Showing 1–15 of 15 results for author: Barton, T

A cell-centred Eulerian volume-of-fluid method for compressible multi-material flows

Authors: Timothy R. Law, Philip T. Barton

Abstract: We present a practical cell-centred volume-of-fluid method developed within a pure Eulerian setting for the simulation of compressible solid-fluid problems. The method builds on a previously published diffuse-interface Godunov-type scheme through the addition of a specialised mixed-cell update that is capable of maintaining sharp interfaces indefinitely. The mixed-cell update is local and may be v… ▽ More We present a practical cell-centred volume-of-fluid method developed within a pure Eulerian setting for the simulation of compressible solid-fluid problems. The method builds on a previously published diffuse-interface Godunov-type scheme through the addition of a specialised mixed-cell update that is capable of maintaining sharp interfaces indefinitely. The mixed-cell update is local and may be viewed as an interface-sharpening extension to the underlying diffuse-interface scheme along the lines of other techniques such as Tangent of Hyperbola INterface Capturing (THINC), and hence the method can be straightforwardly extended to include other coupled physics. We validate the method on a range of challenging test problems including a collapsing metal shell, cylinder impacts and the three-dimensional simulation of a buried explosive charge. Finally we demonstrate the robustness of the method, and its use in a multi-physics context, by modelling the BRL 105mm unconfined shaped charge with reactive high-explosive burn and rate-sensitive plasticity. △ Less

Submitted 24 April, 2023; originally announced April 2023.

Comments: 34 pages, 15 figures, submitted to Journal of Computational Physics

Statistical learning with phylogenetic network invariants

Authors: Travis Barton, Elizabeth Gross, Colby Long, Joseph Rusinko

Abstract: Phylogenetic networks provide a means of describing the evolutionary history of sets of species believed to have undergone hybridization or gene flow during their evolution. The mutation process for a set of such species can be modeled as a Markov process on a phylogenetic network. Previous work has shown that a site-pattern probability distributions from a Jukes-Cantor phylogenetic network model… ▽ More Phylogenetic networks provide a means of describing the evolutionary history of sets of species believed to have undergone hybridization or gene flow during their evolution. The mutation process for a set of such species can be modeled as a Markov process on a phylogenetic network. Previous work has shown that a site-pattern probability distributions from a Jukes-Cantor phylogenetic network model must satisfy certain algebraic invariants. As a corollary, aspects of the phylogenetic network are theoretically identifiable from site-pattern frequencies. In practice, because of the probabilistic nature of sequence evolution, the phylogenetic network invariants will rarely be satisfied, even for data generated under the model. Thus, using network invariants for inferring phylogenetic networks requires some means of interpreting the residuals, or deviations from zero, when observed site-pattern frequencies are substituted into the invariants. In this work, we propose a method of utilizing invariant residuals and support vector machines to infer 4-leaf level-one phylogenetic networks, from which larger networks can be reconstructed. Given data for a set of species, the support vector machine is first trained on model data to learn the patterns of residuals corresponding to different network structures to classify the network that produced the data. We demonstrate the performance of our method on simulated data from the specified model and primate data. △ Less

Submitted 21 November, 2022; originally announced November 2022.

Comments: 27 pages, 8 figures

MSC Class: 62R01

A multi-physics method for fracture and fragmentation at high strain-rates

Authors: Tim Wallis, Philip T. Barton, Nikolaos Nikiforakis

Abstract: This work outlines a diffuse interface method for the study of fracture and fragmentation in ductile metals at high strain-rates in Eulerian finite volume simulations. The work is based on an existing diffuse interface method capable of simulating a broad range of different multi-physics applications, including multi-material interaction, damage and void opening. The work at hand extends this meth… ▽ More This work outlines a diffuse interface method for the study of fracture and fragmentation in ductile metals at high strain-rates in Eulerian finite volume simulations. The work is based on an existing diffuse interface method capable of simulating a broad range of different multi-physics applications, including multi-material interaction, damage and void opening. The work at hand extends this method with a technique to model realistic material inhomogeneities, and examines the performance of the method on a selection of challenging problems. Material inhomogeneities are included by evolving a scalar field that perturbs a material's plastic yield stress. This perturbation results in non-uniform fragments with a measurable statistical distribution, allowing for underlying defects in a material to be modelled. As the underlying numerical scheme is three dimensional, parallelisable and multi-physics-capable, the scheme can be tested on a range of strenuous problems. These problems especially include a three-dimensional explosively driven fracture study, with an explicitly resolved condensed phase explosive. The new scheme compares well with both experiment and previous numerical studies. △ Less

Submitted 8 October, 2022; originally announced October 2022.

