Showing 1–50 of 150 results for author: Barry, P

A first demonstration of active feedback control and multi-frequency imaging techniques for kinetic inductance detectors

Authors: Maclean Rouble, Graeme Smecher, Michel Adamič, Adam Anderson, Peter S. Barry, Karia Dibert, Matt Dobbs, Kyra Fichman, Joshua Montgomery

Abstract: RF-ICE is a signal processing platform for the readout of large arrays of superconducting resonators. Designed for flexibility, the system's low digital latency and ability to independently and dynamically set the frequency and amplitude of probe tones in real time has enabled previously-inaccessible views of resonator behaviour, and opened the door to novel resonator control schemes. We introduce… ▽ More RF-ICE is a signal processing platform for the readout of large arrays of superconducting resonators. Designed for flexibility, the system's low digital latency and ability to independently and dynamically set the frequency and amplitude of probe tones in real time has enabled previously-inaccessible views of resonator behaviour, and opened the door to novel resonator control schemes. We introduce a multi-frequency imaging technique, developed with RF-ICE, which allows simultaneous observation of the entire resonance bandwidth. We demonstrate the use of this technique in the examination of the response of superconducting resonators to variations in applied readout current and thermal loading. We observe that, used in conjunction with a conventional frequency sweep at sufficiently large amplitude to induce resonance bifurcation, the multi-frequency imaging technique reveals a resonator response which is not captured by the frequency sweep measurement alone. We demonstrate that equivalent resonant frequency shifts can be achieved using either thermal, optical, or readout loading, and use this equivalence to counteract a change in thermal loading by digitally modulating the readout current through a resonator. We develop and implement a proof-of-concept closed-loop negative electro-quasiparticle feedback algorithm which first sets and then maintains the resonant frequency of a lumped element kinetic inductance detector while the loading on it is varied. Although this simple implementation is not yet suitable to deploy at scale, it demonstrates the utility of this feedback technique to improve linearity while addressing amplifier distortion, resonator response non-uniformity, and crosstalk. It can be applied to kinetic inductors in non-bolometric operation, and sets the stage for future developments. △ Less

Submitted 24 June, 2024; originally announced June 2024.

Comments: 14 pages, 7 figures, appearing in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2024

Cryogenic optical beam steering for superconducting device calibration

Authors: K. Stifter, H. Magoon, A. J. Anderson, D. J. Temples, N. A. Kurinsky, C. Stoughton, I. Hernandez, A. Nuñez, K. Anyang, R. Linehan, M. R. Young, P. Barry, D. Baxter, D. Bowring, G. Cancelo, A. Chou, K. R. Dibert, E. Figueroa-Feliciano, L. Hsu, R. Khatiwada, S. D. Mork, L. Stefanazzi, N. Tabassum, S. Uemura, B. A. Young

Abstract: We have developed a calibration system based on a micro-electromechanical systems (MEMS) mirror that is capable of delivering an optical beam over a wavelength range of 180 -- 2000 nm (0.62 -- 6.89 eV) in a sub-Kelvin environment. This portable, integrated system can steer the beam over a $\sim$3 cm $\times$ 3 cm area on the surface of any sensor with a precision of $\sim$100 $μ$m, enabling charac… ▽ More We have developed a calibration system based on a micro-electromechanical systems (MEMS) mirror that is capable of delivering an optical beam over a wavelength range of 180 -- 2000 nm (0.62 -- 6.89 eV) in a sub-Kelvin environment. This portable, integrated system can steer the beam over a $\sim$3 cm $\times$ 3 cm area on the surface of any sensor with a precision of $\sim$100 $μ$m, enabling characterization of device response as a function of position. This fills a critical need in the landscape of calibration tools for sub-Kelvin devices, including those used for dark matter detection and quantum computing. These communities have a shared goal of understanding the impact of ionizing radiation on device performance, which can be pursued with our system. This paper describes the design of the first-generation calibration system and the results from successfully testing its performance at room temperature and 20 mK. △ Less

Submitted 3 May, 2024; originally announced May 2024.

Comments: 17 pages, 7 figures, submitted to SPIE

Report number: FERMILAB-PUB-24-0191-ETD-PPD

Flux coupled tunable superconducting resonator

Authors: Juliang Li, Pete Barry, Tom Cecil, Marharyta Lisovenko, Volodymyr Yefremenko, Gensheng Wang, Serhii Kruhlov, Goran Karapetrov, Clarence Chang

Abstract: We present a design and implementation of frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC-loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin film aluminum resonator consists of an interdigitated capacitor and th… ▽ More We present a design and implementation of frequency-tunable superconducting resonator. The resonance frequency tunability is achieved by flux-coupling a superconducting LC-loop to a current-biased feedline; the resulting screening current leads to a change of the kinetic inductance and shift in the resonance frequency. The thin film aluminum resonator consists of an interdigitated capacitor and thin line inductors forming a closed superconducting loop. The magnetic flux from the nearby current feedline induces Meissner shielding currents in the resonator loop leading to change in the kinetic part of the total inductance of the resonator. We demonstarte continuous frequency tuning within 160 MHz around the resonant frequency of 2.7 GHz. We show that: (1) frequency upconversion is achieved when kHz AC modulation signal is superimposed onto the DC bias resulting in sidebands to the resonator tone; (2) three-wave mixing is attained by parametrically pum** the nonlinear kinetic inductance using a strong RF pump signal in the feedline. The simple architecture is amenable to large array multiplexing and on-chip integration with other circuit components. The concept could be applied in flux magnetometers, upconverters, and parametric amplifiers operating above 4 Kelvin cryogenic temperatures when alternative high critical temperature material with high kinetic inductance is used. △ Less

Submitted 19 December, 2023; originally announced December 2023.

RF-ICE: large-scale gigahertz readout of frequency-multiplexed microwave kinetic inductance detectors

Authors: M. Rouble, G. Smecher, A. Anderson, P. S. Barry, K. Dibert, M. Dobbs, K. S. Karkare, J. Montgomery

Abstract: We present RF-ICE, a novel readout platform for microwave kinetic inductance detectors (MKIDs), optimized for use on millimeter-wavelength telescopes. The RF-ICE system extends ICE, a versatile, mature signal processing platform currently in use on telescopes around the world, into a new operational domain with MKIDs biased with gigahertz carriers. The system couples the FPGA-based ICE motherboard… ▽ More We present RF-ICE, a novel readout platform for microwave kinetic inductance detectors (MKIDs), optimized for use on millimeter-wavelength telescopes. The RF-ICE system extends ICE, a versatile, mature signal processing platform currently in use on telescopes around the world, into a new operational domain with MKIDs biased with gigahertz carriers. The system couples the FPGA-based ICE motherboard with a radio-frequency digitization daughterboard to enable direct digital synthesis from 0 to 6 GHz without the need for external mixing. The system operates two independent readout modules, each with 1024 frequency-multiplexed readout channels spaced across 500 MHz of carrier bandwidth. The system, which is under active development, is in operation with prototype detector wafers and will be deployed for the upcoming SPT-SLIM and SPT-3G+ experiments. △ Less

Submitted 11 October, 2023; originally announced October 2023.

Comments: 14 pages, 7 figures, appearing in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

Journal ref: Proc. SPIE 12190, Millimeter, Submillimeter, and Far-Infrared Detectors and Instrumentation for Astronomy XI, 1219024 (31 August 2022)

A Measurement of Gravitational Lensing of the Cosmic Microwave Background Using SPT-3G 2018 Data

Authors: Z. Pan, F. Bianchini, W. L. K. Wu, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, B. Ansarinejad, M. Archipley, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, E. Camphuis, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang , et al. (111 additional authors not shown)

Abstract: We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of th… ▽ More We present a measurement of gravitational lensing over 1500 deg$^2$ of the Southern sky using SPT-3G temperature data at 95 and 150 GHz taken in 2018. The lensing amplitude relative to a fiducial Planck 2018 $Λ$CDM cosmology is found to be $1.020\pm0.060$, excluding instrumental and astrophysical systematic uncertainties. We conduct extensive systematic and null tests to check the robustness of the lensing measurements, and report a minimum-variance combined lensing power spectrum over angular multipoles of $50<L<2000$, which we use to constrain cosmological models. When analyzed alone and jointly with primary cosmic microwave background (CMB) spectra within the $Λ$CDM model, our lensing amplitude measurements are consistent with measurements from SPT-SZ, SPTpol, ACT, and Planck. Incorporating loose priors on the baryon density and other parameters including uncertainties on a foreground bias template, we obtain a $1σ$ constraint on $σ_8 Ω_{\rm m}^{0.25}=0.595 \pm 0.026$ using the SPT-3G 2018 lensing data alone, where $σ_8$ is a common measure of the amplitude of structure today and $Ω_{\rm m}$ is the matter density parameter. Combining SPT-3G 2018 lensing measurements with baryon acoustic oscillation (BAO) data, we derive parameter constraints of $σ_8 = 0.810 \pm 0.033$, $S_8 \equiv σ_8(Ω_{\rm m}/0.3)^{0.5}= 0.836 \pm 0.039$, and Hubble constant $H_0 =68.8^{+1.3}_{-1.6}$ km s$^{-1}$ Mpc$^{-1}$. Using CMB anisotropy and lensing measurements from SPT-3G only, we provide independent constraints on the spatial curvature of $Ω_{K} = 0.014^{+0.023}_{-0.026}$ (95% C.L.) and the dark energy density of $Ω_Λ= 0.722^{+0.031}_{-0.026}$ (68% C.L.). When combining SPT-3G lensing data with SPT-3G CMB anisotropy and BAO data, we find an upper limit on the sum of the neutrino masses of $\sum m_ν< 0.30$ eV (95% C.L.). △ Less

Submitted 29 January, 2024; v1 submitted 22 August, 2023; originally announced August 2023.

