-
An Upper Limit on the Photoproduction Cross Section of the Spin-Exotic $π_1(1600)$
Authors:
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
S. Arrigo,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
D. Barton,
V. Baturin,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
S. Cao,
E. Chudakov,
G. Chung,
P. L. Cole
, et al. (124 additional authors not shown)
Abstract:
The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction c…
▽ More
The spin-exotic hybrid meson $π_{1}(1600)$ is predicted to have a large decay rate to the $ωππ$ final state. Using 76.6~pb$^{-1}$ of data collected with the GlueX detector, we measure the cross sections for the reactions $γp \to ωπ^+ π^- p$, $γp \to ωπ^0 π^0 p$, and $γp\toωπ^-π^0Δ^{++}$ in the range $E_γ=$ 8-10 GeV. Using isospin conservation, we set the first upper limits on the photoproduction cross sections of the $π^{0}_{1}(1600)$ and $π^{-}_{1}(1600)$. We combine these limits with lattice calculations of decay widths and find that photoproduction of $η'π$ is the most sensitive two-body system to search for the $π_1(1600)$.
△ Less
Submitted 3 July, 2024;
originally announced July 2024.
-
High-power and narrow-linewidth laser on thin-film lithium niobate enabled by photonic wire bonding
Authors:
Cornelis A. A. Franken,
Rebecca Cheng,
Keith Powell,
Georgios Kyriazidis,
Victoria Rosborough,
Juergen Musolf,
Maximilian Shah,
David R. Barton III,
Gage Hills,
Leif Johansson,
Klaus-J. Boller,
Marko Lončar
Abstract:
Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high-performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platfo…
▽ More
Thin-film lithium niobate (TFLN) has emerged as a promising platform for the realization of high-performance chip-scale optical systems, spanning a range of applications from optical communications to microwave photonics. Such applications rely on the integration of multiple components onto a single platform. However, while many of these components have already been demonstrated on the TFLN platform, to date, a major bottleneck of the platform is the existence of a tunable, high-power, and narrow-linewidth on-chip laser. Here, we address this problem using photonic wire bonding to integrate optical amplifiers with a thin-film lithium niobate feedback circuit, and demonstrate an extended cavity diode laser yielding high on-chip power of 78 mW, side mode suppression larger than 60 dB and wide wavelength tunability over 43 nm. The laser frequency stability over short timescales shows an ultra-narrow intrinsic linewidth of 550 Hz, while long-term recordings indicate a high passive stability of the photonic wire bonded laser with 46 hours of mode-hop-free operation. This work verifies photonic wire bonding as a viable integration solution for high performance on-chip lasers, opening the path to system level upscaling and Watt-level output powers.
△ Less
Submitted 28 June, 2024;
originally announced July 2024.
-
Measurement of Spin-Density Matrix Elements in $Δ^{++}(1232)$ photoproduction
Authors:
F. Afzal,
C. S. Akondi,
M. Albrecht,
M. Amaryan,
S. Arrigo,
V. Arroyave,
A. Asaturyan,
A. Austregesilo,
Z. Baldwin,
F. Barbosa,
J. Barlow,
E. Barriga,
R. Barsotti,
D. Barton,
V. Baturin,
V. V. Berdnikov,
T. Black,
W. Boeglin,
M. Boer,
W. J. Briscoe,
T. Britton,
S. Cao,
E. Chudakov,
G. Chung,
P. L. Cole
, et al. (124 additional authors not shown)
Abstract:
We report the measurement of spin-density matrix elements of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement used a linearly polarized photon beam with $E_γ=8.2-8.8$~GeV and the statistical precision exceeds the previous measurement from SLAC by three orders of magnitude for the momentum transfer squa…
▽ More
We report the measurement of spin-density matrix elements of the $Δ^{++}(1232)$ in the photoproduction reaction $γp \to π^-Δ^{++}(1232)$ with the GlueX experiment in Hall D at Jefferson Lab. The measurement used a linearly polarized photon beam with $E_γ=8.2-8.8$~GeV and the statistical precision exceeds the previous measurement from SLAC by three orders of magnitude for the momentum transfer squared region $-t < 1.4$ GeV$^2$. The data are sensitive to the previously undetermined relative sign between couplings in existing Regge exchange models. Linear combinations of the extracted SDMEs allow for a decomposition into natural and unnatural exchange amplitudes, which shows that the unnatural exchange plays an important role in the low $-t$ region.
△ Less
Submitted 18 June, 2024;
originally announced June 2024.
-
Iterative method for real-time Hybrid testing: application to a cantilever beam with two interface degrees of freedom
Authors:
Alessandra Vizzaccaro,
Sandor Beregi,
David A. W. Barton,
Simon A. Neild
Abstract:
In this paper, an iterative method for real-time hybrid testing (RTHT) is proposed. The method seeks to iteratively balance the interface conditions between the physical and numerical substructures by controlling the periodic demand of the actuators. It is then suitable for RTHT of structures undergoing a periodic response, e.g. structures excited at resonance. We demonstrate the capabilities of t…
▽ More
In this paper, an iterative method for real-time hybrid testing (RTHT) is proposed. The method seeks to iteratively balance the interface conditions between the physical and numerical substructures by controlling the periodic demand of the actuators. It is then suitable for RTHT of structures undergoing a periodic response, e.g. structures excited at resonance. We demonstrate the capabilities of the method on a cantilever beam in bending motion with two degrees of freedom at the interface, which we use as a prototype for future testing of aircraft wings. We show that a number of challenges arise in these settings, such as the difficulty in measuring interface forces while controlling a continuous structure and the instability of the hybrid test for small time delays. Classical RTHT strategies could produce inaccurate or unstable outcomes, whereas the proposed method is able to attain very good interface synchronisation in a wide range of tested scenarios.
△ Less
Submitted 12 June, 2024;
originally announced June 2024.
-
Realtime observation of a tungsten-promoted size regulation mechanism in a rhodium catalyst at atomic resolution
Authors:
Petra Specht,
Joo H. Kang,
Kartick Tarafder,
Robert Cieslinski,
David Barton,
Bastian Barton,
Anna Carlsson,
Lin-Wang Wang,
Christian Kisielowski
Abstract:
The static and genuine structure of small rhodium and rhodium/tungsten nanoparticles on an alumina support can be imaged with atomic resolution even if single digit atom clusters are investigated. Low dose rate electron microscopy is key to the achievement and can generally be applied to investigate any similar material. In such conditions it becomes feasible to identify the chemical composition o…
▽ More
The static and genuine structure of small rhodium and rhodium/tungsten nanoparticles on an alumina support can be imaged with atomic resolution even if single digit atom clusters are investigated. Low dose rate electron microscopy is key to the achievement and can generally be applied to investigate any similar material. In such conditions it becomes feasible to identify the chemical composition of nanocrystals from quantitative contrast analyses alone by counting atoms. The ability to fully characterize an unaltered, initial state of the objects allows targeting structural excitations or conformational changes induced by the electron beam itself. For the specific case of catalytic Rh:W particles we stimulate a tungsten-promoted size regulation mechanism in real time that is driven by Oswald ripening and can be understood by a strong binding of tungsten atoms to the oxygen atoms of the support, which builds up strain as the cluster sizes increase.
△ Less
Submitted 9 June, 2024;
originally announced June 2024.
-
AnyRotate: Gravity-Invariant In-Hand Object Rotation with Sim-to-Real Touch
Authors:
Max Yang,
Chenghua Lu,
Alex Church,
Yijiong Lin,
Chris Ford,
Haoran Li,
Efi Psomopoulou,
David A. W. Barton,
Nathan F. Lepora
Abstract:
Human hands are capable of in-hand manipulation in the presence of different hand motions. For a robot hand, harnessing rich tactile information to achieve this level of dexterity still remains a significant challenge. In this paper, we present AnyRotate, a system for gravity-invariant multi-axis in-hand object rotation using dense featured sim-to-real touch. We tackle this problem by training a d…
▽ More
Human hands are capable of in-hand manipulation in the presence of different hand motions. For a robot hand, harnessing rich tactile information to achieve this level of dexterity still remains a significant challenge. In this paper, we present AnyRotate, a system for gravity-invariant multi-axis in-hand object rotation using dense featured sim-to-real touch. We tackle this problem by training a dense tactile policy in simulation and present a sim-to-real method for rich tactile sensing to achieve zero-shot policy transfer. Our formulation allows the training of a unified policy to rotate unseen objects about arbitrary rotation axes in any hand direction. In our experiments, we highlight the benefit of capturing detailed contact information when handling objects with varying properties. Interestingly, despite not having explicit slip detection, we found rich multi-fingered tactile sensing can implicitly detect object movement within grasp and provide a reactive behavior that improves the robustness of the policy. The project website can be found at https://maxyang27896.github.io/anyrotate/.
△ Less
Submitted 11 June, 2024; v1 submitted 12 May, 2024;
originally announced May 2024.
-
A Thin Film Lithium Niobate Near-Infrared Platform for Multiplexing Quantum Nodes
Authors:
Daniel Assumpcao,
Dylan Renaud,
Aida Baradari,
Beibei Zeng,
Chawina De-Eknamkul,
C. J. Xin,
Amirhassan Shams-Ansari,
David Barton,
Bartholomeus Machielse,
Marko Loncar
Abstract:
Practical quantum networks will require quantum nodes consisting of many memory qubits. This in turn will increase the complexity of the photonic circuits needed to control each qubit and will require strategies to multiplex memories and overcome the inhomogeneous distribution of their transition frequencies. Integrated photonics operating at visible to near-infrared (VNIR) wavelength range, compa…
▽ More
Practical quantum networks will require quantum nodes consisting of many memory qubits. This in turn will increase the complexity of the photonic circuits needed to control each qubit and will require strategies to multiplex memories and overcome the inhomogeneous distribution of their transition frequencies. Integrated photonics operating at visible to near-infrared (VNIR) wavelength range, compatible with the transition frequencies of leading quantum memory systems, can provide solutions to these needs. In this work, we realize a VNIR thin-film lithium niobate (TFLN) integrated photonics platform with the key components to meet these requirements. These include low-loss couplers ($<$ 1 dB/facet), switches ($>$ 20 dB extinction), and high-bandwidth electro-optic modulators ($>$ 50 GHz). With these devices we demonstrate high-efficiency and CW-compatible frequency shifting ($>$ 50 $\%$ efficiency at 15 GHz), as well as simultaneous laser amplitude and frequency control through a nested modulator structure. Finally, we highlight an architecture for multiplexing quantum memories using the demonstrated TFLN components, and outline how this platform can enable a 2-order of magnitude improvement in entanglement rates over single memory nodes. Our results demonstrate that TFLN can meet the necessary performance and scalability benchmarks to enable large-scale quantum nodes.