A Flux-enriched Godunov Method for Multi-material Problems with Interface Slide and Void Opening

Authors: Tim Wallis, Philip T. Barton, Nikolaos Nikiforakis

Abstract: This work outlines a new three-dimensional diffuse interface finite volume method for the simulation of multiple solid and fluid components featuring large deformations, sliding and void opening. This is achieved by extending an existing reduced-equation diffuse interface method by means of a number of novel flux-modifiers and interface seeding routines that enable the application of different mat… ▽ More This work outlines a new three-dimensional diffuse interface finite volume method for the simulation of multiple solid and fluid components featuring large deformations, sliding and void opening. This is achieved by extending an existing reduced-equation diffuse interface method by means of a number of novel flux-modifiers and interface seeding routines that enable the application of different material boundary conditions. The method allows for slip boundary conditions across solid interfaces, material-void interaction, and interface separation. The method is designed to be straightforward to implement, inexpensive and highly parallelisable. This makes it suitable for use in large, multi-dimensional simulations that feature many complex materials and physical processes interacting over multiple levels of adaptive mesh refinement. Furthermore, the new method allows for the generation of new interfaces in a conservative fashion and therefore naturally facilitates the simulation of high-strain rate fracture. Hence, the governing model is augmented to include ductile damage to allow for validation of the method against demanding physical experiments. The method is shown to give excellent agreement with both experiment and existing Eulerian interface tracking algorithms that employ sharp interface methods. △ Less

Submitted 10 June, 2021; v1 submitted 9 November, 2020; originally announced November 2020.

Comments: arXiv admin note: text overlap with arXiv:2009.14555

Journal ref: Journal of Computational Physics (2021) 110499

A Diffuse Interface Model of Reactive-fluids and Solid-dynamics

Authors: Tim Wallis, Philip T. Barton, Nikolaos Nikiforakis

Abstract: This article presents a multi-physics methodology for the numerical simulation of physical systems that involve the non-linear interaction of multi-phase reactive fluids and elastoplastic solids, inducing high strain-rates and high deformations. Each state of matter is governed by a single system of non-linear, inhomogeneous partial differential equations, which are solved simultaneously on the sa… ▽ More This article presents a multi-physics methodology for the numerical simulation of physical systems that involve the non-linear interaction of multi-phase reactive fluids and elastoplastic solids, inducing high strain-rates and high deformations. Each state of matter is governed by a single system of non-linear, inhomogeneous partial differential equations, which are solved simultaneously on the same computational grid, and do not require special treatment of immersed boundaries. To this end, the governing equations for solid and reactive multiphase fluid mechanics are written in the same mathematical form and are discretised on a regular Cartesian mesh. All phase and material boundaries are treated as diffuse interfaces. An interface-steepening technique is employed at material boundaries to keep interfaces sharp whilst maintaining the conservation properties of the system. These algorithms are implemented in a highly-parallelised hierarchical adaptive mesh refinement platform, and are verified and validated using numerical and experimental benchmarks. Results indicate very good agreement with experiment and an improvement of numerical performance compared to certain existing Eulerian methods, without loss of conservation. △ Less

Submitted 21 May, 2021; v1 submitted 30 September, 2020; originally announced September 2020.

