh,
Martin Z. Bazant,
Ali Mani
Abstract:
We present a numerical study of nonlinear electrokinetic transport in porous media, focusing on the role of heterogeneity in a porous microstructure on ion concentration polarization and over-limiting current. For simplicity, the porous medium is modeled as a network of long, thin charged cylindrical pores, each governed by one-dimensional effective transport equations. For weak surface conduction…
▽ More
We present a numerical study of nonlinear electrokinetic transport in porous media, focusing on the role of heterogeneity in a porous microstructure on ion concentration polarization and over-limiting current. For simplicity, the porous medium is modeled as a network of long, thin charged cylindrical pores, each governed by one-dimensional effective transport equations. For weak surface conduction, when sufficiently large potential is applied, we demonstrate that electrokinetic transport in a porous network can be dominated by electroconvection via internally induced flow loops, which is not properly captured by existing homogenized models. We systematically vary the topology and "accessivity" of the pore network and compare with simulations of traditional homogenized parallel-pore (capillary-bundle) models, in order to reveal the effects of regular and hierarchical connectivity. Our computational framework sheds light on the complex physics of nonlinear electrokinetic phenomena in microstructures and may be used to design porous media for applications, such as water desalination and purification by shock electrodialysis.
△ Less
Submitted 8 January, 2019;
originally announced January 2019.
-
Electrochemical kinetics of SEI growth on carbon black, II: Modeling
Authors:
Supratim Das,
Peter M. Attia,
William C. Chueh,
Martin Z. Bazant
Abstract:
Mathematical models of capacity fade can reduce the time and cost of lithium-ion battery development and deployment, and growth of the solid-electrolyte interphase (SEI) is a major source of capacity fade. Experiments in Part I reveal nonlinear voltage dependence and strong charge-discharge asymmetry in SEI growth on carbon black negative electrodes, which is not captured by previous models. Here,…
▽ More
Mathematical models of capacity fade can reduce the time and cost of lithium-ion battery development and deployment, and growth of the solid-electrolyte interphase (SEI) is a major source of capacity fade. Experiments in Part I reveal nonlinear voltage dependence and strong charge-discharge asymmetry in SEI growth on carbon black negative electrodes, which is not captured by previous models. Here, we present a theoretical model for the electrochemical kinetics of SEI growth coupled to lithium intercalation, which accurately predicts experimental results with few adjustable parameters. The key hypothesis is that the initial SEI is a mixed ion-electron conductor, and its electronic conductivity varies approximately with the square of the local lithium concentration, consistent with hop** conduction of electrons along percolating networks. By including a lithium-ion concentration dependence for the electronic conductivity in the SEI, the bulk SEI thus modulates the overpotential and exchange current of the electrolyte reduction reaction. As a result, SEI growth is promoted during lithiation but suppressed during delithiation. This new insight establishes the fundamental electrochemistry of SEI growth kinetics. Our model improves upon existing models by introducing the effects of electrochemical SEI growth and its dependence on potential, current magnitude, and current direction in predicting capacity fade.
△ Less
Submitted 4 January, 2019;
originally announced January 2019.
-
Electrochemical kinetics of SEI growth on carbon black, I: Experiments
Authors:
Peter M. Attia,
Supratim Das,
Stephen J. Harris,
Martin Z. Bazant,
William C. Chueh
Abstract:
Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current dire…
▽ More
Growth of the solid electrolyte interphase (SEI) is a primary driver of capacity fade in lithium-ion batteries. Despite its importance to this device and intense research interest, the fundamental mechanisms underpinning SEI growth remain unclear. In Part I of this work, we present an electroanalytical method to measure the dependence of SEI growth on potential, current magnitude, and current direction during galvanostatic cycling of carbon black/Li half cells. We find that SEI growth strongly depends on all three parameters; most notably, we find SEI growth rates increase with nominal C rate and are significantly higher on lithiation than on delithiation. We observe this directional effect in both galvanostatic and potentiostatic experiments and discuss hypotheses that could explain this observation. This work identifies a strong coupling between SEI growth and charge storage (e.g., intercalation and capacitance) in carbon negative electrodes.
△ Less
Submitted 14 January, 2019; v1 submitted 4 January, 2019;
originally announced January 2019.
-
Phase separation of stable colloidal clusters
Authors:
Thomas Petersen,
Martin Z. Bazant,
Roland J. M. Pellenq,
Franz-Josef Ulm
Abstract:
This Article presents a nonequilibrium thermodynamic theory for the mean-field precipitation, aggregation and pattern formation of colloidal clusters. A variable gradient energy coefficient and the arrest of particle diffusion upon "jamming" of cluster aggregates in the spinodal region predicts observable gel patterns that, at high inter-cluster attraction, form system-spanning, out-of-equilibrium…
▽ More
This Article presents a nonequilibrium thermodynamic theory for the mean-field precipitation, aggregation and pattern formation of colloidal clusters. A variable gradient energy coefficient and the arrest of particle diffusion upon "jamming" of cluster aggregates in the spinodal region predicts observable gel patterns that, at high inter-cluster attraction, form system-spanning, out-of-equilibrium networks with glass-like, quasi-static structural relaxation. For reactive systems, we incorporate the free energy landscape of stable pre-nucleation clusters into the Allen-Cahn-Reaction equation. We show that pattern formation is dominantly controlled by the Damköhler number and the stability of the clusters, which modifies the auto-catalytic rate of precipitation. As clusters individually become more stable, bulk phase separation is suppressed.
△ Less
Submitted 15 October, 2018; v1 submitted 8 September, 2018;
originally announced September 2018.
-
Microscopic theory of capillary pressure hysteresis based on pore-space accessivity and radius-resolved saturation
Authors:
Zongyu Gu,
Martin Z. Bazant
Abstract:
Continuum models of porous media use macroscopic parameters and state variables to capture essential features of pore-scale physics. We propose a macroscopic property "accessivity" ($α$) to characterize the network connectivity of different sized pores in a porous medium, and macroscopic state descriptors "radius-resolved saturations" ($ψ_w(F),ψ_n(F)$) to characterize the distribution of fluid pha…
▽ More
Continuum models of porous media use macroscopic parameters and state variables to capture essential features of pore-scale physics. We propose a macroscopic property "accessivity" ($α$) to characterize the network connectivity of different sized pores in a porous medium, and macroscopic state descriptors "radius-resolved saturations" ($ψ_w(F),ψ_n(F)$) to characterize the distribution of fluid phases within. Small accessivity ($α\to0$) implies serial connections between different sized pores, while large accessivity ($α\to1$) corresponds to more parallel arrangements, as the classical capillary bundle model implicitly assumes. Based on these concepts, we develop a statistical theory for quasistatic immiscible drainage-imbibition in arbitrary cycles, and arrive at simple algebraic formulae for updating $ψ_n(F)$ that naturally capture capillary pressure hysteresis, with $α$ controlling the amount of hysteresis. These concepts may be used to interpret hysteretic data, upscale pore-scale observations, and formulate new constitutive laws by providing a simple conceptual framework for quantifying connectivity effects, and may have broader utility in continuum modeling of transport, reactions, and phase transformations in porous media.
△ Less
Submitted 2 October, 2018; v1 submitted 23 August, 2018;
originally announced August 2018.
-
Size-dependent phase morphologies in LiFePO4 battery particles
Authors:
Daniel A. Cogswell,
Martin Z. Bazant
Abstract:
Lithium iron phosphate (LiFePO$_4$) is the prototypical two-phase battery material, whose complex patterns of lithium ion intercalation provide a testing ground for theories of electrochemical thermodynamics. Using a depth-averaged (a-b plane) phase-field model of coherent phase separation driven by Faradaic reactions, we reconcile conflicting experimental observations of diamond-like phase patter…
▽ More
Lithium iron phosphate (LiFePO$_4$) is the prototypical two-phase battery material, whose complex patterns of lithium ion intercalation provide a testing ground for theories of electrochemical thermodynamics. Using a depth-averaged (a-b plane) phase-field model of coherent phase separation driven by Faradaic reactions, we reconcile conflicting experimental observations of diamond-like phase patterns in micron-sized platelets and surface-controlled patterns in nanoparticles. Elastic analysis predicts this morphological transition for particles whose a-axis dimension exceeds the bulk elastic stripe period. We also simulate a rich variety of non-equilibrium patterns, influenced by size-dependent spinodal points and electro-autocatalytic control of thermodynamic stability.
△ Less
Submitted 19 August, 2018;
originally announced August 2018.
