-
Reduced-Order Model of Power Converters to Optimize Power Hardware-In-the-Loop Technology in Dc-Distributed Systems
Authors:
Marina Sanz,
Daniel Santamargarita,
Francisco Huerta,
Diego Ochoa,
Antonio Lazaro,
Andres Barrado
Abstract:
The Power Hardware-In-the-Loop (PHIL) technology provides a powerful tool for testing scenarios where there is a high-power interchange, in which the performance of field tests can be very complex or expensive. When performing PHIL simulations of systems with a high number of components, such as DC-distributed systems on a ship or aircraft, the use of switched or average models of the converters c…
▽ More
The Power Hardware-In-the-Loop (PHIL) technology provides a powerful tool for testing scenarios where there is a high-power interchange, in which the performance of field tests can be very complex or expensive. When performing PHIL simulations of systems with a high number of components, such as DC-distributed systems on a ship or aircraft, the use of switched or average models of the converters can require the use of expensive commercial real-time digital simulators (RTDS) reducing the advantages of these technology. This paper is focused on the proposal of a reduced order model of converters to be able to perform PHIL analysis of Dc-distributed systems using low resources of the required real-time digital simulator. The paper validates that the proposed reduced-order model is able to determine the stability on the Dc-distributed system in comparison with more complex converter models. Moreover, a comparison between both models regarding the required resources in the implementation in a commercial RTDS platform is performed to validate the benefits of the proposed model in performing PHIL analysis of large power distribution systems.
△ Less
Submitted 31 January, 2024;
originally announced January 2024.
-
Extension of the Injected-Absorbed-Current Method applied to DC-DC Converters with Input Filter, Output Post-filter and Feedforward Compensations
Authors:
Diego Ochoa,
Antonio Lazaro,
Pablo Zumel,
Cristina Fernandez,
Marina Sanz,
Jorge Rodriguez,
Andres Barrado
Abstract:
In railway applications, it is common to use an LC filter connected between the catenary and the input port of the main converter of the auxiliary and traction systems. In addition, in the auxiliary systems, there is a converter operating as a battery charger, which requires a very low ripple in the output current and output voltage, so a postfilter may be placed at the output port of the converte…
▽ More
In railway applications, it is common to use an LC filter connected between the catenary and the input port of the main converter of the auxiliary and traction systems. In addition, in the auxiliary systems, there is a converter operating as a battery charger, which requires a very low ripple in the output current and output voltage, so a postfilter may be placed at the output port of the converter. This article proposes a step-by-step methodology to extend the injected-absorbed-current (IAC) method in order to obtain transfer functions that consider the effects of the input filter, output postfilter, and some feedforward compensations. The proposed methodology allows reusing the characteristic coefficients of the DC-DC converter model derived from the existing IAC method. One of the advantages of the proposed methodology is that the transfer functions obtained in this article are valid for cases where both, one or none of the filters, are implemented. Finally, for the experimental validation of the proposed methodology, the phase-shifted full-bridge converter was selected as a convenient example. Furthermore, the experimental measurements have been performed on two prototypes.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Analysis, design, and implementation of the AFZ converter applied to photovoltaic systems
Authors:
David Lopez del Moral,
Andres Barrado,
Marina Sanz,
Antonio Lazaro,
Pablo Zumel
Abstract:
Grid-tied photovoltaic (PV) installations with Distributed Maximum Power Point Tracking (DMPPT) architectures include a DC-DC Module Integrated Converter (MIC) for managing each PV panel, isolating it from the others, reducing the mismatching effect and maximizing the harvested power. In this paper, the Autotransformer Forward converter with type-Zeta resonant reset (AFZ) is proposed as a DMPPT ar…
▽ More
Grid-tied photovoltaic (PV) installations with Distributed Maximum Power Point Tracking (DMPPT) architectures include a DC-DC Module Integrated Converter (MIC) for managing each PV panel, isolating it from the others, reducing the mismatching effect and maximizing the harvested power. In this paper, the Autotransformer Forward converter with type-Zeta resonant reset (AFZ) is proposed as a DMPPT architecture MIC candidate. The main characteristics of the AFZ converter are the high versatility due to its voltage step-up and step-down capability; the use of an optimized autotransformer with only two windings, reducing the complexity and power losses of this component; the good dynamic performances, like the Forward converter ones; the low number of components and the simplicity and high feasibility associated to the use of just one active switch. Besides, soft switching transitions are achieved thanks to the autotransformer type-Zeta resonant reset. The steady-state theoretical analysis, considering the effect of the autotransformer leakage inductance, is presented. The converter is also studied in the frequency domain, obtaining the small-signal transfer functions. A design procedure based on the requirements of a 100 kW grid-tied photovoltaic installation is described, yielding in a 225 W prototype with efficiencies up to 95.6 %. Experimental results validate the theoretical analysis.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Analysis and implementation of the Buck-Boost Modified Series Forward converter applied to photovoltaic systems
