-
Lithium-Ion Battery System Health Monitoring and Fault Analysis from Field Data Using Gaussian Processes
Authors:
Joachim Schaeffer,
Eric Lenz,
Duncan Gulla,
Martin Z. Bazant,
Richard D. Braatz,
Rolf Findeisen
Abstract:
Health monitoring, fault analysis, and detection are critical for the safe and sustainable operation of battery systems. We apply Gaussian process resistance models on lithium iron phosphate battery field data to effectively separate the time-dependent and operating point-dependent resistance. The data set contains 29 battery systems returned to the manufacturer for warranty, each with eight cells…
▽ More
Health monitoring, fault analysis, and detection are critical for the safe and sustainable operation of battery systems. We apply Gaussian process resistance models on lithium iron phosphate battery field data to effectively separate the time-dependent and operating point-dependent resistance. The data set contains 29 battery systems returned to the manufacturer for warranty, each with eight cells in series, totaling 232 cells and 131 million data rows. We develop probabilistic fault detection rules using recursive spatiotemporal Gaussian processes. These processes allow the quick processing of over a million data points, enabling advanced online monitoring and furthering the understanding of battery pack failure in the field. The analysis underlines that often, only a single cell shows abnormal behavior or a knee point, consistent with weakest-link failure for cells connected in series, amplified by local resistive heating. The results further the understanding of how batteries degrade and fail in the field and demonstrate the potential of efficient online monitoring based on data. We open-source the code and publish the large data set upon completion of the review of this article.
△ Less
Submitted 27 June, 2024;
originally announced June 2024.
-
Rugged potential of mean force and underscreening of polarizable colloids in concentrated electrolytes
Authors:
Emily Krucker-Velasquez,
Martin Z. Bazant,
Alfredo Alexander-Katz,
James W. Swan
Abstract:
This study uses advanced numerical methods to estimate the mean force potential (PMF) between charged, polarizable colloidal particles in dense electrolytes. We observe that when the Debye screening length, $λ_{\mathrm{D}}$, is below the hydrated ion size, the PMF shows discernible oscillations, contrasting with the expected decay in DLVO theory. Our findings provide evidence for the existence of…
▽ More
This study uses advanced numerical methods to estimate the mean force potential (PMF) between charged, polarizable colloidal particles in dense electrolytes. We observe that when the Debye screening length, $λ_{\mathrm{D}}$, is below the hydrated ion size, the PMF shows discernible oscillations, contrasting with the expected decay in DLVO theory. Our findings provide evidence for the existence of anomalous underscreening in electrostatically stabilized suspensions, potentially having significant implications for our understanding of colloidal stability and the forces that govern the behavior of concentrated charged soft matter systems beyond DLVO theory.
△ Less
Submitted 1 April, 2024;
originally announced April 2024.
-
Electric Field Induced Associations in the Double Layer of Salt-in-Ionic-Liquid Electrolytes
Authors:
Daniel M. Markiewitz,
Zachary A. H. Goodwin,
Michael McEldrew,
J. Pedro de Souza,
Xuhui Zhang,
Rosa M. Espinosa-Marzal,
Martin Z. Bazant
Abstract:
Ionic liquids (ILs) are an extremely exciting class of electrolytes for energy storage applications because of their unique combination of properties. Upon dissolving alkali metal salts, such as Li or Na based salts, with the same anion as the IL, an intrinsically asymmetric electrolyte can be created for use in batteries, known as a salt-in-ionic liquid (SiIL). These SiILs have been well studied…
▽ More
Ionic liquids (ILs) are an extremely exciting class of electrolytes for energy storage applications because of their unique combination of properties. Upon dissolving alkali metal salts, such as Li or Na based salts, with the same anion as the IL, an intrinsically asymmetric electrolyte can be created for use in batteries, known as a salt-in-ionic liquid (SiIL). These SiILs have been well studied in the bulk, where negative transference numbers of the alkali metal cation have been observed from the formation of small, negatively charged clusters. The properties of these SiILs at electrified interfaces, however, have received little to no attention. Here, we develop a theory for the electrical double layer (EDL) of SiILs where we consistently account for the thermoreversible association of ions into Cayley tree aggregates. The theory predicts that the IL cations first populate the EDL at negative voltages, as they are not strongly bound to the anions. However at large negative voltages which are strong enough to break the alkali metal cation-anion associations, these IL cations are exchanged for the alkali metal cation because of their higher charge density. At positive voltages, we find that the SiIL actually becomes $\textit{more aggregated while screening the electrode charge}$ from the formation of large, negatively charged aggregates. Therefore, in contrast to conventional intuition of associations in the EDL, SiILs appear to become more associated in certain electric fields. We present these theoretical predictions to be verified by molecular dynamics simulations and experimental measurements.
△ Less
Submitted 26 March, 2024; v1 submitted 6 February, 2024;
originally announced February 2024.
-
Physics-based Modeling of Pulse and Relaxation of High-rate Li/CF$_{x}$-SVO batteries in Implantable Medical Devices
Authors:
Qiaohao Liang,
Giacomo Galuppini,
Partha M. Gomadam,
Prabhakar A. Tamirisa,
Jeffrey A. Lemmerman,
Michael J. M. Mazack,
Melani G. Sullivan,
Richard D. Braatz,
Martin Z. Bazant
Abstract:
We present a physics-based model that accurately predicts the performance of Medtronic's implantable medical device battery lithium/carbon monofluoride (CF$_x$) - silver vanadium oxide (SVO) under both low-rate background monitoring and high-rate pulsing currents. The distinct properties of multiple active materials are reflected by parameterizing their thermodynamics, kinetics, and mass transport…
▽ More
We present a physics-based model that accurately predicts the performance of Medtronic's implantable medical device battery lithium/carbon monofluoride (CF$_x$) - silver vanadium oxide (SVO) under both low-rate background monitoring and high-rate pulsing currents. The distinct properties of multiple active materials are reflected by parameterizing their thermodynamics, kinetics, and mass transport properties separately. Diffusion limitations of Li$^+$ in SVO are used to explain cell voltage transient behavior during pulse and post-pulse relaxation. We also introduce change in cathode electronic conductivity, Li metal anode surface morphology, and film resistance buildup to capture evolution of cell internal resistance throughout multi-year electrical tests. We share our insights on how the Li$^+$ redistribution process between active materials can restore pulse capability of the hybrid electrode, allow CF$_x$ to indirectly contribute to capacity release during pulsing, and affect the operation protocols and design principles of batteries with other hybrid electrodes. We also discuss additional complexities in porous electrode model parameterization and electrochemical characterization techniques due to parallel reactions and solid diffusion pathways across active materials. We hope our models implemented in the Hybrid Multiphase Porous Electrode Theory (Hybrid-MPET) framework can complement future experimental research and accelerate development of multi-active material electrodes with targeted performance.
△ Less
Submitted 5 February, 2024;
originally announced February 2024.
-
A universal approximation for conductance blockade in thin nanopore membranes
Authors:
Arjav Shah,
Shakul Pathak,
Slaven Garaj,
Martin Z. Bazant,
Ankur Gupta,
Patrick S. Doyle
Abstract:
Nanopore-based sensing platforms have transformed single-molecule detection and analysis. The foundation of nanopore translocation experiments lies in conductance measurements, yet existing models, which are largely phenomenological, are inaccurate in critical experimental conditions such as thin and tightly fitting pores. Of the two components of the conductance blockade, channel and access resis…
▽ More
Nanopore-based sensing platforms have transformed single-molecule detection and analysis. The foundation of nanopore translocation experiments lies in conductance measurements, yet existing models, which are largely phenomenological, are inaccurate in critical experimental conditions such as thin and tightly fitting pores. Of the two components of the conductance blockade, channel and access resistance, the access resistance is poorly modeled. We present a comprehensive investigation into the access resistance and associated conductance blockade in thin nanopore membranes. By combining a first-principles approach, multi-scale modeling, and experimental validation, we propose a unified theoretical modeling framework. The analytical model derived as a result surpasses current approaches across a broad parameter range. Beyond advancing theoretical understanding, our framework's versatility enables analyte size inference and predictive insights into conductance blockade behavior. Our results will facilitate the design and optimization of nanopore devices for diverse applications, including nanopore base calling and data storage.
△ Less
Submitted 18 December, 2023;
originally announced December 2023.
-
Theory of chemically driven pattern formation in phase-separating liquids and solids
Authors:
Hongbo Zhao,
Martin Z. Bazant
Abstract:
Motivated by recent experimental and theoretical work on the control of phase separation by (electro-)autocatalytic reactions, we analyze pattern formation in externally driven phase separating systems described by a generalization of the Cahn-Hilliard and Allen-Cahn equations combining nonlinear reaction kinetics with diffusive transport. The theory predicts that phase separation can be suppresse…
▽ More
Motivated by recent experimental and theoretical work on the control of phase separation by (electro-)autocatalytic reactions, we analyze pattern formation in externally driven phase separating systems described by a generalization of the Cahn-Hilliard and Allen-Cahn equations combining nonlinear reaction kinetics with diffusive transport. The theory predicts that phase separation can be suppressed by driven autoinhibitory reactions when chemically driven at a sufficiently high reaction rate and low diffusivity, while autocatalytic reactions enhance phase separation. Analytical stability criteria for predicting the critical condition of suppressed phase separation based on linear stability analysis track the history dependence of pattern formation and agree well with numerical simulations. By including chemo-mechanical coupling in the model, we extend the theory to solids, where coherency strain alters the morphology and dynamics of driven phase separation. We apply this model to lithium iron phosphate nanoparticles and simulate their rate-dependent electrochemical charging and discharging patterns, paving the way for a quantitative understanding of the effect of reaction kinetics, diffusion, and mechanics on the electrochemical performance of energy materials. The theory may also find applications to microstructure formation in hardening cement paste, as well as membraneless organelle formation in biological cells by chemically controlled liquid-liquid phase separation.
△ Less
Submitted 29 September, 2023;
originally announced October 2023.