-
Spin-Glass Charge Ordering in Ionic Liquids
Authors:
Amir Levy,
Michael McEldrew,
Martin Z. Bazant
Abstract:
Ionic liquids form intricate microstructures, both in the bulk and near charged surfaces. In this Letter, we show that, given the ionic positions from molecular simulations, the ionic charges minimize a "spin-glass" Hamiltonian for nearest-neighbor interactions with remarkable accuracy, for both room-temperature ionic liquids (RTIL) and water-in-salt electrolytes (WiSE). Long-range charge oscillat…
▽ More
Ionic liquids form intricate microstructures, both in the bulk and near charged surfaces. In this Letter, we show that, given the ionic positions from molecular simulations, the ionic charges minimize a "spin-glass" Hamiltonian for nearest-neighbor interactions with remarkable accuracy, for both room-temperature ionic liquids (RTIL) and water-in-salt electrolytes (WiSE). Long-range charge oscillations in ionic liquids thus result from positional ordering, which is maximized in ionic solids, but gradually disappears with added solvent. As the electrolyte becomes more disordered, geometrical frustration in the spin-glass ground state reduces correlation lengths. Eventually, thermal fluctuations excite the system from its ground state, and Poisson-Boltzmann behavior is recovered. More generally, spin-glass ordering arises in any liquid with anti-ferromagnetic correlations, such as 2D vortex patterns in super-fluids or bacterial turbulence.
△ Less
Submitted 18 August, 2018;
originally announced August 2018.
-
Theory of The Double Layer in Water-in-Salt Electrolytes
Authors:
Michael McEldrew,
Zachary A. H. Goodwin,
Alexei A. Kornyshev,
Martin Z. Bazant
Abstract:
One challenge in develo** the next generation of lithium-ion batteries is the replacement of organic electrolytes, which are flammable and most often contain toxic and thermally unstable lithium salts, with safer, environmentally friendly alternatives. Recently developed Water-in-Salt Electrolytes (WiSEs) were found to be a promising alternative, having also enhanced electrochemical stability. I…
▽ More
One challenge in develo** the next generation of lithium-ion batteries is the replacement of organic electrolytes, which are flammable and most often contain toxic and thermally unstable lithium salts, with safer, environmentally friendly alternatives. Recently developed Water-in-Salt Electrolytes (WiSEs) were found to be a promising alternative, having also enhanced electrochemical stability. In this work, we develop a simple modified Poisson-Fermi theory, which demonstrates the fine interplay between electrosorption, solvation, and ion correlations. The phenomenological parameters are extracted from molecular simulations, also performed here. The theory reproduces the electrical double layer structure of WiSEs with remarkable accuracy.
△ Less
Submitted 18 August, 2018;
originally announced August 2018.
-
Thermodynamics of Ion Separation by Electrosorption
Authors:
Ali Hemmatifar,
Ashwin Ramachandran,
Kang Liu,
Diego I. Oyarzun,
Martin Z. Bazant,
Juan G. Santiago
Abstract:
We present a simple, top-down approach for the calculation of minimum energy consumption of electrosorptive ion separation using variational form of the (Gibbs) free energy. We focus and expand on the case of electrostatic capacitive deionization (CDI), and the theoretical framework is independent of details of the double-layer charge distribution and is applicable to any thermodynamically consist…
▽ More
We present a simple, top-down approach for the calculation of minimum energy consumption of electrosorptive ion separation using variational form of the (Gibbs) free energy. We focus and expand on the case of electrostatic capacitive deionization (CDI), and the theoretical framework is independent of details of the double-layer charge distribution and is applicable to any thermodynamically consistent model, such as the Gouy-Chapman-Stern (GCS) and modified Donnan (mD) models. We demonstrate that, under certain assumptions, the minimum required electric work energy is indeed equivalent to the free energy of separation. Using the theory, we define the thermodynamic efficiency of CDI. We explore the thermodynamic efficiency of current experimental CDI systems and show that these are currently very low, less than 1% for most existing systems. We applied this knowledge and constructed and operated a CDI cell to show that judicious selection of the materials, geometry, and process parameters can be used to achieve a 9% thermodynamic efficiency (4.6 kT energy per removed ion). This relatively high value is, to our knowledge, by far the highest thermodynamic efficiency ever demonstrated for CDI. We hypothesize that efficiency can be further improved by further reduction of CDI cell series resistances and optimization of operational parameters.
△ Less
Submitted 30 March, 2018;
originally announced March 2018.
-
Capillary stress and structural relaxation in moist granular materials
Authors:
Tingtao Zhou,
Katerina Ioannidou,
Enrico Masoero,
Mohammad Mirzadeh,
Roland J. -M. Pellenq,
Martin Z. Bazant
Abstract:
We propose a theoretical framework to calculate capillary stresses in complex mesoporous materials, such as moist sand, nanoporous hydrates, and drying colloidal films. Molecular simulations are mapped onto a phase-field model of the liquid-vapor mixture, whose inhomogeneous stress tensor is integrated over Voronoi polyhedra in order to calculate equal and opposite forces between each pair of neig…
▽ More
We propose a theoretical framework to calculate capillary stresses in complex mesoporous materials, such as moist sand, nanoporous hydrates, and drying colloidal films. Molecular simulations are mapped onto a phase-field model of the liquid-vapor mixture, whose inhomogeneous stress tensor is integrated over Voronoi polyhedra in order to calculate equal and opposite forces between each pair of neighboring grains. The method is illustrated by simulations of moisture-induced forces in small clusters and random packings of spherical grains using lattice-gas Density Functional Theory. For a nano-granular model of cement hydrates, this approach reproduces the hysteretic water sorption/desorption isotherms and predicts drying shrinkage strain isotherm in good agreement with experiments. We show that capillary stress is an effective mechanism for internal stress relaxation in colloidal random packings, which contributes to the extraordinary durability of cement paste.
△ Less
Submitted 24 December, 2018; v1 submitted 15 March, 2018;
originally announced March 2018.
-
Interplay of phase boundary anisotropy and electro-autocatalytic surface reactions on the lithium intercalation dynamics in Li$_X$FePO$_4$ platelet-like nanoparticles
Authors:
Neel Nadkarni,
Elisha Rejovitzky,
Dimitrios Fraggedakis,
Claudio V. Di Leo,
Raymond B. Smith,
Peng Bai,
Martin Z. Bazant
Abstract:
Experiments on single crystal Li$_X$FePO$_4$ (LFP) nanoparticles indicate rich nonequilibrium phase behavior, such as suppression of phase separation at high lithiation rates, striped patterns of coherent phase boundaries, nucleation by binarysolid surface wetting and intercalation waves. These observations have been successfully predicted (prior to the experiments) by 1D depth-averaged phase-fiel…
▽ More
Experiments on single crystal Li$_X$FePO$_4$ (LFP) nanoparticles indicate rich nonequilibrium phase behavior, such as suppression of phase separation at high lithiation rates, striped patterns of coherent phase boundaries, nucleation by binarysolid surface wetting and intercalation waves. These observations have been successfully predicted (prior to the experiments) by 1D depth-averaged phase-field models, which neglect any subsurface phase separation. In this paper, using an electro-chemo-mechanical phase-field model, we investigate the coherent non-equilibrium subsurface phase morphologies that develop in the $ab$- plane of platelet-like single-crystal platelet-like Li$_X$FePO$_4$ nanoparticles. Finite element simulations are performed for 2D plane-stress conditions in the $ab$- plane, and validated by 3D simulations, showing similar results. We show that the anisotropy of the interfacial tension tensor, coupled with electroautocatalytic surface intercalation reactions, plays a crucial role in determining the subsurface phase morphology. With isotropic interfacial tension, subsurface phase separation is observed, independent of the reaction kinetics, but for strong anisotropy, phase separation is controlled by surface reactions, as assumed in 1D models. Moreover, the driven intercalation reaction suppresses phase separation during lithiation, while enhancing it during delithiation, by electro-autocatalysis, in quantitative agreement with {\it in operando} imaging experiments in single-crystalline nanoparticles, given measured reaction rate constants.
△ Less
Submitted 16 February, 2018;
originally announced February 2018.