Authors:
David Lopez del Moral,
Andres Barrado,
Marina Sanz,
Antonio Lazaro,
Pablo Zumel
Abstract:
The mismatching phenomenon is one of the main issues in photovoltaic (PV) applications. It could reduce the generated power of a string when a PV panel has different performances from the other PV panels connected to the same string. Distributed Maximum Power Point Tracking (DMPPT) architectures are one of the most promising solutions to overcome the drawbacks associated with mismatching phenomena…
▽ More
The mismatching phenomenon is one of the main issues in photovoltaic (PV) applications. It could reduce the generated power of a string when a PV panel has different performances from the other PV panels connected to the same string. Distributed Maximum Power Point Tracking (DMPPT) architectures are one of the most promising solutions to overcome the drawbacks associated with mismatching phenomena in PV applications. In this kind of architectures, a DC-DC module integrated converter (MIC) manages each PV panel, isolating it from the rest of the PV panels, for harvesting the maximum available power from the Sun. Due to the high number of DCDC converters used in a grid-tied PV installation, the most desired MIC requirements are high efficiency, low cost and the capability of voltage step-up and step-down. This paper proposes the Buck-Boost Modified Forward (BBMSF) converter as a good candidate to be applied in DMPPT architectures. A complete analysis of the BBMSF converter is carried out, including the steady-state analysis as well as the small signal analysis in continuous conduction mode. The main advantages of the BBMSF converter are its step-up and step-down voltage transfer function; a higher simplicity, since it only includes a single controlled switch; the soft switching characteristics in all the diodes and MOSFET, reaching in some cases ZVS and ZCS, and yielding high efficiencies; the use of an autotransformer, with better performances than a typical Forward transformer; and the good dynamic performance, like the Forward converter ones. The theoretical analyses are validated through the experimental results in a 225 W BBMSF prototype designed and built under the requirements of a 100 kW grid-tied PV installation, achieving an efficiency up to 93.6%.
△ Less
Submitted 24 January, 2024;
originally announced January 2024.
-
Mass determinations of the three mini-Neptunes transiting TOI-125
Authors:
L. D. Nielsen,
D. Gandolfi,
D. J. Armstrong,
J. S. Jenkins,
M. Fridlund,
N. C. Santos,
F. Dai,
V. Adibekyan,
R. Luque,
J. H. Steffen,
M. Esposito,
F. Meru,
S. Sabotta,
E. Bolmont,
D. Kossakowski,
J. F. Otegi,
F. Murgas,
M. Stalport,
F. ~Rodler,
M. R. Díaz,
N. T. ~Kurtovic,
G. Ricker,
R. Vanderspek,
D. W. Latham,
S. Seager
, et al. (55 additional authors not shown)
Abstract:
The Transiting Exoplanet Survey Satellite, TESS, is currently carrying out an all-sky search for small planets transiting bright stars. In the first year of the TESS survey, steady progress was made in achieving the mission's primary science goal of establishing bulk densities for 50 planets smaller than Neptune. During that year, TESS's observations were focused on the southern ecliptic hemispher…
▽ More
The Transiting Exoplanet Survey Satellite, TESS, is currently carrying out an all-sky search for small planets transiting bright stars. In the first year of the TESS survey, steady progress was made in achieving the mission's primary science goal of establishing bulk densities for 50 planets smaller than Neptune. During that year, TESS's observations were focused on the southern ecliptic hemisphere, resulting in the discovery of three mini-Neptunes orbiting the star TOI-125, a V=11.0 K0 dwarf. We present intensive HARPS radial velocity observations, yielding precise mass measurements for TOI-125b, TOI-125c and TOI-125d. TOI-125b has an orbital period of 4.65 days, a radius of $2.726 \pm 0.075 ~\mathrm{R_{\rm E}}$, a mass of $ 9.50 \pm 0.88 ~\mathrm{M_{\rm E}}$ and is near the 2:1 mean motion resonance with TOI-125c at 9.15 days. TOI-125c has a similar radius of $2.759 \pm 0.10 ~\mathrm{R_{\rm E}}$ and a mass of $ 6.63 \pm 0.99 ~\mathrm{M_{\rm E}}$, being the puffiest of the three planets. TOI-125d, has an orbital period of 19.98 days and a radius of $2.93 \pm 0.17~\mathrm{R_{\rm E}}$ and mass $13.6 \pm 1.2 ~\mathrm{M_{\rm E}}$. For TOI-125b and TOI-125d we find unusual high eccentricities of $0.19\pm 0.04$ and $0.17^{+0.08}_{-0.06}$, respectively. Our analysis also provides upper mass limits for the two low-SNR planet candidates in the system; for TOI-125.04 ($R_P=1.36 ~\mathrm{R_{\rm E}}$, $P=$0.53 days) we find a $2σ$ upper mass limit of $1.6~\mathrm{M_{\rm E}}$, whereas TOI-125.05 ( $R_P=4.2^{+2.4}_{-1.4} ~\mathrm{R_{\rm E}}$, $P=$ 13.28 days) is unlikely a viable planet candidate with upper mass limit $2.7~\mathrm{M_{\rm E}}$. We discuss the internal structure of the three confirmed planets, as well as dynamical stability and system architecture for this intriguing exoplanet system.
