-
The effects of superconductor-stabilizer interfacial resistance on quench of a pancake coil made out of coated conductor
Authors:
G. A. Levin,
W. A. Jones,
K. A. Novak,
P. N. Barnes
Abstract:
We present the results of numerical analysis of normal zone propagation in a stack of $YBa_2Cu_3O_{7-x}$ coated conductors which imitates a pancake coil. Our main purpose is to determine whether the quench protection quality of such coils can be substantially improved by increased contact resistance between the superconducting film and the stabilizer. We show that with increased contact resistance…
▽ More
We present the results of numerical analysis of normal zone propagation in a stack of $YBa_2Cu_3O_{7-x}$ coated conductors which imitates a pancake coil. Our main purpose is to determine whether the quench protection quality of such coils can be substantially improved by increased contact resistance between the superconducting film and the stabilizer. We show that with increased contact resistance the speed of normal zone propagation increases, the detection of a normal zone inside the coil becomes possible earlier, when the peak temperature inside the normal zone is lower, and stability margins shrink. Thus, increasing contact resistance may become a viable option for improving the prospects of coated conductors for high $T_c$ magnets applications.
△ Less
Submitted 28 July, 2010; v1 submitted 21 July, 2010;
originally announced July 2010.
-
Use of 2G coated conductors for efficient shielding of DC magnetic fields
Authors:
J. -F. Fagnard,
M. Dirickx,
G. A. Levin,
P. N. Barnes,
B. Vanderheyden,
P. Vanderbemden
Abstract:
This paper reports the results of an experimental investigation of the performance of two types of magnetic screens assembled from YBa2Cu3O7-d (YBCO) coated conductors. Since effective screening of the axial DC magnetic field requires the unimpeded flow of an azimuthal persistent current, we demonstrate a configuration of a screening shell made out of standard YBCO coated conductor capable to acco…
▽ More
This paper reports the results of an experimental investigation of the performance of two types of magnetic screens assembled from YBa2Cu3O7-d (YBCO) coated conductors. Since effective screening of the axial DC magnetic field requires the unimpeded flow of an azimuthal persistent current, we demonstrate a configuration of a screening shell made out of standard YBCO coated conductor capable to accomplish that. The screen allows the persistent current to flow in the predominantly azimuthal direction at a temperature of 77 K. The persistent screen, incorporating a single layer of superconducting film, can attenuate an external magnetic field of up to 5 mT by more than an order of magnitude. For comparison purposes, another type of screen which incorporates low critical temperature quasi-persistent joints was also built. The shielding technique we describe here appears to be especially promising for the realization of large scale high-Tc superconducting screens.
△ Less
Submitted 17 June, 2010;
originally announced June 2010.
-
The effects of superconductor-stabilizer interfacial resistance on quench of current-carrying coated conductor
Authors:
G. A. Levin,
P. N. Barnes,
K. A. Novak
Abstract:
We present the results of numerical analysis of a model of normal zone propagation in coated conductors. The main emphasis is on the effects of increased contact resistance between the superconducting film and the stabilizer on the speed of normal zone propagation, the maximum temperature rise inside the normal zone, and the stability margins. We show that with increasing contact resistance the…
▽ More
We present the results of numerical analysis of a model of normal zone propagation in coated conductors. The main emphasis is on the effects of increased contact resistance between the superconducting film and the stabilizer on the speed of normal zone propagation, the maximum temperature rise inside the normal zone, and the stability margins. We show that with increasing contact resistance the speed of normal zone propagation increases, the maximum temperature inside the normal zone decreases, and stability margins shrink. This may have an overall beneficial effect on quench protection quality of coated conductors. We also briefly discuss the propagation of solitons and development of the temperature modulation along the wire.
△ Less
Submitted 28 September, 2009;
originally announced September 2009.
