-
Minimum Feature Size Control in Level Set Topology Optimization via Density Fields
Authors:
Jorge L. Barrera,
Markus J. Geiss,
Kurt Maute
Abstract:
A level set topology optimization approach that uses an auxiliary density field to nucleate holes during the optimization process and achieves minimum feature size control in optimized designs is explored. The level set field determines the solid-void interface, and the density field describes the distribution of a fictitious porous material using the solid isotropic material with penalization. Th…
▽ More
A level set topology optimization approach that uses an auxiliary density field to nucleate holes during the optimization process and achieves minimum feature size control in optimized designs is explored. The level set field determines the solid-void interface, and the density field describes the distribution of a fictitious porous material using the solid isotropic material with penalization. These fields are governed by two sets of independent optimization variables which are initially coupled using a penalty for hole nucleation. The strength of the density field penalization and projection are gradually increased through the optimization process to promote a 0-1 density distribution. This treatment of the density field combined with a second penalty that regulates the evolution of the density field in the void phase, mitigate the appearance of small design features. The minimum feature size of optimized designs is controlled by the radius of the linear filter applied to the density optimization variables. The structural response is predicted by the extended finite element method, the sensitivities by the adjoint method, and the optimization variables are updated by a gradient-based optimization algorithm. Numerical examples investigate the robustness of this approach with respect to algorithmic parameters and mesh refinement. The results show the applicability of the combined density level set topology optimization approach for both optimal hole nucleation and for minimum feature size control in 2D and 3D. This comes, however, at the cost of a more advanced problem formulation and additional computational cost due to an increased number of optimization variables.
△ Less
Submitted 28 March, 2021; v1 submitted 26 March, 2021;
originally announced March 2021.
-
Ambiguous phase assignment of discretized 3D geometries in topology optimization
Authors:
Jorge L. Barrera,
Kurt Maute
Abstract:
Level set-based immersed boundary techniques operate on nonconforming meshes while providing a crisp definition of interface and external boundaries. In such techniques, an isocontour of a level set field interpolated from nodal level set values defines a problem's geometry. If the interface is explicitly tracked, the intersected elements are typically divided into sub-elements to which a phase ne…
▽ More
Level set-based immersed boundary techniques operate on nonconforming meshes while providing a crisp definition of interface and external boundaries. In such techniques, an isocontour of a level set field interpolated from nodal level set values defines a problem's geometry. If the interface is explicitly tracked, the intersected elements are typically divided into sub-elements to which a phase needs to be assigned. Due to loss of information in the discretization of the level set field, certain geometrical configurations allow for ambiguous phase assignment of sub-elements, and thus ambiguous definition of the interface. The study presented here focuses on analyzing these topological ambiguities in embedded geometries constructed from discretized level set fields on hexahedral meshes. The analysis is performed on three-dimensional problems where several intersection configurations can significantly affect the problem's topology. This is in contrast to two-dimensional problems where ambiguous topological features exist only in one intersection configuration and identifying and resolving them is straightforward. A set of rules that resolve these ambiguities for two-phase problems is proposed, and algorithms for their implementations are provided. The influence of these rules on the evolution of the geometry in the optimization process is investigated with linear elastic topology optimization problems. These problems are solved by an explicit level set topology optimization framework that uses the extended finite element method to predict physical responses. This study shows that the choice of a rule to resolve topological features can result in drastically different final geometries. However, for the problems studied in this paper, the performances of the optimized design do not differ.
△ Less
Submitted 20 February, 2020;
originally announced February 2020.