△ Less
Submitted 6 May, 2024;
originally announced May 2024.
-
Neural Context Flows for Learning Generalizable Dynamical Systems
Authors:
Roussel Desmond Nzoyem,
David A. W. Barton,
Tom Deakin
Abstract:
Neural Ordinary Differential Equations typically struggle to generalize to new dynamical behaviors created by parameter changes in the underlying system, even when the dynamics are close to previously seen behaviors. The issue gets worse when the changing parameters are unobserved, i.e., their value or influence is not directly measurable when collecting data. We introduce Neural Context Flow (NCF…
▽ More
Neural Ordinary Differential Equations typically struggle to generalize to new dynamical behaviors created by parameter changes in the underlying system, even when the dynamics are close to previously seen behaviors. The issue gets worse when the changing parameters are unobserved, i.e., their value or influence is not directly measurable when collecting data. We introduce Neural Context Flow (NCF), a framework that encodes said unobserved parameters in a latent context vector as input to a vector field. NCFs leverage differentiability of the vector field with respect to the parameters, along with first-order Taylor expansion to allow any context vector to influence trajectories from other parameters. We validate our method and compare it to established Multi-Task and Meta-Learning alternatives, showing competitive performance in mean squared error for in-domain and out-of-distribution evaluation on the Lotka-Volterra, Glycolytic Oscillator, and Gray-Scott problems. This study holds practical implications for foundational models in science and related areas that benefit from conditional neural ODEs. Our code is openly available at https://github.com/ddrous/ncflow.
△ Less
Submitted 3 May, 2024;
originally announced May 2024.
-
Wavelength-accurate and wafer-scale process for nonlinear frequency mixers in thin-film lithium niobate
Authors:
C. J. Xin,
Shengyuan Lu,
Jiayu Yang,
Amirhassan Shams-Ansari,
Boris Desiatov,
Letícia S. Magalhães,
Soumya S. Ghosh,
Erin McGee,
Dylan Renaud,
Nicholas Achuthan,
Arseniy Zvyagintsev,
David Barton III,
Neil Sinclair,
Marko Lončar
Abstract:
Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectri…
▽ More
Recent advancements in thin-film lithium niobate (TFLN) photonics have led to a new generation of high-performance electro-optic devices, including modulators, frequency combs, and microwave-to-optical transducers. However, the broader adoption of TFLN-based devices that rely on all-optical nonlinearities have been limited by the sensitivity of quasi-phase matching (QPM), realized via ferroelectric poling, to fabrication tolerances. Here, we propose a scalable fabrication process aimed at improving the wavelength-accuracy of optical frequency mixers in TFLN. In contrast to the conventional pole-before-etch approach, we first define the waveguide in TFLN and then perform ferroelectric poling. This sequence allows for precise metrology before and after waveguide definition to fully capture the geometry imperfections. Systematic errors can also be calibrated by measuring a subset of devices to fine-tune the QPM design for remaining devices on the wafer. Using this method, we fabricated a large number of second harmonic generation devices aimed at generating 737 nm light, with 73% operating within 5 nm of the target wavelength. Furthermore, we also demonstrate thermo-optic tuning and trimming of the devices via cladding deposition, with the former bringing ~96% of tested devices to the target wavelength. Our technique enables the rapid growth of integrated quantum frequency converters, photon pair sources, and optical parametric amplifiers, thus facilitating the integration of TFLN-based nonlinear frequency mixers into more complex and functional photonic systems.
△ Less
Submitted 18 April, 2024;
originally announced April 2024.
-
Integrated electro-optics on thin-film lithium niobate
Authors:
Yaowen Hu,
Di Zhu,
Shengyuan Lu,
Xinrui Zhu,
Yunxiang Song,
Dylan Renaud,
Daniel Assumpcao,
Rebecca Cheng,
CJ Xin,
Matthew Yeh,
Hana Warner,
Xiangwen Guo,
Amirhassan Shams-Ansari,
David Barton,
Neil Sinclair,
Marko Loncar
Abstract:
Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film…
▽ More
Electro-optics serves as the crucial bridge between electronics and photonics, unlocking a wide array of applications ranging from communications and computing to sensing and quantum information. Integrated electro-optics approaches in particular enable essential electronic high-speed control for photonics while offering substantial photonic parallelism for electronics. Recent strides in thin-film lithium niobate photonics have ushered revolutionary advancements in electro-optics. This technology not only offers the requisite strong electro-optic coupling but also boasts ultra-low optical loss and high microwave bandwidth. Further, its tight confinement and compatibility with nanofabrication allow for unprecedented reconfigurability and scalability, facilitating the creation of novel and intricate devices and systems that were once deemed nearly impossible in bulk systems. Building upon this platform, the field has witnessed the emergence of various groundbreaking electro-optic devices surpassing the current state of the art, and introducing functionalities that were previously non-existent. This technological leap forward provides a unique framework to explore various realms of physics as well, including photonic non-Hermitian synthetic dimensions, active topological physics, and quantum electro-optics. In this review, we present the fundamental principles of electro-optics, drawing connections between fundamental science and the forefront of technology. We discuss the accomplishments and future prospects of integrated electro-optics, enabled by thin-film lithium niobate platform.
△ Less
Submitted 11 April, 2024; v1 submitted 9 April, 2024;
originally announced April 2024.
-
Real-time hybrid testing using iterative control for periodic oscillations
Authors:
Sandor Beregi,
David A. W. Barton,
Djamel Rezgui,
Simon A. Neild
Abstract:
Real-time hybrid testing is a method in which a substructure of the system is realised experimentally and the rest numerically. The two parts interact in real time to emulate the dynamics of the full system. Such experiments however are often difficult to realise as the actuators and sensors, needed to ensure compatibility and force-equilibrium conditions at the interface, can seriously affect the…
▽ More
Real-time hybrid testing is a method in which a substructure of the system is realised experimentally and the rest numerically. The two parts interact in real time to emulate the dynamics of the full system. Such experiments however are often difficult to realise as the actuators and sensors, needed to ensure compatibility and force-equilibrium conditions at the interface, can seriously affect the predicted dynamics of the system and result in stability and fidelity issues. The traditional approach of using feedback control to overcome the additional unwanted dynamics is challenging due to the presence of an outer feedback loop, passing interface displacements or forces to the numerical substructure. We, therefore, advocate for an alternative approach, removing the problematic interface dynamics with an iterative scheme to minimise interface errors, thus, capturing the response of the true assembly. The technique is examined by hybrid testing of a bench-top four-storey building with different interface configurations, where using conventional hybrid measurement techniques is very challenging. A case where the physical part exhibits nonlinear restoring force characteristics is also considered. These tests show that the iterative approach is capable of handling even scenarios which are theoretically infeasible with feedback control.
△ Less
Submitted 3 June, 2024; v1 submitted 11 December, 2023;
originally announced December 2023.
-
Coherent control of a superconducting qubit using light
Authors:
Hana K. Warner,
Jeffrey Holzgrafe,
Beatriz Yankelevich,
David Barton,
Stefano Poletto,
C. J. Xin,
Neil Sinclair,
Di Zhu,
Eyob Sete,
Brandon Langley,
Emma Batson,
Marco Colangelo,
Amirhassan Shams-Ansari,
Graham Joe,
Karl K. Berggren,
Liang Jiang,
Matthew Reagor,
Marko Loncar
Abstract:
Quantum science and technology promise the realization of a powerful computational resource that relies on a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states [1,2]. While superconducting microwave qubits (3-8 GHz) operating in cryogenic environments have emerged as promising candidates for quantum processor nodes du…
▽ More
Quantum science and technology promise the realization of a powerful computational resource that relies on a network of quantum processors connected with low loss and low noise communication channels capable of distributing entangled states [1,2]. While superconducting microwave qubits (3-8 GHz) operating in cryogenic environments have emerged as promising candidates for quantum processor nodes due to their strong Josephson nonlinearity and low loss [3], the information between spatially separated processor nodes will likely be carried at room temperature via telecommunication photons (200 THz) propagating in low loss optical fibers. Transduction of quantum information [4-10] between these disparate frequencies is therefore critical to leverage the advantages of each platform by interfacing quantum resources. Here, we demonstrate coherent optical control of a superconducting qubit. We achieve this by develo** a microwave-optical quantum transducer that operates with up to 1.18% conversion efficiency (1.16% cooperativity) and demonstrate optically-driven Rabi oscillations (2.27 MHz) in a superconducting qubit without impacting qubit coherence times (800 ns). Finally, we discuss outlooks towards using the transducer to network quantum processor nodes.
△ Less
Submitted 30 October, 2023; v1 submitted 24 October, 2023;
originally announced October 2023.
-
A Comparison of Mesh-Free Differentiable Programming and Data-Driven Strategies for Optimal Control under PDE Constraints
Authors:
Roussel Desmond Nzoyem,
David A. W. Barton,
Tom Deakin
Abstract:
The field of Optimal Control under Partial Differential Equations (PDE) constraints is rapidly changing under the influence of Deep Learning and the accompanying automatic differentiation libraries. Novel techniques like Physics-Informed Neural Networks (PINNs) and Differentiable Programming (DP) are to be contrasted with established numerical schemes like Direct-Adjoint Loo** (DAL). We present…
▽ More
The field of Optimal Control under Partial Differential Equations (PDE) constraints is rapidly changing under the influence of Deep Learning and the accompanying automatic differentiation libraries. Novel techniques like Physics-Informed Neural Networks (PINNs) and Differentiable Programming (DP) are to be contrasted with established numerical schemes like Direct-Adjoint Loo** (DAL). We present a comprehensive comparison of DAL, PINN, and DP using a general-purpose mesh-free differentiable PDE solver based on Radial Basis Functions. Under Laplace and Navier-Stokes equations, we found DP to be extremely effective as it produces the most accurate gradients; thriving even when DAL fails and PINNs struggle. Additionally, we provide a detailed benchmark highlighting the limited conditions under which any of those methods can be efficiently used. Our work provides a guide to Optimal Control practitioners and connects them further to the Deep Learning community.