-
Towards optimal performance and in-depth understanding of spinel Li$_4$Ti$_5$O$_{12}$ electrodes through phase field modeling
Authors:
Alexandros Vasileiadis,
Niek J. J. de Klerk,
Raymond B. Smith,
Swapna Ganapathy,
Peter Paul R. M. L. Harks,
Martin Z. Bazant,
Marnix Wagemaker
Abstract:
Computational modeling is vital for the fundamental understanding of processes in Li-ion batteries. However, capturing nanoscopic to mesoscopic phase thermodynamics and kinetics in the solid electrode particles embedded in realistic electrode morphologies is challenging. In particular for electrode materials displaying a first order phase transition, such as LiFePO$_4$, graphite and spinel Li$_4$T…
▽ More
Computational modeling is vital for the fundamental understanding of processes in Li-ion batteries. However, capturing nanoscopic to mesoscopic phase thermodynamics and kinetics in the solid electrode particles embedded in realistic electrode morphologies is challenging. In particular for electrode materials displaying a first order phase transition, such as LiFePO$_4$, graphite and spinel Li$_4$Ti$_5$O$_{12}$ (LTO), predicting the macroscopic electrochemical behavior requires an accurate physical model. Herein, we present a thermodynamic phase field model for Li-ion insertion in LTO which captures the performance limitations presented in literature as a function of all relevant electrode parameters. The phase stability in the model is based on ab-initio DFT calculations and the Li-ion diffusion parameters on nanoscopic NMR measurements of Li-ion mobility, resulting in a parameter free model. The direct comparison with prepared electrodes shows good agreement over three orders of magnitude in the discharge current. Overpotentials associated with the various charge transport processes, as well as the active particle fraction relevant for local hotspots in batteries, are analyzed. It is demonstrated which process limits the electrode performance under a variety of realistic conditions, providing comprehensive understanding of the nanoscopic to microscopic properties. These results provide concrete directions towards the design of optimally performing LTO electrodes.
△ Less
Submitted 16 January, 2018;
originally announced January 2018.
-
Capacitive Deionization -- defining a class of desalination technologies
Authors:
P. M. Biesheuvel,
M. Z. Bazant,
R. D. Cusick,
T. A. Hatton,
K. B. Hatzell,
M. C. Hatzell,
P. Liang,
S. Lin,
S. Porada,
J. G. Santiago,
K. C. Smith,
M. Stadermann,
X. Su,
X. Sun,
T. D. Waite,
A. van der Wal,
J. Yoon,
R. Zhao,
L. Zou,
M. E. Suss
Abstract:
Over the past decade, capacitive deionization (CDI) has realized a surge in attention in the field of water desalination and can now be considered as an important technology class, along with reverse osmosis and electrodialysis. While many of the recently developed technologies no longer use a mechanism that follows the strict definition of the term "capacitive", these methods nevertheless share m…
▽ More
Over the past decade, capacitive deionization (CDI) has realized a surge in attention in the field of water desalination and can now be considered as an important technology class, along with reverse osmosis and electrodialysis. While many of the recently developed technologies no longer use a mechanism that follows the strict definition of the term "capacitive", these methods nevertheless share many common elements that encourage treating them with similar metrics and analyses. Specifically, they all involve electrically driven removal of ions from a feed stream, storage in an electrode (i.e., ion electrosorption) and release, in charge/discharge cycles. Grou** all these methods in the technology class of CDI makes it possible to treat evolving new technologies in standardized terms and compare them to other technologies in the same class.
△ Less
Submitted 18 July, 2017;
originally announced September 2017.
-
Theory of voltammetry in charged porous media
Authors:
Edwin Khoo,
Martin Z. Bazant
Abstract:
We couple the Leaky Membrane Model, which describes the diffusion and electromigration of ions in a homogenized porous medium of fixed background charge, with Butler-Volmer reaction kinetics for flat electrodes separated by such a medium in a simple mathematical theory of voltammetry. The model is illustrated for the prototypical case of copper electro-deposition/dissolution in aqueous charged por…
▽ More
We couple the Leaky Membrane Model, which describes the diffusion and electromigration of ions in a homogenized porous medium of fixed background charge, with Butler-Volmer reaction kinetics for flat electrodes separated by such a medium in a simple mathematical theory of voltammetry. The model is illustrated for the prototypical case of copper electro-deposition/dissolution in aqueous charged porous media. We first consider the steady state with three different experimentally relevant boundary conditions and derive analytical or semi-analytical expressions for concentration profiles, electric potential profiles, current-voltage relations and overlimiting conductances. Next, we perform nonlinear least squares fitting on experimental data, consider the transient response for linear sweep voltammetry and demonstrate good agreement of the model predictions with experimental data. The experimental datasets are for copper electrodeposition from copper(II) sulfate solutions in a variety of nanoporous media, such as anodic aluminum oxide, cellulose nitrate and polyethylene battery separators, whose internal surfaces are functionalized with positively and negatively charged polyelectrolyte polymers.
△ Less
Submitted 21 January, 2018; v1 submitted 15 September, 2017;
originally announced September 2017.
-
Electrochemical Impedance Imaging via the Distribution of Diffusion Times
Authors:
Juhyun Song,
Martin Z. Bazant
Abstract:
We develop a mathematical framework to analyze electrochemical impedance spectra in terms of a distribution of diffusion times (DDT) for a parallel array of random finite-length Warburg (diffusion) or Gerischer (reaction-diffusion) circuit elements. A robust DDT inversion method is presented based on Complex Nonlinear Least Squares (CNLS) regression with Tikhonov regularization and illustrated for…
▽ More
We develop a mathematical framework to analyze electrochemical impedance spectra in terms of a distribution of diffusion times (DDT) for a parallel array of random finite-length Warburg (diffusion) or Gerischer (reaction-diffusion) circuit elements. A robust DDT inversion method is presented based on Complex Nonlinear Least Squares (CNLS) regression with Tikhonov regularization and illustrated for three cases of nanostructured electrodes for energy conversion: (i) a carbon nanotube supercapacitor, (ii) a silicon nanowire Li-ion battery, and (iii) a porous-carbon vanadium flow battery. The results demonstrate the feasibility of non-destructive "impedance imaging" to infer microstructural statistics of random, heterogeneous materials.
△ Less
Submitted 13 September, 2017;
originally announced September 2017.
-
Simple Theory of Ionic Activity in Concentrated Electrolytes
Authors:
Sven Schlumpberger,
Martin Z. Bazant
Abstract:
The Debye-H\" uckel formula for ionic activity coefficients is extended for concentrated solutions by solving a simple model of many-body Coulomb correlations and adding the Born solvation energy. Given the bulk permittivity, our formula is able to fit activity data for diverse electrolytes with only one parameter to adjust the correlation length, which interpolates between the Bjerrum length and…
▽ More
The Debye-H\" uckel formula for ionic activity coefficients is extended for concentrated solutions by solving a simple model of many-body Coulomb correlations and adding the Born solvation energy. Given the bulk permittivity, our formula is able to fit activity data for diverse electrolytes with only one parameter to adjust the correlation length, which interpolates between the Bjerrum length and the mean ion spacing. The results show that ionic activity in most electrolytes is dominated by three types of electrostatic forces: (i) mean-field charge screening, (ii) solvation, and (iii) Coulomb correlations, both "over-screening" (charge oscillations) and "under-screening" (extending beyond the Debye screening length).
△ Less
Submitted 10 September, 2017;
originally announced September 2017.
-
Explaining key properties of lithiation in TiO$_2$-anatase Li-ion battery electrodes using phase-field modelling
Authors:
Niek J. J. de Klerk,
Alexandros Vasileiadis,
Raymond B. Smith,
Martin Z. Bazant,
Marnix Wagemaker
Abstract:
The improvement of Li-ion battery performance requires development of models that capture the essential physics and chemistry in Li-ion battery electrode materials. In this paper a novel electrochemical phase-field model is presented that captures the thermodynamic and kinetic properties of lithium-insertion in TiO$_2$-anatase, a well-known and intensively studied Li-ion battery electrode material…
▽ More
The improvement of Li-ion battery performance requires development of models that capture the essential physics and chemistry in Li-ion battery electrode materials. In this paper a novel electrochemical phase-field model is presented that captures the thermodynamic and kinetic properties of lithium-insertion in TiO$_2$-anatase, a well-known and intensively studied Li-ion battery electrode material. Previous experimental work on lithiated anatase TiO$_2$ provided all parameters necessary for the phase-field simulations, giving the opportunity to gain fundamental insight in the lithiation of anatase and validate this phase-field model. The phase-field model captures the essential experimentally observed phenomena, rationalising the impact of C-rate, particle size, surface area, and the memory effect on the performance of anatase as a Li-ion battery electrode. Thereby a comprehensive physical picture of the lithiation of anatase TiO$_2$ is provided. The results of the simulations demonstrate that the performance of anatase is limited by the formation of the poor Li-ion diffusion in the Li$_1$TiO$_2$ phase at the surface of the particles. Unlike other electrode materials, the kinetic limitations of individual anatase particles limit the performance of full electrodes. Hence, rather than improving the ionic and electronic network in electrodes, improving the performance of anatase TiO$_2$ electrodes requires preventing the formation of a blocking Li$_1$TiO$_2$ phase at the surface of particles. Additionally, the qualitative agreement of the phase-field model, containing only parameters from literature, with a broad spectrum of experiments demonstrates the capabilities of phase-field models for understanding Li-ion electrode materials, and its promise for guiding the design of electrodes through a thorough understanding of material properties and their interactions.