-
Hole Seeding in Level Set Topology Optimization via Density Fields
Authors:
Jorge L. Barrera,
Markus J. Geiss,
Kurt Maute
Abstract:
Two approaches that use a density field for seeding holes in level set topology optimization are proposed. In these approaches, the level set field describes the material-void interface while the density field describes the material distribution within the material phase. Both fields are optimized simultaneously by coupling them through either a single abstract design variable field or a penalty t…
▽ More
Two approaches that use a density field for seeding holes in level set topology optimization are proposed. In these approaches, the level set field describes the material-void interface while the density field describes the material distribution within the material phase. Both fields are optimized simultaneously by coupling them through either a single abstract design variable field or a penalty term introduced into the objective function. These approaches eliminate drawbacks of level set topology optimization methods that rely on seeding the initial design domain with a large number of holes. Instead, the proposed approaches insert holes during the optimization process where beneficial. The dependency of the optimization results on the initial hole pattern is reduced, and the computational costs are lowered by kee** the number of elements intersected by the material interface at a minimum. In comparison to level set methods that use topological derivatives to seed small holes at distinct steps in the optimization process, the proposed approaches introduce holes continuously during the optimization process, with the hole size and shape being optimized for the particular design problem. The proposed approaches are studied using the extended finite element method for spatial discretization, and the solid isotropic material with penalization for material interpolation using fictitious densities. Their robustness with respect to algorithmic parameters, dependency on the density penalization, and performance are examined through 2D and 3D benchmark linear elastic numerical examples, and a geometrically complex mass minimization with stress constraint design problem.
△ Less
Submitted 24 September, 2019;
originally announced September 2019.
-
Beginning of activity in 67P/Churyumov-Gerasimenko and predictions for 2014/5
Authors:
C. Snodgrass,
C. Tubiana,
D. M. Bramich,
K. Meech,
H. Boehnhardt,
L. Barrera
Abstract:
Comet 67P/Churyumov-Gerasimenko was selected in 2003 as the new target of the Rosetta mission. It has since been the subject of a detailed campaign of observations to characterise its nucleus and activity. Here we present previously unpublished data taken around the start of activity of the comet in 2007/8, before its last perihelion passage. We constrain the time of the start of activity, and com…
▽ More
Comet 67P/Churyumov-Gerasimenko was selected in 2003 as the new target of the Rosetta mission. It has since been the subject of a detailed campaign of observations to characterise its nucleus and activity. Here we present previously unpublished data taken around the start of activity of the comet in 2007/8, before its last perihelion passage. We constrain the time of the start of activity, and combine this with other data taken throughout the comet's orbit to make predictions for its likely behaviour during 2014/5 while Rosetta is operating. A considerable difficulty in observing 67P during the past years has been its position against crowded fields towards the Galactic centre for much of the time. The 2007/8 data presented here were particularly difficult, and the comet will once again be badly placed for Earth-based observations in 2014/5. We make use of the difference image analysis (DIA) technique, which is commonly used in variable star and exoplanet research, to remove background sources and extract images of the comet. In addition, we reprocess a large quantity of archival images of 67P covering its full orbit, to produce a heliocentric lightcurve. By using consistent reduction, measurement and calibration techniques we generate a remarkably clean lightcurve, which can be used to measure a brightness-distance relationship and to predict the future brightness of the comet. We determine that the comet was active around November 2007, at a pre-perihelion distance from the Sun of 4.3 AU. The comet will reach this distance, and probably become active again, in March 2014. We find that the dust brightness can be well described by Afρ\propto r^-3.2 pre-perihelion and r^-3.4 post-perihelion, and that the comet has a higher dust-to-gas ratio than average. A model fit to the photometric data suggests that only a small fraction (1.4%) of the surface is active.
△ Less
Submitted 30 July, 2013;
originally announced July 2013.