Journal ref: Computers & Structures, Volume 254, 2021

ShapeAssembly: Learning to Generate Programs for 3D Shape Structure Synthesis

Authors: R. Kenny Jones, Theresa Barton, Xianghao Xu, Kai Wang, Ellen Jiang, Paul Guerrero, Niloy J. Mitra, Daniel Ritchie

Abstract: Manually authoring 3D shapes is difficult and time consuming; generative models of 3D shapes offer compelling alternatives. Procedural representations are one such possibility: they offer high-quality and editable results but are difficult to author and often produce outputs with limited diversity. On the other extreme are deep generative models: given enough data, they can learn to generate any c… ▽ More Manually authoring 3D shapes is difficult and time consuming; generative models of 3D shapes offer compelling alternatives. Procedural representations are one such possibility: they offer high-quality and editable results but are difficult to author and often produce outputs with limited diversity. On the other extreme are deep generative models: given enough data, they can learn to generate any class of shape but their outputs have artifacts and the representation is not editable. In this paper, we take a step towards achieving the best of both worlds for novel 3D shape synthesis. We propose ShapeAssembly, a domain-specific "assembly-language" for 3D shape structures. ShapeAssembly programs construct shapes by declaring cuboid part proxies and attaching them to one another, in a hierarchical and symmetrical fashion. Its functions are parameterized with free variables, so that one program structure is able to capture a family of related shapes. We show how to extract ShapeAssembly programs from existing shape structures in the PartNet dataset. Then we train a deep generative model, a hierarchical sequence VAE, that learns to write novel ShapeAssembly programs. The program captures the subset of variability that is interpretable and editable. The deep model captures correlations across shape collections that are hard to express procedurally. We evaluate our approach by comparing shapes output by our generated programs to those from other recent shape structure synthesis models. We find that our generated shapes are more plausible and physically-valid than those of other methods. Additionally, we assess the latent spaces of these models, and find that ours is better structured and produces smoother interpolations. As an application, we use our generative model and differentiable program interpreter to infer and fit shape programs to unstructured geometry, such as point clouds. △ Less

Submitted 16 September, 2020; originally announced September 2020.

Comments: Accepted to Siggraph Asia 2020; project page: https://rkjones4.github.io/shapeAssembly.html

Are Type Ia Supernovae in Restframe $H$ Brighter in More Massive Galaxies?

Authors: Kara A. Ponder, W. Michael Wood-Vasey, Anja Weyant, Nathan T. Barton, Lluis Galbany, Shu Liu, Peter Garnavich, Thomas Matheson

Abstract: We analyze 143 Type Ia supernovae (SNeIa) observed in $H$ band (1.6-1.8 $μ$m) and find SNeIa are intrinsically brighter in $H$-band with increasing host galaxy stellar mass. We find SNeIa in galaxies more massive than $10^{10.43} M_{\odot}$ are $0.13 \pm 0.04$ mag brighter in $H$ than SNeIa in less massive galaxies. The same set of SNeIa observed at optical wavelengths, after width-color-luminosit… ▽ More We analyze 143 Type Ia supernovae (SNeIa) observed in $H$ band (1.6-1.8 $μ$m) and find SNeIa are intrinsically brighter in $H$-band with increasing host galaxy stellar mass. We find SNeIa in galaxies more massive than $10^{10.43} M_{\odot}$ are $0.13 \pm 0.04$ mag brighter in $H$ than SNeIa in less massive galaxies. The same set of SNeIa observed at optical wavelengths, after width-color-luminosity corrections, exhibit a $0.10 \pm 0.03$ mag offset in the Hubble residuals. We observe an outlier population ($|ΔH_{\rm max}| > 0.5$ mag) in the $H$ band and show that removing the outlier population moves the mass threshold to $10^{10.65} M_{\odot}$ and reduces the step in $H$ band to $0.08 \pm 0.04$ mag, but the equivalent optical mass step is increased to $0.13 \pm 0.04$ mag. We conclude the outliers do not drive the brightness--host-mass correlation. Less massive galaxies preferentially host more higher-stretch SNeIa, which are intrinsically brighter and bluer. It is only after correction for width-luminosity and color-luminosity relationships that SNeIa have brighter optical Hubble residuals in more massive galaxies. Thus finding SNeIa are intrinsically brighter in $H$ in more massive galaxies is an opposite correlation to the intrinsic (pre-width-luminosity correction) optical brightness. If dust and the treatment of intrinsic color variation were the main driver of the host galaxy mass correlation, we would not expect a correlation of brighter $H$-band SNeIa in more massive galaxies. △ Less

Submitted 2 October, 2021; v1 submitted 24 June, 2020; originally announced June 2020.