△ Less
Submitted 13 July, 2017; v1 submitted 29 June, 2017;
originally announced June 2017.
-
Electrokinetic Control of Viscous Fingering
Authors:
Mohammad Mirzadeh,
Martin Z. Bazant
Abstract:
We present a theory of the interfacial stability of two immiscible electrolytes under the coupled action of pressure gradients and electric fields in a Hele-Shaw cell or porous medium. Mathematically, our theory describes a phenomenon of "Vector Laplacian Growth", in which the interface moves in response to the gradient of a vector-valued potential function through a generalized mobility tensor. P…
▽ More
We present a theory of the interfacial stability of two immiscible electrolytes under the coupled action of pressure gradients and electric fields in a Hele-Shaw cell or porous medium. Mathematically, our theory describes a phenomenon of "Vector Laplacian Growth", in which the interface moves in response to the gradient of a vector-valued potential function through a generalized mobility tensor. Physically, we extend classical Saffman-Taylor problem to electrolytes by incorporating electrokinetic phenomena. A surprising prediction is that viscous fingering can be controlled by varying the injection ratio of electric current to flow rate. Beyond a critical injection ratio, stability depends only upon the relative direction of flow and current, regardless of the viscosity ratio. Possible applications include porous materials processing, electrically enhanced oil recovery, and electrokinetic remediation of contaminated soils.
△ Less
Submitted 15 September, 2017; v1 submitted 14 June, 2017;
originally announced June 2017.
-
Thermodynamic Stability of Driven Open Systems and Control of Phase Separation by Electro-autocatalysis
Authors:
Martin Z. Bazant
Abstract:
Motivated by the possibility of electrochemical control of phase separation, a variational theory of thermodynamic stability is developed for driven reactive mixtures, based on a nonlinear generalization of the Cahn-Hilliard and Allen-Cahn equations. The Glansdorff-Prigogine stability criterion is extended for driving chemical work, based on variations of nonequilibrium Gibbs free energy. Linear s…
▽ More
Motivated by the possibility of electrochemical control of phase separation, a variational theory of thermodynamic stability is developed for driven reactive mixtures, based on a nonlinear generalization of the Cahn-Hilliard and Allen-Cahn equations. The Glansdorff-Prigogine stability criterion is extended for driving chemical work, based on variations of nonequilibrium Gibbs free energy. Linear stability is generally determined by the competition of chemical diffusion and driven autocatalysis. Novel features arise for electrochemical systems, related to controlled total current (galvanostatic operation), concentration-dependent exchange current (Butler-Volmer kinetics), and negative differential reaction resistance (Marcus kinetics). The theory shows how spinodal decomposition can be controlled by solo-autocatalytic charge transfer, with only a single Faradaic reaction. Experimental evidence is presented for intercalation and electrodeposition in rechargeable batteries, and further applications are discussed in solid state ionics, electrovariable optics, electrochemical precipitation, and biological pattern formation.
△ Less
Submitted 3 April, 2017;
originally announced April 2017.
-
Multiphase Porous Electrode Theory
Authors:
Raymond B. Smith,
Martin Z. Bazant
Abstract:
Porous electrode theory, pioneered by John Newman and collaborators, provides a useful macroscopic description of battery cycling behavior, rooted in microscopic physical models rather than empirical circuit approximations. The theory relies on a separation of length scales to describe transport in the electrode coupled to intercalation within small active material particles. Typically, the active…
▽ More
Porous electrode theory, pioneered by John Newman and collaborators, provides a useful macroscopic description of battery cycling behavior, rooted in microscopic physical models rather than empirical circuit approximations. The theory relies on a separation of length scales to describe transport in the electrode coupled to intercalation within small active material particles. Typically, the active materials are described as solid solution particles with transport and surface reactions driven by concentration fields, and the thermodynamics are incorporated through fitting of the open circuit potential. This approach has fundamental limitations, however, and does not apply to phase-separating materials, for which the voltage is an emergent property of inhomogeneous concentration profiles, even in equilibrium. Here, we present a general theoretical framework for "multiphase porous electrode theory" implemented in an open-source software package called "MPET", based on electrochemical nonequilibrium thermodynamics. Cahn-Hilliard-type phase field models are used to describe the solid active materials with suitably generalized models of interfacial reaction kinetics. Classical concentrated solution theory is implemented for the electrolyte phase, and Newman's porous electrode theory is recovered in the limit of solid-solution active materials with Butler-Volmer kinetics. More general, quantum-mechanical models of Faradaic reactions are also included, such as Marcus-Hush-Chidsey kinetics for electron transfer at metal electrodes, extended for concentrated solutions. The full equations and numerical algorithms are described, and a variety of example calculations are presented to illustrate the novel features of the software compared to existing battery models.
△ Less
Submitted 27 February, 2017;
originally announced February 2017.
-
Intercalation kinetics in multiphase layered materials
Authors:
Raymond B. Smith,
Edwin Khoo,
Martin Z. Bazant
Abstract:
Many intercalation compounds possess layered structures or inter-penetrating lattices that enable phase separation into three or more stable phases, or "stages," driven by competing intra-layer and inter-layer forces. While these structures are often well characterized in equilibrium, their effects on intercalation kinetics and transport far from equilibrium are typically neglected or approximated…
▽ More
Many intercalation compounds possess layered structures or inter-penetrating lattices that enable phase separation into three or more stable phases, or "stages," driven by competing intra-layer and inter-layer forces. While these structures are often well characterized in equilibrium, their effects on intercalation kinetics and transport far from equilibrium are typically neglected or approximated by empirical solid solution models. Here, we formulate a general phase-field model with thermodynamically consistent reaction kinetics and cooperative transport to capture the dynamics of intercalation in layered materials. As an important case for Li-ion batteries, we model single particles of lithium intercalated graphite as having a periodic two-layer structure with three stable phases, corresponding to zero, one, or two layers full of lithium. The electrochemical intercalation reaction is described by a generalized Butler-Volmer equation with thermodynamic factors to account for the flexible structure of the graphene planes. The model naturally captures the "voltage staircase" discharge curves as a result of staging dynamics with internal "checkerboard" domains, which cannot be described by solid-solution models based on Fickian diffusion. On the other hand, the two-layer model is computationally expensive and excludes low-density stable phases with longer-range periodicity, so we also present a reduced model for graphite, which captures the high-density stages while fitting the low-density voltage profile as an effective solid solution. The two models illustrate the general tradeoff between the explicit modeling of periodic layers or lattices and the needs for computational efficiency and accurate fitting of experimental data.
△ Less
Submitted 15 February, 2017; v1 submitted 30 January, 2017;
originally announced January 2017.
-
Membraneless flow battery leveraging flow-through heterogeneous porous media for improved power density and reduced crossover
Authors:
Matthew E. Suss,
Kameron Conforti,
Laura Gilson,
Cullen R. Buie,
Martin Z. Bazant
Abstract:
A key factor preventing the market penetration of renewable, intermittent energy sources, such as solar, wind and wave, is the lack of cost-effective energy storage options to counteract intermittency. Here, we propose and demonstrate a novel flow battery architecture that replaces traditional ion-exchange membranes with less expensive heterogeneous flow-through porous media. We present an experim…
▽ More
A key factor preventing the market penetration of renewable, intermittent energy sources, such as solar, wind and wave, is the lack of cost-effective energy storage options to counteract intermittency. Here, we propose and demonstrate a novel flow battery architecture that replaces traditional ion-exchange membranes with less expensive heterogeneous flow-through porous media. We present an experimentally-validated model which demonstrates that our architecture promises reduced crossover of reactive species compared to typical membraneless systems employing co-laminar flows in open channels. In addition, our prototype battery exhibits significantly improved power density (0.925 W/cm2) and maximum current density (3 A/cm2) compared to previous membraneless systems.
△ Less
Submitted 14 October, 2016;
originally announced October 2016.