-
Interpretation of High-Dimensional Linear Regression: Effects of Nullspace and Regularization Demonstrated on Battery Data
Authors:
Joachim Schaeffer,
Eric Lenz,
William C. Chueh,
Martin Z. Bazant,
Rolf Findeisen,
Richard D. Braatz
Abstract:
High-dimensional linear regression is important in many scientific fields. This article considers discrete measured data of underlying smooth latent processes, as is often obtained from chemical or biological systems. Interpretation in high dimensions is challenging because the nullspace and its interplay with regularization shapes regression coefficients. The data's nullspace contains all coeffic…
▽ More
High-dimensional linear regression is important in many scientific fields. This article considers discrete measured data of underlying smooth latent processes, as is often obtained from chemical or biological systems. Interpretation in high dimensions is challenging because the nullspace and its interplay with regularization shapes regression coefficients. The data's nullspace contains all coefficients that satisfy $\mathbf{Xw}=\mathbf{0}$, thus allowing very different coefficients to yield identical predictions. We developed an optimization formulation to compare regression coefficients and coefficients obtained by physical engineering knowledge to understand which part of the coefficient differences are close to the nullspace. This nullspace method is tested on a synthetic example and lithium-ion battery data. The case studies show that regularization and z-scoring are design choices that, if chosen corresponding to prior physical knowledge, lead to interpretable regression results. Otherwise, the combination of the nullspace and regularization hinders interpretability and can make it impossible to obtain regression coefficients close to the true coefficients when there is a true underlying linear model. Furthermore, we demonstrate that regression methods that do not produce coefficients orthogonal to the nullspace, such as fused lasso, can improve interpretability. In conclusion, the insights gained from the nullspace perspective help to make informed design choices for building regression models on high-dimensional data and reasoning about potential underlying linear models, which are important for system optimization and improving scientific understanding.
△ Less
Submitted 6 September, 2023; v1 submitted 1 September, 2023;
originally announced September 2023.
-
Hybrid-MPET: an open-source simulation software for hybrid electrode batteries
Authors:
Qiaohao Liang,
Martin Z. Bazant
Abstract:
As the design of single-component battery electrodes has matured, the battery industry has turned to hybrid electrodes with blends of two or more active materials to enhance battery performance. Leveraging the best properties of each material while mitigating their drawbacks, multi-component hybrid electrodes open a vast new design space that could be most efficiently explored through simulations.…
▽ More
As the design of single-component battery electrodes has matured, the battery industry has turned to hybrid electrodes with blends of two or more active materials to enhance battery performance. Leveraging the best properties of each material while mitigating their drawbacks, multi-component hybrid electrodes open a vast new design space that could be most efficiently explored through simulations. In this article, we introduce a mathematical modeling framework and open-source battery simulation software package for Hybrid Multiphase Porous Electrode Theory (Hybrid-MPET), capable of accounting for the parallel reactions, phase transformations and multiscale heterogeneities in hybrid porous electrodes. Hybrid-MPET models can simulate both solid solution and multiphase active materials in hybrid electrodes at intra-particle and inter-particle scales. Its modular design also allows the combination of different active materials at any capacity fraction. To illustrate the novel features of Hybrid-MPET, we present experimentally validated models of silicon-graphite (Si-Gr) anodes used in electric vehicle batteries and carbon monofluoride (CFx) - silver vanadium oxide (SVO) cathodes used in implantable medical device batteries. The results demonstrate the potential of Hybrid-MPET models to accelerate the development of hybrid electrode batteries by providing fast predictions of their performance over a wide range of design parameters and operating protocols.
△ Less
Submitted 24 May, 2023;
originally announced May 2023.
-
Phase-Field DeepONet: Physics-informed deep operator neural network for fast simulations of pattern formation governed by gradient flows of free-energy functionals
Authors:
Wei Li,
Martin Z. Bazant,
Juner Zhu
Abstract:
Recent advances in scientific machine learning have shed light on the modeling of pattern-forming systems. However, simulations of real patterns still incur significant computational costs, which could be alleviated by leveraging large image datasets. Physics-informed machine learning and operator learning are two new emerging and promising concepts for this application. Here, we propose "Phase-Fi…
▽ More
Recent advances in scientific machine learning have shed light on the modeling of pattern-forming systems. However, simulations of real patterns still incur significant computational costs, which could be alleviated by leveraging large image datasets. Physics-informed machine learning and operator learning are two new emerging and promising concepts for this application. Here, we propose "Phase-Field DeepONet", a physics-informed operator neural network framework that predicts the dynamic responses of systems governed by gradient flows of free-energy functionals. Examples used to validate the feasibility and accuracy of the method include the Allen-Cahn and Cahn-Hilliard equations, as special cases of reactive phase-field models for nonequilibrium thermodynamics of chemical mixtures. This is achieved by incorporating the minimizing movement scheme into the framework, which optimizes and controls how the total free energy of a system evolves, instead of solving the governing equations directly. The trained operator neural networks can work as explicit time-steppers that take the current state as the input and output the next state. This could potentially facilitate fast real-time predictions of pattern-forming dynamical systems, such as phase-separating Li-ion batteries, emulsions, colloidal displays, or biological patterns.
△ Less
Submitted 26 February, 2023;
originally announced February 2023.
-
Population Effects Driving Active Material Degradation in Intercalation Electrodes
Authors:
Debbie Zhuang,
Martin Z. Bazant
Abstract:
In battery modeling, the electrode is discretized at the macroscopic scale with a single representative particle in each volume. This lacks the accurate physics to describe interparticle interactions in electrodes. To remedy this, we formulate a model that describes the evolution of degradation of a population of battery active material particles using ideas in population genetics of fitness evolu…
▽ More
In battery modeling, the electrode is discretized at the macroscopic scale with a single representative particle in each volume. This lacks the accurate physics to describe interparticle interactions in electrodes. To remedy this, we formulate a model that describes the evolution of degradation of a population of battery active material particles using ideas in population genetics of fitness evolution, where the state of a system depends on the health of each particle that contributes to the system. With the fitness formulation, the model incorporates effects of particle size and heterogeneous degradation effects which accumulate in the particles as the battery is cycled, accounting for different active material degradation mechanisms. At the particle scale, degradation progresses nonuniformly across the population of active particles, observed from the autocatalytic relationship between fitness and degradation. Electrode-level degradation is formed from various contributions of the particle-level degradation, especially from smaller particles. It is shown that specific mechanisms of particle-level degradation can be associated with characteristic signatures in the capacity-loss and voltage profiles. Conversely, certain features in the electrode-level phenomena can also provide insight into the relative importance of different particle-level degradation mechanisms.
△ Less
Submitted 24 April, 2023; v1 submitted 19 January, 2023;
originally announced January 2023.
-
Theory of Cation Solvation and Ionic Association in Non-Aqueous Solvent Mixtures
Authors:
Zachary A. H. Goodwin,
Michael McEldrew,
Boris Kozinsky,
Martin Z. Bazant
Abstract:
Conventional lithium-ion batteries, and many next-generation technologies, rely on organic electrolytes with multiple solvents to achieve the desired physicochemical and interfacial properties. The complex interplay between these properties can often be elucidated via the coordination environment of the cation. We develop a theory for the coordination shell of cations in non-aqueous solvent mixtur…
▽ More
Conventional lithium-ion batteries, and many next-generation technologies, rely on organic electrolytes with multiple solvents to achieve the desired physicochemical and interfacial properties. The complex interplay between these properties can often be elucidated via the coordination environment of the cation. We develop a theory for the coordination shell of cations in non-aqueous solvent mixtures that can be applied with high fidelity, up to super-concentrated electrolytes. Our theory can naturally explain simulation and experimental values of cation solvation in ''classical'' non-aqueous electrolytes. Moreover, we utilise our theory to understand general design principles of emerging classes of non-aqueous electrolyte mixtures, such as high entropy electrolytes. It is hoped that this theory provides a systematic framework to understand simulations and experiments which engineer the solvation structure and ionic associations of concentrated non-aqueous electrolytes.
△ Less
Submitted 3 March, 2023; v1 submitted 18 January, 2023;
originally announced January 2023.
-
Asymptotic Nusselt numbers for internal flow in the Cassie state
Authors:
Daniel Kane,
Marc Hodes,
Martin Z. Bazant,
Toby L. Kirk
Abstract:
We consider laminar, fully-developed, Poiseuille flows of liquid in the Cassie state through diabatic, parallel-plate microchannels symmetrically textured with isoflux ridges. Through the use of matched asymptotic expansions we analytically develop expressions for (apparent hydrodynamic) slip lengths and variously-defined Nusselt numbers. Our small parameter ($ε$) is the pitch of the ridges divide…
▽ More
We consider laminar, fully-developed, Poiseuille flows of liquid in the Cassie state through diabatic, parallel-plate microchannels symmetrically textured with isoflux ridges. Through the use of matched asymptotic expansions we analytically develop expressions for (apparent hydrodynamic) slip lengths and variously-defined Nusselt numbers. Our small parameter ($ε$) is the pitch of the ridges divided by the height of the microchannel. When the ridges are oriented parallel to the flow, we quantify the error in the Nusselt number expressions in the literature and provide a new closed-form result. The latter is accurate to $O\left(ε^2\right)$ and valid for any solid (ridge) fraction, whereas those in the current literature are accurate to $O\left(ε^1\right)$ and breakdown in the important limit when solid fraction approaches zero. When the ridges are oriented transverse to the (periodically fully-developed) flow, the error associated with neglecting inertial effects in the slip length is shown to be $O\left(ε^3\mathrm{Re}\right)$, where $\mathrm{Re}$ is the channel-scale Reynolds number based on its hydraulic diameter. The corresponding Nusselt number expressions are new and their accuracy is shown to be dependent on Reynolds number, Peclet number and Prandtl number in addition to $ε$. Manipulating the solution to the inner temperature problem encountered in the vicinity of the ridges shows that classic results for thermal spreading resistance are better expressed in terms of polylogarithm functions.