Comments: Bandpower and likelihood data available at https://pole.uchicago.edu/public/data/spt3g_2018_lensing/

Journal ref: Physical Review D 108.12 (2023): 122005

Moment sequences, transformations, and Spidernet graphs

Authors: Paul Barry

Abstract: We use the link between Jacobi continued fractions and the generating functions of certain moment sequences to study some simple transformations on them. In particular, we define and study a transformation that is appropriate for the study of spidernet graphs and their moments, and the free Meixner law. We use the link between Jacobi continued fractions and the generating functions of certain moment sequences to study some simple transformations on them. In particular, we define and study a transformation that is appropriate for the study of spidernet graphs and their moments, and the free Meixner law. △ Less

Submitted 30 June, 2023; originally announced July 2023.

Comments: 13 pages

MSC Class: Primary 44A60; Secondary 05C10 05C30; 05C63; 05A15; 11B83. Primary 44A60; Secondary 05C10 05C30; 05C63; 05A15; 11B83

Strong Interaction Physics at the Luminosity Frontier with 22 GeV Electrons at Jefferson Lab

Authors: A. Accardi, P. Achenbach, D. Adhikari, A. Afanasev, C. S. Akondi, N. Akopov, M. Albaladejo, H. Albataineh, M. Albrecht, B. Almeida-Zamora, M. Amaryan, D. Androić, W. Armstrong, D. S. Armstrong, M. Arratia, J. Arrington, A. Asaturyan, A. Austregesilo, H. Avagyan, T. Averett, C. Ayerbe Gayoso, A. Bacchetta, A. B. Balantekin, N. Baltzell, L. Barion , et al. (419 additional authors not shown)

Abstract: This document presents the initial scientific case for upgrading the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) to 22 GeV. It is the result of a community effort, incorporating insights from a series of workshops conducted between March 2022 and April 2023. With a track record of over 25 years in delivering the world's most intense and precise multi-GeV electron… ▽ More This document presents the initial scientific case for upgrading the Continuous Electron Beam Accelerator Facility (CEBAF) at Jefferson Lab (JLab) to 22 GeV. It is the result of a community effort, incorporating insights from a series of workshops conducted between March 2022 and April 2023. With a track record of over 25 years in delivering the world's most intense and precise multi-GeV electron beams, CEBAF's potential for a higher energy upgrade presents a unique opportunity for an innovative nuclear physics program, which seamlessly integrates a rich historical background with a promising future. The proposed physics program encompass a diverse range of investigations centered around the nonperturbative dynamics inherent in hadron structure and the exploration of strongly interacting systems. It builds upon the exceptional capabilities of CEBAF in high-luminosity operations, the availability of existing or planned Hall equipment, and recent advancements in accelerator technology. The proposed program cover various scientific topics, including Hadron Spectroscopy, Partonic Structure and Spin, Hadronization and Transverse Momentum, Spatial Structure, Mechanical Properties, Form Factors and Emergent Hadron Mass, Hadron-Quark Transition, and Nuclear Dynamics at Extreme Conditions, as well as QCD Confinement and Fundamental Symmetries. Each topic highlights the key measurements achievable at a 22 GeV CEBAF accelerator. Furthermore, this document outlines the significant physics outcomes and unique aspects of these programs that distinguish them from other existing or planned facilities. In summary, this document provides an exciting rationale for the energy upgrade of CEBAF to 22 GeV, outlining the transformative scientific potential that lies within reach, and the remarkable opportunities it offers for advancing our understanding of hadron physics and related fundamental phenomena. △ Less

Submitted 24 August, 2023; v1 submitted 13 June, 2023; originally announced June 2023.

Comments: Updates to the list of authors; Preprint number changed from theory to experiment; Updates to sections 4 and 6, including additional figures

Report number: JLAB-PHY-23-3840

Integer sequences from elliptic curves

Authors: Paul Barry

Abstract: We indicate that given an integer coordinate point on an elliptic curve y^2+axy+by=x^3+cx^2+dx+e we can identify an integer sequence whose Hankel transform is a Somos-4 sequence, and whose Hankel determinants can be used to determine the coordinates of the multiples of this point. In reverse, given the coordinates of the multiples of an integer point on such an elliptic curve, we conjecture the fo… ▽ More We indicate that given an integer coordinate point on an elliptic curve y^2+axy+by=x^3+cx^2+dx+e we can identify an integer sequence whose Hankel transform is a Somos-4 sequence, and whose Hankel determinants can be used to determine the coordinates of the multiples of this point. In reverse, given the coordinates of the multiples of an integer point on such an elliptic curve, we conjecture the form of a continued fraction generating function that expands to give a sequence with the above properties. △ Less

Submitted 3 November, 2023; v1 submitted 8 June, 2023; originally announced June 2023.

Comments: 14 pages. Typos corrected

MSC Class: 11B83; 14H52; 11B39; 30B70

Low-loss Si-based Dielectrics for High Frequency Components of Superconducting Detectors

Authors: M. Lisovenko, Z. Pan, P. S. Barry, T. Cecil, C. L. Chang, R. Gualtieri, J. Li, V. Novosad, G. Wang, V. Yefremenko

Abstract: Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric and metal layers can cause microwave losses and degrade device performance. Optimization of the dielectric fabrication, device structure, and surface morphology c… ▽ More Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric and metal layers can cause microwave losses and degrade device performance. Optimization of the dielectric fabrication, device structure, and surface morphology can help mitigate this problem. We present the fabrication of silicon oxide and nitride thin film dielectrics. We then characterized them using Scanning Electron Microscopy, Atomic Force Microscopy, and spectrophotometry techniques. The samples were synthesized using various deposition methods, including Plasma-Enhanced Chemical Vapor Deposition and magnetron sputtering. The films morphology and structure were modified by adjusting the deposition pressure and gas flow. The resulting films were used in superconducting resonant systems consisting of planar inductors and capacitors. Measurements of the resonator properties, including their quality factor, were performed. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 4 pages, 5 figures, conference

Characterization of MKIDs for CMB observation at 220 GHz with the South Pole Telescope

Authors: Karia R. Dibert, Peter S. Barry, Adam J. Anderson, Bradford A. Benson, Thomas Cecil, Clarence L. Chang, Kyra N. Fichman, Kirit Karkare, Juliang Li, Tyler Natoli, Zhaodi Pan, Maclean Rouble, Erik Shirokoff, Matthew Young

Abstract: We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $α_k = 0.32$. We optically char… ▽ More We present an updated design of the 220 GHz microwave kinetic inductance detector (MKID) pixel for SPT-3G+, the next-generation camera for the South Pole Telescope. We show results of the dark testing of a 63-pixel array with mean inductor quality factor $Q_i = 4.8 \times 10^5$, aluminum inductor transition temperature $T_c = 1.19$ K, and kinetic inductance fraction $α_k = 0.32$. We optically characterize both the microstrip-coupled and CPW-coupled resonators, and find both have a spectral response close to prediction with an optical efficiency of $η\sim 70\%$. However, we find slightly lower optical response on the lower edge of the band than predicted, with neighboring dark detectors showing more response in this region, though at level consistent with less than 5\% frequency shift relative to the optical detectors. The detectors show polarized response consistent with expectations, with a cross-polar response of $\sim 10\%$ for both detector orientations. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 6 pages, 5 figures, ASC 2022 proceedings

Quasiparticle Generation-Recombination Noise in the Limit of Low Detector Volume

Authors: J. Li, P. S. Barry, T. Cecil, C. L. Chang, K. Dibert, R. Gualtieri, M. Lisovenko, Z. Pan, V. Yefremenko, G. Wang, J. Zhang

Abstract: We have measured the quasiparticle generation-recombination (GR) noise in aluminium lumped element kinetic inductors with a wide range of detector volumes at various temperatures. The basic detector consists of meandering inductor and interdigitated capacitor fingers. The inductor volume is varied from 2 to 153 μm^{3} by changing the inductor width and length to maintain a constant inductance. We… ▽ More We have measured the quasiparticle generation-recombination (GR) noise in aluminium lumped element kinetic inductors with a wide range of detector volumes at various temperatures. The basic detector consists of meandering inductor and interdigitated capacitor fingers. The inductor volume is varied from 2 to 153 μm^{3} by changing the inductor width and length to maintain a constant inductance. We started with measuring the power spectrum density (PSD) of the detectors frequency noise which is a function of GR noise and we clearly observed the spectrum roll off at 10 kHz which corresponds to the quasiparticle lifetime. Using data from a temperature sweep of the resonator frequency we convert the frequency fluctuation to quasiparticle fluctuation and observe its strong dependence on detector volume: detectors with smaller volume display less quasiparticle noise amplitude. Meanwhile we observe a saturated quasiparticle density at low temperature from all detectors as the quasiparticle life time τqp approaches a constant value at low temperature. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Noise Optimization for MKIDs with Different Design Geometries and Material Selections

Authors: Z. Pan, K. R. Dibert, J. Zhang, P. S. Barry, A. J. Anderson, A. N. Bender, B. A. Benson, T. Cecil, C. L. Chang, R. Gualtieri, J. Li, M. Lisovenko, V. Novosad, M. Rouble, G. Wang, V. Yefremenko

Abstract: The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on the noise performance of a series of MKIDs intended for millimeter-wavelength experiments. We extract the contributions from two-level system noise in the dielect… ▽ More The separation and optimization of noise components is critical to microwave-kinetic inductance detector (MKID) development. We analyze the effect of several changes to the lumped-element inductor and interdigitated capacitor geometry on the noise performance of a series of MKIDs intended for millimeter-wavelength experiments. We extract the contributions from two-level system noise in the dielectric layer, the generation-recombination noise intrinsic to the superconducting thin-film, and system white noise from each detector noise power spectrum and characterize how these noise components depend on detector geometry, material, and measurement conditions such as driving power and temperature. We observe a reduction in the amplitude of two-level system noise with both an elevated sample temperature and an increased gap between the fingers within the interdigitated capacitors for both aluminum and niobium detectors. We also verify the expected reduction of the generation-recombination noise and associated quasiparticle lifetime with reduced inductor volume. This study also iterates over different materials, including aluminum, niobium, and aluminum manganese, and compares the results with an underlying physical model. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Measurement of Dielectric Loss in Silicon Nitride at Centimeter and Millimeter Wavelengths

