-
Experimental end-to-end demonstration of intersatellite absolute ranging for LISA
Authors:
Kohei Yamamoto,
Iouri Bykov,
Jan Niklas Reinhardt,
Christoph Bode,
Pascal Grafe,
Martin Staab,
Narjiss Messied,
Myles Clark,
Germán Fernández Barranco,
Thomas S. Schwarze,
Olaf Hartwig,
Juan José Esteban Delgado,
Gerhard Heinzel
Abstract:
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on…
▽ More
The Laser Interferometer Space Antenna (LISA) is a gravitational wave detector in space. It relies on a post-processing technique named time-delay interferometry (TDI) to suppress the overwhelming laser frequency noise by several orders of magnitude. This algorithm requires intersatellite-ranging monitors to provide information on spacecraft separations. To fulfill this requirement, we will use on-ground observatories, optical sideband-sideband beatnotes, pseudo-random noise ranging (PRNR), and time-delay interferometric ranging (TDIR). This article reports on the experimental end-to-end demonstration of a hexagonal optical testbed used to extract absolute ranges via the optical sidebands, PRNR, and TDIR. These were applied for clock synchronization of optical beatnote signals sampled at independent phasemeters. We set up two possible PRNR processing schemes: Scheme 1 extracts pseudoranges from PRNR via a calibration relying on TDIR; Scheme 2 synchronizes all beatnote signals without TDIR calibration. The schemes rely on newly implemented monitors of local PRNR biases. After the necessary PRNR treatments (unwrap**, ambiguity resolution, bias correction, in-band jitter reduction, and/or calibration), Scheme 1 and 2 achieved ranging accuracies of 2.0 cm to 8.1 cm and 5.8 cm to 41.1 cm, respectively, below the classical 1 m mark with margins.
△ Less
Submitted 5 June, 2024;
originally announced June 2024.
-
Radiation Tolerance of Low-Noise Photoreceivers for the LISA Space Mission
Authors:
P. Colcombet,
N. Dinu-Jaeger,
C. Inguimbert,
T. Nuns,
S. Bruhier,
N. Christensen,
P. Hofverberg,
N. van Bakel,
M. van Beuzekom,
T. Mistry,
G. Visser,
D. Pascucci,
K. Izumi,
K. Komori,
G. Heinzel,
G. Fernández Barranco,
J. J. M. in t Zand,
P. Laubert,
M. Frericks
Abstract:
This study investigates the effects of space environmental radiation on the performance of InGaAs Quadrant Photodiodes (QPDs) and assesses their suitability for the Laser Interferometer Space Antenna (LISA) mission. QPDs of 1.0, 1.5 and 2.0 mm have been irradiated with 20 and 60 MeV protons, 0.5 and 1 MeV electrons, and Co$^{60}$ gamma. An exposure corresponding to a displacement damage equivalent…
▽ More
This study investigates the effects of space environmental radiation on the performance of InGaAs Quadrant Photodiodes (QPDs) and assesses their suitability for the Laser Interferometer Space Antenna (LISA) mission. QPDs of 1.0, 1.5 and 2.0 mm have been irradiated with 20 and 60 MeV protons, 0.5 and 1 MeV electrons, and Co$^{60}$ gamma. An exposure corresponding to a displacement damage equivalent fluence of $1.0 \times 10^{+12}$ p/cm$^2$ for 20 and 60 MeV protons and a total ionizing dose of 237 krad were applied, surpassing the anticipated radiation levels for the LISA mission by a factor of approximately five. Experiments were conducted to measure changes in QPD dark current, capacitance, and responsivity. The QPDs are integrated with a low-noise DC-coupled transimpedance amplifier to form the Photoreceiver (QPR). QPR noise and performance in an interferometric system like LISA were also measured. Although radiation impacted their dark current and responsivity, almost all QPDs met LISA's validation criteria and did not demonstrate any critical failure. These findings prove that the tested QPDs are promising candidates for LISA and other space-based missions.
△ Less
Submitted 15 October, 2023;
originally announced October 2023.