△ Less
Submitted 24 November, 2022;
originally announced November 2022.
-
Theory of layered-oxide cathode degradation in Li-ion batteries by oxidation-induced cation disorder
Authors:
Debbie Zhuang,
Martin Z. Bazant
Abstract:
Disorder-driven degradation phenomena, such as structural phase transformations and surface reconstructions, can significantly reduce the lifetime of Li-ion batteries, especially those with nickel-rich layered-oxide cathodes. We develop a general free energy model for layered-oxide ion-intercalation materials as a function of the degree of disorder, which represents the density of defects in the h…
▽ More
Disorder-driven degradation phenomena, such as structural phase transformations and surface reconstructions, can significantly reduce the lifetime of Li-ion batteries, especially those with nickel-rich layered-oxide cathodes. We develop a general free energy model for layered-oxide ion-intercalation materials as a function of the degree of disorder, which represents the density of defects in the host crystal. The model accounts for defect core energies, long-range dipolar electrostatic forces, and configurational entropy of the solid solution. In the case of nickel-rich oxides, we hypothesize that nickel with a high concentration of defects is driven into the bulk by electrostatic forces as oxidation reactions at the solid-electrolyte interface reduce nickel and either evolve oxygen gas or oxidize the organic electrolyte at high potentials (>4.4V vs. Li/Li+). The model is used in battery cycling simulations to describe the extent of cathode degradation when using different voltage cutoffs, in agreement with experimental observations that lower-voltage cycling can substantially reduce cathode degradation. The theory provides a framework to guide the development of cathode compositions, coatings and electrolytes to enhance rate capability and enhance battery lifetime. The general theory of cation-disorder formation may also find applications in electrochemical water treatment and ion separations, such as lithium extraction from brines, based on competitive ion intercalation in battery materials.
△ Less
Submitted 28 November, 2022; v1 submitted 29 July, 2022;
originally announced July 2022.
-
Interfacial resistive switching by multiphase polarization in ion-intercalation nanofilms
Authors:
Huanhuan Tian,
Martin Z. Bazant
Abstract:
Nonvolatile resistive-switching (RS) memories promise to revolutionize hardware architectures with in-memory computing. Recently, ion-interclation materials have attracted increasing attention as potential RS materials for their ion-modulated electronic conductivity. In this Letter, we propose RS by multiphase polarization (MP) of ion-intercalated thin films between ion-blocking electrodes, in whi…
▽ More
Nonvolatile resistive-switching (RS) memories promise to revolutionize hardware architectures with in-memory computing. Recently, ion-interclation materials have attracted increasing attention as potential RS materials for their ion-modulated electronic conductivity. In this Letter, we propose RS by multiphase polarization (MP) of ion-intercalated thin films between ion-blocking electrodes, in which interfacial phase separation triggered by an applied voltage switches the electron-transfer resistance. We develop an electrochemical phase-field model for simulations of coupled ion-electron transport and ion-modulated electron-transfer rates and use it to analyze the MP switching current and time, resistance ratio, and current-voltage response. The model is able to reproduce the complex cyclic voltammograms of lithium titanate (LTO) memristors, which cannot be explained by existing models based on bulk dielectric breakdown. The theory predicts the achievable switching speeds for multiphase ion-intercalation materials and could be used to guide the design of high-performance MP-based RS memories.
△ Less
Submitted 30 July, 2022; v1 submitted 5 May, 2022;
originally announced May 2022.
-
Gelation, Clustering and Crowding in the Electrical Double Layer of Ionic Liquids
Authors:
Zachary A. H. Goodwin,
Michael McEldrew,
J. Pedro de Souza,
Martin Z. Bazant,
Alexei A. Kornyshev
Abstract:
Understanding the bulk and interfacial properties of super-concentrated electrolytes, such as ionic liquids (ILs), has attracted significant attention lately for their promising applications in supercapacitors and batteries. Recently, McEldrew \textit{et al.} developed a theory for reversible ion associations in bulk ILs, which accounted for the formation of all possible Cayley tree clusters and a…
▽ More
Understanding the bulk and interfacial properties of super-concentrated electrolytes, such as ionic liquids (ILs), has attracted significant attention lately for their promising applications in supercapacitors and batteries. Recently, McEldrew \textit{et al.} developed a theory for reversible ion associations in bulk ILs, which accounted for the formation of all possible Cayley tree clusters and a percolating ionic network (gel). Here we adopt and develop this approach to understand the associations of ILs in the electrical double layer at electrified interfaces. With increasing charge of the electrode, the theory predicts a transition from a regime dominated by a gelled or clustered state to a regime dominated by free, crowded ions. This transition from gelation to crowding is conceptually similar to the overscreening to crowding transition.
△ Less
Submitted 3 July, 2022; v1 submitted 23 April, 2022;
originally announced April 2022.
-
Polar Liquids at Charged Interfaces: A Dipolar Shell Theory
Authors:
J. Pedro de Souza,
Alexei A. Kornyshev,
Martin Z. Bazant
Abstract:
The structure of polar liquids and electrolytic solutions, such as water and aqueous electrolytes, at interfaces underlies numerous phenomena in physics, chemistry, biology, and engineering. In this work, we develop a continuum theory that captures the essential features of dielectric screening by polar liquids at charged interfaces, including oscillations in charge and mass, starting from the mol…
▽ More
The structure of polar liquids and electrolytic solutions, such as water and aqueous electrolytes, at interfaces underlies numerous phenomena in physics, chemistry, biology, and engineering. In this work, we develop a continuum theory that captures the essential features of dielectric screening by polar liquids at charged interfaces, including oscillations in charge and mass, starting from the molecular properties of the solvent. The theory predicts an anisotropic dielectric tensor of interfacial polar liquids previously studied in molecular dynamics simulations. We explore the effect of the interfacial polar liquid properties on the capacitance of the electrode/electrolyte interface and on hydration forces between two plane-parallel polarized surfaces. In the linear response approximation, we obtain simple formulas for the characteristic decay lengths of molecular and ionic profiles at the interface.
△ Less
Submitted 14 April, 2022;
originally announced April 2022.
-
Dip-coating of bidisperse particulate suspensions
Authors:
Deok-Hoon Jeong,
Michael Ka Ho Lee,
Virgile Thiévenaz,
Martin Z. Bazant,
A. Sauret
Abstract:
Dip-coating consists in withdrawing a substrate from a bath to coat it with a thin liquid layer. This process is well-understood for homogeneous fluids, but heterogeneities such as particles dispersed in the liquid lead to more complex situations. Indeed, particles introduce a new length scale, their size, in addition to the thickness of the coating film. Recent studies have shown that at first or…
▽ More
Dip-coating consists in withdrawing a substrate from a bath to coat it with a thin liquid layer. This process is well-understood for homogeneous fluids, but heterogeneities such as particles dispersed in the liquid lead to more complex situations. Indeed, particles introduce a new length scale, their size, in addition to the thickness of the coating film. Recent studies have shown that at first order, the thickness of the coating film for monodisperse particles can be captured by an effective capillary number based on the viscosity of the suspension, providing that the film is thicker than the particle diameter. However, suspensions involved in most practical applications are polydisperse, characterized by a wide range of particle sizes, introducing additional length scales. In this study, we investigate the dip coating of suspensions having a bimodal size distribution of particles. We show that the effective viscosity approach is still valid in the regime where the coating film is thicker than the diameter of the largest particles, although bidisperse suspensions are less viscous than monodisperse suspensions of the same solid fraction. We also characterize the intermediate regime that consists of a heterogeneous coating layer and where the composition of the film is different from the composition of the bath. A model to predict the probability of entraining the particles in the liquid film depending on their sizes is proposed and captures our measurements. In this regime, corresponding to a specific range of withdrawal velocities, capillarity filters the large particles out of the film.
△ Less
Submitted 30 September, 2021;
originally announced October 2021.
-
Correlative image learning of chemo-mechanics in phase-transforming solids
Authors:
Haitao D. Deng,
Hongbo Zhao,
Norman L. **,
Lauren Hughes,
Benjamin Savitzky,
Colin Ophus,
Dimitrios Fraggedakis,
András Borbély,
Young-Sang Yu,
Eder Lomeli,
Rui Yan,
Jueyi Liu,
David A. Shapiro,
Wei Cai,
Martin Z. Bazant,
Andrew M. Minor,
William C. Chueh
Abstract:
Constitutive laws underlie most physical processes in nature. However, learning such equations in heterogeneous solids (e.g., due to phase separation) is challenging. One such relationship is between composition and eigenstrain, which governs the chemo-mechanical expansion in solids. In this work, we developed a generalizable, physically-constrained image-learning framework to algorithmically lear…
▽ More
Constitutive laws underlie most physical processes in nature. However, learning such equations in heterogeneous solids (e.g., due to phase separation) is challenging. One such relationship is between composition and eigenstrain, which governs the chemo-mechanical expansion in solids. In this work, we developed a generalizable, physically-constrained image-learning framework to algorithmically learn the chemo-mechanical constitutive law at the nanoscale from correlative four-dimensional scanning transmission electron microscopy and X-ray spectro-ptychography images. We demonstrated this approach on Li$_X$FePO$_4$, a technologically-relevant battery positive electrode material. We uncovered the functional form of composition-eigenstrain relation in this two-phase binary solid across the entire composition range (0 $\leq$ X $\leq$ 1), including inside the thermodynamically-unstable miscibility gap. The learned relation directly validates Vegard's law of linear response at the nanoscale. Our physics-constrained data-driven approach directly visualizes the residual strain field (by removing the compositional and coherency strain), which is otherwise impossible to quantify. Heterogeneities in the residual strain arise from misfit dislocations and were independently verified by X-ray diffraction line profile analysis. Our work provides the means to simultaneously quantify chemical expansion, coherency strain and dislocations in battery electrodes, which has implications on rate capabilities and lifetime. Broadly, this work also highlights the potential of integrating correlative microscopy and image learning for extracting material properties and physics.