-
Basic parameters and properties of the rapidly rotating magnetic helium strong B star HR7355
Authors:
Th. Rivinius,
R. H. D. Townsend,
O. Kochukhov,
S. Štefl,
D. Baade,
L. Barrera,
Th. Szeifert
Abstract:
The spectral and magnetic properties and variability of the B2Vnp emission-line magnetosphere star HR7355 were analyzed. The object rotates at almost 90% of the critical value, meaning it is a magnetic star for which oblateness and gravity darkening effects cannot be ignored any longer. A detailed modeling of the photospheric parameters indicate that the star is significantly cooler than suggested…
▽ More
The spectral and magnetic properties and variability of the B2Vnp emission-line magnetosphere star HR7355 were analyzed. The object rotates at almost 90% of the critical value, meaning it is a magnetic star for which oblateness and gravity darkening effects cannot be ignored any longer. A detailed modeling of the photospheric parameters indicate that the star is significantly cooler than suggested by the B2 spectral type, with T_eff=17500K atypically cool for a star with a helium enriched surface. The spectroscopic variability of helium and metal lines due to the photospheric abundance pattern is far more complex than a largely dipolar, oblique magnetic field of about 11 to 12kG may suggest. Doppler imaging shows that globally the most He enriched areas coincide with the magnetic poles and metal enriched areas with the magnetic equator. While most of the stellar surface is helium enriched with respect to the solar value, some isolated patches are depleted. The stellar wind in the circumstellar environment is governed by the magnetic field, i.e. the stellar magnetosphere is rigidly corotating with the star. The magnetosphere of HR7355 is similar to the well known σOri E: the gas trapped in the magnetospheric clouds is fairly dense, and at the limit to being optically thick in the hydrogen emission. Apart from a different magnetic obliquity, HR7355 and the more recently identified HR5907 have virtually identical stellar and magnetic parameters.
△ Less
Submitted 1 November, 2012;
originally announced November 2012.
-
The (B0+?)+O6 system FN CMa: A case for tidal-pulsational interaction?
Authors:
Th. Rivinius,
O. Stahl,
S. Štefl,
D. Baade,
R. H. D. Townsend,
L. Barrera
Abstract:
FN CMa is visually double with a separation of about 0.6arcsec. Sixty high-cadence VLT/UVES spectra permit the A and B components to be disentangled, as the relative contribution of each star to the total light entering the spectrograph fluctuates between exposures due to changes in seeing. Component A exhibits rapid line-profile variations, leading us to attribute the photometric variability seen…
▽ More
FN CMa is visually double with a separation of about 0.6arcsec. Sixty high-cadence VLT/UVES spectra permit the A and B components to be disentangled, as the relative contribution of each star to the total light entering the spectrograph fluctuates between exposures due to changes in seeing. Component A exhibits rapid line-profile variations, leading us to attribute the photometric variability seen by HIPPARCOS (with a derived P=0.08866d) to this component. From a total of 122 archival and new echelle spectra it is shown that component A is an SB1 binary with an orbital period of 117.55 days. The eccentricity of 0.6 may result in tidal modulation of the pulsation(s) of component Aa.
△ Less
Submitted 17 September, 2010;
originally announced September 2010.
-
Magnetic field detection in the B2Vn star HR 7355
Authors:
Th. Rivinius,
Th. Szeifert,
L. Barrera,
R. H. D. Townsend,
S. Stefl,
D. Baade
Abstract:
The B2Vn star HR 7355 is found to be a He-rich magnetic star. Spectropolarimetric data were obtained with FORS1 at UT2 on Paranal observatory to measure the disk-averaged longitudinal magnetic field at various phases of the presumed 0.52 d cycle. A variable magnetic field with strengths between B_z = -2200 and +3200G was found, with confidence limits of 100 to 130G. The field topology is that of a…
▽ More
The B2Vn star HR 7355 is found to be a He-rich magnetic star. Spectropolarimetric data were obtained with FORS1 at UT2 on Paranal observatory to measure the disk-averaged longitudinal magnetic field at various phases of the presumed 0.52 d cycle. A variable magnetic field with strengths between B_z = -2200 and +3200G was found, with confidence limits of 100 to 130G. The field topology is that of an oblique dipole, while the star itself is seen about equator-on. In the intensity spectra the HeI-lines show the typical equivalent width variability of He-strong stars, usually attributed to surface abundance spots. The amplitudes of the equivalent width variability of the HeI lines are extraordinarily strong compared to other cases. These results not only put HR 7355 unambiguously among the early-type magnetic stars, but confirm its outstanding nature: With v sin i = 320 km/s the parameter space in which He-strong stars are known to exist has doubled in terms of rotational velocity.