-
Single-element dual-interferometer for precision inertial sensing
Authors:
Yichao Yang,
Kohei Yamamoto,
Victor Huarcaya,
Christoph Vorndamme,
Daniel Penkert,
Germán Fernández Barranco,
Thomas S Schwarze,
Juan Jose Esteban Delgado,
Moritz Mehmet,
Jianjun Jia,
Gerhard Heinzel,
Miguel Dovale Álvarez
Abstract:
Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical…
▽ More
Tracking moving masses in several degrees of freedom with high precision and large dynamic range is a central aspect in many current and future gravitational physics experiments. Laser interferometers have been established as one of the tools of choice for such measurement schemes. Using sinusoidal phase modulation homodyne interferometry allows a drastic reduction of the complexity of the optical setup, a key limitation of multi-channel interferometry. By shifting the complexity of the setup to the signal processing stage, these methods enable devices with a size and weight not feasible using conventional techniques. In this paper we present the design of a novel sensor topology based on deep frequency modulation interferometry: the self-referenced single-element dual-interferometer (SEDI) inertial sensor, which takes simplification one step further by accommodating two interferometers in one optic. Using a combination of computer models and analytical methods we show that an inertial sensor with sub-picometer precision for frequencies above 10 mHz, in a package of a few cubic inches, seems feasible with our approach. Moreover we show that by combining two of these devices it is possible to reach sub-picometer precision down to 2 mHz. In combination with the given compactness, this makes the SEDI sensor a promising approach for applications in high precision inertial sensing for both next-generation space-based gravity missions employing drag-free control, and ground-based experiments employing inertial isolation systems with optical readout.
△ Less
Submitted 31 August, 2020; v1 submitted 7 August, 2020;
originally announced August 2020.
-
Optical suppression of tilt-to-length coupling in the LISA long-arm interferometer
Authors:
M Chwalla,
K Danzmann,
M Dovale Álvarez,
J J Esteban Delgado,
G Fernández Barranco,
E Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Lieser,
M Perreur-Lloyd,
D I Robertson,
J M Rohr,
S Schuster,
T S Schwarze,
M Tröbs,
G Wanner,
H Ward
Abstract:
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultr…
▽ More
The arm length and the isolation in space enable LISA to probe for signals unattainable on ground, opening a window to the sub-Hz gravitational-wave universe. The coupling of unavoidable angular spacecraft jitter into the longitudinal displacement measurement, an effect known as tilt-to-length (TTL) coupling, is critical for realizing the required sensitivity of picometer$/\sqrt{\rm{Hz}}$. An ultra-stable interferometer testbed has been developed in order to investigate this issue and validate mitigation strategies in a setup representative of LISA, and in this paper it is operated in the long-arm interferometer configuration. The testbed is fitted with a flat-top beam generator to simulate the beam received by a LISA spacecraft. We demonstrate a reduction of TTL coupling between this flat-top beam and a Gaussian reference beam via introducing two- and four-lens imaging systems. TTL coupling factors below $\pm 25\,μ$m/rad for beam tilts within $\pm 300\,μ$rad are obtained by careful optimization of the system. Moreover we show that the additional TTL coupling due to lateral alignment errors of elements of the imaging system can be compensated by introducing lateral shifts of the detector, and vice versa. These findings help validate the suitability of this noise-reduction technique for the LISA long-arm interferometer.
△ Less
Submitted 5 June, 2020; v1 submitted 13 February, 2020;
originally announced February 2020.
-
On orbit performance of the GRACE Follow-On Laser Ranging Interferometer
Authors:
Klaus Abich,
Claus Braxmaier,
Martin Gohlke,
Josep Sanjuan,
Alexander Abramovici,
Brian Bachman Okihiro,
David C. Barr,
Maxime P. Bize,
Michael J. Burke,
Ken C. Clark,
Glenn de Vine,
Jeffrey A. Dickson,
Serge Dubovitsky,
William M. Folkner,
Samuel Francis,
Martin S. Gilbert,
Mark Katsumura,
William Klipstein,
Kameron Larsen,
Carl Christian Liebe,
Jehhal Liu,
Kirk McKenzie,
Phillip R. Morton,
Alexander T. Murray,
Don J. Nguyen
, et al. (58 additional authors not shown)
Abstract:
The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degree of freedom two-way laser link between remote spacecr…
▽ More
The Laser Ranging Interferometer (LRI) instrument on the Gravity Recovery and Climate Experiment (GRACE) Follow-On mission has provided the first laser interferometric range measurements between remote spacecraft, separated by approximately 220 km. Autonomous controls that lock the laser frequency to a cavity reference and establish the 5 degree of freedom two-way laser link between remote spacecraft succeeded on the first attempt. Active beam pointing based on differential wavefront sensing compensates spacecraft attitude fluctuations. The LRI has operated continuously without breaks in phase tracking for more than 50 days, and has shown biased range measurements similar to the primary ranging instrument based on microwaves, but with much less noise at a level of $1\,{\rm nm}/\sqrt{\rm Hz}$ at Fourier frequencies above 100 mHz.