Authors: Z. Pan, P. S. Barry, T. Cecil, C. Albert, A. N. Bender, C. L. Chang, R. Gualtieri, J. Hood, J. Li, J. Zhang, M. Lisovenko, V. Novosad, G. Wang, V. Yefremenko

Abstract: This work presents a suite of measurement techniques for characterizing the dielectric loss tangent across a wide frequency range from $\sim$1 GHz to 150 GHz using the same test chip. In the first method, we fit data from a microwave resonator at different temperatures to a model that captures the two-level system (TLS) response to extract and characterize both the real and imaginary components of… ▽ More This work presents a suite of measurement techniques for characterizing the dielectric loss tangent across a wide frequency range from $\sim$1 GHz to 150 GHz using the same test chip. In the first method, we fit data from a microwave resonator at different temperatures to a model that captures the two-level system (TLS) response to extract and characterize both the real and imaginary components of the dielectric loss. The inverse of the internal quality factor is a second measure of the overall loss of the resonator, where TLS loss through the dielectric material is typically the dominant source. The third technique is a differential optical measurement at 150 GHz. The same antenna feeds two microstrip lines with different lengths that terminate in two microwave kinetic inductance detectors (MKIDs). The difference in the detector response is used to estimate the loss per unit length of the microstrip line. Our results suggest a larger loss for SiN$_x$ at 150 GHz of ${\mathrm{\tan δ\sim 4\times10^{-3}}}$ compared to ${\mathrm{2.0\times10^{-3}}}$ and ${\mathrm{\gtrsim 1\times10^{-3}}}$ measured at $\sim$1 GHz using the other two methods. {These measurement techniques can be applied to other dielectrics by adjusting the microstrip lengths to provide enough optical efficiency contrast and other mm/sub-mm frequency ranges by tuning the antenna and feedhorn accordingly. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Fabrication Development for SPT-SLIM, a Superconducting Spectrometer for Line Intensity Map**

Authors: T. Cecil, C. Albert, A. J. Anderson, P. S. Barry, B. Benson, C. Cotter, C. Chang, M. Dobbs, K. Dibert, R. Gualtieri, K. S. Karkare, M. Lisovenko, D. P. Marrone, J. Montgomery, Z. Pan, G. Robson, M. Rouble, E. Shirokoff, G. Smecher, G. Wang, V. Yefremenko

Abstract: Line Intensity Map** (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format a… ▽ More Line Intensity Map** (LIM) is a new observational technique that uses low-resolution observations of line emission to efficiently trace the large-scale structure of the Universe out to high redshift. Common mm/sub-mm emission lines are accessible from ground-based observatories, and the requirements on the detectors for LIM at mm-wavelengths are well matched to the capabilities of large-format arrays of superconducting sensors. We describe the development of an R = 300 on-chip superconducting filter-bank spectrometer covering the 120--180 GHz band optimized for future mm-LIM experiments, focusing on SPT-SLIM, a pathfinder LIM instrument for the South Pole Telescope. Radiation is coupled from the telescope optical system to the spectrometer chip via an array of feedhorn-coupled orthomode transducers. Superconducting microstrip transmission lines then carry the signal to an array of channelizing half-wavelength resonators, and the output of each spectral channel is sensed by a lumped element kinetic inductance detector (leKID). Key areas of development include incorporating new low-loss dielectrics to improve both the achievable spectral resolution and optical efficiency and development of a robust fabrication process to create a galvanic connection between ultra-pure superconducting thin-films to realize multi-material (hybrid) leKIDs. We provide an overview of the spectrometer design, fabrication process, and prototype devices. △ Less

Submitted 3 April, 2023; originally announced April 2023.

Comments: 7 pages, 7 figures, presented at 2022 Applied Superconductivity Conference

Electromagnetic Properties of Aluminum-based Bilayers for Kinetic Inductance Detectors

Authors: G. Wang, P. S. Barry, T. Cecil, C. L. Chang, J. Li, M. Lisovenko, V. Novosad, Z. Pan, V. G. Yefremenko, J. Zhang

Abstract: The complex conductivity of a superconducting thin film is related to the quasiparticle density, which depends on the physical temperature and can also be modified by external pair breaking with photons and phonons. This relationship forms the underlying operating principle of Kinetic Inductance Detectors (KIDs), where the detection threshold is governed by the superconducting energy gap. We inves… ▽ More The complex conductivity of a superconducting thin film is related to the quasiparticle density, which depends on the physical temperature and can also be modified by external pair breaking with photons and phonons. This relationship forms the underlying operating principle of Kinetic Inductance Detectors (KIDs), where the detection threshold is governed by the superconducting energy gap. We investigate the electromagnetic properties of thin-film aluminum that is proximitized with either a normal metal layer of copper or a superconducting layer with a lower $T_C$, such as iridium, in order to extend the operating range of KIDs. Using the Usadel equations along with the Nam expressions for complex conductivity, we calculate the density of states and the complex conductivity of the resulting bilayers to understand the dependence of the pair breaking threshold, surface impedance, and intrinsic quality factor of superconducting bilayers on the relative film thicknesses. The calculations and analyses provide theoretical insights in designing aluminum-based bilayer kinetic inductance detectors for detection of microwave photons and athermal phonons at the frequencies well below the pair breaking threshold of a pure aluminum film. △ Less

Submitted 1 April, 2023; originally announced April 2023.

Comments: Submitted as a proceeding for Applied Superconductivity Conference 2022

Journal ref: IEEE Transactions on Applied Superconductivity, August 2023

Experimental Demonstration of Network Convergence with Coherent and AnalogRadio-over-Fibre signals For Densified 5.5G/6G Small Cell Networks

Authors: Frank Slyne, Colm Browning, Amol Delmade, Liam P. Barry, Marco Ruffini

Abstract: In this work we analyse and demonstrate the coexistence of digital coherent and analogue radio over fibre signals over an access-metro transmission network and field fibre. We analyse how the spectral proximity of the two signals and the non-ideal filter alignment of typical telecomms-grade ROADMs affect the signal performance. Our results show that coexistence is indeed possible, although perform… ▽ More In this work we analyse and demonstrate the coexistence of digital coherent and analogue radio over fibre signals over an access-metro transmission network and field fibre. We analyse how the spectral proximity of the two signals and the non-ideal filter alignment of typical telecomms-grade ROADMs affect the signal performance. Our results show that coexistence is indeed possible, although performance deteriorates with the increase in number of ROADMs in the network topology. Thus, while todays access-metro networks will be able to support future 5.5 and 6G cell densification operating at mmWave and THz frequency, using spectral efficient analogue radio over fibre transmission, there will be trade-offs to be considered. In our experiment setup, we show that the limit for ARoF accessible performance is reached after transmission over 3 ROADMs and a total of 49 km of fibre. △ Less

Submitted 9 February, 2023; originally announced February 2023.

Tomography of pions and protons via transverse momentum dependent distributions

Authors: P. C. Barry, L. Gamberg, W. Melnitchouk, E. Moffat, D. Pitonyak, A. Prokudin, N. Sato

Abstract: We perform the first simultaneous extraction of parton collinear and transverse degrees of freedom from low-energy fixed-target Drell-Yan data in order to compare the transverse momentum dependent (TMD) parton distribution functions (PDFs) of the pion and proton. We demonstrate that the transverse separation of the quark field encoded in TMDs of the pion is more than $4 σ$ smaller than that of the… ▽ More We perform the first simultaneous extraction of parton collinear and transverse degrees of freedom from low-energy fixed-target Drell-Yan data in order to compare the transverse momentum dependent (TMD) parton distribution functions (PDFs) of the pion and proton. We demonstrate that the transverse separation of the quark field encoded in TMDs of the pion is more than $4 σ$ smaller than that of the proton. Additionally, we find the transverse separation of the quark field decreases as its longitudinal momentum fraction decreases. In studying the nuclear modification of TMDs, we find clear evidence for a transverse EMC effect. We comment on possible explanations for these intriguing behaviors, which call for a deeper examination of tomography in a variety of strongly interacting quark-gluon systems. △ Less

Submitted 20 October, 2023; v1 submitted 2 February, 2023; originally announced February 2023.

Comments: 7 pages, 3 figures; version to appear in Phys. Rev. D

Report number: JLAB-THY-23-3749, ADP-23-03/T1212

Journal ref: Phys. Rev. D 108, L091504 (2023)

Two kinds of partial Motzkin paths with air pockets

Authors: Jean-Luc Baril, Paul Barry

Abstract: Motzkin paths with air pockets (MAP) are defined as a generalization of Dyck paths with air pockets by adding some horizontal steps with certain conditions. In this paper, we introduce two generalizations. The first one consists of lattice paths in $\Bbb{N}^2$ starting at the origin made of steps $U=(1,1)$, $D_k=(1,-k)$, $k\geq 1$ and $H=(1,0)$, where two down steps cannot be consecutive, while th… ▽ More Motzkin paths with air pockets (MAP) are defined as a generalization of Dyck paths with air pockets by adding some horizontal steps with certain conditions. In this paper, we introduce two generalizations. The first one consists of lattice paths in $\Bbb{N}^2$ starting at the origin made of steps $U=(1,1)$, $D_k=(1,-k)$, $k\geq 1$ and $H=(1,0)$, where two down steps cannot be consecutive, while the second one are lattice paths in $\Bbb{N}^2$ starting at the origin, made of steps $U$, $D_k$ and $H$, where each step $D_k$ and $H$ is necessarily followed by an up step, except for the last step of the path. We provide enumerative results for these paths according to the length, the type of the last step, and the height of its end-point. A similar study is made for these paths read from right to left. As a byproduct, we obtain new classes of paths counted by the Motzkin numbers. Finally, we express our results using Riordan arrays. △ Less

Submitted 23 December, 2022; originally announced December 2022.

