-
Nonlinear clogging of a rectangular slit by a spherical soft particle
Authors:
Charles Paul Moore,
Julien Husson,
Arezki Boudaoud,
Gabriel Amselem,
Charles N. Baroud
Abstract:
The capture of a soft spherical particle by a rectangular slit leads to a non-monotonic pressure-flow rate relation at low Reynolds number. In the presence of the trapped particle the flow-induced deformations focus the streamlines and pressure drop to a small region. This increases the resistance to flow by several orders of magnitude as the driving pressure is increased. As a result two regimes…
▽ More
The capture of a soft spherical particle by a rectangular slit leads to a non-monotonic pressure-flow rate relation at low Reynolds number. In the presence of the trapped particle the flow-induced deformations focus the streamlines and pressure drop to a small region. This increases the resistance to flow by several orders of magnitude as the driving pressure is increased. As a result two regimes are observed: a flow-dominated regime for small particle deformations, where flow rate increases with pressure, and an elastic-dominated regime in which solid deformations block the flow.
△ Less
Submitted 4 July, 2022;
originally announced July 2022.
-
Rheotaxis of chiral bacteria: from single-cell behavior to a population-level description
Authors:
Gustave Ronteix,
Christophe Josserand,
Adélaïde Lety-Stefanka,
Charles N. Baroud,
Gabriel Amselem
Abstract:
Due to their morphology, the dynamics of bacteria suspended in media can exhibit complex behaviors. In the presence of a shear, swimming bacteria experience a drift perpendicular to the shear plane. This drift, termed rheotaxis, is studied here semi-analytically, numerically and experimentally. We find the dependency of bacterial orientation and bacterial speed on the shear rate, in the presence o…
▽ More
Due to their morphology, the dynamics of bacteria suspended in media can exhibit complex behaviors. In the presence of a shear, swimming bacteria experience a drift perpendicular to the shear plane. This drift, termed rheotaxis, is studied here semi-analytically, numerically and experimentally. We find the dependency of bacterial orientation and bacterial speed on the shear rate, in the presence of rotational diffusion. This enables us to show that the drift speed of bacteria perpendicular to the shear is predominantly due to bacterial propulsion, and not rheotactic forces. Comparing the drift speed of bacteria and diffusion leads to the definition of a Péclet number. The rheotactic effect increases with the shear, reaching a plateau at very large Péclet numbers, in good agreement with experiments of rheotaxis performed in microfluidic droplets.
△ Less
Submitted 17 March, 2022;
originally announced April 2022.
-
Monitoring the orientation of rare-earth-doped nanorods for flow shear tomography
Authors:
Jongwook Kim,
Sebastien Michelin,
Michiel Gilberts,
Lucio Martinelli,
Elodie Chaudan,
Gabriel Amselem,
Etienne Fradet,
Jean Pierre Boilot,
Albert M. Brouwer,
Charles N. Baroud,
Jacques Peretti,
Thierry Gacoin
Abstract:
Rare-earth phosphors exhibit unique luminescence polarization features originating from the anisotropic symmetry of the emitter ion's chemical environment. However, to take advantage of this peculiar property, it is necessary to control and measure the ensemble orientation of the host particles with a high degree of precision. Here, we show a methodology to obtain the photoluminescence polarizatio…
▽ More
Rare-earth phosphors exhibit unique luminescence polarization features originating from the anisotropic symmetry of the emitter ion's chemical environment. However, to take advantage of this peculiar property, it is necessary to control and measure the ensemble orientation of the host particles with a high degree of precision. Here, we show a methodology to obtain the photoluminescence polarization of Eu-doped LaPO4 nano rods assembled in an electrically modulated liquid-crystalline phase. We measure Eu3+ emission spectra for the three main optimal configurations (σ, π and α, depending on the direction of observation and the polarization axes) and use them as a reference for the nano rod orientation analysis. Based on the fact that flowing nano rods tend to orient along the shear strain profile, we use this orientation analysis to measure the local shear rate in a flowing liquid. The potential of this approach is then demonstrated through tomographic imaging of the shear rate distribution in a microfluidic system.
△ Less
Submitted 6 December, 2017;
originally announced December 2017.