-
Analysis of ionic conductance of carbon nanotubes
Authors:
P. M. Biesheuvel,
M. Z. Bazant
Abstract:
We use space-charge (SC) theory (also called the capillary pore model) to describe the ionic conductance, $G$, of charged carbon nanotubes (CNTs). Based on the reversible adsorption of hydroxyl ions to CNT pore walls, we use a Langmuir isotherm for surface ionization and make calculations as function of pore size, salt concentration $c$, and pH. Using realistic values for surface site density and…
▽ More
We use space-charge (SC) theory (also called the capillary pore model) to describe the ionic conductance, $G$, of charged carbon nanotubes (CNTs). Based on the reversible adsorption of hydroxyl ions to CNT pore walls, we use a Langmuir isotherm for surface ionization and make calculations as function of pore size, salt concentration $c$, and pH. Using realistic values for surface site density and pK, SC theory well describes published experimentally data on the conductance of CNTs. At extremely low salt concentration, when the electric potential becomes uniform across the pore, and surface ionization is low, we derive the scaling $G\sim \sqrt{c}$, while for realistic salt concentrations, SC theory does not lead to a simple power law for $G(c)$.
△ Less
Submitted 5 October, 2016;
originally announced October 2016.
-
Resistive Switching in Aqueous Nanopores by Shock Electrodeposition
Authors:
Ji-Hyung Han,
Ramachandran Muralidhar,
Rainer Waser,
Martin Z. Bazant
Abstract:
Solid-state programmable metallization cells have attracted considerable attention as memristive elements for Redox-based Resistive Random Access Memory (ReRAM) for low-power and low-voltage applications. In principle, liquid-state metallization cells could offer the same advantages for aqueous systems, such as biomedical lab-on-a-chip devices, but robust resistive switching has not yet been achie…
▽ More
Solid-state programmable metallization cells have attracted considerable attention as memristive elements for Redox-based Resistive Random Access Memory (ReRAM) for low-power and low-voltage applications. In principle, liquid-state metallization cells could offer the same advantages for aqueous systems, such as biomedical lab-on-a-chip devices, but robust resistive switching has not yet been achieved in liquid electrolytes, where electrodeposition is notoriously unstable to the formation of fractal dendrites. Here, the recently discovered physics of shock electrodeposition are harnessed to stabilize aqueous copper growth in polycarbonate nanopores, whose surfaces are modified with charged polymers. Stable bipolar resistive switching is demonstrated for 500 cycles with <10s retention times, prior to any optimization of the geometry or materials.
△ Less
Submitted 24 August, 2016;
originally announced August 2016.
-
Theory of linear sweep voltammetry with diffuse charge: unsupported electrolytes, thin films, and leaky membranes
Authors:
David Yan,
Martin Z. Bazant,
P. M. Biesheuvel,
Mary C. Pugh,
Francis P. Dawson
Abstract:
Linear sweep and cyclic voltammetry techniques are important tools for electrochemists and have a variety of applications in engineering. Voltammetry has classically been treated with the Randles-Sevcik equation, which assumes an electroneutral supported electrolyte. In this paper, we provide a comprehensive mathematical theory of voltammetry in electrochemical cells with unsupported electrolytes…
▽ More
Linear sweep and cyclic voltammetry techniques are important tools for electrochemists and have a variety of applications in engineering. Voltammetry has classically been treated with the Randles-Sevcik equation, which assumes an electroneutral supported electrolyte. In this paper, we provide a comprehensive mathematical theory of voltammetry in electrochemical cells with unsupported electrolytes and for other situations where diffuse charge effects play a role, and present analytical and simulated solutions of the time-dependent Poisson-Nernst-Planck (PNP) equations with generalized Frumkin-Butler-Volmer (FBV) boundary conditions for a 1:1 electrolyte and a simple reaction. Using these solutions, we construct theoretical and simulated currentvoltage curves for liquid and solid thin films, membranes with fixed background charge, and cells with blocking electrodes. The full range of dimensionless parameters is considered, including the dimensionless Debye screening length (scaled to the electrode separation), Damkohler number (ratio of characteristic diffusion and reaction times) and dimensionless sweep rate (scaled to the thermal voltage per diffusion time). The analysis focuses on the coupling of Faradaic reactions and diffuse charge dynamics, although capacitive charging of the electrical double layers (EDL) is also studied, for early time transients at reactive electrodes and for non-reactive blocking electrodes. Our work highlights cases where diffuse charge effects are important in the context of voltammetry, and illustrates which regimes can be approximated using simple analytical expressions and which require more careful consideration.
△ Less
Submitted 15 January, 2017; v1 submitted 24 August, 2016;
originally announced August 2016.
-
Performance and Degradation of A Lithium-Bromine Rechargeable Fuel Cell Using Highly Concentrated Catholytes
Authors:
Peng Bai,
Martin Z. Bazant
Abstract:
Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here, a lithium-bromine rechargeable fuel cell using highly concentrated bromine catholytes is demonstrated with comparable specific energy, improved power density, a…
▽ More
Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here, a lithium-bromine rechargeable fuel cell using highly concentrated bromine catholytes is demonstrated with comparable specific energy, improved power density, and higher efficiency. The cell is similar in structure to a hybrid-electrolyte Li-air battery, where a lithium metal anode in nonaqueous electrolyte is separated from aqueous bromine catholytes by a lithium-ion conducting ceramic plate. The cell with a flat graphite electrode can discharge at a peak power density around 9mW cm-2 and in principle could provide a specific energy of 791.8 Wh kg-1, superior to most existing cathode materials and catholytes. It can also run in regenerative mode to recover the lithium metal anode and free bromine with 80-90% voltage efficiency, without any catalysts. Degradation of the solid electrolyte and the evaporation of bromine during deep charging are challenges that should be addressed in improved designs to fully exploit the high specific energy of liquid bromine. The proposed system offers a potential power source for long-range electric vehicles, beyond current Li-ion batteries yet close to envisioned Li-air batteries.
△ Less
Submitted 23 March, 2016;
originally announced March 2016.
-
Exact solutions and physical analogies for unidirectional flows
Authors:
Martin Z. Bazant
Abstract:
Unidirectional flow is the simplest phenomenon of fluid mechanics. Its mathematical description, the Dirichlet problem for Poisson's equation in two dimensions with constant forcing, arises in many physical contexts, such as the torsion of elastic beams, first solved by de Saint-Venant for complex shapes. Here, the literature is unified and extended by identifying seventeen physical analogies for…
▽ More
Unidirectional flow is the simplest phenomenon of fluid mechanics. Its mathematical description, the Dirichlet problem for Poisson's equation in two dimensions with constant forcing, arises in many physical contexts, such as the torsion of elastic beams, first solved by de Saint-Venant for complex shapes. Here, the literature is unified and extended by identifying seventeen physical analogies for unidirectional flow and describing their common mathematical structure. Besides classical analogies in fluid and solid mechanics, applications are discussed in stochastic processes (first passage in two dimensions), pattern formation (river growth by erosion), and electrokinetics (ion transport in nanochannels), which also involve Poisson's equation with non-constant forcing. Methods are given to construct approximate geometries that admit exact solutions, by adding harmonic functions to quadratic forms or by truncating eigenfunction expansions. Exact solutions for given geometries are also derived by conformal map**. We prove that the remarkable geometrical interpretation of Poiseuille flow in an equilateral triangular pipe (the product of the distances from an interior point to the sides) is only shared by parallel plates and unbounded equilateral wedges (with the third side hidden behind the apex). We also prove Onsager reciprocity for linear electrokinetic phenomena in straight pores of arbitrary shape and surface charge, based on the mathematics of unidirectional flow.
△ Less
Submitted 4 May, 2016; v1 submitted 13 January, 2016;
originally announced January 2016.
-
Analysis of electrolyte transport through charged nanopores
Authors:
P. B. Peters,
R. van Roij,
M. Z. Bazant,
P. M. Biesheuvel
Abstract:
We revisit the classical problem of flow of electrolyte solutions through charged capillary nanopores or nanotubes as described by the capillary pore model (also called "space charge" theory). This theory assumes very long and thin pores and uses a one-dimensional flux-force formalism which relates fluxes (electrical current, salt flux, fluid velocity) and driving forces (difference in electric po…
▽ More
We revisit the classical problem of flow of electrolyte solutions through charged capillary nanopores or nanotubes as described by the capillary pore model (also called "space charge" theory). This theory assumes very long and thin pores and uses a one-dimensional flux-force formalism which relates fluxes (electrical current, salt flux, fluid velocity) and driving forces (difference in electric potential, salt concentration, pressure). We analyze the general case with overlap** electric double layers in the pore and a nonzero axial salt concentration gradient. The 3$\times$3 matrix relating these quantities exhibits Onsager symmetry and we report a significant new simplification for the diagonal element relating axial salt flux to the gradient in chemical potential. We prove that Onsager symmetry is preserved under changes of variables, which we illustrate by transformation to a different flux-force matrix given by Gross and Osterle (1968). The capillary pore model is well-suited to describe the nonlinear response of charged membranes or nanofluidic devices for electrokinetic energy conversion and water desalination, as long as the transverse ion profiles remain in local quasi-equilibrium. As an example, we evaluate electrical power production from a salt concentration difference by reverse electrodialysis, using an efficiency vs. power diagram. We show that since the capillary pore model allows for axial gradients in salt concentration, partial loops in current, salt flux or fluid flow can develop in the pore. Predictions for macroscopic transport properties using a reduced model where the potential and concentration are assumed to be invariant with radial coordinate ("uniform potential" or "fine capillary pore" model), are close to results of the full model.