△ Less
Submitted 18 March, 2010;
originally announced March 2010.
-
Observation of confined current ribbon in JET plasmas
Authors:
E. R. Solano,
P. J. Lomas,
B. Alper,
G. S. Xu,
Y. Andrew,
G. Arnoux,
A. Boboc,
L. Barrera,
P. Belo,
M. N. A. Beurskens,
M. Brix,
K. Crombe,
E. de la Luna,
S. Devaux,
T. Eich,
S. Gerasimov,
C. Giroud,
D. Harting,
D. Howell,
A. Huber,
G. Kocsis,
A. Korotkov,
A. Lopez-Fraguas,
M. F. F. Nave,
E. Rachlew
, et al. (7 additional authors not shown)
Abstract:
we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears sp…
▽ More
we report the identification of a localised current structure inside the JET plasma. It is a field aligned closed helical ribbon, carrying current in the same direction as the background current profile (co-current), rotating toroidally with the ion velocity (co-rotating). It appears to be located at a flat spot in the plasma pressure profile, at the top of the pedestal. The structure appears spontaneously in low density, high rotation plasmas, and can last up to 1.4 s, a time comparable to a local resistive time. It considerably delays the appearance of the first ELM.
△ Less
Submitted 30 October, 2009;
originally announced October 2009.
-
New BVRI photometry results on KBOs from the ESO VLT
Authors:
P. Santos-Sanz,
J. L. Ortiz,
L. Barrera,
H. Boehnhardt
Abstract:
Photometric surveys of transNeptunian objects (TNOs) and Centaurs have suggested possible correlations between some orbital parameters and surface colors of classical objects, scattered disk objects (SDOs), and Centaurs. However, larger sample sizes are needed in order to corroborate or rule out the possible correlations and find some possible new ones. We use VLT-FORS images through BVRI filter…
▽ More
Photometric surveys of transNeptunian objects (TNOs) and Centaurs have suggested possible correlations between some orbital parameters and surface colors of classical objects, scattered disk objects (SDOs), and Centaurs. However, larger sample sizes are needed in order to corroborate or rule out the possible correlations and find some possible new ones. We use VLT-FORS images through BVRI filters of 32 Kuiper Belt Objects (KBOs) and obtain their colors after proper reduction and calibration. We study the possible correlations merging these new measurements with the VLT published results from the ESO large program and with the latest published results of the Meudon Multicolor Survey via non-parametric statistical tests. We obtain a large dataset of 116 objects (classical, SDOs and Centaurs) and, in addition to confirming most of the correlations and conclusions reached in the literature, some possible new correlations are found. The most interesting ones are some correlations of color vs. orbital parameters for the different dynamical groups. We find that some correlations in the classical group, as well as the (dynamically) cold and hot subgroups depend on the size of the objects. As a by-product of our study, we were able to identify new candidates for light curve studies and found that ~55% of the objects showed variability above 0.15 mags. This is a higher value than what is found in other studies. Since our sample contains smaller objects than samples from other studies, this result might be an indication that the smaller TNOs are more elongated than the larger ones.
△ Less
Submitted 29 December, 2008; v1 submitted 24 December, 2008;
originally announced December 2008.
-
Dust observations of Comet 9P/Tempel 1 at the time of the Deep Impact
Authors:
G. P. Tozzi,
H. Boehnhardt,
L. Kolokolova,
T. Bonev,
E. Pompei,
S. Bagnulo,
N. Ageorges,
L. Barrera,
O. Hainaut,
H. U. Kaeufl,
F. Kerber,
G. LoCurto,
O. Marco,
E. Pantin,
H. Rauer,
I. Saviane,
C. Sterken,
M. Weiler
Abstract:
On 4 July 2005 at 05:52 UT, the impactor of NASA's Deep Impact (DI) mission crashed into comet 9P/Tempel 1 with a velocity of about 10 km/s. The material ejected by the impact expanded into the normal coma, produced by ordinary cometary activity.
