-
ALMA Band 9 upgrade: a feasibility study
Authors:
S. Realini,
R. Hesper,
J. Barkhof,
A. Baryshev
Abstract:
We present the results of a study on the feasibility of upgrading the existing ALMA Band 9 receivers (602-720 GHz). In the current configuration, each receiver is a dual channel heterodyne system capable of detecting orthogonally polarized signals through the use of a wire grid and a compact arrangement of mirrors. The main goals of the study are the upgrade of the mixer architecture from Double-S…
▽ More
We present the results of a study on the feasibility of upgrading the existing ALMA Band 9 receivers (602-720 GHz). In the current configuration, each receiver is a dual channel heterodyne system capable of detecting orthogonally polarized signals through the use of a wire grid and a compact arrangement of mirrors. The main goals of the study are the upgrade of the mixer architecture from Double-Sideband (DSB) to Sideband-separating (2SB), the extension of the IF and RF bandwidth, and the analysis of the possibilities of improving the polarimetric performance. We demonstrate the performance of 2SB mixers both in the lab and on-sky with the SEPIA660 receiver at APEX, which shows image rejection ratios exceeding 20 dB and can perform successful observations of several spectral lines close to the band edges. The same architecture in ALMA Band 9 would lead to an increase in the effective spectral sensitivity and a gain of a factor two in observation time. We set up also an electromagnetic model of the optics to simulate the polarization performance of the receivers, which is currently limited by the cross-polar level and the beam squint, i.e. pointing mismatch between the two polarizations. We present the results of the simulations compared to the measurements and we conclude that the use of a polarizing grid is the main responsible of the limitations.
△ Less
Submitted 10 October, 2023;
originally announced October 2023.
-
APEX-SEPIA660 Early Science: Gas at densities above $10^7$ cm$^{-3}$ towards OMC-1
Authors:
A. Hacar,
M. R. Hogerheijde,
D. Harsono,
S. Portegies Zwart,
C. De Breuck,
K. Torstensson,
W. Boland,
A. M. Baryshev,
R. Hesper,
J. Barkhof,
J. Adema,
M. E. Bekema,
A. Koops,
A. Khudchenko,
R. Stark
Abstract:
Context. The star formation rates and stellar densities found in young massive clusters suggest that these stellar systems originate from gas at densities n(H$_2$) $>10^7$ cm$^{-3}$. Until today, however, the physical characterization of this ultra high density material remains largely unconstrained in observations. Aims. We investigated the density properties of the star-forming gas in the OMC-1…
▽ More
Context. The star formation rates and stellar densities found in young massive clusters suggest that these stellar systems originate from gas at densities n(H$_2$) $>10^7$ cm$^{-3}$. Until today, however, the physical characterization of this ultra high density material remains largely unconstrained in observations. Aims. We investigated the density properties of the star-forming gas in the OMC-1 region located in the vicinity of the Orion Nebula Cluster (ONC). Methods. We mapped the molecular emission at 652 GHz in OMC-1 as part of the APEX-SEPIA660 Early Science. Results. We detect bright and extended N$_2$H$^+$ (J=7-6) line emission along the entire OMC-1 region. Comparisons with previous ALMA data of the (J=1-0) transition and radiative transfer models indicate that the line intensities observed in this N$_2$H$^+$ (7-6) line are produced by large mass reservoirs of gas at densities n(H$_2$) $>10^7$ cm$^{-3}$. Conclusions. The first detection of this N$_2$H$^+$ (7-6) line at parsec-scales demonstrates the extreme density conditions of the star-forming gas in young massive clusters such as the ONC. Our results highlight the unique combination of sensitivity and map** capabilities of the new SEPIA660 receiver for the study of the ISM properties at high frequencies.
△ Less
Submitted 26 September, 2020;
originally announced September 2020.
-
SEPIA - a new single pixel receiver at the APEX Telescope
Authors:
V. Belitsky,
I. Lapkin,
M. Fredrixon,
D. Meledin,
E. Sundin,
B. Billade,
S. -E. Ferm,
A. Pavolotsky,
H. Rashid,
M. Strandberg,
V. Desmaris,
A. Ermakov,
S. Krause,
M. Olberg,
P. Aghdam,
S. Shafiee,
P. Bergman,
E. De Beck,
H. Olofsson,
J. Conway,
C. De Breuck,
K. Immer,
P. Yagoubov,
F. M. Montenegro-Montes,
K. Torstensson
, et al. (9 additional authors not shown)
Abstract:
Context: We describe the new SEPIA (Swedish-ESO PI Instrument for APEX) receiver, which was designed and built by the Group for Advanced Receiver Development (GARD), at Onsala Space Observatory (OSO) in collaboration with ESO. It was installed and commissioned at the APEX telescope during 2015 with an ALMA Band 5 receiver channel and updated with a new frequency channel (ALMA Band 9) in February 2…
▽ More
Context: We describe the new SEPIA (Swedish-ESO PI Instrument for APEX) receiver, which was designed and built by the Group for Advanced Receiver Development (GARD), at Onsala Space Observatory (OSO) in collaboration with ESO. It was installed and commissioned at the APEX telescope during 2015 with an ALMA Band 5 receiver channel and updated with a new frequency channel (ALMA Band 9) in February 2016. Aims: This manuscript aims to provide, for observers who use the SEPIA receiver, a reference in terms of the hardware description, optics and performance as well as the commissioning results. Methods: Out of three available receiver cartridge positions in SEPIA, the two current frequency channels, corresponding to ALMA Band 5, the RF band 158--211 GHz, and Band 9, the RF band 600--722 GHz, provide state-of-the-art dual polarization receivers. The Band 5 frequency channel uses 2SB SIS mixers with an average SSB noise temperature around 45K with IF (intermediate frequency) band 4--8 GHz for each sideband providing total 4x4 GHz IF band. The Band 9 frequency channel uses DSB SIS mixers with a noise temperature of 75--125K with IF band 4--12 GHz for each polarization. Results: Both current SEPIA receiver channels are available to all APEX observers.