Conjectures on Somos $4$, $6$ and $8$ sequences using Riordan arrays and the Catalan numbers

Authors: Paul Barry

Abstract: We give conjectures on the form of families of integer sequences whose Hankel transforms are, respectively, $(α, β)$ Somos $4$ sequences, $(α, 0, γ)$ Somos $6$ sequences, and $(α, β, γ, δ)$ Somos $8$ sequences, for particular values of $α$, $β$, $γ$, $δ$ which we describe. The sequences involved can be described in terms of the application of certain stretched Riordan arrays to the Catalan numbers… ▽ More We give conjectures on the form of families of integer sequences whose Hankel transforms are, respectively, $(α, β)$ Somos $4$ sequences, $(α, 0, γ)$ Somos $6$ sequences, and $(α, β, γ, δ)$ Somos $8$ sequences, for particular values of $α$, $β$, $γ$, $δ$ which we describe. The sequences involved can be described in terms of the application of certain stretched Riordan arrays to the Catalan numbers, accompanied by a (sequence) Hankel transform. The combination of Riordan array and the Catalan numbers results from the study of certain generalized Jacobi continued fractions, based on the Counting Automata Methodology. △ Less

Submitted 22 November, 2022; originally announced November 2022.

Comments: 13 pages

MSC Class: Primary 11B37; Secondary 05A15; 15B36; 11A55; 15A15; 15B05

SPT-3G+: Map** the High-Frequency Cosmic Microwave Background Using Kinetic Inductance Detectors

Authors: A. J. Anderson, P. Barry, A. N. Bender, B. A. Benson, L. E. Bleem, J. E. Carlstrom, T. W. Cecil, C. L. Chang, T. M. Crawford, K. R. Dibert, M. A. Dobbs, K. Fichman, N. W. Halverson, W. L. Holzapfel, A. Hryciuk, K. S. Karkare, J. Li, M. Lisovenko, D. Marrone, J. McMahon, J. Montgomery, T. Natoli, Z. Pan, S. Raghunathan, C. L. Reichardt , et al. (6 additional authors not shown)

Abstract: We present the design and science goals of SPT-3G+, a new camera for the South Pole Telescope, which will consist of a dense array of 34100 kinetic inductance detectors measuring the cosmic microwave background (CMB) at 220 GHz, 285 GHz, and 345 GHz. The SPT-3G+ dataset will enable new constraints on the process of reionization, including measurements of the patchy kinematic Sunyaev-Zeldovich effe… ▽ More We present the design and science goals of SPT-3G+, a new camera for the South Pole Telescope, which will consist of a dense array of 34100 kinetic inductance detectors measuring the cosmic microwave background (CMB) at 220 GHz, 285 GHz, and 345 GHz. The SPT-3G+ dataset will enable new constraints on the process of reionization, including measurements of the patchy kinematic Sunyaev-Zeldovich effect and improved constraints on the optical depth due to reionization. At the same time, it will serve as a pathfinder for the detection of Rayleigh scattering, which could allow future CMB surveys to constrain cosmological parameters better than from the primary CMB alone. In addition, the combined, multi-band SPT-3G and SPT-3G+ survey data will have several synergies that enhance the original SPT-3G survey, including: extending the redshift-reach of SZ cluster surveys to $z > 2$; understanding the relationship between magnetic fields and star formation in our Galaxy; improved characterization of the impact of dust on inflationary B-mode searches; and characterizing astrophysical transients at the boundary between mm and sub-mm wavelengths. Finally, the modular design of the SPT-3G+ camera allows it to serve as an on-sky demonstrator for new detector technologies employing microwave readout, such as the on-chip spectrometers that we expect to deploy during the SPT-3G+ survey. In this paper, we describe the science goals of the project and the key technology developments that enable its powerful yet compact design. △ Less

Submitted 17 August, 2022; originally announced August 2022.

Comments: 26 pages, 9 figures, to appear in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

Report number: FERMILAB-CONF-22-622-LDRD-PPD

Conceptual Design of the Modular Detector and Readout System for the CMB-S4 survey experiment

Authors: D. R. Barron, Z. Ahmed, J. Aguilar, A. J. Anderson, C. F. Baker, P. S. Barry, J. A. Beall, A. N. Bender, B. A. Benson, R. W. Besuner, T. W. Cecil, C. L. Chang, S. C. Chapman, G. E. Chesmore, G. Derylo, W. B. Doriese, S. M. Duff, T. Elleflot, J. P. Filippini, B. Flaugher, J. G. Gomez, P. K. Grimes, R. Gualtieri, I. Gullett, G. Haller , et al. (25 additional authors not shown)

Abstract: We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental… ▽ More We present the conceptual design of the modular detector and readout system for the Cosmic Microwave Background Stage 4 (CMB-S4) ground-based survey experiment. CMB-S4 will map the cosmic microwave background (CMB) and the millimeter-wave sky to unprecedented sensitivity, using 500,000 superconducting detectors observing from Chile and Antarctica to map over 60 percent of the sky. The fundamental building block of the detector and readout system is a detector module package operated at 100 mK, which is connected to a readout and amplification chain that carries signals out to room temperature. It uses arrays of feedhorn-coupled orthomode transducers (OMT) that collect optical power from the sky onto dc-voltage-biased transition-edge sensor (TES) bolometers. The resulting current signal in the TESs is then amplified by a two-stage cryogenic Superconducting Quantum Interference Device (SQUID) system with a time-division multiplexer to reduce wire count, and matching room-temperature electronics to condition and transmit signals to the data acquisition system. Sensitivity and systematics requirements are being developed for the detector and readout system over a wide range of observing bands (20 to 300 GHz) and optical powers to accomplish CMB-S4's science goals. While the design incorporates the successes of previous generations of CMB instruments, CMB-S4 requires an order of magnitude more detectors than any prior experiment. This requires fabrication of complex superconducting circuits on over 10 square meters of silicon, as well as significant amounts of precision wiring, assembly and cryogenic testing. △ Less

Submitted 3 August, 2022; originally announced August 2022.

Comments: 25 pages, 15 figures, presented at and published in the proceedings of SPIE Astronomical Telescopes and Instrumentation 2022

A Three-parameter Family Of Involutions In The Riordan Group Defined By Orthogonal Polynomials

Authors: Paul Barry

Abstract: We show how to define, for every Riordan group element $(g(x), f(x))$, an involution in the Riordan group. More generally, we show that for every pseudo-involution $P$ in the Riordan group, we can define a new involution beginning with an arbitrary element $(g(x), f(x))$ in the Riordan group. We then use this result to show that certain two-parameter families of orthogonal polynomials defined by a… ▽ More We show how to define, for every Riordan group element $(g(x), f(x))$, an involution in the Riordan group. More generally, we show that for every pseudo-involution $P$ in the Riordan group, we can define a new involution beginning with an arbitrary element $(g(x), f(x))$ in the Riordan group. We then use this result to show that certain two-parameter families of orthogonal polynomials defined by a Riordan array can lead to involutions in the Riordan group, and we give an explicit form of these involutions. △ Less

Submitted 6 July, 2022; originally announced July 2022.

Comments: 9 pages

MSC Class: Primary 05A15. Secondary 05A05; 05A19; 11B83

Complementarity of experimental and lattice QCD data on pion parton distributions

Authors: P. C. Barry, C. Egerer, J. Karpie, W. Melnitchouk, C. Monahan, K. Orginos, Jian-Wei Qiu, D. Richards, N. Sato, R. S. Sufian, S. Zafeiropoulos

Abstract: We extract pion parton distribution functions (PDFs) in a Monte Carlo global QCD analysis of experimental data together with reduced Ioffe time pseudo-distributions and matrix elements of current-current correlators generated from lattice QCD. By including both experimental and lattice QCD data, our analysis rigorously quantifies both the uncertainties of the pion PDFs and systematic effects intri… ▽ More We extract pion parton distribution functions (PDFs) in a Monte Carlo global QCD analysis of experimental data together with reduced Ioffe time pseudo-distributions and matrix elements of current-current correlators generated from lattice QCD. By including both experimental and lattice QCD data, our analysis rigorously quantifies both the uncertainties of the pion PDFs and systematic effects intrinsic to the lattice QCD observables. The reduced Ioffe time pseudo-distributions significantly decrease the uncertainties on the PDFs, while the current-current correlators are limited by the systematic effects associated with the lattice. Consistent with recent phenomenological determinations, the behavior of the valence quark distribution of the pion at large momentum fraction is found to be $\sim (1-x)^{ β_{\rm eff}}$ with $β_{\rm eff} \approx 1.0-1.2$. △ Less

Submitted 10 June, 2022; v1 submitted 1 April, 2022; originally announced April 2022.

Comments: 47 pages, 15 figures

Report number: JLAB-THY-22-3592

Strategies for reducing frequency scatter in large arrays of superconducting resonators

Authors: J. Li, P. S. Barry, Z. Pan, C. Albert, T. Cecil, C. L. Chang, K. Dibert, M. Lisovenko, V. Yefremenko

Abstract: Superconducting resonators are now found in a broad range of applications that require high-fidelity measurement of low-energy signals. A common feature across almost all of these applications is the need for increased numbers of resonators to further improve sensitivity, and the ability to read out large numbers of resonators without the need for additional cryogenic complexity is a primary motiv… ▽ More Superconducting resonators are now found in a broad range of applications that require high-fidelity measurement of low-energy signals. A common feature across almost all of these applications is the need for increased numbers of resonators to further improve sensitivity, and the ability to read out large numbers of resonators without the need for additional cryogenic complexity is a primary motivation. One of the major limitations of current resonator arrays is the observed scatter in the resonator frequencies when compared to the initial design. Here we present recent progress toward identifying one of the dominant underlying causes of resonator scatter, inductor line width fluctuation. We designed and fabricated an array of lumped-element resonators with inductor line width changing from 1.8um to 2.2um in step of 0.1um defined with electron-beam lithography to probe and quantify the systematic variation of resonance frequency across a 6-inch wafer. The resonators showed a linear frequency shift of 20MHz (140FWHM) and 30MHz (214FWHM), respectively, as they are connected to two different capacitors. This linear relationship matches our theoretical prediction. The widely used MLA photon lithography facility for MKID fabrication has a resolution on the order of 600nm, which could cause frequency fluctuation on the order of 100MHz or 710FWHM. △ Less

Submitted 21 March, 2022; originally announced March 2022.