△ Less
Submitted 23 January, 2020;
originally announced January 2020.
-
Radon and material radiopurity assessment for the NEXT double beta decay experiment
Authors:
S. Cebrián,
J. Pérez,
I. Bandac,
L. Labarga,
V. Álvarez,
A. I. Barrado,
A. Bettini,
F. I. G. M. Borges,
M. Camargo,
S. Cárcel,
A. Cervera,
C. A. N. Conde,
E. Conde,
T. Dafni,
J. Díaz,
R. Esteve,
L. M. P. Fernandes,
M. Fernández,
P. Ferrario,
E. D. C. Freitas,
L. M. P. Fernandes,
V. M. Gehman,
A. Goldschmidt,
J. J. Gómez-Cadenas,
D. González-Díaz
, et al. (46 additional authors not shown)
Abstract:
The Neutrino Experiment with a Xenon TPC (NEXT), intended to investigate the neutrinoless double beta decay using a high-pressure xenon gas TPC filled with Xe enriched in 136Xe at the Canfranc Underground Laboratory in Spain, requires ultra-low background conditions demanding an exhaustive control of material radiopurity and environmental radon levels. An extensive material screening process is un…
▽ More
The Neutrino Experiment with a Xenon TPC (NEXT), intended to investigate the neutrinoless double beta decay using a high-pressure xenon gas TPC filled with Xe enriched in 136Xe at the Canfranc Underground Laboratory in Spain, requires ultra-low background conditions demanding an exhaustive control of material radiopurity and environmental radon levels. An extensive material screening process is underway for several years based mainly on gamma-ray spectroscopy using ultra-low background germanium detectors in Canfranc but also on mass spectrometry techniques like GDMS and ICPMS. Components from shielding, pressure vessel, electroluminescence and high voltage elements and energy and tracking readout planes have been analyzed, hel** in the final design of the experiment and in the construction of the background model. The latest measurements carried out will be presented and the implication on NEXT of their results will be discussed. The commissioning of the NEW detector, as a first step towards NEXT, has started in Canfranc; in-situ measurements of airborne radon levels were taken there to optimize the system for radon mitigation and will be shown too.
△ Less
Submitted 26 May, 2015;
originally announced May 2015.
-
Radiopurity assessment of the tracking readout for the NEXT double beta decay experiment
Authors:
S. Cebrián,
J. Pérez,
I. Bandac,
L. Labarga,
V. Álvarez,
A. I. Barrado,
A. Bettini,
F. I. G. M. Borges,
M. Camargo,
S. Cárcel,
A. Cervera,
C. A. N. Conde,
E. Conde,
T. Dafni,
J. Díaz,
R. Esteve,
L. M. P. Fernandes,
M. Fernández,
P. Ferrario,
A. L. Ferreira,
E. D. C. Freitas,
V. M. Gehman,
A. Goldschmidt,
J. J. Gómez-Cadenas,
D. González-Díaz
, et al. (46 additional authors not shown)
Abstract:
The Neutrino Experiment with a Xenon Time-Projection Chamber (NEXT) is intended to investigate the neutrinoless double beta decay of 136Xe, which requires a severe suppression of potential backgrounds; therefore, an extensive screening and selection process is underway to control the radiopurity levels of the materials to be used in the experimental set-up of NEXT. The detector design combines the…
▽ More
The Neutrino Experiment with a Xenon Time-Projection Chamber (NEXT) is intended to investigate the neutrinoless double beta decay of 136Xe, which requires a severe suppression of potential backgrounds; therefore, an extensive screening and selection process is underway to control the radiopurity levels of the materials to be used in the experimental set-up of NEXT. The detector design combines the measurement of the topological signature of the event for background discrimination with the energy resolution optimization. Separate energy and tracking readout planes are based on different sensors: photomultiplier tubes for calorimetry and silicon multi-pixel photon counters for tracking. The design of a radiopure tracking plane, in direct contact with the gas detector medium, was specially challenging since the needed components like printed circuit boards, connectors, sensors or capacitors have typically, according to available information in databases and in the literature, activities too large for experiments requiring ultra-low background conditions. Here, the radiopurity assessment of tracking readout components based on gamma-ray spectroscopy using ultra-low background germanium detectors at the Laboratorio Subterraneo de Canfranc (Spain) is described. According to the obtained results, radiopure enough printed circuit boards made of kapton and copper, silicon photomultipliers and other required components, fulfilling the requirement of an overall background level in the region of interest of at most 8 10-4 counts keV-1 kg-1 y-1, have been identified.
△ Less
Submitted 15 June, 2015; v1 submitted 5 November, 2014;
originally announced November 2014.