Comments: 54 pages, 21 Figures, 15 Tables. Accepted to the Astrophysical Journal

Structural distortion below the Néel temperature in spinel GeCo$_2$O$_4$

Authors: Phillip T. Barton, Moureen C. Kemei, Michael W. Gaultois, Stephanie L. Moffitt, Lucy E. Darago, Ram Seshadri, Matthew R. Suchomel, Brent C. Melot

Abstract: A structural phase transition from cubic $Fd\bar{3}m$ to tetragonal $I$4$_1$/$amd$ symmetry with $c/a >$ 1 is observed at $T_{\rm{S}}$ = 16 K in spinel GeCo$_2$O$_4$ below the Néel temperature $T_N$ = 21 K. Structural and magnetic ordering appear to be decoupled with the structural distortion occurring at 16 K while magnetic order occurs at 21 K as determined by magnetic susceptibility and heat ca… ▽ More A structural phase transition from cubic $Fd\bar{3}m$ to tetragonal $I$4$_1$/$amd$ symmetry with $c/a >$ 1 is observed at $T_{\rm{S}}$ = 16 K in spinel GeCo$_2$O$_4$ below the Néel temperature $T_N$ = 21 K. Structural and magnetic ordering appear to be decoupled with the structural distortion occurring at 16 K while magnetic order occurs at 21 K as determined by magnetic susceptibility and heat capacity measurements. An elongation of CoO$_6$ octahedra is observed in the tetragonal phase of GeCo$_2$O$_4$. We present the complete crystallographic description of GeCo$_2$O$_4$ in the tetragonal $I$4$_1$/$amd$ space group and discuss the possible origin of this distortion in the context of known structural transitions in magnetic spinels. GeCo$_2$O$_4$ exhibits magnetodielectric coupling below $T_{\rm{N}}$. The related spinels GeFe$_2$O$_4$ and GeNi$_2$O$_4$ have also been examined for comparison. Structural transitions were not detected in either compound down to $T \approx$ 8 K. Magnetometry experiments reveal in GeFe$_2$O$_4$ a second antiferromagnetic transition, with $T_{\rm{N1}}$ = 7.9 K and $T_{\rm{N2}}$ = 6.2 K, that was previously unknown, and that bear a similarity to the magnetism of GeNi$_2$O$_4$. △ Less

Submitted 27 May, 2014; originally announced May 2014.

First-principles study of band alignments in the p-type hosts BaM2X2 (M = Cu, Ag; X = S, Se)

Authors: Aditi Krishnapriyan, Phillip T. Barton, Maosheng Miao, Ram Seshadri

Abstract: The electronic structures of four semiconductor compounds BaCu2S2, BaCu2Se2, BaAg2S2, and BaAg2Se2 are studied by density functional theory using both semi-local and hybrid functionals. The ionization energies and electron affinities were determined by aligning the electronic states with the vacuum level by calculating the electrostatic profile within a supercell slab model. The ionization energy… ▽ More The electronic structures of four semiconductor compounds BaCu2S2, BaCu2Se2, BaAg2S2, and BaAg2Se2 are studied by density functional theory using both semi-local and hybrid functionals. The ionization energies and electron affinities were determined by aligning the electronic states with the vacuum level by calculating the electrostatic profile within a supercell slab model. The ionization energy and electron affinity of the compounds were calculated using the Heyd-Scuseria-Ernzerhof (HSE) functionals and range from 4.5 to 5.4 eV and 3.1 to 3.4 eV, respectively. The replacement of Cu by Ag slightly increases the ionization energy and electron affinity, while the replacement of S by Se decreases the ionization energy but slightly increases the electron affinity. Overall, the low ionization energies and small electron affinities suggest that these compounds possess good p-type do** propensities. The band gaps are somewhat small to be ideal candidates for transparent semiconducting behavior. The replacement of Cu with Ag in the barium sulfide compounds can increase the band gap from 1.62 eV to 2.01 eV. △ Less

Submitted 12 September, 2013; originally announced September 2013.