Large-Format, Transmission-Line-Coupled Kinetic Inductance Detector Arrays for HEP at Millimeter Wavelengths

Authors: Peter S. Barry, Clarence. C. Chang, Sunil Golwala, Erik Shirokoff

Abstract: The kinetic inductance detector (KID) is a versatile and scalable detector technology with a wide range of applications. These superconducting detectors offer significant advantages: simple and robust fabrication, intrinsic multiplexing that will allow thousands of detectors to be read out with a single microwave line, and simple and low cost room temperature electronics. These strengths make KIDs… ▽ More The kinetic inductance detector (KID) is a versatile and scalable detector technology with a wide range of applications. These superconducting detectors offer significant advantages: simple and robust fabrication, intrinsic multiplexing that will allow thousands of detectors to be read out with a single microwave line, and simple and low cost room temperature electronics. These strengths make KIDs especially attractive for HEP science via mm-wave cosmological studies. Examples of these potential cosmological observations include studying cosmic acceleration (Dark Energy) through measurements of the kinetic Sunyaev-Zeldovich effect, precision cosmology through ultra-deep measurements of small-scale CMB anisotropy, and mm-wave spectroscopy to map out the distribution of cosmological structure at the largest scales and highest redshifts. The principal technical challenge for these kinds of projects is the successful deployment of large-scale high-density focal planes -- a need that can be addressed by KID technology. In this paper, we present an overview of microstrip-coupled KIDs for use in mm-wave observations and outline the research and development needed to advance this class of technology and enable these upcoming large-scale experiments. △ Less

Submitted 25 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021

Snowmass 2021 CMB-S4 White Paper

Authors: Kevork Abazajian, Arwa Abdulghafour, Graeme E. Addison, Peter Adshead, Zeeshan Ahmed, Marco Ajello, Daniel Akerib, Steven W. Allen, David Alonso, Marcelo Alvarez, Mustafa A. Amin, Mandana Amiri, Adam Anderson, Behzad Ansarinejad, Melanie Archipley, Kam S. Arnold, Matt Ashby, Han Aung, Carlo Baccigalupi, Carina Baker, Abhishek Bakshi, Debbie Bard, Denis Barkats, Darcy Barron, Peter S. Barry , et al. (331 additional authors not shown)

Abstract: This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. This Snowmass 2021 White Paper describes the Cosmic Microwave Background Stage 4 project CMB-S4, which is designed to cross critical thresholds in our understanding of the origin and evolution of the Universe, from the highest energies at the dawn of time through the growth of structure to the present day. We provide an overview of the science case, the technical design, and project plan. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: Contribution to Snowmass 2021. arXiv admin note: substantial text overlap with arXiv:1908.01062, arXiv:1907.04473

Snowmass2021 Cosmic Frontier: Cosmic Microwave Background Measurements White Paper

Authors: Clarence L. Chang, Kevin M. Huffenberger, Bradford A. Benson, Federico Bianchini, Jens Chluba, Jacques Delabrouille, Raphael Flauger, Shaul Hanany, William C. Jones, Alan J. Kogut, Jeffrey J. McMahon, Joel Meyers, Neelima Sehgal, Sara M. Simon, Caterina Umilta, Kevork N. Abazajian, Zeeshan Ahmed, Yashar Akrami, Adam J. Anderson, Behzad Ansarinejad, Jason Austermann, Carlo Baccigalupi, Denis Barkats, Darcy Barron, Peter S. Barry , et al. (107 additional authors not shown)

Abstract: This is a solicited whitepaper for the Snowmass 2021 community planning exercise. The paper focuses on measurements and science with the Cosmic Microwave Background (CMB). The CMB is foundational to our understanding of modern physics and continues to be a powerful tool driving our understanding of cosmology and particle physics. In this paper, we outline the broad and unique impact of CMB science… ▽ More This is a solicited whitepaper for the Snowmass 2021 community planning exercise. The paper focuses on measurements and science with the Cosmic Microwave Background (CMB). The CMB is foundational to our understanding of modern physics and continues to be a powerful tool driving our understanding of cosmology and particle physics. In this paper, we outline the broad and unique impact of CMB science for the High Energy Cosmic Frontier in the upcoming decade. We also describe the progression of ground-based CMB experiments, which shows that the community is prepared to develop the key capabilities and facilities needed to achieve these transformative CMB measurements. △ Less

Submitted 15 March, 2022; originally announced March 2022.

Comments: contribution to Snowmass 2021

Dual-mode microresonators as straightforward access to octave-spanning dissipative Kerr solitons

Authors: Haizhong Weng, Adnan Ali Afridi, **g Li, Michael McDermott, Huilan Tu, Liam P. Barry, Qiaoyin Lu, Weihua Guo, John F. Donegan

Abstract: The Kerr soliton frequency comb is a revolutionary compact ruler of coherent light that allows applications, from precision metrology to quantum information technology. The universal, reliable, and low-cost soliton microcomb source is key to these applications. In this work, we thoroughly present an innovative design strategy for realizing optical microresonators with two adjacent modes, separated… ▽ More The Kerr soliton frequency comb is a revolutionary compact ruler of coherent light that allows applications, from precision metrology to quantum information technology. The universal, reliable, and low-cost soliton microcomb source is key to these applications. In this work, we thoroughly present an innovative design strategy for realizing optical microresonators with two adjacent modes, separated by approximately 10 GHz, which stabilizes soliton formation without using additional auxiliary laser or RF components. We demonstrate the deterministic generation of the single-solitons that span 1.5-octaves, i.e., near 200 THz, via adiabatic pump wavelength tuning. The ultra-wide soliton existence ranges up to 17 GHz not only suggests the robustness of the system but will also extend the applications of soliton combs. Moreover, the proposed scheme is found to easily give rise to multi-solitons as well as the soliton crystals featuring enhanced repetition rate (2 and 3 THz) and conversion efficiency greater than 10%. We also show the effective thermal tuning of mode separation for stably accessing single-soliton. Our results are crucial for the chip-scale self-referenced frequency combs with a simplified configuration. △ Less

Submitted 20 February, 2022; originally announced February 2022.

Comments: 9 pages, 5 figures, with 3 pages supplementary material

Asteroid Measurements at Millimeter Wavelengths with the South Pole Telescope

Authors: P. M. Chichura, A. Foster, C. Patel, N. Ossa-Jaen, P. A. R. Ade, Z. Ahmed, A. J. Anderson, M. Archipley, J. E. Austermann, J. S. Avva, L. Balkenhol, P. S. Barry, R. Basu Thakur, J. A. Beall, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil , et al. (119 additional authors not shown)

Abstract: We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing st… ▽ More We present the first measurements of asteroids in millimeter wavelength (mm) data from the South Pole Telescope (SPT), which is used primarily to study the cosmic microwave background (CMB). We analyze maps of two $\sim270$ deg$^2$ sky regions near the ecliptic plane, each observed with the SPTpol camera $\sim100$ times over one month. We subtract the mean of all maps of a given field, removing static sky signal, and then average the mean-subtracted maps at known asteroid locations. We detect three asteroids$\text{ -- }$(324) Bamberga, (13) Egeria, and (22) Kalliope$\text{ -- }$with signal-to-noise ratios (S/N) of 11.2, 10.4, and 6.1, respectively, at 2.0 mm (150 GHz); we also detect (324) Bamberga with S/N of 4.1 at 3.2 mm (95 GHz). We place constraints on these asteroids' effective emissivities, brightness temperatures, and light curve modulation amplitude. Our flux density measurements of (324) Bamberga and (13) Egeria roughly agree with predictions, while our measurements of (22) Kalliope suggest lower flux, corresponding to effective emissivities of $0.66 \pm 0.11$ at 2.0 mm and $<0.47$ at 3.2mm. We predict the asteroids detectable in other SPT datasets and find good agreement with detections of (772) Tanete and (1093) Freda in recent data from the SPT-3G camera, which has $\sim10 \times$ the map** speed of SPTpol. This work is the first focused analysis of asteroids in data from CMB surveys, and it demonstrates we can repurpose historic and future datasets for asteroid studies. Future SPT measurements can help constrain the distribution of surface properties over a larger asteroid population. △ Less

Submitted 21 April, 2023; v1 submitted 2 February, 2022; originally announced February 2022.

Comments: 21 pages, 9 figures

Journal ref: 2022 ApJ 936 173

Testing low-loss microstrip materials with MKIDs for microwave applications

Authors: J. Hood, P. Barry, T. Cecil, C. Chang, S. Meyer, J. Li, Z. Pan, E. Shirokoff, A. Tang

Abstract: Future measurements of the millimeter-wavelength sky require a low-loss superconducting microstrip, typically made from niobium and silicon-nitride, coupling the antenna to detectors. We propose a simple device for characterizing these low-loss microstrips at 150 GHz. In our device we illuminate an antenna with a thermal source and compare the measured power at 150 GHz transmitted down microstrips… ▽ More Future measurements of the millimeter-wavelength sky require a low-loss superconducting microstrip, typically made from niobium and silicon-nitride, coupling the antenna to detectors. We propose a simple device for characterizing these low-loss microstrips at 150 GHz. In our device we illuminate an antenna with a thermal source and compare the measured power at 150 GHz transmitted down microstrips of different lengths. The power measurement is made using Microwave Kinetic Inductance Detectors (MKIDs) fabricated directly onto the microstrip dielectric, and comparing the measured response provides a direct measurement of the microstrip loss. Our proposed structure provides a simple device (4 layers and a DRIE etch) for characterizing the dielectric loss of various microstrip materials and substrates. We present initial results using these devices. We demonstrate that the millimeter wavelength loss of microstrip lines, a few tens of millimeters long, can be measured using a practical aluminum MKID with a black body source at a few tens of Kelvin. △ Less

Submitted 31 January, 2022; originally announced February 2022.