-
Breaking anchored droplets in a microfluidic Hele-Shaw cell
Authors:
Gabriel Amselem,
P. T. Brun,
François Gallaire,
Charles N. Baroud
Abstract:
We study microfluidic self digitization in Hele-Shaw cells using pancake droplets anchored to surface tension traps. We show that above a critical flow rate, large anchored droplets break up to form two daughter droplets, one of which remains in the anchor. Below the critical flow velocity for breakup the shape of the anchored drop is given by an elastica equation that depends on the capillary num…
▽ More
We study microfluidic self digitization in Hele-Shaw cells using pancake droplets anchored to surface tension traps. We show that above a critical flow rate, large anchored droplets break up to form two daughter droplets, one of which remains in the anchor. Below the critical flow velocity for breakup the shape of the anchored drop is given by an elastica equation that depends on the capillary number of the outer fluid. As the velocity crosses the critical value, the equation stops admitting a solution that satisfies the boundary conditions; the drop breaks up in spite of the neck still having finite width. A similar breaking event also takes place between the holes of an array of anchors, which we use to produce a 2D array of stationary drops in situ.
△ Less
Submitted 6 April, 2015;
originally announced April 2015.
-
Quantitative analysis of the drip** and jetting regimes in co-flowing capillary jets
Authors:
María Luisa Cordero,
François Gallaire,
Charles N. Baroud
Abstract:
We study a liquid jet that breaks up into drops in an external co-flowing liquid inside a confining microfluidic geometry. The jet breakup can occur right after the nozzle in a phenomenon named drip** or through the generation of a liquid jet that breaks up a long distance from the nozzle, which is called jetting. Traditionally, these two regimes have been considered to reflect the existence of…
▽ More
We study a liquid jet that breaks up into drops in an external co-flowing liquid inside a confining microfluidic geometry. The jet breakup can occur right after the nozzle in a phenomenon named drip** or through the generation of a liquid jet that breaks up a long distance from the nozzle, which is called jetting. Traditionally, these two regimes have been considered to reflect the existence of two kinds of spatiotemporal instabilities of a fluid jet, the drip** regime corresponding to an absolutely unstable jet and the jetting regime to a convectively unstable jet. Here, we present quantitative measurements of the drip** and jetting regimes, both in an unforced and a forced state, and compare these measurements with recent theoretical studies of spatiotemporal instability of a confined liquid jet in a co-flowing liquid. In the unforced state, the frequency of oscillation and breakup of the liquid jet is measured and compared to the theoretical predictions. The dominant frequency of the jet oscillations as a function of the inner flow rate agrees qualitatively with the theoretical predictions in the jetting regime but not in the drip** regime. In the forced state, achieved with periodic laser heating, the drip** regime is found to be insensitive to the perturbation and the frequency of drop formation remains unaltered. The jetting regime, on the contrary, amplifies the externally imposed frequency, which translates in the formation of drops at the frequency imposed by the external forcing. In conclusion, the drip** and jetting regimes are found to exhibit the main features of absolutely and convectively unstable flows respectively, but the frequency selection in the drip** regime is not ruled by the absolute frequency predicted by the stability analysis.
△ Less
Submitted 29 September, 2011; v1 submitted 10 November, 2010;
originally announced November 2010.
-
Tip streaming from drops flowing in a spiral microchannel
Authors:
Simon Molesin,
Charles N. Baroud
Abstract:
This fluid dynamics video shows drops of water being transported by a mean flow of oil, in a microchannel shaped as a logarithmic spiral. The channel shape means that the drops are submitted to an increasing shear and elongation as they flow nearer to the center of the spiral. A critical point is reached at which a long singular tail is observed behind the drops, indicating that the drops are ac…
▽ More
This fluid dynamics video shows drops of water being transported by a mean flow of oil, in a microchannel shaped as a logarithmic spiral. The channel shape means that the drops are submitted to an increasing shear and elongation as they flow nearer to the center of the spiral. A critical point is reached at which a long singular tail is observed behind the drops, indicating that the drops are accelerating. This is called "Tip streaming".
△ Less
Submitted 9 October, 2008;
originally announced October 2008.