Magnetocapacitance as a sensitive probe of magnetostructural changes in NiCr$_2$O$_4$

Authors: Taylor D. Sparks, Moureen C. Kemei, Phillip T. Barton, R. Seshadri, Eun-Deok Mun, Vivien Zapf

Abstract: The spinel NiCr$_2$O$_4$ is characterized using dielectric and high magnetic field measurements. The trends in the magnetodielectric response fall into three clear temperature regimes corresponding to known magnetic and structural transitions. Above 65\,K, weak magnetic field dependence of the dielectric constant is observed with no hysteresis. When 30\,K\,$\leq\,T\,\leq$\,65\,K, a strong dependen… ▽ More The spinel NiCr$_2$O$_4$ is characterized using dielectric and high magnetic field measurements. The trends in the magnetodielectric response fall into three clear temperature regimes corresponding to known magnetic and structural transitions. Above 65\,K, weak magnetic field dependence of the dielectric constant is observed with no hysteresis. When 30\,K\,$\leq\,T\,\leq$\,65\,K, a strong dependence of the dielectric constant on the magnetic field is observed and hysteresis develops resulting in so called butterfly loops. Below 30\,K, magnetodielectric hysteresis is enhanced. Magnetodielectric hysteresis mirrors magnetic hysteresis suggesting that spin-spin interactions are the mechanism for the magnetoelectric effect in NiCr$_2$O$_4$. At high fields however, the magnetization continues to increase while the dielectric constant saturates. Magnetodielectric measurements of NiCr$_2$O$_4$ suggest an additional, previously unobserved transition at 20\,K. Subtle changes in magnetism and structure suggest that this 20\,K anomaly corresponds to the completion of ferrimagnetic ordering and the spin driven structural distortion. We demonstrate that magnetocapacitance is a sensitive probe of magnetostructural distortion. △ Less

Submitted 30 August, 2013; originally announced September 2013.

Magnetostructural transition, metamagnetism, and magnetic phase coexistence in Co10Ge3O16

Authors: Phillip T. Barton, Ram Seshadri, Anna Llobet, Matthew R. Suchomel

Abstract: Co10Ge3O16 crystallizes in an intergrowth structure featuring alternating layers of spinel and rock salt. Variable-temperature powder synchrotron X-ray and neutron diffraction, magnetometry, and heat capacity experiments reveal a magnetostructural transition at T_N = 203 K. This rhombohedral-to-monoclinic transition involves a slight elongation of the CoO6 octahedra along the apical axis. Below T_… ▽ More Co10Ge3O16 crystallizes in an intergrowth structure featuring alternating layers of spinel and rock salt. Variable-temperature powder synchrotron X-ray and neutron diffraction, magnetometry, and heat capacity experiments reveal a magnetostructural transition at T_N = 203 K. This rhombohedral-to-monoclinic transition involves a slight elongation of the CoO6 octahedra along the apical axis. Below T_N, the application of a large magnetic field causes a reorientation of the Co^2+ Ising spins. This metamagnetic transition is first-order as evidenced by a latent heat observed in temperature-dependent measurements. This transition is initially seen at T = 180 K as a broad upturn in the M-H near H_C = 3.9 T. The upturn sharpens into a kink at T = 120 K and a "butterfly" shape emerges, with the transition causing hysteresis at high fields while linear and reversible behavior persists at low fields. H_C decreases as temperature is lowered and the loops at positive and negative fields merge beneath T = 20 K. The antiferromagnetism is described by k_M = (00 1/2) and below T = 20 K a small uncompensated component with k_M = (000) spontaneously emerges. Despite the Curie-Weiss analysis and ionic radius indicating the Co2+ is in its high-spin state, the low-temperature M-H trends toward saturation at M_S = 1.0 uB/Co. We conclude that the field-induced state is a ferrimagnet, rather than a S = 1/2 ferromagnet. The unusual H-T phase diagram is discussed with reference to other metamagnets and Co(II) systems. △ Less

Submitted 10 July, 2013; v1 submitted 17 April, 2013; originally announced April 2013.