Comments: 6 pages, 5 figures, submitted to Journal of Low Temperature Physics

Coherent coupling of two remote magnonic resonators mediated by superconducting circuits

Authors: Yi Li, Volodymyr G. Yefremenko, Marharyta Lisovenko, Cody Trevillian, Tomas Polakovic, Thomas W. Cecil, Pete S. Barry, John Pearson, Ralu Divan, Vasyl Tyberkevych, Clarence L. Chang, Ulrich Welp, Wai-Kwong Kwok, Valentine Novosad

Abstract: We demonstrate microwave-mediated distant magnon-magnon coupling on a superconducting circuit platform, incorporating chip-mounted single-crystal Y$_3$Fe$_5$O$_{12}$ (YIG) spheres. Coherent level repulsion and dissipative level attraction between the magnon modes of the two YIG spheres are demonstrated. The former is mediated by cavity photons of a superconducting resonator, and the latter is medi… ▽ More We demonstrate microwave-mediated distant magnon-magnon coupling on a superconducting circuit platform, incorporating chip-mounted single-crystal Y$_3$Fe$_5$O$_{12}$ (YIG) spheres. Coherent level repulsion and dissipative level attraction between the magnon modes of the two YIG spheres are demonstrated. The former is mediated by cavity photons of a superconducting resonator, and the latter is mediated by propagating photons of a coplanar waveguide. Our results open new avenues towards exploring integrated hybrid magnonic networks for coherent information processing on a quantum-compatible superconducting platform. △ Less

Submitted 15 January, 2022; originally announced January 2022.

Comments: 6 pages, 4 figures, Accepted in Phys. Rev. Lett

Broadband solenoidal haloscope for terahertz axion detection

Authors: Jesse Liu, Kristin Dona, Gabe Hoshino, Stefan Knirck, Noah Kurinsky, Matthew Malaker, David W. Miller, Andrew Sonnenschein, Mohamed H. Awida, Peter S. Barry, Karl K. Berggren, Daniel Bowring, Gianpaolo Carosi, Clarence Chang, Aaron Chou, Rakshya Khatiwada, Samantha Lewis, Juliang Li, Sae Woo Nam, Omid Noroozian, Tony X. Zhou

Abstract: We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry en… ▽ More We introduce the Broadband Reflector Experiment for Axion Detection (BREAD) conceptual design and science program. This haloscope plans to search for bosonic dark matter across the [10$^{-3}$, 1] eV ([0.24, 240] THz) mass range. BREAD proposes a cylindrical metal barrel to convert dark matter into photons, which a novel parabolic reflector design focuses onto a photosensor. This unique geometry enables enclosure in standard cryostats and high-field solenoids, overcoming limitations of current dish antennas. A pilot 0.7 m$^{2}$ barrel experiment planned at Fermilab is projected to surpass existing dark photon coupling constraints by over a decade with one-day runtime. Axion sensitivity requires $<10^{-20}$ W/$\sqrt{\textrm{Hz}}$ sensor noise equivalent power with a 10 T solenoid and 10 m$^{2}$ barrel. We project BREAD sensitivity for various sensor technologies and discuss future prospects. △ Less

Submitted 24 March, 2022; v1 submitted 23 November, 2021; originally announced November 2021.

Comments: 5 pages, 2 figures + references and appendices, v2 matches journal version

Journal ref: Phys. Rev. Lett. 128 (2022) 131801

Development of Superconducting On-chip Fourier Transform Spectrometers

Authors: R. Basu Thakur, A. Steiger, S. Shu, F. Faramarzi, N. Klimovich, P. K. Day, E. Shirokoff, P. D. Mauskopf, P. S. Barry

Abstract: Superconducting On-chip Fourier Transform Spectrometers (SOFTS) are broadband, compact and electronic interferometers. Being extremely compact, SOFTS can fit into standard antenna coupled detector architectures. SOFTS will enable kilo-pixel spectro-imaging focal planes enhancing sub-millimeter science; particularly cluster astrophysics / cosmology, CMB-science and line intensity map**. This proc… ▽ More Superconducting On-chip Fourier Transform Spectrometers (SOFTS) are broadband, compact and electronic interferometers. Being extremely compact, SOFTS can fit into standard antenna coupled detector architectures. SOFTS will enable kilo-pixel spectro-imaging focal planes enhancing sub-millimeter science; particularly cluster astrophysics / cosmology, CMB-science and line intensity map**. This proceeding details the development, design and bench-marking of RF on-chip architecture of SOFTS for Ka and W bands. △ Less

Submitted 23 August, 2022; v1 submitted 11 November, 2021; originally announced November 2021.

Development of MKIDs for measurement of the Cosmic Microwave Background with the South Pole Telescope

Authors: Karia Dibert, Pete Barry, Zhaodi Pan, Adam Anderson, Bradford Benson, Clarence Chang, Kirit Karkare, Juliang Li, Tyler Natoli, Maclean Rouble, Erik Shirokoff, Antony Stark

Abstract: We present details of the design, simulation, and initial test results of prototype detectors for the fourth-generation receiver of the South Pole Telescope (SPT). Optimized for the detection of key secondary anisotropies of the cosmic microwave background (CMB), SPT-3G+ will measure the temperature and polarization of the mm/sub-mm sky at 220, 285, and 345 GHz, beyond the peak of the CMB blackbod… ▽ More We present details of the design, simulation, and initial test results of prototype detectors for the fourth-generation receiver of the South Pole Telescope (SPT). Optimized for the detection of key secondary anisotropies of the cosmic microwave background (CMB), SPT-3G+ will measure the temperature and polarization of the mm/sub-mm sky at 220, 285, and 345 GHz, beyond the peak of the CMB blackbody spectrum. The SPT-3G+ focal plane will be populated with microwave kinetic inductance detectors (MKIDs), allowing for significantly increased detector density with reduced cryogenic complexity. We present simulation-backed designs for single-color dual-polarization MKID pixels at each SPT-3G+ observation frequency. We further describe design choices made to promote resonator quality and uniformity, enabling us to maximize the available readout bandwidth. We also discuss aspects of the fabrication process that enable rapid production of these devices and present an initial dark characterization of a series of prototype devices. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 8 pages, 5 figures, submitted to the 19th International Workshop on Low Temperature Detectors (LTD19) Proceedings

Design of SPT-SLIM focal plane; a spectroscopic imaging array for the South Pole Telescope

Authors: P. S. Barry, A. Anderson, B. Benson, J. E. Carlstrom, T. Cecil, C. Chang, M. Dobbs, M. Hollister, K. S. Karkare, G. K. Keating, D. Marrone, J. McMahon, J. Montgomery, Z. Pan, G. Robson, M. Rouble, E. Shirokoff, G. Smecher

Abstract: The Summertime Line Intensity Mapper (SLIM) is a mm-wave line-intensity map** (mm-LIM) experiment for the South Pole Telescope (SPT). The goal of SPT-SLIM is to serve as a technical and scientific pathfinder for the demonstration of the suitability and in-field performance of multi-pixel superconducting filterbank spectrometers for future mm-LIM experiments. Scheduled to deploy in the 2023-24 au… ▽ More The Summertime Line Intensity Mapper (SLIM) is a mm-wave line-intensity map** (mm-LIM) experiment for the South Pole Telescope (SPT). The goal of SPT-SLIM is to serve as a technical and scientific pathfinder for the demonstration of the suitability and in-field performance of multi-pixel superconducting filterbank spectrometers for future mm-LIM experiments. Scheduled to deploy in the 2023-24 austral summer, the SPT-SLIM focal plane will include 18 dual-polarization pixels, each coupled to an $R = λ/Δλ$ = 300 thin- film microstrip filterbank spectrometer that spans the 2 mm atmospheric window (120-180 GHz). Each individual spectral channel feeds a microstrip-coupled lumped-element kinetic inductance detector, which provides the highly multiplexed readout for the 10k detectors needed for SPT-SLIM. Here we present an overview of the preliminary design of key aspects of the SPT-SLIM the focal plane array, a description of the detector architecture and predicted performance, and initial test results that will be used to inform the final design of the SPT- SLIM spectrometer array. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: Submitted to special issue of JLTP (proceedings of LTD19)

The Simulation and Design of an On-Chip Superconducting Millimetre Filter-Bank Spectrometer

Authors: Gethin Robson, Adam J. Anderson, Peter S. Barry, Simon Doyle, Kirit S. Karkare

Abstract: Superconducting on-chip filter-banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and sub-millimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $λ/2$ microstrip resonator to define a narrow ($λ/Δλ= 300$) spectral pass band, the filtered out… ▽ More Superconducting on-chip filter-banks provide a scalable, space saving solution to create imaging spectrometers at millimetre and sub-millimetre wavelengths. We present an easy to realise, lithographed superconducting filter design with a high tolerance to fabrication error. Using a capacitively coupled $λ/2$ microstrip resonator to define a narrow ($λ/Δλ= 300$) spectral pass band, the filtered output of a given spectrometer channel directly connects to a Lumped Element Kinetic Inductance Detector (LEKID). We show the tolerance analysis of our design, demonstrating $<11\%$ change in filter quality factor to any one realistic fabrication errors and a full filter-bank efficiency forecast to be 60\% after accounting for fabrication errors and dielectric loss tangent. △ Less

Submitted 14 June, 2022; v1 submitted 8 November, 2021; originally announced November 2021.

