-
Neutral silicon vacancy centers in undoped diamond via surface control
Authors:
Zi-Huai Zhang,
Josh A. Zuber,
Lila V. H. Rodgers,
Xin Gui,
Paul Stevenson,
Minghao Li,
Marietta Batzer,
Marcel. li Grimau,
Brendan Shields,
Andrew M. Edmonds,
Nicola Palmer,
Matthew L. Markham,
Robert J. Cava,
Patrick Maletinsky,
Nathalie P. de Leon
Abstract:
Neutral silicon vacancy centers (SiV0) in diamond are promising candidates for quantum networks because of their long spin coherence times and stable, narrow optical transitions. However, stabilizing SiV0 requires high purity, boron doped diamond, which is not a readily available material. Here, we demonstrate an alternative approach via chemical control of the diamond surface. We use low-damage c…
▽ More
Neutral silicon vacancy centers (SiV0) in diamond are promising candidates for quantum networks because of their long spin coherence times and stable, narrow optical transitions. However, stabilizing SiV0 requires high purity, boron doped diamond, which is not a readily available material. Here, we demonstrate an alternative approach via chemical control of the diamond surface. We use low-damage chemical processing and annealing in a hydrogen environment to realize reversible and highly stable charge state tuning in undoped diamond. The resulting SiV0 centers display optically detected magnetic resonance and bulk-like optical properties. Controlling the charge state tuning via surface termination offers a route for scalable technologies based on SiV0 centers, as well as charge state engineering of other defects.
△ Less
Submitted 27 June, 2022;
originally announced June 2022.
-
Nitrogen overgrowth as a catalytic mechanism during diamond chemical vapour deposition
Authors:
Lachlan M. Oberg,
Marietta Batzer,
Alastair Stacey,
Marcus W. Doherty
Abstract:
Nitrogen is frequently included in chemical vapour deposition feed gases to accelerate diamond growth. While there is no consensus for an atomistic mechanism of this effect, existing studies have largely focused on the role of sub-surface nitrogen and nitrogen-based adsorbates. In this work, we demonstrate the catalytic effect of surface-embedded nitrogen in nucleating new layers of (100) diamond.…
▽ More
Nitrogen is frequently included in chemical vapour deposition feed gases to accelerate diamond growth. While there is no consensus for an atomistic mechanism of this effect, existing studies have largely focused on the role of sub-surface nitrogen and nitrogen-based adsorbates. In this work, we demonstrate the catalytic effect of surface-embedded nitrogen in nucleating new layers of (100) diamond. To do so we develop a model of nitrogen overgrowth using density functional theory. Nucleation of new layers occurs through C insertion into a C--C surface dimer. However, we find that C insertion into a C--N dimer has substantially reduced energy requirements. In particular, the rate of the key dimer ring-opening and closing mechanism is increased 400-fold in the presence of nitrogen. Full incorporation of the substitutional nitrogen defect is then facilitated through charge transfer of an electron from the nitrogen lone pair to charge acceptors on the surface. This work provides a compelling mechanism for the role of surface-embedded nitrogen in enhancing (100) diamond growth through the nucleation of new layers. Furthermore, it demonstrates a pathway for substitutional nitrogen formation during chemical vapour deposition which can be extended to study the creation of technologically relevant nitrogen-based defects.
△ Less
Submitted 10 November, 2020;
originally announced November 2020.
-
Parabolic diamond scanning probes for single spin magnetic field imaging
Authors:
N. Hedrich,
D. Rohner,
M. Batzer,
P. Maletinsky,
B. J. Shields
Abstract:
Enhancing the measurement signal from solid state quantum sensors such as the nitrogen-vacancy (NV) center in diamond is an important problem for sensing and imaging of condensed matter systems. Here we engineer diamond scanning probes with a truncated parabolic profile that optimizes the photonic signal from single embedded NV centers, forming a high-sensitivity probe for nanoscale magnetic field…
▽ More
Enhancing the measurement signal from solid state quantum sensors such as the nitrogen-vacancy (NV) center in diamond is an important problem for sensing and imaging of condensed matter systems. Here we engineer diamond scanning probes with a truncated parabolic profile that optimizes the photonic signal from single embedded NV centers, forming a high-sensitivity probe for nanoscale magnetic field imaging. We develop a scalable fabrication procedure based on dry etching with a flowable oxide mask to reliably produce a controlled tip curvature. The resulting parabolic tip shape yields a median saturation count rate of 2.1 $\pm$ 0.2 MHz, the highest reported for single NVs in scanning probes to date. Furthermore, the structures operate across the full NV photoluminescence spectrum, emitting into a numerical aperture of 0.46 and the end-facet of the truncated tip, located near the focus of the parabola, allows for small NV-sample spacings and nanoscale imaging. We demonstrate the excellent properties of these diamond scanning probes by imaging ferromagnetic stripes with a spatial resolution better than 50 nm. Our results mark a 5-fold improvement in measurement signal over the state-of-the art in scanning-probe based NV sensors.