△ Less
Submitted 2 October, 2023;
originally announced October 2023.
-
Sim-to-Real Model-Based and Model-Free Deep Reinforcement Learning for Tactile Pushing
Authors:
Max Yang,
Yijiong Lin,
Alex Church,
John Lloyd,
Dandan Zhang,
David A. W. Barton,
Nathan F. Lepora
Abstract:
Object pushing presents a key non-prehensile manipulation problem that is illustrative of more complex robotic manipulation tasks. While deep reinforcement learning (RL) methods have demonstrated impressive learning capabilities using visual input, a lack of tactile sensing limits their capability for fine and reliable control during manipulation. Here we propose a deep RL approach to object pushi…
▽ More
Object pushing presents a key non-prehensile manipulation problem that is illustrative of more complex robotic manipulation tasks. While deep reinforcement learning (RL) methods have demonstrated impressive learning capabilities using visual input, a lack of tactile sensing limits their capability for fine and reliable control during manipulation. Here we propose a deep RL approach to object pushing using tactile sensing without visual input, namely tactile pushing. We present a goal-conditioned formulation that allows both model-free and model-based RL to obtain accurate policies for pushing an object to a goal. To achieve real-world performance, we adopt a sim-to-real approach. Our results demonstrate that it is possible to train on a single object and a limited sample of goals to produce precise and reliable policies that can generalize to a variety of unseen objects and pushing scenarios without domain randomization. We experiment with the trained agents in harsh pushing conditions, and show that with significantly more training samples, a model-free policy can outperform a model-based planner, generating shorter and more reliable pushing trajectories despite large disturbances. The simplicity of our training environment and effective real-world performance highlights the value of rich tactile information for fine manipulation. Code and videos are available at https://sites.google.com/view/tactile-rl-pushing/.
△ Less
Submitted 26 July, 2023;
originally announced July 2023.
-
Towards Quantitative Analysis of Deuterium Absorption in Ferrite and Austenite during Electrochemical Charging by Comparing Cyclic Voltammetry and Cryogenic Transfer Atom Probe Tomography
Authors:
Dallin J. Barton,
Dan-Thien Nguyen,
Daniel E. Perea,
Kelsey A. Stoerzinger,
Reyna Morales Lumagui,
Sten V. Lambeets,
Mark G. Wirth,
Arun Devaraj
Abstract:
Hydrogen embrittlement mechanisms of steels have been studied for several decades. Understanding hydrogen diffusion behavior in steels is crucial towards both develo** predictive models for hydrogen embrittlement and identifying mitigation strategies. However, because hydrogen has a low atomic mass, it is extremely challenging to detect by most analytical methods. In recent years, cryogenic-tran…
▽ More
Hydrogen embrittlement mechanisms of steels have been studied for several decades. Understanding hydrogen diffusion behavior in steels is crucial towards both develo** predictive models for hydrogen embrittlement and identifying mitigation strategies. However, because hydrogen has a low atomic mass, it is extremely challenging to detect by most analytical methods. In recent years, cryogenic-transfer atom probe tomography (APT) of electrochemically-deuterium-charged steels has provided invaluable qualitative analysis of nanoscale deuterium traps such as carbides, dislocations, grain boundaries and interfaces between ferrite and cementite. Independently, cyclic voltammetry (CV) has provided valuable analysis of bulk hydrogen diffusion in steels. In this work, we use a combination of CV and cryogenic-transfer APT for quantitative analysis of deuterium pickup in electrolytically charged pure Fe (ferrite) and a model austenitic Fe18Cr14Ni alloy without any second phase or defect trap sites. The high solubility and low diffusivity of hydrogen in austenite versus ferrite are highlighted to result in clear observable signatures in CV and cryogenic-transfer APT results. The remaining challenges and pathway for enabling quantitative analysis of hydrogen pick up in steels is also discussed.
△ Less
Submitted 29 March, 2023;
originally announced March 2023.
-
Modelling of physical systems with a Hopf bifurcation using mechanistic models and machine learning
Authors:
K. H. Lee,
D. A. W. Barton,
L. Renson
Abstract:
We propose a new hybrid modelling approach that combines a mechanistic model with a machine-learnt model to predict the limit cycle oscillations of physical systems with a Hopf bifurcation. The mechanistic model is an ordinary differential equation normal-form model capturing the bifurcation structure of the system. A data-driven map** from this model to the experimental observations is then ide…
▽ More
We propose a new hybrid modelling approach that combines a mechanistic model with a machine-learnt model to predict the limit cycle oscillations of physical systems with a Hopf bifurcation. The mechanistic model is an ordinary differential equation normal-form model capturing the bifurcation structure of the system. A data-driven map** from this model to the experimental observations is then identified based on experimental data using machine learning techniques. The proposed method is first demonstrated numerically on a Van der Pol oscillator and a three-degree-of-freedom aeroelastic model. It is then applied to model the behaviour of a physical aeroelastic structure exhibiting limit cycle oscillations during wind tunnel tests. The method is shown to be general, data-efficient and to offer good accuracy without any prior knowledge about the system other than its bifurcation structure.
△ Less
Submitted 7 September, 2022;
originally announced September 2022.
-
Uncertainty quantification in mechanistic epidemic models via cross-entropy approximate Bayesian computation
Authors:
Americo Cunha Jr,
David A. W. Barton,
Thiago G. Ritto
Abstract:
This paper proposes a data-driven approximate Bayesian computation framework for parameter estimation and uncertainty quantification of epidemic models, which incorporates two novelties: (i) the identification of the initial conditions by using plausible dynamic states that are compatible with observational data; (ii) learning of an informative prior distribution for the model parameters via the c…
▽ More
This paper proposes a data-driven approximate Bayesian computation framework for parameter estimation and uncertainty quantification of epidemic models, which incorporates two novelties: (i) the identification of the initial conditions by using plausible dynamic states that are compatible with observational data; (ii) learning of an informative prior distribution for the model parameters via the cross-entropy method. The new methodology's effectiveness is illustrated with the aid of actual data from the COVID-19 epidemic in Rio de Janeiro city in Brazil, employing an ordinary differential equation-based model with a generalized SEIR mechanistic structure that includes time-dependent transmission rate, asymptomatics, and hospitalizations. A minimization problem with two cost terms (number of hospitalizations and deaths) is formulated, and twelve parameters are identified. The calibrated model provides a consistent description of the available data, able to extrapolate forecasts over a few weeks, making the proposed methodology very appealing for real-time epidemic modeling.
△ Less
Submitted 2 February, 2023; v1 submitted 13 July, 2022;
originally announced July 2022.
-
Femtosecond Pulse Generation via an Integrated Electro-Optic Time Lens
Authors:
Mengjie Yu,
Christian Reimer,
David Barton,
Prashanta Kharel,
Rebecca Cheng,
Lingyan He,
Linbo Shao,
Di Zhu,
Yaowen Hu,
Hannah R. Grant,
Leif Johansson,
Yoshitomo Okawachi,
Alexander L. Gaeta,
Mian Zhang,
Marko Lončar
Abstract:
Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-pi…
▽ More
Integrated femtosecond pulse and frequency comb sources are critical components for a wide range of applications. The leading approaches for on-chip pulse generation rely on mode locking inside microresonator with either third-order nonlinearity or with semiconductor gain. These approaches, however, are limited in noise performance, wavelength tunability and repetition rates. Alternatively, sub-picosecond pulses can be synthesized without mode-locking, by modulating a continuous-wave (CW) single-frequency laser using a cascade of electro-optic (EO) modulators. This method is particularly attractive due to its simplicity, robustness, and frequency-agility but has been realized only on a tabletop using multiple discrete EO modulators and requiring optical amplifiers (to overcome large insertion losses), microwave amplifiers, and phase shifters. Here we demonstrate a chip-scale femtosecond pulse source implemented on an integrated lithium niobate (LN) photonic platform18, using cascaded low-loss electro-optic amplitude and phase modulators and chirped Bragg grating, forming a time-lens system. The device is driven by a CW distributed feedback (DFB) chip laser and controlled by a single CW microwave source without the need for any stabilization or locking. We measure femtosecond pulse trains (520 fs duration) with a 30-GHz repetition rate, flat-top optical spectra with a 10-dB optical bandwidth of 12.6 nm, individual comb-line powers above 0.1 milliwatt, and pulse energies of 0.54 picojoule. Our results represent a tunable, robust and low-cost integrated pulsed light source with CW-to-pulse conversion efficiencies an order of magnitude higher than achieved with previous integrated sources. Our pulse generator can find applications from ultrafast optical measurement to networks of distributed quantum computers.
△ Less
Submitted 16 December, 2021;
originally announced December 2021.
-
Using scientific machine learning for experimental bifurcation analysis of dynamic systems
Authors:
Sandor Beregi,
David A. W. Barton,
Djamel Rezgui,
Simon A. Neild
Abstract:
Augmenting mechanistic ordinary differential equation (ODE) models with machine-learnable structures is an novel approach to create highly accurate, low-dimensional models of engineering systems incorporating both expert knowledge and reality through measurement data. Our exploratory study focuses on training universal differential equation (UDE) models for physical nonlinear dynamical systems wit…
▽ More
Augmenting mechanistic ordinary differential equation (ODE) models with machine-learnable structures is an novel approach to create highly accurate, low-dimensional models of engineering systems incorporating both expert knowledge and reality through measurement data. Our exploratory study focuses on training universal differential equation (UDE) models for physical nonlinear dynamical systems with limit cycles: an aerofoil undergoing flutter oscillations and an electrodynamic nonlinear oscillator. We consider examples where training data is generated by numerical simulations, whereas we also employ the proposed modelling concept to physical experiments allowing us to investigate problems with a wide range of complexity. To collect the training data, the method of control-based continuation is used as it captures not just the stable but also the unstable limit cycles of the observed system. This feature makes it possible to extract more information about the observed system than the open-loop approach (surveying the steady state response by parameter sweeps without using control) would allow. We use both neural networks and Gaussian processes as universal approximators alongside the mechanistic models to give a critical assessment of the accuracy and robustness of the UDE modelling approach. We also highlight the potential issues one may run into during the training procedure indicating the limits of the current modelling framework.