Comments: 8 pages, 5 figures. Pre-print for proceedings for the Journal of Low Temperature Physics, 19th Low Temperature Detectors Conference (LTD19)

Journal ref: Journal of Low Temperature Physics 2022

SPT-SLIM: A Line Intensity Map** Pathfinder for the South Pole Telescope

Authors: K. S. Karkare, A. J. Anderson, P. S. Barry, B. A. Benson, J. E. Carlstrom, T. Cecil, C. L. Chang, M. A. Dobbs, M. Hollister, G. K. Keating, D. P. Marrone, J. McMahon, J. Montgomery, Z. Pan, G. Robson, M. Rouble, E. Shirokoff, G. Smecher

Abstract: The South Pole Telescope Summertime Line Intensity Mapper (SPT-SLIM) is a pathfinder experiment that will demonstrate the use of on-chip filter-bank spectrometers for mm-wave line intensity map** (LIM). The SPT-SLIM focal plane consists of 18 dual-polarization R=300 filter-bank spectrometers covering 120-180 GHz, coupled to aluminum kinetic inductance detectors. A compact cryostat holds the dete… ▽ More The South Pole Telescope Summertime Line Intensity Mapper (SPT-SLIM) is a pathfinder experiment that will demonstrate the use of on-chip filter-bank spectrometers for mm-wave line intensity map** (LIM). The SPT-SLIM focal plane consists of 18 dual-polarization R=300 filter-bank spectrometers covering 120-180 GHz, coupled to aluminum kinetic inductance detectors. A compact cryostat holds the detectors at 100 mK and performs observations without removing the SPT-3G receiver. SPT-SLIM will be deployed to the 10-m South Pole Telescope for observations during the 2023-24 austral summer. We discuss the overall instrument design, expected detector performance and sensitivity to the LIM signal from CO at 0.5 < z < 2. The technology and observational techniques demonstrated by SPT-SLIM will enable next-generation LIM experiments that constrain cosmology beyond the redshift reach of galaxy surveys. △ Less

Submitted 8 November, 2021; originally announced November 2021.

Comments: 7 pages, 4 figures. Submitted to the Journal of Low Temperature Physics (Proceedings of the 19th International Workshop on Low Temperature Detectors)

Optical leakage mitigation in ortho-mode transducer detectors for microwave applications

Authors: Riccardo Gualtieri, Peter S. Barry, Thomas Cecil, Amy N. Bender, Clarence . L. Chang, John C. Hood, Margarita Lisovenko, Volodymyr G. Yefremenko

Abstract: Planar ortho-mode transducers (OMTs) are a commonly used method of coupling optical signals between waveguides and on-chip circuitry and detectors. While the ideal OMT-waveguide coupling requires minimal disturbance to the waveguide, when used for mm-wave applications the waveguide is typically constructed from two sections to allow the OMT probes to be inserted into the waveguide. This break in t… ▽ More Planar ortho-mode transducers (OMTs) are a commonly used method of coupling optical signals between waveguides and on-chip circuitry and detectors. While the ideal OMT-waveguide coupling requires minimal disturbance to the waveguide, when used for mm-wave applications the waveguide is typically constructed from two sections to allow the OMT probes to be inserted into the waveguide. This break in the waveguide is a source of signal leakage and can lead to loss of performance and increased experimental systematic errors. Here we report on the development of new OMT-to-waveguide coupling structures with the goal of reducing leakage at the detector wafer interface. The pixel to pixel optical leakage due to the gap between the coupling waveguide and the backshort is reduced by means of a protrusion that passes through the OMT membrane and electrically connects the two waveguide sections on either side of the wafer. High frequency electromagnetic simulations indicate that these protrusions are an effective method to reduce optical leakage in the gap by ~80% percent, with a ~60% filling factor, relative to an standard OMT coupling architecture. Prototype devices have been designed to characterize the performance of the new design using a relative measurement with varying filling factors. We outline the simulation setup and results, and present a chip layout and sample box that will be used to perform the initial measurements. △ Less

Submitted 29 October, 2021; originally announced October 2021.

Comments: 6 pages, 4 figures, conference proceeding

Riordan arrays and Jacobi and Thron continued fractions

Authors: Paul Barry

Abstract: We show that certain Riordan arrays have generating functions that can be expressed as continued fractions of Jacobi and Thron type. We investigate the inverses of such arrays, which in certain circumstances can also have generating functions representable as continued fractions. Links to orthogonal polynomial moment sequences, and to Laurent biorthogonal polynomials are developed. We show that ce… ▽ More We show that certain Riordan arrays have generating functions that can be expressed as continued fractions of Jacobi and Thron type. We investigate the inverses of such arrays, which in certain circumstances can also have generating functions representable as continued fractions. Links to orthogonal polynomial moment sequences, and to Laurent biorthogonal polynomials are developed. We show that certain Riordan group involutions can be defined by continued fractions. We also show how simple transformations of the Jacobi continued fractions can lead to exponential Riordan arrays. Finally, by way of contrast, we look at the case of some non Riordan arrays that are of combinatorial significance, including the Narayana numbers. △ Less

Submitted 15 September, 2021; originally announced September 2021.

Comments: 31 pages

MSC Class: Primary 15B36; Secondary 05A15; 11B83; 11J70; 11A55; 42C05

On the partial sums of Riordan arrays

Authors: Paul Barry

Abstract: We define two notions of partial sums of a Riordan array, corresponding respectively to the partial sums of the rows and the partial sums of the columns of the Riordan array in question. We characterize the matrices that arise from these operations. On the one hand, we obtain a new Riordan array, while on the other hand, we obtain a rectangular array which has an inverse that is a lower Hessenberg… ▽ More We define two notions of partial sums of a Riordan array, corresponding respectively to the partial sums of the rows and the partial sums of the columns of the Riordan array in question. We characterize the matrices that arise from these operations. On the one hand, we obtain a new Riordan array, while on the other hand, we obtain a rectangular array which has an inverse that is a lower Hessenberg matrix. We examine the structure of these Hessenberg matrices. We end with a generalization linked to the Fibonacci numbers and phyllotaxis. △ Less

Submitted 30 August, 2021; originally announced August 2021.

Comments: 23 pages

MSC Class: Primary 11B50; Secondary 05A15; 11B83; 11C20; 11Y55; 15B36

Global QCD Analysis of Pion Parton Distributions with Threshold Resummation

Authors: P. C. Barry, Chueng-Ryong Ji, N. Sato, W. Melnitchouk

Abstract: We perform the first global QCD analysis of pion valence, sea quark, and gluon distributions within a Bayesian Monte Carlo framework with threshold resummation on Drell-Yan cross sections at next-to-leading log accuracy. Exploring various treatments of resummation, we find that the large-$x$ asymptotics of the valence quark distribution $\sim (1-x)^{β_v}$ can differ significantly, with $β_v$ rangi… ▽ More We perform the first global QCD analysis of pion valence, sea quark, and gluon distributions within a Bayesian Monte Carlo framework with threshold resummation on Drell-Yan cross sections at next-to-leading log accuracy. Exploring various treatments of resummation, we find that the large-$x$ asymptotics of the valence quark distribution $\sim (1-x)^{β_v}$ can differ significantly, with $β_v$ ranging from $\approx 1$ to $> 2.5$ at the input scale. Regardless of the specific implementation, however, the resummation induced redistribution of the momentum between valence quarks and gluons boosts the total momentum carried by gluons to $\approx 40\%$, increasing the gluon contribution to the pion mass to $\approx 40$ MeV. △ Less

Submitted 30 November, 2021; v1 submitted 12 August, 2021; originally announced August 2021.

Comments: 6 pages, 3 figures

Report number: JLAB-THY-21-3482

Journal ref: Phys. Rev. Lett. 127, 232001 (2021)

Series reversion with Jacobi and Thron continued fractions

Authors: Paul Barry

Abstract: Using ordinary and exponential generating functions, we explore the reversion of power series defined by $2$nd order recurrences. We express the reversions in terms of Jacobi and Thron continued fractions. We find relations with Eulerian expressions using a transformation of continued fractions. Using ordinary and exponential generating functions, we explore the reversion of power series defined by $2$nd order recurrences. We express the reversions in terms of Jacobi and Thron continued fractions. We find relations with Eulerian expressions using a transformation of continued fractions. △ Less

Submitted 29 July, 2021; originally announced July 2021.

Comments: 26 Pages

MSC Class: Primary 05A15; Secondary 11B39; 11B83; 1536; 30B10; 30B70

Conjectures and results on some generalized Rueppel sequences

Authors: Paul Barry

Abstract: In this note we use the analogy between the Catalan sequence and the Rueppel sequence to derive a variety of conjectures surrounding the Hankel transforms of a number of sequences closely related to the Rueppel sequence. Use is made of the representation of suitable generating functions by Stieltjes continued fractions. We define polynomial sequences by introducing parameters that define generaliz… ▽ More In this note we use the analogy between the Catalan sequence and the Rueppel sequence to derive a variety of conjectures surrounding the Hankel transforms of a number of sequences closely related to the Rueppel sequence. Use is made of the representation of suitable generating functions by Stieltjes continued fractions. We define polynomial sequences by introducing parameters that define generalized Rueppel sequences, and we show that such polynomials have coefficient arrays that are Riordan arrays. Finally we conjecture the form of a product of Hankel transforms arising from the Rueppel sequence. △ Less

Submitted 4 July, 2021; v1 submitted 1 July, 2021; originally announced July 2021.

Comments: 16 pages

MSC Class: Primary 11B50; Secondary 05A15; 11B83; 11C20; 11Y55; 15B36

The Design and Integrated Performance of SPT-3G

Authors: J. A. Sobrin, A. J. Anderson, A. N. Bender, B. A. Benson, D. Dutcher, A. Foster, N. Goeckner-Wald, J. Montgomery, A. Nadolski, A. Rahlin, P. A. R. Ade, Z. Ahmed, E. Anderes, M. Archipley, J. E. Austermann, J. S. Avva, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant , et al. (98 additional authors not shown)

Abstract: SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, mill… ▽ More SPT-3G is the third survey receiver operating on the South Pole Telescope dedicated to high-resolution observations of the cosmic microwave background (CMB). Sensitive measurements of the temperature and polarization anisotropies of the CMB provide a powerful dataset for constraining cosmology. Additionally, CMB surveys with arcminute-scale resolution are capable of detecting galaxy clusters, millimeter-wave bright galaxies, and a variety of transient phenomena. The SPT-3G instrument provides a significant improvement in map** speed over its predecessors, SPT-SZ and SPTpol. The broadband optics design of the instrument achieves a 430 mm diameter image plane across observing bands of 95 GHz, 150 GHz, and 220 GHz, with 1.2 arcmin FWHM beam response at 150 GHz. In the receiver, this image plane is populated with 2690 dual-polarization, tri-chroic pixels (~16000 detectors) read out using a 68X digital frequency-domain multiplexing readout system. In 2018, SPT-3G began a multiyear survey of 1500 deg$^{2}$ of the southern sky. We summarize the unique optical, cryogenic, detector, and readout technologies employed in SPT-3G, and we report on the integrated performance of the instrument. △ Less

Submitted 25 February, 2022; v1 submitted 21 June, 2021; originally announced June 2021.