-
Thermocapillary valve for droplet production and sorting
Authors:
C. N. Baroud,
J. -P. Delville,
F. Gallaire,
R. Wunenburger
Abstract:
Droplets are natural candidates for use as microfluidic reactors, if active control of their formation and transport can be achieved. We show here that localized heating from a laser can block the motion of a water-oil interface, acting as a microfluidic valve for two-phase flows. A theoretical model is developed to explain the forces acting on a drop due to thermocapillary flow, predicting a sc…
▽ More
Droplets are natural candidates for use as microfluidic reactors, if active control of their formation and transport can be achieved. We show here that localized heating from a laser can block the motion of a water-oil interface, acting as a microfluidic valve for two-phase flows. A theoretical model is developed to explain the forces acting on a drop due to thermocapillary flow, predicting a scaling law which favors miniaturization. Finally, we show how the laser forcing can be applied to sorting drops, thus demonstrating how it may be integrated in complex droplet microfluidic systems.
△ Less
Submitted 17 November, 2006;
originally announced November 2006.
-
Capillary origami: spontaneous wrap** of a droplet with an elastic sheet
Authors:
C. Py,
P. Reverdy,
L. Doppler,
J. Bico,
B. Roman,
C. N. Baroud
Abstract:
The interaction between elasticity and capillarity is used to produce three dimensional structures, through the wrap** of a liquid droplet by a planar sheet. The final encapsulated 3D shape is controlled by tayloring the initial geometry of the flat membrane. A 2D model shows the evolution of open sheets to closed structures and predicts a critical length scale below which encapsulation cannot…
▽ More
The interaction between elasticity and capillarity is used to produce three dimensional structures, through the wrap** of a liquid droplet by a planar sheet. The final encapsulated 3D shape is controlled by tayloring the initial geometry of the flat membrane. A 2D model shows the evolution of open sheets to closed structures and predicts a critical length scale below which encapsulation cannot occur, which is verified experimentally. This {\it elastocapillary length} is found to depend on the thickness as $h^{3/2}$, a scaling favorable to miniaturization which suggests a new way of mass production of 3D micro- or nano-scale objects.
△ Less
Submitted 27 November, 2006;
originally announced November 2006.
-
Reaction-diffusion dynamics: confrontation between theory and experiment in a microfluidic reactor
Authors:
Charles N. Baroud,
Fridolin Okkels,
Laure Menetrier,
Patrick Tabeling
Abstract:
We confront, quantitatively, the theoretical description of the reaction-diffusion of a second order reaction to experiment. The reaction at work is \ca/CaGreen, and the reactor is a T-shaped microchannel, 10 $μ$m deep, 200 $μ$m wide, and 2 cm long. The experimental measurements are compared with the two-dimensional numerical simulation of the reaction-diffusion equations. We find good agreement…
▽ More
We confront, quantitatively, the theoretical description of the reaction-diffusion of a second order reaction to experiment. The reaction at work is \ca/CaGreen, and the reactor is a T-shaped microchannel, 10 $μ$m deep, 200 $μ$m wide, and 2 cm long. The experimental measurements are compared with the two-dimensional numerical simulation of the reaction-diffusion equations. We find good agreement between theory and experiment. From this study, one may propose a method of measurement of various quantities, such as the kinetic rate of the reaction, in conditions yet inaccessible to conventional methods.
△ Less
Submitted 7 July, 2003; v1 submitted 27 August, 2002;
originally announced August 2002.
-
Anomalous self-similarity in two-dimensional turbulence
Authors:
Charles N. Baroud,
Brendan B. Plapp,
Zhen-Su She,
Harry L. Swinney
Abstract:
Our velocity measurements on a quasi-two-dimensional turbulent flow in a rapidly rotating annulus yield an inverse cascade with E(k)~k^{-2} rather than the expected E(k)~k^{-5/3}. The probability distribution functions for longitudinal velocity differences, δ_v(r)=v(x+r)-v(x), are self-similar (scale independent) but strongly non-Gaussian, which suggests that the coherent vortices play a signifi…
▽ More
Our velocity measurements on a quasi-two-dimensional turbulent flow in a rapidly rotating annulus yield an inverse cascade with E(k)~k^{-2} rather than the expected E(k)~k^{-5/3}. The probability distribution functions for longitudinal velocity differences, δ_v(r)=v(x+r)-v(x), are self-similar (scale independent) but strongly non-Gaussian, which suggests that the coherent vortices play a significant role. The structure functions, <[δ_v(r)]^p>~r^{ζ_p}, exhibit anomalous scaling: ζ_p=p/2 rather than ζ_p=p/3 as in the 1941 Kolmogorov theory.
△ Less
Submitted 27 July, 2001; v1 submitted 18 April, 2001;
originally announced April 2001.