△ Less
Submitted 18 June, 2022; v1 submitted 22 October, 2021;
originally announced October 2021.
-
High quality factor silicon-on-lithium niobate metasurfaces for electro-optically reconfigurable wavefront sha**
Authors:
Elissa Klopfer,
Sahil Dagli,
David Barton III,
Mark Lawrence,
Jennifer A. Dionne
Abstract:
Dynamically reconfigurable metasurfaces promise compact and lightweight spatial light modulation for many applications, including LiDAR, AR/VR, and LiFi systems. Here, we design and computationally investigate high quality factor silicon-on-lithium niobate metasurfaces with electrically-driven, independent control of its constituent nanobars for full phase tunability with high tuning efficiency. F…
▽ More
Dynamically reconfigurable metasurfaces promise compact and lightweight spatial light modulation for many applications, including LiDAR, AR/VR, and LiFi systems. Here, we design and computationally investigate high quality factor silicon-on-lithium niobate metasurfaces with electrically-driven, independent control of its constituent nanobars for full phase tunability with high tuning efficiency. Free-space light couples to guided modes within each nanobar via periodic perturbations, generating quality factors exceeding 30,000, while maintaining bar spacing <$λ$/1.5. We achieve nearly 2$π$ phase variation with an applied bias not exceeding $\pm$ 25 V, maintaining reflection efficiency above 91%. Using full-field simulations, we demonstrate a high angle, 51°, switchable beamsplitter with a diffracted efficiency of 93%, and an angle-tunable beamsteerer, spanning 18-31°, with up to 86% efficiency, all using the same metasurface device. Our platform provides a foundation for highly efficient wavefront sha** devices with a wide dynamic tuning range capable of generating nearly any transfer function.
△ Less
Submitted 24 March, 2022; v1 submitted 8 October, 2021;
originally announced October 2021.
-
Reduced-order modelling of flutter oscillations using normal forms and scientific machine learning
Authors:
K. H. Lee,
D. A. W. Barton,
L. Renson
Abstract:
This paper introduces a machine learning approach to take a nonlinear differential-equation model that exhibits qualitative agreement with a physical experiment over a range of parameter values and produce a hybrid model that also exhibits quantitative agreement. The underpinning idea is that the bifurcation experiment structure of an experiment can be revealed using techniques such as control-bas…
▽ More
This paper introduces a machine learning approach to take a nonlinear differential-equation model that exhibits qualitative agreement with a physical experiment over a range of parameter values and produce a hybrid model that also exhibits quantitative agreement. The underpinning idea is that the bifurcation experiment structure of an experiment can be revealed using techniques such as control-based continuation and then used to generate a simplified normal-form-like model. A machine learning approach is then used to learn a coordinate transform from the normal-form-like model to the physical coordinates of the experiment. This approach is demonstrated on a mathematical model of aero-elastic flutter, where good agreement at the level of the bifurcation diagrams is shown between the hybrid model and the underlying ground truth. Moreover, individual phase portraits and time series are also reproduced accurately, even in regions away from training data. As such, the approach holds significant promise for producing quantitatively accurate models that exhibit the correct nonlinear behaviour over a range of parameter values.
△ Less
Submitted 23 August, 2022; v1 submitted 3 November, 2020;
originally announced November 2020.
-
Interactions between Large Molecules: Puzzle for Reference Quantum-Mechanical Methods
Authors:
Yasmine S. Al-Hamdani,
Péter R. Nagy,
Dennis Barton,
Mihály Kállay,
Jan Gerit Brandenburg,
Alexandre Tkatchenko
Abstract:
Quantum-mechanical methods are widely used for understanding molecular interactions throughout biology, chemistry, and materials science. Quantum diffusion Monte Carlo (DMC) and coupled cluster with single, double, and perturbative triple excitations [CCSD(T)] are two state-of-the-art and trusted wavefunction methods that have been categorically shown to yield accurate interaction energies for sma…
▽ More
Quantum-mechanical methods are widely used for understanding molecular interactions throughout biology, chemistry, and materials science. Quantum diffusion Monte Carlo (DMC) and coupled cluster with single, double, and perturbative triple excitations [CCSD(T)] are two state-of-the-art and trusted wavefunction methods that have been categorically shown to yield accurate interaction energies for small organic molecules. These methods provide valuable reference information for widely-used semi-empirical and machine learning potentials, especially where experimental information is scarce. However, agreement for systems beyond small molecules is a crucial remaining milestone for cementing the benchmark accuracy of these methods. Approaching such well-converged predictive power in larger molecules has motivated major developments in CCSD(T) as well as DMC algorithms in the past years, resulting in orders of magnitude time-to-solution reductions. Here, we show that CCSD(T) and DMC interaction energies are not in consistent agreement for a set of polarizable supramolecules. Whilst agreement is found for some of the complexes, in a few key systems disagreements of up to 8 kcal/mol remained. This leads to differences of up to 6 orders of magnitude in the corresponding binding association constant at room temperature for systems which are well within the accustomed domain of applicability for both methods. These findings thus indicate that more caution is required when aiming at reproducible non-covalent interactions between extended molecules. Our data contradicts the expectation that the most comprehensive and robust wavefunction methods predict identical non-covalent interactions and indicate an unsolved challenge for benchmark approaches.
△ Less
Submitted 18 September, 2020;
originally announced September 2020.
-
Walking on TacTip toes: A tactile sensing foot for walking robots
Authors:
Elizabeth A. Stone,
Nathan F. Lepora,
David A. W. Barton
Abstract:
Little research into tactile feet has been done for walking robots despite the benefits such feedback could give when walking on uneven terrain. This paper describes the development of a simple, robust and inexpensive tactile foot for legged robots based on a high-resolution biomimetic TacTip tactile sensor. Several design improvements were made to facilitate tactile sensing while walking, includi…
▽ More
Little research into tactile feet has been done for walking robots despite the benefits such feedback could give when walking on uneven terrain. This paper describes the development of a simple, robust and inexpensive tactile foot for legged robots based on a high-resolution biomimetic TacTip tactile sensor. Several design improvements were made to facilitate tactile sensing while walking, including the use of phosphorescent markers to remove the need for internal LED lighting. The usefulness of the foot is verified on a quadrupedal robot performing a beam walking task and it is found the sensor prevents the robot falling off the beam. Further, this capability also enables the robot to walk along the edge of a curved table. This tactile foot design can be easily modified for use with any legged robot, including much larger walking robots, enabling stable walking in challenging terrain.
△ Less
Submitted 12 August, 2020;
originally announced August 2020.
-
Ultra-low do** and local charge variation in graphene measured by Raman: experiment and simulation
Authors:
Zhuofa Chen,
Nathan Ullberg,
Mounika Vutukuru,
David Barton,
Anna K Swan
Abstract:
Avoiding charge density variations and impurities in graphene is vital for high-quality graphene-based devices. Here, we demonstrate an optical method using Raman 2D peak-split to monitor charge density variations in the range 1-25e10 cm-2. We compare Raman signatures with electrostatically gated Raman and transport measurements to correlate the 2D peak-split with the charge density on graphene wi…
▽ More
Avoiding charge density variations and impurities in graphene is vital for high-quality graphene-based devices. Here, we demonstrate an optical method using Raman 2D peak-split to monitor charge density variations in the range 1-25e10 cm-2. We compare Raman signatures with electrostatically gated Raman and transport measurements to correlate the 2D peak-split with the charge density on graphene with high precision. We found that the Raman 2D peak-split and peak areas linearly varies with the charge density, where a lower charge density results in a larger 2D peak-split. We simulate Raman 2D spectra under various do** conditions to study the correlation between Raman 2D peak and charge puddles. These simulations give qualitative agreement with experimental results. Our work provides a simple and non-invasive optical method for estimating the do** level, local charge density variation and transport properties of graphene before fabricating graphene devices, with up to two orders of magnitude higher precision than previously reported optical methods.
△ Less
Submitted 8 May, 2020;
originally announced May 2020.
-
Robustness of nonlinear parameter identification in presence of process noise using control-based continuation
Authors:
Sandor Beregi,
David A. W. Barton,
Djamel Rezgui,
Simon A. Neild
Abstract:
In this study, we consider the experimentally-obtained, periodically-forced response of a nonlinear structure in the presence of process noise. Control-based continuation is used to measure both the stable and unstable periodic solutions while different levels of noise are injected into the system. Using this data, the robustness of the control-based continuation algorithm and its ability to captu…
▽ More
In this study, we consider the experimentally-obtained, periodically-forced response of a nonlinear structure in the presence of process noise. Control-based continuation is used to measure both the stable and unstable periodic solutions while different levels of noise are injected into the system. Using this data, the robustness of the control-based continuation algorithm and its ability to capture the noise-free system response is assessed by identifying the parameters of an associated Duffing-like model. We demonstrate that control-based continuation extracts system information more robustly, in the presence of a high level of noise, than open-loop parameter sweeps and so is a valuable tool for investigating nonlinear structures.
△ Less
Submitted 15 February, 2021; v1 submitted 29 January, 2020;
originally announced January 2020.
-
Learning to Live Life on the Edge: Online Learning for Data-Efficient Tactile Contour Following
Authors:
Elizabeth A. Stone,
Nathan F. Lepora,
David A. W. Barton
Abstract:
Tactile sensing has been used for a variety of robotic exploration and manipulation tasks but a common constraint is a requirement for a large amount of training data. This paper addresses the issue of data-efficiency by proposing a novel method for online learning based on a Gaussian Process Latent Variable Model (GP-LVM), whereby the robot learns from tactile data whilst performing a contour fol…
▽ More
Tactile sensing has been used for a variety of robotic exploration and manipulation tasks but a common constraint is a requirement for a large amount of training data. This paper addresses the issue of data-efficiency by proposing a novel method for online learning based on a Gaussian Process Latent Variable Model (GP-LVM), whereby the robot learns from tactile data whilst performing a contour following task thus enabling generalisation to a wide variety of tactile stimuli. The results show that contour following is successful with comparatively little data and is robust to novel stimuli. This work highlights that even with a simple learning architecture there are significant advantages to be gained in efficient and robust task performance by using latent variable models and online learning for tactile sensing tasks. This paves the way for a new generation of robust, fast, and data-efficient tactile systems.