Comments: 25 pages, 11 figures. Accepted for publication in ApJS

Report number: FERMILAB-PUB-21-291-AE

Journal ref: ApJS 258 42 (2022)

Retrieving Quality Factors for Reflection & Transmission Measurements

Authors: Juliang Li, P. Barry, C. Chang

Abstract: This article presents pedagogical explanation of retrieving the resonance parameters $Q_{L}$, $Q_{o}$ and $Q_{c}$ from both reflection and transmission measurement of microwave resonator. Here $Q_{L}$ stands for the total or loaded quality factor (Q), $Q_{o}$ is the internal Q and $Q_{c}$ is the coupling or external Q. Matlab Code based on the methods is available for download for direct calculati… ▽ More This article presents pedagogical explanation of retrieving the resonance parameters $Q_{L}$, $Q_{o}$ and $Q_{c}$ from both reflection and transmission measurement of microwave resonator. Here $Q_{L}$ stands for the total or loaded quality factor (Q), $Q_{o}$ is the internal Q and $Q_{c}$ is the coupling or external Q. Matlab Code based on the methods is available for download for direct calculation of the Qs.\cite{lighq} △ Less

Submitted 31 May, 2021; originally announced May 2021.

Design and performance of a multi-terahertz Fourier transform spectrometer for axion dark matter experiments

Authors: Kristin Dona, Jesse Liu, Noah Kurinsky, David Miller, Pete Barry, Clarence Chang, Andrew Sonnenschein

Abstract: Dedicated spectrometers for terahertz radiation with [0.3, 30] THz frequencies using traditional optomechanical interferometry are substantially less common than their infrared and microwave counterparts. This paper presents the design and initial performance measurements of a tabletop Fourier transform spectrometer (FTS) for multi-terahertz radiation using infrared optics in a Michelson arrangeme… ▽ More Dedicated spectrometers for terahertz radiation with [0.3, 30] THz frequencies using traditional optomechanical interferometry are substantially less common than their infrared and microwave counterparts. This paper presents the design and initial performance measurements of a tabletop Fourier transform spectrometer (FTS) for multi-terahertz radiation using infrared optics in a Michelson arrangement. This is coupled to a broadband pyroelectric photodetector designed for [0.1, 30] THz frequencies. We measure spectra of narrowband and broadband input radiation to characterize the performance of this instrument above 10 THz, where signal-to-noise is high. This paves the groundwork for planned upgrades to extend below 10 THz. We also briefly discuss potential astroparticle physics applications of such FTS instruments to broadband axion dark matter searches, whose signature comprises low-rate monochromatic photons with unknown frequency. △ Less

Submitted 14 April, 2021; originally announced April 2021.

Comments: 13 pages, 12 figures

On the Gap-sum and Gap-product Sequences of Integer Sequences

Authors: Paul Barry

Abstract: In this note, we explore two families of sequences associated to a suitable integer sequence: the gap-sum sequence and the gap-product sequence. These are the sums and the products of consecutive numbers not in the original sequence. We give closed forms for both, in terms of the original sequence, and in the case of Horadam sequences, we find the generating function of the gap-sum sequence. For s… ▽ More In this note, we explore two families of sequences associated to a suitable integer sequence: the gap-sum sequence and the gap-product sequence. These are the sums and the products of consecutive numbers not in the original sequence. We give closed forms for both, in terms of the original sequence, and in the case of Horadam sequences, we find the generating function of the gap-sum sequence. For some elementary sequences, we indicate that the gap-product sequences are given by the Fuss-Catalan-Raney numbers. △ Less

Submitted 7 April, 2021; originally announced April 2021.

Comments: 10 pages

MSC Class: Primary 11B83; Secondary 11B25; 11B37; 11B39

Centered polygon numbers, heptagons and nonagons, and the Robbins numbers

Authors: Paul Barry

Abstract: In this note, we explore certain determinantal descriptions of the Robbins numbers. Techniques used for this include continued fractions, Riordan arrays and series inversion. Proven and conjectured representations involve the determinants of both Hankel and symmetric matrices. In specific cases, links are drawn to centered polygonal numbers, and to heptagons and nonagons. We conjecture a Hankel tr… ▽ More In this note, we explore certain determinantal descriptions of the Robbins numbers. Techniques used for this include continued fractions, Riordan arrays and series inversion. Proven and conjectured representations involve the determinants of both Hankel and symmetric matrices. In specific cases, links are drawn to centered polygonal numbers, and to heptagons and nonagons. We conjecture a Hankel transform determinant for the Robbins numbers related to the Fibonacci and the Catalan numbers. △ Less

Submitted 7 April, 2021; v1 submitted 4 April, 2021; originally announced April 2021.

Comments: 46 pages. More examples added

MSC Class: Primary 05A05; Secondary 05A15; 15A15; 15B35; 11B83; 11C20

Performance and characterization of the SPT-3G digital frequency-domain multiplexed readout system using an improved noise and crosstalk model

Authors: J. Montgomery, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, M. Archipley, J. S. Avva, K. Aylor, L. Balkenhol, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, P. Chaubal, G. Chen , et al. (96 additional authors not shown)

Abstract: The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout op… ▽ More The third generation South Pole Telescope camera (SPT-3G) improves upon its predecessor (SPTpol) by an order of magnitude increase in detectors on the focal plane. The technology used to read out and control these detectors, digital frequency-domain multiplexing (DfMUX), is conceptually the same as used for SPTpol, but extended to accommodate more detectors. A nearly 5x expansion in the readout operating bandwidth has enabled the use of this large focal plane, and SPT-3G performance meets the forecasting targets relevant to its science objectives. However, the electrical dynamics of the higher-bandwidth readout differ from predictions based on models of the SPTpol system due to the higher frequencies used, and parasitic impedances associated with new cryogenic electronic architecture. To address this, we present an updated derivation for electrical crosstalk in higher-bandwidth DfMUX systems, and identify two previously uncharacterized contributions to readout noise, which become dominant at high bias frequency. The updated crosstalk and noise models successfully describe the measured crosstalk and readout noise performance of SPT-3G. These results also suggest specific changes to warm electronics component values, wire-harness properties, and SQUID parameters, to improve the readout system for future experiments using DfMUX, such as the LiteBIRD space telescope. △ Less

Submitted 21 February, 2022; v1 submitted 29 March, 2021; originally announced March 2021.

Comments: Accepted to the Journal of Astronomical Telescopes, Instruments, and Systems

Journal ref: J. Astron. Telesc. Instrum. Syst. 8(1) 014001 (8 January 2022)

Constraints on $Λ$CDM Extensions from the SPT-3G 2018 $EE$ and $TE$ Power Spectra

Authors: L. Balkenhol, D. Dutcher, P. A. R. Ade, Z. Ahmed, E. Anderes, A. J. Anderson, M. Archipley, J. S. Avva, K. Aylor, P. S. Barry, R. Basu Thakur, K. Benabed, A. N. Bender, B. A. Benson, F. Bianchini, L. E. Bleem, F. R. Bouchet, L. Bryant, K. Byrum, J. E. Carlstrom, F. W. Carter, T. W. Cecil, C. L. Chang, P. Chaubal, G. Chen , et al. (95 additional authors not shown)

Abstract: We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino ma… ▽ More We present constraints on extensions to the $Λ$CDM cosmological model from measurements of the $E$-mode polarization auto-power spectrum and the temperature-$E$-mode cross-power spectrum of the cosmic microwave background (CMB) made using 2018 SPT-3G data. The extensions considered vary the primordial helium abundance, the effective number of relativistic degrees of freedom, the sum of neutrino masses, the relativistic energy density and mass of a sterile neutrino, and the mean spatial curvature. We do not find clear evidence for any of these extensions, from either the SPT-3G 2018 dataset alone or in combination with baryon acoustic oscillation and \textit{Planck} data. None of these model extensions significantly relax the tension between Hubble-constant, $H_0$, constraints from the CMB and from distance-ladder measurements using Cepheids and supernovae. The addition of the SPT-3G 2018 data to \textit{Planck} reduces the square-root of the determinants of the parameter covariance matrices by factors of $1.3 - 2.0$ across these models, signaling a substantial reduction in the allowed parameter volume. We also explore CMB-based constraints on $H_0$ from combined SPT, \textit{Planck}, and ACT DR4 datasets. While individual experiments see some indications of different $H_0$ values between the $TT$, $TE$, and $EE$ spectra, the combined $H_0$ constraints are consistent between the three spectra. For the full combined datasets, we report $H_0 = 67.49 \pm 0.53\,\mathrm{km\,s^{-1}\,Mpc^{-1}}$, which is the tightest constraint on $H_0$ from CMB power spectra to date and in $4.1\,σ$ tension with the most precise distance-ladder-based measurement of $H_0$. The SPT-3G survey is planned to continue through at least 2023, with existing maps of combined 2019 and 2020 data already having $\sim3.5\times$ lower noise than the maps used in this analysis. △ Less

Submitted 25 March, 2021; originally announced March 2021.

Comments: Submitted to PRD; 19 pages, 7 figures

Journal ref: Phys. Rev. D 104, 083509 (2021)