△ Less
Submitted 15 August, 2019; v1 submitted 14 December, 2015;
originally announced December 2015.
-
Asymmetric collapse by dissolution or melting in a uniform flow
Authors:
Chris H. Rycroft,
Martin Z. Bazant
Abstract:
An advection--diffusion-limited dissolution model of an object being eroded by a two-dimensional potential flow is presented. By taking advantage of the conformal invariance of the model, a numerical method is introduced that tracks the evolution of the object boundary in terms of a time-dependent Laurent series. Simulations of a variety of dissolving objects are shown, which shrink and then colla…
▽ More
An advection--diffusion-limited dissolution model of an object being eroded by a two-dimensional potential flow is presented. By taking advantage of the conformal invariance of the model, a numerical method is introduced that tracks the evolution of the object boundary in terms of a time-dependent Laurent series. Simulations of a variety of dissolving objects are shown, which shrink and then collapse to a single point in finite time. The simulations reveal a surprising exact relationship whereby the collapse point is the root of a non-analytic function given in terms of the flow velocity and the Laurent series coefficients describing the initial shape. This result is subsequently derived using residue calculus. The structure of the non-analytic function is examined for three different test cases, and a practical approach to determine the collapse point using a generalized Newton--Raphson root-finding algorithm is outlined. These examples also illustrate the possibility that the model breaks down in finite time prior to complete collapse, due to a topological singularity, as the dissolving boundary overlaps itself rather than breaking up into multiple domains (analogous to droplet pinch-off in fluid mechanics). In summary, the model raises fundamental mathematical questions about broken symmetries in finite-time singularities of both continuous and stochastic dynamical systems.
△ Less
Submitted 30 June, 2015;
originally announced July 2015.
-
Dendrite Suppression by Shock Electrodeposition in Charged Porous Media
Authors:
Ji-Hyung Han,
Miao Wang,
Peng Bai,
Fikile R. Brushett,
Martin Z. Bazant
Abstract:
It is shown that surface conduction can stabilize electrodeposition in random, charged porous media at high rates, above the diffusion-limited current. After linear sweep voltammetry and impedance spectroscopy, copper electrodeposits are visualized by scanning electron microscopy and energy dispersive spectroscopy in two different porous separators (cellulose nitrate, polyethylene), whose surfaces…
▽ More
It is shown that surface conduction can stabilize electrodeposition in random, charged porous media at high rates, above the diffusion-limited current. After linear sweep voltammetry and impedance spectroscopy, copper electrodeposits are visualized by scanning electron microscopy and energy dispersive spectroscopy in two different porous separators (cellulose nitrate, polyethylene), whose surfaces are modified by layer-by-layer deposition of positive or negative charged polyelectrolytes. Above the limiting current, surface conduction inhibits growth in the positive separators and produces irregular dendrites, while it enhances growth and suppresses dendrites behind a deionization shock in the negative separators, also leading to improved cycle life. The discovery of stable uniform growth in the random media differs from the non-uniform growth observed in parallel nanopores and cannot be explained by classical quasi-steady leaky membrane models, which always predict instability and dendritic growth. Instead, the experimental results suggest that transient electro-diffusion in random porous media imparts the stability of a deionization shock to the growing metal interface behind it. Shock electrodeposition could be exploited to enhance the cycle life and recharging rate of metal batteries or to accelerate the fabrication of metal matrix composite coatings.
△ Less
Submitted 23 March, 2016; v1 submitted 21 May, 2015;
originally announced May 2015.
-
Heterogeneous electrocatalysis in porous cathodes of solid oxide fuel cells
Authors:
Y. Fu,
S. Poizeau,
A. Bertei,
C. Qi,
A. Mohanram,
J. D. Pietras,
M. Z. Bazant
Abstract:
A general physics-based model is developed for heterogeneous electrocatalysis in porous electrodes and used to predict and interpret the impedance of solid oxide fuel cells. This model describes the coupled processes of oxygen gas dissociative adsorption and surface diffusion of the oxygen intermediate to the triple phase boundary, where charge transfer occurs. The model accurately captures the Ge…
▽ More
A general physics-based model is developed for heterogeneous electrocatalysis in porous electrodes and used to predict and interpret the impedance of solid oxide fuel cells. This model describes the coupled processes of oxygen gas dissociative adsorption and surface diffusion of the oxygen intermediate to the triple phase boundary, where charge transfer occurs. The model accurately captures the Gerischer-like frequency dependence and the oxygen partial pressure dependence of the impedance of symmetric cathode cells. Digital image analysis of the microstructure of the cathode functional layer in four different cells directly confirms the predicted connection between geometrical properties and the impedance response. As in classical catalysis, the electrocatalytic activity is controlled by an effective Thiele modulus, which is the ratio of the surface diffusion length (mean distance from an adsorption site to the triple phase boundary) to the surface boundary layer length (square root of surface diffusivity divided by the adsorption rate constant). The Thiele modulus must be larger than one in order to maintain high surface coverage of reaction intermediates, but care must be taken in order to guarantee a sufficient triple phase boundary density. The model also predicts the Sabatier volcano plot with the maximum catalytic activity corresponding to the proper equilibrium surface fraction of adsorbed oxygen adatoms. These results provide basic principles and simple analytical tools to optimize porous microstructures for efficient electrocatalysis.
△ Less
Submitted 3 December, 2014;
originally announced December 2014.
-
Multicomponent Gas Diffusion in Porous Electrodes
Authors:
Yeqing Fu,
Yi Jiang,
Abhijit Dutta,
Aravind Mohanram,
John D. Pietras,
Martin Z. Bazant
Abstract:
Multicomponent gas transport is investigated with unprecedented precision by AC impedance analysis of porous YSZ anode-supported solid oxide fuel cells. A fuel gas mixture of H2-H2O-N2 is fed to the anode, and impedance data are measured across the range of hydrogen partial pressure (10-100%) for open circuit conditions at three temperatures (800C, 850C and 900C) and for 300mA applied current at 8…
▽ More
Multicomponent gas transport is investigated with unprecedented precision by AC impedance analysis of porous YSZ anode-supported solid oxide fuel cells. A fuel gas mixture of H2-H2O-N2 is fed to the anode, and impedance data are measured across the range of hydrogen partial pressure (10-100%) for open circuit conditions at three temperatures (800C, 850C and 900C) and for 300mA applied current at 800C. For the first time, analytical formulae for the diffusion resistance (Rb) of three standard models of multicomponent gas transport (Fick, Stefan-Maxwell, and Dusty Gas) are derived and tested against the impedance data. The tortuosity is the only fitting parameter since all the diffusion coefficients are known. Only the Dusty Gas model leads to a remarkable data collapse for over twenty experimental conditions, using a constant tortuosity consistent with permeability measurements and the Bruggeman relation. These results establish the accuracy of the Dusty Gas model for multicomponent gas diffusion in porous media and confirm the efficacy of electrochemical impedance analysis to precisely determine transport mechanisms.
△ Less
Submitted 10 September, 2014;
originally announced September 2014.
-
Experimental Verification of Overlimiting Current by Surface Conduction and Electro-osmotic Flow in Microchannels
Authors:
Sungmin Nam,
Inhee Cho,
Joonseong Heo,
Geunbae Lim,
Martin Z. Bazant,
Gunyong Sung,
Sung Jae Kim
Abstract:
Possible mechanisms of overlimiting current in unsupported electrolytes, exceeding diffusion limitation, have been intensely studied for their fundamental significance and applications to desalination, separations, sensing, and energy storage. In bulk membrane systems, the primary physical mechanism is electro-convection, driven by electro-osmotic instability on the membrane surface. It has recent…
▽ More
Possible mechanisms of overlimiting current in unsupported electrolytes, exceeding diffusion limitation, have been intensely studied for their fundamental significance and applications to desalination, separations, sensing, and energy storage. In bulk membrane systems, the primary physical mechanism is electro-convection, driven by electro-osmotic instability on the membrane surface. It has recently been predicted that confinement by charged surfaces in microchannels or porous media favors two new mechanisms, electro-osmotic flow (EOF) and surface conduction (SC), driven by large electric fields in the depleted region acting on the electric double layers on the sidewalls. Here, we provide the first direct evidence for the transition from SC to EOF above a critical channel height, using in situ particle tracking and current-voltage measurements in a micro/nanofluidic device. The dependence of the over-limiting conductance on channel depth (d) is consistent with theoretical predictions, scaling as d^-1 for SC and d^4/5 for EOF with a transition around d=8um. This complete picture of surface-driven over-limiting current can guide engineering applications of ion concentration polarization phenomena in microfluidics and porous media.