-
Emergence of dissipative structures in current-carrying superconducting wires
Authors:
G. A. Levin,
P. N. Barnes,
J. P. Rodriguez,
J. A. Connors,
J. S. Bulmer
Abstract:
We discuss the emergence of a spontaneous temperature and critical current spatial modulation in current-carrying high temperature superconducting wire. The modulation of the critical current along the wire on a scale of 3 - 10 mm forces a fraction of the transport current to crisscross the resistive interface between the superconducting film and normal metal stabilizer attached to it. This gene…
▽ More
We discuss the emergence of a spontaneous temperature and critical current spatial modulation in current-carrying high temperature superconducting wire. The modulation of the critical current along the wire on a scale of 3 - 10 mm forces a fraction of the transport current to crisscross the resistive interface between the superconducting film and normal metal stabilizer attached to it. This generates additional heat that allows such a structure to be self sustainable. Stability and the conditions for experimental observation of this phenomenon are also discussed.
△ Less
Submitted 22 April, 2009;
originally announced April 2009.
-
Stability and normal zone propagation speed in YBCO coated conductors with increased interfacial resistance
Authors:
George A. Levin,
Paul N. Barnes,
Jose P. Rodriguez,
Jake A. Connors,
John S. Bulmer
Abstract:
We will discuss how stability and speed of normal zone propagation in YBCO-coated conductors is affected by interfacial resistance between the superconducting film and the stabilizer. Our numerical simulation has shown that the increased interfacial resistance substantially increases speed of normal zone propagation and decreases the stability margins. Optimization of the value of the resistance…
▽ More
We will discuss how stability and speed of normal zone propagation in YBCO-coated conductors is affected by interfacial resistance between the superconducting film and the stabilizer. Our numerical simulation has shown that the increased interfacial resistance substantially increases speed of normal zone propagation and decreases the stability margins. Optimization of the value of the resistance may lead to a better compromise between stability and quench protection requirements than what is found in currently manufactured coated conductors.
△ Less
Submitted 4 November, 2008; v1 submitted 25 August, 2008;
originally announced August 2008.
-
In-Field Critical Current of Type-II Superconductors Caused by Strain from Nano-scale Columnar Inclusions
Authors:
J. P. Rodriguez,
P. N. Barnes,
C. V. Varanasi
Abstract:
The results of a linear elasticity analysis yields that nano-rod inclusions aligned along the c axis of a thin film of YBa2Cu3O{7-delta}, such as BaZrO3 and BaSnO3, squeeze that matrix by pure shear. The sensitivity of the superconducting critical temperature in that material to the latter implies that the phase boundary separating the nano-rod inclusion from the superconductor acts as a collect…
▽ More
The results of a linear elasticity analysis yields that nano-rod inclusions aligned along the c axis of a thin film of YBa2Cu3O{7-delta}, such as BaZrO3 and BaSnO3, squeeze that matrix by pure shear. The sensitivity of the superconducting critical temperature in that material to the latter implies that the phase boundary separating the nano-rod inclusion from the superconductor acts as a collective pinning center for the vortex lattice that appears in external magnetic field. A dominant contribution to the in-field critical current can result. The elasticity analysis also finds that the growth of nano-rod inclusions can be weakly metastable when the inclusion is softer than the matrix.
△ Less
Submitted 21 October, 2008; v1 submitted 2 April, 2008;
originally announced April 2008.
-
Normal zone in $YBa_2Cu_3O_{6+x}$-coated conductors
Authors:
George A. Levin,
Paul N. Barnes
Abstract:
We consider the distribution of an electric field in YBCO-coated conductors for a situation in which the DC transport current is forced into the copper stabilizer due to a weak link -- a section of the superconducting film with a critical current less than the transport current. The electric field in the metal substrate is also discussed. The results are compared with recent experiments on norma…
▽ More
We consider the distribution of an electric field in YBCO-coated conductors for a situation in which the DC transport current is forced into the copper stabilizer due to a weak link -- a section of the superconducting film with a critical current less than the transport current. The electric field in the metal substrate is also discussed. The results are compared with recent experiments on normal zone propagation in coated conductors for which the substrate and stabilizer are insulated from each other. The potential difference between the substrate and stabilizer, and the electric field in the substrate outside the normal zone can be accounted for by a large screening length in the substrate, comparable to the length of the sample. During a quench, the electric field inside the interface between YBCO and stabilizer, as well as in the buffer layer, can be several orders of magnitude greater than the longitudinal macroscopic electric field inside the normal zone. We speculate on the possibility of using possible microscopic electric discharges caused by this large ($\sim $kV/cm) electric field as a means to detect a quench.
