-
Analytic approximations of scattering effects on beam chromaticity in 21-cm global experiments
Authors:
Alan E. E. Rogers,
John P. Barrett,
Judd D. Bowman,
Rigel Cappallo,
Colin J. Lonsdale,
Nivedita Mahesh,
Raul A. Monsalve,
Steven G. Murray,
Peter H. Sims
Abstract:
Scattering from objects near an antenna produce correlated signals from strong compact radio sources in a manner similar to those used by the Sea Interferometer to measure the radio source positions using the fine frequency structure in the total power spectrum of a single antenna. These fringes or ripples due to correlated signal interference are present at a low level in the spectrum of any sing…
▽ More
Scattering from objects near an antenna produce correlated signals from strong compact radio sources in a manner similar to those used by the Sea Interferometer to measure the radio source positions using the fine frequency structure in the total power spectrum of a single antenna. These fringes or ripples due to correlated signal interference are present at a low level in the spectrum of any single antenna and are a major source of systematics in systems used to measure the global redshifted 21-cm signal from the early universe. In the Sea Interferometer a single antenna on a cliff above the sea is used to add the signal from the direct path to the signal from the path reflected from the sea thereby forming an interferometer. This was used for map** radio sources with a single antenna by Bolton and Slee in the 1950s. In this paper we derive analytic expressions to determine the level of these ripples and compare these results in a few simple cases with electromagnetic modeling software to verify that the analytic calculations are sufficient to obtain the magnitude of the scattering effects on the measurements of the global 21-cm signal. These analytic calculations are needed to evaluate the magnitude of the effects in cases that are either too complex or take too much time to be modeled using software.
△ Less
Submitted 8 December, 2022;
originally announced December 2022.
-
A Bayesian approach to modelling spectrometer data chromaticity corrected using beam factors -- I. Mathematical formalism
Authors:
Peter H. Sims,
Judd D. Bowman,
Nivedita Mahesh,
Steven G. Murray,
John P. Barrett,
Rigel Cappallo,
Raul A. Monsalve,
Alan E. E. Rogers,
Titu Samson,
Akshatha K. Vydula
Abstract:
Accurately accounting for spectral structure in spectrometer data induced by instrumental chromaticity on scales relevant for detection of the 21-cm signal is among the most significant challenges in global 21-cm signal analysis. In the publicly available EDGES low-band data set, this complicating structure is suppressed using beam-factor based chromaticity correction (BFCC), which works by dividi…
▽ More
Accurately accounting for spectral structure in spectrometer data induced by instrumental chromaticity on scales relevant for detection of the 21-cm signal is among the most significant challenges in global 21-cm signal analysis. In the publicly available EDGES low-band data set, this complicating structure is suppressed using beam-factor based chromaticity correction (BFCC), which works by dividing the data by a sky-map-weighted model of the spectral structure of the instrument beam. Several analyses of this data have employed models that start with the assumption that this correction is complete. However, while BFCC mitigates the impact of instrumental chromaticity on the data, given realistic assumptions regarding the spectral structure of the foregrounds, the correction is only partial. This complicates the interpretation of fits to the data with intrinsic sky models (models that assume no instrumental contribution to the spectral structure of the data). In this paper, we derive a BFCC data model from an analytic treatment of BFCC and demonstrate using simulated observations that, in contrast to using an intrinsic sky model for the data, the BFCC data model enables unbiased recovery of a simulated global 21-cm signal from beam-factor chromaticity corrected data in the limit that the data is corrected with an error-free beam-factor model.
△ Less
Submitted 28 March, 2023; v1 submitted 7 December, 2022;
originally announced December 2022.