△ Less
Submitted 10 September, 2014;
originally announced September 2014.
-
Over-limiting Current and Control of Dendritic Growth by Surface Conduction in Nanopores
Authors:
Ji-Hyung Han,
Edwin Khoo,
Peng Bai,
Martin Z. Bazant
Abstract:
Understanding over-limiting current (faster than diffusion) is a long-standing challenge in electrochemistry with applications in desalination and energy storage. Known mechanisms involve either chemical or hydrodynamic instabilities in unconfined electrolytes. Here, it is shown that over-limiting current can be sustained by surface conduction in nano pores, without any such instabilities, and use…
▽ More
Understanding over-limiting current (faster than diffusion) is a long-standing challenge in electrochemistry with applications in desalination and energy storage. Known mechanisms involve either chemical or hydrodynamic instabilities in unconfined electrolytes. Here, it is shown that over-limiting current can be sustained by surface conduction in nano pores, without any such instabilities, and used to control dendritic growth during electrodeposition. Copper electrode posits are grown in anodized aluminum oxide membranes with polyelectrolyte coatings to modify the surface charge. At low currents, uniform electroplating occurs, unaffected by surface modification due to thin electric double layers, but the morphology changes dramatically above the limiting current. With negative surface charge, growth is enhanced along the nanopore surfaces, forming surface dendrites and nanotubes behind a deionization shock. With positive surface charge, dendrites avoid the surfaces and are either guided along the nanopore centers or blocked from penetrating the membrane.
△ Less
Submitted 18 August, 2014;
originally announced August 2014.
-
Simple Formula for Marcus-Hush-Chidsey Kinetics
Authors:
Yi Zeng,
Raymond Smith,
Peng Bai,
Martin Z. Bazant
Abstract:
The Marcus-Hush-Chidsey (MHC) model is well known in electro-analytical chemistry as a successful microscopic theory of outer-sphere electron transfer at metal electrodes, but it is unfamiliar and rarely used in electrochemical engineering. One reason may be the difficulty of evaluating the MHC reaction rate, which is defined as an improper integral of the Marcus rate over the Fermi distribution o…
▽ More
The Marcus-Hush-Chidsey (MHC) model is well known in electro-analytical chemistry as a successful microscopic theory of outer-sphere electron transfer at metal electrodes, but it is unfamiliar and rarely used in electrochemical engineering. One reason may be the difficulty of evaluating the MHC reaction rate, which is defined as an improper integral of the Marcus rate over the Fermi distribution of electron energies. Here, we report a simple analytical approximation of the MHC integral that interpolates between exact asymptotic limits for large overpotentials, as well as for large or small reorganization energies, and exhibits less than 5\% relative error for all reasonable parameter values. This result enables the MHC model to be considered as a practical alternative to the ubiquitous Butler-Volmer equation for improved understanding and engineering of electrochemical systems.
△ Less
Submitted 21 July, 2014;
originally announced July 2014.
-
Membrane-less hydrogen bromine flow battery
Authors:
W. A. Braff,
M. Z. Bazant,
C. R. Buie
Abstract:
In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost is to increase the system power density while maintaining efficiency, enabling smaller stacks. Here we report on a membrane-less, hydrogen bromine laminar flow b…
▽ More
In order for the widely discussed benefits of flow batteries for electrochemical energy storage to be applied at large scale, the cost of the electrochemical stack must come down substantially. One promising avenue for reducing stack cost is to increase the system power density while maintaining efficiency, enabling smaller stacks. Here we report on a membrane-less, hydrogen bromine laminar flow battery as a potential high power density solution. The membrane-less design enables power densities of 0.795 W cm$^{-2}$ at room temperature and atmospheric pressure, with a round-trip voltage efficiency of 92\% at 25\% of peak power. Theoretical solutions are also presented to guide the design of future laminar flow batteries. The high power density achieved by the hydrogen bromine laminar flow battery, along with the potential for rechargeable operation, will translate into smaller, inexpensive systems that could revolutionize the fields of large-scale energy storage and portable power systems.
△ Less
Submitted 3 April, 2014;
originally announced April 2014.
-
Charge Transfer Kinetics at the Solid-Solid Interface in Porous Electrodes
Authors:
Peng Bai,
Martin Z. Bazant
Abstract:
Interfacial charge transfer is widely assumed to obey Butler-Volmer kinetics. For certain liquid-solid interfaces, Marcus-Hush-Chidsey theory is more accurate and predictive, but it has not been applied to porous electrodes. Here we report a simple method to extract the charge transfer rates in carbon-coated LiFePO4 porous electrodes from chronoamperometry experiments, obtaining curved Tafel plots…
▽ More
Interfacial charge transfer is widely assumed to obey Butler-Volmer kinetics. For certain liquid-solid interfaces, Marcus-Hush-Chidsey theory is more accurate and predictive, but it has not been applied to porous electrodes. Here we report a simple method to extract the charge transfer rates in carbon-coated LiFePO4 porous electrodes from chronoamperometry experiments, obtaining curved Tafel plots that contradict the Butler-Volmer equation but fit the Marcus-Hush-Chidsey prediction over a range of temperatures. The fitted reorganization energy matches the Born solvation energy for electron transfer from carbon to the iron redox site. The kinetics are thus limited by electron transfer at the solid-solid (carbon-LixFePO4) interface, rather than by ion transfer at the liquid-solid interface, as previously assumed. The proposed experimental method generalizes Chidsey's method for phase-transforming particles and porous electrodes, and the results show the need to incorporate Marcus kinetics in modeling batteries and other electrochemical systems.
△ Less
Submitted 3 April, 2014;
originally announced April 2014.
-
Inferring Pore Connectivity from Sorption Hysteresis in Multiscale Porous Media
Authors:
Matthew B. Pinson,
Tingtao Zhou,
Hamlin M. Jennings,
Martin Z. Bazant
Abstract:
Vapor adsorption experiments are widely used to assess pore size distributions, but the large hysteresis sometimes observed between sorption and desorption isotherms remains difficult to interpret. Such hysteresis is influenced pore network connectivity, which has previously been modeled by percolation on infinite lattices. Our hypothesis is that percolation occurs instead through finite networks…
▽ More
Vapor adsorption experiments are widely used to assess pore size distributions, but the large hysteresis sometimes observed between sorption and desorption isotherms remains difficult to interpret. Such hysteresis is influenced pore network connectivity, which has previously been modeled by percolation on infinite lattices. Our hypothesis is that percolation occurs instead through finite networks of micropores connecting accessible macropores, always exposed to the outside environment. We derive a general formula for sorption/desorption isotherms that introduces a simple measure of hierarchical pore connectivity -- the fraction $f$ of always exposed pores. The model thus accounts for "small world" connections in finite-size percolation, while also incorporating other hysteresis mechanisms, in single-pore filling, liquid insertion into the solid matrix, and cavitation. Our formula is able to fit and interpret both primary and scanning sorption/desorption isotherms for a variety of adsorbates (noble gases, water, and organics) and porous materials (cement pastes, dental enamels, porous glasses, carbon black and nanotubes), including cases with broad pore-size distributions and large hysteresis. It allows quantification of the prevalence of percolating macropores in the material, even though these pores are never filled during the sorption experiments. A distinct bump in sorption isotherms is explained as a lowering of the barrier to nucleation of the vapor phase with a universal temperature scaling.
△ Less
Submitted 1 July, 2018; v1 submitted 14 February, 2014;
originally announced February 2014.