△ Less
Submitted 13 July, 2021;
originally announced July 2021.
-
Blistering Failure of Elastic Coatings with Applications to Corrosion Resistance
Authors:
Surya Effendy,
Tingtao Zhou,
Henry Eichman,
Michael Petr,
Martin Z. Bazant
Abstract:
A variety of polymeric surfaces, such as anti-corrosion coatings and polymer-modified asphalts, are prone to blistering when exposed to moisture and air. As water and oxygen diffuse through the material, dissolved species are produced, which generate osmotic pressure that deforms and debonds the coating.These mechanisms are experimentally well-supported; however, comprehensive macroscopic models c…
▽ More
A variety of polymeric surfaces, such as anti-corrosion coatings and polymer-modified asphalts, are prone to blistering when exposed to moisture and air. As water and oxygen diffuse through the material, dissolved species are produced, which generate osmotic pressure that deforms and debonds the coating.These mechanisms are experimentally well-supported; however, comprehensive macroscopic models capable of predicting the formation osmotic blisters, without extensive data-fitting, is scant. Here, we develop a general mathematical theory of blistering and apply it to the failure of anti-corrosion coatings on carbon steel. The model is able to predict the irreversible, nonlinear blister growth dynamics, which eventually reaches a stable state, ruptures, or undergoes runaway delamination, depending on the mechanical and adhesion properties of the coating. For runaway delamination, the theory predicts a critical delamination length, beyond which unstable corrosion-driven growth occurs. The model is able to fit multiple sets of blister growth data with no fitting parameters. Corrosion experiments are also performed to observe undercoat rusting on carbon steel, which yielded trends comparable with model predictions. The theory is used to define three dimensionless numbers which can be used for engineering design of elastic coatings capable of resisting visible deformation, rupture, and delamination.
△ Less
Submitted 24 June, 2021;
originally announced June 2021.
-
Salt-in-Ionic-Liquid Electrolytes: Ion Network Formation and Negative Effective Charges of Alkali Metal Cations
Authors:
Michael McEldrew,
Zachary A. H. Goodwin,
Nicola Molinari,
Boris Kozinsky,
Alexei A. Kornyshev,
Martin Z. Bazant
Abstract:
Salt-in-ionic liquid electrolytes have attracted significant attention as potential electrolytes for next generation batteries largely due to their safety enhancements over typical organic electrolytes. However, recent experimental and computational studies have shown that under certain conditions alkali cations can migrate in electric fields as if they carried a net negative effective charge. In…
▽ More
Salt-in-ionic liquid electrolytes have attracted significant attention as potential electrolytes for next generation batteries largely due to their safety enhancements over typical organic electrolytes. However, recent experimental and computational studies have shown that under certain conditions alkali cations can migrate in electric fields as if they carried a net negative effective charge. In particular, alkali cations were observed to have negative transference numbers at small mole fractions of alkali metal salt that revert to the expected net positive transference numbers at large mole fractions. Simulations have provided some insights into these observations, where the formation of asymmetric ionic clusters, as well as a percolating ion network could largely explain the anomalous transport of alkali cations. However, a thermodynamic theory that captures such phenomena has not been developed, as ionic associations were typically treated via the formation of ion pairs. The theory presented herein, based on the classical polymer theories, describes thermoreversible associations between alkali cations and anions, where the formation of large, asymmetric ionic clusters and a percolating ionic network are a natural result of the theory. Furthermore, we present several general methods to calculate the effective charge of alkali cations in ionic liquids. We note that the negative effective charge is a robust prediction with respect to the parameters of the theory, and that the formation of a percolating ionic network leads to the restoration of net positive charges of the cations at large mole fractions of alkali metal salt. Overall, we find excellent qualitative agreement between our theory and molecular simulations in terms of ionic cluster statistics and the effective charges of the alkali cations.
△ Less
Submitted 8 October, 2021; v1 submitted 23 June, 2021;
originally announced June 2021.
-
Ion Clusters and Networks in "Water-in-Salt Electrolytes"
Authors:
Michael McEldrew,
Zachary A. H. Goodwin,
Sheng Bi,
Alexei A. Kornyshev,
Martin Z. Bazant
Abstract:
Water-in-salt electrolytes (WiSEs) are a class of super-concentrated electrolytes that have shown much promise in replacing organic electrolytes in lithium-ion batteries. At the extremely high salt concentrations of WiSEs, ionic association is more complicated than the simple ion pair description. In fact, large branched clusters can be present in WiSEs, and past a critical salt concentration, an…
▽ More
Water-in-salt electrolytes (WiSEs) are a class of super-concentrated electrolytes that have shown much promise in replacing organic electrolytes in lithium-ion batteries. At the extremely high salt concentrations of WiSEs, ionic association is more complicated than the simple ion pair description. In fact, large branched clusters can be present in WiSEs, and past a critical salt concentration, an infinite percolating ionic network can form spontaneously. In this work, we simplify our recently developed thermodynamic model of reversible ionic aggregation and gelation, tailoring it specifically for WiSEs. Our simplified theory only has a handful of parameters, all of which can be readily determined from simulations. Our model is able to quantitatively reproduce the populations of ionic clusters of different sizes as a function of salt concentration, the critical salt concentration for ionic gelation, and the fraction of ions incorporated into the ionic gel, as observed from molecular simulations of three different lithium-based WiSEs. The extent of ionic association and gelation greatly affects the effective ionic strength of solution, the coordination environment of active cations that is known to govern the chemistry of the solid-electrolyte interface, and the thermodynamic activity of all species in the electrolyte.
△ Less
Submitted 8 March, 2021;
originally announced March 2021.
-
Equivalent circuit model for electrosorption with redox active materials
Authors:
Fan He,
Martin Z. Bazant,
T. Alan Hatton
Abstract:
Electrosorption is a promising technique for brackish water deionization and waste water remediation. Faradaic materials with redox activity have recently been shown to enhance both the adsorption capacity and the selectivity of electrosorption processes. Development of the theory of electrosorption with redox active materials can provide a fundamental understanding of the electrosorption mechanis…
▽ More
Electrosorption is a promising technique for brackish water deionization and waste water remediation. Faradaic materials with redox activity have recently been shown to enhance both the adsorption capacity and the selectivity of electrosorption processes. Development of the theory of electrosorption with redox active materials can provide a fundamental understanding of the electrosorption mechanism and a means to extract material properties from small-scale experiments for process optimization and scale-up. Here, we present an intuitive, physics-based equivalent circuit model to describe the electrosorption performance of redox active materials, which is able to accurately fit experimental cyclic voltammetry measurements. The model can serve as an efficient and easy-to-implement tool to evaluate properties of redox active materials and help to distinguish between the transport-limited and reaction-limited regimes in electrosorption processes. And the extracted intrinsic material properties can be further incorporated into process models under lower supporting electrolyte concentrations for realistic electrosorption applications.
△ Less
Submitted 31 December, 2020;
originally announced January 2021.
-
Theory of Faradaically Modulated Redox Active Electrodes for Electrochemically Mediated Selective Adsorption Processes
Authors:
Fan He,
Martin Z. Bazant,
T. Alan Hatton
Abstract:
Electrochemically mediated selective adsorption is an emerging electrosorption technique that utilizes Faradaically enhanced redox active electrodes, which can adsorb ions not only electrostatically, but also electrochemically. The superb selectivity (>100) of this technique enables selective removal of toxic or high-value target ions under low energy consumption. Here, we develop a general theore…
▽ More
Electrochemically mediated selective adsorption is an emerging electrosorption technique that utilizes Faradaically enhanced redox active electrodes, which can adsorb ions not only electrostatically, but also electrochemically. The superb selectivity (>100) of this technique enables selective removal of toxic or high-value target ions under low energy consumption. Here, we develop a general theoretical framework to describe the competitive electrosorption phenomena involving multiple ions and surface-bound redox species. The model couples diffusion, convection and electromigration with competitive surface adsorption reaction kinetics, consistently derived from non-equilibrium thermodynamics. To optimize the selective removal of the target ions, design criteria were derived analytically from physically relevant dimensionless groups and time scales, where the propagation of the target anions concentration front is the limiting step. Detailed computational studies are reported for three case studies that cover a wide range of inlet concentration ratios between the competing ions. And in all three cases, target anions in the electrosorption cell forms a self-sharpening reaction-diffusion wave front. Based on the model, a three-step stop-flow operation scheme with a pure strip** solution of target anions is proposed that optimizes the ion adsorption performance and increases the purity of the regeneration stream to almost 100%, which is beneficial for downstream processing.
△ Less
Submitted 31 December, 2020;
originally announced January 2021.
-
Theory of shock electrodialysis I: Water dissociation and electrosmotic vortices
Authors:
Huanhuan Tian,
Mohammad A. Alkhadra,
Martin Z. Bazant
Abstract:
Shock electrodialysis (shock ED), an emerging electrokinetic process for water purification, leverages the new physics of deionization shock waves in porous media. In previous work, a simple leaky membrane model with surface conduction can explain the propagation of deionization shocks in a shock ED system, but it cannot quantitatively predict the deionization and conductance (which determines the…
▽ More
Shock electrodialysis (shock ED), an emerging electrokinetic process for water purification, leverages the new physics of deionization shock waves in porous media. In previous work, a simple leaky membrane model with surface conduction can explain the propagation of deionization shocks in a shock ED system, but it cannot quantitatively predict the deionization and conductance (which determines the energy consumption), and it cannot explain the selective removal of ions in experiments. This two-part series of work establishes a more comprehensive model for shock ED, which applies to multicomponent electrolytes and any electrical double layer thickness, captures the phenomena of electroosmosis, diffusioosmosis, and water dissociation, and incorporates more realistic boundary conditions. In this paper, we will present the model details and show that hydronium transport and electroosmotic vortices (at the inlet and outlet) play important roles in determining the deionization and conductance in shock ED. We also find that the results are quantitatively consistent with experimental data in the literature. Finally, the model is used to investigate design strategies for scale up and optimization.