The characteristics of the non-impact coma and cloud produced by the impact were studied by observations in the visible wavelengths and in the near-I…
▽ More
On 4 July 2005 at 05:52 UT, the impactor of NASA's Deep Impact (DI) mission crashed into comet 9P/Tempel 1 with a velocity of about 10 km/s. The material ejected by the impact expanded into the normal coma, produced by ordinary cometary activity.
The characteristics of the non-impact coma and cloud produced by the impact were studied by observations in the visible wavelengths and in the near-IR. The scattering characteristics of the "normal" coma of solid particles were studied by comparing images in various spectral regions, from the UV to the near-IR.
For the non-impact coma, a proxy of the dust production has been measured in various spectral regions. The presence of sublimating grains has been detected. Their lifetime was found to be about 11 hours. Regarding the cloud produced by the impact, the total geometric cross section multiplied by the albedo was measured as a function of the color and time. The projected velocity appeared to obey a Gaussian distribution with the average velocity of the order of 115 m/s. By comparing the observations taken about 3 hours after the impact, we have found a strong decrease in the cross section in J filter, while that in Ks remained almost constant. This is interpreted as the result of sublimation of grains dominated by particles of sizes of the order of some microns.
△ Less
Submitted 4 October, 2007;
originally announced October 2007.
-
Dynamical modeling of the Deep Impact dust ejecta cloud
Authors:
Tanyu Bonev,
Nancy Ageorges,
Stefano Bagnulo,
Luis Barrera,
Hermann Böhnhardt,
Olivier Hainaut,
Emmanuel Jehin,
Hans-Ullrich Käufl,
Florian Kerber,
Gaspare LoCurto,
Jean Manfroid,
Olivier Marco,
Eric Pantin,
Emanuela Pompei,
Ivo Saviane,
Fernando Selman,
Chris Sterken,
Heike Rauer,
Gian Paolo Tozzi,
Michael Weiler
Abstract:
The collision of Deep Impact with comet 9P/Tempel 1 generated a bright cloud of dust which dissipated during several days after the impact. The brightness variations of this cloud and the changes of its position and shape are governed by the physical properties of the dust grains. We use a Monte Carlo model to describe the evolution of the post-impact dust plume. The results of our dynamical sim…
▽ More
The collision of Deep Impact with comet 9P/Tempel 1 generated a bright cloud of dust which dissipated during several days after the impact. The brightness variations of this cloud and the changes of its position and shape are governed by the physical properties of the dust grains. We use a Monte Carlo model to describe the evolution of the post-impact dust plume. The results of our dynamical simulations are compared to the data obtained with FORS2, the FOcal Reducer and low dispersion Spectrograph for the VLT of the European Southern Observatory (ESO), to derive the particle size distribution and the total amount of material contained in the dust ejecta cloud.
△ Less
Submitted 21 March, 2007;
originally announced March 2007.
-
Constant of Motion for several one-dimensional systems and outlining the problem associated with getting their Hamiltonians
Authors:
G. López,
L. A. Barrera,
Y. Garibo,
H. Hernández,
J. C. Salazar,
C. A. Vargas
Abstract:
The constants of motion of the following systems are deduced: a relativistic particle with linear dissipation, a no-relativistic particle with a time explicitly depending force, a no-relativistic particle with a constant force and time depending mass, and a relativistic particle under a conservative force with position depending mass. The problem of getting the Hamiltonian for these systems is d…
▽ More
The constants of motion of the following systems are deduced: a relativistic particle with linear dissipation, a no-relativistic particle with a time explicitly depending force, a no-relativistic particle with a constant force and time depending mass, and a relativistic particle under a conservative force with position depending mass. The problem of getting the Hamiltonian for these systems is determined by getting the velocity as an explicit function of position and generalized linear momentum, and this problem can be solved a first approximation for the first above system.
△ Less
Submitted 5 February, 2004;
originally announced February 2004.