-
VLBI measurement of the vector baseline between geodetic antennas at Kokee Park Geophysical Observatory, Hawaii
Authors:
A. E. Niell,
J. P. Barrett,
R. J. Cappallo,
B. E. Corey,
P. Elosegui,
D. Mondal,
G. Rajagopalan,
C. A. Ruszczyk,
M. A. Titus
Abstract:
We measured the components of the 31-m-long vector between the two Very-Long-Baseline Interferometry (VLBI) antennas at the Kokee Park Geophysical Observatory (KPGO), Hawaii, with approximately 1 mm precision using phase-delay observables from dedicated VLBI observations in 2016 and 2018. The two KPGO antennas are the 20 m legacy VLBI antenna and the 12 m VLBI Global Observing System (VGOS) antenn…
▽ More
We measured the components of the 31-m-long vector between the two Very-Long-Baseline Interferometry (VLBI) antennas at the Kokee Park Geophysical Observatory (KPGO), Hawaii, with approximately 1 mm precision using phase-delay observables from dedicated VLBI observations in 2016 and 2018. The two KPGO antennas are the 20 m legacy VLBI antenna and the 12 m VLBI Global Observing System (VGOS) antenna. Independent estimates of the vector between the two antennas were obtained by the National Geodetic Survey (NGS) using standard optical surveys in 2015 and 2018. The uncertainties of the latter survey were 0.3 and 0.7 mm in the horizontal and vertical components of the baseline, respectively. We applied corrections to the measured positions for the varying thermal deformation of the antennas on the different days of the VLBI and survey measurements, which can amount to 1 mm, bringing all results to a common reference temperature. The difference between the VLBI and survey results are 0.2 +/- 0.4 mm, -1.3 +/- 0.4 mm, and 0.8 +/- 0.8 mm in the East, North, and Up topocentric components, respectively. We also estimate that the Up component of the baseline may suffer from systematic errors due to gravitational deformation and uncalibrated instrumental delay variations at the 20 m antenna that may reach +/-10 mm and -2 mm, respectively, resulting in an accuracy uncertainty on the order of 10 mm for the relative heights of the antennas. Furthermore, possible tilting of the 12 m antenna increases the uncertainties in the differences in the horizontal components to 1.0 mm. These results bring into focus the importance of (1) correcting to a common reference temperature the measurements of the reference points of all geodetic instruments within a site, (2) obtaining measurements of the gravitational deformation of all antennas, and (3) monitoring local motions of the geodetic instruments.
△ Less
Submitted 3 March, 2021;
originally announced March 2021.
-
Kassiopeia: A Modern, Extensible C++ Particle Tracking Package
Authors:
Daniel Furse,
Stefan Groh,
Nikolaus Trost,
Martin Babutzka,
John P. Barrett,
Jan Behrens,
Nicholas Buzinksy,
Thomas Corona,
Sanshiro Enomoto,
Moritz Erhard,
Joseph A. Formaggio,
Ferenc Glück,
Fabian Harms,
Florian Heizmann,
Daniel Hilk,
Wolfgang Käfer,
Marco Kleesiek,
Benjamin Leiber,
Susanne Mertens,
Noah S. Oblath,
Pascal Renschler,
Johannes Schwarz,
Penny L. Slocum,
Nancy Wandkowsky,
Kevin Wierman
, et al. (1 additional authors not shown)
Abstract:
The Kassiopeia particle tracking framework is an object-oriented software package using modern C++ techniques, written originally to meet the needs of the KATRIN collaboration. Kassiopeia features a new algorithmic paradigm for particle tracking simulations which targets experiments containing complex geometries and electromagnetic fields, with high priority put on calculation efficiency, customiz…
▽ More
The Kassiopeia particle tracking framework is an object-oriented software package using modern C++ techniques, written originally to meet the needs of the KATRIN collaboration. Kassiopeia features a new algorithmic paradigm for particle tracking simulations which targets experiments containing complex geometries and electromagnetic fields, with high priority put on calculation efficiency, customizability, extensibility, and ease of use for novice programmers. To solve Kassiopeia's target physics problem the software is capable of simulating particle trajectories governed by arbitrarily complex differential equations of motion, continuous physics processes that may in part be modeled as terms perturbing that equation of motion, stochastic processes that occur in flight such as bulk scattering and decay, and stochastic surface processes occuring at interfaces, including transmission and reflection effects. This entire set of computations takes place against the backdrop of a rich geometry package which serves a variety of roles, including initialization of electromagnetic field simulations and the support of state-dependent algorithm-swap** and behavioral changes as a particle's state evolves. Thanks to the very general approach taken by Kassiopeia it can be used by other experiments facing similar challenges when calculating particle trajectories in electromagnetic fields. It is publicly available at https://github.com/KATRIN-Experiment/Kassiopeia
△ Less
Submitted 1 December, 2016;
originally announced December 2016.