△ Less
Submitted 3 March, 2020;
originally announced March 2020.
-
Single crystal diamond pyramids for applications in nanoscale quantum sensing
Authors:
Marietta Batzer,
Brendan Shields,
Elke Neu,
Claudia Widmann,
Christian Giese,
Christoph Nebel,
Patrick Maletinsky
Abstract:
We present a new approach combining top down fabrication and bottom up overgrowth to create diamond photonic nanostructures in form of single-crystalline diamond nanopyramids. Our approach relies on diamond nanopillars, that are overgrown with single-crystalline diamond to form pyramidal structures oriented along crystal facets. To characterize the photonic properties of the pyramids, color center…
▽ More
We present a new approach combining top down fabrication and bottom up overgrowth to create diamond photonic nanostructures in form of single-crystalline diamond nanopyramids. Our approach relies on diamond nanopillars, that are overgrown with single-crystalline diamond to form pyramidal structures oriented along crystal facets. To characterize the photonic properties of the pyramids, color centers are created in a controlled way using ion implantation and annealing. We find very high collection efficiency from color centers close to the pyramid apex. We further show excellent smoothness and sharpness of our diamond pyramids with measured tip radii on the order of 10 nm. Our results offer interesting prospects for nanoscale quantum sensing using diamond color centers, where our diamond pyramids could be used as scanning probes for nanoscale imaging. There, our approach would offer signifikant advantages compared to the cone-shaped scanning probes which define the current state of the art.
△ Less
Submitted 23 October, 2019;
originally announced October 2019.
-
Fabrication of all diamond scanning probes for nanoscale magnetometry
Authors:
Patrick Appel,
Elke Neu,
Marc Ganzhorn,
Arne Barfuss,
Marietta Batzer,
Micha Gratz,
Andreas Tschöpe,
Patrick Maletinsky
Abstract:
The electronic spin of the nitrogen vacancy (NV) center in diamond forms an atomically sized, highly sensitive sensor for magnetic fields. To harness the full potential of individual NV centers for sensing with high sensitivity and nanoscale spatial resolution, NV centers have to be incorporated into scanning probe structures enabling controlled scanning in close proximity to the sample surface. H…
▽ More
The electronic spin of the nitrogen vacancy (NV) center in diamond forms an atomically sized, highly sensitive sensor for magnetic fields. To harness the full potential of individual NV centers for sensing with high sensitivity and nanoscale spatial resolution, NV centers have to be incorporated into scanning probe structures enabling controlled scanning in close proximity to the sample surface. Here, we present an optimized procedure to fabricate single-crystal, all-diamond scanning probes starting from commercially available diamond and show a highly efficient and robust approach for integrating these devices in a generic atomic force microscope. Our scanning probes consisting of a scanning nanopillar (200 nm diameter, $1-2\,μ$m length) on a thin ($< 1μ$m) cantilever structure, enable efficient light extraction from diamond in combination with a high magnetic field sensitivity ($\mathrm{η_{AC}}\approx50\pm20\,\mathrm{nT}/\sqrt{\mathrm{Hz}}$). As a first application of our scanning probes, we image the magnetic stray field of a single Ni nanorod. We show that this stray field can be approximated by a single dipole and estimate the NV-to-sample distance to a few tens of nanometer, which sets the achievable resolution of our scanning probes.
△ Less
Submitted 31 March, 2016;
originally announced April 2016.