-
Water Purification by Shock Electrodialysis: Deionization, Filtration, Separation, and Disinfection
Authors:
Daosheng Deng,
Wassim Aouad,
William A. Braff,
Sven Schlumpberger,
Matthew E. Suss,
Martin Z. Bazant
Abstract:
The development of energy and infrastructure efficient water purification systems are among the most critical engineering challenges facing our society. Water purification is often a multi-step process involving filtration, desalination, and disinfection of a feedstream. Shock electrodialysis (shock ED) is a newly developed technique for water desalination, leveraging the formation of ion concentr…
▽ More
The development of energy and infrastructure efficient water purification systems are among the most critical engineering challenges facing our society. Water purification is often a multi-step process involving filtration, desalination, and disinfection of a feedstream. Shock electrodialysis (shock ED) is a newly developed technique for water desalination, leveraging the formation of ion concentration polarization (ICP) zones and deionization shock waves in microscale pores near to an ion selective element. While shock ED has been demonstrated as an effective water desalination tool, we here present evidence of other simultaneous functionalities. We show that, unlike electrodialysis, shock ED can thoroughly filter micron-scale particles and aggregates of nanoparticles present in the feedwater. We also demonstrate that shock ED can enable disinfection of feedwaters, as approximately $99\%$ of viable bacteria (here \textit{E. coli}) in the inflow were killed or removed by our prototype. Shock ED also separates positive from negative particles, contrary to claims that ICP acts as a virtual barrier for all charged particles. By combining these functionalities (filtration, separation and disinfection) with deionization, shock ED has the potential to enable more compact and efficient water purification systems.
△ Less
Submitted 1 February, 2014;
originally announced February 2014.
-
Phase Transformation Dynamics in Porous Battery Electrodes
Authors:
Todd R. Ferguson,
Martin Z. Bazant
Abstract:
Porous electrodes composed of multiphase active materials are widely used in Li-ion batteries, but their dynamics are poorly understood. Two-phase models are largely empirical, and no models exist for three or more phases. Using a modified porous electrode theory based on non-equilibrium thermodynamics, we show that experimental phase behavior can be accurately predicted from free energy models, w…
▽ More
Porous electrodes composed of multiphase active materials are widely used in Li-ion batteries, but their dynamics are poorly understood. Two-phase models are largely empirical, and no models exist for three or more phases. Using a modified porous electrode theory based on non-equilibrium thermodynamics, we show that experimental phase behavior can be accurately predicted from free energy models, without artificially placing phase boundaries or fitting the open circuit voltage. First, we simulate lithium intercalation in porous iron phosphate, a popular two-phase cathode, and show that the zero-current voltage gap, slo** voltage plateau and under-estimated exchange currents all result from size-dependent nucleation and mosaic instability. Next, we simulate porous graphite, the standard anode with three stable phases, and reproduce experimentally observed fronts of color-changing phase transformations. These results provide a framework for physics-based design and control for electrochemical systems with complex thermodynamics.
△ Less
Submitted 5 February, 2014; v1 submitted 27 January, 2014;
originally announced January 2014.
-
Attractive forces in microporous carbon electrodes for capacitive deionization
Authors:
P. M. Biesheuvel,
S. Porada,
M. Levi,
M. Z. Bazant
Abstract:
The recently developed modified Donnan (mD) model provides a simple and useful description of the electrical double layer in microporous carbon electrodes, suitable for incorporation in porous electrode theory. By postulating an attractive excess chemical potential for each ion in the micropores that is inversely proportional to the total ion concentration, we show that experimental data for capac…
▽ More
The recently developed modified Donnan (mD) model provides a simple and useful description of the electrical double layer in microporous carbon electrodes, suitable for incorporation in porous electrode theory. By postulating an attractive excess chemical potential for each ion in the micropores that is inversely proportional to the total ion concentration, we show that experimental data for capacitive deionization (CDI) can be accurately predicted over a wide range of applied voltages and salt concentrations. Since the ion spacing and Bjerrum length are each comparable to the micropore size (few nm), we postulate that the attraction results from fluctuating bare Coulomb interactions between individual ions and the metallic pore surfaces (image forces) that are not captured by meanfield theories, such as the Poisson-Boltzmann-Stern model or its mathematical limit for overlap** double layers, the Donnan model. Using reasonable estimates of the micropore permittivity and mean size (and no other fitting parameters), we propose a simple theory that predicts the attractive chemical potential inferred from experiments. As additional evidence for attractive forces, we present data for salt adsorption in uncharged microporous carbons, also predicted by the theory.
△ Less
Submitted 20 January, 2014; v1 submitted 20 December, 2013;
originally announced December 2013.
-
Overlimiting Current and Shock Electrodialysis in Porous Media
Authors:
Daosheng Deng,
E. Victoria Dydek,
Ji-Hyung Han,
Sven Schlumpberger,
Ali Mani,
Boris Zaltzman,
Martin Z. Bazant
Abstract:
Most electrochemical processes, such as electrodialysis, are limited by diffusion, but in porous media, surface conduction and electro-osmotic flow also contribute to ionic fluxes. In this paper, we report experimental evidence for surface-driven over-limiting current (faster than diffusion) and deionization shocks (propagating salt removal) in a porous medium. The apparatus consists of a silica g…
▽ More
Most electrochemical processes, such as electrodialysis, are limited by diffusion, but in porous media, surface conduction and electro-osmotic flow also contribute to ionic fluxes. In this paper, we report experimental evidence for surface-driven over-limiting current (faster than diffusion) and deionization shocks (propagating salt removal) in a porous medium. The apparatus consists of a silica glass frit (1 mm thick with 500 nm mean pore size) in an aqueous electrolyte (CuSO$_4$ or AgNO$_3$) passing ionic current from a reservoir to a cation-selective membrane (Nafion). The current-voltage relation of the whole system is consistent with a proposed theory based on the electro-osmotic flow mechanism over a broad range of reservoir salt concentrations (0.1 mM - 1.0 M), after accounting for (Cu) electrode polarization and pH-regulated silica charge. Above the limiting current, deionized water ($\approx 10 μ$ $M$) can be continuously extracted from the frit, which implies the existence of a stable shock propagating against the flow, bordering a depleted region that extends more than 0.5mm across the outlet. The results suggest the feasibility of "shock electrodialysis" as a new approach to water desalination and other electrochemical separations.
△ Less
Submitted 21 October, 2013;
originally announced October 2013.
-
Particle-Level Modeling of the Charge-Discharge Behavior of Nanoparticulate Phase-Separating Li-Ion Battery Electrodes
Authors:
Bernardo Orvananos,
Todd R. Ferguson,
Hui-Chia Yu,
Martin Z. Bazant,
Katsuyo Thornton
Abstract:
In nanoparticulate phase-separating electrodes, phase separation inside the particles can be hindered during their charge/discharge cycles even when a thermodynamic driving force for phase separation exists. In such cases, particles may (de)lithiate discretely in a process referred to as mosaic instability. This instability could be the key to elucidating the complex charge/discharge dynamics in n…
▽ More
In nanoparticulate phase-separating electrodes, phase separation inside the particles can be hindered during their charge/discharge cycles even when a thermodynamic driving force for phase separation exists. In such cases, particles may (de)lithiate discretely in a process referred to as mosaic instability. This instability could be the key to elucidating the complex charge/discharge dynamics in nanoparticulate phase-separating electrodes. In this paper, the dynamics of the mosaic instability is studied using Smoothed Boundary Method simulations at the particle level, where the concentration and electrostatic potential fields are spatially resolved around individual particles. Two sets of configurations consisting of spherical particles with an identical radius are employed to study the instability in detail. The effect of an activity-dependent exchange current density on the mosaic instability, which leads to asymmetric charge/discharge, is also studied. While we show that our model reproduces the results of a porous-electrode model for the simple setup studied here, it is a powerful framework with the capability to predict the detailed dynamics in three-dimensional complex electrodes and provides further insights into the complex dynamics that result from the coupling of electrochemistry, thermodynamics, and transport kinetics.
△ Less
Submitted 25 September, 2013;
originally announced September 2013.
-
Electrochemical Impedance of a Battery Electrode with Anisotropic Active Particles
Authors:
J. Song,
M. Z. Bazant
Abstract:
Electrochemical impedance spectra for battery electrodes are usually interpreted using models that assume isotropic active particles, having uniform current density and symmetric diffusivities. While this can be reasonable for amorphous or polycrystalline materials with randomly oriented grains, modern electrode materials increasingly consist of highly anisotropic, single-crystalline, nanoparticle…
▽ More
Electrochemical impedance spectra for battery electrodes are usually interpreted using models that assume isotropic active particles, having uniform current density and symmetric diffusivities. While this can be reasonable for amorphous or polycrystalline materials with randomly oriented grains, modern electrode materials increasingly consist of highly anisotropic, single-crystalline, nanoparticles, with different impedance characteristics. In this paper, analytical expressions are derived for the impedance of anisotropic particles with tensorial diffusivities and orientation-dependent surface reaction rates and capacitances. The resulting impedance spectrum contains clear signatures of the anisotropic material properties and aspect ratio, as well as statistical variations in any of these parameters.
△ Less
Submitted 23 September, 2013;
originally announced September 2013.