△ Less
Submitted 27 June, 2007;
originally announced June 2007.
-
Current sharing between superconducting film and normal metal
Authors:
George A. Levin,
Paul N. Barnes,
John S. Bulmer
Abstract:
A two-dimensional model is introduced that describes current sharing between the superconducting and normal metal layers in configuration typical of YBCO-coated conductors. The model is used to compare the effectiveness of surround stabilizer and more conventional one-sided stabilizer. When the resistance of the interface between the superconductor and stabilizer is low enough, the surround stab…
▽ More
A two-dimensional model is introduced that describes current sharing between the superconducting and normal metal layers in configuration typical of YBCO-coated conductors. The model is used to compare the effectiveness of surround stabilizer and more conventional one-sided stabilizer. When the resistance of the interface between the superconductor and stabilizer is low enough, the surround stabilizer is less effective than the one-sided stabilizer in stabilizing a hairline crack in the superconducting film.
△ Less
Submitted 7 March, 2007;
originally announced March 2007.
-
AC-Tolerant Multifilament Coated Conductors
Authors:
G. A. Levin,
P. N. Barnes,
N. Amemiya
Abstract:
We report the magnetization losses in an experimental multifilament coated conductor. A 4 mm wide and 10 cm long YBCO coated conductor was subdivided into eight 0.5 mm wide filaments by laser ablation and subjected to post-ablation treatment. As the result, the hysteresis loss was reduced, as expected, in proportion to the width of the filaments. However, the coupling loss was reduced dramatical…
▽ More
We report the magnetization losses in an experimental multifilament coated conductor. A 4 mm wide and 10 cm long YBCO coated conductor was subdivided into eight 0.5 mm wide filaments by laser ablation and subjected to post-ablation treatment. As the result, the hysteresis loss was reduced, as expected, in proportion to the width of the filaments. However, the coupling loss was reduced dramatically, and became practically negligible, in the range of a sweep rate up to 20 T/s. This represents a drastic improvement on previous multifilament conductors in which often the coupling losses became equal to the hysteresis loss at a sweep rate as low as 3-4 T/s. These results demonstrate that there is an effective and practical way to suppress coupling losses in coated multifilament conductors.
△ Less
Submitted 19 September, 2006;
originally announced September 2006.
-
Multifilament YBa2Cu3O6+x -coated conductors with minimized coupling losses
Authors:
G. A. Levin,
P. N. Barnes,
J. W. Kell,
N. Amemiya,
Z. Jiang,
K. Yoda,
F. Kimura
Abstract:
We report an experimental approach to making multifilament coated conductors with low losses in applied time-varying magnetic field. Previously, the multifilament conductors obtained for that purpose by laser ablation suffered from high coupling losses. Here we report how this problem can be solved. When the substrate metal in the grooves segregating the filaments is exposed to oxygen, it forms…
▽ More
We report an experimental approach to making multifilament coated conductors with low losses in applied time-varying magnetic field. Previously, the multifilament conductors obtained for that purpose by laser ablation suffered from high coupling losses. Here we report how this problem can be solved. When the substrate metal in the grooves segregating the filaments is exposed to oxygen, it forms high resistivity oxides that electrically insulate the stripes from each other and from the substrate. As the result, the coupling loss has become negligible over the entire range of tested parameters (magnetic field amplitudes B and frequencies f) available to us.
△ Less
Submitted 11 May, 2006;
originally announced May 2006.