Journal ref: Phys. Rev. B 88, 024403 (2013) [7 pages]

Crystal structures of spin-Jahn-Teller ordered MgCr_2O_4 and ZnCr_2O_4

Authors: Moureen C. Kemei, Phillip T. Barton, Stephanie L. Moffitt, Michael W. Gaultois, Joshua A. Kurzman, Ram Seshadri, Matthew R. Suchomel, Young-II Kim

Abstract: Magnetic ordering in the geometrically frustrated magnetic oxide spinels MgCr_2O_4 and ZnCr_2O_4 is accompanied by a structural change that helps relieve the frustration. Analysis of high-resolution synchrotron X-ray scattering reveals that the low-temperature structures are well described by a two-phase model of tetragonal I4_1/amd and orthorhombic Fddd symmetries. The Cr_4 tetrahedra of the pyro… ▽ More Magnetic ordering in the geometrically frustrated magnetic oxide spinels MgCr_2O_4 and ZnCr_2O_4 is accompanied by a structural change that helps relieve the frustration. Analysis of high-resolution synchrotron X-ray scattering reveals that the low-temperature structures are well described by a two-phase model of tetragonal I4_1/amd and orthorhombic Fddd symmetries. The Cr_4 tetrahedra of the pyrochlore lattice are distorted at these low-temperatures, with the Fddd phase displaying larger distortions than the I4_1/amd phase. The spin-Jahn-Teller distortion is approximately one order of magnitude smaller than is observed in first-order Jahn-Teller spinels such as NiCr_2O_4 and CuCr_2O_4. In analogy with NiCr_2O_4 and CuCr_2O_4, we further suggest that the precise nature of magnetic ordering can itself provide a second driving force for structural change. △ Less

Submitted 5 March, 2013; v1 submitted 22 February, 2013; originally announced February 2013.

Structural disorder, magnetism, and electrical and thermoelectric properties of pyrochlore Nd2Ru2O7

Authors: Michael W. Gaultois, Phillip T. Barton, Christina S. Birkel, Lauren M. Misch, Efrain E. Rodriguez, Galen D. Stucky, Ram Seshadri

Abstract: Polycrystalline Nd2Ru2O7 samples have been prepared and examined using a combination of structural, magnetic, and electrical and thermal transport studies. Analysis of synchrotron X-ray and neutron diffraction patterns suggests some site disorder on the A-site in the pyrochlore sublattice: Ru substitutes on the Nd-site up to 7.0(3)%, regardless of the different preparative conditions explored. Int… ▽ More Polycrystalline Nd2Ru2O7 samples have been prepared and examined using a combination of structural, magnetic, and electrical and thermal transport studies. Analysis of synchrotron X-ray and neutron diffraction patterns suggests some site disorder on the A-site in the pyrochlore sublattice: Ru substitutes on the Nd-site up to 7.0(3)%, regardless of the different preparative conditions explored. Intrinsic magnetic and electrical transport properties have been measured. Ru 4d spins order antiferromagnetically at 143 K as seen both in susceptibility and specific heat, and there is a corresponding change in the electrical resistivity behaviour. A second antiferromagnetic ordering transition seen below 10 K is attributed to ordering of Nd 4f spins. Nd2Ru2O7 is an electrical insulator, and this behaviour is believed to be independent of the Ru-antisite disorder on the Nd site. The electrical properties of Nd2Ru2O7 are presented in the light of data published on all A2Ru2O7 pyrochlores, and we emphasize the special structural role that Bi3+ ions on the A-site play in driving metallic behaviour. High-temperature thermoelectric properties have also been measured. When considered in the context of known thermoelectric materials with useful figures-of-merit, it is clear that Nd2Ru2O7 has excessively high electrical resistivity which prevents it from being an effective thermoelectric. A method for screening candidate thermoelectrics is suggested. △ Less

Submitted 28 January, 2013; originally announced January 2013.