△ Less
Submitted 20 December, 2017;
originally announced December 2017.
-
Ultra-pure digital sideband separation at sub-millimeter wavelengths
Authors:
R. Finger,
F. P. Mena,
A. Barishev,
A. Khudchenko,
R. Rodriguez,
E. Huaracan,
A. Alvear,
J. Barkhof,
R. Hesper,
L. Bronfman
Abstract:
Deep spectral-line surveys in the mm and sub-mm range can detect thousands of lines per band uncovering the rich chemistry of molecular clouds, star forming regions and circumstellar envelopes, among others objects. The ability to study the faintest features of spectroscopic observation is, nevertheless, limited by a number of factors. The most important are the source complexity (line density), l…
▽ More
Deep spectral-line surveys in the mm and sub-mm range can detect thousands of lines per band uncovering the rich chemistry of molecular clouds, star forming regions and circumstellar envelopes, among others objects. The ability to study the faintest features of spectroscopic observation is, nevertheless, limited by a number of factors. The most important are the source complexity (line density), limited spectral resolution and insufficient sideband (image) rejection (SRR). Dual Sideband (2SB) millimeter receivers separate upper and lower sideband rejecting the unwanted image by about 15 dB, but they are difficult to build and, until now, only feasible up to about 500 GHz (equivalent to ALMA Band 8). For example ALMA Bands 9 (602-720 GHz) and 10 (787-950 GHz) are currently DSB receivers. Aims: This article reports the implementation of an ALMA Band 9 2SB prototype receiver that makes use of a new technique called calibrated digital sideband separation. The new method promises to ease the manufacturing of 2SB receivers, dramatically increase sideband rejection and allow 2SB instruments at the high frequencies currently covered only by Double Sideband (DSB) or bolometric detectors. Methods: We made use of a Field Programmable Gate Array (FPGA) and fast Analog to Digital Converters (ADCs) to measure and calibrate the receiver's front end phase and amplitude imbalances to achieve sideband separation beyond the possibilities of purely analog receivers. The technique could in principle allow the operation of 2SB receivers even when only imbalanced front ends can be built, particularly at very high frequencies. Results: This digital 2SB receiver shows an average sideband rejection of 45.9 dB while small portions of the band drop below 40 dB. The performance is 27 dB (a factor of 500) better than the average performance of the proof-of-concept Band 9 purely-analog 2SB prototype receiver.
△ Less
Submitted 14 October, 2015; v1 submitted 16 September, 2015;
originally announced September 2015.
-
The ALMA Band 9 receiver - Design, construction, characterization, and first light
Authors:
A. M. Baryshev,
R. Hesper,
F. P. Mena,
T. M. Klapwijk,
T. A. van Kempen,
M. R. Hogerheijde,
B. D. Jackson,
J. Adema,
G. J. Gerlofsma,
M. E. Bekema,
J. Barkhof,
L. H. R. de Haan-Stijkel,
M. van den Bemt,
A. Koops,
K. Keizer,
C. Pieters,
J. Koops van het Jagt,
H. H. A. Schaeffer,
T. Zijlstra,
M. Kroug,
C. F. J. Lodewijk,
K. Wielinga,
W. Boland,
M. W. M. de Graauw,
E. F. van Dishoeck
, et al. (2 additional authors not shown)
Abstract:
We describe the design, construction, and characterization of the Band 9 heterodyne receivers (600-720 GHz) for the Atacama Large Millimeter / submillimeter Array (ALMA). The ALMA Band 9 receiver units ("cartridges"), which are installed in the telescope's front end, have been designed to detect and down-convert two orthogonal linear polarization components of the light collected by the ALMA anten…
▽ More
We describe the design, construction, and characterization of the Band 9 heterodyne receivers (600-720 GHz) for the Atacama Large Millimeter / submillimeter Array (ALMA). The ALMA Band 9 receiver units ("cartridges"), which are installed in the telescope's front end, have been designed to detect and down-convert two orthogonal linear polarization components of the light collected by the ALMA antennas. The light entering the front end is refocused with a compact arrangement of mirrors, which is fully contained within the cartridge. The arrangement contains a grid to separate the polarizations and two beam splitters to combine each resulting beam with a local oscillator signal. The combined beams are fed into independent double-sideband mixers, each with a corrugated feedhorn coupling the radiation by way of a waveguide with backshort cavity into an impedance-tuned SIS junction that performs the heterodyne down-conversion. Finally, the generated intermediate frequency signals are amplified by cryogenic and room-temperature HEMT amplifiers and exported to the telescope's back end for further processing and, finally, correlation. The receivers have been constructed and tested in the laboratory and they show excellent performance, complying with ALMA requirements. Performance statistics on all 73 Band 9 receivers are reported. On-sky characterization and tests of the performance of the Band 9 cartridges are presented using commissioning data.
△ Less
Submitted 6 March, 2015;
originally announced March 2015.