-
Coupling losses and transverse resistivity of multifilament YBCO coated superconductors
Authors:
M. Polak,
L. Krempasky,
E. Usak,
L. Jansak,
E. Demencik,
G. A. Levin,
P. N. Barnes,
D. Wehler,
B. Moenter
Abstract:
We studied the magnetization losses of four different types of filamentary YBCO coated conductors. A 10 mm wide YBCO coated conductor was subdivided into 20 filaments by laser cutting. The separation of coupling loss from the total is possible because the energy loss per cycle in samples with electrically insulated filaments has a very small frequency dependence. We measured the frequency depend…
▽ More
We studied the magnetization losses of four different types of filamentary YBCO coated conductors. A 10 mm wide YBCO coated conductor was subdivided into 20 filaments by laser cutting. The separation of coupling loss from the total is possible because the energy loss per cycle in samples with electrically insulated filaments has a very small frequency dependence. We measured the frequency dependence of the total losses in the frequency range between 0.1 Hz and 500 Hz. The coupling loss was obtained from the total by subtracting the hysteresis loss. The latter was measured at low frequencies since only hysteresis loss is non-negligible at frequencies below 1 Hz. The transverse resistivity was determined from the coupling losses; it was assumed that the sample length is equal to half of the twist pitch. The values of transverse resistivity deduced from the loss data were compared with those obtained by the four-point measurements with current flowing perpendicular to the filaments. Preliminary results indicate that the current method of laser ablation creates electrical contacts between the superconducting filaments and the substrate. This was also confirmed by the Hall probe map** of the magnetic field in the vicinity of the tape. The measured transverse resistivity was close to the resistivity of the substrate (Hastelloy).
△ Less
Submitted 17 February, 2006;
originally announced February 2006.
-
Magnetization Losses in Multiply Connected YBa2Cu3O6+x Coated Conductors
Authors:
G. A. Levin,
P. N. Barnes,
Naoyuki Amemiya,
Satoshi Kasai,
Keiji Yoda,
Zhenan Jiang,
A. Polyanskii
Abstract:
We report the results of a magnetization losses study in experimental multifilament, multiply connected coated superconductors exposed to time-varying magnetic field. In these samples, the superconducting layer is divided into parallel stripes segregated by non-superconducting grooves. In order to facilitate the current sharing between the stripes and thus increase the reliability of the striate…
▽ More
We report the results of a magnetization losses study in experimental multifilament, multiply connected coated superconductors exposed to time-varying magnetic field. In these samples, the superconducting layer is divided into parallel stripes segregated by non-superconducting grooves. In order to facilitate the current sharing between the stripes and thus increase the reliability of the striated conductors, a sparse network of superconducting bridges is superimposed on the striated film. We find that the presence of the bridges does not substantially increase the magnetization losses, both hysteresis and coupling, as long as the number of bridges per length of the sample is not large. These results indicate that it is possible to find a reasonable compromise between the competing requirements of connectivity and loss reduction in an ac-tolerant version of the high temperature coated conductors specifically designed for ac power applications.
△ Less
Submitted 21 October, 2005;
originally announced October 2005.
-
The Integration of YBCO Coated Conductors into Magnets and Rotating Machinery
Authors:
G. A. Levin,
P. N. Barnes
Abstract:
The implementation of the 2nd generation high-Tc superconductors in power applications, such as electrical transformers, motors and generators requires superconducting wires that are superior to copper Litz wires at cryogenic temperatures in terms of losses in time-varying magnetic field, as well as in engineering current density. Another problem is to find a way to make practical coils and arma…
▽ More
The implementation of the 2nd generation high-Tc superconductors in power applications, such as electrical transformers, motors and generators requires superconducting wires that are superior to copper Litz wires at cryogenic temperatures in terms of losses in time-varying magnetic field, as well as in engineering current density. Another problem is to find a way to make practical coils and armatures out of flat tape-like conductors with low bending strain tolerance. We discuss several novel approaches to the construction of coils and armatures based specifically on the properties of coated conductors manufactured today.
△ Less
Submitted 13 September, 2005;
originally announced September 2005.