△ Less
Submitted 9 December, 2020;
originally announced December 2020.
-
Capillary filtering of particles during dip coating
Authors:
Alban Sauret,
Adrien Gans,
Benedicte Colnet,
Guillaume Saingier,
Martin Z. Bazant,
Emilie Dressaire
Abstract:
An object withdrawn from a liquid bath is coated with a thin layer of liquid. Along with the liquid, impurities such as particles present in the bath can be transferred to the withdrawn substrate. Entrained particles locally modify the thickness of the film, hence altering the quality and properties of the coating. In this study, we show that it is possible to entrain the liquid alone and avoid co…
▽ More
An object withdrawn from a liquid bath is coated with a thin layer of liquid. Along with the liquid, impurities such as particles present in the bath can be transferred to the withdrawn substrate. Entrained particles locally modify the thickness of the film, hence altering the quality and properties of the coating. In this study, we show that it is possible to entrain the liquid alone and avoid contamination of the substrate, at sufficiently low withdrawal velocity in diluted suspensions. Using a model system consisting of a plate exiting a liquid bath, we observe that particles can remain trapped in the meniscus which exerts a resistive capillary force to the entrainment. We characterize different entrainment regimes as the withdrawal velocity increases: from a pure liquid film, to a liquid film containing clusters of particles, and eventually individual particles. This capillary filtration is an effective barrier against the contamination of substrates withdrawn from a polluted bath and finds application against biocontamination.
△ Less
Submitted 27 November, 2020;
originally announced November 2020.
-
Electrochemical Ion Insertion: From Atoms to Devices
Authors:
Aditya Sood,
Andrey D. Poletayev,
Daniel A. Cogswell,
Peter M. Csernica,
J. Tyler Mefford,
Dimitrios Fraggedakis,
Michael F. Toney,
Aaron M. Lindenberg,
Martin Z. Bazant,
William C. Chueh
Abstract:
Electrochemical ion insertion involves coupled ion-electron transfer reactions, transport of guest species, and redox of the host. The hosts are typically anisotropic solids with two-dimensional conduction planes, but can also be materials with one-dimensional or isotropic transport pathways. These insertion compounds have traditionally been studied in the context of energy storage, but also find…
▽ More
Electrochemical ion insertion involves coupled ion-electron transfer reactions, transport of guest species, and redox of the host. The hosts are typically anisotropic solids with two-dimensional conduction planes, but can also be materials with one-dimensional or isotropic transport pathways. These insertion compounds have traditionally been studied in the context of energy storage, but also find extensive applications in electrocatalysis, optoelectronics, and computing. Recent developments in operando, ultrafast, and high-resolution characterization methods, as well as accurate theoretical simulation methods, have led to a renaissance in the understanding of ion-insertion compounds. In this Review, we present a unified framework for understanding insertion compounds across time and length scales ranging from atomic to device levels. Using graphite, transition metal dichalcogenides, layered oxides, oxyhydroxides, and olivines as examples, we explore commonalities in these materials in terms of point defects, interfacial reactions, and phase transformations. We illustrate similarities in the operating principles of various ion-insertion devices ranging from batteries and electrocatalysts to electrochromics and thermal transistors, with the goal of unifying research across disciplinary boundaries.
△ Less
Submitted 25 November, 2020;
originally announced November 2020.
-
Deionization Shocks in Crossflow
Authors:
Sven Schlumpberger,
Raymond B. Smith,
Huanhuan Tian,
Ali Mani,
Martin Z. Bazant
Abstract:
Shock electrodialysis is a recently developed electrochemical water treatment method which shows promise for water deionization and ionic separations. Although simple models and scaling laws have been proposed, a predictive theory has not yet emerged to fit experimental data and enable system design. Here, we extend and analyze existing "leaky membrane" models for the canonical case of a steady sh…
▽ More
Shock electrodialysis is a recently developed electrochemical water treatment method which shows promise for water deionization and ionic separations. Although simple models and scaling laws have been proposed, a predictive theory has not yet emerged to fit experimental data and enable system design. Here, we extend and analyze existing "leaky membrane" models for the canonical case of a steady shock in cross flow, as in recent experimental prototypes. Two-dimensional numerical solutions are compared with analytical boundary-layer approximations and experimental data. The boundary-layer theory accurately reproduces the simulation results for desalination, and both models predict the data collapse of the desalination factor with dimensionless current, scaled to the incoming convective flux of cations. The numerical simulation also predicts the water recovery increase with current. Nevertheless, both approaches cannot quantitatively fit the transition from normal to over-limiting current, which suggests gaps in our understanding of extreme electrokinetic phenomena in porous media.
△ Less
Submitted 20 April, 2021; v1 submitted 4 November, 2020;
originally announced November 2020.
-
Electroneutrality breakdown in nanopore arrays
Authors:
J. Pedro de Souza,
Amir Levy,
Martin Z. Bazant
Abstract:
The electrostatic screening of charge in one-dimensional confinement leads to long-range breakdown in electroneutrality within a nanopore. Through a series of continuum simulations, we demonstrate the principles of electroneutrality breakdown for electrolytes in one dimensional confinement. We show how interacting pores in a membrane can counteract the phenomenon of electroneutrality breakdown, ev…
▽ More
The electrostatic screening of charge in one-dimensional confinement leads to long-range breakdown in electroneutrality within a nanopore. Through a series of continuum simulations, we demonstrate the principles of electroneutrality breakdown for electrolytes in one dimensional confinement. We show how interacting pores in a membrane can counteract the phenomenon of electroneutrality breakdown, eventually returning to electroneutrality. Emphasis is placed on applying simplifying formulas to reduce the multidimensional partial differential equations into a single ordinary differential equation for the electrostatic potential. Dielectric mismatch between the electrolyte and membrane, pore aspect ratio, and confinement dimensionality are studied independently, outlining the relevance of electroneutrality breakdown in nanoporous membranes for selective ion transport and separations.
△ Less
Submitted 29 October, 2021; v1 submitted 3 November, 2020;
originally announced November 2020.
-
Capillary Sorting of Particles by Dip Coating
Authors:
Brian M. Dincau,
Martin Z. Bazant,
Emilie Dressaire,
Alban Sauret
Abstract:
In this letter, we describe the capillary sorting of particles by size based on dip coating. A substrate withdrawn from a liquid bath entrains a coating whose thickness depends on the withdrawal speed and the liquid properties. If the coating material contains particles, they will only be entrained when the viscous force pulling them with the substrate overcomes the opposing capillary force at the…
▽ More
In this letter, we describe the capillary sorting of particles by size based on dip coating. A substrate withdrawn from a liquid bath entrains a coating whose thickness depends on the withdrawal speed and the liquid properties. If the coating material contains particles, they will only be entrained when the viscous force pulling them with the substrate overcomes the opposing capillary force at the deformable meniscus. This force threshold occurs at different liquid thicknesses for particles of different sizes. Here, we show that this difference can be used to separate small particles from a mixed suspension through capillary filtration. In a bidisperse suspension, we observe three distinct filtration regimes. At low capillary numbers, Ca, no particles are entrained in the liquid coating. At high Ca, all particle sizes are entrained. For a range of capillary numbers between these two extremes, only the smallest particles are entrained while the larger ones remain in the reservoir. We explain how this technique can be applied to polydisperse suspension. We also provide an estimate of the range of capillary number to separate particles of given sizes. The combination of this technique with the scalability and robustness of dip coating makes it a promising candidate for high-throughput separation or purification of industrial and biomedical suspensions.
△ Less
Submitted 2 November, 2020;
originally announced November 2020.
-
Image Inversion and Uncertainty Quantification for Constitutive Laws of Pattern Formation
Authors:
Hongbo Zhao,
Richard D. Braatz,
Martin Z. Bazant
Abstract:
The forward problems of pattern formation have been greatly empowered by extensive theoretical studies and simulations, however, the inverse problem is less well understood. It remains unclear how accurately one can use images of pattern formation to learn the functional forms of the nonlinear and nonlocal constitutive relations in the governing equation. We use PDE-constrained optimization to inf…
▽ More
The forward problems of pattern formation have been greatly empowered by extensive theoretical studies and simulations, however, the inverse problem is less well understood. It remains unclear how accurately one can use images of pattern formation to learn the functional forms of the nonlinear and nonlocal constitutive relations in the governing equation. We use PDE-constrained optimization to infer the governing dynamics and constitutive relations and use Bayesian inference and linearization to quantify their uncertainties in different systems, operating conditions, and imaging conditions. We discuss the conditions to reduce the uncertainty of the inferred functions and the correlation between them, such as state-dependent free energy and reaction kinetics (or diffusivity). We present the inversion algorithm and illustrate its robustness and uncertainties under limited spatiotemporal resolution, unknown boundary conditions, blurry initial conditions, and other non-ideal situations. Under certain situations, prior physical knowledge can be included to constrain the result. Phase-field, reaction-diffusion, and phase-field-crystal models are used as model systems. The approach developed here can find applications in inferring unknown physical properties of complex pattern-forming systems and in guiding their experimental design.
△ Less
Submitted 15 March, 2021; v1 submitted 20 October, 2020;
originally announced October 2020.