△ Less
Submitted 12 August, 2020; v1 submitted 12 September, 2019;
originally announced September 2019.
-
Monitoring the low do** regime in graphene using Raman 2D peak-splits: Comparison of gated Raman and transport measurements
Authors:
Zhuofa Chen,
Nathan Ullberg,
Mounika Vutukuru,
David Barton,
Anna K Swan
Abstract:
Avoiding charge density fluctuations and impurities in graphene is vital for high-quality graphene-based devices. Traditional characterization methods require device fabrication and electrical transport measurements, which are labor-intensive and time-consuming. Existing optical methods using Raman spectroscopy only work for do** levels higher than ~10^12 cm^-2. Here, we propose an optical metho…
▽ More
Avoiding charge density fluctuations and impurities in graphene is vital for high-quality graphene-based devices. Traditional characterization methods require device fabrication and electrical transport measurements, which are labor-intensive and time-consuming. Existing optical methods using Raman spectroscopy only work for do** levels higher than ~10^12 cm^-2. Here, we propose an optical method using Raman 2D peak-splitting (split between the Raman 2D1 and 2D2 peaks at low do** levels). Electrostatically gated Raman measurements combined with transport measurements were used to correlate the 2D peak-split with the charge density on graphene with high precision (2x10^10 cm^-2 per 2D peak-split wavenumber). We found that the Raman 2D peak-split has a strong correlation with the charge density at low do** levels, and that a lower charge density results in a larger 2D peak-split. Our work provides a simple and non-invasive optical method to quantify the do** level of graphene from 10^10 cm^-2 to 10^12 cm^-2, two orders of magnitude higher precision than previously reported optical methods. This method provides a platform for estimating the do** level and quality of graphene before fabricating graphene devices
△ Less
Submitted 28 August, 2019;
originally announced August 2019.
-
Shear-invariant Sliding Contact Perception with a Soft Tactile Sensor
Authors:
Kirsty Aquilina,
David A. W. Barton,
Nathan F. Lepora
Abstract:
Manipulation tasks often require robots to be continuously in contact with an object. Therefore tactile perception systems need to handle continuous contact data. Shear deformation causes the tactile sensor to output path-dependent readings in contrast to discrete contact readings. As such, in some continuous-contact tasks, sliding can be regarded as a disturbance over the sensor signal. Here we p…
▽ More
Manipulation tasks often require robots to be continuously in contact with an object. Therefore tactile perception systems need to handle continuous contact data. Shear deformation causes the tactile sensor to output path-dependent readings in contrast to discrete contact readings. As such, in some continuous-contact tasks, sliding can be regarded as a disturbance over the sensor signal. Here we present a shear-invariant perception method based on principal component analysis (PCA) which outputs the required information about the environment despite sliding motion. A compliant tactile sensor (the TacTip) is used to investigate continuous tactile contact. First, we evaluate the method offline using test data collected whilst the sensor slides over an edge. Then, the method is used within a contour-following task applied to 6 objects with varying curvatures; all contours are successfully traced. The method demonstrates generalisation capabilities and could underlie a more sophisticated controller for challenging manipulation or exploration tasks in unstructured environments. A video showing the work described in the paper can be found at https://youtu.be/wrTM61-pieU
△ Less
Submitted 2 May, 2019;
originally announced May 2019.
-
Numerical Continuation in Nonlinear Experiments using Local Gaussian Process Regression
Authors:
L. Renson,
J. Sieber,
D. A. W. Barton,
A. D. Shaw,
S. A. Neild
Abstract:
Control-based continuation (CBC) is a general and systematic method to probe the dynamics of nonlinear experiments. In this paper, CBC is combined with a novel continuation algorithm that is robust to experimental noise and enables the tracking of geometric features of the response surface such as folds. The method uses Gaussian process regression to create a local model of the response surface on…
▽ More
Control-based continuation (CBC) is a general and systematic method to probe the dynamics of nonlinear experiments. In this paper, CBC is combined with a novel continuation algorithm that is robust to experimental noise and enables the tracking of geometric features of the response surface such as folds. The method uses Gaussian process regression to create a local model of the response surface on which standard numerical continuation algorithms can be applied. The local model evolves as continuation explores the experimental parameter space, exploiting previously captured data to actively select the next data points to collect such that they maximise the potential information gain about the feature of interest. The method is demonstrated experimentally on a nonlinear structure featuring harmonically-coupled modes. Fold points present in the response surface of the system are followed and reveal the presence of an isola, i.e. a branch of periodic responses detached from the main resonance peak.
△ Less
Submitted 9 May, 2019; v1 submitted 21 January, 2019;
originally announced January 2019.
-
Application of control-based continuation to a nonlinear structure with harmonically coupled modes
Authors:
L. Renson,
A. D. Shaw,
D. A. W. Barton,
S. A. Neild
Abstract:
This paper presents a systematic method for exploring the nonlinear dynamics of multi-degree-of-freedom (MDOF) physical experiments. To illustrate the power of this method, known as control-based continuation (CBC), it is applied to a nonlinear beam structure that exhibits a strong 3:1 modal coupling between its first two bending modes. CBC is able to extract a range of dynamical features, includi…
▽ More
This paper presents a systematic method for exploring the nonlinear dynamics of multi-degree-of-freedom (MDOF) physical experiments. To illustrate the power of this method, known as control-based continuation (CBC), it is applied to a nonlinear beam structure that exhibits a strong 3:1 modal coupling between its first two bending modes. CBC is able to extract a range of dynamical features, including an isola, directly from the experiment without recourse to model fitting or other indirect data-processing methods.
Previously, CBC has only been applied to (essentially) single-degree-of-freedom experiments; in this paper we show that the required feedback-control methods and path-following techniques can equally be applied to MDOF systems. A low-level broadband excitation is initially applied to the experiment to obtain the requisite information for controller design and, subsequently, the physical experiment is treated as a `black box' that is probed using CBC. The invasiveness of the controller used is analysed and experimental results are validated with open-loop measurements. Good agreement between open- and closed-loop results is achieved, though it is found that care needs to be taken in dealing with the presence of higher-harmonics in the force applied to the structure.
△ Less
Submitted 12 July, 2018;
originally announced August 2018.
-
Principal Components of Touch
Authors:
Kirsty Aquilina,
David A. W. Barton,
Nathan F. Lepora
Abstract:
Our human sense of touch enables us to manipulate our surroundings; therefore, complex robotic manipulation will require artificial tactile sensing. Typically tactile sensor arrays are used in robotics, implying that a straightforward way of interpreting multidimensional data is required. In this paper we present a simple visualisation approach based on applying principal component analysis (PCA)…
▽ More
Our human sense of touch enables us to manipulate our surroundings; therefore, complex robotic manipulation will require artificial tactile sensing. Typically tactile sensor arrays are used in robotics, implying that a straightforward way of interpreting multidimensional data is required. In this paper we present a simple visualisation approach based on applying principal component analysis (PCA) to systematically collected sets of tactile data. We apply the visualisation approach to 4 different types of tactile sensor, encompassing fingertips and vibrissal arrays. The results show that PCA can reveal structure and regularities in the tactile data, which also permits the use of simple classifiers such as $k$-NN to achieve good inference. Additionally, the Euclidean distance in principal component space gives a measure of sensitivity, which can aid visualisation and also be used to find regions in the tactile input space where the sensor is able to perceive with higher accuracy. We expect that these observations will generalise, and thus offer the potential for novel control methods based on touch.
△ Less
Submitted 8 June, 2018; v1 submitted 21 May, 2018;
originally announced May 2018.
-
Force appropriation of nonlinear structures
Authors:
L. Renson,
T. L. Hill,
D. A. Ehrhardt,
D. A. W. Barton,
S. A. Neild
Abstract:
Nonlinear normal modes (NNMs) are widely used as a tool for develo** mathematical models of nonlinear structures and understanding their dynamics. NNMs can be identified experimentally through a phase quadrature condition between the system response and the applied excitation. This paper demonstrates that this commonly-used quadrature condition can give results that are significantly different f…
▽ More
Nonlinear normal modes (NNMs) are widely used as a tool for develo** mathematical models of nonlinear structures and understanding their dynamics. NNMs can be identified experimentally through a phase quadrature condition between the system response and the applied excitation. This paper demonstrates that this commonly-used quadrature condition can give results that are significantly different from the true NNM, in particular when the excitation applied to the system is limited to one input force, as is frequently used in practice. The system studied is a clamped-clamped cross beam with two closely-spaced modes. This paper shows that the regions where the quadrature condition is (in)accurate can be qualitatively captured by analysing transfer of energy between the modes of the system, leading to a discussion of the appropriate number of input forces and their locations across the structure.
△ Less
Submitted 2 January, 2018;
originally announced January 2018.
-
Broadband and Wide-Angle Nonreciprocity with a Nonhermitian Metamaterial
Authors:
David Barton III,
Mark Lawrence,
Hadiseh Alaeian,
Jennifer Dionne
Abstract:
We theoretically demonstrate a non-hermitian metamaterial exhibiting broadband and wide-angle nonreciprocity. The metamaterial consists of planar metal-dielectric layers with a Parity-Time (PT) symmetric distrubtion of loss and gain. With increasing loss and gain, the bandstructure and bandgap are strongly modified; further, the PT potential leads to distinct internal field distributions when illu…
▽ More
We theoretically demonstrate a non-hermitian metamaterial exhibiting broadband and wide-angle nonreciprocity. The metamaterial consists of planar metal-dielectric layers with a Parity-Time (PT) symmetric distrubtion of loss and gain. With increasing loss and gain, the bandstructure and bandgap are strongly modified; further, the PT potential leads to distinct internal field distributions when illuminated from different sides. Including nonlinearities arising from natural loss and gain saturation leads to nonreciprocal transmission in the visible over a 50 nm wavelength and 60$^{\circ}$ degree angular range.
△ Less
Submitted 14 December, 2017;
originally announced December 2017.