-
Concept of Multiply Connected Superconducting Tapes
Authors:
G. A. Levin,
P. N. Barnes
Abstract:
The possibility of a substantial reduction of weight and size of electrical generators is the main incentive behind the effort to develop superconducting armature windings based on coated conductors in the form of wide tapes with large aspect ratio. The main obstacle to the application of coated superconductors in stator windings is the large losses incurred due to the ac magnetic field produced…
▽ More
The possibility of a substantial reduction of weight and size of electrical generators is the main incentive behind the effort to develop superconducting armature windings based on coated conductors in the form of wide tapes with large aspect ratio. The main obstacle to the application of coated superconductors in stator windings is the large losses incurred due to the ac magnetic field produced by the rotor's dc coils of the field windings. In the range of frequencies typical for aircraft generators, the hysteretic losses in wide tapes are unacceptably high. They can be reduced by dividing the superconducting layer into multiple filaments separated by non-superconducting barriers. However, the lack of current sharing between the filaments makes the conductor vulnerable to the localized defects, so that a single blockage can impede the flow of transport current through the whole length of a given filament. We present estimates of reliability as well as the magnetization losses in multiply connected superconductors. In this type of superconducting tape, a sparse network of superconducting bridges, which allows for current sharing, connects the filaments. The trade-off between the different types of losses and the connectivity requirement imposes restrictions on the number of filaments and properties of the network of bridges.
△ Less
Submitted 16 November, 2004;
originally announced November 2004.
-
AC Loss in Striped (Filamentary) YBCO Coated Conductors Leading to Designs for High Frequencies and Field-Sweep Amplitudes
Authors:
M. D. Sumption,
P. N. Barnes,
E. W. Collings
Abstract:
AC losses of YBCO coated conductors are investigated by calculation and experiment for the higher frequency regime. Previous research using YBCO film deposited onto single crystal substrates demonstrated the effectiveness of filamentary subdivision as a technique for AC loss reduction. As a result of these studies the idea of subdividing YBCO coated conductors (both YBCO, overlayer, and even und…
▽ More
AC losses of YBCO coated conductors are investigated by calculation and experiment for the higher frequency regime. Previous research using YBCO film deposited onto single crystal substrates demonstrated the effectiveness of filamentary subdivision as a technique for AC loss reduction. As a result of these studies the idea of subdividing YBCO coated conductors (both YBCO, overlayer, and even underlayer) into such stripes suggested itself. The suggestion was implemented by burning grooves into samples of coated conductor using laser micromachining. Various machining parameters were investigated, and the stri** and slicing characteristics are presented. Loss measurements were performed on unstriped as well as striped samples by the pick-up coil technique at frequencies of from 50-200 Hz at field sweep amplitudes of up to 150 mT. The effect of soft ferromagnetic Fe shielding was also investigated. The results of the experiments form a starting point for a more general study of reduced loss coated conductor design (including hysteretic, coupling, normal eddy current, and transport losses) projected into higher ranges of frequency and field sweep amplitude with transformer and all cryogenic motor/generator applications in mind.
△ Less
Submitted 12 October, 2004;
originally announced October 2004.
-
Magnetization Losses in Multifilament Coated Superconductors
Authors:
G. A. Levin,
P. N. Barnes,
N. Amemiya,
S. Kasai,
K. Yoda,
Z. Jiang
Abstract:
We report the results of a study of the magnetization losses in experimental multifilament, as well as control (uniform), coated superconductors exposed to time-varying magnetic field of various frequencies. Both the hysteresis loss, proportional to the sweep rate of the applied magnetic field, and the coupling loss, proportional to the square of the sweep rate, have been observed. A scaling is…
▽ More
We report the results of a study of the magnetization losses in experimental multifilament, as well as control (uniform), coated superconductors exposed to time-varying magnetic field of various frequencies. Both the hysteresis loss, proportional to the sweep rate of the applied magnetic field, and the coupling loss, proportional to the square of the sweep rate, have been observed. A scaling is found that allows us to quantify each of these contributions and extrapolate the results of the experiment beyond the envelope of accessible field amplitude and frequency. The combined loss in the multifilament conductor is reduced by about 90% in comparison with the uniform conductor at full field penetration at sweep rate as high as 3T/s.
△ Less
Submitted 9 September, 2004;
originally announced September 2004.