△ Less
Submitted 28 June, 2019;
originally announced July 2019.
-
Picometer-stable hexagonal optical bench to verify LISA phase extraction linearity and precision
Authors:
Thomas S. Schwarze,
Germán Fernández Barranco,
Daniel Penkert,
Marina Kaufer,
Oliver Gerberding,
Gerhard Heinzel
Abstract:
The Laser Interferometer Space Antenna (LISA) and its metrology chain have to fulfill stringent performance requirements to enable the space-based detection of gravitational waves. This implies the necessity of performance verification methods. In particular, the extraction of the interferometric phase, implemented by a phasemeter, needs to be probed for linearity and phase noise contributions. Th…
▽ More
The Laser Interferometer Space Antenna (LISA) and its metrology chain have to fulfill stringent performance requirements to enable the space-based detection of gravitational waves. This implies the necessity of performance verification methods. In particular, the extraction of the interferometric phase, implemented by a phasemeter, needs to be probed for linearity and phase noise contributions. This Letter reports on a hexagonal quasimonolithic optical bench implementing a three-signal test for this purpose. Its characterization as sufficiently stable down to picometer levels is presented as well as its usage for a benchmark phasemeter performance measurement under LISA conditions. These results make it a candidate for the core of a LISA metrology verification facility.
△ Less
Submitted 17 April, 2019; v1 submitted 1 October, 2018;
originally announced October 2018.
-
Reducing tilt-to-length coupling for the LISA test mass interferometer
Authors:
M Tröbs,
S Schuster,
M Lieser,
M Zwetz,
M Chwalla,
K Danzmann,
G Fernandez Barranco,
E D Fitzsimons,
O Gerberding,
G Heinzel,
C J Killow,
M Perreur-Lloyd,
D I Robertson,
T S Schwarze,
G Wanner,
H Ward
Abstract:
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this is a potential noise source for both the test mass interferometer and the long-arm interferometer. We have experimentally investigated TTL coupling in a setup r…
▽ More
Objects sensed by laser interferometers are usually not stable in position or orientation. This angular instability can lead to a coupling of angular tilt to apparent longitudinal displacement -- tilt-to-length coupling (TTL). In LISA this is a potential noise source for both the test mass interferometer and the long-arm interferometer. We have experimentally investigated TTL coupling in a setup representative for the LISA test mass interferometer and used this system to characterise two different imaging systems (a two-lens design and a four-lens design) both designed to minimise TTL coupling. We show that both imaging systems meet the LISA requirement of +-25 um/rad for interfering beams with relative angles of up to +-300 urad. Furthermore, we found a dependency of the TTL coupling on beam properties such as the waist size and location, which we characterised both theoretically and experimentally.
△ Less
Submitted 23 November, 2017;
originally announced November 2017.
-
Towards the LISA Backlink: Experiment design for comparing optical phase reference distribution systems
Authors:
Katharina-Sophie Isleif,
Lea Bischof,
Stefan Ast,
Daniel Penkert,
Thomas S Schwarze,
Germán Fernández Barranco,
Max Zwetz,
Sonja Veith,
Jan-Simon Hennig,
Michael Tröbs,
Jens Reiche,
Oliver Gerberding,
Karsten Danzmann,
Gerhard Heinzel
Abstract:
LISA is a proposed space-based laser interferometer detecting gravitational waves by measuring distances between free-floating test masses housed in three satellites in a triangular constellation with laser links in-between. Each satellite contains two optical benches that are articulated by moving optical subassemblies for compensating the breathing angle in the constellation. The phase reference…
▽ More
LISA is a proposed space-based laser interferometer detecting gravitational waves by measuring distances between free-floating test masses housed in three satellites in a triangular constellation with laser links in-between. Each satellite contains two optical benches that are articulated by moving optical subassemblies for compensating the breathing angle in the constellation. The phase reference distribution system, also known as backlink, forms an optical bi-directional path between the intra-satellite benches.
In this work we discuss phase reference implementations with a target non-reciprocity of at most $2π\,\mathrm{μrad/\sqrt{Hz}}$, equivalent to $1\,\mathrm{pm/\sqrt{Hz}}$ for a wavelength of $1064\,\mathrm{nm}$ in the frequency band from $0.1\,\mathrm{mHz}$ to $1\,\mathrm{Hz}$. One phase reference uses a steered free beam connection, the other one a fiber together with additional laser frequencies. The noise characteristics of these implementations will be compared in a single interferometric set-up with a previously successfully tested direct fiber connection. We show the design of this interferometer created by optical simulations including ghost beam analysis, component alignment and noise estimation. First experimental results of a free beam laser link between two optical set-ups that are co-rotating by $\pm 1^\circ$ are presented. This experiment demonstrates sufficient thermal stability during rotation of less than $10^{-4}\,\mathrm{K/\sqrt{Hz}}$ at $1\,\mathrm{mHz}$ and operation of the free beam steering mirror control over more than 1 week.