-
Active Polarization Control with a Parity-Time Symmetric Plasmonic Resonator
Authors:
Brian Baum,
Mark Lawrence,
David Barton,
Hadiseh Alaeian,
Jennifer Dionne
Abstract:
Control of the polarization state of light is essential for many technologies, but is often limited by weak light-matter interactions that necessitate long device path lengths or significantly reduce the signal intensity. Here, we investigate a nanoscale plasmonic aperture capable of modifying the polarization state of far-field transmitted light without loss in the probe signal. The aperture is a…
▽ More
Control of the polarization state of light is essential for many technologies, but is often limited by weak light-matter interactions that necessitate long device path lengths or significantly reduce the signal intensity. Here, we investigate a nanoscale plasmonic aperture capable of modifying the polarization state of far-field transmitted light without loss in the probe signal. The aperture is a coaxial resonator consisting of a dielectric ring embedded within a metallic film; parity-time ($\mathcal{PT}$) symmetric inclusions of loss and gain within the dielectric ring enable polarization control. Since the coaxial aperture enables near-thresholdless $\mathcal{PT}$ symmetry breaking, polarization control is achieved with realistic levels of loss and gain. Exploiting this sensitivity, we show that the aperture can function as a tunable waveplate, with the transmitted ellipticity of circularly polarized incident light changing continuously with the dissipation coefficient from $π/2$ to 0 (i.e. linear polarization). Rotation of linearly polarized light with unity efficiency is also possible, with a continuously-tunable degree of rotation. This compact, low-threshold, and reconfigurable polarizer may enable next-generation, high-efficiency displays, routers, modulators, and metasurfaces.
△ Less
Submitted 17 May, 2018; v1 submitted 14 December, 2017;
originally announced December 2017.
-
Active Vertex Model for Cell-Resolution Description of Epithelial Tissue Mechanics
Authors:
Daniel L. Barton,
Silke Henkes,
Cornelis J. Weijer,
Rastko Sknepnek
Abstract:
We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patter…
▽ More
We introduce an Active Vertex Model (AVM) for cell-resolution studies of the mechanics of confluent epithelial tissues consisting of tens of thousands of cells, with a level of detail inaccessible to similar methods. The AVM combines the Vertex Model for confluent epithelial tissues with active matter dynamics. This introduces a natural description of the cell motion and accounts for motion patterns observed on multiple scales. Furthermore, cell contacts are generated dynamically from positions of cell centres. This not only enables efficient numerical implementation, but provides a natural description of the T1 transition events responsible for local tissue rearrangements. The AVM also includes cell alignment, cell-specific mechanical properties, cell growth, division and apoptosis. In addition, the AVM introduces a flexible, dynamically changing boundary of the epithelial sheet allowing for studies of phenomena such as the fingering instability or wound healing. We illustrate these capabilities with a number of case studies.
△ Less
Submitted 18 December, 2016;
originally announced December 2016.
-
Participant and spectator scaling of spectator fragments in Au+Au and Cu+Cu collisions at sqrt(sNN) = 19.6 and 22.4 GeV
Authors:
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
A. A. Bickley,
R. Bindel,
A. Budzanowski,
W. Busza,
A. Carroll,
Z. Chai,
V. Chetluru,
M. P. Decowski,
E. Garcia,
T. Gburek,
N. George,
K. Gulbrandsen,
S. Gushue,
C. Halliwell,
J. Hamblen,
I. Harnarine,
G. A. Heintzelman,
C. Henderson,
D. J. Hofman
, et al. (57 additional authors not shown)
Abstract:
Spectator fragments resulting from relativistic heavy ion collisions, consisting of single protons and neutrons along with groups of stable nuclear fragments up to Nitrogen (Z=7), are measured in PHOBOS. These fragments are observed in Au+Au (sqrt(sNN)=19.6 GeV) and Cu+Cu (22.4 GeV) collisions at high pseudorapidity ($η$). The dominant multiply-charged fragment is the tightly bound Helium ($α$), w…
▽ More
Spectator fragments resulting from relativistic heavy ion collisions, consisting of single protons and neutrons along with groups of stable nuclear fragments up to Nitrogen (Z=7), are measured in PHOBOS. These fragments are observed in Au+Au (sqrt(sNN)=19.6 GeV) and Cu+Cu (22.4 GeV) collisions at high pseudorapidity ($η$). The dominant multiply-charged fragment is the tightly bound Helium ($α$), with Lithium, Beryllium, and Boron all clearly seen as a function of collision centrality and pseudorapidity. We observe that in Cu+Cu collisions, it becomes much more favorable for the $α$ fragments to be released than Lithium. The yields of fragments approximately scale with the number of spectator nucleons, independent of the colliding ion. The shapes of the pseudorapidity distributions of fragments indicate that the average deflection of the fragments away from the beam direction increases for more central collisions. A detailed comparison of the shapes for $α$ and Lithium fragments indicates that the centrality dependence of the deflections favors a scaling with the number of participants in the collision.
△ Less
Submitted 24 November, 2015;
originally announced November 2015.
-
Control-based continuation: bifurcation and stability analysis for physical experiments
Authors:
David A. W. Barton
Abstract:
Control-based continuation is technique for tracking the solutions and bifurcations of nonlinear experiments. The basic idea is to apply the method of numerical continuation to a feedback-controlled physical experiment. Since in an experiment it is not (generally) possible to set the state of the system directly, the control target is used as a proxy for the state. The challenge then becomes to de…
▽ More
Control-based continuation is technique for tracking the solutions and bifurcations of nonlinear experiments. The basic idea is to apply the method of numerical continuation to a feedback-controlled physical experiment. Since in an experiment it is not (generally) possible to set the state of the system directly, the control target is used as a proxy for the state. The challenge then becomes to determine a control target such that the control is non-invasive, that is, it stabilises a steady-state (or periodic orbit) of the original open-loop experiment without altering it otherwise.
Once implemented, control-based continuation enables the systematic investigation of the bifurcation structure of a physical system, much like if it was numerical model. However, stability information (and hence bifurcation detection and classification) is not readily available due to the presence of stabilising feedback control. This paper uses methods from the system identification community to extract stability information in the form of Floquet multipliers from the closed-loop experiment, thus enabling the direct detection of bifurcations. In particular, it is shown that a periodic auto-regressive model with exogenous inputs (ARX) can be constructed that approximates the time-varying linearisation of the experiment around a particular periodic orbit. This method is demonstrated using a physical nonlinear tuned mass damper.
△ Less
Submitted 22 December, 2015; v1 submitted 12 June, 2015;
originally announced June 2015.
-
Nucleon-Gold Collisions at 200 AGeV Using Tagged d+Au Interactions in PHOBOS
Authors:
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
B. Becker,
R. R. Betts,
A. A. Bickley,
R. Bindel,
W. Busza,
A. Carroll,
M. P. Decowski,
E. García,
T. Gburek,
N. George,
K. Gulbrandsen,
S. Gushue,
C. Halliwell,
J. Hamblen,
A. S. Harrington,
C. Henderson,
D. J. Hofman,
R. S. Hollis,
R. Hołyński,
B. Holzman,
A. Iordanova
, et al. (36 additional authors not shown)
Abstract:
Forward calorimetry in the PHOBOS detector has been used to study charged hadron production in d+Au, p+Au and n+Au collisions at sqrt(s_nn) = 200 GeV. The forward proton calorimeter detectors are described and a procedure for determining collision centrality with these detectors is detailed. The deposition of energy by deuteron spectator nucleons in the forward calorimeters is used to identify p+A…
▽ More
Forward calorimetry in the PHOBOS detector has been used to study charged hadron production in d+Au, p+Au and n+Au collisions at sqrt(s_nn) = 200 GeV. The forward proton calorimeter detectors are described and a procedure for determining collision centrality with these detectors is detailed. The deposition of energy by deuteron spectator nucleons in the forward calorimeters is used to identify p+Au and n+Au collisions in the data. A weighted combination of the yield of p+Au and n+Au is constructed to build a reference for Au+Au collisions that better matches the isospin composition of the gold nucleus. The p_T and centrality dependence of the yield of this improved reference system is found to match that of d+Au. The shape of the charged particle transverse momentum distribution is observed to extrapolate smoothly from pbar+p to central d+Au as a function of the charged particle pseudorapidity density. The asymmetry of positively- and negatively-charged hadron production in p+Au is compared to that of n+Au. No significant asymmetry is observed at mid-rapidity. These studies augment recent results from experiments at the LHC and RHIC facilities to give a more complete description of particle production in p+A and d+A collisions, essential for the understanding the medium produced in high energy nucleus-nucleus collisions.
△ Less
Submitted 25 May, 2015;
originally announced May 2015.
-
Analytical Modelling of the Spread of Disease in Confined and Crowded Spaces
Authors:
Lara Goscé,
David A W Barton,
Anders Johansson
Abstract:
Since 1927, until recently, models describing the spread of disease have mostly been of the SIR-compartmental type, based on the assumption that populations are homogeneous and well-mixed. The focus of these models have typically been on large-scale analysis of scenarios such as cities, nations or even world scale. SIR models are appealing because of their simplicity, but their parameters, especia…
▽ More
Since 1927, until recently, models describing the spread of disease have mostly been of the SIR-compartmental type, based on the assumption that populations are homogeneous and well-mixed. The focus of these models have typically been on large-scale analysis of scenarios such as cities, nations or even world scale. SIR models are appealing because of their simplicity, but their parameters, especially the transmission rate, are complex and depend on a number of factors, which makes it hard to predict how a change of a single environmental, demographic, or epidemiological factor will affect the population. Therefore, in this contribution we start to unpick the transmission-rate parameter. Analysing the implications that arise when taking crowd behaviour explicitly into account, we show how both the rate of infection as well as the walking speed depend on the local crowd density around an infected individual. The combined effect is that the rate of infection at a population scale has an analytically tractable non-linear dependency on crowd density. We model the spread of a hypothetical disease in a corridor and compare our new model with a typical compartmental model, which highlights the regime in which current models may not produce credible results.
△ Less
Submitted 21 July, 2014; v1 submitted 15 August, 2013;
originally announced August 2013.