-
A Physics-Guided Neural Network Framework for Elastic Plates: Comparison of Governing Equations-Based and Energy-Based Approaches
Authors:
Wei Li,
Martin Z. Bazant,
Juner Zhu
Abstract:
One of the obstacles hindering the scaling-up of the initial successes of machine learning in practical engineering applications is the dependence of the accuracy on the size of the database that "drives" the algorithms. Incorporating the already-known physical laws into the training process can significantly reduce the size of the required database. In this study, we establish a neural network-ba…
▽ More
One of the obstacles hindering the scaling-up of the initial successes of machine learning in practical engineering applications is the dependence of the accuracy on the size of the database that "drives" the algorithms. Incorporating the already-known physical laws into the training process can significantly reduce the size of the required database. In this study, we establish a neural network-based computational framework to characterize the finite deformation of elastic plates, which in classic theories is described by the Föppl--von Kármán (FvK) equations with a set of boundary conditions (BCs). A neural network is constructed by taking the spatial coordinates as the input and the displacement field as the output to approximate the exact solution of the FvK equations. The physical information (PDEs, BCs, and potential energies) is then incorporated into the loss function, and a pseudo dataset is sampled without knowing the exact solution to finally train the neural network. The prediction accuracy of the modeling framework is carefully examined by applying it to four different loading cases: in-plane tension with non-uniformly distributed stretching forces, in-plane central-hole tension, out-of-plane deflection, and buckling under compression. \hl{Three ways of formulating the loss function are compared: 1) purely data-driven, 2) PDE-based, and 3) energy-based. Through the comparison with the finite element simulations, it is found that all the three approaches can characterize the elastic deformation of plates with a satisfactory accuracy if trained properly. Compared with incorporating the PDEs and BCs in the loss, using the total potential energy shows certain advantage in terms of the simplicity of hyperparameter tuning and the computational efficiency.
△ Less
Submitted 18 January, 2021; v1 submitted 12 October, 2020;
originally announced October 2020.
-
Correlated Ion Transport and the Gel Phase in Room Temperature Ionic Liquids
Authors:
Michael McEldrew,
Zachary A. H. Goodwin,
Hongbo Zhao,
Martin Z. Bazant,
Alexei A. Kornyshev
Abstract:
Here we present a theory of ion aggregation and gelation of room temperature ionic liquids (RTILs). Based on it, we investigate the effect of ion aggregation on correlated ion transport - ionic conductivity and transference numbers - obtaining closed-form expressions for these quantities.The theory depends on the maximum number of associations a cation and anion can form, and the strength of their…
▽ More
Here we present a theory of ion aggregation and gelation of room temperature ionic liquids (RTILs). Based on it, we investigate the effect of ion aggregation on correlated ion transport - ionic conductivity and transference numbers - obtaining closed-form expressions for these quantities.The theory depends on the maximum number of associations a cation and anion can form, and the strength of their association. To validate the presented theory, we perform molecular dynamics simulations on several RTILs, and a range of temperatures for one RTIL. The simulations indicate the formation of large clusters, even percolating through the system under certain circumstances, thus forming a gel, with the theory accurately describing the obtained cluster distributions in all cases. We discuss the possibility of observing a gel phase in neat RTILs, which has hitherto not been discussed in any detail.
△ Less
Submitted 8 October, 2020; v1 submitted 5 October, 2020;
originally announced October 2020.
-
Electro-osmotic Instability of Concentration Enrichment in Curved Geometries for an Aqueous Electrolyte
Authors:
Bingrui Xu,
Zhibo Gu,
Wei Liu,
Peng Huo,
Yueting Zhou,
S. M. Rubinstein,
M. Z. Bazant,
B. Zaltzman,
I. Rubinstein,
Daosheng Deng
Abstract:
We report that an electro-osmotic instability of concentration enrichment in curved geometries for an aqueous electrolyte, as opposed to the well-known one, is initiated exclusively at the enriched interface (anode), rather than at the depleted one (cathode). For this instability, the limitation of unrealistically high material Peclet number in planar geometry is eliminated by the strong electric…
▽ More
We report that an electro-osmotic instability of concentration enrichment in curved geometries for an aqueous electrolyte, as opposed to the well-known one, is initiated exclusively at the enriched interface (anode), rather than at the depleted one (cathode). For this instability, the limitation of unrealistically high material Peclet number in planar geometry is eliminated by the strong electric field arising from the line charge singularity. In a model setup of concentric circular electrodes, we show by stability analysis, numerical simulation, and experimental visualization that instability occurs at the inner anode, below a critical radius of curvature. The stability criterion is also formulated in terms of a critical electric field and extended to arbitrary (2d) geometries by conformal map**. This discovery suggests that transport may be enhanced in processes limited by salt enrichment, such as reverse osmosis, by triggering this instability with needle-like electrodes.
△ Less
Submitted 3 August, 2020;
originally announced August 2020.
-
Theory of coupled ion-electron transfer kinetics
Authors:
Dimitrios Fraggedakis,
Michael McEldrew,
Raymond B. Smith,
Yamini Krishnan,
Yirui Zhang,
Peng Bai,
William C. Chueh,
Yang Shao-Horn,
Martin Z. Bazant
Abstract:
The microscopic theory of chemical reactions is based on transition state theory, where atoms or ions transfer classically over an energy barrier, as electrons maintain their ground state. Electron transfer is fundamentally different and occurs by tunneling in response to solvent fluctuations. Here, we develop the theory of coupled ion-electron transfer, in which ions and solvent molecules fluctua…
▽ More
The microscopic theory of chemical reactions is based on transition state theory, where atoms or ions transfer classically over an energy barrier, as electrons maintain their ground state. Electron transfer is fundamentally different and occurs by tunneling in response to solvent fluctuations. Here, we develop the theory of coupled ion-electron transfer, in which ions and solvent molecules fluctuate cooperatively to facilitate electron transfer. We derive a general formula of the reaction rate that depends on the overpotential, solvent properties, the electronic structure of the electron donor/acceptor, and the excess chemical potential of ions in the transition state. For Faradaic reactions, the theory predicts curved Tafel plots with a concentration-dependent reaction-limited current. For moderate overpotentials, our formula reduces to the Butler-Volmer equation and explains its relevance, not only in the well-known limit of large electron-transfer (solvent reorganization) energy, but also in the opposite limit of large ion-transfer energy. The rate formula is applied to Li-ion batteries, where reduction of the electrode host material couples with ion insertion. In the case of lithium iron phosphate, the theory accurately predicts the concentration dependence of the exchange current measured by {\it in operando} X-Ray microscopy without any adjustable parameters. These results pave the way for interfacial engineering to enhance ion intercalation rates, not only for batteries, but also for ionic separations and neuromorphic computing.
△ Less
Submitted 7 November, 2020; v1 submitted 25 July, 2020;
originally announced July 2020.
-
Entrainment of particles during the withdrawal of a fiber from a dilute suspension
Authors:
B. M. Dincau,
E. Mai,
Q. Magdelaine,
J. A. Lee,
M. Z. Bazant,
A. Sauret
Abstract:
A fiber withdrawn from a bath of a dilute particulate suspension exhibits different coating regimes depending on the physical properties of the fluid, the withdrawal speed, the particle sizes, and the radius of the fiber. Our experiments indicate that only the liquid without particles is entrained for thin coating films. Beyond a threshold capillary number, the fiber is coated by a liquid film wit…
▽ More
A fiber withdrawn from a bath of a dilute particulate suspension exhibits different coating regimes depending on the physical properties of the fluid, the withdrawal speed, the particle sizes, and the radius of the fiber. Our experiments indicate that only the liquid without particles is entrained for thin coating films. Beyond a threshold capillary number, the fiber is coated by a liquid film with entrained particles. We systematically characterize the role of the capillary number, the particle size, and the fiber radius on the threshold speed for particle entrainment. We discuss the boundary between these two regimes and show that the thickness of the liquid film at the stagnation point controls the entrainment process. The radius of the fiber provides a new degree of control in capillary filtering, allowing greater control over the size of the particles entrained in the film.
△ Less
Submitted 27 June, 2020;
originally announced June 2020.
-
Analysis, Design, and Generalization of Electrochemical Impedance Spectroscopy (EIS) Inversion Algorithms
Authors:
Surya Effendy,
Juhyun Song,
Martin Z. Bazant
Abstract:
We introduce a framework for analyzing and designing EIS inversion algorithms. Our framework stems from the observation of four features common to well-defined EIS inversion algorithms, namely (1) the representation of unknown distributions, (2) the minimization of a metric of error to estimate parameters arising from the chosen representation, subject to constraints on (3) the complexity control…
▽ More
We introduce a framework for analyzing and designing EIS inversion algorithms. Our framework stems from the observation of four features common to well-defined EIS inversion algorithms, namely (1) the representation of unknown distributions, (2) the minimization of a metric of error to estimate parameters arising from the chosen representation, subject to constraints on (3) the complexity control parameters, and (4) a means for choosing optimal control parameter values. These features must be present to overcome the ill-posed nature of EIS inversion problems. We review three established EIS inversion algorithms to illustrate the pervasiveness of these features, and show the utility of the framework by resolving ambiguities concerning three more algorithms. Our framework is then used to design the generalized EIS inversion (gEISi) algorithm, which uses Gaussian basis function representation, modality control parameter, and cross-validation for choosing the optimal control parameter value. The gEISi algorithm is applicable to the generalized EIS inversion problem, which allows for a wider range of underlying models. We also considered the construction of credible intervals for distributions arising from the algorithm. The algorithm is able to accurately reproduce distributions which have been difficult to obtain using existing algorithms. It is provided gratis on the repository https://github.com/suryaeff/gEISi.git.
△ Less
Submitted 12 June, 2020;
originally announced June 2020.
-
Dielectric breakdown by electric-field induced phase separation
Authors:
Dimitrios Fraggedakis,
Mohammad Mirzadeh,
Tingtao Zhou,
Martin Z. Bazant
Abstract:
The control of the dielectric and conductive properties of device-level systems is important for increasing the efficiency of energy- and information-related technologies. In some cases, such as neuromorphic computing, it is desirable to increase the conductivity of an initially insulating medium by several orders of magnitude, resulting in effective dielectric breakdown. Here, we show that by tun…
▽ More
The control of the dielectric and conductive properties of device-level systems is important for increasing the efficiency of energy- and information-related technologies. In some cases, such as neuromorphic computing, it is desirable to increase the conductivity of an initially insulating medium by several orders of magnitude, resulting in effective dielectric breakdown. Here, we show that by tuning the value of the applied electric field in systems { with variable permittivity and electric conductivity}, e.g. ion intercalation materials, we can vary the device-level electrical conductivity by orders of magnitude. We attribute this behavior to the formation of filament-like conductive domains that percolate throughout the system, { which form only when the electric conductivity depends on the concentration}. We conclude by discussing the applicability of our results in neuromorphic computing devices and Li-ion batteries.