△ Less
Submitted 12 January, 2018; v1 submitted 19 September, 2017;
originally announced September 2017.
-
Design and construction of an optical test bed for LISA imaging systems and tilt-to-length coupling
Authors:
Michael Chwalla,
Karsten Danzmann,
Germán Fernández Barranco,
Ewan Fitzsimons,
Oliver Gerberding,
Gerhard Heinzel,
Christian J Killow,
Maike Lieser,
Michael Perreur-Lloyd,
David I Robertson,
Sönke Schuster,
Thomas S Schwarze,
Michael Tröbs,
Henry Ward,
Max Zwetz
Abstract:
The Laser Interferometer Space Antenna (LISA) is a future space-based interferometric gravitational-wave detector consisting of three spacecraft in a triangular configuration. The interferometric measurements of path length changes between satellites will be performed on optical benches in the satellites. Angular misalignments of the interfering beams couple into the length measurement and represe…
▽ More
The Laser Interferometer Space Antenna (LISA) is a future space-based interferometric gravitational-wave detector consisting of three spacecraft in a triangular configuration. The interferometric measurements of path length changes between satellites will be performed on optical benches in the satellites. Angular misalignments of the interfering beams couple into the length measurement and represent a significant noise source. Imaging systems will be used to reduce this tilt-to-length coupling.
We designed and constructed an optical test bed to experimentally investigate tilt-to-length coupling. It consists of two separate structures, a minimal optical bench and a telescope simulator. The minimal optical bench comprises the science interferometer where the local laser is interfered with light from a remote spacecraft. In our experiment, a simulated version of this received beam is generated on the telescope simulator. The telescope simulator provides a tilting beam, a reference interferometer and an additional static beam as a phase reference. The tilting beam can either be a flat-top beam or a Gaussian beam. We avoid tilt-to-length coupling in the reference interferometer by using a small photo diode placed at an image of the beam rotation point. We show that the test bed is operational with an initial measurement of tilt-to-length coupling without imaging systems.
Furthermore, we show the design of two different imaging systems whose performance will be investigated in future experiments.
△ Less
Submitted 2 December, 2016; v1 submitted 1 July, 2016;
originally announced July 2016.
-
The Gravitational Universe
Authors:
The eLISA Consortium,
:,
P. Amaro Seoane,
S. Aoudia,
H. Audley,
G. Auger,
S. Babak,
J. Baker,
E. Barausse,
S. Barke,
M. Bassan,
V. Beckmann,
M. Benacquista,
P. L. Bender,
E. Berti,
P. Binétruy,
J. Bogenstahl,
C. Bonvin,
D. Bortoluzzi,
N. C. Brause,
J. Brossard,
S. Buchman,
I. Bykov,
J. Camp,
C. Caprini
, et al. (136 additional authors not shown)
Abstract:
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in th…
▽ More
The last century has seen enormous progress in our understanding of the Universe. We know the life cycles of stars, the structure of galaxies, the remnants of the big bang, and have a general understanding of how the Universe evolved. We have come remarkably far using electromagnetic radiation as our tool for observing the Universe. However, gravity is the engine behind many of the processes in the Universe, and much of its action is dark. Opening a gravitational window on the Universe will let us go further than any alternative. Gravity has its own messenger: Gravitational waves, ripples in the fabric of spacetime. They travel essentially undisturbed and let us peer deep into the formation of the first seed black holes, exploring redshifts as large as z ~ 20, prior to the epoch of cosmic re-ionisation. Exquisite and unprecedented measurements of black hole masses and spins will make it possible to trace the history of black holes across all stages of galaxy evolution, and at the same time constrain any deviation from the Kerr metric of General Relativity. eLISA will be the first ever mission to study the entire Universe with gravitational waves. eLISA is an all-sky monitor and will offer a wide view of a dynamic cosmos using gravitational waves as new and unique messengers to unveil The Gravitational Universe. It provides the closest ever view of the early processes at TeV energies, has guaranteed sources in the form of verification binaries in the Milky Way, and can probe the entire Universe, from its smallest scales around singularities and black holes, all the way to cosmological dimensions.
△ Less
Submitted 24 May, 2013;
originally announced May 2013.