-
Systematic experimental exploration of bifurcations with non-invasive control
Authors:
David A. W. Barton,
Jan Sieber
Abstract:
We present a general method for systematically investigating the dynamics and bifurcations of a physical nonlinear experiment. In particular, we show how the odd-number limitation inherent in popular non-invasive control schemes, such as (Pyragas) time-delayed or washout-filtered feedback control, can be overcome for tracking equilibria or forced periodic orbits in experiments. To demonstrate the…
▽ More
We present a general method for systematically investigating the dynamics and bifurcations of a physical nonlinear experiment. In particular, we show how the odd-number limitation inherent in popular non-invasive control schemes, such as (Pyragas) time-delayed or washout-filtered feedback control, can be overcome for tracking equilibria or forced periodic orbits in experiments. To demonstrate the use of our non-invasive control, we trace out experimentally the resonance surface of a periodically forced mechanical nonlinear oscillator near the onset of instability, around two saddle-node bifurcations (folds) and a cusp bifurcation.
△ Less
Submitted 15 March, 2013; v1 submitted 17 September, 2012;
originally announced September 2012.
-
Phobos results on charged particle multiplicity and pseudorapidity distributions in Au+Au, Cu+Cu, d+Au, and p+p collisions at ultra-relativistic energies
Authors:
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
A. A. Bickley,
R. Bindel,
A. Budzanowski,
W. Busza,
A. Carroll,
Z. Chai,
V. Chetluru,
M. P. Decowski,
E. Garcıa,
T. Gburek,
N. George,
K. Gulbrandsen,
S. Gushue,
C. Halliwell,
J. Hamblen,
G. A. Heintzelman,
C. Henderson,
D. J. Hofman,
R. S. Hollis
, et al. (54 additional authors not shown)
Abstract:
Pseudorapidity distributions of charged particles emitted in $Au+Au$, $Cu+Cu$, $d+Au$, and $p+p$ collisions over a wide energy range have been measured using the PHOBOS detector at RHIC. The centrality dependence of both the charged particle distributions and the multiplicity at midrapidity were measured. Pseudorapidity distributions of charged particles emitted with $|η|<5.4$, which account for b…
▽ More
Pseudorapidity distributions of charged particles emitted in $Au+Au$, $Cu+Cu$, $d+Au$, and $p+p$ collisions over a wide energy range have been measured using the PHOBOS detector at RHIC. The centrality dependence of both the charged particle distributions and the multiplicity at midrapidity were measured. Pseudorapidity distributions of charged particles emitted with $|η|<5.4$, which account for between 95% and 99% of the total charged-particle emission associated with collision participants, are presented for different collision centralities. Both the midrapidity density, $dN_{ch}/dη$, and the total charged-particle multiplicity, $N_{ch}$, are found to factorize into a product of independent functions of collision energy, $\sqrt{s_{_{NN}}}$, and centrality given in terms of the number of nucleons participating in the collision, $N_{part}$. The total charged particle multiplicity, observed in these experiments and those at lower energies, assumes a linear dependence of $(\ln s_{_{NN}})^2$ over the full range of collision energy of $\sqrt{s_{_{NN}}}$=2.7-200 GeV.
△ Less
Submitted 8 November, 2010;
originally announced November 2010.
-
A benign, low Z electron capture agent for negative ion TPCs
Authors:
C. J. Martoff,
M. P. Dion,
M. Hosack,
D. Barton,
J. K. Black
Abstract:
We have identified nitromethane (CH$_3$NO$_2$) as an effective electron capture agent for negative ion TPCs (NITPCs).
We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent.
Not only is nitromethane substantially more benign than the only other identified capture agent, CS$_2$, but its low atomic number will ena…
▽ More
We have identified nitromethane (CH$_3$NO$_2$) as an effective electron capture agent for negative ion TPCs (NITPCs).
We present drift velocity and longitudinal diffusion measurements for negative ion gas mixtures using nitromethane as the capture agent.
Not only is nitromethane substantially more benign than the only other identified capture agent, CS$_2$, but its low atomic number will enable the use of the NITPC as a photoelectric X{}-ray polarimeter in the 1{}-10 keV band.
△ Less
Submitted 20 August, 2009;
originally announced August 2009.
-
Scaling properties in bulk and p$_{\rm T}$-dependent particle production near midrapidity in relativistic heavy ion collisions
Authors:
PHOBOS Collaboration,
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
R. Bindel,
W. Busza,
Z. Chai,
V. Chetluru,
E. Garcia,
T. Gburek,
K. Gulbrandsen,
J. Hamblen,
I. Harnarine,
C. Henderson,
D. J. Hofman,
R. S. Hollis,
R. Holynski,
B. Holzman,
A. Iordanova,
J. L. Kane,
P. Kulinich,
C. M. Kuo
, et al. (34 additional authors not shown)
Abstract:
The centrality dependence of the midrapidity charged-particle multiplicity density ($|η|$$<$1) is presented for Au+Au and Cu+Cu collisions at RHIC over a broad range of collision energies. The multiplicity measured in the Cu+Cu system is found to be similar to that measured in the Au+Au system, for an equivalent N$_{\rm part}$, with the observed factorization in energy and centrality still persi…
▽ More
The centrality dependence of the midrapidity charged-particle multiplicity density ($|η|$$<$1) is presented for Au+Au and Cu+Cu collisions at RHIC over a broad range of collision energies. The multiplicity measured in the Cu+Cu system is found to be similar to that measured in the Au+Au system, for an equivalent N$_{\rm part}$, with the observed factorization in energy and centrality still persistent in the smaller Cu+Cu system. The extent of the similarities observed for bulk particle production is tested by a comparative analysis of the inclusive transverse momentum distributions for Au+Au and Cu+Cu collisions near midrapidity. It is found that, within the uncertainties of the data, the ratio of yields between the various energies for both Au+Au and Cu+Cu systems are similar and constant with centrality, both in the bulk yields as well as a function of p$_{\rm T}$, up to at least 4 GeV/$c$. The effects of multiple nucleon collisions that strongly increase with centrality and energy appear to only play a minor role in bulk and intermediate transverse momentum particle production.
△ Less
Submitted 13 August, 2008;
originally announced August 2008.
-
System size, energy, centrality and pseudorapidity dependence of charged-particle density in Au+Au and Cu+Cu collisions at RHIC
Authors:
PHOBOS Collaboration,
G. I. Veres,
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
A. A. Bickley,
R. Bindel,
W. Busza,
A. Carroll,
Z. Chai,
V. Chetluru,
M. P. Decowski,
E. García,
T. Gburek,
N. George,
K. Gulbrandsen,
C. Halliwell,
J. Hamblen,
I. Harnarine,
M. Hauer,
C. Henderson,
D. J. Hofman
, et al. (44 additional authors not shown)
Abstract:
Charged particle pseudorapidity distributions are presented from the PHOBOS experiment at RHIC, measured in Au+Au and Cu+Cu collisions at sqrt{s_NN}=19.6, 22.4, 62.4, 130 and 200 GeV, as a function of collision centrality. The presentation includes the recently analyzed Cu+Cu data at 22.4 GeV. The measurements were made by the same detector setup over a broad range in pseudorapidity, |eta|<5.4,…
▽ More
Charged particle pseudorapidity distributions are presented from the PHOBOS experiment at RHIC, measured in Au+Au and Cu+Cu collisions at sqrt{s_NN}=19.6, 22.4, 62.4, 130 and 200 GeV, as a function of collision centrality. The presentation includes the recently analyzed Cu+Cu data at 22.4 GeV. The measurements were made by the same detector setup over a broad range in pseudorapidity, |eta|<5.4, allowing for a reliable systematic study of particle production as a function of energy, centrality and system size. Comparing Cu+Cu and Au+Au results, we find that the total number of produced charged particles and the overall shape (height and width) of the pseudorapidity distributions are determined by the number of nucleon participants, N_part. Detailed comparisons reveal that the matching of the shape of the Cu+Cu and Au+Au pseudorapidity distributions over the full range of eta is better for the same N_part/2A value than for the same N_part value, where A denotes the mass number. In other words, it is the geometry of the nuclear overlap zone, rather than just the number of nucleon participants that drives the detailed shape of the pseudorapidity distribution and its centrality dependence.
△ Less
Submitted 17 June, 2008;
originally announced June 2008.
-
Non-flow correlations and elliptic flow fluctuations in Au+Au collisions at sqrt(s_NN)=200GeV
Authors:
PHOBOS Collaboration,
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
A. A. Bickley,
R. Bindel,
W. Busza,
A. Carroll,
Z. Chai,
V. Chetluru,
M. P. Decowski,
E. Garcia,
T. Gburek,
N. George,
K. Gulbrandsen,
C. Halliwell,
J. Hamblen,
I. Harnarine,
M. Hauer,
C. Henderson,
D. J. Hofman,
R. S. Hollis
, et al. (44 additional authors not shown)
Abstract:
We present first results on event-by-event elliptic flow fluctuations in nucleus-nucleus collisions corrected for effects of non-flow correlations where the magnitude of non-flow correlations has been independently measured in data. Over the measured range in centrality, we see large relative fluctuations of 25-50%. The results are consistent with predictions from both color glass condensate and…
▽ More
We present first results on event-by-event elliptic flow fluctuations in nucleus-nucleus collisions corrected for effects of non-flow correlations where the magnitude of non-flow correlations has been independently measured in data. Over the measured range in centrality, we see large relative fluctuations of 25-50%. The results are consistent with predictions from both color glass condensate and Glauber type initial condition calculations of the event-by-event participant eccentricity fluctuations.
△ Less
Submitted 27 April, 2008;
originally announced April 2008.