△ Less
Submitted 25 July, 2020; v1 submitted 23 May, 2020;
originally announced May 2020.
-
Interfacial layering in the electric double layer of ionic liquids
Authors:
J. Pedro de Souza,
Zachary A. H. Goodwin,
Michael McEldrew,
Alexei A. Kornyshev,
Martin Z. Bazant
Abstract:
Ions in ionic liquids and concentrated electrolytes reside in a crowded, strongly-interacting environment, leading to the formation of discrete layers of charges at interfaces. Here, we propose a continuum theory that captures the transition from overscreening-- alternating layers of excess charge at low surface potential, to overcrowding-- the formation of dense layers of charge of the same sign…
▽ More
Ions in ionic liquids and concentrated electrolytes reside in a crowded, strongly-interacting environment, leading to the formation of discrete layers of charges at interfaces. Here, we propose a continuum theory that captures the transition from overscreening-- alternating layers of excess charge at low surface potential, to overcrowding-- the formation of dense layers of charge of the same sign at high surface potential. The model outputs slowly-decaying oscillations in the charge density with a wavelength of single ion diameters, as shown by analysis of the gradient expansion. The gradient expansion suggests a new structure for partial differential equations describing the electrostatic potential at charged interfaces. We find quantitative agreement between the theory and molecular simulations in the differential capacitance and concentration profiles.
△ Less
Submitted 31 July, 2020; v1 submitted 8 May, 2020;
originally announced May 2020.
-
Growth morphology and symmetry selection of interfacial instabilities in anisotropic environments
Authors:
Qing Zhang,
Amin Amooie,
Martin Z. Bazant,
Irmgard Bischofberger
Abstract:
The displacement of a fluid by another less viscous one in a quasi-two dimensional geometry typically leads to complex fingering patterns. In an isotropic system, dense-branching growth arises, which is characterized by repeated tip-splitting of evolving fingers. When anisotropy is present in the interfacial dynamics, the growth morphology changes to dendritic growth characterized by regular struc…
▽ More
The displacement of a fluid by another less viscous one in a quasi-two dimensional geometry typically leads to complex fingering patterns. In an isotropic system, dense-branching growth arises, which is characterized by repeated tip-splitting of evolving fingers. When anisotropy is present in the interfacial dynamics, the growth morphology changes to dendritic growth characterized by regular structures. We introduce anisotropy by engraving a six-fold symmetric lattice of channels on a Hele-Shaw cell. We show that the morphology transition in miscible fluids depends not only on the previously reported degree of anisotropy set by the lattice topography, but also on the viscosity ratio between the two fluids. Remarkably, the viscosity ratio and the degree of anisotropy also govern the global features of the dendritic patterns, inducing a systematic change from six-fold towards twelve-fold symmetric dendrites. Varying either control parameter provides a new method to tune the symmetry of complex patterns, which may also have relevance for analogous phenomena of gradient-driven interfacial dynamics, such as directional solidification or electrodeposition.
△ Less
Submitted 16 January, 2021; v1 submitted 5 April, 2020;
originally announced April 2020.
-
Vortices of Electro-osmotic Flow in Heterogeneous Porous Media
Authors:
Mohammad Mirzadeh,
Tingtao Zhou,
Mohammad Amin Amooie,
Dimitrios Fraggedakis,
Todd R. Ferguson,
Martin Z. Bazant
Abstract:
Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential)…
▽ More
Traditional models of electrokinetic transport in porous media are based on homogenized material properties, which neglect any macroscopic effects of microscopic fluctuations. This perspective is taken not only for convenience, but also motivated by the expectation of irrotational electro-osmotic flow, proportional to the electric field, for uniformly charged surfaces (or constant zeta potential) in the limit of thin double layers. Here, we show that the inherent heterogeneity of porous media generally leads to macroscopic vortex patterns, which have important implications for convective transport and mixing. These vortical flows originate due to competition between pressure-driven and electro-osmotic flows, and their size are characterized by the correlation length of heterogeneity in permeability or surface charge. The appearance of vortices is controlled by a single dimensionless control parameter, defined as the ratio of a typical electro-osmotic velocity to the total mean velocity.
△ Less
Submitted 12 March, 2020;
originally announced March 2020.
-
Tuning the stability of Electrochemical Interfaces by Electron Transfer reactions
Authors:
Dimitrios Fraggedakis,
Martin Z. Bazant
Abstract:
The morphology of interfaces is known to play fundamental role on the efficiency of energy-related applications, such light harvesting or ion intercalation. Altering the morphology on demand, however, is a very difficult task. Here, we show ways the morphology of interfaces can be tuned by driven electron transfer reactions. By using non-equilibrium thermodynamic stability theory, we uncover the o…
▽ More
The morphology of interfaces is known to play fundamental role on the efficiency of energy-related applications, such light harvesting or ion intercalation. Altering the morphology on demand, however, is a very difficult task. Here, we show ways the morphology of interfaces can be tuned by driven electron transfer reactions. By using non-equilibrium thermodynamic stability theory, we uncover the operating conditions that alter the interfacial morphology. We apply the theory to ion intercalation and surface growth where electrochemical reactions are described using Butler-Volmer or coupled ion-electron transfer kinetics. The latter connects microscopic/quantum mechanical concepts with the morphology of electrochemical interfaces. Finally, we construct non-equilibrium phase diagrams in terms of the applied driving force (current/voltage) and discuss the importance of engineering the density of states of the electron donor in applications related to energy harvesting and storage, electrocatalysis and photocatalysis.
△ Less
Submitted 28 April, 2020; v1 submitted 6 March, 2020;
originally announced March 2020.
-
Theory of Ion Aggregation and Gelation in Super-Concentrated Electrolytes
Authors:
Michael McEldrew,
Zachary A. H. Goodwin,
Sheng Bi,
Martin Z. Bazant,
Alexei A. Kornyshev
Abstract:
In concentrated electrolytes with asymmetric or irregular ions, such as ionic liquids and solvent-in-salt electrolytes, ion association is more complicated than simple ion-pairing. Large branched aggregates can form at significant concentrations at even moderate salt concentrations. When the extent of ion association reaches a certain threshold, a percolating ionic gel networks can form spontaneou…
▽ More
In concentrated electrolytes with asymmetric or irregular ions, such as ionic liquids and solvent-in-salt electrolytes, ion association is more complicated than simple ion-pairing. Large branched aggregates can form at significant concentrations at even moderate salt concentrations. When the extent of ion association reaches a certain threshold, a percolating ionic gel networks can form spontaneously. Gelation is a phenomenon that is well known in polymer physics, but it is practically unstudied in concentrated electrolytes. However, despite this fact, the ion-pairing description is often applied to these systems for the sake of simplicity. In this work, drawing strongly from established theories in polymer physics, we develop a simple thermodynamic model of reversible ionic aggregation and gelation in concentrated electrolytes accounting for the competition between ion solvation and ion association. Our model predicts the populations of ionic clusters of different sizes as a function of salt concentration, it captures the onset of ionic gelation and also the post-gel partitioning of ions into the gel. We discuss the applicability of our model, as well as the implications of its predictions on thermodynamic, transport, and rheological properties.
△ Less
Submitted 26 February, 2020;
originally announced February 2020.
-
Theory of water desalination with intercalation materials
Authors:
K. Singh,
H. J. M. Bouwmeester,
L. C. P. M de Smet,
M. Z. Bazant,
P. M. Biesheuvel
Abstract:
We present porous electrode theory for capacitive deionization (CDI) with electrodes containing nanoparticles that consist of a redox-active intercalation material. A geometry of a desalination cell is considered which consists of two porous electrodes, two flow channels and an anion-exchange membrane, and we use Nernst-Planck theory to describe ion transport in the aqueous phase in all these laye…
▽ More
We present porous electrode theory for capacitive deionization (CDI) with electrodes containing nanoparticles that consist of a redox-active intercalation material. A geometry of a desalination cell is considered which consists of two porous electrodes, two flow channels and an anion-exchange membrane, and we use Nernst-Planck theory to describe ion transport in the aqueous phase in all these layers. A single-salt solution is considered, with unequal diffusion coefficients for anions and cations. Similar to previous models for CDI and electrodialysis, we solve the dynamic two-dimensional equations by assuming that flow of water, and thus the advection of ions, is zero in the electrode, and in the flow channel only occurs in the direction along the electrode and membrane. In all layers, diffusion and migration are only considered in the direction perpendicular to the flow of water. Electronic as well as ionic transport limitations within the nanoparticles are neglected, and instead the Frumkin isotherm (or regular solution model) is used to describe local chemical equilibrium of cations between the nanoparticles and the adjacent electrolyte, as a function of the electrode potential. Our model describes the dynamics of key parameters of the CDI process with intercalation electrodes, such as effluent salt concentration, the distribution of intercalated ions, cell voltage, and energy consumption.
△ Less
Submitted 21 December, 2019;
originally announced December 2019.
-
Physics of Electrostatic Projection Revealed by High-Speed Video Imaging
Authors:
Arash Sayyah,
Mohammad Mirzadeh,
Yi Jiang,
Warren V. Gleason,
William C. Rice,
Martin Z. Bazant
Abstract:
Processes based on electrostatic projection are used extensively in industry, e.g. for mineral separations, electrophotography or manufacturing of coated abrasives, such as sandpaper. Despite decades of engineering practice, there are still unanswered questions. In this paper, we present a comprehensive experimental study of projection process of more than 1500 individual spherical alumina particl…
▽ More
Processes based on electrostatic projection are used extensively in industry, e.g. for mineral separations, electrophotography or manufacturing of coated abrasives, such as sandpaper. Despite decades of engineering practice, there are still unanswered questions. In this paper, we present a comprehensive experimental study of projection process of more than 1500 individual spherical alumina particles with a nominal size of 500 $μ$m, captured by high-speed video imaging and digital image analysis. Based on flight trajectories of approximately 1100 projected particles, we determined the acquired charge and dynamics as a function of relative humidity (RH) and electric field intensity and compared the results with classical theories. For RH levels of 50\% and above, more than 85\% of disposed particles were projected, even when the electric field intensity was at its minimum level. This suggests that, beyond a critical value of electric field intensity, relative humidity plays a more critical role in the projection process. We also observed that the charging time is reduced dramatically for RH levels of 50\% and above, possibly due to the build-up of thin water films around the particles which can facilitate charge transfer. In contrast, projected particles at 30\% RH level exhibited an excessive amount of electric charge, between two to four times than that of saturation value, which might be attributed to triboelectric charging effects. Finally, the physics of electrostatic projection is compared and contrasted with those of induced-charge electrokinetic phenomena, which share similar field-square scaling, as the applied field acts on its own induced charge to cause particle motion.