Comments: 19 pages, 10 figures

Structural and magnetic characterization of the complete delafossite solid solution (CuAlO2){1-x}(CuCrO2){x}

Authors: Phillip T. Barton, Ram Seshadri, Andrea Knöller, Matthew J. Rosseinsky

Abstract: We have prepared the complete delafossite solid solution series between diamagnetic CuAlO2 and the t2g^3 frustrated antiferromagnet CuCrO2. The evolution with composition x in CuAl(1-x)Cr(x)O2 of the crystal structure and magnetic properties has been studied and is reported here. The room-temperature unit cell parameters follow the Vegard law and increase with x as expected. The effective moment i… ▽ More We have prepared the complete delafossite solid solution series between diamagnetic CuAlO2 and the t2g^3 frustrated antiferromagnet CuCrO2. The evolution with composition x in CuAl(1-x)Cr(x)O2 of the crystal structure and magnetic properties has been studied and is reported here. The room-temperature unit cell parameters follow the Vegard law and increase with x as expected. The effective moment is equal to the Cr^3+ spin-only S = 3/2 value throughout the entire solid solution. Theta is negative, indicating that the dominant interactions are antiferromagnetic, and its magnitude increases with Cr substitution. For dilute Cr compositions, J_BB was estimated by mean-field theory to be 2.0 meV. Despite the sizable Theta, long-range antiferromagnetic order does not develop until very large x, and is preceeded by glassy behavior. Data presented here, and that on dilute Al-substitution from Okuda et al., suggest that the reduction in magnetic frustration due to the presence of non-magnetic Al does not have as dominant an effect on magnetism as chemical disorder and dilution of the magnetic exchange. For all samples, the 5 K isothermal magnetization does not saturate in fields up to 5 T and minimal hysteresis is observed. The presence of antiferromagnetic interactions is clearly evident in the sub-Brillouin behavior with a reduced magnetization per Cr atom. An inspection of the scaled Curie plot reveals that significant short-range antiferromagnetic interactions occur in CuCrO2 above its Neel temperature, consistent with its magnetic frustration. Uncompensated short-range interactions are present in the Al-substituted samples and are likely a result of chemical disorder. △ Less

Submitted 9 January, 2012; v1 submitted 2 October, 2011; originally announced October 2011.

Journal ref: J. Phys.: Condens. Matter 24 (2012) 016002 [6 pages]

Electrical and magnetic properties of the complete solid solution series between SrRuO3 and LaRhO3: Filling t2g versus tilting

Authors: Phillip T. Barton, Ram Seshadri, Matthew J. Rosseinsky

Abstract: A complete solid solution series between the t2g^4 perovskite ferromagnet SrRuO3 and the diamagnetic t2g^6 perovskite LaRhO3 has been prepared. The evolution with composition x in (SrRuO3)(1-x)(LaRhO3)(x) of the crystal structure and electrical and magnetic properties has been studied and is reported here. As x increases, the octahedral tilt angle gradually increases, along with the pseudocubic la… ▽ More A complete solid solution series between the t2g^4 perovskite ferromagnet SrRuO3 and the diamagnetic t2g^6 perovskite LaRhO3 has been prepared. The evolution with composition x in (SrRuO3)(1-x)(LaRhO3)(x) of the crystal structure and electrical and magnetic properties has been studied and is reported here. As x increases, the octahedral tilt angle gradually increases, along with the pseudocubic lattice parameter and unit cell volume. Electrical resistivity measurements reveal a compositionally driven metal to insulator transition between x = 0.1 and 0.2. Ferromagnetic ordering gives over to glassy magnetism for x > 0.3 and no magnetic ordering is found above 2 K for x > 0.5. M_sat and Theta_CW decrease with increasing x and remain constant after x = 0.5. The magnetism appears poised between localized and itinerant behavior, and becomes more localized with increasing x as evidenced by the evolution of the Rhodes-Wohlfarth ratio. mu_eff per Ru is equal to the quenched spin-only S value across the entire solid solution. Comparisons with Sr(1-x)Ca(x)RuO3 reinforce the important role of structural distortions in determining magnetic ground state. It is suggested that electrical transport and magnetic properties are not strongly coupled in this system. △ Less

Submitted 9 January, 2012; v1 submitted 13 October, 2010; originally announced October 2010.

Journal ref: Phys. Rev. B 83, 064417 (2011) [8 pages]