-
Commissioning of the vacuum system of the KATRIN Main Spectrometer
Authors:
M. Arenz,
M. Babutzka,
M. Bahr,
J. P. Barrett,
S. Bauer,
M. Beck,
A. Beglarian,
J. Behrens,
T. Bergmann,
U. Besserer,
J. Blümer,
L. I. Bodine,
K. Bokeloh,
J. Bonn,
B. Bornschein,
L. Bornschein,
S. Büsch,
T. H. Burritt,
S. Chilingaryan,
T. J. Corona,
L. De Viveiros,
P. J. Doe,
O. Dragoun,
G. Drexlin,
S. Dyba
, et al. (125 additional authors not shown)
Abstract:
The KATRIN experiment will probe the neutrino mass by measuring the beta-electron energy spectrum near the endpoint of tritium beta-decay. An integral energy analysis will be performed by an electro-static spectrometer (Main Spectrometer), an ultra-high vacuum vessel with a length of 23.2 m, a volume of 1240 m^3, and a complex inner electrode system with about 120000 individual parts. The strong m…
▽ More
The KATRIN experiment will probe the neutrino mass by measuring the beta-electron energy spectrum near the endpoint of tritium beta-decay. An integral energy analysis will be performed by an electro-static spectrometer (Main Spectrometer), an ultra-high vacuum vessel with a length of 23.2 m, a volume of 1240 m^3, and a complex inner electrode system with about 120000 individual parts. The strong magnetic field that guides the beta-electrons is provided by super-conducting solenoids at both ends of the spectrometer. Its influence on turbo-molecular pumps and vacuum gauges had to be considered. A system consisting of 6 turbo-molecular pumps and 3 km of non-evaporable getter strips has been deployed and was tested during the commissioning of the spectrometer. In this paper the configuration, the commissioning with bake-out at 300°C, and the performance of this system are presented in detail. The vacuum system has to maintain a pressure in the 10^{-11} mbar range. It is demonstrated that the performance of the system is already close to these stringent functional requirements for the KATRIN experiment, which will start at the end of 2016.
△ Less
Submitted 3 March, 2016;
originally announced March 2016.
-
The Spherical Multipole Expansion of a Triangle
Authors:
John P. Barrett,
Joseph A. Formaggio,
Thomas J. Corona
Abstract:
We describe a technique to analytically compute the multipole moments of a charge distribution confined to a planar triangle, which may be useful in solving the Laplace equation using the fast multipole boundary element method (FMBEM) and for charged particle tracking. This algorithm proceeds by performing the necessary integration recursively within a specific coordinate system, and then transfor…
▽ More
We describe a technique to analytically compute the multipole moments of a charge distribution confined to a planar triangle, which may be useful in solving the Laplace equation using the fast multipole boundary element method (FMBEM) and for charged particle tracking. This algorithm proceeds by performing the necessary integration recursively within a specific coordinate system, and then transforming the moments into the global coordinate system through the application of rotation and translation operators. This method has been implemented and found use in conjunction with a simple piecewise constant collocation scheme, but is generalizable to non-uniform charge densities. When applied to low aspect ratio ($\leq 100$) triangles and expansions with degree up to 32, it is accurate and efficient compared to simple two-dimensional Gauss-Legendre quadrature.
△ Less
Submitted 19 June, 2015; v1 submitted 21 March, 2014;
originally announced March 2014.
-
Phase Conjugation and Negative Refraction Using Nonlinear Active Metamaterials
Authors:
Alexander R. Katko,
Shi Gu,
John P. Barrett,
Bogdan-Ioan Popa,
Gennady Shvets,
Steven A. Cummer
Abstract:
We present experimental demonstration of phase conjugation using nonlinear metamaterial elements. Active split-ring resonators loaded with varactor diodes are demonstrated theoretically to act as phase-conjugating or time-reversing discrete elements when parametrically pumped and illuminated with appropriate frequencies. The metamaterial elements were fabricated and shown experimentally to produce…
▽ More
We present experimental demonstration of phase conjugation using nonlinear metamaterial elements. Active split-ring resonators loaded with varactor diodes are demonstrated theoretically to act as phase-conjugating or time-reversing discrete elements when parametrically pumped and illuminated with appropriate frequencies. The metamaterial elements were fabricated and shown experimentally to produce a time reversed signal. Measurements confirm that a discrete array of phase-conjugating elements act as a negatively-refracting time reversal RF lens only 0.12$λ$ thick.
△ Less
Submitted 11 August, 2010;
originally announced August 2010.