-
The Importance of Correlations and Fluctuations on the Initial Source Eccentricity in High-Energy Nucleus-Nucleus Collisions
Authors:
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
R. Bindel,
W. Busza,
V. Chetluru,
E. García,
T. Gburek,
J. Hamblen,
U. Heinz,
D. J. Hofman,
R. S. Hollis,
A. Iordanova,
W. Li,
C. Loizides,
S. Manly,
A. C. Mignerey,
R. Nouicer,
A. Olszewski,
C. Reed,
C. Roland,
G. Roland
, et al. (14 additional authors not shown)
Abstract:
In this paper, we investigate various ways of defining the initial source eccentricity using the Monte Carlo Glauber (MCG) approach. In particular, we examine the participant eccentricity, which quantifies the eccentricity of the initial source shape by the major axes of the ellipse formed by the interaction points of the participating nucleons. We show that reasonable variation of the density p…
▽ More
In this paper, we investigate various ways of defining the initial source eccentricity using the Monte Carlo Glauber (MCG) approach. In particular, we examine the participant eccentricity, which quantifies the eccentricity of the initial source shape by the major axes of the ellipse formed by the interaction points of the participating nucleons. We show that reasonable variation of the density parameters in the Glauber calculation, as well as variations in how matter production is modeled, do not significantly modify the already established behavior of the participant eccentricity as a function of collision centrality. Focusing on event-by-event fluctuations and correlations of the distributions of participating nucleons we demonstrate that, depending on the achieved event-plane resolution, fluctuations in the elliptic flow magnitude $v_2$ lead to most measurements being sensitive to the root-mean-square, rather than the mean of the $v_2$ distribution. Neglecting correlations among participants, we derive analytical expressions for the participant eccentricity cumulants as a function of the number of participating nucleons, $\Npart$,kee** non-negligible contributions up to $\ordof{1/\Npart^3}$. We find that the derived expressions yield the same results as obtained from mixed-event MCG calculations which remove the correlations stemming from the nuclear collision process. Most importantly, we conclude from the comparison with MCG calculations that the fourth order participant eccentricity cumulant does not approach the spatial anisotropy obtained assuming a smooth nuclear matter distribution. In particular, for the Cu+Cu system, these quantities deviate from each other by almost a factor of two over a wide range in centrality.
△ Less
Submitted 23 November, 2007;
originally announced November 2007.
-
System Size, Energy and Centrality Dependence of Pseudorapidity Distributions of Charged Particles in Relativistic Heavy Ion Collisions
Authors:
B. Alver,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
R. Bindel,
W. Busza,
Z. Chai,
V. Chetluru,
E. García,
T. Gburek,
K. Gulbrandsen,
J. Hamblen,
I. Harnarine,
C. Henderson,
D. J. Hofman,
R. S. Hollis,
R. Hołyński,
B. Holzman,
A. Iordanova,
J. L. Kane,
P. Kulinich,
C. M. Kuo,
W. Li
, et al. (33 additional authors not shown)
Abstract:
We present the first measurements of the pseudorapidity distribution of primary charged particles in Cu+Cu collisions as a function of collision centrality and energy, \sqrtsnn = 22.4, 62.4 and 200 GeV, over a wide range of pseudorapidity, using the PHOBOS detector. Making a global comparison of Cu+Cu and Au+Au results, we find that the total number of produced charged particles and the rough sh…
▽ More
We present the first measurements of the pseudorapidity distribution of primary charged particles in Cu+Cu collisions as a function of collision centrality and energy, \sqrtsnn = 22.4, 62.4 and 200 GeV, over a wide range of pseudorapidity, using the PHOBOS detector. Making a global comparison of Cu+Cu and Au+Au results, we find that the total number of produced charged particles and the rough shape (height and width) of the pseudorapidity distributions are determined by the number of nucleon participants. More detailed studies reveal that a more precise matching of the shape of the Cu+Cu and Au+Au pseudorapidity distributions over the full range of pseudorapidity occurs for the same Npart/2A value rather than the same Npart value. In other words, it is the collision geometry rather than just the number of nucleon participants that drives the detailed shape of the pseudorapidity distribution and its centrality dependence at RHIC energies.
△ Less
Submitted 25 September, 2007;
originally announced September 2007.
-
Identified hadron transverse momentum spectra in Au+Au collisions at sqrt(s_(NN))=62.4 GeV
Authors:
PHOBOS Collaboration,
B. B. Back,
M. D. Baker,
M. Ballintijn,
D. S. Barton,
R. R. Betts,
A. A. Bickley,
R. Bindel,
W. Busza,
A. Carroll,
Z. Chai,
M. P. Decowski,
E. Garcia,
T. Gburek,
N. George,
K. Gulbrandsen,
C. Halliwell,
J. Hamblen,
M. Hauer,
C. Henderson,
D. J. Hofman,
R. S. Hollis,
R. Holynski,
B. Holzman,
A. Iordanova
, et al. (34 additional authors not shown)
Abstract:
Transverse momentum spectra of pions, kaons, protons and antiprotons from Au+Au collisions at sqrt(s_(NN)) = 62.4 GeV have been measured by the PHOBOS experiment at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory. The identification of particles relies on three different methods: low momentum particles stop** in the first detector layers; the specific energy loss (dE/dx)…
▽ More
Transverse momentum spectra of pions, kaons, protons and antiprotons from Au+Au collisions at sqrt(s_(NN)) = 62.4 GeV have been measured by the PHOBOS experiment at the Relativistic Heavy Ion Collider at Brookhaven National Laboratory. The identification of particles relies on three different methods: low momentum particles stop** in the first detector layers; the specific energy loss (dE/dx) in the silicon Spectrometer, and Time-of-Flight measurement. These methods cover the transverse momentum ranges 0.03-0.2, 0.2-1.0 and 0.5-3.0 GeV/c, respectively. Baryons are found to have substantially harder transverse momentum spectra than mesons. The pT region in which the proton to pion ratio reaches unity in central Au+Au collisions at sqrt(s_(NN)) = 62.4 GeV fits into a smooth trend as a function of collision energy. At low transverse momenta, the spectra exhibit a significant deviation from transverse mass scaling, and when the observed particle yields at very low pT are compared to extrapolations from higher pT, no significant excess is found. By comparing our results to Au+Au collisions at sqrt(s_(NN)) = 200 GeV, we conclude that the net proton yield at midrapidity is proportional to the number of participant nucleons in the collision.
△ Less
Submitted 30 September, 2006;
originally announced October 2006.
-
Nuclear Transparency in 90 Degree c.m. Quasielastic A(p,2p) Reactions
Authors:
J. Aclander,
J. Alster,
G. Asryan,
Y. Averiche,
D. S. Barton,
V. Baturin,
N. Buktoyarova,
G. Bunce,
A. S. Carroll,
N. Christensen,
H. Courant,
S. Durrant,
G. Fang,
K. Gabriel,
S. Gushue,
K. J. Heller,
S. Heppelmann,
I. Kosonovsky,
A. Leksanov,
Y. I. Makdisi,
A. Malki,
I. Mardor,
Y. Mardor,
M. L. Marshak,
D. Martel
, et al. (20 additional authors not shown)
Abstract:
We summarize the results of two experimental programs at the Alternating Gradient Synchrotron of BNL to measure the nuclear transparency of nuclei measured in the A(p,2p) quasielastic scattering process near 90 Deg .in the pp center of mass. The incident momenta varied from 5.9 to 14.4 GeV/c, corresponding to 4.8 < Q^2 < 12.7 (GeV/c)^2. First, we describe the measurements with the newer experime…
▽ More
We summarize the results of two experimental programs at the Alternating Gradient Synchrotron of BNL to measure the nuclear transparency of nuclei measured in the A(p,2p) quasielastic scattering process near 90 Deg .in the pp center of mass. The incident momenta varied from 5.9 to 14.4 GeV/c, corresponding to 4.8 < Q^2 < 12.7 (GeV/c)^2. First, we describe the measurements with the newer experiment, E850, which had more complete kinematic definition of quasielastic events. In E850 the angular dependence of the nuclear transparency near 90 Deg. c.m., and the nuclear transparency for deuterons was studied. Second, we review the techniques used in an earlier experiment, E834, and show that the two experiments are consistent for the Carbon data. E834 also determines the nuclear transparencies for Li, Al, Cu, and Pb nuclei as well as for C. We find for both E850 and E834 that the A(p,2p) nuclear transparency, unlike that for A(e,e'p) nuclear transparency, is incompatible with a constant value versus energy as predicted by Glauber calculations. The A(p,2p) nuclear transparency for C and Al increases by a factor of two between 5.9 and 9.5 GeV/c incident proton momentum. At its peak the A(p,2p) nuclear transparency is about 80% of the constant A(e,e'p) nuclear transparency. Then the nuclear transparency falls back to the Glauber level again. This oscillating behavior is generally interpreted as an interplay between two components of the pN scattering amplitude; one short ranged and perturbative, and the other long ranged and strongly absorbed in the nuclear medium. We suggest a number of experiments for further studies of nuclear transparency effects.
△ Less
Submitted 25 May, 2004;
originally announced May 2004.
-
n-p Short-Range Correlations from (p,2p + n) Measurements
Authors:
A. Tang,
J. W. Watson,
J. Aclander,
J. Alster,
G. Asryan,
Y. Averichev,
D. Barton,
V. Baturin,
N. Bukhtoyarova,
A. Carroll,
S. Heppelmann,
A. Leksanov,
Y. Makdisi,
A. Malki,
E. Minina,
I. Navon,
H. Nicholson,
A. Ogawa,
Yu. Panebratsev,
E. Piasetzky,
A. Schetkovsky,
S. Shimanskiy,
D. Zhalov
Abstract:
We studied the $^{12}$C(p,2p+n) reaction at beam momenta of 5.9, 8.0 and 9.0 GeV/c. For quasielastic (p,2p) events we reconstructed {\bf p_f} the momentum of the knocked-out proton before the reaction; {\bf p_f} was then compared (event-by-event) with {\bf p_n}, the measured, coincident neutron momentum. For $|p_n|$ > k$_F$ = 0.220 GeV/c (the Fermi momentum) a strong back-to-back directional cor…
▽ More
We studied the $^{12}$C(p,2p+n) reaction at beam momenta of 5.9, 8.0 and 9.0 GeV/c. For quasielastic (p,2p) events we reconstructed {\bf p_f} the momentum of the knocked-out proton before the reaction; {\bf p_f} was then compared (event-by-event) with {\bf p_n}, the measured, coincident neutron momentum. For $|p_n|$ > k$_F$ = 0.220 GeV/c (the Fermi momentum) a strong back-to-back directional correlation between {\bf p_f} and {\bf p_n} was observed, indicative of short-range n-p correlations. From {\bf p_n} and {\bf p_f} we constructed the distributions of c.m. and relative motion in the longitudinal direction for correlated pairs. After correcting for detection efficiency, flux attenuation and solid angle, we determined that 49 $\pm$ 13 % of events with $|p_f|$ > k_F had directionally correlated neutrons with $|p_n|$ > k$_F$. Thus short-range 2N correlations are a major source of high-momentum nucleons in nuclei.
△ Less
Submitted 5 June, 2002;
originally announced June 2002.