△ Less
Submitted 9 November, 2019;
originally announced November 2019.
-
Theory of Freezing Point Depression in Charged Porous Media
Authors:
Tingtao Zhou,
Mohammad Mirzadeh,
Dimitrios Fraggedakis,
Roland J. -M. Pellenq,
Martin Z. Bazant
Abstract:
Freezing in charged porous media can induce significant pressure and cause damage to tissues and functional materials. We formulate a thermodynamically consistent theory to model freezing phenomena inside charged heterogeneous porous space. Two regimes are distinguished: free ions in open pore space lead to negligible effects of freezing point depression and pressure. On the other hand, if nano-fl…
▽ More
Freezing in charged porous media can induce significant pressure and cause damage to tissues and functional materials. We formulate a thermodynamically consistent theory to model freezing phenomena inside charged heterogeneous porous space. Two regimes are distinguished: free ions in open pore space lead to negligible effects of freezing point depression and pressure. On the other hand, if nano-fluidic salt trap** happens, subsequent ice formation is suppressed due to the high concentration of ions in the electrolyte. In this case, our theory predicts that freezing starts at a significantly lower temperature compared to pure water. In 1D, as the temperature goes even lower, ice continuously grows, until the salt concentration reaches saturation, all ions precipitate to form salt crystals, and freezing completes. Enormous pressure can be generated if initial salt concentration is high before salt entrapment. We show modifications to the classical nucleation theory, due to the trapped salt ions. Interestingly, although the freezing process is enormously changed by trapped salts, our analysis shows that the Gibbs-Thompson equation on confined melting point shift is not affected by the presence of the electrolyte.
△ Less
Submitted 20 September, 2019;
originally announced September 2019.
-
The Heat of Nervous Conduction: A Thermodynamic Framework
Authors:
Aymar C. L. de Lichtervelde,
J. Pedro de Souza,
Martin Z. Bazant
Abstract:
Early recordings of nervous conduction revealed a notable thermal signature associated with the electrical signal. The observed production and subsequent absorption of heat arise from physicochemical processes that occur at the cell membrane level during the conduction of the action potential. In particular, the reversible release of electrical energy stored as a difference of potential across the…
▽ More
Early recordings of nervous conduction revealed a notable thermal signature associated with the electrical signal. The observed production and subsequent absorption of heat arise from physicochemical processes that occur at the cell membrane level during the conduction of the action potential. In particular, the reversible release of electrical energy stored as a difference of potential across the cell membrane appears as a simple yet consistent explanation for the heat production, as proposed in the "Condenser Theory." However, the Condenser Theory has not been analyzed beyond the analogy between the cell membrane and a parallel-plate capacitor, i.e. a condenser, which cannot account for the magnitude of the heat signature. In this work, we use a detailed electrostatic model of the cell membrane to revisit the Condenser Theory. We derive expressions for free energy and entropy changes associated with the depolarization of the membrane by the action potential, which give a direct measure of the heat produced and absorbed by neurons. We show how the density of surface charges on both sides of the membrane impacts the energy changes. Finally, considering a typical action potential, we show that if the membrane holds a bias of surface charges, such that the internal side of the membrane is 0.05 C m$^{-2}$ more negative than the external side, the size of the heat predicted by the model reaches the range of experimental values. Based on our study, we identify the change in electrical energy of the membrane as the primary mechanism of heat production and absorption by neurons during nervous conduction.
△ Less
Submitted 8 August, 2019;
originally announced August 2019.
-
Ionic activity in concentrated electrolytes: solvent structure effect revisited
Authors:
Amir Levy,
Martin Z. Bazant,
Alexei A. Kornyshev
Abstract:
We revisit the role of the local solvent structure on the activity coefficient of electrolytes with a general non-local dielectric function approach. We treat the concentrated electrolyte as a dielectric medium and suggest an interpolated formula for the dielectric response. The pure water limit is calibrated based on MD simulations and experimental data. Solving our model around a central ion, we…
▽ More
We revisit the role of the local solvent structure on the activity coefficient of electrolytes with a general non-local dielectric function approach. We treat the concentrated electrolyte as a dielectric medium and suggest an interpolated formula for the dielectric response. The pure water limit is calibrated based on MD simulations and experimental data. Solving our model around a central ion, we find strong over-screening and oscillations in the potential, which are absent in the standard "primitive model" predictions. We obtain mathematically tractable closed-form expressions for the activity coefficients and show reasonable agreement with experimental data.
△ Less
Submitted 28 May, 2019;
originally announced May 2019.
-
Multiscale Poromechanics of Wet Cement Paste
Authors:
Tingtao Zhou,
Katerina Ioannidou,
Franz-Josef Ulm,
Martin Z. Bazant,
Roland J. M. Pellenq
Abstract:
Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity variations over the lifetime of infrastructure. First, the liquid density distribution at intermediate to high relative humidities is obtained using a lattice g…
▽ More
Capillary effects such as imbibition-drying cycles impact the mechanics of granular systems over time. A multiscale poromechanics framework was applied to cement paste, that is the most common building material, experiencing broad humidity variations over the lifetime of infrastructure. First, the liquid density distribution at intermediate to high relative humidities is obtained using a lattice gas density functional method together with a realistic nano-granular model of cement hydrates. The calculated adsorption/desorption isotherms and pore size distributions are discussed and compare well to nitrogen and water experiments. The standard method for pore size distribution determination from desorption data is evaluated. Then, the integration of the Korteweg liquid stress field around each cement hydrate particle provided the capillary forces at the nanoscale. The cement mesoscale structure was relaxed under the action of the capillary forces. Local irreversible deformations of the cement nano-grains assembly were identified due to liquid-solid interactions. The spatial correlations of the nonaffine displacements extend to a few tens of nm. Finally, the Love-Weber method provided the homogenized liquid stress at the micronscale. The homogenization length coincided with the spatial correlation length nonaffine displacements. Our results on the solid response to capillary stress field suggest that the micronscale texture is not affected by mild drying, while local irreversible deformations still occur. These results pave the way towards understanding capillary phenomena induced stresses in heterogeneous porous media ranging from construction materials, hydrogels to living systems.
△ Less
Submitted 21 May, 2019;
originally announced May 2019.
-
Electrochemical impedance of electrodiffusion in charged medium under $dc$ bias
Authors:
Juhyun Song,
Edwin Khoo,
Martin Z. Bazant
Abstract:
An immobile charged species provides a charged medium for transport of charge carriers that is exploited in many applications, such as permselective membranes, doped semiconductors, biological ion channels, as well as porous media and microchannels with surface charges. In this paper, we theoretically study the electrochemical impedance of electrodiffusion in a charged medium by employing the Nern…
▽ More
An immobile charged species provides a charged medium for transport of charge carriers that is exploited in many applications, such as permselective membranes, doped semiconductors, biological ion channels, as well as porous media and microchannels with surface charges. In this paper, we theoretically study the electrochemical impedance of electrodiffusion in a charged medium by employing the Nernst-Planck equation and the electroneutrality condition with a background charge density. The impedance response is obtained under different dc bias conditions, extending above the diffusion-limiting bias. We find a transition in the impedance behavior around the diffusion-limiting bias, and present an analytical approximation for a weakly charged medium under an overlimiting bias.
△ Less
Submitted 15 July, 2019; v1 submitted 14 May, 2019;
originally announced May 2019.
-
Freezing point depression and freeze-thaw damage by nano-fuidic salt trap**
Authors:
Tingtao Zhou,
Mohammad Mirzadeh,
Roland J. -M. Pellenq,
Martin Z. Bazant
Abstract:
A remarkable variety of organisms and wet materials are able to endure temperatures far below the freezing point of bulk water. Cryo-tolerance in biology is usually attributed to "anti-freeze" proteins, and yet massive supercooling ($< -40^\circ$C) is also possible in porous media containing only simple aqueous electrolytes. For concrete pavements, the common wisdom is that freeze-thaw damage resu…
▽ More
A remarkable variety of organisms and wet materials are able to endure temperatures far below the freezing point of bulk water. Cryo-tolerance in biology is usually attributed to "anti-freeze" proteins, and yet massive supercooling ($< -40^\circ$C) is also possible in porous media containing only simple aqueous electrolytes. For concrete pavements, the common wisdom is that freeze-thaw damage results from the expansion of water upon freezing, but this cannot explain the large pressures ($> 10$~MPa) required to damage concrete, the observed correlation between pavement damage and de-icing salts, or the damage of cement paste loaded with benzene (which contracts upon freezing). In this Letter, we propose a different mechanism -- nanofluidic salt trap** -- which can explain the observations, using simple mathematical models of dissolved ions confined to thin liquid films between growing ice and charged surfaces. Although trapped salt lowers the freezing point, ice nucleation in charged pores causes enormous disjoining pressures via the rejected ions, until their removal by precipitation or surface adsorption at a lower temperatures releases the pressure and allows complete freezing. The theory is able to predict the non-monotonic salt-concentration dependence of freeze-thaw damage in concreter and provides a general framework to understand the origins of cryo-tolerance.
△ Less
Submitted 7 December, 2019; v1 submitted 16 May, 2019;
originally announced May 2019.